| Age | Commit message (Collapse) | Author |
|---|
|
Enable IEEE80211_HW_NO_VIRTUAL_MONITOR to ensure the driver is notified of
all monitor interfaces and their channels.
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250625075611.1407687-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
same channel
Due to the lack of NoA(Notice of Absence) mechanism in SoftAP mode, it is
inappropriate to allow concurrent SoftAP and STA to operate on the
different channels.
This patch restricts the concurrent SoftAP and STA to be setup on the same
channel only.
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250625073720.1385210-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
devm_kasprintf() returns NULL on error. Currently, mt7925_thermal_init()
does not check for this case, which results in a NULL pointer
dereference.
Add NULL check after devm_kasprintf() to prevent this issue.
Fixes: 396e41a74a88 ("wifi: mt76: mt7925: support temperature sensor")
Signed-off-by: Henry Martin <bsdhenryma@tencent.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20250625124901.1839832-1-bsdhenryma@tencent.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Since the page_pool for MT76 MMIO devices are created with
PP_FLAG_DMA_SYNC_DEV flag, we do not need to sync_for_device each page
received from the pool since it is already done by the page_pool
codebase.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250625-mt76-sync-for-device-v1-1-e687e3278e1a@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Move phy num_sta accounting in mt7996_mac_sta_add() and
mt7996_mac_sta_remove() routines in order to take into account all
possibles MLO links.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250704-mt7996-mlo-fixes-v1-9-356456c73f43@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Generalize mt7996_tx_check_aggr() and mt7996_txwi_free() routines to
introduce MLO support for MT7996 driver.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250704-mt7996-mlo-fixes-v1-8-356456c73f43@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
sta->valid_links bitmask can be set even for non-MLO client.
Fixes: dd82a9e02c054 ("wifi: mt76: mt7996: Rely on mt7996_sta_link in sta_add/sta_remove callbacks")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250704-mt7996-mlo-fixes-v1-7-356456c73f43@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Fis possible Out-Of-Boundary access in mt7996_tx routine if link_id is
set to IEEE80211_LINK_UNSPECIFIED
Fixes: 3ce8acb86b661 ("wifi: mt76: mt7996: Update mt7996_tx to MLO support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250704-mt7996-mlo-fixes-v1-6-356456c73f43@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Use proper link_id in mt7996_tx_prepare_skb routine for mlink lookup.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250704-mt7996-mlo-fixes-v1-5-356456c73f43@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
msta_link->wcid.sta is already set to 1 in mt7996_mac_sta_init_link
routine.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250704-mt7996-mlo-fixes-v1-4-356456c73f43@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
mt7996_mcu_sta_mld_setup_tlv()
Reuse for_each_sta_active_link utility macro in
mt7996_mcu_sta_mld_setup_tlv routine.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250704-mt7996-mlo-fixes-v1-3-356456c73f43@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Use proper link_id value for secondary link lookup in
mt7996_mcu_sta_mld_setup_tlv routine.
Fixes: 00cef41d9d8f5 ("wifi: mt76: mt7996: Add mt7996_mcu_sta_mld_setup_tlv() and mt7996_mcu_sta_eht_mld_tlv()")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250704-mt7996-mlo-fixes-v1-2-356456c73f43@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Reuse the vif deflink for link_id = 0 in order to avoid confusion with
vif->bss_conf, which also gets a link id of 0.
Link: https://patch.msgid.link/20250704-mt7996-mlo-fixes-v1-1-356456c73f43@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
When running in AP mode and deauthenticating a client that's in powersave
mode, the disassoc/deauth packet can get stuck in a tx queue along with
other buffered frames. This can fill up hardware queues with frames
that are only released after the WTBL slot is reused for another client.
Fix this by moving deauth packets to the ALTX queue.
Reported-by: Chad Monroe <chad.monroe@adtran.com>
Link: https://patch.msgid.link/20250707154702.1726-2-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Several places use rcu_dereference to get a wcid entry without validating
if the index exceeds the array boundary. Fix this by using a helper function,
which handles validation.
Link: https://patch.msgid.link/20250707154702.1726-1-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
during resume
Fix a race condition where a second suspend notification from another
SCMI agent wakes the system before SCMI_SYSPOWER_IDLE is set, leading
to ignored suspend requests. This is due to interrupts triggering early
execution of `scmi_userspace_notifier()` before the SCMI state is updated.
