| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"Beside the usual bunch of smaller bug fixes, the majority of changes
were by Zsolt Kajtar to improve the s3fb driver.
Bug fixes:
- Bounds checking to fix vmalloc-out-of-bounds (Albin Babu Varghese)
- Fix logic error in "offb" name match (Finn Thain)
- simplefb: Fix use after free in (Janne Grunau)
- s3fb: Various fixes and powersave improvements (Zsolt Kajtar)
Enhancements & code cleanups:
- Various fixes in the documentation (Bagas Sanjaya)
- Use string choices helpers (Chelsy Ratnawat)
- xenfb: Use vmalloc_array to simplify code (Qianfeng Rong)
- mb862xxfb: use signed type for error codes (Qianfeng Rong)
- Make drivers depend on LCD_CLASS_DEVICE (Thomas Zimmermann)
- radeonfb: Remove stale product link in Kconfig (Sukrut Heroorkar)"
* tag 'fbdev-for-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: Fix logic error in "offb" name match
fbdev: Add bounds checking in bit_putcs to fix vmalloc-out-of-bounds
fbdev: Make drivers depend on LCD_CLASS_DEVICE
fbdev: radeonfb: Remove stale product link in Kconfig
Documentation: fb: Retitle driver docs
Documentation: fb: ep93xx: Demote section headings
Documentation: fb: Split toctree
fbdev: simplefb: Fix use after free in simplefb_detach_genpds()
fbdev: s3fb: Revert mclk stop in suspend
fbdev: mb862xxfb: Use int type to store negative error codes
fbdev: Use string choices helpers
fbdev: core: Fix ubsan warning in pixel_to_pat
fbdev: s3fb: Implement 1 and 2 BPP modes, improve 4 BPP
fbdev: s3fb: Implement powersave for S3 FB
fbdev: xenfb: Use vmalloc_array to simplify code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- add a missing ACPI ID for MTL-CVF devices in gpio-usbio
- mark the gpio-wcd934x controller as "sleeping" as it uses a mutex for
locking internally
* tag 'gpio-fixes-for-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: wcd934x: mark the GPIO controller as sleeping
gpio: usbio: Add ACPI device-id for MTL-CVF devices
|
|
Pull NTB updates from Jon Mason:
- Add support for Renesas R-Car and allow arbitrary BAR mapping in EPF
- Update ntb_hw_amd to support the latest generation secondary topology
and add a new maintainer
- Fix a bug by adding a mutex to ensure `link_event_callback` executes
sequentially
* tag 'ntb-6.18' of https://github.com/jonmason/ntb:
NTB: epf: Add Renesas rcar support
NTB: epf: Allow arbitrary BAR mapping
ntb: Add mutex to make link_event_callback executed linearly.
MAINTAINERS: Update for the NTB AMD driver maintainer
ntb_hw_amd: Update amd_ntb_get_link_status to support latest generation secondary topology
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang:
- Second part of rtl9300 updates since dependencies are in now:
- general cleanups
- implement block read/write support
- add RTL9310 support
- DT schema conversion of hix5hd2 binding
- namespace cleanup for i2c-algo-pca
- minor simplification for mt65xx
* tag 'i2c-for-6.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
dt-bindings: i2c: hisilicon,hix5hd2: convert to DT schema
i2c: mt65xx: convert set_speed function to void
i2c: rename wait_for_completion callback to wait_for_completion_cb
i2c: rtl9300: add support for RTL9310 I2C controller
dt-bindings: i2c: realtek,rtl9301-i2c: extend for RTL9310 support
i2c: rtl9300: use scoped guard instead of explicit lock/unlock
i2c: rtl9300: separate xfer configuration and execution
i2c: rtl9300: do not set read mode on every transfer
i2c: rtl9300: move setting SCL frequency to config_io
i2c: rtl9300: rename internal sda_pin to sda_num
dt-bindings: i2c: realtek,rtl9301-i2c: fix wording and typos
i2c: rtl9300: use regmap fields and API for registers
i2c: rtl9300: Implement I2C block read and write
|
|
Moving to VRAM will fail if mixed mappings are present or if the page is
already located in VRAM. Atomic faults that require a move to VRAM
currently retry without attempting to evict mixed mappings or locate
existing VRAM mappings.
