| Age | Commit message (Collapse) | Author |
|---|
|
It's a common pattern in drivers to free the control handler's resources
and then return the handler's error code on drivers' error handling paths.
Alas, the v4l2_ctrl_handler_free() function also zeroes the error field,
effectively indicating successful return to the caller.
There's no apparent need to touch the error field while releasing the
control handler's resources and cleaning up stale pointers. Not touching
the handler's error field is a more certain way to address this problem
than changing all the users, in which case the pattern would be likely to
re-emerge in new drivers.
Do just that, don't touch the control handler's error field in
v4l2_ctrl_handler_free().
Fixes: 0996517cf8ea ("V4L/DVB: v4l2: Add new control handling framework")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Support two additional frequencies for the ov08x40 sensor using 2 lanes
Signed-off-by: Jason Chen <jason.z.chen@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Replace storage of the active format in the cio2_queue structure with
usage of V4L2 subdev active state. This simplifies locking in the
driver, and drops usage of the deprecated subdev .open() internal
operation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Sakari Ailus: keep fmt_default non-static to keep clang happy.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The OV5670 is found on Dell 7212 tablets paired with an IPU3 ISP
and needs to be connected by the ipu-bridge. Add it to the list
of supported devices.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The Dell 7212 Rugged Extreme Tablet pairs an OV5670 sensor with the
Intel IPU3 ISP. The sensor is powered by a TPS68470 PMIC, and so we
need some board data to describe how to configure the GPIOs and
regulators to run the sensor.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The OV5670 is found on a Dell 7212, coupled to Intel's CIO2 CSI-2
receiver. The ACPI tables don't describe the connection properly and
so this is one of the sensors that needs to wait for the ipu-bridge
to set up the graph with software nodes. Defer probe if an endpoint
isn't found to allow time for that.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
reset_gpio needs to be an output and set to GPIOD_OUT_LOW, to ensure
lt6911uxe is in reset state during probe.
This issue was found on the onboard lt6911uxe, where the reset_pin was
not reset, causing the lt6911uxe to fail to probe.
Fixes: e49563c3be09d4 ("media: i2c: add lt6911uxe hdmi bridge driver")
Cc: stable@vger.kernel.org
Signed-off-by: Dongcheng Yan <dongcheng.yan@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Getting / Setting the frame interval using the V4L2 subdev pad ops
get_frame_interval/set_frame_interval causes a deadlock, as the
subdev state is locked in the [1] but also in the driver itself.
In [2] it's described that the caller is responsible to acquire and
release the lock in this case. Therefore, acquiring the lock in the
driver is wrong.
Remove the lock acquisitions/releases from mt9m114_ifp_get_frame_interval()
and mt9m114_ifp_set_frame_interval().
[1] drivers/media/v4l2-core/v4l2-subdev.c - line 1129
[2] Documentation/driver-api/media/v4l2-subdev.rst
Fixes: 24d756e914fc ("media: i2c: Add driver for onsemi MT9M114 camera sensor")
Cc: stable@vger.kernel.org
Signed-off-by: Mathis Foerst <mathis.foerst@mt.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The function mt9m114_configure writes the configuration registers of both,
the pixel array (pa) and the image flow processor (ifp).
This is undesirable if only the config of the pa should be changed without
affecting the ifp.
Factor out the function mt9m114_configure_pa() that just writes the
pa-configuration.
Signed-off-by: Mathis Foerst <mathis.foerst@mt.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The MT9M114 sensor has an internal PLL that generates the required SYSCLK
from EXTCLK. It also has the option to bypass the PLL and use EXTCLK
directly as SYSCLK.
The current driver implementation uses a hardcoded PLL configuration that
requires a specific EXTCLK frequency. Depending on the available clocks,
it can be desirable to use a different PLL configuration or to bypass it.
The link-frequency of the output bus (Parallel or MIPI-CSI) is configured
in the device tree.
Check if EXTCLK can be used as SYSCLK to achieve this link-frequency. If
yes, bypass the PLL.
Otherwise, (as before) check if EXTCLK and the default PLL configuration
provide the required SYSCLK to achieve the link-frequency. If yes, use the
PLL. If no, throw an error.
Signed-off-by: Mathis Foerst <mathis.foerst@mt.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Instead rely on the rate set on the clock (using assigned-clock-rates
etc.)
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Calculate PLL parameters based on clock frequency and link frequency.
Acked-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Move clock frequency related parameters out of the constant register
sequences, such that the hard coded external clock frequency can be
replaced by a variable in the upcoming patches.
