| Age | Commit message (Collapse) | Author |
|---|
|
wa_16023981245 need to be extended for display version 30.02
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250613193146.3549862-10-dnyaneshwar.bhadane@intel.com
|
|
WCL added a c10 phy connected to port B. PTL code is currently
restricting c10 to phy_a only.
PTL doesn't have a PHY connected to PORT B; as such,there will
never be a case where PTL uses PHY B.
WCL uses PORT A and B with the C10 PHY.Reusing the condition
for WCL and extending it for PORT B should not cause any issues
for PTL.
-v2: Reuse and extend PTL condition for WCL (Matt)
Bspec: 73944
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250613193146.3549862-9-dnyaneshwar.bhadane@intel.com
|
|
Display version 30.02 should be treated the same as other Xe3 IP.
So exteding DMC load path the condition for it.
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250613193146.3549862-8-dnyaneshwar.bhadane@intel.com
|
|
Display version 30.02 has a lower max cdclk rate than 30.00.
Bspec: 68861
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250613193146.3549862-6-dnyaneshwar.bhadane@intel.com
|
|
Bandwidth parameters for WCL have been updated with respect to
previous display releases. Encode them into xe3lpd_3002_sa_info and use
that new struct.
-v2: Resolve conflict to apply patch.
Bspec: 68859
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250613193146.3549862-5-dnyaneshwar.bhadane@intel.com
|
|
Convert mux_control_ops to a flexible array member at the end of the
mux_chip struct and add the __counted_by() compiler attribute to
improve access bounds-checking via CONFIG_UBSAN_BOUNDS and
CONFIG_FORTIFY_SOURCE.
Use struct_size() to calculate the number of bytes to allocate for a new
mux chip and to remove the following Coccinelle/coccicheck warning:
WARNING: Use struct_size
Use size_add() to safely add any extra bytes.
No functional changes intended.
Link: https://github.com/KSPP/linux/issues/83
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20250610104106.1948-2-thorsten.blum@linux.dev
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
NIX block can receive packets from multiple links such as
MAC (RPM), LBK and CPT.
-----------------
RPM --| NIX |
-----------------
|
|
LBK
Each link supports multiple channels for example RPM link supports
16 channels. In case of link oversubsribe, NIX will assert backpressure
on receive channels.
The previous patch considered a single channel per link, resulting in
backpressure not being enabled on the remaining channels
Fixes: a7ef63dbd588 ("octeontx2-af: Disable backpressure between CPT and NIX")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250617063403.3582210-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rely on existing IB_MTU_XXX definitions which exist in ib_verbs.h.
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/382c91ee506e7f1f3c1801957df6b28963484b7d.1750147222.git.leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-06-17 (ice, e1000e)
For ice:
Krishna Kumar modifies aRFS match criteria to correctly identify
matching filters.
Grzegorz fixes a memory leak in eswitch legacy mode.
For e1000e:
Vitaly sets clock frequency on some Nahum systems which may misreport
their value.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
e1000e: set fixed clock frequency indication for Nahum 11 and Nahum 13
ice: fix eswitch code memory leak in reset scenario
net: ice: Perform accurate aRFS flow match
====================
Link: https://patch.msgid.link/20250617172444.1419560-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Depending on e.g. DT configuration this driver uses a fixed link.
So we shouldn't rely on the user to enable FIXED_PHY, select it in
Kconfig instead. We may end up with a non-functional driver otherwise.
Fixes: 38561ded50d0 ("net: ftgmac100: support fixed link")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/476bb33b-5584-40f0-826a-7294980f2895@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
SNP Guest Request uses only exitinfo2 which is a return value from GHCB, has
meaning beyond ioctl and therefore belongs to struct snp_guest_req.
Move exitinfo2 there and remove snp_guest_request_ioctl from the SEV platform
code.
No functional change intended.
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Dionna Glaze <dionnaglaze@google.com>
Link: https://lore.kernel.org/20250611040842.2667262-2-aik@amd.com
|
|
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
RXFH is all this driver supports in RXNFC so old callbacks are
completely removed.
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250617014848.436741-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250617014848.436741-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
RXFH is all this driver supports in RXNFC so old callbacks are
completely removed.
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250617014848.436741-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250617014848.436741-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250617014848.436741-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
Link: https://patch.msgid.link/20250617014555.434790-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
The driver has no other RXNFC functionality so the SET callback can
be now removed.
Link: https://patch.msgid.link/20250617014555.434790-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
The driver has no other RXNFC functionality so the SET callback can
be now removed.
