summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-11-11Merge tag 'md-6.19-20251111' of ↵Jens Axboe
gitolite.kernel.org:pub/scm/linux/kernel/git/mdraid/linux into for-6.19/block Pull MD changes from Yu: "- Change maintainer's email address (Yu Kuai) - Data can be lost if array is created with different lbs devices, fix this problem and record lbs of the array in metadata (Li Nan) - Fix rcu protection for md_thread (Yun Zhou) - Fix mddev kobject lifetime regression (Xiao Ni) - Enable atomic writes for md-linear (John Garry) - Some cleanups (Chen Ni, Huiwen He, Wu Guanghao)" * tag 'md-6.19-20251111' of gitolite.kernel.org:pub/scm/linux/kernel/git/mdraid/linux: md: allow configuring logical block size md: add check_new_feature module parameter md/raid0: Move queue limit setup before r0conf initialization md: init bioset in mddev_init md: delete md_redundancy_group when array is becoming inactive md: prevent adding disks with larger logical_block_size to active arrays md/raid5: remove redundant __GFP_NOWARN md: avoid repeated calls to del_gendisk md/md-llbitmap: Remove unneeded semicolon md/md-linear: Enable atomic writes Factor out code into md_should_do_recovery() md: fix rcu protection in md_wakeup_thread md: delete mddev kobj before deleting gendisk kobj MAINTAINERS: Update Yu Kuai's E-mail address
2025-11-11EDAC/altera: Handle OCRAM ECC enable after warm resetNiravkumar L Rabara
The OCRAM ECC is always enabled either by the BootROM or by the Secure Device Manager (SDM) during a power-on reset on SoCFPGA. However, during a warm reset, the OCRAM content is retained to preserve data, while the control and status registers are reset to their default values. As a result, ECC must be explicitly re-enabled after a warm reset. Fixes: 17e47dc6db4f ("EDAC/altera: Add Stratix10 OCRAM ECC support") Signed-off-by: Niravkumar L Rabara <niravkumarlaxmidas.rabara@altera.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: Dinh Nguyen <dinguyen@kernel.org> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20251111080801.1279401-1-niravkumarlaxmidas.rabara@altera.com
2025-11-11net/mlx5: E-Switch, support eswitch inactive modeSaeed Mahameed
Add support for eswitch switchdev inactive mode Inactive mode: Drop all traffic going to FDB, Remove mpfs l2 rules and disconnect adjacent vports. Active mode: Traffic flows through FDB, mpfs table populated, and adjacent vports are connected. Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Adithya Jayachandran <ajayachandra@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://patch.msgid.link/20251108070404.1551708-4-saeed@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-11-11net/mlx5: MPFS, add support for dynamic enable/disableSaeed Mahameed
MPFS (Multi PF Switch) is enabled by default in Multi-Host environments, the driver keeps a list of desired unicast mac addresses of all vports (vfs/Sfs) and applied to HW via L2_table FW command. Add API to dynamically apply the list of MACs to HW when needed for next patches, to utilize this new API in devlink eswitch active/in-active uAPI. Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Adithya Jayachandran <ajayachandra@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://patch.msgid.link/20251108070404.1551708-3-saeed@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-11-11Merge tag 'v6.18-rc5' into media-nextMauro Carvalho Chehab
Linux 6.18-rc5 * tag 'v6.18-rc5': (1016 commits) Linux 6.18-rc5 kbuild: Let kernel-doc.py use PYTHON3 override rtc: rx8025: fix incorrect register reference Revert "drm/nouveau: set DMA mask before creating the flush page" io_uring: fix regbuf vector size truncation compiler_types: Move unused static inline functions warning to W=2 smb: client: validate change notify buffer before copy tracing/tools: Fix incorrcet short option in usage text for --threads drm/xe: Enforce correct user fence signaling order using x86/microcode/AMD: Add more known models to entry sign checking drm/xe: Do clean shutdown also when using flr drm/xe: Move declarations under conditional branch drm/xe/guc: Synchronize Dead CT worker with unbind tracing: Fix memory leaks in create_field_var() ring-buffer: Do not warn in ring_buffer_map_get_reader() when reader catches up tracing: tprobe-events: Fix to put tracepoint_user when disable the tprobe tracing: tprobe-events: Fix to register tracepoint correctly gpio: tb10x: Drop unused tb10x_set_bits() function drm/amd/display: Enable mst when it's detected but yet to be initialized drm/amdgpu: Fix wait after reset sequence in S3 ...
