| Age | Commit message (Collapse) | Author |
|---|
|
The tablet is similar to the 22R Pro, but with a few annoying
differences. Its descriptors are bigger because of the tablet's split
coordinate system, I guess it's just that large. Thankfully, this is
easy enough to support as all we have to do is shift bytes around.
To help code re-use, I changed the signature of
uclogic_params_init_ugee_xppen_pro to accept a pen descriptor so we
didn't create yet-another initialization function.
I have been testing this locally for a month or so and it works great,
and also corroborated this with a few other testers. Since this touches
my 22R Pro code, I have tested and checked that it didn't regress that
device.
Signed-off-by: Joshua Goins <josh@redstrate.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Some controllers are very bad at updating the IMU, leading to these
messages spamming the syslog. Rate-limiting them helps with this a bit.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Some third-party controllers, such as the PB Tails CHOC, won't always
respond quickly on startup. Since this packet is needed for probe, and only
once during probe, let's just wait an extra second, which makes connecting
consistent.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Syzbot reported the following warning:
BUG: using smp_processor_id() in preemptible [00000000] code: dhcpcd/2879
caller is usbnet_skb_return+0x74/0x490 drivers/net/usb/usbnet.c:331
CPU: 1 UID: 0 PID: 2879 Comm: dhcpcd Not tainted 6.15.0-rc4-syzkaller-00098-g615dca38c2ea #0 PREEMPT(voluntary)
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x16c/0x1f0 lib/dump_stack.c:120
check_preemption_disabled+0xd0/0xe0 lib/smp_processor_id.c:49
usbnet_skb_return+0x74/0x490 drivers/net/usb/usbnet.c:331
usbnet_resume_rx+0x4b/0x170 drivers/net/usb/usbnet.c:708
usbnet_change_mtu+0x1be/0x220 drivers/net/usb/usbnet.c:417
__dev_set_mtu net/core/dev.c:9443 [inline]
netif_set_mtu_ext+0x369/0x5c0 net/core/dev.c:9496
netif_set_mtu+0xb0/0x160 net/core/dev.c:9520
dev_set_mtu+0xae/0x170 net/core/dev_api.c:247
dev_ifsioc+0xa31/0x18d0 net/core/dev_ioctl.c:572
dev_ioctl+0x223/0x10e0 net/core/dev_ioctl.c:821
sock_do_ioctl+0x19d/0x280 net/socket.c:1204
sock_ioctl+0x42f/0x6a0 net/socket.c:1311
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl fs/ioctl.c:892 [inline]
__x64_sys_ioctl+0x190/0x200 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x260 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
For historical and portability reasons, the netif_rx() is usually
run in the softirq or interrupt context, this commit therefore add
local_bh_disable/enable() protection in the usbnet_resume_rx().
Fixes: 43daa96b166c ("usbnet: Stop RX Q on MTU change")
Link: https://syzkaller.appspot.com/bug?id=81f55dfa587ee544baaaa5a359a060512228c1e1
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Zqiang <qiang.zhang@linux.dev>
Link: https://patch.msgid.link/20251011070518.7095-1-qiang.zhang@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, hidpp_send_message_sync() retries sending the message when the
device returns a busy error code, specifically HIDPP20_ERROR_BUSY, which
has a different meaning under RAP. This ends up being a problem because
this function is used for both FAP and RAP messages.
This issue is not noticeable on older receivers with unreachable devices
since they return HIDPP_ERROR_RESOURCE_ERROR (0x09), which is not equal to
HIDPP20_ERROR_BUSY (0x08).
However, newer receivers return HIDPP_ERROR_UNKNOWN_DEVICE (0x08) which
happens to equal to HIDPP20_ERROR_BUSY, causing unnecessary retries when
the device is not actually busy.
This is resolved by checking if the error response is FAP or RAP and
picking the respective ERROR_BUSY code.