Reviewed-by: David Arinzon <darinzon@amazon.com>
Link: https://patch.msgid.link/20250617014555.434790-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250617014555.434790-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
The driver has no other RXNFC functionality so the SET callback can
be now removed.
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/20250617014555.434790-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the userspace governor is used, the user intends to set a fixed CPU
frequency for a policy, for whatever reason. The CPUFREQ_GOV_STRICT_TARGET
flag is the required behaviour. Without this flag, the intel_pstate driver,
with HWP enabled, will set HWP_MIN_PERF to the target frequency and
HWP_MAX_PERF to the policy maximum, when configuring the HWP_REQUEST MSR.
This lets the hardware choose any frequency between the target frequency
and the policy maximum, which is not the intended behaviour. To fix this,
`cat scaling_setspeed > scaling_max_freq` had to be done. With this patch,
that is no longer necessary. Setting scaling_setspeed is sufficient, as
expected.
Signed-off-by: Shashank Balaji <shashank.mahadasyam@sony.com>
Link: https://patch.msgid.link/20250527-userspace-governor-doc-v2-1-0e22c69920f2@sony.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add Wildcat Lake PCI ID for processor thermal device.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20250617231940.3314546-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
As reported in [1], a platform firmware update that increased the number
of method parameters and forgot to update a least one of its callers,
caused ACPICA to crash due to use-after-free.
Since this a result of a clear AML issue that arguably cannot be fixed
up by the interpreter (it cannot produce missing data out of thin air),
address it by making ACPICA refuse to evaluate a method if the caller
attempts to pass fewer arguments than expected to it.
Closes: https://github.com/acpica/acpica/issues/1027 [1]
Reported-by: Peter Williams <peter@newton.cx>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Tested-by: Hans de Goede <hansg@kernel.org> # Dell XPS 9640 with BIOS 1.12.0
Link: https://patch.msgid.link/5909446.DvuYhMxLoT@rjwysocki.net
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
CONFIG_ACPI_DEBUG can be helpful for getting debug messages on OEM
systems to identify a BIOS bug. It's a relatively small size increase
to turn it on by default (50kb) and that saves asking people to enable
it when an issue comes up because it wasn't in defconfig.
Enable it by default.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20250609030706.465202-1-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
cppc_cpufreq_register_em() is only used in populate_efficiency_class(). A
forward declaration of it is not necessary.
Move cppc_cpufreq_register_em() in front of populate_efficiency_class()
and remove the forward declaration of cppc_cpufreq_register_em().
No functional change.
Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://patch.msgid.link/20250526113057.3086513-4-zhenglifeng1@huawei.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The return value of populate_efficiency_class() is never needed and the
result of it doesn't affect the initialization of cppc_cpufreq.
It makes more sense to change it into a void function.
Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://patch.msgid.link/20250526113057.3086513-3-zhenglifeng1@huawei.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
After commit a28b2bfc099c ("cppc_cpufreq: replace per-cpu data array with a
list"), cpu_data can be got from policy->driver_data, so cpu_data_list is
not actually needed and can be removed.
Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://patch.msgid.link/20250526113057.3086513-2-zhenglifeng1@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add Wildcat Lake ACPI IDs for DPTF.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20250617231824.3314507-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In pci_msi_update_mask(), "lock = &to_pci_dev()" does the to_pci_dev()
lookup, and there's another one buried inside msi_desc_to_pci_dev().
Introduce a local variable to remove that duplication.
Signed-off-by: Chris Li <chrisl@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/all/20250617-pci-msi-avoid-dup-pcidev-v1-1-ed75b0419023@kernel.org
|
|
Enable injection using EINJv2 mode of operation.
[Tony: Mostly Zaid's original code. I just changed how the error ID
and syndrome bits are implemented. Also swapped out some camelcase
variable names]
Co-developed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Zaid Alali <zaidal@os.amperecomputing.com>
Link: https://patch.msgid.link/20250617193026.637510-7-zaidal@os.amperecomputing.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
EINJv2 allows users to inject multiple errors at the same time by
specifying the device id and syndrome bits for each error in a flex
array.
Create files in the einj debugfs directory to enter data for each
device id and syndrome value. Note that the specification says these
are 128-bit little-endian values. Linux doesn't have a handy helper
to manage objects of this type.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Zaid Alali <zaidal@os.amperecomputing.com>
Link: https://patch.msgid.link/20250617193026.637510-6-zaidal@os.amperecomputing.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The EINJv2 set_error_type_with_address structure has a flex array
to hold the component IDs and syndrome values used when injecting
multiple errors at once.
