summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-10-03Merge branch 'pci/controller/hv'Bjorn Helgaas
- Remove unused hv_msi_free() parameter (Nam Cao) * pci/controller/hv: PCI: hv: Remove unused parameter of hv_msi_free()
2025-10-03Merge branch 'pci/controller/dwc-edma'Bjorn Helgaas
- Verify that if DT specifies a single IRQ for all eDMA channels, it is named 'dma' (Niklas Cassel) - Remove qcom edma.nr_irqs initialization, which is redundant since dw_pcie_edma_irq_verify() initializes it based on whether the DT contains 'dma' (single IRQ) or 'dmaX' (multiple IRQs) (Niklas Cassel) * pci/controller/dwc-edma: PCI: qcom-ep: Remove redundant edma.nr_irqs initialization PCI: dwc: Verify the single eDMA IRQ in dw_pcie_edma_irq_verify()
2025-10-03Merge branch 'pci/controller/dwc'Bjorn Helgaas
- Add support for x16 in devicetree 'num-lanes' property (Konrad Dybcio) * pci/controller/dwc: PCI: dwc: Support 16-lane operation
2025-10-03Merge branch 'pci/controller/amd-mdb'Bjorn Helgaas
- Update DT binding example to separate PERST# to a Root Port stanza to make multiple Root Ports possible in the future (Sai Krishna Musham) - Add driver support for Root Port PERST# (Sai Krishna Musham) * pci/controller/amd-mdb: PCI: amd-mdb: Add support for PCIe RP PERST# signal handling dt-bindings: PCI: amd-mdb: Add example usage of reset-gpios for PCIe RP PERST#
2025-10-03Merge branch 'pci/endpoint'Bjorn Helgaas
- Check for errors returned from pci_epc_get(), which returns IS_ERR(), not NULL on error (Dan Carpenter) - Fix pci_endpoint_test_ioctl() array underflow (Dan Carpenter) - Document sysfs interface for BAR assignment of vNTB endpoint functions (Jerome Brunet) - Drop superfluous pci_epc_features initialization for unsupported features; we only have to mention features that *are* supported (Niklas Cassel) - Skip IRQ tests if the IRQ is out of range (Christian Bruel) - Fix pci-epf-test for controllers with fixed-size BARs smaller than requested by the test (Marek Vasut) - Restore inbound translation when disabling doorbell so the doorbell test case can be run more than once (Niklas Cassel) - Check for NULL before releasing DMA channels to avoid a NULL pointer dereference (Shin'ichiro Kawasaki) - Convert tegra194 interrupt number to MSI vector to fix endpoint Kselftest MSI_TEST test case (Niklas Cassel) - Set tegra_pcie_epc_features.msi_capable so the pci_endpoint_test can use the optimal IRQ type (Niklas Cassel) - Reset tegra194 BARs when running in endpoint mode so the BAR tests don't overwrite the ATU settings in BAR4 (Niklas Cassel) - Handle errors in tegra194 BPMP transactions so we don't mistakenly skip future PERST# assertion (Vidya Sagar) * pci/endpoint: PCI: tegra194: Handle errors in BPMP response PCI: tegra194: Reset BARs when running in PCIe endpoint mode PCI: tegra194: Set pci_epc_features::msi_capable to true PCI: tegra194: Fix broken tegra_pcie_ep_raise_msi_irq() PCI: endpoint: pci-epf-test: Add NULL check for DMA channels before release PCI: endpoint: pci-epf-test: Fix doorbell test support PCI: endpoint: pci-epf-test: Limit PCIe BAR size for fixed BARs selftests: pci_endpoint: Skip IRQ test if IRQ is out of range. misc: pci_endpoint_test: Cleanup extra 0 initialization misc: pci_endpoint_test: Skip IRQ tests if irq is out of range PCI: endpoint: Drop superfluous pci_epc_features initialization Documentation: PCI: endpoint: Document BAR assignment misc: pci_endpoint_test: Fix array underflow in pci_endpoint_test_ioctl() PCI: endpoint: pci-ep-msi: Fix NULL vs IS_ERR() check in pci_epf_write_msi_msg()
2025-10-03Merge branch 'pci/capability-search'Bjorn Helgaas
- Simplify __pci_find_next_cap_ttl() by replacing magic numbers with #defines, extracting fields with FIELD_GET(), etc (Hans Zhang) - Convert __pci_find_next_cap_ttl() to a PCI_FIND_NEXT_CAP() macro that takes a config space accessor function so we can also use it in cases where the usual config accessors aren't available (Hans Zhang) - Similarly convert pci_find_next_ext_capability() to a PCI_FIND_NEXT_EXT_CAP() macro (Hans Zhang) - Implement dwc, dwc endpoint, and cadence capability search interfaces on top of PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP(), replacing the previous duplicated code (Hans Zhang) - Search for capabilities in the cadence core instead of hard-coding their offsets, which are subject to change (Hans Zhang) * pci/capability-search: PCI: cadence: Use cdns_pcie_find_*capability() to avoid hardcoding offsets PCI: cadence: Implement capability search using PCI core APIs PCI: dwc: ep: Implement capability search using PCI core APIs PCI: dwc: Implement capability search using PCI core APIs PCI: Refactor extended capability search into PCI_FIND_NEXT_EXT_CAP() PCI: Refactor capability search into PCI_FIND_NEXT_CAP() PCI: Clean up __pci_find_next_cap_ttl() readability
2025-10-03Merge branch 'pci/switchtec'Bjorn Helgaas
- Replace manual locks with guard to simplify code (Erick Karanja) * pci/switchtec: PCI: switchtec: Replace manual locks with guard
2025-10-03Merge branch 'pci/virtualization'Bjorn Helgaas
- Add rescan/remove locking when enabling/disabling SR-IOV, which solves list corruption on s390, where disabling SR-IOV also generates hotplug events (Niklas Schnelle) - Add lockdep assertion in pci_stop_and_remove_bus_device() to catch device removal without appropriate locking (Niklas Schnelle) * pci/virtualization: PCI: Add lockdep assertion in pci_stop_and_remove_bus_device() PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV
2025-10-03Merge branch 'pci/resource'Bjorn Helgaas
- Ensure relaxed tail alignment does not increase min_align when computing bridge window size, to fix a regression (Ilpo Järvinen) - Fix bridge window size computation to fix a regression for devices with undefined PCI class, e.g., Samsung [144d:a5a5] (Ilpo Järvinen) - Fix error handling during resource resize to fix a regression in amdgpu (Ilpo Järvinen) - Align m68k pcibios_enable_device() with other arches (Ilpo Järvinen) - Remove several sparc pcibios_enable_device() implementations that don't do anything beyond what pci_enable_resources() does (Ilpo Järvinen) - Remove mips pcibios_enable_resources() and use pci_enable_resources() instead (Ilpo Järvinen) - Refactor and simplify find_bus_resource_of_type() (Ilpo Järvinen) - Claim bridge windows before setting them up (Ilpo Järvinen) - Disable non-claimed bridge windows so the kernel's view matches the hardware configuration (Ilpo Järvinen) - Use pci_release_resource() instead of release_resource() to reduce code duplication and increase consistency (Ilpo Järvinen) - Enable bridges even if bridge window assignment fails (Ilpo Järvinen) - Preserve bridge window resource type flags when assignment fails because we may need it later (Ilpo Järvinen) - Add bridge window selection functions to make the selection consistent across the several places that do this (Ilpo Järvinen) - Warn if bridge window cannot be released when resizing BAR (Ilpo Järvinen) - Set up bridge resources before enumerating children so we can check whether child resources are inside bridge