Fixes: 60165ab774cb ("HID: logitech-hidpp: rework one more time the retries attempts")
Signed-off-by: Mavroudis Chatzilazaridis <mavchatz@protonmail.com>
Tested-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
When logitech-hidpp tries to communicate with an unreachable device paired
to a 046d:c547 lightspeed receiver, the following message is printed to the
console:
hidpp_root_get_protocol_version: received protocol error 0x08
This occurs because this receiver returns 0x08 (HIDPP_ERROR_UNKNOWN_DEVICE)
when a device is unreachable, compared to 0x09 (HIDPP_ERROR_RESOURCE_ERROR)
that the older receivers return.
This patch silences this harmless error by treating
HIDPP_ERROR_UNKNOWN_DEVICE the same as HIDPP_ERROR_RESOURCE_ERROR
in hidpp_root_get_protocol_version().
There are other checks for HIDPP_ERROR_RESOURCE_ERROR found in
battery-related functions, however this receiver does not trigger them when
the device is disconnected.
Signed-off-by: Mavroudis Chatzilazaridis <mavchatz@protonmail.com>
Tested-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This lightspeed receiver uses 13 byte mouse reports without an ID.
There are 5 additional vendor defined bytes appended to the report.
The workaround for such cases has been adjusted to handle these larger
reports.
The keyboard reports have a distinct layout with differing minimums and
maximums. Additionally, the LED reports now require a report ID of 1.
New keyboard and mouse descriptors have been added to reflect these
changes.
The devices attached to this receiver now report the status of their
battery in wireless mode, libratbag communicates with them and they can
be configured with Piper.
Fixes: 9d1bd9346241 ("HID: logitech-dj: Add support for a new lightspeed receiver iteration")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218172
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218094
Co-developed-by: Filipe Laíns <lains@riseup.net>
Signed-off-by: Filipe Laíns <lains@riseup.net>
Signed-off-by: Mavroudis Chatzilazaridis <mavchatz@protonmail.com>
Tested-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Add hw_brightness_changed support for the G510 keyboard, so that e.g.
GNOME will show an OSD notification when toggling the backlight on/off
with the button the keyboard.
Note that it is not possible to turn the backlight back on by writing
/sys/class/leds/.../brightness it can only be turned on by pressing
the button on the keyboard. To reflect this /sys/class/leds/.../brightness
will always report the last brightness value independent of the on/off
toggle built into the keyboard.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This patch adds ALWAYS_POLL quirk for the VRS R295 steering wheel joystick.
This device reboots itself every 8-10 seconds if it is not polled.
Signed-off-by: Oleg Makarenko <oleg@makarenk.ooo>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The Cooler Master Mice Dongle includes a vendor defined HID interface
alongside its mouse interface. Not polling it will cause the mouse to
stop responding to polls on any interface once woken up again after
going into power saving mode.
Add the HID_QUIRK_ALWAYS_POLL quirk alongside the Cooler Master VID and
the Dongle's PID.
Signed-off-by: Tristan Lobb <tristan.lobb@it-lobb.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
When CGX fails mapping to NIX, set the error code to -ENODEV, currently
err is zero and that is treated as success path.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/aLAdlCg2_Yv7Y-3h@stanley.mountain/
Fixes: d280233fc866 ("Octeontx2-af: Fix NIX X2P calibration failures")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251010204239.94237-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Syzkaller reported a stack OOB access in cp2112_write_req caused by lack
of parameter validation for the user input in I2C SMBUS ioctl in cp2112
driver
Add the parameter validation for the data->block[0] to be bounded by
I2C_SMBUS_BLOCK_MAX + the additional compatibility padding
[jkosina@suse.com: fix whitespace damage]
Reported-by: syzbot+7617e19c8a59edfbd879@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7617e19c8a59edfbd879
Tested-by: syzbot+7617e19c8a59edfbd879@syzkaller.appspotmail.com
Signed-off-by: Deepak Sharma <deepak.sharma.472935@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Add the missing PCI ID for the quickspi device used on
the Lenovo Yoga Pro 9i 16IAH10.
