| Age | Commit message (Collapse) | Author |
|---|
|
Currently, the budget for monitor ring is reduced during each ring entry
reaping and again when the end reason is HAL_MON_END_OF_PPDU, leading to
inefficient budget use. The below mentioned commit intended to decrement
the budget only for HAL_MON_END_OF_PPDU but did not remove the other
decrement. Fix this by eliminating the budget decrement for each ring entry
reaping, ensuring the driver always reaps one full PPDU worth of entries
from the monitor destination ring.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Fixes: 394a3fa7c538 ("wifi: ath12k: Optimize NAPI budget by adjusting PPDU processing")
Signed-off-by: P Praneesh <praneesh.p@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250603103542.1164713-1-praneesh.p@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
The commit 89ac53e96217 ("wifi: ath12k: Enable REO queue lookup table
feature on QCN9274") originally intended to enable the reoq_lut_support
hardware parameter flag for both QCN9274 hw1.0 and hw2.0. However,
it enabled it only for QCN9274 hw1.0.
Hence, enable REO queue lookup table feature on QCN9274 hw2.0.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250609-qcn9274-reoq-v1-1-a92c91abc9b9@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Commit a934a57a42f6 ("scripts/misc-check: check missing #include
<linux/export.h> when W=1") introduced a new check that is producing
the following warning:
drivers/net/wireless/ath/ath12k/core.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Add the missing #include to satisfy the check.
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250611-ath-unused-export-v1-5-c36819df7e7b@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Commit a934a57a42f6 ("scripts/misc-check: check missing #include
<linux/export.h> when W=1") introduced a new check that is producing
the following warnings:
drivers/net/wireless/ath/ath11k/ce.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/net/wireless/ath/ath11k/core.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/net/wireless/ath/ath11k/coredump.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/net/wireless/ath/ath11k/debug.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/net/wireless/ath/ath11k/debugfs.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/net/wireless/ath/ath11k/dp.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/net/wireless/ath/ath11k/fw.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/net/wireless/ath/ath11k/hal.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/net/wireless/ath/ath11k/pcic.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/net/wireless/ath/ath11k/qmi.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/net/wireless/ath/ath11k/trace.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Add the missing #include to satisfy the check.
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250611-ath-unused-export-v1-4-c36819df7e7b@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Commit a934a57a42f6 ("scripts/misc-check: check missing #include
<linux/export.h> when W=1") introduced a new check that is producing
the following warnings:
drivers/net/wireless/ath/ath10k/bmi.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/net/wireless/ath/ath10k/ce.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/net/wireless/ath/ath10k/core.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/net/wireless/ath/ath10k/coredump.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/net/wireless/ath/ath10k/debug.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/net/wireless/ath/ath10k/htc.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/net/wireless/ath/ath10k/htt_rx.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/net/wireless/ath/ath10k/htt_tx.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/net/wireless/ath/ath10k/mac.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/net/wireless/ath/ath10k/trace.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Add the missing #include to satisfy the check.
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250611-ath-unused-export-v1-3-c36819df7e7b@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Commit a934a57a42f6 ("scripts/misc-check: check missing #include
<linux/export.h> when W=1") introduced a new check that is producing
the following warnings:
drivers/net/wireless/ath/ath9k/common-beacon.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/net/wireless/ath/ath9k/common-debug.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/net/wireless/ath/ath9k/common-init.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/net/wireless/ath/ath9k/common-spectral.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/net/wireless/ath/ath9k/common.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/net/wireless/ath/ath9k/dynack.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/net/wireless/ath/ath9k/hw.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Add the missing #include to satisfy the check.
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20250611-ath-unused-export-v1-2-c36819df7e7b@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Commit a934a57a42f6 ("scripts/misc-check: check missing #include
<linux/export.h> when W=1") introduced a new check that is producing
the following warning:
drivers/net/wireless/ath/main.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Add the missing #include to satisfy the check.
Link: https://patch.msgid.link/20250611-ath-unused-export-v1-1-c36819df7e7b@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently, TID is not decremented before peer cleanup, during error
handling path of ath12k_dp_rx_peer_frag_setup(). This could lead to
out-of-bounds access in peer->rx_tid[].
Hence, add a decrement operation for TID, before peer cleanup to
ensures proper cleanup and prevents out-of-bounds access issues when
the RX peer frag setup fails.
Found during code review. Compile tested only.
Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250526034713.712592-1-quic_sarishar@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
ath12k_dp_rx_deliver_msdu() currently includes logic related to
monitor mode handling. This code was inherited from the ath11k driver,
where a single rx handler was used for both regular and monitor mode
packets. In ath12k, however, monitor mode packets are handled separately
via ath12k_dp_mon_rx_deliver_msdu(), which contains all the necessary
monitor-specific logic. Therefore, monitor-related checks and operations
in ath12k_dp_rx_deliver_msdu() are no longer needed. Remove this dead code
to simplify the rx path and avoid unnecessary per-packet checks.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: P Praneesh <praneesh.p@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250605054438.1855365-1-praneesh.p@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
As station, WCN7850 firmware requires pairwise key to be installed before
group key. Currently host does not care about this, so it is up to kernel
or userspace to decide which one will be installed first. In case above
requirement is not met, WCN7850 firmware's EAPOL station machine is messed
up, and finally connection fails [1].
Reorder key install for station interface in that case: this is done by
caching group key first; Later when pairwise key arrives, both can be
installed in required order.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00217-QCAHKSWPL_SILICONZ-1
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218733
Link: https://lore.kernel.org/all/AS8P190MB12051DDBD84CD88E71C40AD7873F2@AS8P190MB1205.EURP190.PROD.OUTLOOK.COM # [1]
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250523-ath12k-unicast-key-first-v1-2-f53c3880e6d8@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
WMI_KEY_PAIRWISE and WMI_KEY_GROUP are not bit fields, change
bit operation to direct assignment to avoid confusion.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00217-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250523-ath12k-unicast-key-first-v1-1-f53c3880e6d8@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
If a regulatory notification is there in the system while the hardware is
being registered, it attempts to set the new regulatory country. However,
ath12k currently boots with a default country derived from the BDF. If this
default country differs from the one provided in the notification, a race
condition can occur while updating the regulatory information back to
userspace. This potentially leads to driver having the incorrect regulatory
applied.
For example, suppose the regulatory domain for France (FR) is already
applied, and then the driver is loaded with a BDF that has the United
States (US) country programmed. When the driver finishes loading, the
regulatory domain shown in phyX still reflects the US regulatory settings.
This is incorrect, as the driver had already received a notification for
FR during hardware registration, but failed to process it properly due to
the race condition.
The race condition exists during driver initialization and hardware
registration:
- On driver load, the firmware sends BDF-based country regulatory rules,
which are stored in default_regd via ath12k_reg_handle_chan_list().
- During hardware registration, a regulatory notification is triggered
through:
ath12k_mac_hw_register()
-> ieee80211_register_hw()
-> wiphy_register()
-> wiphy_regulatory_register()
-> reg_call_notifier()
This sends a country code to the firmware, which responds with updated
regulatory rules.
- After registration, ath12k_mac_hw_register() calls ath12k_regd_update(),
which copies default_regd and passes it to the upper layers.
The race occurs between the firmware's response and the execution of
ath12k_regd_update(). If the firmware's new rules are processed before the
update call, the correct values are used. Otherwise, outdated boot-time
country settings are exposed to userspace.
To resolve this issue, introduce a completion mechanism within the hardware
group (ah). Trigger this completion whenever a regulatory change is
requested from the firmware. Then, in ath12k_regd_update(), wait for the
firmware to complete its regulatory processing before proceeding with the
update.
This ensures that during driver load, the default country is processed
first. However, before ath12k_regd_update() is called, the new regulatory
notification will have already been received by the driver. As a result, it
will wait for the firmware's regulatory processing to complete, and only
the final, correct regulatory domain will be updated to userspace.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250617-handle_user_regd_update_hints_during_insmod-v2-1-10a6a48efe81@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
With previous patch [1], ath12k_reg_update_chan_list() will be called
during reg_process_self_managed_hint().
reg_process_self_managed_hint() will hold rtnl_lock all the time.
But ath12k_reg_update_chan_list() may increase the occupation time of
rtnl_lock, because when wait flag is set, wait_for_completion_timeout()
will be called during 11d/hw scan.
Should minimize the occupation time of rtnl_lock as much as possible
to avoid interfering with rest of the system. So move the update channel
list operation to a new worker, so that wait_for_completion_timeout()
won't be called with the rtnl_lock held.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Fixes: f335295aa29c ("wifi: ath12k: avoid deadlock during regulatory update in ath12k_regd_update()") #[1]
Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com>
Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250605082528.701-1-kang.yang@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
When two split-phy devices that support overlapping frequency ranges within
the same band are grouped into an ath12k hardware (HW) setup, they share a
common wiphy instance. Consequently, the channel list (wiphy->bands[])
becomes unified across all associated radios (ar).