windows (Ilpo Järvinen) * pci/resource: PCI: Set up bridge resources earlier PCI: Don't print stale information about resource PCI: Alter misleading recursion to pci_bus_release_bridge_resources() PCI: Pass bridge window to pci_bus_release_bridge_resources() PCI: Add pci_setup_one_bridge_window() PCI: Refactor remove_dev_resources() to use pbus_select_window() PCI: Refactor distributing available memory to use loops PCI: Use pbus_select_window_for_type() during mem window sizing PCI: Use pbus_select_window() in space available checker PCI: Rename resource variable from r to res PCI: Use pbus_select_window_for_type() during IO window sizing PCI: Use pbus_select_window() during BAR resize PCI: Warn if bridge window cannot be released when resizing BAR PCI: Fix finding bridge window in pci_reassign_bridge_resources() PCI: Add bridge window selection functions PCI: Add defines for bridge window indexing PCI: Preserve bridge window resource type flags PCI: Enable bridge even if bridge window fails to assign PCI: Use pci_release_resource() instead of release_resource() PCI: Disable non-claimed bridge window PCI: Always claim bridge window before its setup PCI: Refactor find_bus_resource_of_type() logic checks PCI: Move find_bus_resource_of_type() earlier MIPS: PCI: Use pci_enable_resources() sparc/PCI: Remove pcibios_enable_device() as they do nothing extra m68k/PCI: Use pci_enable_resources() in pcibios_enable_device() PCI: Fix failure detection during resource resize PCI: Fix pdev_resources_assignable() disparity PCI: Ensure relaxed tail alignment does not increase min_align
2025-10-03Merge branch 'pci/pwrctrl'Bjorn Helgaas
- Fix a double cleanup of regulators if devm_add_action_or_reset() fails (Geert Uytterhoeven) * pci/pwrctrl: PCI/pwrctrl: Fix device leak at device stop PCI/pwrctrl: Fix device and OF node leak at bus scan PCI/pwrctrl: Fix device leak at registration PCI/pwrctrl: Fix double cleanup on devm_add_action_or_reset() failure
2025-10-03Merge branch 'pci/pm'Bjorn Helgaas
- If a device has already been disconnected, e.g., by a hotplug removal, don't bother trying to resume it to D0 when detaching the driver (Mario Limonciello) - Ensure devices are powered up before config reads for 'max_link_width', 'current_link_speed', 'current_link_width', 'secondary_bus_number', and 'subordinate_bus_number' sysfs files (Brian Norris) * pci/pm: PCI/sysfs: Ensure devices are powered for config reads PCI/PM: Skip resuming to D0 if device is disconnected
2025-10-03Merge branch 'pci/p2pdma'Bjorn Helgaas
- Free struct p2p_pgmap, not a member within it, in the pci_p2pdma_add_resource() error path (Sungho Kim) - Make pci_has_p2pmem() static (Leon Romanovsky) * pci/p2pdma: PCI/P2PDMA: Reduce scope of pci_has_p2pmem() PCI/P2PDMA: Fix incorrect pointer usage in devm_kfree() call
2025-10-03Merge branch 'pci/of'Bjorn Helgaas
- Leave parent unit address 0 in 'interrupt-map' so we can build this property even when interrupt controllers lack 'reg' properties (Lorenzo Pieralisi) * pci/of: PCI: of: Update parent unit address generation in of_pci_prop_intr_map()
2025-10-03Merge branch 'pci/msi'Bjorn Helgaas
- Add quirk to disable MSI on RDC PCI to PCIe bridges (Marcos Del Sol Vives) * pci/msi: PCI: Disable MSI on RDC PCI to PCIe bridges
2025-10-03Merge branch 'pci/hotplug'Bjorn Helgaas
- Clean up whitespace in messages (Colin Ian King) * pci/hotplug: PCI: hotplug: Clean up spaces in messages
2025-10-03Merge branch 'pci/enumeration'Bjorn Helgaas
- Use PCI_HEADER_TYPE_* defines, not hard-coded values (Ilpo Järvinen) - Clean up early_dump_pci_device() to avoid hard-coded values (Ilpo Järvinen) - Clean up pci_scan_child_bus_extend() loop to avoid hard-coded values (Ilpo Järvinen) - Add a Xeon 6 quirk to disable Extended Tags and limit Max Read Request Size to 128B to avoid a performance issue (Ilpo Järvinen) * pci/enumeration: PCI: Add Extended Tag + MRRS quirk for Xeon 6 PCI: Clean up pci_scan_child_bus_extend() loop PCI: Clean up early_dump_pci_device() PCI: Use header type defines in pci_setup_device()
2025-10-03Merge branch 'pci/aspm'Bjorn Helgaas
- Enable all ClockPM and ASPM states for devicetree platforms, since there's typically no firmware that enables ASPM (Manivannan Sadhasivam) - Remove the qcom code that enabled ASPM (Manivannan Sadhasivam) * pci/aspm: PCI: qcom: Remove custom ASPM enablement code PCI/ASPM: Enable all ClockPM and ASPM states for devicetree platforms
2025-10-03mfd: ls2kbmc: check for devm_mfd_add_devices() failureDan Carpenter
Call pci_disable_device() if devm_mfd_add_devices() fails. Fixes: 0d64f6d1ffe9 ("mfd: ls2kbmc: Introduce Loongson-2K BMC core driver") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Message-ID: <e3e7cf2cfded48c9fca8bc981c54bbcb7edb9580.1759478975.git.dan.carpenter@linaro.org> Signed-off-by: Corey Minyard <corey@minyard.net>
2025-10-03mfd: ls2kbmc: Fix an IS_ERR() vs NULL check in probe()Dan Carpenter
The devm_kzalloc() function returns NULL on error so check for that instead of error pointers. Fixes: d952bba3fbb5 ("mfd: ls2kbmc: Add Loongson-2K BMC reset function support") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Message-ID: <df80c6d61229eb8f877c3694525c0f97e64a43e8.1759478975.git.dan.carpenter@linaro.org> Signed-off-by: Corey Minyard <corey@minyard.net>
2025-10-03Merge tag 'nand/for-6.18' into mtd/nextMiquel Raynal
* Raw NAND: - Add support for Loongson-2K1000 and Loongson-2K0500 NAND controllers, including extra features, such as chip select and 6-byte NAND ID reading support. - Drop the s3c2410 driver. * SPI NAND: - Important SPI NAND continuous read improvements and fixes. - Add support for FudanMicro FM25S01A. - Add support for continuous reads in Gigadevice vendor driver. * ECC: - Add support for the Realtek ECC engine. This PR comes with the usual amount of various miscellaneous fixes. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-10-03Merge tag 'spi-nor/for-6.18' into mtd/nextMiquel Raynal
SPI NOR changes for 6.18 Notable changes: - Some flashes can't perform reads or writes with start or end being an odd number in Octal DTR mode. File systems like UBIFS can request such reads or writes, causing the transaction to error out. Pad the read or write transactions with extra bytes to avoid this problem. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-10-03drm/sitronix/st7571-i2c: reset position before clearing displayMarcus Folkesson
We cannot know where the write pointer is, always reset position to (0,0) before clearing display. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/r/20250913-st7571-reset-v1-1-ae5f58acdf8d@gmail.com Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
2025-10-03drm/bridge: refcount last_bridge in drm_atomic_bridge_chain_select_bus_fmts()Luca Ceresoli
Get a reference for the last_bridge when it is obtained and release it using a cleanup action. Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20250924-b4-drm-bridge-alloc-getput-drm_atomic_bridge_chain_select_bus_fmts-v1-1-f8c2efdb783f@bootlin.com Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