This patch fixes the issue by attempting to evict mixed mappings or find
existing VRAM pages when a move to VRAM fails during atomic fault
handling.
Fixes: a9ac0fa455b0 ("drm/xe: Strict migration policy for atomic SVM faults")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://lore.kernel.org/r/20251009130629.3531962-1-matthew.brost@intel.com
|
|
Remove the hal_ prefix from hardware register names in ath12k_hw_regs
as the registers have been moved from ab->regs to hal->regs.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Ripan Deuri <quic_rdeuri@quicinc.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251009111045.1763001-19-quic_rdeuri@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Rename the hal_ops member in the HAL context to ops. The prefix is
dropped to avoid redundancy, as the structure already resides within
the HAL context.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Ripan Deuri <quic_rdeuri@quicinc.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251009111045.1763001-18-quic_rdeuri@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Remove the initialization for the following rings in wcn as these rings
are not used for wcn chips.
HAL_RXDMA_MONITOR_BUF
HAL_PPE2TCL
HAL_PPE_RELEASE
HAL_TX_MONITOR_BUF
HAL_RXDMA_MONITOR_DST
HAL_TX_MONITOR_DST
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Pavankumar Nandeshwar <quic_pnandesh@quicinc.com>
Signed-off-by: Ripan Deuri <quic_rdeuri@quicinc.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251009111045.1763001-17-quic_rdeuri@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Segregate the common and wifi7 specific structures in hal,
and move them to corresponding header files.
hal.h file in common directory is used by both common
and wifi7 directory files, while hal.h and other hal headers
are used only by files within the wifi7 directory since
these headers contain hw specific hal data.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Pavankumar Nandeshwar <quic_pnandesh@quicinc.com>
Signed-off-by: Ripan Deuri <quic_rdeuri@quicinc.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251009111045.1763001-16-quic_rdeuri@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Move the hardware specific HAL APIs to hal.c file
inside wifi7 directory. These APIs will be called
through the hal_ops mechanism, which are registered
separately by qcn and wcn
Handling following APIs:
ath12k_wifi7_hal_cc_config
ath12k_wifi7_hal_get_idle_link_rbm
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Pavankumar Nandeshwar <quic_pnandesh@quicinc.com>
Signed-off-by: Ripan Deuri <quic_rdeuri@quicinc.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251009111045.1763001-15-quic_rdeuri@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Move the hardware specific HAL APIs to hal.c file
inside wifi7 directory. These APIs will be called
through the hal_ops mechanism, which are registered
separately by qcn and wcn
Handling following APIs:
ath12k_wifi7_hal_reo_qdesc_setup
ath12k_wifi7_hal_reo_init_cmd_ring
ath12k_wifi7_hal_reo_hw_setup
ath12k_wifi7_hal_rx_buf_addr_info_set
ath12k_wifi7_hal_rx_buf_addr_info_get
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Pavankumar Nandeshwar <quic_pnandesh@quicinc.com>
Signed-off-by: Ripan Deuri <quic_rdeuri@quicinc.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251009111045.1763001-14-quic_rdeuri@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
directory
Move the hardware specific HAL APIs to hal.c file
inside wifi7 directory. These APIs will be called
through the hal_ops mechanism, which are registered
separately by qcn and wcn
Handling following APIs:
ath12k_wifi7_hal_tx_set_dscp_tid_map
ath12k_wifi7_hal_tx_configure_bank_register
ath12k_hal_reoq_lut_addr_read_enable
ath12k_hal_reoq_lut_set_max_peerid
ath12k_wifi7_hal_write_reoq_lut_addr
ath12k_wifi7_hal_write_ml_reoq_lut_addr
ath12k_wifi7_hal_setup_link_idle_list
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Pavankumar Nandeshwar <quic_pnandesh@quicinc.com>
Signed-off-by: Ripan Deuri <quic_rdeuri@quicinc.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251009111045.1763001-13-quic_rdeuri@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Move the hardware specific HAL APIs to hal.c file
inside wifi7 directory. These APIs will be called
through the hal_ops mechanism, which are registered
separately by qcn and wcn
Handling following APIs:
ath12k_wifi7_hal_ce_dst_status_get_length
ath12k_wifi7_hal_set_link_desc_addr
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Pavankumar Nandeshwar <quic_pnandesh@quicinc.com>