Acked-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Reorder imx214_parse_fwnode call to reduce goto paths in upcoming
patches.
No functional change intended.
Acked-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Request the sensor clock without specifying a name so that the driver
behaves as described in the imx415 bindings.
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Reviewed-by: Jai Luthra <jai.luthra@ideasonboard.com>
Reviewed-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Add the missing link-frequency to the ipu_supported_sensors[] array's
Galaxy Core GC0310 entry.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
When operating a pipeline with a missing V4L2_CID_LINK_FREQ control this
two line warning is printed each time the pipeline is started. Reduce
this excessive logging by only warning once for the missing control.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The driver is not using gpio_chip::of_xlate() callback and hence
the of_gpio_n_cells assignment is unused. Drop it.
With that done, remove unneeded OF dependency and extend compile
test coverage.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Julien Massot <julien.massot@collabora.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The sysfs attributes are registered early, but the driver does not know
whether they are needed or not at that moment.
For the CMB attributes, commit e917a849c3fc ("nvme-pci: refresh visible
attrs for cmb attributes") solved this problem by
calling nvme_update_attrs after mapping the CMB. However the issue
persists for the HMB attributes. To solve the problem, moved the call to
nvme_update_attrs after nvme_setup_host_mem, which sets up the HMB.
Fixes: e917a849c3fc ("nvme-pci: refresh visible attrs for cmb attributes")
Fixes: 86adbf0cdb9e ("nvme: simplify transport specific device attribute handling")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
If nvmet receives commands with metadata there is a continuous memory
leak of kmalloc-128 slab or more precisely bio->bi_integrity.
Since commit bf4c89fc8797 ("block: don't call bio_uninit from bio_endio")
each user of bio_init has to use bio_uninit as well. Otherwise the bio
integrity is not getting free. Nvmet uses bio_init for inline bios.
Uninit the inline bio to complete deallocation of integrity in bio.
Fixes: bf4c89fc8797 ("block: don't call bio_uninit from bio_endio")
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The blktests nvme/058 manifests an issue where the NVMe subsystem
kobject entry remains stale in sysfs, causing a failure during
subsequent NVMe module reloads[1]. Specifically, when attempting to
register a new NVMe subsystem, the driver encounters a kobejct name
collision because a stale kobject still exists. Though, please note
that nvme/058 doesn't report any failure and test case passes and
it's only during subsequent NVMe module reloads, the stale nvme sub-
system kobject entry in sysfs causes the observed symptom[1].
This issue stems from an imbalance in the get/put usage of the namespace
head (nshead) reference counter. The nshead holds a reference to the
associated NVMe subsystem. If the nshead reference is not properly
released, it prevents the cleanup of the subsystem's kobject, leaving
nvme subsystem stale entry behind in sysfs.
During the failure case, the last namespace path referencing a nshead
is removed, but the nshead reference was not released. This occurs
because the release logic currently only puts the nshead reference
when its state is LIVE. However, in configurations where ANA (Asymmetric
Namespace Access) is enabled, a namespace may be associated with an ANA
state that is neither optimized nor non-optimized. In this case, the
nshead may never transition to LIVE, and the corresponding nshead
reference is then never dropped. In fact nvme/058 associates some of
nvme namespaces to an inaccessible ANA state and with that nshead is
created but it's state is not transitioned to LIVE. So the current
logic would then causes nshead reference to be leaked for non-LIVE
states.
Another scenario, during namespace allocation, the driver first
allocates a nshead and then issues an Identify Namespace command. If
this command fails — which can happen in tests like nvme/058 that
rapidly enables and disables namespaces — we must release the reference
to the newly allocated nshead. However this reference release is
currently missing in the failure, causing a nshead reference leak.
To fix this, we now unconditionally release the nshead reference when
the last nvme path referencing to the nshead is removed, regardless of
the head’s state. Also during identify namespace failure case we now
properly release the nshead reference. So this ensures proper cleanup
of the nshead, and consequently, the NVMe subsystem and its associated
kobject.
This change prevents stale kobject entries from lingering in sysfs and
eliminates the module reload failures observed just after running
nvme/058.