2025-10-03drm/display: bridge_connector: get/put the stored bridgesLuca Ceresoli
drm_bridge_connector_init() takes eight pointers to various bridges, some of which can be identical, and stores them in pointers inside struct drm_bridge_connector. Get a reference to each of the taken bridges and put it on cleanup. This is tricky because the pointers are currently stored directly in the drm_bridge_connector in the loop, but there is no nice and clean way to put those pointers on error return paths. To overcome this, store all pointers in temporary local variables with a cleanup action, and only on success copy them into struct drm_bridge_connector (getting another ref while copying). Additionally four of these pointers (edid, hpd, detect and modes) can be written in multiple loop iterations, in order to eventually store the last matching bridge. However, when one of those pointers is overwritten, we need to put the reference that we got during the previous assignment. Add a drm_bridge_put() before writing them to handle this. Finally, there is also a function-local panel_bridge pointer taken inside the loop and used after the loop. Use a cleanup action as well to ensure it is put on return. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250926-drm-bridge-alloc-getput-bridge-connector-v2-1-138b4bb70576@bootlin.com Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
2025-10-02drm/xe/xe_late_bind_fw: Initialize uval variable in xe_late_bind_fw_num_fans()Mallesh Koujalagi
Initialize the uval variable to 0 in xe_late_bind_fw_num_fans() to fix a potential use of uninitialized variable warning and ensure predictable behavior. The variable is passed by reference to xe_pcode_read() which should populate it on success, but initializing it to 0 provides a safe default value and follows kernel coding best practices. v2: - uval = 0 which serves as both a safe default and the fallback value when the pcode read operation fails. v3: - Handle MMIO failure (Rodrigo) - The function should probably return the error and make the uval as pointer-argument, like the pcode_read. - Change the caller of this function to propagate the error upwards if mmio failed. Fixes: 45832bf9c10f3 ("drm/xe/xe_late_bind_fw: Initialize late binding firmware") Signed-off-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com> Link: https://lore.kernel.org/r/20251002005648.3185636-1-mallesh.koujalagi@intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit 07abc16c14693df703763c45e9fc0abfefc927d5) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-10-02drm/gpusvm, drm/xe: Fix userptr to not allow device private pagesThomas Hellström
When userptr is used on SVM-enabled VMs, a non-NULL hmm_range::dev_private_owner value might mean that hmm_range_fault() attempts to return device private pages. Either that will fail, or the userptr code will not know how to handle those. Use NULL for hmm_range::dev_private_owner to migrate such pages to system. In order to do that, move the struct drm_gpusvm::device_private_page_owner field to struct drm_gpusvm_ctx::device_private_page_owner so that it doesn't remain immutable over the drm_gpusvm lifetime. v2: - Don't conditionally compile xe_svm_devm_owner(). - Kerneldoc xe_svm_devm_owner(). Fixes: 9e9787414882 ("drm/xe/userptr: replace xe_hmm with gpusvm") Cc: Matthew Auld <matthew.auld@intel.com> Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://lore.kernel.org/r/20250930122752.96034-1-thomas.hellstrom@linux.intel.com (cherry picked from commit ad298d9ec957414dbf3d51f3c8bca4b6d2416c0c) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-10-02drm/xe/xe_late_bind_fw: Fix missing initialization of variable offsetColin Ian King
The variable offset is not being initialized, and it is only set inside a for-loop if entry->name is the same as manifest_entry. In the case where it is not initialized a non-zero check on offset is potentialy checking a bogus uninitalized value. Fix this by initializing offset to zero. Fixes: efa29317a553 ("drm/xe/xe_late_bind_fw: Extract and print version info") Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Badal Nilawar <badal.nilawar@intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Link: https://lore.kernel.org/r/20250924102208.9216-1-colin.i.king@gmail.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit 20f3b28e2e07747fd27301f0f5deb3cb569ee15c) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-10-02drm/xe/bo: Fix an idle assertion for local bosThomas Hellström
Before calling ttm_bo_populate() in the CPU fault path of a bo, we assert that the bo is not being migrated. However, for local bos we share the reservation object with other local bos that might be in the process of being migrated. Also some VM operations may attach USAGE_KERNEL fences to the common reservation object and trigger false positives from the assert. So remove the assert and instead wait for bo idle. This may unnecessarily wait for idle in some cases but since we're doing this wait later in the fault path anyway we might as well do it here as well. This fixes warnings like: Sep 25 14:56:23 desky kernel: ------------[ cut here ]------------ Sep 25 14:56:23 desky kernel: xe 0000:03:00.0: [drm] Assertion `dma_resv_test_signaled(tbo->base.resv, DMA_RESV_USAGE_KERNEL) || (tbo->ttm && ttm_tt_is_populated(tbo->ttm))` failed! platform: BATTLEMAGE subplatform: 1 graphics: Xe2_HPG 20.01 step A0 media: Xe2_HPM 13.01 step A1 Sep 25 14:56:23 desky kernel: WARNING: CPU: 6 PID: 24767 at drivers/gpu/drm/xe/xe_bo.c:1748 xe_bo_fault_migrate+0x1bb/0x300 [xe] Sep 25 14:56:23 desky kernel: Modules linked in: cpuid dm_crypt xt_conntrack nft_chain_nat xt_MASQUERADE nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 bridge stp llc xfrm_user xfr> Sep 25 14:56:23 desky kernel: snd_soc_sdca snd_seq_midi prime_numbers coretemp snd_seq_midi_event drm_ttm_helper snd_hda_codec drm_buddy drm_exec snd_rawmidi snd_soc_core snd_hda_cor> Sep 25 14:56:23 desky kernel: CPU: 6 UID: 1000 PID: 24767 Comm: steamwebhelper Tainted: G U W 6.17.0-rc7+ #32 PREEMPT(voluntary) Sep 25 14:56:23 desky kernel: Tainted: [U]=USER, [W]=WARN Sep 25 14:56:23 desky kernel: Hardware name: Micro-Star International Co., Ltd. MS-7D36/PRO Z690-P DDR4 (MS-7D36), BIOS A.A1 10/18/2022 Sep 25 14:56:23 desky kernel: RIP: 0010:xe_bo_fault_migrate+0x1bb/0x300 [xe] Sep 25 14:56:23 desky kernel: Code: fa 64 29 f9 48 c7 c7 40 e0 d3 c1 51 48 c7 c1 c0 e3 d3 c1 52 4c 8b 45 c0 41 50 44 8b 4d c8 4d 89 e0 48 8b 55 a8 e8 25 27 95 ef <0f> 0b 48 83 c4 40 4> Sep 25 14:56:23 desky kernel: RSP: 0000:ffffae1ca88c7b10 EFLAGS: 00010286 Sep 25 14:56:23 desky kernel: RAX: 0000000000000000 RBX: ffff8d7cfd7e6800 RCX: 0000000000000027 Sep 25 14:56:23 desky kernel: RDX: ffff8d845019cec8 RSI: 0000000000000001 RDI: ffff8d845019cec0 Sep 25 14:56:23 desky kernel: RBP: ffffae1ca88c7bc8 R08: 0000000000000000 R09: 0000000000000000 Sep 25 14:56:23 desky kernel: R10: 0000000000000000 R11: 0000000000000004 R12: ffffffffc1db1faa Sep 25 14:56:23 desky kernel: R13: ffffffffc1db2ab4 R14: 0000000000000001 R15: ffffae1ca88c7bd8 Sep 25 14:56:23 desky kernel: FS: 00007fb1baf31940(0000) GS:ffff8d849c870000(0000) knlGS:0000000000000000 