Signed-off-by: Ripan Deuri <quic_rdeuri@quicinc.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251009111045.1763001-12-quic_rdeuri@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Move the hardware specific HAL APIs to hal.c file
inside wifi7 directory. These APIs will be called
through the hal_ops mechanism, which are registered
separately by qcn and wcn
Handling following APIs:
ath12k_wifi7_hal_ce_get_desc_size
ath12k_wifi7_hal_ce_src_set_desc
ath12k_wifi7_hal_ce_dst_set_desc
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Pavankumar Nandeshwar <quic_pnandesh@quicinc.com>
Signed-off-by: Ripan Deuri <quic_rdeuri@quicinc.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251009111045.1763001-11-quic_rdeuri@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
directory
Move the hardware specific HAL APIs to hal.c file
inside wifi7 directory. These APIs will be called
through the hal_ops mechanism, which are registered
separately by qcn and wcn
Handling following APIs:
ath12k_wifi7_hal_srng_update_shadow_config
ath12k_wifi7_hal_srng_get_ring_id
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Pavankumar Nandeshwar <quic_pnandesh@quicinc.com>
Signed-off-by: Ripan Deuri <quic_rdeuri@quicinc.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251009111045.1763001-10-quic_rdeuri@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Move the hardware specific HAL APIs to hal.c file
inside wifi7 directory. These APIs will be called
through the hal_ops mechanism, which are registered
separately by qcn and wcn
Handling following APIs:
ath12k_wifi7_hal_ce_dst_setup
ath12k_wifi7_hal_srng_src_hw_init
ath12k_wifi7_hal_srng_dst_hw_init
ath12k_wifi7_hal_set_umac_srng_ptr_addr
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Pavankumar Nandeshwar <quic_pnandesh@quicinc.com>
Signed-off-by: Ripan Deuri <quic_rdeuri@quicinc.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251009111045.1763001-9-quic_rdeuri@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Use hal handle instead of ab handle in hal config APIs
and register access APIs, as this reduces the indirection.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Pavankumar Nandeshwar <quic_pnandesh@quicinc.com>
Signed-off-by: Ripan Deuri <quic_rdeuri@quicinc.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251009111045.1763001-8-quic_rdeuri@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Add a direct pointer to the HAL context in ath12k_dp. Since ath12k_dp
is frequenctly used in the per-packet data path, this avoids the need
to access the HAL handle through the ab pointer, reducing indirection
in the per-packet data path.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Pavankumar Nandeshwar <quic_pnandesh@quicinc.com>
Signed-off-by: Ripan Deuri <quic_rdeuri@quicinc.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251009111045.1763001-7-quic_rdeuri@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Move hal_params and regs to hal structure from
the hw structure, since these parameters are used by hal layer
and make corresponding initializations in hal_init.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Pavankumar Nandeshwar <quic_pnandesh@quicinc.com>
Signed-off-by: Ripan Deuri <quic_rdeuri@quicinc.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251009111045.1763001-6-quic_rdeuri@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Move wbm_rbm_map from common hal file to
hw specific hal files, since these implementations are
specific and configurable for each hardware.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Pavankumar Nandeshwar <quic_pnandesh@quicinc.com>
Signed-off-by: Ripan Deuri <quic_rdeuri@quicinc.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251009111045.1763001-5-quic_rdeuri@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Modularize the HAL layer by moving hal_ops from ab->hw_params into the
ab->hal. This reduces indirection and allows data path to access HAL ops
directly through the HAL context.
Initialize hal_ops via hal_init using a const table ath12k_hw_version_map.
This approach will be extended to register other HAL parameters during
init.
Remove ab->hw_params->hal_ops as it is no longer needed.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Pavankumar Nandeshwar <quic_pnandesh@quicinc.com>
Signed-off-by: Ripan Deuri <quic_rdeuri@quicinc.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251009111045.1763001-4-quic_rdeuri@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently desc_size uses a dedicated hal_ops API for initialization.
