| Age | Commit message (Collapse) | Author |
|---|
|
The 'icc_bw_lock' mutex is introduced in commit af42269c3523
("interconnect: Fix locking for runpm vs reclaim") in order to decouple
serialization of bw aggregation from codepaths that require memory
allocation.
However commit d30f83d278a9 ("interconnect: core: Add dynamic id
allocation support") added a devm_kasprintf() call into a path protected
by the 'icc_bw_lock' which causes the following lockdep warning on
machines like the Lenovo ThinkPad X13s:
======================================================
WARNING: possible circular locking dependency detected
6.16.0-rc3 #15 Not tainted
------------------------------------------------------
(udev-worker)/342 is trying to acquire lock:
ffffb973f7ec4638 (fs_reclaim){+.+.}-{0:0}, at: __kmalloc_node_track_caller_noprof+0xa0/0x3e0
but task is already holding lock:
ffffb973f7f7f0e8 (icc_bw_lock){+.+.}-{4:4}, at: icc_node_add+0x44/0x154
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (icc_bw_lock){+.+.}-{4:4}:
icc_init+0x48/0x108
do_one_initcall+0x64/0x30c
kernel_init_freeable+0x27c/0x500
kernel_init+0x20/0x1d8
ret_from_fork+0x10/0x20
-> #0 (fs_reclaim){+.+.}-{0:0}:
__lock_acquire+0x136c/0x2114
lock_acquire+0x1c8/0x354
fs_reclaim_acquire+0x74/0xa8
__kmalloc_node_track_caller_noprof+0xa0/0x3e0
devm_kmalloc+0x54/0x124
devm_kvasprintf+0x74/0xd4
devm_kasprintf+0x58/0x80
icc_node_add+0xb4/0x154
qcom_osm_l3_probe+0x20c/0x314 [icc_osm_l3]
platform_probe+0x68/0xd8
really_probe+0xc0/0x38c
__driver_probe_device+0x7c/0x160
driver_probe_device+0x40/0x110
__driver_attach+0xfc/0x208
bus_for_each_dev+0x74/0xd0
driver_attach+0x24/0x30
bus_add_driver+0x110/0x234
driver_register+0x60/0x128
__platform_driver_register+0x24/0x30
osm_l3_driver_init+0x20/0x1000 [icc_osm_l3]
do_one_initcall+0x64/0x30c
do_init_module+0x58/0x23c
load_module+0x1df8/0x1f70
init_module_from_file+0x88/0xc4
idempotent_init_module+0x188/0x280
__arm64_sys_finit_module+0x6c/0xd8
invoke_syscall+0x48/0x110
el0_svc_common.constprop.0+0xc0/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x4c/0x158
el0t_64_sync_handler+0xc8/0xcc
el0t_64_sync+0x198/0x19c
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(icc_bw_lock);
lock(fs_reclaim);
lock(icc_bw_lock);
lock(fs_reclaim);
*** DEADLOCK ***
The icc_node_add() functions is not designed to fail, and as such it
should not do any memory allocation. In order to avoid this, add a new
helper function for the name generation to be called by drivers which
are using the new dynamic id feature.
Fixes: d30f83d278a9 ("interconnect: core: Add dynamic id allocation support")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20250625-icc-bw-lockdep-v3-1-2b8f8b8987c4@gmail.com
Co-developed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250627075854.26943-1-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The Dynamic Inhibit Context Switch is an optimization aimed at reducing
the amount of time the HW is stuck waiting on an unsatisfied semaphore.
When this optimization is enabled, the GuC will dynamically modify the
CTX_CTRL_INHIBIT_SYN_CTX_SWITCH in the CTX_CONTEXT_CONTROL register of
LRCs to enable immediate switching out on an unsatisfied semaphore wait
when multiple contexts are competing for time on the same engine.
This feature is available on recent HW from GuC 70.40.1 onwards and it
is enabled via a per-VF feature opt-in.
v2: rebase
v3: switch to using guc_buf_cache instead of dedicated alloc
v4: add helper to check for feature availability (Michal), don't enable
if multi-lrc is possible.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Julia Filipchuk <julia.filipchuk@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://lore.kernel.org/r/20250625205405.1653212-4-daniele.ceraolospurio@intel.com
|
|
On newer HW (Xe2 onwards + PVC) it is possible to get extra information
when a CAT error occurs, specifically a dword reporting the error type.