Sep 25 14:56:23 desky kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Sep 25 14:56:23 desky kernel: CR2: 00007fb1b2860020 CR3: 00000001705a9004 CR4: 0000000000772ef0 Sep 25 14:56:23 desky kernel: PKRU: 55555558 Sep 25 14:56:23 desky kernel: Call Trace: Sep 25 14:56:23 desky kernel: <TASK> Sep 25 14:56:23 desky kernel: xe_bo_cpu_fault_fastpath+0x11e/0x220 [xe] Sep 25 14:56:23 desky kernel: xe_bo_cpu_fault+0x84/0x410 [xe] Sep 25 14:56:23 desky kernel: ? __x64_sys_mmap+0x33/0x50 Sep 25 14:56:23 desky kernel: ? x64_sys_call+0x1b2e/0x20d0 Sep 25 14:56:23 desky kernel: ? do_syscall_64+0x9d/0x1f0 Sep 25 14:56:23 desky kernel: ? __check_object_size+0x4a/0x2e0 Sep 25 14:56:23 desky kernel: __do_fault+0x36/0x190 Sep 25 14:56:23 desky kernel: do_fault+0xcf/0x570 Sep 25 14:56:23 desky kernel: __handle_mm_fault+0x92b/0xfe0 Sep 25 14:56:23 desky kernel: ? ktime_get_mono_fast_ns+0x39/0xd0 Sep 25 14:56:23 desky kernel: handle_mm_fault+0x164/0x2c0 Sep 25 14:56:23 desky kernel: do_user_addr_fault+0x2cb/0x840 Sep 25 14:56:23 desky kernel: exc_page_fault+0x75/0x180 Sep 25 14:56:23 desky kernel: asm_exc_page_fault+0x27/0x30 Sep 25 14:56:23 desky kernel: RIP: 0033:0x7fb1bc388bb7 Sep 25 14:56:23 desky kernel: Code: 48 ff c7 48 01 fe 48 8d 54 11 80 0f 1f 84 00 00 00 00 00 c5 fe 6f 0e c5 fe 6f 56 20 c5 fe 6f 5e 40 c5 fe 6f 66 60 48 83 ee 80 <c5> fd 7f 0f c5 fd 7> Sep 25 14:56:23 desky kernel: RSP: 002b:00007ffd7814fad8 EFLAGS: 00010207 Sep 25 14:56:23 desky kernel: RAX: 00007fb1b2860000 RBX: 0000000000000690 RCX: 00007fb1b2860000 Sep 25 14:56:23 desky kernel: RDX: 00007fb1b2860610 RSI: 0000556eda79f4c0 RDI: 00007fb1b2860020 Sep 25 14:56:23 desky kernel: RBP: 00007ffd7814fb60 R08: 0000000000000000 R09: 000000012be0e000 Sep 25 14:56:23 desky kernel: R10: 00007fb1b2860000 R11: 0000000000000246 R12: 0000556edd39a240 Sep 25 14:56:23 desky kernel: R13: 00007fb1b2dcb010 R14: 0000556eda79f420 R15: 0000000000000000 Sep 25 14:56:23 desky kernel: </TASK> Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/5250 Fixes: c2ae94cf8cd8 ("drm/xe: Convert the CPU fault handler for exhaustive eviction") Cc: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://lore.kernel.org/r/20250929112649.6131-1-thomas.hellstrom@linux.intel.com (cherry picked from commit 8f1756a7ea33b352a54e6f53d76c552b3a424187) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-10-02drm/xe/vf: Don't claim support for firmware late-bind if VFMichal Wajdeczko
In general, the VFs can't load firmwares so attempt to initialize the firmware late-bind component leads to errors like: [] xe 0000:03:00.1: [drm] *ERROR* Late bind component not bound Fixes: 918bd789d62e ("drm/xe/xe_late_bind_fw: Introduce xe_late_bind_fw") Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6190 Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Badal Nilawar <badal.nilawar@intel.com> Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com> Reviewed-by: Badal Nilawar <badal.nilawar@intel.com> Link: https://lore.kernel.org/r/20250928174811.198933-3-michal.wajdeczko@intel.com (cherry picked from commit e35e288090f362be88d77b60d9846cea15df173e) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-10-02drm/xe/vf: Rename sriov_update_device_infoMichal Wajdeczko
This is a VF only function and its name should reflect that to avoid any confusion. Move the VF check to the caller side. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com> Link: https://lore.kernel.org/r/20250928174811.198933-2-michal.wajdeczko@intel.com (cherry picked from commit b88bb1eefa88f0cefc00fe5e78b1186cd8f9db78) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-10-02drm/xe/configfs: Improve doc for ctx_restore* attributesLucas De Marchi
Spell out the syntax instead of only using examples. Particularly important the <engine-class> part since that's different than engines_allowed and may confuse users. The same batch buffer is used for all engines of a certain class. Cc: Raag Jadav <raag.jadav@intel.com> Reviewed-by: Raag Jadav <raag.jadav@intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Fixes: e2a9854d806e ("drm/xe/configfs: Allow to select by class only") Link: https://lore.kernel.org/r/20250924152709.659483-4-lucas.demarchi@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit 47ca7acff4011fa322853a3612f464b959e88210) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-10-02drm/xe/configfs: Fix engine class parsingLucas De Marchi
If mask is NULL, only the engine class should be accepted, so the pattern string should be completely parsed. This should fix passing e.g. rcs0 to ctx_restore_post_bb when it's only expecting the engine class. Reported-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Closes: https://lore.kernel.org/r/20250922155544.67712-1-jonathan.cavitt@intel.com Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/aNJKnrCQmL9xS9Gv@stanley.mountain Fixes: e2a9854d806e ("drm/xe/configfs: Allow to select by class only") Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Reviewed-by: Raag Jadav <raag.jadav@intel.com> Link: https://lore.kernel.org/r/20250924152709.659483-3-lucas.demarchi@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit dd797967160b79cc0ca2d2eb05fc55436b66dce0) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-10-02drm/xe/tests: Fix build break on clang 16.0.6Michal Wajdeczko
The following error was reported when building with clang 16.0.6: In file included from drivers/gpu/drm/xe/xe_pci.c:1104: >> drivers/gpu/drm/xe/tests/xe_pci.c:214:2: error: initializer \ element is not a compile-time constant graphics_ip_xelp, ^~~~~~~~~~~~~~~~ drivers/gpu/drm/xe/tests/xe_pci.c:221:2: error: initializer \ element is not a compile-time constant media_ip_xem, ^~~~~~~~~~~~ 2 errors generated. Fix that by explicit re-definition of pre-GMDID IPs, as there are not so many of them. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202509192041.tQwdE4DS-lkp@intel.com/ Fixes: 5bb5258e357e ("drm/xe/tests: Add pre-GMDID IP descriptors to param generators") Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://lore.kernel.org/r/20250922101207.192028-1-michal.wajdeczko@intel.com (cherry picked from commit 2de80e2da74b402a9d838b8e729cd01cf94cdcbc) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-10-02Merge tag 'mm-nonmm-stable-2025-10-02-15-29' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - "ida: Remove the ida_simple_xxx() API" from Christophe Jaillet completes the removal of this legacy IDR API - "panic: introduce panic status function family" from Jinchao Wang provides a number of cleanups to the panic code and its various helpers, which were rather ad-hoc and scattered all over the place - "tools/delaytop: implement real-time keyboard interaction support" from Fan Yu adds a few nice user-facing usability changes to the delaytop monitoring tool - "efi: Fix EFI boot with kexec handover (KHO)" from Evangelos Petrongonas fixes a panic which was happening with the combination of EFI and KHO - "Squashfs: performance improvement and a sanity check" from Phillip Lougher teaches squashfs's lseek() about SEEK_DATA/SEEK_HOLE. A