2025-11-11drm/i915/rom: convert intel_rom interfaces to struct drm_deviceJani Nikula
Reduce the display dependency on struct drm_i915_private and i915_drv.h by converting the rom interface to struct drm_device. Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patch.msgid.link/20251110112048.2366725-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-11-11wifi: mwl8k: inject DSSS Parameter Set element into beacons if missingPawel Dembicki
Some Marvell AP firmware used with mwl8k misbehaves when beacon frames do not contain a WLAN_EID_DS_PARAMS element with the current channel. It was reported on OpenWrt Github issues [0]. When hostapd/mac80211 omits DSSS Parameter Set from the beacon (which is valid on some bands), the firmware stops transmitting sane frames and RX status starts reporting bogus channel information. This makes AP mode unusable. Newer Marvell drivers (mwlwifi [1]) hard-code DSSS Parameter Set into AP beacons for all chips, which suggests this is a firmware requirement rather than a mwl8k-specific quirk. Mirror that behaviour in mwl8k: when setting the beacon, check if WLAN_EID_DS_PARAMS is present, and if not, extend the beacon and inject a DSSS Parameter Set element, using the current channel from hw->conf.chandef.chan. Tested on Linksys EA4500 (88W8366). [0] https://github.com/openwrt/openwrt/issues/19088 [1] https://github.com/kaloz/mwlwifi/blob/db97edf20fadea2617805006f5230665fadc6a8c/hif/fwcmd.c#L675 Fixes: b64fe619e371 ("mwl8k: basic AP interface support") Tested-by: Antony Kolitsos <zeusomighty@hotmail.com> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Link: https://patch.msgid.link/20251111100733.2825970-3-paweldembicki@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-11-11Merge drm/drm-next into drm-intel-nextJani Nikula
Primarily sync with the drm_print.h changes from drm-misc. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-11-11wifi: cw1200: Fix potential memory leak in cw1200_bh_rx_helper()Abdun Nihaal
In one of the error paths, the memory allocated for skb_rx is not freed. Fix that by freeing it before returning. Fixes: a910e4a94f69 ("cw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsets") Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in> Link: https://patch.msgid.link/20251110175316.106591-1-nihaal@cse.iitm.ac.in Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-11-11w1: omap-hdq: Remove redundant pm_runtime_mark_last_busy() callsSakari Ailus
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(), pm_runtime_autosuspend() and pm_request_autosuspend() now include a call to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to pm_runtime_mark_last_busy(). Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Link: https://patch.msgid.link/20251111094302.95003-1-sakari.ailus@linux.intel.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2025-11-11media: siano: Remove redundant ternary operatorsLiao Yuanhong
For ternary operators in the form of "a ? false : true", if 'a' itself returns a boolean result, the ternary operator can be omitted. Remove redundant ternary operators to clean up the code. Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-11-11media: rc: st_rc: Fix reset control resource leakHaotian Zhang
The driver calls reset_control_get_optional_exclusive() but never calls reset_control_put() in error paths or in the remove function. This causes a resource leak when probe fails after successfully acquiring the reset control, or when the driver is unloaded. Switch to devm_reset_control_get_optional_exclusive() to automatically manage the reset control resource. Fixes: a4b80242d046 ("media: st-rc: explicitly request exclusive reset control") Cc: stable@vger.kernel.org Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-11-11media: ir-hix5hd2: Drop unused module aliasJohan Hovold
The driver has never supported anything but OF probing so drop the unused platform module alias. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-11-11macintosh/mac_hid: fix race condition in mac_hid_toggle_emumouseLong Li
