| Age | Commit message (Collapse) | Author |
|---|
|
To make use of Confidential VMBus channels, initialize the
co_ring_buffers and co_external_memory fields of the channel
structure.
Advertise support upon negotiating the version and compute
values for those fields and initialize them.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
The early failure path in __vmbus_establish_gpadl() doesn't deallocate
msginfo if the buffer fails to decrypt.
Fix the leak by breaking out the cleanup code into a separate function
and calling it where required.
Fixes: d4dccf353db80 ("Drivers: hv: vmbus: Mark vmbus ring buffer visible to host in Isolation VM")
Reported-by: Michael Kelley <mkhlinux@outlook.com>
Closes: https://lore.kernel.org/linux-hyperv/SN6PR02MB41573796F9787F67E0E97049D472A@SN6PR02MB4157.namprd02.prod.outlook.com
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Confidential VMBus is built around using buffers not shared with
the host.
Support allocating encrypted buffers when requested.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
The confidential VMBus runs with the paravisor SynIC and requires
configuring it with the paravisor.
Add the functions for configuring the paravisor SynIC. Update
overall SynIC initialization logic to initialize the SynIC if it
is present. Finally, break out SynIC interrupt enable/disable
code into separate functions so that SynIC interrupts can be
enabled or disabled via the paravisor instead of the hypervisor
if the paravisor SynIC is present.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
The confidential VMBus requires support for the both hypervisor
facing SynIC and the paravisor one.
Rename the functions that enable and disable SynIC with the
hypervisor. No functional changes.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
It might happen that some hyp SynIC pages aren't allocated.
Check for that and only then call iounmap().
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
The comment about the x2v shim is ancient and long since incorrect.
Remove the incorrect comment.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
When the confidential VMBus is available, the guest should post
messages to the paravisor.
Update hv_post_message() to post messages to the paravisor rather than
through GHCB or TD calls.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Confidential VMBus requires interacting with two SynICs -- one
provided by the host hypervisor, and one provided by the paravisor.
Each SynIC requires its own message and event pages.
Refactor and extend the existing code to add allocating and freeing
the message and event pages for the paravisor SynIC when it is
present.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Confidential VMBus requires interacting with two SynICs -- one
provided by the host hypervisor, and one provided by the paravisor.
Each SynIC requires its own message and event pages.
Rename the existing host-accessible SynIC message and event pages
with the "hyp_" prefix to clearly distinguish them from the paravisor
ones. The field name is also changed in mshv_root.* for consistency.
No functional changes.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
hv_set_non_nested_msr() has special handling for SINT MSRs
when a paravisor is present. In addition to updating the MSR on the
host, the mirror MSR in the paravisor is updated, including with the
proxy bit. But with Confidential VMBus, the proxy bit must not be
used, so add a special case to skip it.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
The existing Hyper-V wrappers for getting and setting MSRs are
hv_get/set_msr(). Via hv_get/set_non_nested_msr(), they detect
when running in a CoCo VM with a paravisor, and use the TDX or
SNP guest-host communication protocol to bypass the paravisor
and go directly to the host hypervisor for SynIC MSRs. The "set"
function also implements the required special handling for the
SINT MSRs.
Provide functions that allow manipulating the SynIC registers
through the paravisor. Move vmbus_signal_eom() to a more
appropriate location (which also avoids breaking KVM).
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
The confidential VMBus is supported starting from the protocol
version 6.0 onwards.
Provide the required definitions. No functional changes.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
When Secure AVIC is enabled, VMBus driver should
call x2apic Secure AVIC interface to allow Hyper-V
to inject VMBus message interrupt.
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
When the MSHV_ROOT_HVCALL ioctl is executing a hypercall, and gets
HV_STATUS_INSUFFICIENT_MEMORY, it deposits memory and then returns
-EAGAIN to userspace. The expectation is that the VMM will retry.
However, some VMM code in the wild doesn't do this and simply fails.
Rather than force the VMM to retry, change the ioctl to deposit
memory on demand and immediately retry the hypercall as is done with
all the other hypercall helper functions.
In addition to making the ioctl easier to use, removing the need for
multiple syscalls improves performance.