Combine it with other hal_params to be initialized in a
single API "hal_init" during probe time using a static array.
hal_init will be used as the common API to initialize
all hal parameters during the probe.
Add hal.c file to add hal definitions that are wifi7 specific
but common between qca and wcn chipsets.
Add hal.h header to add wifi7 specific prototypes/Macros etc
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Pavankumar Nandeshwar <quic_pnandesh@quicinc.com>
Signed-off-by: Ripan Deuri <quic_rdeuri@quicinc.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251009111045.1763001-3-quic_rdeuri@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Move srng config and hal_ops from common hal file to
hw specific hal files, since these implementations are
specific and configurable for each hardware
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Pavankumar Nandeshwar <quic_pnandesh@quicinc.com>
Signed-off-by: Ripan Deuri <quic_rdeuri@quicinc.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251009111045.1763001-2-quic_rdeuri@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
The exhaustive eviction accidently changed an error path goto to
a return. Fix this.
Fixes: 59eabff2a352 ("drm/xe: Convert xe_bo_create_pin_map() for exhaustive eviction")
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://lore.kernel.org/r/20250910160939.103473-1-thomas.hellstrom@linux.intel.com
|
|
The slimbus regmap passed to the GPIO driver down from MFD does not use
fast_io. This means a mutex is used for locking and thus this GPIO chip
must not be used in atomic context. Change the can_sleep switch in
struct gpio_chip to true.
Fixes: 59c324683400 ("gpio: wcd934x: Add support to wcd934x gpio controller")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Replace kmalloc with kmalloc array in drm/gud/gud_pipe.c since the
calculation inside kmalloc is dynamic 'width * height'
Signed-off-by: Mehdi Ben Hadj Khelifa <mehdi.benhadjkhelifa@gmail.com>
Acked-by: Ruben Wauters <rubenru09@aol.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20251007083320.29018-1-mehdi.benhadjkhelifa@gmail.com
|
|
Newer firmware bundles contain a flash utility whose size exceeds
the currently allowed limit. Increase the maximum allowed size
to accommodate the newer utility version.
Without this patch:
# devlink dev flash i2c/1-0070 file fw_nosplit_v3.hex
Failed to load firmware
Flashing failed
Error: zl3073x: FW load failed: [utility] component is too big (11000 bytes)
Fixes: ca017409da694 ("dpll: zl3073x: Add firmware loading functionality")
Suggested-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20251008141418.841053-1-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Reads on tpm/tpm0/ppi/*operations can become very long on
misconfigured systems. Reading the TPM is a blocking operation,
thus a user could effectively trigger a DOS.
Resolve this by caching the results and avoiding the blocking
operations after the first read.
[ jarkko: fixed atomic sleep:
sed -i 's/spin_/mutex_/g' drivers/char/tpm/tpm_ppi.c
sed -i 's/DEFINE_SPINLOCK/DEFINE_MUTEX/g' drivers/char/tpm/tpm_ppi.c ]
Signed-off-by: Denis Aleksandrov <daleksan@redhat.com>
Reported-by: Jan Stancek <jstancek@redhat.com>
Closes: https://lore.kernel.org/linux-integrity/20250915210829.6661-1-daleksan@redhat.com/T/#u
Suggested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The current shenanigans for duration calculation introduce too much
complexity for a trivial problem, and further the code is hard to patch and
maintain.
Address these issues with a flat look-up table, which is easy to understand
and patch. If leaf driver specific patching is required in future, it is
easy enough to make a copy of this table during driver initialization and
add the chip parameter back.
'chip->duration' is retained for TPM 1.x.
As the first entry for this new behavior address TCG spec update mentioned
in this issue:
https://github.com/raspberrypi/linux/issues/7054
Therefore, for TPM_SelfTest the duration is set to 3000 ms.
This does not categorize a as bug, given that this is introduced to the
spec after the feature was originally made.
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The tpm_tis_write8() call specifies arguments in wrong order. Should be
(data, addr, value) not (data, value, addr). The initial correct order
was changed during the major refactoring when the code was split.