To enable this extra reporting, we need to opt-in with the GuC, which is
done via a specific per-VF feature opt-in H2G.
On platforms where the HW does not support the extra reporting, the GuC
will set the type to 0xdeadbeef, so we can keep the code simple and
opt-in to the feature on every platform and then just discard the data
if it is invalid.
Note that on native/PF we're guaranteed that the opt in is available
because we don't support any GuC old enough to not have it, but if we're
a VF we might be running on a non-XE PF with an older GuC, so we need to
handle that case. We can re-use the invalid type above to handle this
scenario the same way as if the feature was not supported in HW.
Given that this patch is the first user of the guc_buf_cache on native
and VF, it also extends that feature to non-PF use-cases.
v2: simpler print for the error type (John), rebase
v3: use guc_buf_cache instead of new alloc, simpler doc (Michal)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> #v1
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://lore.kernel.org/r/20250625205405.1653212-3-daniele.ceraolospurio@intel.com
|
|
The __packed attribute introduces potential unaligned memory accesses
and endianness portability issues. Instead of relying on compiler-specific
packing, it's much better to explicitly fill structure gaps using padding
fields, ensuring natural alignment.
Since all previously __packed structures already enforce proper alignment
through manual padding, the __packed qualifiers are unnecessary and can be
safely removed.
Signed-off-by: Yi Sun <yi.sun@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Link: https://lore.kernel.org/r/20250404053614.3096769-1-yi.sun@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Reuse reset-simple driver for the Sophgo CV1800B reset generator.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20250617070144.1149926-3-inochiama@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The auxiliary device creation of this driver is simple enough to
use the available auxiliary device creation helper.
Use it and remove some boilerplate code.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20250611-rst-mpfs-aux-v1-1-c86534b473c3@baylibre.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Fix trivial typo in the Kconfig entry for RESET_TH1520.
Fixes: 4a65326311ab ("reset: thead: Add TH1520 reset controller driver")
Signed-off-by: Drew Fustini <drew@pdp7.com>
Link: https://lore.kernel.org/r/20250601181000.166088-1-drew@pdp7.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Pull block fixes from Jens Axboe:
- Fixes for ublk:
- fix C++ narrowing warnings in the uapi header
- update/improve UBLK_F_SUPPORT_ZERO_COPY comment in uapi header
- fix for the ublk ->queue_rqs() implementation, limiting a batch
to just the specific task AND ring
- ublk_get_data() error handling fix
- sanity check more arguments in ublk_ctrl_add_dev()
- selftest addition
- NVMe pull request via Christoph:
- reset delayed remove_work after reconnect
- fix atomic write size validation
- Fix for a warning introduced in bdev_count_inflight_rw() in this
merge window
* tag 'block-6.16-20250626' of git://git.kernel.dk/linux:
block: fix false warning in bdev_count_inflight_rw()
ublk: sanity check add_dev input for underflow
nvme: fix atomic write size validation
nvme: refactor the atomic write unit detection
nvme: reset delayed remove_work after reconnect
ublk: setup ublk_io correctly in case of ublk_get_data() failure
ublk: update UBLK_F_SUPPORT_ZERO_COPY comment in UAPI header
ublk: fix narrowing warnings in UAPI header
selftests: ublk: don't take same backing file for more than one ublk devices
ublk: build batch from IOs in same io_ring_ctx and io task
|
|
Add support for the resets on Canaan Kendryte K230 SoC. The driver
support CPU0, CPU1, L2 cache flush, hardware auto clear and software
clear resets.
Tested-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Link: https://lore.kernel.org/r/20250613-k230-reset-v4-2-e5266d2be440@pigmoral.tech
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
No driver uses it now, remove the core code.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/7-v2-68a2e1ba507c+1fb-iommu_rm_ops_pgsize_jgg@nvidia.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
This driver just uses a constant, put it in domain_alloc_paging and use
the domain's value instead of ops during finalise.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/0-v1-662aad101e51+45-iommu_rm_ops_pgsize_msm_jgg@nvidia.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Niklas Cassel:
- Use the correct DMI identifier for ASUSPRO-D840SA LPM quirk such that
the quirk actually gets applied (me)
* tag 'ata-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: ahci: Use correct DMI identifier for ASUSPRO-D840SA LPM quirk
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Fix incorrectly dropped dereferencing of the stack nth entry
introduced with a previous KASAN false positive fix
- Use a proper memdup_array_user() helper to prevent overflow in a
protected key size calculation
* tag 's390-6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/ptrace: Fix pointer dereferencing in regs_get_kernel_stack_nth()
s390/pkey: Prevent overflow in size calculation for memdup_user()
|
|
Fix misspelling reported by codespell.