To resolve this, set SCMI_SYSPOWER_IDLE earlier in the device resume
path, prior to `thaw_processes()`. This ensures the SCMI state is
correct when the notifier runs, allowing the system to suspend again
as expected.
On some platforms using SCMI, SCP cannot distinguish between CPU idle
and suspend since both result in cluster power-off. By explicitly setting
the idle state early, the Linux SCMI agent can correctly re-suspend in
response to external notifications.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250704-scmi-pm-v2-2-9316cec2f9cc@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Introduce suspend and resume power management callbacks for `scmi_bus_type`,
modeled after `platform_pm_ops`. This enables SCMI devices on the bus to
implement their own suspend and resume behavior, allowing for more
fine-grained power control at the device level.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250704-scmi-pm-v2-1-9316cec2f9cc@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The decap offload configuration should only be applied after the STA has
been successfully initialized. Attempting to configure it earlier can lead
to corruption of the MAC configuration in the chip's hardware state.
Add an early check for `msta->deflink.wcid.sta` to ensure the station peer
is properly initialized before proceeding with decapsulation offload
configuration.
Cc: stable@vger.kernel.org
Fixes: 24299fc869f7 ("mt76: mt7921: enable rx header traslation offload")
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Link: https://patch.msgid.link/f23a72ba7a3c1ad38ba9e13bb54ef21d6ef44ffb.1748149855.git.deren.wu@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
mt7925_sta_set_decap_offload()
Add a NULL check for msta->vif before accessing its members to prevent
a kernel panic in AP mode deployment. This also fix the issue reported
in [1].
The crash occurs when this function is triggered before the station is
fully initialized. The call trace shows a page fault at
mt7925_sta_set_decap_offload() due to accessing resources when msta->vif
is NULL.
Fix this by adding an early return if msta->vif is NULL and also check
wcid.sta is ready. This ensures we only proceed with decap offload
configuration when the station's state is properly initialized.
[14739.655703] Unable to handle kernel paging request at virtual address ffffffffffffffa0
[14739.811820] CPU: 0 UID: 0 PID: 895854 Comm: hostapd Tainted: G
[14739.821394] Tainted: [C]=CRAP, [O]=OOT_MODULE
[14739.825746] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
[14739.831577] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[14739.838538] pc : mt7925_sta_set_decap_offload+0xc0/0x1b8 [mt7925_common]
[14739.845271] lr : mt7925_sta_set_decap_offload+0x58/0x1b8 [mt7925_common]
[14739.851985] sp : ffffffc085efb500
[14739.855295] x29: ffffffc085efb500 x28: 0000000000000000 x27: ffffff807803a158
[14739.862436] x26: ffffff8041ececb8 x25: 0000000000000001 x24: 0000000000000001
[14739.869577] x23: 0000000000000001 x22: 0000000000000008 x21: ffffff8041ecea88
[14739.876715] x20: ffffff8041c19ca0 x19: ffffff8078031fe0 x18: 0000000000000000
[14739.883853] x17: 0000000000000000 x16: ffffffe2aeac1110 x15: 000000559da48080
[14739.890991] x14: 0000000000000001 x13: 0000000000000000 x12: 0000000000000000
[14739.898130] x11: 0a10020001008e88 x10: 0000000000001a50 x9 : ffffffe26457bfa0
[14739.905269] x8 : ffffff8042013bb0 x7 : ffffff807fb6cbf8 x6 : dead000000000100
[14739.912407] x5 : dead000000000122 x4 : ffffff80780326c8 x3 : 0000000000000000
[14739.919546] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffff8041ececb8
[14739.926686] Call trace:
[14739.929130] mt7925_sta_set_decap_offload+0xc0/0x1b8 [mt7925_common]
[14739.935505] ieee80211_check_fast_rx+0x19c/0x510 [mac80211]
[14739.941344] _sta_info_move_state+0xe4/0x510 [mac80211]
[14739.946860] sta_info_move_state+0x1c/0x30 [mac80211]
[14739.952116] sta_apply_auth_flags.constprop.0+0x90/0x1b0 [mac80211]
[14739.958708] sta_apply_parameters+0x234/0x5e0 [mac80211]
[14739.964332] ieee80211_add_station+0xdc/0x190 [mac80211]
[14739.969950] nl80211_new_station+0x46c/0x670 [cfg80211]
[14739.975516] genl_family_rcv_msg_doit+0xdc/0x150
[14739.980158] genl_rcv_msg+0x218/0x298
[14739.983830] netlink_rcv_skb+0x64/0x138
[14739.987670] genl_rcv+0x40/0x60
[14739.990816] netlink_unicast+0x314/0x380
[14739.994742] netlink_sendmsg+0x198/0x3f0
[14739.998664] __sock_sendmsg+0x64/0xc0
[14740.002324] ____sys_sendmsg+0x260/0x298
[14740.006242] ___sys_sendmsg+0xb4/0x110
Cc: stable@vger.kernel.org
Link: https://github.com/morrownr/USB-WiFi/issues/603 [1]
Fixes: b859ad65309a ("wifi: mt76: mt7925: add link handling in mt7925_sta_set_decap_offload")
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Link: https://patch.msgid.link/35aedbffa050e98939264300407a52ba4e236d52.1748149855.git.deren.wu@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
The IEs should be processed and filled into the command tlv separately
according to each band.