There is a complication: unlike the other hypercall helper functions,
in MSHV_ROOT_HVCALL the input is opaque to the kernel. This is
problematic for rep hypercalls, because the next part of the input
list can't be copied on each loop after depositing pages (this was
the original reason for returning -EAGAIN in this case).
Introduce hv_do_rep_hypercall_ex(), which adds a 'rep_start'
parameter. This solves the issue, allowing the deposit loop in
MSHV_ROOT_HVCALL to restart a rep hypercall after depositing pages
partway through.
Fixes: 621191d709b1 ("Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs")
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
This value in the VP stats page is used to track if the VP can be
dispatched for execution when there are no fast interrupts injected.
The original value of 201 was used in a version of the hypervisor
which did not ship. It was subsequently changed to 202 so that is the
correct value.
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Tariq Toukan says:
====================
mlx5-next updates 2025-11-13
The following pull-request contains common mlx5 updates
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Expose definition for 1600Gbps link mode
net/mlx5: fs, set non default device per namespace
net/mlx5: fs, Add other_eswitch support for steering tables
net/mlx5: Add OTHER_ESWITCH HW capabilities
net/mlx5: Add direct ST mode support for RDMA
PCI/TPH: Expose pcie_tph_get_st_table_loc()
{rdma,net}/mlx5: Query vports mac address from device
====================
Link: https://patch.msgid.link/1763027252-1168760-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rather than defining one xxx_GMAC_PHY_INTF_SEL_xxx() for each mode,
define xxx_GMAC_PHY_INTF_SEL() which takes the phy_intf_sel value.
Pass the appropriate value into these new macros in the set_to_xxx()
methods.
No change to produced code on aarch64.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vJbPG-0000000EBqb-2cF2@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The values used in the xxx_GMAC_PHY_INTF_SEL_xxx() macros are the
phy_intf_sel values used for the dwmac core. Use these to define these
constants.
No change to produced code on aarch64.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vJbPB-0000000EBqV-27GS@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert all bitfields to GRF_FIELD() or GRF_FIELD_CONST(), which makes
the bitfield values more readable, and also allows the aarch64 compiler
to produce better code.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vJbP6-0000000EBqP-1cmm@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Provide GRF_FIELD() which takes the high/low bit numbers of the field
and field value, generates the mask and passes it to FIELD_PREP_WM16.
Replace all HIWORD_UPDATE() instances with this.
No change to produced code on aarch64.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vJbP1-0000000EBqJ-1AjR@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit dc82a33297fc ("veth: apply qdisc backpressure on full ptr_ring to
reduce TX drops") introduced a race condition that can lead to a permanently
stalled TXQ. This was observed in production on ARM64 systems (Ampere Altra
Max).
The race occurs in veth_xmit(). The producer observes a full ptr_ring and
stops the queue (netif_tx_stop_queue()). The subsequent conditional logic,
intended to re-wake the queue if the consumer had just emptied it (if
(__ptr_ring_empty(...)) netif_tx_wake_queue()), can fail. This leads to a
"lost wakeup" where the TXQ remains stopped (QUEUE_STATE_DRV_XOFF) and
traffic halts.
This failure is caused by an incorrect use of the __ptr_ring_empty() API
from the producer side. As noted in kernel comments, this check is not
guaranteed to be correct if a consumer is operating on another CPU. The
empty test is based on ptr_ring->consumer_head, making it reliable only for
the consumer. Using this check from the producer side is fundamentally racy.
This patch fixes the race by adopting the more robust logic from an earlier
version V4 of the patchset, which always flushed the peer:
(1) In veth_xmit(), the racy conditional wake-up logic and its memory barrier
are removed. Instead, after stopping the queue, we unconditionally call
__veth_xdp_flush(rq). This guarantees that the NAPI consumer is scheduled,
making it solely responsible for re-waking the TXQ.
This handles the race where veth_poll() consumes all packets and completes
NAPI *before* veth_xmit() on the producer side has called netif_tx_stop_queue.
The __veth_xdp_flush(rq) will observe rx_notify_masked is false and schedule
NAPI.