mere 150x speedup was measured for a well-chosen microbenchmark - plus another 50-odd singleton patches all over the place * tag 'mm-nonmm-stable-2025-10-02-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (75 commits) Squashfs: reject negative file sizes in squashfs_read_inode() kallsyms: use kmalloc_array() instead of kmalloc() MAINTAINERS: update Sibi Sankar's email address Squashfs: add SEEK_DATA/SEEK_HOLE support Squashfs: add additional inode sanity checking lib/genalloc: fix device leak in of_gen_pool_get() panic: remove CONFIG_PANIC_ON_OOPS_VALUE ocfs2: fix double free in user_cluster_connect() checkpatch: suppress strscpy warnings for userspace tools cramfs: fix incorrect physical page address calculation kernel: prevent prctl(PR_SET_PDEATHSIG) from racing with parent process exit Squashfs: fix uninit-value in squashfs_get_parent kho: only fill kimage if KHO is finalized ocfs2: avoid extra calls to strlen() after ocfs2_sprintf_system_inode_name() kernel/sys.c: fix the racy usage of task_lock(tsk->group_leader) in sys_prlimit64() paths sched/task.h: fix the wrong comment on task_lock() nesting with tasklist_lock coccinelle: platform_no_drv_owner: handle also built-in drivers coccinelle: of_table: handle SPI device ID tables lib/decompress: use designated initializers for struct compress_format efi: support booting with kexec handover (KHO) ...
2025-10-02Merge tag 'mm-stable-2025-10-01-19-00' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - "mm, swap: improve cluster scan strategy" from Kairui Song improves performance and reduces the failure rate of swap cluster allocation - "support large align and nid in Rust allocators" from Vitaly Wool permits Rust allocators to set NUMA node and large alignment when perforning slub and vmalloc reallocs - "mm/damon/vaddr: support stat-purpose DAMOS" from Yueyang Pan extend DAMOS_STAT's handling of the DAMON operations sets for virtual address spaces for ops-level DAMOS filters - "execute PROCMAP_QUERY ioctl under per-vma lock" from Suren Baghdasaryan reduces mmap_lock contention during reads of /proc/pid/maps - "mm/mincore: minor clean up for swap cache checking" from Kairui Song performs some cleanup in the swap code - "mm: vm_normal_page*() improvements" from David Hildenbrand provides code cleanup in the pagemap code - "add persistent huge zero folio support" from Pankaj Raghav provides a block layer speedup by optionalls making the huge_zero_pagepersistent, instead of releasing it when its refcount falls to zero - "kho: fixes and cleanups" from Mike Rapoport adds a few touchups to the recently added Kexec Handover feature - "mm: make mm->flags a bitmap and 64-bit on all arches" from Lorenzo Stoakes turns mm_struct.flags into a bitmap. To end the constant struggle with space shortage on 32-bit conflicting with 64-bit's needs - "mm/swapfile.c and swap.h cleanup" from Chris Li cleans up some swap code - "selftests/mm: Fix false positives and skip unsupported tests" from Donet Tom fixes a few things in our selftests code - "prctl: extend PR_SET_THP_DISABLE to only provide THPs when advised" from David Hildenbrand "allows individual processes to opt-out of THP=always into THP=madvise, without affecting other workloads on the system". It's a long story - the [1/N] changelog spells out the considerations - "Add and use memdesc_flags_t" from Matthew Wilcox gets us started on the memdesc project. Please see https://kernelnewbies.org/MatthewWilcox/Memdescs and https://blogs.oracle.com/linux/post/introducing-memdesc - "Tiny optimization for large read operations" from Chi Zhiling improves the efficiency of the pagecache read path - "Better split_huge_page_test result check" from Zi Yan improves our folio splitting selftest code - "test that rmap behaves as expected" from Wei Yang adds some rmap selftests - "remove write_cache_pages()" from Christoph Hellwig removes that function and converts its two remaining callers - "selftests/mm: uffd-stress fixes" from Dev Jain fixes some UFFD selftests issues - "introduce kernel file mapped folios" from Boris Burkov introduces the concept of "kernel file pages". Using these permits btrfs to account its metadata pages to the root cgroup, rather than to the cgroups of random inappropriate tasks - "mm/pageblock: improve readability of some pageblock handling" from Wei Yang provides some readability improvements to the page allocator code - "mm/damon: support ARM32 with LPAE" from SeongJae Park teaches DAMON to understand arm32 highmem - "tools: testing: Use existing atomic.h for vma/maple tests" from Brendan Jackman performs some code cleanups and deduplication under tools/testing/ - "maple_tree: Fix testing for 32bit compiles" from Liam Howlett fixes a couple of 32-bit issues in tools/testing/radix-tree.c - "kasan: unify kasan_enabled() and remove arch-specific implementations" from Sabyrzhan Tasbolatov moves KASAN arch-specific initialization code into a common arch-neutral implementation - "mm: remove zpool" from Johannes Weiner removes zspool - an indirection layer which now only redirects to a single thing (zsmalloc) - "mm: task_stack: Stack handling cleanups" from Pasha Tatashin makes a couple of cleanups in the fork code - "mm: remove nth_page()" from David Hildenbrand makes rather a lot of adjustments at various nth_page() callsites, eventually permitting the removal of that undesirable helper function - "introduce kasan.write_only option in hw-tags" from Yeoreum Yun creates a KASAN read-only mode for ARM, using that architecture's memory tagging feature. It is felt that a read-only mode KASAN is suitable for use in production systems rather than debug-only - "mm: hugetlb: cleanup hugetlb folio allocation" from Kefeng Wang does some tidying in the hugetlb folio allocation code - "mm: establish const-correctness for pointer parameters" from Max Kellermann makes quite a number of the MM API functions more accurate about the constness of their arguments. This was getting in the way of subsystems (in this case CEPH) when they attempt to improving their own const/non-const accuracy - "Cleanup free_pages() misuse" from Vishal Moola fixes a number of code sites which were confused over when to use free_pages() vs __free_pages() - "Add Rust abstraction for Maple Trees" from Alice Ryhl makes the mapletree code accessible to Rust. Required by nouveau and by its forthcoming successor: the new Rust Nova driver - "selftests/mm: split_huge_page_test: split_pte_mapped_thp improvements" from David Hildenbrand adds a fix and some cleanups to the thp selftesting code - "mm, swap: introduce swap table as swap cache (phase I)" from Chris Li and Kairui Song is the first step along the path to implementing "swap tables" - a new approach to swap allocation and state tracking which is expected to yield speed and space improvements. This patchset itself yields a 5-20% performance benefit in some situations - "Some ptdesc cleanups" from Matthew Wilcox utilizes the new memdesc layer to clean up the ptdesc code a little - "Fix va_high_addr_switch.sh test failure" from Chunyu Hu fixes some issues in our 5-level