[1] https://lore.kernel.org/all/CAHj4cs8fOBS-eSjsd5LUBzy7faKXJtgLkCN+mDy_-ezCLLLq+Q@mail.gmail.com/
Reported-by: yi.zhang@redhat.com
Closes: https://lore.kernel.org/all/CAHj4cs8fOBS-eSjsd5LUBzy7faKXJtgLkCN+mDy_-ezCLLLq+Q@mail.gmail.com/
Fixes: 62188639ec16 ("nvme-multipath: introduce delayed removal of the multipath head node")
Tested-by: yi.zhang@redhat.com
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Fix an error in nvme_log_err_passthru() where cdw14 was incorrectly
printed twice instead of cdw15. This fix ensures accurate logging of
the full passthrough command payload.
Fixes: 9f079dda1433 ("nvme: allow passthru cmd error logging")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
We need the staging fix in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 77ba0b856225 ("drm/i915/dsi: convert vlv_dsi.[ch] to struct
intel_display") added a to_intel_display(connector) call to
vlv_dphy_param_init() but when vlv_dphy_param_init() gets called
the connector object has not been initialized yet, so this leads
to a NULL pointer deref:
BUG: kernel NULL pointer dereference, address: 000000000000000c
...
Hardware name: ASUSTeK COMPUTER INC. T100TA/T100TA, BIOS T100TA.314 08/13/2015
RIP: 0010:vlv_dsi_init+0x4e6/0x1600 [i915]
...
Call Trace:
<TASK>
? intel_step_name+0x4be8/0x5c30 [i915]
intel_setup_outputs+0x2d6/0xbd0 [i915]
intel_display_driver_probe_nogem+0x13f/0x220 [i915]
i915_driver_probe+0x3d9/0xaf0 [i915]
Use to_intel_display(&intel_dsi->base) instead to fix this.
Fixes: 77ba0b856225 ("drm/i915/dsi: convert vlv_dsi.[ch] to struct intel_display")
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250626143317.101706-1-hansg@kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 0dc6bfb50a5d0759e726cd36a3d3b7529fd2a627)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
There was an error pointer vs NULL bug in __igt_breadcrumbs_smoketest().
The __mock_request_alloc() function implements the
smoketest->request_alloc() function pointer. It was supposed to return
error pointers, but it propogates the NULL return from mock_request()
so in the event of a failure, it would lead to a NULL pointer
dereference.
To fix this, change the mock_request() function to return error pointers
and update all the callers to expect that.
Fixes: 52c0fdb25c7c ("drm/i915: Replace global breadcrumbs with per-context interrupt tracking")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/685c1417.050a0220.696f5.5c05@mx.google.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 778fa8ad5f0f23397d045c7ebca048ce8def1c43)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
The pcf50633 was used as part of the OpenMoko devices but the support
for its main chip was recently removed in: commit 61b7f8920b17 ("ARM:
s3c: remove all s3c24xx support")
Remove the input driver.
This was originally posted as a set of pcf50633 removals in March,
and is the only major component that hasn't been picked up.
https://lore.kernel.org/all/20250311014959.743322-1-linux@treblig.org/
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250629212820.319584-1-linux@treblig.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The number of external channels is assumed to be a multiple of 10,
but this is not the case for IQS7222D. As a result, some CRx pins
are wrongly prevented from being assigned to some channels.
Address this problem by explicitly defining the number of external
channels for cases in which the number of external channels is not
equal to the total number of available channels.
Fixes: dd24e202ac72 ("Input: iqs7222 - add support for Azoteq IQS7222D")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/aGHVf6HkyFZrzTPy@nixie71
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
There are designs incorporating Goodix touch controller that do not
connect interrupt pin, for example Raspberry Pi. To support such systems
use polling mode for the input device when I2C client does not have
interrupt assigned to it.
Signed-off-by: Joseph Guo <qijian.guo@nxp.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250522020418.1963422-1-qijian.guo@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Move the definition of the function ata_eh_set_lpm() to avoid its
unnecessary forward declaration and rename the function to
ata_eh_link_set_lpm() to clarify that it acts on a link.
No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
Despite its name, the mobile_lpm_policy module parameter defines the
default LPM policy to use for an AHCI adapter for all chipsets,
including desktop and server chipsets. Clarify this point in the
parameter description.
No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
Improve the description of the possible default SATA link power
management policies and add the missing description for policy 5.
No functional changes.
Fixes: a5ec5a7bfd1f ("ata: ahci: Support state with min power but Partial low power state")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
Change the function ata_scsi_offline_dev() to return a bool and change
this function kdoc comment to have the correct mention of its call site.
No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
The ATA device flag ATA_DFLAG_ZAC is used to indicate if a devie is a
host managed or host aware zoned device. However, this flag is not used
in the hot path and only used during device scanning/revalidation and
for inquiry and sense SCSI command translation.