(2) On the consumer side, the logic for waking the peer TXQ is moved out of
veth_xdp_rcv() and placed at the end of the veth_poll() function. This
placement is part of fixing the race, as the netif_tx_queue_stopped() check
must occur after rx_notify_masked is potentially set to false during NAPI
completion.
This handles the race where veth_poll() consumes all packets, but haven't
finished (rx_notify_masked is still true). The producer veth_xmit() stops the
TXQ and __veth_xdp_flush(rq) will observe rx_notify_masked is true, meaning
not starting NAPI. Then veth_poll() change rx_notify_masked to false and
stops NAPI. Before exiting veth_poll() will observe TXQ is stopped and wake
it up.
Fixes: dc82a33297fc ("veth: apply qdisc backpressure on full ptr_ring to reduce TX drops")
Reviewed-by: Toshiaki Makita <toshiaki.makita1@gmail.com>
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/176295323282.307447.14790015927673763094.stgit@firesoul
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert the bnx2x driver to use the new .get_rx_ring_count ethtool
operation instead of implementing .get_rxnfc solely for handling
ETHTOOL_GRXRINGS command. This simplifies the code by replacing the
switch statement with a direct return of the queue count.
The new callback provides the same functionality in a more direct way,
following the ongoing ethtool API modernization.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251112-bnx_grxrings-v1-1-1c2cb73979e2@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert the ixgbe driver to use the new .get_rx_ring_count ethtool
operation for handling ETHTOOL_GRXRINGS command. This simplifies the
code by extracting the ring count logic into a dedicated callback.
The new callback provides the same functionality in a more direct way,
following the ongoing ethtool API modernization.
This was compile-tested only.
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20251113-ixgbe_gxrings-v2-1-0ecf57808a78@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mlxsw_linecard_devlink_info_get()
The call to devlink_info_version_fixed_put() in
mlxsw_linecard_devlink_info_get() did not check for errors,
although it is checked everywhere in the code.
Add missed 'err' check to the mlxsw_linecard_devlink_info_get()
Fixes: 3fc0c51905fb ("mlxsw: core_linecards: Expose device PSID over device info")
Signed-off-by: Pavel Zhigulin <Pavel.Zhigulin@kaspersky.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20251113161922.813828-1-Pavel.Zhigulin@kaspersky.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The LED setup routine registered both led_sync_good
and led_is_gm devices without checking the return
values of led_classdev_register(). If either registration
failed, the function continued silently, leaving the
driver in a partially-initialized state and leaking
a registered LED classdev.
Add proper error handling
Fixes: 7d9ee2e8ff15 ("net: dsa: hellcreek: Add PTP status LEDs")
Signed-off-by: Pavel Zhigulin <Pavel.Zhigulin@kaspersky.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://patch.msgid.link/20251113135745.92375-1-Pavel.Zhigulin@kaspersky.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Current gu2host handler registered as MSI-X vector 0 and as per bspec for
a msix vector 0 interrupt, the driver must check the legacy registers
190008(TILE_INT_REG), 190060h (GT INTR Identity Reg 0) and other registers
mentioned in "Interrupt Service Routine Pseudocode" otherwise it will block
the next interrupts. To overcome this issue replacing guc2host handler
with legacy xe_irq_handler.
Fixes: da889070be7b2 ("drm/xe/irq: Separate MSI and MSI-X flows")
Bspec: 62357
Signed-off-by: Venkata Ramana Nayana <venkata.ramana.nayana@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patch.msgid.link/20251107083141.2080189-1-venkata.ramana.nayana@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Cache the ASPM L0s/L1 Supported bits early so quirks can override
them if necessary (Bjorn Helgaas)
- Add quirks for PA Semi and Freescale Root Ports and a HiSilicon Wi-Fi
device that are reported to have broken L0s and L1 (Shawn Lin, Bjorn
Helgaas)
* tag 'pci-v6.18-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/ASPM: Avoid L0s and L1 on Hi1105 [19e5:1105] Wi-Fi
PCI/ASPM: Avoid L0s and L1 on PA Semi [1959:a002] Root Ports
PCI/ASPM: Avoid L0s and L1 on Freescale [1957:0451] Root Ports
PCI/ASPM: Convert quirks to override advertised link states
PCI/ASPM: Add pcie_aspm_remove_cap() to override advertised link states
PCI/ASPM: Cache L0s/L1 Supported so advertised link states can be overridden
|
|
calculate used layers
When there are multiple Video Ports, and only one of them is working
(for example, VP1 is working while VP0 is not), in this case, the
win_mask of VP0 is 0. However, we have already set the port mux for VP0
according to vp0->nlayers, and at the same time, in the OVL_LAYER_SEL
register, there are windows will also be assigned to layers which will
map to the inactive VPs. In this situation, vp0->win_mask is zero as it
now working, it is more reliable to calculate the used layers based on
the configuration of the OVL_LAYER_SEL register.