The following warning appears when running syzkaller, and this issue also exists in the mainline code. ------------[ cut here ]------------ list_add double add: new=ffffffffa57eee28, prev=ffffffffa57eee28, next=ffffffffa5e63100. WARNING: CPU: 0 PID: 1491 at lib/list_debug.c:35 __list_add_valid_or_report+0xf7/0x130 Modules linked in: CPU: 0 PID: 1491 Comm: syz.1.28 Not tainted 6.6.0+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:__list_add_valid_or_report+0xf7/0x130 RSP: 0018:ff1100010dfb7b78 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffffffa57eee18 RCX: ffffffff97fc9817 RDX: 0000000000040000 RSI: ffa0000002383000 RDI: 0000000000000001 RBP: ffffffffa57eee28 R08: 0000000000000001 R09: ffe21c0021bf6f2c R10: 0000000000000001 R11: 6464615f7473696c R12: ffffffffa5e63100 R13: ffffffffa57eee28 R14: ffffffffa57eee28 R15: ff1100010dfb7d48 FS: 00007fb14398b640(0000) GS:ff11000119600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000010d096005 CR4: 0000000000773ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 80000000 Call Trace: <TASK> input_register_handler+0xb3/0x210 mac_hid_start_emulation+0x1c5/0x290 mac_hid_toggle_emumouse+0x20a/0x240 proc_sys_call_handler+0x4c2/0x6e0 new_sync_write+0x1b1/0x2d0 vfs_write+0x709/0x950 ksys_write+0x12a/0x250 do_syscall_64+0x5a/0x110 entry_SYSCALL_64_after_hwframe+0x78/0xe2 The WARNING occurs when two processes concurrently write to the mac-hid emulation sysctl, causing a race condition in mac_hid_toggle_emumouse(). Both processes read old_val=0, then both try to register the input handler, leading to a double list_add of the same handler. CPU0 CPU1 ------------------------- ------------------------- vfs_write() //write 1 vfs_write() //write 1 proc_sys_write() proc_sys_write() mac_hid_toggle_emumouse() mac_hid_toggle_emumouse() old_val = *valp // old_val=0 old_val = *valp // old_val=0 mutex_lock_killable() proc_dointvec() // *valp=1 mac_hid_start_emulation() input_register_handler() mutex_unlock() mutex_lock_killable() proc_dointvec() mac_hid_start_emulation() input_register_handler() //Trigger Warning mutex_unlock() Fix this by moving the old_val read inside the mutex lock region. Fixes: 99b089c3c38a ("Input: Mac button emulation - implement as an input filter") Signed-off-by: Long Li <leo.lilong@huawei.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250819091035.2263329-1-leo.lilong@huaweicloud.com
2025-11-11wifi: mac80211_hwsim: Fix possible NULL dereferenceIlan Peer
The 'vif' pointer in the Tx information might be NULL, e.g., in case of injected frames etc. and is not checked in all paths. Fix it. While at it, also directly use the local 'vif' pointer. Fixes: a37a6f54439b ("wifi: mac80211_hwsim: Add simulation support for NAN device") Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/linux-wireless/aNJUlyIiSTW9zZdr@stanley.mountain Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20251110140128.ec00ae795a32.I9c65659b52434189d8b2ba06710d482669a3887a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-11-11Merge tag 'ath-current-20251110' of ↵Johannes Berg
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath Jeff Johnson says: ================== ath.git update for v6.18-rc6 Fix an ath11k transmit status reporting issue. This issue has always been present, but not reported until recently. Bringing this through the current release since there is now a userspace entity that wants to leverage this. ================== Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-11-11Merge tag 'amd-drm-next-6.19-2025-11-07' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.19-2025-11-07: amdgpu: - Misc fixes - HMM cleanup - HDP flush rework - RAS updates - SMU 13.x updates - SI DPM cleanup - Suspend rework - UQ reset support - Replay/PSR fixes - HDCP updates - DC PMO fixes - DC pstate fixes - DCN4 fixes - GPUVM fixes - SMU 13 parition metrics - Fix possible fence leak in job cleanup - Hibernation fix - MST fix amdkfd: - HMM cleanup - Process cleanup fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patch.msgid.link/20251107145938.26669-1-alexander.deucher@amd.com
2025-11-10cpufreq/amd-pstate: Call cppc_set_auto_sel() only for online CPUsGautham R. Shenoy