For reference, the devices are:
2.4 GHz + 5 GHz Low Band
5 GHz High Band + 6 GHz
The first radio probed within the 5 GHz range (say 5 GHz Low Band) updates
its sband reference (&ar->mac.sbands[NL80211_BAND_5GHZ]) within
wiphy->bands[]. However, when the second 5 GHz radio (5 GHz High Band) is
probed, it replaces the existing wiphy->bands[] entry with its own sub-band
reference. As a result, wiphy->bands[] always reflects the channel list
from the most recently probed radio in that band, restricting supported
channels to those within its specific range for upper-layer.
Fix this by updating the wiphy->bands[] to just enable the channels of
current radio when there exist a radio which already has set it.
This will make sure wiphy->bands[] holds reference of first radio which
got probed in 5 GHz band and subsequent radio just updates the channel list
in the same address space.
Since same sband memory space is shared between radios of a band, while
determining the allowed frequency range of radio, its frequency limits
(ar->freq_range.start_freq, end_freq) should be used.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250522111514.3735107-1-rameshkumar.sundaram@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
When two split-phy devices having supported frequency range in same band
(as mentioned below) are combined into an ath12k HW group, they will be
part of same wiphy and hence the channel list (wiphy->bands[]) will be
common for all of the radios (ar).
1 - 2.4 GHz + 5 GHz Low band
2 - 5 GHz High band + 6 GHz
When a scan is triggered with frequency list containing frequencies of
both 5 GHz low and 5 GHz high, mac80211 generates a single scan request
to driver with both the frequencies. This is because mac80211 splits the
scan request based on band.
ath12k checks the first frequency in the requested scan frequency list and
initiates scan to corresponding radio's(ar) firmware with all the
frequencies. Firmware rejects this scan as some frequencies in the scan
request are not supported, resulting is scan failure.
Fix this by splitting the scan request into multiples scans in driver
based on the supported frequency range of different radios in a band and
schedule scans in parallel to them.
Finally send scan completion/abort notification to mac80211 after all the
radios complete their scheduled scan.
Also, last_scan_link is not needed anymore as ath12k internally schedules
multiple scans, remove the same and use ahvif->links_map to identify
scan links when scan is cancelled.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Co-developed-by: Vignesh C <quic_vignc@quicinc.com>
Signed-off-by: Vignesh C <quic_vignc@quicinc.com>
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Mahendran P <quic_mahep@quicinc.com>
Link: https://patch.msgid.link/20250507194832.2501668-3-rameshkumar.sundaram@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
When two split-phy devices that support overlapping frequency ranges within
the same band(say 5 GHz low and 5 GHz high) are grouped into an ath12k
hardware (HW) setup, they share a common wiphy instance. Consequently, the
channel list (wiphy->bands[]) becomes unified across all associated
radios (ar).
When a scan is triggered with frequency list containing frequencies of
both 5 GHz low and 5 GHz high, mac80211 generates a single scan request
to driver with all the frequencies. This is because mac80211 splits the
scan request based on band.
ath12k checks the first frequency in the requested scan frequency list and
initiates scan to corresponding radio's(ar) firmware with all the
frequencies. Firmware rejects this scan since some of the frequencies in
the scan request are not supported, resulting in a scan failure.
To fix this ath12k driver should split the scan request into multiple
scans based on requested frequencies and schedule them to corresponding
underlying radio(s) in parallel.
Currently, ath12k driver assigns the scan link (link 15) in ahvif->links[]
for scan vdev creation. However, with parallel scan support being
introduced in the following patch, multiple radios (e.g., 5 GHz low and
5 GHz high) in the same HW group may attempt to use the same scan link
concurrently, causing conflicts where the vdev created by one radio could
be deleted and re-initialized by another.
To address this, reserve space for additional scan links for each radio in
a MLO group and allow subsequent radios to use different available scan
links (ahvif->link[15..MAX_SCAN_LINKS]) when scan link (15) is
pre-occupied.