Discover the size of this array by taking the address from the
ACPI_EINJ_SET_ERROR_TYPE_WITH_ADDRESS entry in the EINJ table
and reading the BIOS copy of the structure.
Derive the maximum number of components from the length field
in the einjv2_extension_struct at the end of the BIOS copy.
Map the whole of the structure into kernel memory (and unmap
on module unload).
[Tony: Code unchanged from Zaid's original. New commit message]
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Zaid Alali <zaidal@os.amperecomputing.com>
Link: https://patch.msgid.link/20250617193026.637510-5-zaidal@os.amperecomputing.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add einjv2 extension struct and EINJv2 error types to prepare
the driver for EINJv2 support. ACPI specifications[1] enables
EINJv2 by extending set_error_type_with_address struct.
Link: https://uefi.org/specs/ACPI/6.6/18_Platform_Error_Interfaces.html#einjv2-extension-structure [1]
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Zaid Alali <zaidal@os.amperecomputing.com>
Link: https://patch.msgid.link/20250617193026.637510-4-zaidal@os.amperecomputing.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Enable the driver to show all supported error injections for EINJ
and EINJv2 at the same time. EINJv2 capabilities can be discovered
by checking the return value of get_error_type, where bit 30 set
indicates EINJv2 support.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Zaid Alali <zaidal@os.amperecomputing.com>
Link: https://patch.msgid.link/20250617193026.637510-3-zaidal@os.amperecomputing.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This patch fixes the kernel test robot warning reported here:
Link: https://lore.kernel.org/all/202410241620.oApALow5-lkp@intel.com/
Use pointers annotated with the __iomem marker for all iomem map calls,
and creates a local copy of the mapped IO memory for future access in
the code. memcpy_fromio() and memcpy_toio() are used to read/write data
from/to mapped IO memory.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Zaid Alali <zaidal@os.amperecomputing.com>
Link: https://patch.msgid.link/20250617193026.637510-2-zaidal@os.amperecomputing.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
A kernel panic was reported with the following kernel log:
EDAC igen6: Expected 2 mcs, but only 1 detected.
BUG: unable to handle page fault for address: 000000000000d570
...
Hardware name: Notebook V54x_6x_TU/V54x_6x_TU, BIOS Dasharo (coreboot+UEFI) v0.9.0 07/17/2024
RIP: e030:ecclog_handler+0x7e/0xf0 [igen6_edac]
...
igen6_probe+0x2a0/0x343 [igen6_edac]
...
igen6_init+0xc5/0xff0 [igen6_edac]
...
This issue occurred because one memory controller was disabled by
the BIOS but the igen6_edac driver still checked all the memory
controllers, including this absent one, to identify the source of
the error. Accessing the null MMIO for the absent memory controller
resulted in the oops above.
Fix this issue by reverting the configuration structure to non-const
and updating the field 'res_cfg->num_imc' to reflect the number of
detected memory controllers.
Fixes: 20e190b1c1fd ("EDAC/igen6: Skip absent memory controllers")
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Closes: https://lore.kernel.org/all/aFFN7RlXkaK_loQb@mail-itl/
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Link: https://lore.kernel.org/r/20250618162307.1523736-1-qiuxu.zhuo@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Niklas Cassel:
- Force PIO for ATAPI devices on VT6415/VT6330 as the controller locks
up on ATAPI DMA (Tasos)
- Fix ACPI PATA cable type detection such that the controller is not
forced down to a slow transfer mode (Tasos)
- Fix build error on 32-bit UML (Johannes)
- Fix a PCI region leak in the pata_macio driver so that the driver no
longer fails to load after rmmod (Philipp)
- Use correct DMI BIOS build date for ThinkPad W541 quirk (me)
- Disallow LPM for ASUSPRO-D840SA motherboard as this board
interestingly enough gets graphical corruptions on the iGPU when LPM
is enabled (me)
- Disallow LPM for Asus B550-F motherboard as this board will get
command timeouts on ports 5 and 6, yet LPM with the same drive works
fine on all other ports (Mikko)
* tag 'ata-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: ahci: Disallow LPM for Asus B550-F motherboard
ata: ahci: Disallow LPM for ASUSPRO-D840SA motherboard
ata: ahci: Use correct BIOS build date for ThinkPad W541 quirk
ata: pata_macio: Fix PCI region leak
ata: pata_cs5536: fix build on 32-bit UML
ata: libata-acpi: Do not assume 40 wire cable if no devices are enabled
ata: pata_via: Force PIO for ATAPI devices on VT6415/VT6330
|
|
Missing the mutex init.