Signed-off-by: Sumanth Gavini <sumanth.gavini@yahoo.com>
Link: https://patch.msgid.link/20250522205701.393612-1-sumanth.gavini@yahoo.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Fix "trasmitting" to "transmitting"
Signed-off-by: Sumanth Gavini <sumanth.gavini@yahoo.com>
Link: https://patch.msgid.link/20250521055411.288724-1-sumanth.gavini@yahoo.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Fix "busses" to "buses"
Fix "Measurments" to "Measurements"
Signed-off-by: Sumanth Gavini <sumanth.gavini@yahoo.com>
Link: https://patch.msgid.link/20250521053323.284845-1-sumanth.gavini@yahoo.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Only set PMI fields if the screen_info's Vesa PM segment has been
set. Vesa PMI is the power-management interface. It also provides
means to set the color palette. The interface is optional, so not
all VESA graphics cards support it. Print vesafb's warning [1] if
the hardware palette cannot be set at all.
If unsupported the field PrimaryPalette in struct vesadrm.pmi is
NULL, which results in a segmentation fault. Happens with qemu's
Cirrus emulation.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 814d270b31d2 ("drm/sysfb: vesadrm: Add gamma correction")
Link: https://elixir.bootlin.com/linux/v6.15/source/drivers/video/fbdev/vesafb.c#L375 # 1
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250617140944.142392-1-tzimmermann@suse.de
|
|
Move big-endian support from drm_fb_xrgb8888_to_rgb565() into the new
helper drm_xrgb8888_to_rgb565be(). The functionality is required for
displays with big-endian byte order. Update all callers.
With the change applied, drm_fb_xrgb8888_to_rgb565() has the same
signature as the other conversion functions, which is required for
further updates to drm_fb_blit(). Also makes the format-conversion
helper available to panic handlers, if necessary.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250625114911.1121301-1-tzimmermann@suse.de
|
|
mc_subled used for multi_index needs well defined array indexes,
to guarantee the desired result, use reg for that.
If devicetree child nodes is processed in random or reverse order
you may end up with multi_index "blue green red" instead of the expected
"red green blue".
If user space apps uses multi_index to deduce how to control the leds
they would most likely be broken without this patch if devicetree
processing is reversed (which it appears to be).
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts has reg set
but I don't see how it can have worked without this change.
If reg is not set, an error is returned,
If reg is out of range, an error is returned.
reg within led child nodes starts with 0, to map to the iout in each bank.
Signed-off-by: Johan Adolfsson <johan.adolfsson@axis.com>
Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Link: https://lore.kernel.org/r/20250617-led-fix-v7-1-cdbe8efc88fa@axis.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add a function for dumping the entries of a specific flip queue.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250624170049.27284-9-ville.syrjala@linux.intel.com
|
|
Implement the driver side of Wa_18034343758, which is supposed to
prevent the DSB and DMC from accessing registers in parallel, and
thus potentially corrupting the registers due to a hardware issue
(which should be fixed in PTL-B0).
The w/a sequence goes as follows:
DMC starts the DSB
| \
DMC halts itself | DSB waits a while for DMC to have time to halt
. | DSB executes normally
. | DSB unhalts the DMC at the very end
. /
DMC resumes execution
v2: PTL-B0+ firmware no longer has the w/a since the hw got fixed
v3: Do the w/a on all PTL for now since we only have the A0 firmware
binaries which issues the halt instructions unconditionally
v4: PTL DMC binaries do in fact have the A0 vs. B0 split, so skip
the w/a on PTL-B0+
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250624170049.27284-7-ville.syrjala@linux.intel.com
|
|
Support commits via the flip queue (as opposed to DSB or MMIO).
As it's somewhat unknown if we can actually use it is currently
gated behind the new use_flipq modparam, which defaults to disabled.