amd_pstate_change_mode_without_dvr_change() calls cppc_set_auto_sel() for all the present CPUs. However, this callpath eventually calls cppc_set_reg_val() which accesses the per-cpu cpc_desc_ptr object. This object is initialized only for online CPUs via acpi_soft_cpu_online() --> __acpi_processor_start() --> acpi_cppc_processor_probe(). Hence, restrict calling cppc_set_auto_sel() to only the online CPUs. Fixes: 3ca7bc818d8c ("cpufreq: amd-pstate: Add guided mode control support via sysfs") Suggested-by: Mario Limonciello (AMD) (kernel.org) <superm1@kernel.org> Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
2025-11-10cpufreq/amd-pstate: Add static asserts for EPP indicesMario Limonciello (AMD)
In case a new index is introduced add a static assert to make sure that strings and values are updated. Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
2025-11-10cpufreq/amd-pstate: Fix some whitespace issuesMario Limonciello (AMD)
Add whitespace around the equals and remove leading space. Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
2025-11-10cpufreq/amd-pstate: Adjust return values in amd_pstate_update_status()Mario Limonciello (AMD)
get_mode_idx_from_str() already checks the upper boundary for a string sent. Drop the extra check in amd_pstate_update_status() and pass the return code if there is a failure. Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
2025-11-10cpufreq/amd-pstate: Make amd_pstate_get_mode_string() never return NULLMario Limonciello (AMD)
amd_pstate_get_mode_string() is only used by amd-pstate-ut. Set the failure path to use AMD_PSTATE_UNDEFINED ("undefined") to avoid showing "(null)" as a string when running test suite. Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
2025-11-10cpufreq/amd-pstate: Drop NULL value from amd_pstate_mode_stringMario Limonciello (AMD)
None of the users actually look for the NULL value. To avoid risk of regression introducing a new value but forgetting to add a string add a static assert to test AMD_PSTATE_MAX matches the array size. Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
2025-11-10cpufreq/amd-pstate: Use sysfs_match_string() for eppMario Limonciello (AMD)
Rather than scanning the buffer and manually matching the string use the sysfs macros. Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
2025-11-11md: allow configuring logical block sizeLi Nan
Previously, raid array used the maximum logical block size (LBS) of all member disks. Adding a larger LBS disk at runtime could unexpectedly increase RAID's LBS, risking corruption of existing partitions. This can be reproduced by: ``` # LBS of sd[de] is 512 bytes, sdf is 4096 bytes. mdadm -CRq /dev/md0 -l1 -n3 /dev/sd[de] missing --assume-clean # LBS is 512 cat /sys/block/md0/queue/logical_block_size # create partition md0p1 parted -s /dev/md0 mklabel gpt mkpart primary 1MiB 100% lsblk | grep md0p1 # LBS becomes 4096 after adding sdf mdadm --add -q /dev/md0 /dev/sdf cat /sys/block/md0/queue/logical_block_size # partition lost partprobe /dev/md0 lsblk | grep md0p1 ``` Simply restricting larger-LBS disks is inflexible. In some scenarios, only disks with 512 bytes LBS are available currently, but later, disks with 4KB LBS may be added to the array. Making LBS configurable is the best way to solve this scenario. After this patch, the raid will: - store LBS in disk metadata - add a read-write sysfs 'mdX/logical_block_size' Future mdadm should support setting LBS via metadata field during RAID creation and the new sysfs. Though the kernel allows runtime LBS changes, users should avoid modifying it after creating partitions or filesystems to prevent compatibility issues. Only 1.x metadata supports configurable LBS. 0.90 metadata inits all fields to default values at auto-detect. Supporting 0.90 would require more extensive changes and no such use case has been observed. Note that many RAID paths rely on PAGE_SIZE alignment, including for metadata I/O. A larger LBS than PAGE_SIZE will result in metadata read/write failures. So this config should be prevented. Link: https://lore.kernel.org/linux-raid/20251103125757.1405796-6-linan666@huaweicloud.com Signed-off-by: Li Nan <linan122@huawei.com> Reviewed-by: Xiao Ni <xni@redhat.com> Signed-off-by: Yu Kuai <yukuai@fnnas.com>
2025-11-11md: add check_new_feature module parameterLi Nan