While at it, rename ATH12K_DEFAULT_SCAN_LINK as ATH12K_FIRST_SCAN_LINK
as there is no longer only one scan link.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Mahendran P <quic_mahep@quicinc.com>
Link: https://patch.msgid.link/20250507194832.2501668-2-rameshkumar.sundaram@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
In MLO configuration, ath12k_mac_radio_start() iterates through all
the radios and makes the ar state 'ON'. Even though some bands are
not supported in certain countries, ath12k_reg_update_chan_list()
tries to update the channel list for all the active pdevs and ends
up in the warn_on for non-supported band.
To prevent this, disable the pdev when the number of channels across
all bands supported by the pdev is zero for a particular country.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Signed-off-by: Karthik M <quic_karm@quicinc.com>
Signed-off-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250506214930.3561348-1-muna.sinada@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
During beacon miss handling, ath12k driver iterates over active virtual
interfaces (vifs) and attempts to access the radio object (ar) via
arvif->deflink->ar.
However, after commit aa80f12f3bed ("wifi: ath12k: defer vdev creation for
MLO"), arvif is linked to a radio only after vdev creation, typically when
a channel is assigned or a scan is requested.
For P2P capable devices, a default P2P interface is created by
wpa_supplicant along with regular station interfaces, these serve as dummy
interfaces for P2P-capable stations, lack an associated netdev and initiate
frequent scans to discover neighbor p2p devices. When a scan is initiated
on such P2P vifs, driver selects destination radio (ar) based on scan
frequency, creates a scan vdev, and attaches arvif to the radio. Once the
scan completes or is aborted, the scan vdev is deleted, detaching arvif
from the radio and leaving arvif->ar uninitialized.
While handling beacon miss for station interfaces, P2P interface is also
encountered in the vif iteration and ath12k_mac_handle_beacon_miss_iter()
tries to dereference the uninitialized arvif->deflink->ar.
Fix this by verifying that vdev is created for the arvif before accessing
its ar during beacon miss handling and similar vif iterator callbacks.
==========================================================================
wlp6s0: detected beacon loss from AP (missed 7 beacons) - probing
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 5 UID: 0 PID: 0 Comm: swapper/5 Not tainted 6.16.0-rc1-wt-ath+ #2 PREEMPT(full)
RIP: 0010:ath12k_mac_handle_beacon_miss_iter+0xb5/0x1a0 [ath12k]
Call Trace:
__iterate_interfaces+0x11a/0x410 [mac80211]
ieee80211_iterate_active_interfaces_atomic+0x61/0x140 [mac80211]
ath12k_mac_handle_beacon_miss+0xa1/0xf0 [ath12k]
ath12k_roam_event+0x393/0x560 [ath12k]
ath12k_wmi_op_rx+0x1486/0x28c0 [ath12k]
ath12k_htc_process_trailer.isra.0+0x2fb/0x620 [ath12k]
ath12k_htc_rx_completion_handler+0x448/0x830 [ath12k]
ath12k_ce_recv_process_cb+0x549/0x9e0 [ath12k]
ath12k_ce_per_engine_service+0xbe/0xf0 [ath12k]
ath12k_pci_ce_workqueue+0x69/0x120 [ath12k]
process_one_work+0xe3a/0x1430
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Fixes: aa80f12f3bed ("wifi: ath12k: defer vdev creation for MLO")
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250618185635.750470-1-rameshkumar.sundaram@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
When operating in split mode, it is a valid usecase to have
only one core enabled in the cluster. Remove exact core count
expecatation from the driver.
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Link: https://lore.kernel.org/r/20250618181933.1253033-1-tanmay.shah@amd.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Sustained frequency when greater than or equal to 4Ghz on 64-bit devices
currently result in marking all frequencies as turbo. Address the turbo
frequency selection bug by fixing the truncation.
Fixes: a897575e79d7 ("firmware: arm_scmi: Add support for marking certain frequencies as turbo")
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Message-Id: <20250514214719.203607-1-quic_sibis@quicinc.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
clang gets a bit confused by the code in the qed_mfw_process_tlv_req and
ends up spilling registers to the stack hundreds of times. When sanitizers
are enabled, this can end up blowing the stack warning limit:
drivers/net/ethernet/qlogic/qed/qed_mng_tlv.c:1244:5: error: stack frame size (1824) exceeds limit (1280) in 'qed_mfw_process_tlv_req' [-Werror,-Wframe-larger-than]
Apparently the problem is the complexity of qed_mfw_update_tlvs()
after inlining, and marking the four main branches of that function
as noinline_for_stack makes this problem completely go away, the stack
usage goes down to 100 bytes.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Reading DPCD registers has side-effects in general. In particular
accessing registers outside of the link training register range
(0x102-0x106, 0x202-0x207, 0x200c-0x200f, 0x2216) is explicitly
forbidden by the DP v2.1 Standard, see
3.6.5.1 DPTX AUX Transaction Handling Mandates
3.6.7.4 128b/132b DP Link Layer LTTPR Link Training Mandates
Based on my tests, accessing the DPCD_REV register during the link
training of an UHBR TBT DP tunnel sink leads to link training failures.