pagetable selftesting code - "Minor fixes for memory allocation profiling" from Suren Baghdasaryan addresses a couple of minor issues in relatively new memory allocation profiling feature - "Small cleanups" from Matthew Wilcox has a few cleanups in preparation for more memdesc work - "mm/damon: add addr_unit for DAMON_LRU_SORT and DAMON_RECLAIM" from Quanmin Yan makes some changes to DAMON in furtherance of supporting arm highmem - "selftests/mm: Add -Wunreachable-code and fix warnings" from Muhammad Anjum adds that compiler check to selftests code and fixes the fallout, by removing dead code - "Improvements to Victim Process Thawing and OOM Reaper Traversal Order" from zhongjinji makes a number of improvements in the OOM killer: mainly thawing a more appropriate group of victim threads so they can release resources - "mm/damon: misc fixups and improvements for 6.18" from SeongJae Park is a bunch of small and unrelated fixups for DAMON - "mm/damon: define and use DAMON initialization check function" from SeongJae Park implement reliability and maintainability improvements to a recently-added bug fix - "mm/damon/stat: expose auto-tuned intervals and non-idle ages" from SeongJae Park provides additional transparency to userspace clients of the DAMON_STAT information - "Expand scope of khugepaged anonymous collapse" from Dev Jain removes some constraints on khubepaged's collapsing of anon VMAs. It also increases the success rate of MADV_COLLAPSE against an anon vma - "mm: do not assume file == vma->vm_file in compat_vma_mmap_prepare()" from Lorenzo Stoakes moves us further towards removal of file_operations.mmap(). This patchset concentrates upon clearing up the treatment of stacked filesystems - "mm: Improve mlock tracking for large folios" from Kiryl Shutsemau provides some fixes and improvements to mlock's tracking of large folios. /proc/meminfo's "Mlocked" field became more accurate - "mm/ksm: Fix incorrect accounting of KSM counters during fork" from Donet Tom fixes several user-visible KSM stats inaccuracies across forks and adds selftest code to verify these counters - "mm_slot: fix the usage of mm_slot_entry" from Wei Yang addresses some potential but presently benign issues in KSM's mm_slot handling * tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (372 commits) mm: swap: check for stable address space before operating on the VMA mm: convert folio_page() back to a macro mm/khugepaged: use start_addr/addr for improved readability hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list alloc_tag: fix boot failure due to NULL pointer dereference mm: silence data-race in update_hiwater_rss mm/memory-failure: don't select MEMORY_ISOLATION mm/khugepaged: remove definition of struct khugepaged_mm_slot mm/ksm: get mm_slot by mm_slot_entry() when slot is !NULL hugetlb: increase number of reserving hugepages via cmdline selftests/mm: add fork inheritance test for ksm_merging_pages counter mm/ksm: fix incorrect KSM counter handling in mm_struct during fork drivers/base/node: fix double free in register_one_node() mm: remove PMD alignment constraint in execmem_vmalloc() mm/memory_hotplug: fix typo 'esecially' -> 'especially' mm/rmap: improve mlock tracking for large folios mm/filemap: map entire large folio faultaround mm/fault: try to map the entire file folio in finish_fault() mm/rmap: mlock large folios in try_to_unmap_one() mm/rmap: fix a mlock race condition in folio_referenced_one() ...
2025-10-02Merge tag 'net-next-6.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core & protocols: - Improve drop account scalability on NUMA hosts for RAW and UDP sockets and the backlog, almost doubling the Pps capacity under DoS - Optimize the UDP RX performance under stress, reducing contention, revisiting the binary layout of the involved data structs and implementing NUMA-aware locking. This improves UDP RX performance by an additional 50%, even more under extreme conditions - Add support for PSP encryption of TCP connections; this mechanism has some similarities with IPsec and TLS, but offers superior HW offloads capabilities - Ongoing work to support Accurate ECN for TCP. AccECN allows more than one congestion notification signal per RTT and is a building block for Low Latency, Low Loss, and Scalable Throughput (L4S) - Reorganize the TCP socket binary layout for data locality, reducing the number of touched cachelines in the fastpath - Refactor skb deferral free to better scale on large multi-NUMA hosts, this improves TCP and UDP RX performances significantly on such HW - Increase the default socket memory buffer limits from 256K to 4M to better fit modern link speeds - Improve handling of setups with a large number of nexthop, making dump operating scaling linearly and avoiding unneeded synchronize_rcu() on delete - Improve bridge handling of VLAN FDB, storing a single entry per bridge instead of one entry per port; this makes the dump order of magnitude faster on large switches - Restore IP ID correctly for encapsulated packets at GSO segmentation time, allowing GRO to merge packets in more scenarios - Improve netfilter matching performance on large sets - Improve MPTCP receive path performance by leveraging recently introduced core infrastructure (skb deferral free) and adopting recent TCP autotuning changes - Allow bridges to redirect to a backup port when the bridge port is administratively down - Introduce MPTCP 'laminar' endpoint that con be used only once per connection and simplify common MPTCP setups - Add RCU safety to dst->dev, closing a lot of possible races - A significant crypto library API for SCTP, MPTCP and IPv6 SR, reducing code duplication - Supports pulling data from an skb frag into the linear area of an XDP buffer Things we sprinkled into general kernel code: - Generate netlink documentation from YAML using an integrated YAML parser Driver API: - Support using IPv6 Flow Label in Rx hash computation and RSS queue selection - Introduce API for fetching the DMA device for a given queue, allowing TCP zerocopy RX on more H/W setups - Make XDP helpers compatible with unreadable memory, allowing more easily building DevMem-enabled drivers with a unified XDP/skbs datapath - Add a new dedicated ethtool callback enabling drivers to provide the number of RX rings directly, improving efficiency and clarity in RX ring queries and RSS configuration - Introduce a burst period for the health reporter, allowing better handling of multiple errors due to the same root cause - Support for DPLL phase offset exponential moving average, controlling the average smoothing factor Device drivers: - Add a new Huawei driver for 3rd gen NIC (hinic3) - Add a new SpacemiT driver for K1 ethernet MAC - Add a generic abstraction for shared memory communication devices (dibps) - Ethernet high-speed NICs: - nVidia/Mellanox: - Use multiple per-queue doorbell, to avoid MMIO contention issues - support adjacent functions, allowing them to delegate their SR-IOV VFs to sibling PFs - support RSS for IPSec offload - support exposing raw cycle counters in PTP and mlx5 - support for disabling