Raid checks if pad3 is zero when loading superblock from disk. Arrays created with new features may fail to assemble on old kernels as pad3 is used. Add module parameter check_new_feature to bypass this check. Link: https://lore.kernel.org/linux-raid/20251103125757.1405796-5-linan666@huaweicloud.com Signed-off-by: Li Nan <linan122@huawei.com> Reviewed-by: Xiao Ni <xni@redhat.com> Signed-off-by: Yu Kuai <yukuai@fnnas.com>
2025-11-11md/raid0: Move queue limit setup before r0conf initializationLi Nan
Prepare for making logical blocksize configurable. This change has no impact until logical block size becomes configurable. Move raid0_set_limits() before create_strip_zones(). It is safe as fields modified in create_strip_zones() do not involve mddev configuration, and rdev modifications there are not used in raid0_set_limits(). 'blksize' in create_strip_zones() fetches mddev's logical block size, which is already the maximum aross all rdevs, so the later max() can be removed. Link: https://lore.kernel.org/linux-raid/20251103125757.1405796-4-linan666@huaweicloud.com Signed-off-by: Li Nan <linan122@huawei.com> Reviewed-by: Xiao Ni <xni@redhat.com> Signed-off-by: Yu Kuai <yukuai@fnnas.com>
2025-11-11md: init bioset in mddev_initLi Nan
IO operations may be needed before md_run(), such as updating metadata after writing sysfs. Without bioset, this triggers a NULL pointer dereference as below: BUG: kernel NULL pointer dereference, address: 0000000000000020 Call Trace: md_update_sb+0x658/0xe00 new_level_store+0xc5/0x120 md_attr_store+0xc9/0x1e0 sysfs_kf_write+0x6f/0xa0 kernfs_fop_write_iter+0x141/0x2a0 vfs_write+0x1fc/0x5a0 ksys_write+0x79/0x180 __x64_sys_write+0x1d/0x30 x64_sys_call+0x2818/0x2880 do_syscall_64+0xa9/0x580 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Reproducer ``` mdadm -CR /dev/md0 -l1 -n2 /dev/sd[cd] echo inactive > /sys/block/md0/md/array_state echo 10 > /sys/block/md0/md/new_level ``` mddev_init() can only be called once per mddev, no need to test if bioset has been initialized anymore. Link: https://lore.kernel.org/linux-raid/20251103125757.1405796-3-linan666@huaweicloud.com Fixes: d981ed841930 ("md: Add new_level sysfs interface") Signed-off-by: Li Nan <linan122@huawei.com> Reviewed-by: Xiao Ni <xni@redhat.com> Signed-off-by: Yu Kuai <yukuai@fnnas.com>
2025-11-11md: delete md_redundancy_group when array is becoming inactiveLi Nan
'md_redundancy_group' are created in md_run() and deleted in del_gendisk(), but these are not paired. Writing inactive/active to sysfs array_state can trigger md_run() multiple times without del_gendisk(), leading to duplicate creation as below: sysfs: cannot create duplicate filename '/devices/virtual/block/md0/md/sync_action' Call Trace: dump_stack_lvl+0x9f/0x120 dump_stack+0x14/0x20 sysfs_warn_dup+0x96/0xc0 sysfs_add_file_mode_ns+0x19c/0x1b0 internal_create_group+0x213/0x830 sysfs_create_group+0x17/0x20 md_run+0x856/0xe60 ? __x64_sys_openat+0x23/0x30 do_md_run+0x26/0x1d0 array_state_store+0x559/0x760 md_attr_store+0xc9/0x1e0 sysfs_kf_write+0x6f/0xa0 kernfs_fop_write_iter+0x141/0x2a0 vfs_write+0x1fc/0x5a0 ksys_write+0x79/0x180 __x64_sys_write+0x1d/0x30 x64_sys_call+0x2818/0x2880 do_syscall_64+0xa9/0x580 entry_SYSCALL_64_after_hwframe+0x4b/0x53 md: cannot register extra attributes for md0 Creation of it depends on 'pers', its lifecycle cannot be aligned with gendisk. So fix this issue by triggering 'md_redundancy_group' deletion when the array is becoming inactive. Link: https://lore.kernel.org/linux-raid/20251103125757.1405796-2-linan666@huaweicloud.com Fixes: 790abe4d77af ("md: remove/add redundancy group only in level change") Signed-off-by: Li Nan <linan122@huawei.com> Reviewed-by: Xiao Ni <xni@redhat.com> Signed-off-by: Yu Kuai <yukuai@fnnas.com>
2025-11-11md: prevent adding disks with larger logical_block_size to active arraysLi Nan
When adding a disk to a md array, avoid updating the array's logical_block_size to match the new disk. This prevents accidental partition table loss that renders the array unusable. The later patch will introduce a way to configure the array's logical_block_size. The issue was introduced before Linux 2.6.12-rc2. Link: https://lore.kernel.org/linux-raid/20250918115759.334067-2-linan666@huaweicloud.com/ Fixes: d2e45eace8 ("[PATCH] Fix raid "bio too big" failures") Signed-off-by: Li Nan <linan122@huawei.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Yu Kuai <yukuai@fnnas.com>