Cc: stable@vger.kernel.org
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250616063649.1100503-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Update the destination index to use 'n_ssids', which is incremented only
when a valid SSID is present. Previously, both mt76_connac_mcu_hw_scan()
and mt7925_mcu_hw_scan() used the loop index 'i' for the destination
array, potentially leaving gaps if any source SSIDs had zero length.
Cc: stable@vger.kernel.org
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Michael Lo <michael.lo@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250612062046.160598-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
MT_INT_TX_DONE_MCU_WM may cause tx interrupt to be mishandled
during a reset failure, leading to the reset process failing.
By using MT_INT_TX_DONE_MCU instead of MT_INT_TX_DONE_MCU_WM,
the handling of tx interrupt is improved.
Cc: stable@vger.kernel.org
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250612060931.135635-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Since mt7996_mcu_add_rate_ctrl() and mt7996_mcu_set_fixed_field() can't
run in atomic context, move RCU critical section in
mt7996_mcu_add_rate_ctrl() and mt7996_mcu_set_fixed_field(). This patch
fixes a 'sleep while atomic' issue in mt7996_mac_sta_rc_work().
Fixes: 0762bdd30279 ("wifi: mt76: mt7996: rework mt7996_mac_sta_rc_work to support MLO")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Tested-by: Ben Greear <greearb@candelatech.com>
Link: https://patch.msgid.link/20250605-mt7996-sleep-while-atomic-v1-5-d46d15f9203c@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Since mt76_mcu_skb_send_msg() routine can't be executed in atomic context,
move RCU section in mt7996_mcu_add_rate_ctrl() and execute
mt76_mcu_skb_send_msg() in non-atomic context. This is a preliminary
patch to fix a 'sleep while atomic' issue in mt7996_mac_sta_rc_work().
Fixes: 0762bdd30279 ("wifi: mt76: mt7996: rework mt7996_mac_sta_rc_work to support MLO")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250605-mt7996-sleep-while-atomic-v1-4-d46d15f9203c@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Since mt7996_mcu_set_fixed_field() can't be executed in a RCU critical
section, move RCU section in mt7996_mcu_add_rate_ctrl_fixed() and run
mt7996_mcu_set_fixed_field() in non-atomic context. This is a
preliminary patch to fix a 'sleep while atomic' issue in
mt7996_mac_sta_rc_work().
Fixes: 0762bdd30279 ("wifi: mt76: mt7996: rework mt7996_mac_sta_rc_work to support MLO")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250605-mt7996-sleep-while-atomic-v1-3-d46d15f9203c@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Since mt76_mcu_skb_send_msg() routine can't be executed in atomic context,
move RCU section in mt7996_mcu_set_fixed_field() and execute
mt76_mcu_skb_send_msg() in non-atomic context. This is a preliminary
patch to fix a 'sleep while atomic' issue in mt7996_mac_sta_rc_work().