Fixes: 41a5e1cf1fe1 ("tpm/tpm_tis: Split tpm_tis driver into a core and TCG TIS compliant phy")
Signed-off-by: Gunnar Kudrjavets <gunnarku@amazon.com>
Reviewed-by: Justinien Bouron <jbouron@amazon.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Now that there are easy-to-use HMAC-SHA256 library functions, use these
in tpm2-sessions.c instead of open-coding the HMAC algorithm.
Note that the new implementation correctly handles keys longer than 64
bytes (SHA256_BLOCK_SIZE), whereas the old implementation handled such
keys incorrectly. But it doesn't appear that such keys were being used.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
In tpm_buf_check_hmac_response(), compare the HMAC values in constant
time using crypto_memneq() instead of in variable time using memcmp().
This is worthwhile to follow best practices and to be consistent with
MAC comparisons elsewhere in the kernel. However, in this driver the
side channel seems to have been benign: the HMAC input data is
guaranteed to always be unique, which makes the usual MAC forgery via
timing side channel not possible. Specifically, the HMAC input data in
tpm_buf_check_hmac_response() includes the "our_nonce" field, which was
generated by the kernel earlier, remains under the control of the
kernel, and is unique for each call to tpm_buf_check_hmac_response().
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
After reading all the feedback, right now disabling the TPM2_TCG_HMAC
is the right call.
Other views discussed:
A. Having a kernel command-line parameter or refining the feature
otherwise. This goes to the area of improvements. E.g., one
example is my own idea where the null key specific code would be
replaced with a persistent handle parameter (which can be
*unambigously* defined as part of attestation process when
done correctly).
B. Removing the code. I don't buy this because that is same as saying
that HMAC encryption cannot work at all (if really nitpicking) in
any form. Also I disagree on the view that the feature could not
be refined to something more reasoable.
Also, both A and B are worst options in terms of backporting.
Thuss, this is the best possible choice.
Cc: stable@vger.kernel.or # v6.10+
Fixes: d2add27cf2b8 ("tpm: Add NULL primary creation")
Suggested-by: Chris Fenner <cfenn@google.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
There may be cases in which the BAR0 also needs to move to accommodate
the bigger BAR2. However if it's not released, the BAR2 resize fails.
During the vram probe it can't be released as it's already in use by
xe_mmio for early register access.
Add a new function in xe_vram and let xe_pci call it directly before
even early device probe. This allows the BAR2 to resize in cases BAR0
also needs to move, assuming there aren't other reasons to hold that
move:
[] xe 0000:03:00.0: vgaarb: deactivate vga console
[] xe 0000:03:00.0: [drm] Attempting to resize bar from 8192MiB -> 16384MiB
[] xe 0000:03:00.0: BAR 0 [mem 0x83000000-0x83ffffff 64bit]: releasing
[] xe 0000:03:00.0: BAR 2 [mem 0x4000000000-0x41ffffffff 64bit pref]: releasing
[] pcieport 0000:02:01.0: bridge window [mem 0x4000000000-0x41ffffffff 64bit pref]: releasing
[] pcieport 0000:01:00.0: bridge window [mem 0x4000000000-0x41ffffffff 64bit pref]: releasing
[] pcieport 0000:01:00.0: bridge window [mem 0x4000000000-0x43ffffffff 64bit pref]: assigned
[] pcieport 0000:02:01.0: bridge window [mem 0x4000000000-0x43ffffffff 64bit pref]: assigned
[] xe 0000:03:00.0: BAR 2 [mem 0x4000000000-0x43ffffffff 64bit pref]: assigned
[] xe 0000:03:00.0: BAR 0 [mem 0x83000000-0x83ffffff 64bit]: assigned
[] pcieport 0000:00:01.0: PCI bridge to [bus 01-04]
[] pcieport 0000:00:01.0: bridge window [mem 0x83000000-0x840fffff]
[] pcieport 0000:00:01.0: bridge window [mem 0x4000000000-0x44007fffff 64bit pref]
[] pcieport 0000:01:00.0: PCI bridge to [bus 02-04]
[] pcieport 0000:01:00.0: bridge window [mem 0x83000000-0x840fffff]
[] pcieport 0000:01:00.0: bridge window [mem 0x4000000000-0x43ffffffff 64bit pref]
[] pcieport 0000:02:01.0: PCI bridge to [bus 03]
[] pcieport 0000:02:01.0: bridge window [mem 0x83000000-0x83ffffff]
[] pcieport 0000:02:01.0: bridge window [mem 0x4000000000-0x43ffffffff 64bit pref]
[] xe 0000:03:00.0: [drm] BAR2 resized to 16384M
[] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE e221:0000 dgfx:1 gfx:Xe2_HPG (20.02) ...