2025-11-10net: dsa: loop: use new helper fixed_phy_register_100fd to simplify the codeHeiner Kallweit
Use new helper fixed_phy_register_100fd to simplify the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://patch.msgid.link/922f1b45-1748-4dd2-87eb-9d018df44731@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-10net: mdio: fix resource leak in mdiobus_register_device()Buday Csaba
Fix a possible leak in mdiobus_register_device() when both a reset-gpio and a reset-controller are present. Clean up the already claimed reset-gpio, when the registration of the reset-controller fails, so when an error code is returned, the device retains its state before the registration attempt. Link: https://lore.kernel.org/all/20251106144603.39053c81@kernel.org/ Fixes: 71dd6c0dff51 ("net: phy: add support for reset-controller") Signed-off-by: Buday Csaba <buday.csaba@prolan.hu> Link: https://patch.msgid.link/4b419377f8dd7d2f63f919d0f74a336c734f8fff.1762584481.git.buday.csaba@prolan.hu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-10isdn: kcapi: add WQ_PERCPU to alloc_workqueue usersMarco Crivellari
Currently if a user enqueues a work item using schedule_delayed_work() the used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to schedule_work() that is using system_wq and queue_work(), that makes use again of WORK_CPU_UNBOUND. This lack of consistency cannot be addressed without refactoring the API. alloc_workqueue() treats all queues as per-CPU by default, while unbound workqueues must opt-in via WQ_UNBOUND. This default is suboptimal: most workloads benefit from unbound queues, allowing the scheduler to place worker threads where they’re needed and reducing noise when CPUs are isolated. This continues the effort to refactor workqueue APIs, which began with the introduction of new workqueues and a new alloc_workqueue flag in: commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq") commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag") This change adds a new WQ_PERCPU flag to explicitly request alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified. With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND), any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND must now use WQ_PERCPU. Once migration is complete, WQ_UNBOUND can be removed and unbound will become the implicit default. Suggested-by: Tejun Heo <tj@kernel.org> Signed-off-by: Marco Crivellari <marco.crivellari@suse.com> Link: https://patch.msgid.link/20251107134452.198378-1-marco.crivellari@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-11wifi: rtlwifi: rtl8188ee: correct allstasleep in P2P PS H2C commandPing-Ke Shih
The "->allstasleep" variable is a 1 bit bitfield. It can only be 0 or 1. This "= -1" assignement should be "= 0" as other chips and vendor driver. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/linux-wireless/5c992936-4e7b-4c0a-abfc-0ec0fb9ef9fd@suswa.mountain/T/#t Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/1762390172-21091-1-git-send-email-pkshih@realtek.com
2025-11-11wifi: rtw89: Enable the new rtw89_8852au moduleBitterblue Smith
Tested in station mode and a little in AP mode. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/180a5e77-9297-4ffc-80d5-191dfef47661@gmail.com
2025-11-11wifi: rtw89: Add rtw8852au.cBitterblue Smith
This is the entry point of the new rtw89_8852au module. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/9580e5be-2bd1-45f9-ab75-616b86e25694@gmail.com
2025-11-11wifi: rtw89: 8852a: Accept USB devices and load their MAC addressBitterblue Smith
Make rtw8852a_read_efuse() accept USB devices and load the MAC address from the correct offset. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/97412e2c-ac98-403c-9056-9d9fe1ed9f28@gmail.com
2025-11-11wifi: rtw89: Add rtw8852a_hfc_param_ini_usbBitterblue Smith
"hfc" means "hci fc" which is "Host Control Interface Flow Control". These are some parameters needed for RTL8852AU. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/d1032888-2a53-4c52-a8b9-6e00cd6758dc@gmail.com