Note: as the configuration of OVL_LAYER_SEL is take effect when the
vsync is come, so we use the value backup in vop2->old_layer_sel instead
of read OVL_LAYER_SEL directly.
Fixes: 3e89a8c68354 ("drm/rockchip: vop2: Fix the update of LAYER/PORT select registers when there are multi display output on rk3588/rk3568")
Cc: stable@vger.kernel.org
Reported-by: Diederik de Haas <diederik@cknow-tech.com>
Closes: https://bugs.kde.org/show_bug.cgi?id=511274
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Dang Huynh <dang.huynh@mainlining.org>
Tested-by: Diederik de Haas <diederik@cknow-tech.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251112085024.2480111-1-andyshrk@163.com
|
|
Use VOP for DMA operations performed by DRM core. Rockchip DRM driver
is backed by a virtual device that isn't IOMMU-capable, while VOP is the
actual display controller device backed by IOMMU. Fixes "swiotlb buffer
is full" warning messages originated from GEM prime code paths.
Note, that backporting is non-trivial as this depends on
commit 143ec8d3f9396 ("drm/prime: Support dedicated DMA device for dma-buf
imports"), which landed in v6.16 and commit 421be3ee36a4 ("drm/rockchip:
Refactor IOMMU initialisation"), which landed in v5.19.
Reported-by: Daniel Stone <daniels@collabora.com>
Fixes: 2048e3286f34 ("drm: rockchip: Add basic drm driver")
Cc: stable@vger.kernel.org # v6.16+
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251022161948.199731-1-dmitry.osipenko@collabora.com
|
|
PCI/TSM sysfs for physical function 0 devices, i.e. the "DSM" (Device
Security Manager), contains the 'connect' and 'disconnect' attributes.
After a successful 'connect' operation the DSM, its dependent functions
(SR-IOV virtual functions, non-zero multi-functions, or downstream
endpoints of a switch DSM) are candidates for being transitioned into a
TDISP (TEE Device Interface Security Protocol) operational state, via
pci_tsm_bind(). At present sysfs is blind to which devices are capable of
TDISP operation and it is ambiguous which functions are serviced by which
DSMs.
Add a 'dsm' attribute to identify a function's DSM device, and add a
'bound' attribute to identify when a function has entered a TDISP
operational state.
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Samuel Ortiz <sameo@rivosinc.com>
Cc: Alexey Kardashevskiy <aik@amd.com>
Cc: Xu Yilun <yilun.xu@linux.intel.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20251113021446.436830-9-dan.j.williams@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
A PCIe device function interface assigned to a TVM is a TEE Device
Interface (TDI). A TDI instantiated by pci_tsm_bind() needs additional
steps taken by the TVM to be accepted into the TVM's Trusted Compute
Boundary (TCB) and transitioned to the RUN state.
pci_tsm_guest_req() is a channel for the guest to request TDISP collateral,
like Device Interface Reports, and effect TDISP state changes, like
LOCKED->RUN transititions. Similar to IDE establishment and pci_tsm_bind(),
these are long running operations involving SPDM message passing via the
DOE mailbox.