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=220567
Signed-off-by: Abhishek Tamboli <abhishektamboli9@gmail.com>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
We should try to get rid of checks that depend on struct
drm_i915_private (or struct xe_device) in display code. HAS_FLAT_CCS()
is one of them. In the interest of simplicity, add a reversed
HAS_AUX_CCS() feature check macro, as that's we mostly use it for in
display.
v2: include adl-p (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20251013144552.1710851-1-jani.nikula@intel.com
|
|
We should try to get rid of checks that depend on struct
drm_i915_private (or struct xe_device) in display
code. HAS_128_BYTE_Y_TILING() is one of them. In the interest of
simplicity, just duplicate the check as HAS_128B_Y_TILING() in display.
v2: gen2 also has 128-byte Y-tile
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/2a7877f8f1d11114c1a17869bd24d83e13b1fac2.1760094361.git.jani.nikula@intel.com
|
|
Gen 2 platforms actually have 128-byte Y-tile, it's just different from
the 128-byte Y-tile on i945+. Make the HAS_128_BYTE_Y_TILING() feature
check macro and its usage slightly less convoluted by including gen 2 in
it.
i915_tiling_ok() would strictly not need changing, but separate the if
clauses to emphasize gen 2 X-tile also being 128 bytes.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/41bf9d67a11f38f4ab0f82740f38d5c8fe0bb58b.1760094361.git.jani.nikula@intel.com
|
|
Backmerging to bring in 6.18-rc1.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
On SoCs, like the SAM9X75, which embed the XLCDC ip, the registers that
configure the unified scaling engine were not filled with proper values.
Indeed, for YCbCr formats, the VXSCFACT bitfield of the HEOCFG25
register and the HXSCFACT bitfield of the HEOCFG27 register were
incorrect.
For 4:2:0 formats, both vertical and horizontal factors for
chroma chanels should be divided by 2 from the factors for the luma
channel. Hence:
HEOCFG24.VXSYFACT = VFACTOR
HEOCFG25.VSXCFACT = VFACTOR / 2
HEOCFG26.HXSYFACT = HFACTOR
HEOCFG27.HXSCFACT = HFACTOR / 2
However, for 4:2:2 formats, only the horizontal factor for chroma
chanels should be divided by 2 from the factor for the luma channel;
the vertical factor is the same for all the luma and chroma channels.
Hence:
HEOCFG24.VXSYFACT = VFACTOR
HEOCFG25.VXSCFACT = VFACTOR
HEOCFG26.HXSYFACT = HFACTOR
HEOCFG27.HXSCFACT = HFACTOR / 2
Fixes: d498771b0b83 ("drm: atmel_hlcdc: Add support for XLCDC using IP specific driver ops")
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@microchip.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20241014094942.325211-1-manikandan.m@microchip.com
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
|
|
edge detection
The original implementation used level detection for the first interrupt
after device reset to avoid potential interrupt line noise and missed
interrupts during the initialization phase. However, this approach
introduced unintended side effects when tested with certain touch panels,
including:
- Delayed hardware interrupt response
- Multiple spurious interrupt triggers
Switching back to edge detection for the first interrupt resolves these
issues while maintaining reliable interrupt handling.
Extensive testing across multiple platforms with touch panels from
various vendors confirms this change introduces no regressions.
[jkosina@suse.com: properly capitalize shortlog]
Fixes: 9d8d51735a3a ("HID: intel-thc-hid: intel-quickspi: Add HIDSPI protocol implementation")
Tested-by: Rui Zhang <rui1.zhang@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The type definition of qcdev->i2c_max_frame_size is already
u32, so remove the unnecessary type casting le16_to_cpu.
Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202509280841.pxmgBzKW-lkp@intel.com/
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Add support for Orion2 throttle configurations with more than 32 buttons
on the grip handle (this means the device reports more than 80 buttons).
Map additional button codes to KEY_MACRO1 .. KEY_MACRO28.
Make the module simpler, removing report descriptor fixup.
[jkosina@suse.com: fix changelog]
Signed-off-by: Ivan Gorinov <linux-kernel@altimeter.info>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The Logitech G13 is a gaming keypad with general-purpose macro keys,
four LED-backlit macro preset keys, five "menu" keys, backlight toggle
key, an analog thumbstick, RGB LED backlight, and a monochrome LCD
display.