host PFs. - Intel (100G, ice, idpf): - ice: support for SRIOV VFs over an Active-Active link aggregate - ice: support for firmware logging via debugfs - ice: support for Earliest TxTime First (ETF) hardware offload - idpf: support basic XDP functionalities and XSk - Broadcom (bnxt): - support Hyper-V VF ID - dynamic SRIOV resource allocations for RoCE - Meta (fbnic): - support queue API, zero-copy Rx and Tx - support basic XDP functionalities - devlink health support for FW crashes and OTP mem corruptions - expand hardware stats coverage to FEC, PHY, and Pause - Wangxun: - support ethtool coalesce options - support for multiple RSS contexts - Ethernet virtual: - Macsec: - replace custom netlink attribute checks with policy-level checks - Bonding: - support aggregator selection based on port priority - Microsoft vNIC: - use page pool fragments for RX buffers instead of full pages to improve memory efficiency - Ethernet NICs consumer, and embedded: - Qualcomm: support Ethernet function for IPQ9574 SoC - Airoha: implement wlan offloading via NPU - Freescale - enetc: add NETC timer PTP driver and add PTP support - fec: enable the Jumbo frame support for i.MX8QM - Renesas (R-Car S4): - support HW offloading for layer 2 switching - support for RZ/{T2H, N2H} SoCs - Cadence (macb): support TAPRIO traffic scheduling - TI: - support for Gigabit ICSS ethernet SoC (icssm-prueth) - Synopsys (stmmac): a lot of cleanups - Ethernet PHYs: - Support 10g-qxgmi phy-mode for AQR412C, Felix DSA and Lynx PCS driver - Support bcm63268 GPHY power control - Support for Micrel lan8842 PHY and PTP - Support for Aquantia AQR412 and AQR115 - CAN: - a large CAN-XL preparation work - reorganize raw_sock and uniqframe struct to minimize memory usage - rcar_canfd: update the CAN-FD handling - WiFi: - extended Neighbor Awareness Networking (NAN) support - S1G channel representation cleanup - improve S1G support - WiFi drivers: - Intel (iwlwifi): - major refactor and cleanup - Broadcom (brcm80211): - support for AP isolation - RealTek (rtw88/89) rtw88/89: - preparation work for RTL8922DE support - MediaTek (mt76): - HW restart improvements - MLO support - Qualcomm/Atheros (ath10k): - GTK rekey fixes - Bluetooth drivers: - btusb: support for several new IDs for MT7925 - btintel: support for BlazarIW core - btintel_pcie: support for _suspend() / _resume() - btintel_pcie: support for Scorpious, Panther Lake-H484 IDs" * tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1536 commits) net: stmmac: Add support for Allwinner A523 GMAC200 dt-bindings: net: sun8i-emac: Add A523 GMAC200 compatible Revert "Documentation: net: add flow control guide and document ethtool API" octeontx2-pf: fix bitmap leak octeontx2-vf: fix bitmap leak net/mlx5e: Use extack in set rxfh callback net/mlx5e: Introduce mlx5e_rss_params for RSS configuration net/mlx5e: Introduce mlx5e_rss_init_params net/mlx5e: Remove unused mdev param from RSS indir init net/mlx5: Improve QoS error messages with actual depth values net/mlx5e: Prevent entering switchdev mode with inconsistent netns net/mlx5: HWS, Generalize complex matchers net/mlx5: Improve write-combining test reliability for ARM64 Grace CPUs selftests/net: add tcp_port_share to .gitignore Revert "net/mlx5e: Update and set Xon/Xoff upon MTU set" net: add NUMA awareness to skb_attempt_defer_free() net: use llist for sd->defer_list net: make softnet_data.defer_count an atomic selftests: drv-net: psp: add tests for destroying devices selftests: drv-net: psp: add test for auto-adjusting TCP MSS ...
2025-10-02drm/xe/pf: Synchronize VF FLR between all GTsMichal Wajdeczko
The PF part of the VF FLR processing shall be done after all GuCs confirm that they finished their part VF FLR processing, otherwise PF may start clearing VF's GGTT that other GuC may still accessing. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Link: https://lore.kernel.org/r/20250930233525.201263-7-michal.wajdeczko@intel.com
2025-10-02drm/xe/pf: Split VF FLR processing functionMichal Wajdeczko
On multi-GT platforms (like PTL) we may want to run VF FLR on each GuC (render and media) in parallel. Split our FLR function to allow to wait for GT VF FLR completion separately. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Link: https://lore.kernel.org/r/20250930233525.201263-6-michal.wajdeczko@intel.com
2025-10-02drm/xe/pf: Unify VF state tracking logMichal Wajdeczko
By using single function that dumps VF state transition, final logs are easier to analyze as there is always the same call site in every debug message. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Link: https://lore.kernel.org/r/20250930233525.201263-5-michal.wajdeczko@intel.com
2025-10-02drm/xe/pf: Expose VF control operations over debugfsMichal Wajdeczko
To allow the user to control the activity of individual VFs, expose basic VF control operations (pause, resume, stop, reset) over the debugfs as write-only files: /sys/kernel/debug/dri/BDF/sriov/ ├── vf1 │ ├── pause │ ├── reset │ ├── resume │ ├── stop │ : ├── vf2 : : Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Link: https://lore.kernel.org/r/20250930233525.201263-4-michal.wajdeczko@intel.com
2025-10-02drm/xe/pf: Log only top level VF state changesMichal Wajdeczko
The user likely only care about top level VF state changes, any VF state logs on the per-GT basis can be demoted to the debug level. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Link: https://lore.kernel.org/r/20250930233525.201263-3-michal.wajdeczko@intel.com
2025-10-02drm/xe/pf: Add top level functions to control VFsMichal Wajdeczko
We already have control functions that we use to control the VF state on the per-GT basis, but that is low level detail from the user point of view, who rather expects VF-level functions. For now add simple functions that just iterate over all GTs and call per-GT control function. We will soon allow to use some of them from the user facing interfaces like debugfs. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Link: https://lore.kernel.org/r/20250930233525.201263-2-michal.wajdeczko@intel.com
2025-10-02drm/i915/display: Enable PICA power before AUXGustavo Sousa