The path for a TVM to invoke pci_tsm_guest_req() is:
* TSM triggers exit via guest-to-host-interface ABI (implementation specific)
* VMM invokes handler (KVM handle_exit() -> userspace io)
* handler issues request (userspace io handler -> ioctl() ->
pci_tsm_guest_req())
* handler supplies response
* VMM posts response, notifies/re-enters TVM
This path is purely a transport for messages from TVM to platform TSM. By
design the host kernel does not and must not care about the content of
these messages. I.e. the host kernel is not in the TCB of the TVM.
As this is an opaque passthrough interface, similar to fwctl, the kernel
requires that implementations stay within the bounds defined by 'enum
pci_tsm_req_scope'. Violation of those expectations likely has market and
regulatory consequences. Out of scope requests are blocked by default.
Co-developed-by: Xu Yilun <yilun.xu@linux.intel.com>
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20251113021446.436830-8-dan.j.williams@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
After a PCIe device has established a secure link and session between a TEE
Security Manager (TSM) and its local Device Security Manager (DSM), the
device or its subfunctions are candidates to be bound to a private memory
context, a TVM. A PCIe device function interface assigned to a TVM is a TEE
Device Interface (TDI).
The pci_tsm_bind() requests the low-level TSM driver to associate the
device with private MMIO and private IOMMU context resources of a given TVM
represented by a @kvm argument. A device in the bound state corresponds to
the TDISP protocol LOCKED state and awaits validation by the TVM. It is a
'struct pci_tsm_link_ops' operation because, similar to IDE establishment,
it involves host side resource establishment and context setup on behalf of
the guest. It is also expected to be performed lazily to allow for
operation of the device in non-confidential "shared" context for pre-lock
configuration.
Co-developed-by: Xu Yilun <yilun.xu@linux.intel.com>
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20251113021446.436830-7-dan.j.williams@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The PCIe spec defines two types of streams - selective and link. Each
stream has an ID from the same bucket so a stream ID does not tell the
type. The spec defines an "enable" bit for every stream and required
stream IDs to be unique among all enabled stream but there is no such
requirement for disabled streams.
However, when IDE_KM is programming keys, an IDE-capable device needs
to know the type of stream being programmed to write it directly to
the hardware as keys are relatively large, possibly many of them and
devices often struggle with keeping around rather big data not being
used.
Walk through all streams on a device and initialise the IDs to some
unique number, both link and selective.
The weakest part of this proposal is the host bridge ide_stream_ids_ida.
Technically, a Stream ID only needs to be unique within a given partner
pair. However, with "anonymous" / unassigned streams there is no convenient
place to track the available ids. Proceed with an ida in the host bridge
for now, but consider moving this tracking to be an ide_stream_ids_ida per
device.
Co-developed-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20251113021446.436830-6-dan.j.williams@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The address ranges for downstream Address Association Registers need to
cover memory addresses for all functions (PFs/VFs/downstream devices)
managed by a Device Security Manager (DSM). The proposed solution is get
the memory (32-bit only) range and prefetchable-memory (64-bit capable)
range from the immediate ancestor downstream port (either the direct-attach
RP or deepest switch port when switch attached).
Similar to RID association, address associations will be set by default if
hardware sets 'Number of Address Association Register Blocks' in the
'Selective IDE Stream Capability Register' to a non-zero value. TSM drivers
can opt-out of the settings by zero'ing out unwanted / unsupported address
ranges. E.g. TDX Connect only supports prefetachable (64-bit capable)
memory ranges for the Address Association setting.
If the immediate downstream port provides both a memory range and
prefetchable-memory range, but the IDE partner port only provides 1 Address
Association Register block then the TSM driver can pick which range to
associate, or let the PCI core prioritize memory.
Note, the Address Association Register setup for upstream requests is still
uncertain so is not included.
Co-developed-by: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Co-developed-by: Arto Merilainen <amerilainen@nvidia.com>
Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20251114010227.567693-1-dan.j.williams@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Since both RK3576 and RK3588 SoCs are capable of handling 10 bpc color
depth, introduce a pair of new helpers to program the necessary
registers, as well as passing bpc at PHY configuration level.
Note max_bpc is unconditionally set to 10 before initializing the QP
bridge library, as there is no need to adjust it dynamically, i.e. per
SoC variant, for now.