Support input event generation for all keys and the thumbstick, and
expose all LEDs.
Signed-off-by: Leo L. Schwab <ewhac@ewhac.org>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Tested-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Updating drm-misc-fixes to the state of v6.18-rc1.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
update the LCDC_ATTRE register in drm plane atomic_disable to handle
the configuration changes of each layer when a plane is disabled.
Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20241014064644.292943-1-manikandan.m@microchip.com
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
|
|
Add entries detailing the clocks and resets for the ISP in the
RZ/V2H(P) SoC.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251010-rzv2h_isp_clk-v2-1-2c8853a9af7c@ideasonboard.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add clock and reset entries for USB2.
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251001212709.579080-10-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The use of IS_ERR_OR_NULL() suggests that "clk" can be a NULL pointer.
Hence smatch assumes so, and issues a "passing zero to 'PTR_ERR'"
warning.
At these checkpoints, "clk" always contains either a valid pointer, or
an error pointer (none of the functions called return NULL pointers).
Hence replace IS_ERR_OR_NULL() by IS_ERR().
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202408032025.ve2JMaoV-lkp@intel.com/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/81260328acb5c78e915ab04afad3901a31c16128.1758793709.git.geert+renesas@glider.be
|
|
Semicolons after end of function braces are not needed, remove them.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/deb1537b5f96d991332db5c8088bae705f7e17e3.1758718886.git.geert+renesas@glider.be
|
|
Renesas RZ/T2H (R9A09G077) and RZ/N2H (R9A09G087) SoCs have three 12-bit
ADC peripherals, each with their own peripheral clock.
For conversion, they use the PCLKL clock.
Add their clocks to the list of module clocks.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250923160524.1096720-2-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
On R-Car V4H, the PCIEC controller DBI read would generate an SError in
case the controller reset is released by writing SRSTCLR register first,
and immediately afterward reading some PCIEC controller DBI register.
The issue triggers in rcar_gen4_pcie_additional_common_init() on
dw_pcie_readl_dbi(dw, PCIE_PORT_LANE_SKEW), which on V4H is the first
read after reset_control_deassert(dw->core_rsts[DW_PCIE_PWR_RST].rstc).
The reset controller which contains the SRSTCLR register and the PCIEC
controller which contains the DBI register share the same root access
bus, but the bus then splits into separate segments before reaching each
IP. Even if the SRSTCLR write access was posted on the bus before the
DBI read access, it seems the DBI read access may reach the PCIEC
controller before the SRSTCLR write completed, and trigger the SError.
Mitigate the issue by adding a dummy SRSTCLR read, which assures the
SRSTCLR write completes fully and is latched into the reset controller,
before the PCIEC DBI read access can occur.
Fixes: 0ab55cf18341 ("clk: renesas: cpg-mssr: Add support for R-Car V4H")
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250922162113.113223-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
R-Car V4H Reference Manual R19UH0186EJ0130 Rev.1.30 Apr. 21, 2025 page
583 Figure 9.3.1(a) Software Reset flow (A) as well as flow (B) / (C)
indicate after reset has been asserted by writing a matching reset bit
into register SRCR, it is mandatory to wait 1ms.
This 1ms delay is documented on R-Car V4H and V4M, it is currently
unclear whether S4 is affected as well. This patch does apply the extra
delay on R-Car S4 as well.
Fix the reset driver to respect the additional delay when toggling
resets. Drivers which use separate reset_control_(de)assert() must
assure matching delay in their driver code.
Fixes: 0ab55cf18341 ("clk: renesas: cpg-mssr: Add support for R-Car V4H")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250918030552.331389-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Semicolons after end of function braces are not needed, remove them.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/99db8c1bfb64980b54a4b5c4988c7935609133e1.1758718027.git.geert+renesas@glider.be
|
|
Semicolons after end of function braces are unnecessary, remove them.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250923174951.1136259-1-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
PMC restore needs unlocking the register using the PWPR register.