The implementation has a bunch of limitations that would need
real though to solve:
- disabled when PSR is used
- disabled when VRR is used
- color management updates not performed via the flip queue
v2: Don't use flip queue if there is no dmc
v3: Use intel_flipq_supported()
v3: Configure PKG_C_LATENCY appropriately
Ignore INT_VECTOR if there is a real PIPEDMC interrupt
(nothing in the hw appears to clear INT_VECTOR)
v4: Leave added_wake_time=0 when flip queue isn't used, to
avoid needleslly increasing pkg_c_latency on lnl/ptl due
to Wa_22020432604. This is a bit racy though...
Use IS_DISPLAY_VER()
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250624170049.27284-6-ville.syrjala@linux.intel.com
|
|
Provide the lower level code for PIPEDMC based flip queue.
We'll use the so called semi-full flip queue mode where the
PIPEDMC will start the provided DSB on a scanline a little
ahead of the vblank. We need to program the triggering scanline
early enough so that the DSB has enough time to complete writing
all the double buffered registers before they get latched (at
start of vblank).
The firmware implements several queues:
- 3 "plane queues" which execute a single DSB per entry
- 1 "general queue" which can apparently execute 2 DSBs per entry
- 1 vestigial "fast queue" that replaced the "simple flip queue"
on ADL+, but this isn't supposed to be used due to issues.
But we only need a single plane queue really, and we won't actually
use it as a real queue because we don't allow queueing multiple commits
ahead of time. So the whole thing is perhaps useless. I suppose
there migth be some power saving benefits if we would get the flip
scheduled by userspace early and then could keep some hardware powered
off a bit longer until the DMC kicks off the flipq programming. But that
is pure speculation at this time and needs to be proven.
The code to hook up the flip queue into the actual atomic commit
path will follow later.
TODO: need to think how to do the "wait for DMC firmware load" nicely
need to think about VRR and PSR
etc.
v2: Don't write DMC_FQ_W2_PTS_CFG_SEL on pre-lnl
Don't oops at flipq init if there is no dmc
v3: Adapt to PTL+ flipq changes (different queue entry
layout, different trigger event, need VRR TG)
Use the actual CDCLK frequency
Ask the DSB code how long things are expected to take
v3: Adjust the cdclk rounding (docs are 100% vague, Windows
rounds like this)
Initialize some undocumented magic DMC variables on PTL
v4: Use PIPEDMC_FQ_STATUS for busy check (the busy bit in
PIPEDMC_FQ_CTRL is apparently gone on LNL+)
Based the preempt timeout on the max exec time
Preempt before disabling the flip queue
Order the PIPEDMC_SCANLINECMP* writes a bit more carefully
Fix some typos
v5: Try to deal with some clang-20 div-by-zero false positive (Nathan)
Add some docs (Jani)
Cc: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
epr
Link: https://patchwork.freedesktop.org/patch/msgid/20250624170049.27284-5-ville.syrjala@linux.intel.com
|
|
Add the register definitions for a bunch of flip queue related
PIPEDMC registers.
v2: The layout of flip queue entries changed on PTL
Bump the DMC_FQ_W2_PTS_CFG_SEL bitfields sizes (Uma)
Reduce the scanlines to 21 bits for now (Uma)
v3: Also define some undocumented DMC variables we need on PTL
v3: Drop PIPEDMC_FQ_CTRL_BUSY as it seems to no longer exist
on LNL+
Fix up some typos
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250624170049.27284-4-ville.syrjala@linux.intel.com
|
|
The current PKG_C_LATENCY stuff looks busted in several ways:
- doesn't account for multiple pipes from different commits
correctly
- WM_LINETIME is in units of 0.125usec, PKG_C_LATENCY wants
units on 1 usec
- weird VRR state stuff being checked
- use of pointless RMW
Fix it all up. Note that it's still a bit unclear how all this
works, especially how the added_wake_time ties into the flipq
triggers in DMC, and how we need to sequence updates to
PKG_C_LATENCY when enabling/disabling pipes/etc. We may also
need to think what to about the WM1+ disabling and the related
PSR chicken bits when we can use PKG_C_LATENCY for early wake...
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250624170049.27284-3-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
|
|
AFAIK PKG_C_LATENCY.added_wake_time only matters for flip queue.
As long as we're not using that there's no point in adding any
extra wake time.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250624170049.27284-2-ville.syrjala@linux.intel.com
|
|
Commit 77ba0b856225 ("drm/i915/dsi: convert vlv_dsi.[ch] to struct
intel_display") added a to_intel_display(connector) call to
vlv_dphy_param_init() but when vlv_dphy_param_init() gets called
the connector object has not been initialized yet, so this leads
to a NULL pointer deref:
BUG: kernel NULL pointer dereference, address: 000000000000000c
...