Save one bit from struct ata_device flags field by replacing this flag
with the internal helper function ata_dev_is_zac(). This function
returns true if the device class is ATA_DEV_ZAC (host managed ZAC device
case) or if its identify data reports it supports the zoned command set
(host aware ZAC device case).
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
The GitLab runner tags are case sensitive, and Flip-hatch's tag was
incorrectly lowercase. This prevented jobs from being picked up
by the runner. Fix the runner tag for Flip-hatch.
Based on https://gitlab.freedesktop.org/mesa/mesa/-/commit/03b480d3
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
|
|
Original rationale for those had been the reduced cost of mntput()
for the stuff that is mounted somewhere. Mount refcount increments and
decrements are frequent; what's worse, they tend to concentrate on the
same instances and cacheline pingpong is quite noticable.
As the result, mount refcounts are per-cpu; that allows a very cheap
increment. Plain decrement would be just as easy, but decrement-and-test
is anything but (we need to add the components up, with exclusion against
possible increment-from-zero, etc.).
Fortunately, there is a very common case where we can tell that decrement
won't be the final one - if the thing we are dropping is currently
mounted somewhere. We have an RCU delay between the removal from mount
tree and dropping the reference that used to pin it there, so we can
just take rcu_read_lock() and check if the victim is mounted somewhere.
If it is, we can go ahead and decrement without and further checks -
the reference we are dropping is not the last one. If it isn't, we
get all the fun with locking, carefully adding up components, etc.,
but the majority of refcount decrements end up taking the fast path.
There is a major exception, though - pipes and sockets. Those live
on the internal filesystems that are not going to be mounted anywhere.
They are not going to be _un_mounted, of course, so having to take the
slow path every time a pipe or socket gets closed is really obnoxious.
Solution had been to mark them as long-lived ones - essentially faking
"they are mounted somewhere" indicator.
With minor modification that works even for ones that do eventually get
dropped - all it takes is making sure we have an RCU delay between
clearing the "mounted somewhere" indicator and dropping the reference.
There are some additional twists (if you want to drop a dozen of such
internal mounts, you'd be better off with clearing the indicator on
all of them, doing an RCU delay once, then dropping the references),
but in the basic form it had been
* use kern_mount() if you want your internal mount to be
a long-term one.
* use kern_unmount() to undo that.
Unfortunately, the things did rot a bit during the mount API reshuffling.
In several cases we have lost the "fake the indicator" part; kern_unmount()
on the unmount side remained (it doesn't warn if you use it on a mount
without the indicator), but all benefits regaring mntput() cost had been
lost.
To get rid of that bitrot, let's add a new helper that would work
with fs_context-based API: fc_mount_longterm(). It's a counterpart
of fc_mount() that does, on success, mark its result as long-term.
It must be paired with kern_unmount() or equivalents.
Converted:
1) mqueue (it used to use kern_mount_data() and the umount side
is still as it used to be)
2) hugetlbfs (used to use kern_mount_data(), internal mount is
never unmounted in this one)
3) i915 gemfs (used to be kern_mount() + manual remount to set
options, still uses kern_unmount() on umount side)
4) v3d gemfs (copied from i915)
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
These runners are no more. So remove the jobs.
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
In target mode, extra interrupts can be received between the end of a
transfer and halting the module if the host continues sending more data.
If the interrupt from this occurs after the reinit_completion() then the
completion counter is left at a non-zero value. The next unrelated
transfer initiated by userspace will then complete immediately without
waiting for the interrupt or writing to the RX buffer.
Fix it by resetting the counter before the transfer so that lingering
values are cleared. This is done after clearing the FIFOs and the
status register but before the transfer is initiated, so no interrupts
should be received at this point resulting in other race conditions.
Fixes: 4f5ee75ea171 ("spi: spi-fsl-dspi: Replace interruptible wait queue with a simple completion")
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250627-james-nxp-spi-dma-v4-1-178dba20c120@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The common QPIC code does not do any boundary checking when it handles
the command elements and scatter gater list arrays of a BAM transaction,
thus it allows to access out of bounds elements in those.
Although it is the responsibility of the given driver to allocate enough
space for all possible BAM transaction variations, however there can be
mistakes in the driver code which can lead to hidden memory corruption
issues which are hard to debug.
This kind of problem has been observed during testing the 'spi-qpic-snand'
driver. Although the driver has been fixed with a preceding patch, but it
still makes sense to reduce the chance of having such errors again later.