Fixes: ede014cd1ea6422d ("pinctrl: renesas: rzg2l: Add function pointer for PMC register write")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250921111557.103069-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Remove duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250918200409.37284-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
There is no need to reconfigure a pin if the pin's configuration
values are the same as the reset values. E.g. the PS0 pin configuration
for the NMI function is PMC = 1 and PFC = 0, which is the same as the
reset values. Currently the code is first setting it to GPIO HI-Z state
and then again reconfiguring to the NMI function, leading to spurious
IRQs. Fix this by dropping unnecessary pin configuration from the
driver.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250909104247.3309-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Commit 1d2da79708cb ("pinctrl: renesas: rzg2l: Avoid configuring ISEL in
gpio_irq_{en,dis}able*()") dropped the configuration of ISEL from
struct irq_chip::{irq_enable, irq_disable} APIs and moved it to
struct gpio_chip::irq::{child_to_parent_hwirq,
child_irq_domain_ops::free} APIs to fix spurious IRQs.
After commit 1d2da79708cb ("pinctrl: renesas: rzg2l: Avoid configuring ISEL
in gpio_irq_{en,dis}able*()"), ISEL was no longer configured properly on
resume. This is because the pinctrl resume code used
struct irq_chip::irq_enable (called from rzg2l_gpio_irq_restore()) to
reconfigure the wakeup interrupts. Some drivers (e.g. Ethernet) may also
reconfigure non-wakeup interrupts on resume through their own code,
eventually calling struct irq_chip::irq_enable.
Fix this by adding ISEL configuration back into the
struct irq_chip::irq_enable API and on resume path for wakeup interrupts.
As struct irq_chip::irq_enable needs now to lock to update the ISEL,
convert the struct rzg2l_pinctrl::lock to a raw spinlock and replace the
locking API calls with the raw variants. Otherwise the lockdep reports
invalid wait context when probing the adv7511 module on RZ/G2L:
[ BUG: Invalid wait context ]
6.17.0-rc5-next-20250911-00001-gfcfac22533c9 #18 Not tainted
-----------------------------
(udev-worker)/165 is trying to lock:
ffff00000e3664a8 (&pctrl->lock){....}-{3:3}, at: rzg2l_gpio_irq_enable+0x38/0x78
other info that might help us debug this:
context-{5:5}
3 locks held by (udev-worker)/165:
#0: ffff00000e890108 (&dev->mutex){....}-{4:4}, at: __driver_attach+0x90/0x1ac
#1: ffff000011c07240 (request_class){+.+.}-{4:4}, at: __setup_irq+0xb4/0x6dc
#2: ffff000011c070c8 (lock_class){....}-{2:2}, at: __setup_irq+0xdc/0x6dc
stack backtrace:
CPU: 1 UID: 0 PID: 165 Comm: (udev-worker) Not tainted 6.17.0-rc5-next-20250911-00001-gfcfac22533c9 #18 PREEMPT
Hardware name: Renesas SMARC EVK based on r9a07g044l2 (DT)
Call trace:
show_stack+0x18/0x24 (C)
dump_stack_lvl+0x90/0xd0
dump_stack+0x18/0x24
__lock_acquire+0xa14/0x20b4
lock_acquire+0x1c8/0x354
_raw_spin_lock_irqsave+0x60/0x88
rzg2l_gpio_irq_enable+0x38/0x78
irq_enable+0x40/0x8c
__irq_startup+0x78/0xa4
irq_startup+0x108/0x16c
__setup_irq+0x3c0/0x6dc
request_threaded_irq+0xec/0x1ac
devm_request_threaded_irq+0x80/0x134
adv7511_probe+0x928/0x9a4 [adv7511]
i2c_device_probe+0x22c/0x3dc
really_probe+0xbc/0x2a0
__driver_probe_device+0x78/0x12c
driver_probe_device+0x40/0x164
__driver_attach+0x9c/0x1ac
bus_for_each_dev+0x74/0xd0
driver_attach+0x24/0x30
bus_add_driver+0xe4/0x208
driver_register+0x60/0x128
i2c_register_driver+0x48/0xd0
adv7511_init+0x5c/0x1000 [adv7511]
do_one_initcall+0x64/0x30c
do_init_module+0x58/0x23c
load_module+0x1bcc/0x1d40
init_module_from_file+0x88/0xc4
idempotent_init_module+0x188/0x27c
__arm64_sys_finit_module+0x68/0xac
invoke_syscall+0x48/0x110
el0_svc_common.constprop.0+0xc0/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x4c/0x160
el0t_64_sync_handler+0xa0/0xe4
el0t_64_sync+0x198/0x19c
Having ISEL configuration back into the struct irq_chip::irq_enable API
should be safe with respect to spurious IRQs, as in the probe case IRQs
are enabled anyway in struct gpio_chip::irq::child_to_parent_hwirq. No
spurious IRQs were detected on suspend/resume, boot, ethernet link
insert/remove tests (executed on RZ/G3S). Boot, ethernet link
insert/remove tests were also executed successfully on RZ/G2L.