While setting up .enc_init() callbacks of rockchip_hdmi_qp_ctrl_ops,
also replace the unnecessary whitespace chars before .irq_callback()
assignments.
Acked-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251021-rk3588-10bpc-v3-5-3d3eed00a6db@collabora.com
|
|
For consistency and improved readability, redefine a few RK3576 specific
register configurations by relying on GENMASK() and unshifted values for
color depth and output format. Those are not used at the moment, but
will be needed soon to support the related features.
While at it, drop a few other defines which are unlikely to be ever
required.
Acked-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251021-rk3588-10bpc-v3-4-3d3eed00a6db@collabora.com
|
|
Stop relying on phy_set_bus_width() based workaround to setup the TMDS
character rate and, instead, use the recently introduced HDMI PHY
configuration API. This is also a prerequisite to enable high color
depth and FRL support.
Additionally, move the logic to ->atomic_check() callback where the
current mode rate is already provided by the connector state. As a
matter of fact this is actually necessary to ensure the link rate is
configured before VOP2 attempts to use the PHY PLL as a DCLK source in
vop2_crtc_atomic_enable(). The rationale is to restrict any changes of
the PHY rate via CCF and, instead, prefer the PHY configuration API for
this purpose.
Acked-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251021-rk3588-10bpc-v3-3-3d3eed00a6db@collabora.com
|
|
Extend struct dw_hdmi_qp_plat_data to include the supported display
output formats and maximum bits per color channel. When provided by the
platform driver, use them to setup the HDMI bridge accordingly.
Additionally, improve debug logging in dw_hdmi_qp_bridge_atomic_enable()
to also show the current HDMI output format and bpc.
Acked-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251021-rk3588-10bpc-v3-2-3d3eed00a6db@collabora.com
|
|
When making use of the HDMI PHY PLL as a VOP2 DCLK source, it's output
rate does normally match the mode clock. But this is only applicable
for default color depth of 8 bpc. For higher depths, the output clock
is further divided by the hardware according to the formula:
output rate = PHY PLL rate * 8 / bpc
Hence there is no need for VOP2 to compensate for bpc when adjusting
DCLK, but it is required to do so when computing its maximum operating
frequency.
Take color depth into consideration before deciding to switch DCLK
source.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251021-rk3588-10bpc-v3-1-3d3eed00a6db@collabora.com
|
|
during probing
The DRM_DEV_ERROR() has been deprecated, and use dev_err_probe()
can be better. The other reason is that dev_err_probe() help avoid
unexpected repeated err logs during defered probing.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251110075817.1159857-1-damon.ding@rock-chips.com
|
|
The name of the enable_gpio member in struct rockchip_hdmi_qp is too
generic, as initially "borrowed" from downstream BSP code. Moreover,
this hasn't been really in use so far, since there is neither a DT
providing an "enable-gpios" property to any of the "hdmi" nodes, nor a
binding documenting it.
The actual purpose of this GPIO line is to control the voltage bias for
the HDMI TX data lines when switching between TMDS and FRL operating
modes.
A previous patch introduced the "frl-enable-gpios" property of the
RK3588 HDMI TX Controller binding, hence pass the updated string to
devm_gpiod_get_optional(), rename the struct member accordingly and set
it to a low level.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251027222641.25066-3-laurent.pinchart@ideasonboard.com
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes, amdgpu and vmwgfx making up the most of it, along with
panthor and i915/xe.
Seems about right for this time of development, nothing major
outstanding.