Solve the above by using the DP_LANE0_1_STATUS (0x202) register for the
DPCD register access quirk.
Cc: <stable@vger.kernel.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250605082850.65136-2-imre.deak@intel.com
(cherry picked from commit a40c5d727b8111b5db424a1e43e14a1dcce1e77f)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
The MediaTek MT8196 Chromebook SoC features one DVFSRC regulator
with 6 voltage steps.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20250623120144.109359-5-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The MediaTek Dimensity 1200 (MT6893) features the same DVFSRC
regulators as the other currently supported SoCs, but with a
different select value: add an array describing the possible
voltages for the VCORE and VSCP regulators, and assign it to
a new compatible for this SoC.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20250623120144.109359-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The config file related to the memory windows start the numbering of
the MW from 1. The other NTB function does the same, yet the enumeration
defining the BARs of the vNTB function starts numbering the MW from 0.
Both numbering should be fine, but mixing the two is a bit confusing. The
configfs file being the interface with userspace, keep that stable and
consistently start the numbering of the MW from 1.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
[mani: commit message rewording]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250603-pci-vntb-bar-mapping-v2-2-fc685a22ad28@baylibre.com
|
|
According the function documentation of epf_ntb_init_epc_bar(), the
function should return an error code on error. However, it returns -1 when
no BAR is available i.e., when pci_epc_get_next_free_bar() fails.
Return -ENOENT instead.
Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
[mani: changed err code to -ENOENT]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250603-pci-vntb-bar-mapping-v2-1-fc685a22ad28@baylibre.com
|
|
DIV_ROUND_CLOSEST_ULL uses do_div(), which expects a 32-bit divisor.
When passing a 64-bit constant like CURVE2_MULTIPLIER, the value is
silently truncated to u32, potentially leading to incorrect results
on large divisors.
Replace DIV_ROUND_CLOSEST_ULL with DIV64_U64_ROUND_CLOSEST which correctly
handles full 64-bit division.
v2: Use DIV64_U64_ROUND_CLOSEST instead of div64_u64 macro. (Jani)
Fixes: 5947642004bf ("drm/i915/display: Add support for SNPS PHY HDMI PLL algorithm for DG2")
Reported-by: Vas Novikov <vasya.novikov@gmail.com>
Closes: https://lore.kernel.org/all/8d7c7958-9558-4c8a-a81a-e9310f2d8852@gmail.com/
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Vas Novikov <vasya.novikov@gmail.com>
Cc: stable@vger.kernel.org # v6.15+
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://lore.kernel.org/r/20250618130951.1596587-2-ankit.k.nautiyal@intel.com
(cherry picked from commit b300a175a11e6a934d728317dc39787723cc7917)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
By default, the driver relies on the default hardware defined value for the
Max Link Width (MLW) capability. But if the "num-lanes" DT property is
present, assume that the chip's default capability information is incorrect
or undesired, and use the specified value instead.
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
[mani: reworded the description and comments]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250530224035.41886-3-james.quinlan@broadcom.com
|
|
Add a macro CRYPTO_MD5_STATESIZE for the Crypto API export state
size of md5 and use that in dm-crypt instead of relying on the
size of struct md5_state (the latter is currently undergoing a
transition and may shrink).