Fixes: 1d2da79708cb ("pinctrl: renesas: rzg2l: Avoid configuring ISEL in gpio_irq_{en,dis}able*(")
Cc: stable@vger.kernel.org
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250912095308.3603704-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The vop2_plane_atomic_check() function incorrectly checks
drm_rect_width(dest) twice instead of verifying both width and height.
Fix the second condition to use drm_rect_height(dest) so that invalid
destination rectangles with height < 4 are correctly rejected.
Fixes: 604be85547ce ("drm/rockchip: Add VOP2 driver")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251012142005.660727-1-alok.a.tiwari@oracle.com
|
|
During interface toggle operations (ifdown/ifup), the driver currently
resets the local helper variable 'phy_link' to -1. This causes the link
state machine to incorrectly interpret the state as a link change event,
resulting in spurious "Link is down" messages being logged when the
interface is brought back up.
Preserve the phy_link state across interface toggles to avoid treating
the -1 sentinel value as a legitimate link state transition.
Fixes: 88131a812b16 ("amd-xgbe: Perform phy connect/disconnect at dev open/stop")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Link: https://patch.msgid.link/20251010065142.1189310-1-Raju.Rangoju@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
DbC is currently only enabled back if it's in configured state during
suspend.
If system is suspended after DbC is enabled, but before the device is
properly enumerated by the host, then DbC would not be enabled back in
resume.
Always enable DbC back in resume if it's suspended in enabled,
connected, or configured state
Cc: stable <stable@kernel.org>
Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver")
Tested-by: Łukasz Bartosik <ukaszb@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
DbC may add 1024 bogus bytes to the beginneing of the receiving endpoint
if DbC hw triggers a STALL event before any Transfer Blocks (TRBs) for
incoming data are queued, but driver handles the event after it queued
the TRBs.
This is possible as xHCI DbC hardware may trigger spurious STALL transfer
events even if endpoint is empty. The STALL event contains a pointer
to the stalled TRB, and "remaining" untransferred data length.
As there are no TRBs queued yet the STALL event will just point to first
TRB position of the empty ring, with '0' bytes remaining untransferred.
DbC driver is polling for events, and may not handle the STALL event
before /dev/ttyDBC0 is opened and incoming data TRBs are queued.
The DbC event handler will now assume the first queued TRB (length 1024)
has stalled with '0' bytes remaining untransferred, and copies the data
This race situation can be practically mitigated by making sure the event
handler handles all pending transfer events when DbC reaches configured
state, and only then create dev/ttyDbC0, and start queueing transfers.
The event handler can this way detect the STALL events on empty rings
and discard them before any transfers are queued.
This does in practice solve the issue, but still leaves a small possible
gap for the race to trigger.
We still need a way to distinguish spurious STALLs on empty rings with '0'
bytes remaing, from actual STALL events with all bytes transmitted.