Hardware name: ASUSTeK COMPUTER INC. T100TA/T100TA, BIOS T100TA.314 08/13/2015
RIP: 0010:vlv_dsi_init+0x4e6/0x1600 [i915]
...
Call Trace:
<TASK>
? intel_step_name+0x4be8/0x5c30 [i915]
intel_setup_outputs+0x2d6/0xbd0 [i915]
intel_display_driver_probe_nogem+0x13f/0x220 [i915]
i915_driver_probe+0x3d9/0xaf0 [i915]
Use to_intel_display(&intel_dsi->base) instead to fix this.
Fixes: 77ba0b856225 ("drm/i915/dsi: convert vlv_dsi.[ch] to struct intel_display")
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250626143317.101706-1-hansg@kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Since 'scnprintf()' returns the number of characters emitted (not
including the trailing '\0'), use that return value instead of the
subsequent calls to 'strlen()' where appropriate. Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Merge series from Bence Csókás <csokas.bence@prolan.hu>:
The probe function of the atmel-quadspi driver got quite convoluted,
especially since the addition of SAMA7G5 support, that was forward-ported
from an older vendor kernel. To alleivate this - and similar problems in
the future - an effort was made to migrate as many functions as possible,
to their devm_ managed counterparts. Patch 1/2 adds the new
`devm_dma_request_chan()` function. Patch 2/2 then uses this APIs to
simplify the probe() function.
|
|
Drop the custom MHZ macro and replace it with HZ_PER_MHZ.
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20250527-samsung-dsim-v1-2-5be520d84fbb@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Turn the open-coded goto-again construct into a while loop, to make
samsung_dsim_transfer_start() a bit shorter and easier to read.
Hold the spinlock when looping back around and avoid the duplicated
list_empty() check.
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20250527-samsung-dsim-v1-1-5be520d84fbb@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The local variable first_requeue is not needed since it is always equal
to dm_io_flagged(io, DM_IO_WAS_SPLIT). Call __dm_io_complete() passing
this value directly and remove first_requeue.
Also declare dm_io_complete() as inline to make sure it is inlined in
its single call site, thus avoiding the cost of a function call.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
The return statement at the end of dm_zone_endio() is not needed.
Remove it.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
irq_domain_create_simple() takes fwnode as the first argument. It can be
extracted from the struct device using dev_fwnode() helper instead of
using of_node with of_fwnode_handle(). So use the dev_fwnode() helper.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
[wsa: proper commit header]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
It already depends on X86_32, but that's also set for ARCH=um.
Recent changes made UML no longer have IO port access since
it's not needed, but this driver uses it. Build it only for
HAS_IOPORT. This is pretty much the same as depending on X86,
but on the off-chance that HAS_IOPORT will ever be optional
on x86 HAS_IOPORT is the real prerequisite.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Since driver core provides a generic device_match_acpi_handle()
we may replace the custom code with it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
When the panic handler is called, configure the psr to send the full
framebuffer to the monitor, otherwise the panic screen is only
partially visible.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250624091501.257661-12-jfalempe@redhat.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
On Alder Lake and later, it's not possible to disable tiling when DPT
is enabled.
So this commit implements 4-Tiling support, to still be able to draw
the panic screen.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250624091501.257661-11-jfalempe@redhat.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
On Alder Lake and later, it's not possible to disable tiling when DPT
is enabled.
So this commit implements Y-Tiling support, to still be able to draw
the panic screen.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250624091501.257661-10-jfalempe@redhat.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
This adds drm_panic support for a wide range of Intel GPU. I've
tested it only on 4 laptops, Haswell (with 128MB of eDRAM),
Comet Lake, Raptor Lake, and Lunar Lake.
For hardware using DPT, it's not possible to disable tiling, as you
will need to reconfigure the way the GPU is accessing the
framebuffer, so this will be handled by the following patches.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250624091501.257661-9-jfalempe@redhat.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
Implement both functions for i915 and xe, they prepare the work for
drm_panic support.
They both use kmap_try_from_panic(), and map one page at a time, to
write the panic screen on the framebuffer.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250624091501.257661-8-jfalempe@redhat.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
Encapsulate the struct intel_framebuffer into an xe_framebuffer
or i915_framebuffer, and allow to add specific fields for each
variant for the panic use-case.