For BMG there are additional fix needed in the PCI side, but this
helps getting it to a working resize.
All the rebar logic is more pci-specific than xe-specific and can be
done very early in the probe sequence. In future it would be good to
move it out of xe_vram.c, but this refactor is left for later.
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: stable@vger.kernel.org # 6.12+
Link: https://lore.kernel.org/intel-xe/fafda2a3-fc63-ce97-d22b-803f771a4d19@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250918-xe-pci-rebar-2-v1-2-6c094702a074@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
A regression was reported to me recently whereby /dev/fb0 had disappeared
from a PowerBook G3 Series "Wallstreet". The problem shows up when the
"video=ofonly" parameter is passed to the kernel, which is what the
bootloader does when "no video driver" is selected. The cause of the
problem is the "offb" string comparison, which got mangled when it got
refactored. Fix it.
Cc: stable@vger.kernel.org
Fixes: 93604a5ade3a ("fbdev: Handle video= parameter in video/cmdline.c")
Reported-and-tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
When setting a normal alarm, user-space is responsible for using
RTC_AIE_ON/RTC_AIE_OFF to control if alarm irq should be enabled.
But when RTC_UIE_ON is used, interrupts must be enabled so that the
requested irq events are generated.
When RTC_UIE_OFF is used, alarm irq is disabled if there are no other
alarms queued, so this commit brings symmetry to that.
Signed-off-by: Esben Haabendal <esben@geanix.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250516-rtc-uie-irq-fixes-v2-5-3de8e530a39e@geanix.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Interrupts are automatically enabled when requested, so we need to
initialize irq_en accordingly to avoid causing an unbalanced enable
warning.
Signed-off-by: Esben Haabendal <esben@geanix.com>
Link: https://lore.kernel.org/r/20250516-rtc-uie-irq-fixes-v2-4-3de8e530a39e@geanix.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Interrupts are automatically enabled when requested, so we need to
initialize alarm_enabled accordingly to avoid causing an unbalanced enable
warning.
Signed-off-by: Esben Haabendal <esben@geanix.com>
Link: https://lore.kernel.org/r/20250516-rtc-uie-irq-fixes-v2-3-3de8e530a39e@geanix.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Interrupts are automatically enabled when requested, so we need to
initialize irq_enabled accordingly to avoid causing an unbalanced enable
warning.
Fixes: c62d658e5253 ("rtc: isl12022: Add alarm support")
Signed-off-by: Esben Haabendal <esben@geanix.com>
Link: https://lore.kernel.org/r/20250516-rtc-uie-irq-fixes-v2-2-3de8e530a39e@geanix.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
As described in the old comment dating back to
commit 6610e0893b8b ("RTC: Rework RTC code to use timerqueue for events")
from 2010, we have been living with a race window when setting alarm
with an expiry in the near future (i.e. next second).
With 1 second resolution, it can happen that the second ticks after the
check for the timer having expired, but before the alarm is actually set.
When this happen, no alarm IRQ is generated, at least not with some RTC
chips (isl12022 is an example of this).
With UIE RTC timer being implemented on top of alarm irq, being re-armed
every second, UIE will occasionally fail to work, as an alarm irq lost
due to this race will stop the re-arming loop.
For now, I have limited the additional expiry check to only be done for
alarms set to next seconds. I expect it should be good enough, although I
don't know if we can now for sure that systems with loads could end up
causing the same problems for alarms set 2 seconds or even longer in the
future.