Cc: stable <stable@kernel.org>
Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver")
Tested-by: Łukasz Bartosik <ukaszb@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A recent change to hide USB3 root hubs of USB2-only controllers broke
registration of USB2 root hubs - allow_single_roothub is set too late,
and by this time xhci_run() has already deferred root hub registration
until after the shared HCD is added, which will never happen.
This makes such controllers unusable, but testers didn't notice since
they were only bothered by warnings about empty USB3 root hubs. The bug
causes problems to other people who actually use such HCs and I was
able to confirm it on an ordinary HC by patching to ignore USB3 ports.
Setting allow_single_roothub during early setup fixes things.
Reported-by: Arisa Snowbell <arisa.snowbell@gmail.com>
Closes: https://lore.kernel.org/linux-usb/CABpa4MA9unucCoKtSdzJyOLjHNVy+Cwgz5AnAxPkKw6vuox1Nw@mail.gmail.com/
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Closes: https://lore.kernel.org/linux-usb/lnb5bum7dnzkn3fc7gq6hwigslebo7o4ccflcvsc3lvdgnu7el@fvqpobbdoapl/
Fixes: 719de070f764 ("usb: xhci-pci: add support for hosts with zero USB3 ports")
Tested-by: Arisa Snowbell <arisa.snowbell@gmail.com>
Tested-by: Michal Kubecek <mkubecek@suse.cz>
Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The `ttm_resource_manager_usage()` function currently assumes `man->bdev` is non-NULL when accessing `man->bdev->lru_lock`.
However, in scenarios where the resource manager is not fully initialized (e.g., APU platforms that lack dedicated VRAM, or incomplete manager setup),
`man->bdev` may remain NULL. This leads to a NULL pointer dereference when attempting to acquire the `lru_lock`, triggering kernel OOPS.
Fix this by adding an explicit safety check for `man->bdev` before accessing its members:
- Use `WARN_ON_ONCE(!man->bdev)` to emit a one-time warning (a soft assertion) when `man->bdev` is NULL. This helps catch invalid usage patterns during debugging without breaking production workflows.
- Return 0 immediately if `man->bdev` is NULL, as a non-initialized manager cannot have valid resource usage to report.
Suggested-by: Christian König <christian.koenig@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://lore.kernel.org/r/20251013085849.1735612-1-Jesse.Zhang@amd.com
|
|
Sync to v6.18-rc1.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The color parameter passed to drm_draw_fill24() was truncated to 16
bits, leading to an incorrect color drawn to the target iosys_map.
Fix this behavior, widening the parameter to 32 bits.
Fixes: 31fa2c1ca0b2 ("drm/panic: Move drawing functions to drm_draw")
Signed-off-by: Francesco Valla <francesco@valla.it>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20251003-drm_draw_fill24_fix-v1-1-8fb7c1c2a893@valla.it
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
|
|
The driver is currently checking for PHYCR2 register presence in
rtl8211f_config_init(), but it does so after accessing PHYCR2 to
disable EEE. This was introduced in commit bfc17c165835 ("net:
phy: realtek: disable PHY-mode EEE"). Move the PHYCR2 presence
test before the EEE disablement and simplify the code.
Fixes: bfc17c165835 ("net: phy: realtek: disable PHY-mode EEE")
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20251011110309.12664-1-marek.vasut@mailbox.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since ixgbe_adapter is embedded in devlink, calling devlink_free()
prematurely in the ixgbe_remove() path can lead to UAF. Move devlink_free()
to the end.
KASAN report:
BUG: KASAN: use-after-free in ixgbe_reset_interrupt_capability+0x140/0x180 [ixgbe]
Read of size 8 at addr ffff0000adf813e0 by task bash/2095
CPU: 1 UID: 0 PID: 2095 Comm: bash Tainted: G S 6.17.0-rc2-tnguy.net-queue+ #1 PREEMPT(full)
[...]