In order to prevent such errors, change the qcom_alloc_bam_transaction()
function to store the number of elements of the arrays in the
'bam_transaction' strucutre during allocation. Also, add sanity checks to
the qcom_prep_bam_dma_desc_{cmd,data}() functions to avoid using out of
bounds indices for the arrays.
Tested-by: Lakshmi Sowjanya D <quic_laksd@quicinc.com> # on SDX75
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://patch.msgid.link/20250618-qpic-snand-avoid-mem-corruption-v3-2-319c71296cda@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Using the mtd_nandbiterrs module for testing the driver occasionally
results in weird things like below.
1. swiotlb mapping fails with the following message:
[ 85.926216] qcom_snand 79b0000.spi: swiotlb buffer is full (sz: 4294967294 bytes), total 512 (slots), used 0 (slots)
[ 85.932937] qcom_snand 79b0000.spi: failure in mapping desc
[ 87.999314] qcom_snand 79b0000.spi: failure to write raw page
[ 87.999352] mtd_nandbiterrs: error: write_oob failed (-110)
Rebooting the board after this causes a panic due to a NULL pointer
dereference.
2. If the swiotlb mapping does not fail, rebooting the board may result
in a different panic due to a bad spinlock magic:
[ 256.104459] BUG: spinlock bad magic on CPU#3, procd/2241
[ 256.104488] Unable to handle kernel paging request at virtual address ffffffff0000049b
...
Investigating the issue revealed that these symptoms are results of
memory corruption which is caused by out of bounds access within the
driver.
The driver uses a dynamically allocated structure for BAM transactions,
which structure must have enough space for all possible variations of
different flash operations initiated by the driver. The required space
heavily depends on the actual number of 'codewords' which is calculated
from the pagesize of the actual NAND chip.
Although the qcom_nandc_alloc() function allocates memory for the BAM
transactions during probe, but since the actual number of 'codewords'
is not yet know the allocation is done for one 'codeword' only.
Because of this, whenever the driver does a flash operation, and the
number of the required transactions exceeds the size of the allocated
arrays the driver accesses memory out of the allocated range.
To avoid this, change the code to free the initially allocated BAM
transactions memory, and allocate a new one once the actual number of
'codewords' required for a given NAND chip is known.
Fixes: 7304d1909080 ("spi: spi-qpic: add driver for QCOM SPI NAND flash Interface")
Reviewed-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://patch.msgid.link/20250618-qpic-snand-avoid-mem-corruption-v3-1-319c71296cda@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In probe(), two arrays of structs are allocated with the devm_kmalloc()
function, but the memory size of the allocations were given as the arrays'
length (pmic->common_irq_size for the first call and pmic->dev_irq_size for
the second devm_kmalloc call). The memory size should have been the total
memory needed.
This led to a heap overflow when the struct array was used. The issue was
first discovered with the PocketBeagle2 and BeaglePlay. The common and
device-specific structs are now allocated one at a time within the loop.
Fixes: 38c9f98db20a ("regulator: tps65219: Add support for TPS65215 Regulator IRQs")
Reported-by: Dhruva Gole <d-gole@ti.com>
Closes: https://lore.kernel.org/all/20250619153526.297398-1-d-gole@ti.com/
Tested-by: Robert Nelson <robertcnelson@gmail.com>
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Link: https://patch.msgid.link/20250620154541.2713036-1-s-ramamoorthy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Failing to reset coupling_desc.n_coupled after freeing coupled_rdevs can
lead to NULL pointer dereference when regulators are accessed post-unbind.
This can happen during runtime PM or other regulator operations that rely
on coupling metadata.
For example, on ridesx4, unbinding the 'reg-dummy' platform device triggers
a panic in regulator_lock_recursive() due to stale coupling state.
Ensure n_coupled is set to 0 to prevent access to invalid pointers.
Signed-off-by: Alessandro Carminati <acarmina@redhat.com>
Link: https://patch.msgid.link/20250626083809.314842-1-acarmina@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When __regmap_init() is called from __regmap_init_i2c() and
__regmap_init_spi() (and their devm versions), the bus argument
obtained from regmap_get_i2c_bus() and regmap_get_spi_bus(), may be
allocated using kmemdup() to support quirks. In those cases, the
bus->free_on_exit field is set to true.
However, inside __regmap_init(), buf is not freed on any error path.
This could lead to a memory leak of regmap_bus when __regmap_init()
fails. Fix that by freeing bus on error path when free_on_exit is set.