I haven't been able to reproduce the problem with this check in place.
Cc: stable@vger.kernel.org
Signed-off-by: Esben Haabendal <esben@geanix.com>
Link: https://lore.kernel.org/r/20250516-rtc-uie-irq-fixes-v2-1-3de8e530a39e@geanix.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.18-2025-10-09:
amdgpu:
- DC DCE6 fixes
- GPU reset fixes
- Secure diplay messaging cleanup
- MES fix
- GPUVM locking fixes
- PMFW messaging cleanup
- PCI US/DS switch handling fix
- VCN queue reset fix
- DC FPU handling fix
- DCN 3.5 fix
- DC mirroring fix
amdkfd:
- Fix kfd process ref leak
- mmap write lock handling fix
- Fix comments in IOCTL
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20251009162915.981503-1-alexander.deucher@amd.com
|
|
An array of VM binds can potentially evict other buffer objects (BOs)
within the same VM under certain conditions, which may lead to NULL
pointer dereferences later in the bind pipeline. To prevent this, clear
the allow_res_evict flag in the xe_bo_validate call.
v2:
- Invert polarity of no_res_evict (Thomas)
- Add comment in code explaining issue (Thomas)
Cc: stable@vger.kernel.org
Reported-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6268
Fixes: 774b5fa509a9 ("drm/xe: Avoid evicting object of the same vm in none fault mode")
Fixes: 77f2ef3f16f5 ("drm/xe: Lock all gpuva ops during VM bind IOCTL")
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/20251009110618.3481870-1-matthew.brost@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
Current release - regressions:
- mlx5: fix pre-2.40 binutils assembler error
Current release - new code bugs:
- net: psp: don't assume reply skbs will have a socket
- eth: fbnic: fix missing programming of the default descriptor
Previous releases - regressions:
- page_pool: fix PP_MAGIC_MASK to avoid crashing on some 32-bit arches
- tcp:
- take care of zero tp->window_clamp in tcp_set_rcvlowat()
- don't call reqsk_fastopen_remove() in tcp_conn_request()
- eth:
- ice: release xa entry on adapter allocation failure
- usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlock
Previous releases - always broken:
- netfilter: validate objref and objrefmap expressions
- sctp: fix a null dereference in sctp_disposition sctp_sf_do_5_1D_ce()
- eth:
- mlx4: prevent potential use after free in mlx4_en_do_uc_filter()
- mlx5: prevent tunnel mode conflicts between FDB and NIC IPsec tables
- ocelot: fix use-after-free caused by cyclic delayed work
Misc:
- add support for MediaTek PCIe 5G HP DRMR-H01"
* tag 'net-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits)
net: airoha: Fix loopback mode configuration for GDM2 port
selftests: drv-net: pp_alloc_fail: add necessary optoins to config
selftests: drv-net: pp_alloc_fail: lower traffic expectations
selftests: drv-net: fix linter warnings in pp_alloc_fail
eth: fbnic: fix reporting of alloc_failed qstats
selftests: drv-net: xdp: add test for interface level qstats
selftests: drv-net: xdp: rename netnl to ethnl
eth: fbnic: fix saving stats from XDP_TX rings on close
eth: fbnic: fix accounting of XDP packets
eth: fbnic: fix missing programming of the default descriptor
selftests: netfilter: query conntrack state to check for port clash resolution
selftests: netfilter: nft_fib.sh: fix spurious test failures
bridge: br_vlan_fill_forward_path_pvid: use br_vlan_group_rcu()
netfilter: nft_objref: validate objref and objrefmap expressions
net: pse-pd: tps23881: Fix current measurement scaling
net/mlx5: fix pre-2.40 binutils assembler error
net/mlx5e: Do not fail PSP init on missing caps
net/mlx5e: Prevent tunnel reformat when tunnel mode not allowed
net/mlx5: Prevent tunnel mode conflicts between FDB and NIC IPsec tables
net: usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlock
...