Call trace:
show_stack+0x30/0x90 (C)
dump_stack_lvl+0x9c/0xd0
print_address_description.constprop.0+0x90/0x310
print_report+0x104/0x1f0
kasan_report+0x88/0x180
__asan_report_load8_noabort+0x20/0x30
ixgbe_reset_interrupt_capability+0x140/0x180 [ixgbe]
ixgbe_clear_interrupt_scheme+0xf8/0x130 [ixgbe]
ixgbe_remove+0x2d0/0x8c0 [ixgbe]
pci_device_remove+0xa0/0x220
device_remove+0xb8/0x170
device_release_driver_internal+0x318/0x490
device_driver_detach+0x40/0x68
unbind_store+0xec/0x118
drv_attr_store+0x64/0xb8
sysfs_kf_write+0xcc/0x138
kernfs_fop_write_iter+0x294/0x440
new_sync_write+0x1fc/0x588
vfs_write+0x480/0x6a0
ksys_write+0xf0/0x1e0
__arm64_sys_write+0x70/0xc0
invoke_syscall.constprop.0+0xcc/0x280
el0_svc_common.constprop.0+0xa8/0x248
do_el0_svc+0x44/0x68
el0_svc+0x54/0x160
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x1b0/0x1b8
Fixes: a0285236ab93 ("ixgbe: add initial devlink support")
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Tested-by: Rinitha S <sx.rinitha@intel.com>
Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251009-jk-iwl-net-2025-10-01-v3-6-ef32a425b92a@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Send to VF information about features supported by the PF driver.
Increase API version to 1.7.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251009-jk-iwl-net-2025-10-01-v3-5-ef32a425b92a@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There was backward compatibility in the terms of mailbox API. Various
drivers from various OSes supporting 10G adapters from Intel portfolio
could easily negotiate mailbox API.
This convention has been broken since introducing API 1.4.
Commit 0062e7cc955e ("ixgbevf: add VF IPsec offload code") added support
for IPSec which is specific only for the kernel ixgbe driver. None of the
rest of the Intel 10G PF/VF drivers supports it. And actually lack of
support was not included in the IPSec implementation - there were no such
code paths. No possibility to negotiate support for the feature was
introduced along with introduction of the feature itself.
Commit 339f28964147 ("ixgbevf: Add support for new mailbox communication
between PF and VF") increasing API version to 1.5 did the same - it
introduced code supported specifically by the PF ESX driver. It altered API
version for the VF driver in the same time not touching the version
defined for the PF ixgbe driver. It led to additional discrepancies,
as the code provided within API 1.6 cannot be supported for Linux ixgbe
driver as it causes crashes.
The issue was noticed some time ago and mitigated by Jake within the commit
d0725312adf5 ("ixgbevf: stop attempting IPSEC offload on Mailbox API 1.5").
As a result we have regression for IPsec support and after increasing API
to version 1.6 ixgbevf driver stopped to support ESX MBX.
To fix this mess add new mailbox op asking PF driver about supported
features. Basing on a response determine whether to set support for IPSec
and ESX-specific enhanced mailbox.
New mailbox op, for compatibility purposes, must be added within new API
revision, as API version of OOT PF & VF drivers is already increased to
1.6 and doesn't incorporate features negotiate op.
Features negotiation mechanism gives possibility to be extended with new
features when needed in the future.
Reported-by: Jacob Keller <jacob.e.keller@intel.com>
Closes: https://lore.kernel.org/intel-wired-lan/20241101-jk-ixgbevf-mailbox-v1-5-fixes-v1-0-f556dc9a66ed@intel.com/
Fixes: 0062e7cc955e ("ixgbevf: add VF IPsec offload code")
Fixes: 339f28964147 ("ixgbevf: Add support for new mailbox communication between PF and VF")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251009-jk-iwl-net-2025-10-01-v3-4-ef32a425b92a@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update supported API version and provide handler for
IXGBE_VF_GET_PF_LINK_STATE cmd.
Simply put stored values of link speed and link_up from adapter context.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Link: https://lore.kernel.org/stable/20250828095227.1857066-3-jedrzej.jagielski%40intel.com
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251009-jk-iwl-net-2025-10-01-v3-3-ef32a425b92a@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