2025-11-11wifi: rtw89: Add rtw8852a_dle_mem_usbBitterblue Smith
Add rtw8852a_dle_mem_usb and its various quotas and sizes in struct rtw89_mac_size_set. "dle" could be "Data Link Engine" or "Double Link Engine". These are some parameters needed for RTL8852AU. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/d0a09039-97a8-4501-b023-510c126d8c61@gmail.com
2025-11-10net: ethernet: ti: am65-cpsw-qos: fix IET verify retry mechanismAksh Garg
The am65_cpsw_iet_verify_wait() function attempts verification 20 times, toggling the AM65_CPSW_PN_IET_MAC_LINKFAIL bit in each iteration. When the LINKFAIL bit transitions from 1 to 0, the MAC merge layer initiates the verification process and waits for the timeout configured in MAC_VERIFY_CNT before automatically retransmitting. The MAC_VERIFY_CNT register is configured according to the user-defined verify/response timeout in am65_cpsw_iet_set_verify_timeout_count(). As per IEEE 802.3 Clause 99, the hardware performs this automatic retry up to 3 times. Current implementation toggles LINKFAIL after the user-configured verify/response timeout in each iteration, forcing the hardware to restart verification instead of respecting the MAC_VERIFY_CNT timeout. This bypasses the hardware's automatic retry mechanism. Fix this by moving the LINKFAIL bit toggle outside the retry loop and reducing the retry count from 20 to 3. The software now only monitors the status register while the hardware autonomously handles the 3 verification attempts at proper MAC_VERIFY_CNT intervals. Fixes: 49a2eb9068246 ("net: ethernet: ti: am65-cpsw-qos: Add Frame Preemption MAC Merge support") Signed-off-by: Aksh Garg <a-garg7@ti.com> Link: https://patch.msgid.link/20251106092305.1437347-3-a-garg7@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-10net: ethernet: ti: am65-cpsw-qos: fix IET verify/response timeoutAksh Garg
The CPSW module uses the MAC_VERIFY_CNT bit field in the CPSW_PN_IET_VERIFY_REG_k register to set the verify/response timeout count. This register specifies the number of clock cycles to wait before resending a verify packet if the verification fails. The verify/response timeout count, as being set by the function am65_cpsw_iet_set_verify_timeout_count() is hardcoded for 125MHz clock frequency, which varies based on PHY mode and link speed. The respective clock frequencies are as follows: - RGMII mode: * 1000 Mbps: 125 MHz * 100 Mbps: 25 MHz * 10 Mbps: 2.5 MHz - QSGMII/SGMII mode: 125 MHz (all speeds) Fix this by adding logic to calculate the correct timeout counts based on the actual PHY interface mode and link speed. Fixes: 49a2eb9068246 ("net: ethernet: ti: am65-cpsw-qos: Add Frame Preemption MAC Merge support") Signed-off-by: Aksh Garg <a-garg7@ti.com> Link: https://patch.msgid.link/20251106092305.1437347-2-a-garg7@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-11wifi: rtw89: Use the correct power sequences for USB/SDIOBitterblue Smith
Make rtw89_mac_pwr_seq() select the right parts of the power sequences based on the interface type. This is only relevant for RTL8852A. The other chips don't use power sequences. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/dec13310-06eb-429e-acb8-4c5b62656836@gmail.com
2025-11-10bonding: fix mii_status when slave is downNicolas Dichtel
netif_carrier_ok() doesn't check if the slave is up. Before the below commit, netif_running() was also checked. Fixes: 23a6037ce76c ("bonding: Remove support for use_carrier") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Jay Vosburgh <jv@jvosburgh.net> Link: https://patch.msgid.link/20251106180252.3974772-1-nicolas.dichtel@6wind.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-10gve: Default to max_rx_buffer_size for DQO if device supportedAnkit Garg