This commit fixes a crash on 32-bit machines:
Oops: Oops: 0000 [#1] SMP
CPU: 1 UID: 0 PID: 12 Comm: kworker/u16:0 Not tainted 6.16.0-rc2+ #993 PREEMPT(full)
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020
Workqueue: kcryptd-254:0-1 kcryptd_crypt [dm_crypt]
EIP: __crypto_shash_export+0xf/0x90
Code: 4a c1 c7 40 20 a0 b4 4a c1 81 cf 0e 00 04 08 89 78 50 e9 2b ff ff ff 8d 74 26 00 55 89 e5 57 56 53 89 c3 89 d6 8b 00 8b 40 14 <8b> 50 fc f6 40 13 01 74 04 4a 2b 50 14 85 c9 74 10 89 f2 89 d8 ff
EAX: 303a3435 EBX: c3007c90 ECX: 00000000 EDX: c3007c38
ESI: c3007c38 EDI: c3007c90 EBP: c3007bfc ESP: c3007bf0
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 EFLAGS: 00010216
CR0: 80050033 CR2: 303a3431 CR3: 04fbe000 CR4: 00350e90
Call Trace:
crypto_shash_export+0x65/0xc0
crypt_iv_lmk_one+0x106/0x1a0 [dm_crypt]
Fixes: efd62c85525e ("crypto: md5-generic - Use API partial block handling")
Reported-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Milan Broz <gmazyland@gmail.com>
Closes: https://lore.kernel.org/linux-crypto/f1625ddc-e82e-4b77-80c2-dc8e45b54848@gmail.com/T/
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Add VMD Device ID Support for PTL-H/P/U processors.
Signed-off-by: George D Sworo <george.d.sworo@intel.com>
[mani: expanded PTL]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250606210230.340803-2-george.d.sworo@intel.com
|
|
The current KERN_WARNING level message for detecting absent memory
controllers is overly dramatic. The BIOS likely had valid reasons to
disable the memory controller (e.g. it isn't connected to any DIMM
slots on the motherboard for this system). So there's nothing actually
wrong that needs to be fixed.
Reduce the log level to KERN_DEBUG to eliminate the false warning.
Suggested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250618162307.1523736-2-qiuxu.zhuo@intel.com
|
|
Based on table 103 ("Host Device ID (DID0)") in [1], document which CPUs
correspond to each Raptor Lake-S device ID for better readability.
[1] https://www.intel.com/content/www/us/en/content-details/743844/13th-generation-intel-core-intel-core-14th-generation-intel-core-processor-series-1-and-series-2-and-intel-xeon-e-2400-processor-datasheet-volume-1-of-2.html
Signed-off-by: George Gaidarov <gdgaidarov+lkml@gmail.com>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250529162933.1228735-2-gdgaidarov+lkml@gmail.com
|
|
Device ID '0xa740' is shared by i7-14700, i7-14700K, and i7-14700T.
Device ID '0xa704' is shared by i5-14600, i5-14600K, and i5-14600T.
Tested locally on my i7-14700K.
Signed-off-by: George Gaidarov <gdgaidarov+lkml@gmail.com>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250529162933.1228735-1-gdgaidarov+lkml@gmail.com
|
|
Bartlett Lake-S is a derivative of Raptor Lake-S and is optimized for
IoT/Edge applications. It shares the same memory controller registers
as Raptor Lake-S. Add compute die IDs of Bartlett Lake-S and reuse the
configuration data of Raptor Lake-S for Bartlett Lake-S EDAC support.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250502013900.343430-1-qiuxu.zhuo@intel.com
|
|
The unmap write zeroes limits have been set to the stacking queue limits
by default in blk_set_stacking_limits() and blk_stack_limits(), but it
should be cleared if any underlying device does not support it.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://lore.kernel.org/20250619111806.3546162-6-yi.zhang@huaweicloud.com
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When the device supports the Write Zeroes command and the zeroing mode
is set to SD_ZERO_WS16_UNMAP or SD_ZERO_WS10_UNMAP, this means that the
device supports unmap Write Zeroes, so set the corresponding
max_hw_write_zeroes_unmap_sectors to max_write_zeroes_sectors on the
device's queue limit.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://lore.kernel.org/20250619111806.3546162-5-yi.zhang@huaweicloud.com
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Set the WZDS and DRB bits to the namespace dlfeat if the underlying
block device enables the unmap write zeroes operation, make the nvme
target device supports the unmap write zeroes command.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://lore.kernel.org/20250619111806.3546162-4-yi.zhang@huaweicloud.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When the device supports the Write Zeroes command and the DEAC bit, it
indicates that the deallocate bit in the Write Zeroes command is
supported, and the bytes read from a deallocated logical block are
zeroes. This means the device supports unmap Write Zeroes operation, so
set the max_hw_wzeroes_unmap_sectors to max_write_zeroes_sectors on the
device's queue limit.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://lore.kernel.org/20250619111806.3546162-3-yi.zhang@huaweicloud.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Target does not honour the "sync" argument when activated w/o metadata
devices, e.g. with table line:
"0 $(blockdev --getsz $data1) raid raid1 2 0 sync 2 - $data1 - $data2".