Fixes: 47454f2dc0bf ("drm/amdgpu: Register the new sdma function pointers for sdma_v5_2")
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ea685ff30a51a25dd9be90786933ada49a088f65)
|
|
q->gws is not updated atomically with qpd->mapped_gws_queue. If a
runlist is created between pqm_set_gws and update_queue it will
contain a queue which uses GWS in a process with no GWS allocated.
This will result in a scheduler hang.
Use q->properties.is_gws which is changed while holding the DQM lock.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b98370220eb3110e82248e3354e16a489a492cfb)
Cc: stable@vger.kernel.org
|
|
Missing the mutex init.
Fixes: e56d4bf57fab ("drm/amdgpu/: drm/amdgpu: Register the new sdma function pointers for sdma_v5_0")
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3f4caf092f02f0de169c6122639af481c7edc8f9)
|
|
Use the amdgpu fence container so we can store additional
data in the fence. This also fixes the start_time handling
for MCBP since we were casting the fence to an amdgpu_fence
and it wasn't.
Fixes: 3f4c175d62d8 ("drm/amdgpu: MCBP based on DRM scheduler (v9)")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bf1cd14f9e2e1fdf981eed273ddd595863f5288c)
Cc: stable@vger.kernel.org
|
|
This commit makes two key fixes to SDMA v4.4.2 handling:
1. disable UTC_L1 in sdma_cntl register when stopping SDMA engines
by reading the current value before modifying UTC_L1_ENABLE bit.
2. Ensure UTC_L1_ENABLE is consistently managed by:
- Adding the missing register write when enabling UTC_L1 during start
- Keeping UTC_L1 enabled by default as per hardware requirements
v2: Correct SDMA_CNTL setting (Philip)
Suggested-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 375bf564654e85a7b1b0657b191645b3edca1bda)
Cc: stable@vger.kernel.org
|
|
Make sure to release reset domain lock in case of failures.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Fixes: 11bb33766f66 ("drm/amdgpu: refactor amdgpu_device_gpu_recover")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1ab11a82681eb33a66f423216cb063e7f40c6f85)
|
|
[WHAT]
hws was checked for null earlier in dce110_blank_stream, indicating hws
can be null, and should be checked whenever it is used.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 79db43611ff61280b6de58ce1305e0b2ecf675ad)
Cc: stable@vger.kernel.org
|
|
Add a protection to ensure programming are all complete prior VCPU
starting. This is a WA for an unintended VCPU running.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c29521b529fa5e225feaf709d863a636ca0cbbfa)
Cc: stable@vger.kernel.org
|
|
Simplify SDMA v4_4_2 queue reset and stop operations by:
1. Removing GET_INST(SDMA0) conversion for ring->me
2. Using the logical instance ID (ring->me) directly
3. Maintaining consistent behavior with other SDMA queue operations
This change aligns with the existing queue handling logic where
ring->me already represents the correct instance identifier.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3bab282dfe25dff7a55add432f56898505a6cc6c)
Cc: stable@vger.kernel.org
|
|
This commit makes the following improvements to SDMA engine reset handling:
1. Clarifies in the function documentation that instance_id refers to a logical ID
2. Adds conversion from logical to physical instance ID before performing reset
using GET_INST(SDMA0, instance_id) macro
3. Improves error messaging to indicate when a logical instance reset fails
4. Adds better code organization with blank lines for readability
The change ensures proper SDMA engine reset by using the correct physical
instance ID while maintaining the logical ID interface for callers.
V2: Remove harvest_config check and convert directly to physical instance (Lijo)
Suggested-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5efa6217c239ed1ceec0f0414f9b6f6927387dfc)
Cc: stable@vger.kernel.org
|
|
1. Add kicker firmwares loading for gfx11/smu13/psp13
2. Register additional MODULE_FIRMWARE entries for kicker fws
- gc_11_0_0_rlc_kicker.bin
- gc_11_0_0_imu_kicker.bin
- psp_13_0_0_sos_kicker.bin
- psp_13_0_0_ta_kicker.bin
- smu_13_0_0_kicker.bin
Signed-off-by: Frank Min <Frank.Min@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fb5ec2174d70a8989bc207d257db90ffeca3b163)
Cc: stable@vger.kernel.org
|
|
1. add kicker device list
2. add kicker device checking helper function
Signed-off-by: Frank Min <Frank.Min@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 09aa2b408f4ab689c3541d22b0968de0392ee406)
Cc: stable@vger.kernel.org
|