According to Bspec, before enabling AUX power, we need to have the "power well containing Aux logic powered up". Starting with Xe2_LPD, such power well is the "PICA" power well, which is managed by the driver on demand. While we did add the mapping of AUX power domains to the PICA power well, we ended up placing its power well descriptor after the descriptor for AUX power. As a result, when enabling power wells for one of the aux power domains, the driver will enable AUX power before PICA power, going against the order specified in Bspec. It appears that issue did not become apparent to us mainly because, luckily, AUX power is brought up after we assert PICA power, even if done in the wrong order; and in enough time for the first AUX transaction to succeed. Furthermore, I have also realized that, in some cases, like driver initialization, PICA power is already up when we need to acquire AUX power. One case where we can observe the incorrect ordering is when the driver is resuming from runtime PM suspend. Here is an excerpt of a dmesg with some extra debug logs extracted from a LNL machine to illustrate the issue: [ +0.000156] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC1 [ +0.001312] xe 0000:00:02.0: [drm:xelpdp_aux_power_well_enable [xe]] DBG: AUX_CH_USBC1 power status: 0 [ +0.000127] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC [ +0.001072] xe 0000:00:02.0: [drm:xe2lpd_pica_power_well_enable [xe]] DBG: AUX_CH_USBC1 power status: 1 [ +0.000102] xe 0000:00:02.0: [drm:xe2lpd_pica_power_well_enable [xe]] DBG: AUX_CH_USBC2 power status: 0 [ +0.000090] xe 0000:00:02.0: [drm:xe2lpd_pica_power_well_enable [xe]] DBG: AUX_CH_USBC3 power status: 0 [ +0.000092] xe 0000:00:02.0: [drm:xe2lpd_pica_power_well_enable [xe]] DBG: AUX_CH_USBC4 power status: 0 The first "DBG: ..." line shows that AUX power for TC1 is off after we assert and wait. The remaining lines show that AUX power for TC1 was on after we enabled PICA power and waited for AUX power. It is important that we stay compliant with the spec, so let's fix this by listing the power wells in an order that matches the requirements from Bspec. (As a side note, it would be nice if we could define those dependencies explicitly.) After this change, we have: [ +0.000146] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC [ +0.001417] xe 0000:00:02.0: [drm:xe2lpd_pica_power_well_enable [xe]] DBG: AUX_CH_USBC1 power status: 0 [ +0.000116] xe 0000:00:02.0: [drm:xe2lpd_pica_power_well_enable [xe]] DBG: AUX_CH_USBC2 power status: 0 [ +0.000096] xe 0000:00:02.0: [drm:xe2lpd_pica_power_well_enable [xe]] DBG: AUX_CH_USBC3 power status: 0 [ +0.000094] xe 0000:00:02.0: [drm:xe2lpd_pica_power_well_enable [xe]] DBG: AUX_CH_USBC4 power status: 0 [ +0.000095] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC1 [ +0.000915] xe 0000:00:02.0: [drm:xelpdp_aux_power_well_enable [xe]] DBG: AUX_CH_USBC1 power status: 1 Bspec: 68967, 68886, 72519 Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://lore.kernel.org/r/20251001-pica-power-before-aux-v2-2-6308df4de5a8@intel.com Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
2025-10-02drm/i915/display: Extract separate AUX PW descriptorsGustavo Sousa
In an upcoming change, we will fix an ordering issue between PICA and AUX power wells for Xe2_LPD and later, making sure that the driver acquires PICA power before AUX. As a preparation for that, let's extract separate descriptors for AUX power wells. Suggested-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://lore.kernel.org/r/20251001-pica-power-before-aux-v2-1-6308df4de5a8@intel.com Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
2025-10-02loop: fix backing file reference leak on validation errorLi Chen
loop_change_fd() and loop_configure() call loop_check_backing_file() to validate the new backing file. If validation fails, the reference acquired by fget() was not dropped, leaking a file reference. Fix this by calling fput(file) before returning the error. Cc: stable@vger.kernel.org Cc: Markus Elfring <Markus.Elfring@web.de> CC: Yang Erkun <yangerkun@huawei.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Yu Kuai <yukuai1@huaweicloud.com> Fixes: f5c84eff634b ("loop: Add sanity check for read/write_iter") Signed-off-by: Li Chen <chenl311@chinatelecom.cn> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Yang Erkun <yangerkun@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-10-02gpu/drm: panel-edp: add AUO B116XAN02.0 panel entrySvyatoslav Ryhel
Add an eDP panel entry for AUO B116XAN02.0 used in Lenovo IdeaPad Yoga 11 with Tegra 3 SoC. The raw edid of the panel is: 00 ff ff ff ff ff ff 00 06 af 5c 20 00 00 00 00 00 16 01 04 90 1a 0e 78 02 99 85 95 55 56 92 28 22 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 12 1b 56 5a 50 00 19 30 30 20 46 00 00 90 10 00 00 18 00 00 00 0f 00 00 00 00 00 00 00 00 00 00 00 00 00 20 00 00 00 fe 00 41 55 4f 0a 20 20 20 20 20 20 20 20 20 00 00 00 fe 00 42 31 31 36 58 41 4e 30 32 2e 30 20 0a 00 f1 Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20250929142455.24883-9-clamor95@gmail.com
2025-10-02fbdev/hyperv_fb: deprecate this in favor of Hyper-V DRM driverPrasanna Kumar T S M
The Hyper-V DRM driver is available since kernel version 5.14 and it provides full KMS support and fbdev emulation via the DRM fbdev helpers. Deprecate this driver in favor of Hyper-V DRM driver. Signed-off-by: Prasanna Kumar T S M <ptsm@linux.microsoft.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2025-10-02Merge tag 'media/v6.18-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Added a new V4L2 clock helper - New camera sensor drivers - iris: Enable H.264/H.265 encoder support and fixes in iris driver common code - camss: add support for new SoC flavors - venus: add new SoC support - tc358743: support more infoframe types - Various fixes, driver improvements and cleanups * tag 'media/v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (439 commits) media: venus: pm_helpers: add fallback for the opp-table media: qcom: camss: vfe: Fix BPL alignment for QCM2290 media: tuner: xc5000: Fix use-after-free in xc5000_release media: i2c: tc358743: Fix use-after-free bugs caused by orphan timer in probe media: b2c2: Fix use-after-free causing by irq_check_work in flexcop_pci_remove media: vsp1: Export missing vsp1_isp_free_buffer symbol media: renesas: vsp1: Convert to SYSTEM_SLEEP/RUNTIME_PM_OPS() media: renesas: ceu: Convert to RUNTIME_PM_OPS() media: renesas: fdp1: Convert to RUNTIME_PM_OPS() media: renesas: rcar-vin: Convert to DEFINE_SIMPLE_DEV_PM_OPS() media: renesas: rcar_drif: Convert to DEFINE_SIMPLE_DEV_PM_OPS() media: uvcvideo: Mark invalid entities with id UVC_INVALID_ENTITY_ID media: uvcvideo: Support UVC_CROSXU_CONTROL_IQ_PROFILE media: uvcvideo: Run uvc_ctrl_init_ctrl for all controls media: uvcvideo: Shorten the transfer size non compliance message media: uvcvideo: Do not re-reference dev->udev media: uvcvideo: Use intf instead of udev for printks media: uvcvideo: Move video_device under video_queue media: uvcvideo: Drop stream->mutex media: uvcvideo: Move MSXU_CONTROL_METADATA definition to header ...
2025-10-02fbdev: Make drivers depend on LCD_CLASS_DEVICEThomas Zimmermann
LCD_CLASS_DEVICE is the user-controlled option that enables the LCD display subsystem. Do not select it from fbdev drivers. Selecting it from drivers can lead to cyclic dependencies within the config. Some guidelines for using select can be found in the kernel docs at [1]. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://elixir.bootlin.com/linux/v6.16/source/Documentation/kbuild/kconfig-language.rst#L147 # [1] Signed-off-by: Helge Deller <deller@gmx.de>
2025-10-02fbdev: radeonfb: Remove stale product link in KconfigSukrut Heroorkar
The product page referenced in the FB_RADEON is no longer valid. Remove it to avoid pointing to an invalid link. Signed-off-by: Sukrut Heroorkar <hsukrut3@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Helge Deller <deller@gmx.de>
generated by cgit v1.2.3 (git 2.25.1) at 2026-09-15 23:13:33 +0000