This is particularly needed to have a struct xe_res_cursor available
to support drm panic on discrete GPU.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250624091501.257661-7-jfalempe@redhat.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
If the ttm bo is backed by pages, then it's possible to safely kmap
one page at a time, using kmap_try_from_panic().
Unfortunately there is no way to do the same with ioremap, so it
only supports the kmap case.
This is needed for proper drm_panic support with xe driver.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250624091501.257661-6-jfalempe@redhat.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
drm_panic draws in linear framebuffer, so it's easier to re-use the
current framebuffer, and disable tiling in the panic handler, to show
the panic screen.
This assumes that the alignment restriction is always smaller in
linear than in tiled.
It also assumes that the linear framebuffer size is always smaller
than the tiled.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250624091501.257661-5-jfalempe@redhat.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
drm_panic draws in linear framebuffer, so it's easier to re-use the
current framebuffer, and disable tiling in the panic handler, to show
the panic screen.
This assumes that the alignment restriction is always smaller in
linear than in tiled.
It also assumes that the linear framebuffer size is always smaller
than the tiled.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250624091501.257661-4-jfalempe@redhat.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
The vaddr of the fbdev framebuffer is private to the struct
intel_fbdev, so this function is needed to access it for drm_panic.
Also the struct i915_vma is different between i915 and xe, so it
requires a few functions to access fbdev->vma->iomap.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250624091501.257661-3-jfalempe@redhat.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
Correct spelling as flagged by codespell.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The empty panel_dpi struct was only ever used as a discriminant, but
it's kind of a hack, and with the reworks done in the previous patches,
we shouldn't need it anymore.
Let's get rid of it.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Colibri iMX6
Link: https://lore.kernel.org/r/20250626-drm-panel-simple-fixes-v2-5-5afcaa608bdc@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Commit de04bb0089a9 ("drm/panel/panel-simple: Use the new allocation in
place of devm_kzalloc()") moved the call to drm_panel_init into the
devm_drm_panel_alloc(), which needs a connector type to initialize
properly.
In the panel-dpi compatible case, the passed panel_desc structure is an
empty one used as a discriminant, and the connector type it contains
isn't actually initialized.
It is initialized through a call to panel_dpi_probe() later in the
function, which used to be before the call to drm_panel_init() that got
merged into devm_drm_panel_alloc().
So, we do need a proper panel_desc pointer before the call to
devm_drm_panel_alloc() now. All cases associate their panel_desc with
the panel compatible and use of_device_get_match_data, except for the
panel-dpi compatible.
In that case, we're expected to call panel_dpi_probe, which will
allocate and initialize the panel_desc for us.
Let's create such a helper function that would be called first in the
driver and will lookup the desc by compatible, or allocate one if
relevant.
Reported-by: Francesco Dolcini <francesco@dolcini.it>
Closes: https://lore.kernel.org/all/20250612081834.GA248237@francesco-nb/
Fixes: de04bb0089a9 ("drm/panel/panel-simple: Use the new allocation in place of devm_kzalloc()")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Colibri iMX6
Link: https://lore.kernel.org/r/20250626-drm-panel-simple-fixes-v2-4-5afcaa608bdc@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
In order to fix the regession introduced by commit de04bb0089a9
("drm/panel/panel-simple: Use the new allocation in place of
devm_kzalloc()"), we need to move the panel_desc lookup into the common
panel_simple_probe() function.
There's two callers for that function, the probe implementations of the
platform and MIPI-DSI drivers panel-simple implements.
The MIPI-DSI driver's probe will need to access the current panel_desc
to initialize properly, which won't be possible anymore if we make that
lookup in panel_simple_probe().
However, we can make panel_simple_probe() return the initialized
panel_simple structure it allocated, which will contain a pointer to the
associated panel_desc in its desc field.
This doesn't fix de04bb0089a9 ("drm/panel/panel-simple: Use the new
allocation in place of devm_kzalloc()") still, but makes progress
towards that goal.
Fixes: de04bb0089a9 ("drm/panel/panel-simple: Use the new allocation in place of devm_kzalloc()")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Colibri iMX6
Link: https://lore.kernel.org/r/20250626-drm-panel-simple-fixes-v2-3-5afcaa608bdc@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