|
|
There is no point in checking the bo fence tiling mode when
we can just check the fb modifier instead.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251003145734.7634-6-ville.syrjala@linux.intel.com
|
|
intel_fb_bo_framebuffer_init() doesn't do anything with the passed
framebuffer. Don't pass it therefore.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251003145734.7634-5-ville.syrjala@linux.intel.com
|
|
Currently we use the implicit modifier fb creation path for fbdev,
but as we never call set_tiling on the bo it will always end up as
linear anyway. The rest of the code (eg. stride alignment) also
assumes that we'll use linear. Just select the linear modifier
explicitly.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251003145734.7634-4-ville.syrjala@linux.intel.com
|
|
intel_frontbuffer_get() is what locks out subsequent set_tiling
changes to the bo. Thus the fence vs. modifier check must be done
after intel_frontbuffer_get(), or else a concurrent set_tiling ioctl
might sneak in and change the fence after the check has been done.
Close the race again. See commit dd689287b977 ("drm/i915: Prevent
concurrent tiling/framebuffer modifications") for the previous
instance.
v2: Reorder intel_user_framebuffer_destroy() to match the unwind (Jani)
Cc: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Fixes: 10690b8a49bc ("drm/i915/display: Add intel_fb_bo_framebuffer_fini")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251003145734.7634-3-ville.syrjala@linux.intel.com
|
|
Currently xe's intel_frontbuffer implementation forgets to
hold a reference on the bo. This makes the entire thing
extremely fragile as the cleanup order now depends on bo
references held by other things
(namely intel_fb_bo_framebuffer_fini()).
Move the bo refcounting to intel_frontbuffer_{get,release}()
so that both i915 and xe do this the same way.
I first tried to fix this by having xe do the refcounting
from its intel_bo_set_frontbuffer() implementation
(which is what i915 does currently), but turns out xe's
drm_gem_object_free() can sleep and thus drm_gem_object_put()
isn't safe to call while we hold fb_tracking.lock.
Fixes: 10690b8a49bc ("drm/i915/display: Add intel_fb_bo_framebuffer_fini")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251003145734.7634-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Alexander Gordeev:
- Compile the decompressor with -Wno-pointer-sign flag to avoid a clang
warning
- Fix incomplete conversion to flag output macros in __xsch(), to avoid
always zero return value instead of the expected condition code
- Remove superfluous newlines from inline assemblies to improve
compiler inlining decisions
- Expose firmware provided UID Checking state in sysfs regardless of
the device presence or state
- CIO does not unregister subchannels when the attached device is
invalid or unavailable. Update the purge function to remove I/O
subchannels if the device number is found on cio_ignore list
- Consolidate PAI crypto allocation and cleanup paths
- The uv_get_secret_metadata() function has been removed some few
months ago, remove also the function mention it in a comment
* tag 's390-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/uv: Fix comment of uv_find_secret() function
s390/pai_crypto: Consolidate PAI crypto allocation and cleanup paths
s390/cio: Update purge function to unregister the unused subchannels
s390/pci: Expose firmware provided UID Checking state in sysfs
s390: Remove superfluous newlines from inline assemblies
s390/cio/ioasm: Fix __xsch() condition code handling
s390: Add -Wno-pointer-sign to KBUILD_CFLAGS_DECOMPRESSOR
|
|
For queue-depth I/O policy, this patch fixes unbalanced I/Os across
nvme multipaths.
Issue Description:
The RETRY disposition incorrectly increments ns->ctrl->nr_active
counter and reinitializes iostat start-time. In such cases nr_active
counter never goes back to zero until that path disconnects and
reconnects.
Such a path is not chosen for new I/Os if multiple RETRY cases on a given
a path cause its queue-depth counter to be artificially higher compared
to other paths. This leads to unbalanced I/Os across paths.
The patch skips incrementing nr_active if NVME_MPATH_CNT_ACTIVE is already
set. And it skips restarting io stats if NVME_MPATH_IO_STATS is already set.
base-commit: e989a3da2d371a4b6597ee8dee5c72e407b4db7a
Fixes: d4d957b53d91eeb ("nvme-multipath: support io stats on the mpath device")
Signed-off-by: Amit Chaudhary <achaudhary@purestorage.com>
Reviewed-by: Randy Jennings <randyj@purestorage.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