Fixes: 0762bdd30279 ("wifi: mt76: mt7996: rework mt7996_mac_sta_rc_work to support MLO")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250605-mt7996-sleep-while-atomic-v1-2-d46d15f9203c@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Rely on GFP_ATOMIC flag in __mt76_connac_mcu_alloc_sta_req since it can
run in atomic context. This is a preliminary patch to fix a 'sleep while
atomic' issue in mt7996_mac_sta_rc_work().
Fixes: 0762bdd30279 ("wifi: mt76: mt7996: rework mt7996_mac_sta_rc_work to support MLO")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250605-mt7996-sleep-while-atomic-v1-1-d46d15f9203c@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Merge series from Sakari Ailus <sakari.ailus@linux.intel.com>:
Late last year I posted a set to switch to __pm_runtime_mark_last_busy()
and gradually get rid of explicit pm_runtime_mark_last_busy() calls in
drivers, embedding them in the appropriate pm_runtime_*autosuspend*()
calls. The overall feedback I got at the time was that this is an
unnecessary intermediate step, and removing the
pm_runtime_mark_last_busy() calls can be done after adding them to the
relevant Runtime PM autosuspend related functions.
|
|
Avoid dereferencing struct drm_gem_object.import_attach for the
imported dma-buf. The dma_buf field in the GEM object instance refers
to the same buffer. Prepares to make import_attach an implementation
detail of PRIME.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250619113100.70292-3-tzimmermann@suse.de
|
|
Instead of testing import_attach for imported GEM buffers, invoke
drm_gem_is_imported() to do the test.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250619113100.70292-2-tzimmermann@suse.de
|
|
If any of the ACPI calls fail, memory allocated for the input buffer
would be leaked. Fix failure paths to free allocated memory.
Also add checks to ensure the allocations succeeded in the first place.
Reported-by: Danilo Krummrich <dakr@kernel.org>
Fixes: 176fdcbddfd2 ("drm/nouveau/gsp/r535: add support for booting GSP-RM")
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250617040036.2932-1-bskeggs@nvidia.com
|
|
RISC-V SpacemiT Reset for 6.17
- Add reset driver support for K1 SoC
* tag 'spacemit-reset-for-6.17-1':
reset: spacemit: add support for SpacemiT CCU resets
clk: spacemit: define three reset-only CCUs
clk: spacemit: set up reset auxiliary devices
soc: spacemit: create a header for clock/reset registers
dt-bindings: soc: spacemit: define spacemit,k1-ccu resets
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
Implement reset support for SpacemiT CCUs. A SpacemiT reset controller
device is an auxiliary device associated with a clock controller (CCU).
This patch defines the reset controllers for the MPMU, APBC, and MPMU
CCUs, which already define clock controllers. It also adds RCPU, RCPU2,
and ACPB2 CCUs, which only define resets.
Signed-off-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20250702113709.291748-6-elder@riscstar.com
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
The vgem driver does not need to create a platform device, as there is
no real platform resources associated it, it only did so because it was
simple to do that in order to get a device to use for resource
management of drm resources. Change the driver to use the faux device
instead as this is NOT a real platform device.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/2025070114-iron-shiny-b92e@gregkh
|
|
The vkms driver does not need to create a platform device, as there is
no real platform resources associated it, it only did so because it was
simple to do that in order to get a device to use for resource
management of drm resources. Change the driver to use the faux device
instead as this is NOT a real platform device.
Tested-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Melissa Wen <melissa.srw@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/2025070147-antics-pleat-edd2@gregkh
|
|
The vast majority of drivers that use GEM-SHMEM helpers do not use
an s/g table for imported buffers; specifically all drivers that use
DRM_GEM_SHMEM_DRIVER_OPS. Therefore convert the initializer macro
to DRM_GEM_SHMEM_DRIVER_OPS_NO_MAP_SGT and remove the latter. This
helps to avoid swiotbl errors, such as seen with some Aspeed systems
ast 0000:07:00.0: swiotlb buffer is full (sz: 3145728 bytes), total 32768 (slots), used 0 (slots)
The error is caused by the system's limited DMA capabilities and can
happen with any GEM-SHMEM-based driver. It results in a performance
penalty.
In the case of vgem and vkms, the devices do not support DMA at all,
which can result in failure to map the buffer object into the kernel's
address space. [1][2] Avoiding the s/g table fixes this problem.