Change the driver's default behavior to prefer the largest available RX buffer length supported by the device for DQO format, rather than always using the hardcoded 2K default. Previously, the driver would initialize with `GVE_DEFAULT_RX_BUFFER_SIZE` (2K), even if the device advertised support for a larger length (e.g., 4K). Performance observations: - With LRO disabled, we observed >10% improvement in RX single stream throughput when MTU >=2048. - With LRO enabled, we observed >10% improvement in RX single stream throughput when MTU >=1460. - No regressions were observed. Signed-off-by: Ankit Garg <nktgrg@google.com> Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com> Reviewed-by: Jordan Rhee <jordanrhee@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Joshua Washington <joshwash@google.com> Link: https://patch.msgid.link/20251106192746.243525-5-joshwash@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-10gve: Allow ethtool to configure rx_buf_lenAnkit Garg
Add support for getting and setting the RX buffer length via the ethtool ring parameters (`ethtool -g`/`-G`). The driver restricts the allowed buffer length to 2048 (SZ_2K) by default and allows 4096 (SZ_4K) based on device options. As XDP is only supported when the `rx_buf_len` is 2048, the driver now enforces this in two places: 1. In `gve_xdp_set`, rejecting XDP programs if the current buffer length is not 2048. 2. In `gve_set_rx_buf_len_config`, rejecting buffer length changes if XDP is loaded and the new length is not 2048. Signed-off-by: Ankit Garg <nktgrg@google.com> Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com> Reviewed-by: Jordan Rhee <jordanrhee@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Joshua Washington <joshwash@google.com> Link: https://patch.msgid.link/20251106192746.243525-4-joshwash@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-10gve: Use extack to log xdp config verification errorsAnkit Garg
Plumb extack as it allows us to send more detailed error messages back and append 'gve' suffix to method name per convention. NL_SET_ERR_MSG_FMT_MOD doesn't support format string longer than 80 chars so keeping netdev warning with actual queue count details. Signed-off-by: Ankit Garg <nktgrg@google.com> Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Joshua Washington <joshwash@google.com> Link: https://patch.msgid.link/20251106192746.243525-3-joshwash@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-10gve: Decouple header split from RX buffer lengthAnkit Garg
Previously, enabling header split via `gve_set_hsplit_config` also implicitly changed the RX buffer length to 4K (if supported by the device). This coupled two settings that should be orthogonal; this patch removes that side effect. After this change, `gve_set_hsplit_config` only toggles the header split configuration. The RX buffer length is no longer affected and must be configured independently. Signed-off-by: Ankit Garg <nktgrg@google.com> Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com> Reviewed-by: Jordan Rhee <jordanrhee@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Joshua Washington <joshwash@google.com> Link: https://patch.msgid.link/20251106192746.243525-2-joshwash@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-10net: stmmac: ingenic: use ->set_phy_intf_sel()Russell King (Oracle)
Rather than placing the phy_intf_sel() setup in the ->init() method, move it to the new ->set_phy_intf_sel() method. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1vHHqY-0000000Djrn-1D6H@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-10net: stmmac: ingenic: pass ingenic_mac struct rather than plat_datRussell King (Oracle)
It no longer makes sense to pass a pointer to struct plat_stmmacenet_data when calling the set_mode() methods to only use it to get a pointer to the ingenic_mac structure that we already had in the caller. Simplify this by passing the struct ingenic_mac pointer. Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1vHHqT-0000000Djrh-0ka3@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-10net: stmmac: ingenic: simplify x2000 mac_set_mode()Russell King (Oracle)
As per the previous commit, we have validated that the phy_intf_sel value is one that is permissible for this SoC, so there is no need to handle invalid PHY interface modes. We can also apply the other configuration based upon the phy_intf_sel value rather than the PHY interface mode. Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1vHHqO-0000000Djrb-0DPN@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2026-09-13 04:07:07 +0000