Fix this to support temporary, transient raid devices useful
for data duplication.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Switch to u64 arithmetic and use DIV_ROUND_CLOSEST_ULL() to avoid
the overflow.
buffer[i] is unsigned int and is limited by the lirc core to
IR_MAX_DURATION, which is 500000.
idata->freq is u32, which has a max value of 0xFFFFFFFF.
In the case where buffer[i] is 500000, idata->freq overflows the u32
multiplication for any values >= 8590.
0xFFFFFFFF / 500000 ~= 8589
By casting buffer[i] to u64, idata->freq can be any u32 value without
overflowing the multiplication.
0xFFFFFFFFFFFFFFFF / 500000 ~= 36893488147419 (> 4294967295)
The result of the final operation will fit back into the unsigned int
limits without any issues.
500000 * 0xFFFFFFFF / 1000000 = 0x80000000 (< 0xFFFFFFFF)
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Carrier frequency is currently unconstrained, allowing the SPI transfer
to be allocated and filled only for it to be later rejected by the SPI
controller since the frequency is too large.
Add a check to constrain the carrier frequency inside
ir_spi_set_tx_carrier().
Also, move the number of bits per pulse to a macro since it is not used
in multiple places.
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Replace the static transmit buffer with a dynamically allocated one,
removing the limit imposed on the number of pulses to transmit.
Calculate the number of pulses for each duration in the received buffer
ahead of time, while also adding up the total pulses, to be able to
allocate a buffer that perfectly fits the total number of pulses, then
populate it.
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Fix the error_reads mode - it's incompatible with corrupt_bio_byte, but
that's only enabled if corrupt_bio_byte is nonzero.
Cc: Benjamin Marzinski <bmarzins@redhat.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: dm-devel@lists.linux.dev
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Reviewed-by: Benjamin Marzinski <bmarzins@redhat.com>
Fixes: 19da6b2c9e8e ("dm-flakey: Clean up parsing messages")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Due to the semantics of iterate_devices(), the current code allows a
request-based dm table as long as it includes one request-stackable
device. It is supposed to only allow tables where there are no
non-request-stackable devices.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Fixes two minor typos in Thunderbolt driver comments:
Correct "passwd" -> "passed" in nvm.c.
Correct "boths" -> "both" in switch.c.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
The tb_dp_port_set_hops() function was incorrectly clearing
ADP_DP_CS_1_AUX_RX_HOPID_MASK twice. According to the function's
purpose, it should clear both TX and RX AUX HopID fields. Replace the
first instance with ADP_DP_CS_1_AUX_TX_HOPID_MASK to ensure proper
configuration of both AUX directions.
Fixes: 98176380cbe5 ("thunderbolt: Convert DP adapter register names to follow the USB4 spec")
Cc: stable@vger.kernel.org
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
commit 1a760d10ded37 ("thunderbolt: Fix a logic error in wake on connect")
fixated on the USB4 port sysfs wakeup file not working properly to control
policy, but it had an unintended side effect that the sysfs file controls
policy both at runtime and at suspend time. The sysfs file is supposed to
only control behavior while system is suspended.
Pass whether programming a port for runtime into usb4_switch_set_wake()
and if runtime then ignore the value in the sysfs file.
Cc: stable@vger.kernel.org
Reported-by: Alexander Kovacs <Alexander.Kovacs@amd.com>
Tested-by: Alexander Kovacs <Alexander.Kovacs@amd.com>
Fixes: 1a760d10ded37 ("thunderbolt: Fix a logic error in wake on connect")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Add jobs to run KUnit tests using tools/testing/kunit/kunit.py tool.
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Acked-by: Helen Koike <helen.fornazier@gmail.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250623085033.39680-3-vignesh.raman@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Add jobs to run dt_binding_check and dtbs_check. If warnings are seen,
exit with a non-zero error code while configuring them as warning in
the GitLab CI pipeline.
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Acked-by: Helen Koike <helen.fornazier@gmail.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250623085033.39680-2-vignesh.raman@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Add drm_panic module for bochs drm so that panic screen can be displayed
on panic.
Signed-off-by: Ryosuke Yasuoka <ryasuoka@redhat.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250613132023.106946-1-ryasuoka@redhat.com
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
|