Fixes: ea030ca68819 ("regmap-i2c: Set regmap max raw r/w from quirks")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Link: https://patch.msgid.link/20250626172823.18725-1-abdun.nihaal@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fix from Greg KH:
"Here is a single staging driver fix for 6.16-rc4. It resolves a build
error in the rtl8723bs driver for some versions of clang on arm64 when
checking the frame size with -Wframe-larger-than.
It has been in linux-next for a while now with no reported issues"
* tag 'staging-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8723bs: Avoid memset() in aes_cipher() and aes_decipher()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are five small serial and tty and vt fixes for 6.16-rc4. Included
in here are:
- kerneldoc fixes for recent vt changes
- imx serial driver fix
- of_node sysfs fix for a regression
- vt missing notification fix
- 8250 dt bindings fix
All of these have been in linux-next for a while with no reported issues"
* tag 'tty-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
dt-bindings: serial: 8250: Make clocks and clock-frequency exclusive
serial: imx: Restore original RXTL for console to fix data loss
serial: core: restore of_node information in sysfs
vt: fix kernel-doc warnings in ucs_get_fallback()
vt: add missing notification when switching back to text mode
|
|
In the current implementation of ad3530r_set_dac_powerdown() function,
the macro AD3530R_OP_MODE_CHAN_MSK(chan->channel) is used to generate
the bitmask for the operating mode of a specific channel. However, this
macro does not account for channels 4-7, which map to the second
register AD3530R_OUTPUT_OPERATING_MODE_1 for the 8 channeled device. As
a result, the bitmask is incorrectly calculated for these channels,
leading to improper configuration of the powerdown mode. Resolve this
issue by adjusting the channel index for channels 4-7 by subtracting 4
before applying the macro. This ensures that the correct bitmask is
generated for the second register.
Fixes: 93583174a3df ("iio: dac: ad3530r: Add driver for AD3530R and AD3531R")
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250626-bug_fix-v1-1-eb3c2b370f10@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Change the data type of the "adi,gain-milli" property from u32 to u16.
The devicetree binding specifies it as uint16, so we need to read it as
such to avoid an -EOVERFLOW error when parsing the property.
Fixes: c904e6dcf402 ("iio: adc: ad7380: add support for adaq4370-4 and adaq4380-4")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250619-iio-adc-ad7380-fix-adi-gain-milli-parsing-v1-1-4c27fb426860@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Use spi_is_bpw_supported() instead of directly accessing spi->controller
->bits_per_word_mask. bits_per_word_mask may be 0, which implies that
8-bits-per-word is supported. spi_is_bpw_supported() takes this into
account while spi_ctrl_mask == SPI_BPW_MASK(8) does not.
Fixes: 0b2a740b424e ("iio: adc: ad7949: enable use with non 14/16-bit controllers")
Closes: https://lore.kernel.org/linux-spi/c8b8a963-6cef-4c9b-bfef-dab2b7bd0b0f@sirena.org.uk/
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20250611-iio-adc-ad7949-use-spi_is_bpw_supported-v1-1-c4e15bfd326e@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
fxls8962af_fifo_flush() uses indio_dev->active_scan_mask (with
iio_for_each_active_channel()) without making sure the indio_dev
stays in buffer mode.
There is a race if indio_dev exits buffer mode in the middle of the
interrupt that flushes the fifo. Fix this by calling
synchronize_irq() to ensure that no interrupt is currently running when
disabling buffer mode.
Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read
[...]
_find_first_bit_le from fxls8962af_fifo_flush+0x17c/0x290
fxls8962af_fifo_flush from fxls8962af_interrupt+0x80/0x178
fxls8962af_interrupt from irq_thread_fn+0x1c/0x7c
irq_thread_fn from irq_thread+0x110/0x1f4
irq_thread from kthread+0xe0/0xfc
kthread from ret_from_fork+0x14/0x2c
Fixes: 79e3a5bdd9ef ("iio: accel: fxls8962af: add hw buffered sampling")
Cc: stable@vger.kernel.org
Suggested-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20250603-fxlsrace-v2-1-5381b36ba1db@geanix.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The AXP717 ADC channel maps is missing a sentinel entry at the end. This
causes a KASAN warning.
Add the missing sentinel entry.
Fixes: 5ba0cb92584b ("iio: adc: axp20x_adc: add support for AXP717 ADC")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://patch.msgid.link/20250607135627.2086850-1-wens@kernel.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