client:
- Fix description of module parameter
panthor:
- Flush writes before mapping buffers
vmwgfx:
- Improve command validation
- Improve ref counting
- Fix cursor-plane support
amdgpu:
- Disallow P2P DMA for GC 12 DCC surfaces
- ctx error handling fix
- UserQ fixes
- VRR fix
- ISP fix
- JPEG 5.0.1 fix
amdkfd:
- Save area check fix
- Fix GPU mappings for APU after prefetch
i915:
- Fix PSR's pipe to vblank conversion
- Disable Panel Replay on MST links
xe:
- New HW workarounds affecting PTL and WCL platforms
* tag 'drm-fixes-2025-11-15' of https://gitlab.freedesktop.org/drm/kernel:
drm/client: fix MODULE_PARM_DESC string for "active"
drm/i915/dp_mst: Disable Panel Replay
drm/amdkfd: Fix GPU mappings for APU after prefetch
drm/amdkfd: relax checks for over allocation of save area
drm/amdgpu/jpeg: Add parse_cs for JPEG5_0_1
drm/amd/amdgpu: Ensure isp_kernel_buffer_alloc() creates a new BO
drm/amd/display: Allow VRR params change if unsynced with the stream
drm/amdgpu: fix lock warning in amdgpu_userq_fence_driver_process
drm/amdgpu: jump to the correct label on failure
drm/amdgpu: disable peer-to-peer access for DCC-enabled GC12 VRAM surfaces
drm/xe/xe3lpg: Extend Wa_15016589081 for xe3lpg
drm/xe/xe3: Extend wa_14023061436
drm/xe/xe3: Add WA_14024681466 for Xe3_LPG
drm/i915/psr: fix pipe to vblank conversion
drm/panthor: Flush shmem writes before mapping buffers CPU-uncached
drm/vmwgfx: Restore Guest-Backed only cursor plane support
drm/vmwgfx: Use kref in vmw_bo_dirty
drm/vmwgfx: Validate command header size against SVGA_CMD_MAX_DATASIZE
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- dw_mmc-rockchip: Fix internal phase calculation
- pxamci: Simplify and fix ->probe() error handling
- sdhci-of-dwcmshc: Fix strbin signal delay
- wmt-sdmmc: Fix compile test default
* tag 'mmc-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: dw_mmc-rockchip: Fix wrong internal phase calculate
mmc: pxamci: Simplify pxamci_probe() error handling using devm APIs
mmc: sdhci-of-dwcmshc: Change DLL_STRBIN_TAPNUM_DEFAULT to 0x4
mmc: wmt-sdmmc: fix compile test default
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
- imx: Fix reference count leak in ->remove()
- samsung: Rework legacy splash-screen handover workaround
- samsung: Fix potential memleak during ->probe()
- arm: Fix genpd leak on provider registration failure for scmi
* tag 'pmdomain-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: imx: Fix reference count leak in imx_gpc_remove
pmdomain: samsung: Rework legacy splash-screen handover workaround
pmdomain: arm: scmi: Fix genpd leak on provider registration failure
pmdomain: samsung: plug potential memleak during probe
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dave Jiang:
- Fix incorrect device handle check for Generic Initiator
- Fix offset calculation for extended linear cache poison injection
- Fix lockdep warning for hmem_register_resource()
* tag 'cxl-fixes-6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
acpi/hmat: Fix lockdep warning for hmem_register_resource()
cxl: Adjust offset calculation for poison injection
acpi,srat: Fix incorrect device handle check for Generic Initiator
|
|
https://git.pengutronix.de/git/pza/linux into arm/fixes
Reset controller fixes for v6.18
* Fix incorrect EARC reset masks in the reset-imx8mp-audiomix driver,
introduced in commit a83bc87cd30a.
* tag 'reset-fixes-for-v6.18' of https://git.pengutronix.de/git/pza/linux:
reset: imx8mp-audiomix: Fix bad mask values
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/fixes
Memory controller drivers - fixes for v6.18
Correct incorrect ID used for the memory controller client IDs in
Tegra210 Memory Controller driver, introduced in v6.18-rc1.
* tag 'memory-controller-drv-fixes-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: tegra210: Fix incorrect client ids
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few standard fixes here, plus one more interesting one from Hans
which addresses an issue where a move in when we requested GPIOs on
ACPI systems caused us to stop doing pinmuxing and leave things
floating that we'd really rather not have floating"
* tag 'spi-fix-v6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: Add TODO comment about ACPI GPIO setup
spi: xilinx: increase number of retries before declaring stall
spi: imx: keep dma request disabled before dma transfer setup
spi: Try to get ACPI GPIO IRQ earlier
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"One simple fix for a GPIO descriptor leak in the probe error handling
for the fixed regulator"
* tag 'regulator-fix-v6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: fixed: fix GPIO descriptor leak on register failure
|