The other drivers based on GEM-SHMEM, imagination, lima, panfrost,
panthor, v3d and virtio, use the s/g table of imported buffers. Neither
driver uses the default initializer, so they won't be affected by
this change.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: Zenghui Yu <zenghui.yu@linux.dev>
Closes: https://lore.kernel.org/dri-devel/6d22bce3-4533-4cfa-96ba-64352b715741@linux.dev/ # [1]
Reported-by: José Expósito <jose.exposito89@gmail.com>
Closes: https://lore.kernel.org/dri-devel/20250311172054.2903-1-jose.exposito89@gmail.com/ # [2]
Tested-by: Zenghui Yu <zenghui.yu@linux.dev>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://lore.kernel.org/r/20250630143537.309052-1-tzimmermann@suse.de
|
|
Stop using an entire struct packet_data just for its embedded list_head.
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Link: https://lore.kernel.org/r/20250609184659.7210-4-stuart.w.hayes@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
This driver has long outlived it's utility, and it's broken and unloved.
The main use case for this was direct mount with UDF of cd-rw drives
that required 32kb packets. It would collect writes into that size and
write them out in multiples of that. That's not a common use case
anymore, the world has moved on from those kinds of media. To make
matters worse, it's actively breaking setups where it's not even
required or useful.
Link: https://lore.kernel.org/linux-block/fxg6dksau4jsk3u5xldlyo2m7qgiux6vtdrz5rywseotsouqdv@urcrwz6qtd3r/
Link: https://lore.kernel.org/linux-block/dcc4836e-6da9-4208-ad27-bbd44b3a2063@kernel.dk/
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For setting the enable value, the input should be 0 or 1 only. Use
kstrtobool() in place of kstrtoint() in mlxbf_pmc_enable_store() to
accept only valid input.
Fixes: 423c3361855c ("platform/mellanox: mlxbf-pmc: Add support for BlueField-3")
Signed-off-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/2ee618c59976bcf1379d5ddce2fc60ab5014b3a9.1751380187.git.shravankr@nvidia.com
[ij: split kstrbool() change to own commit.]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Before programming the event info, validate the event number received as input
by checking if it exists in the event_list. Also fix a typo in the comment for
mlxbf_pmc_get_event_name() to correctly mention that it returns the event name
when taking the event number as input, and not the other way round.
Fixes: 423c3361855c ("platform/mellanox: mlxbf-pmc: Add support for BlueField-3")
Signed-off-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/2ee618c59976bcf1379d5ddce2fc60ab5014b3a9.1751380187.git.shravankr@nvidia.com
[ij: split kstrbool() change to own commit.]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Since the input string passed via the command line appends a newline char,
it needs to be removed before comparison with the event_list.
Fixes: 1a218d312e65 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver")
Signed-off-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/4978c18e33313b48fa2ae7f3aa6dbcfce40877e4.1751380187.git.shravankr@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Selecting the IVC, HSP and BPMP drivers via Kconfig is problematic
because it can create conflicting configurations. Instead, enable them
in the default configuration.
Link: https://lore.kernel.org/r/20250506133118.1011777-12-thierry.reding@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Support for Tegra264 depends on the Tegra186 support, so make sure the
latter is enabled.
Link: https://lore.kernel.org/r/20250506133118.1011777-11-thierry.reding@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The IVC code is library code that other drivers need to select if they
need that library. However, if the symbol is user-selectable this can
lead to conflicts.
Fix this by making the symbol only selectable for COMPILE_TEST and add
a select TEGRA_IVC to TEGRA_BPMP, which is currently the only user.
Link: https://lore.kernel.org/r/20250506133118.1011777-10-thierry.reding@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Link: https://lore.kernel.org/r/20250506133118.1011777-9-thierry.reding@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The PMC block on Tegra264 has undergone a few small changes since it's
Tegra234 predecessor. Match on the new compatible string to select the
updated SoC-specific data.
Link: https://lore.kernel.org/r/20250506133118.1011777-8-thierry.reding@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Calling power_supply_get_property() inside
dell_wmi_ddv_battery_translate() can cause a deadlock since this
function is also being called from the power supply extension code,
in which case psy->extensions_sem is already being held.
Fix this by using the new power_supply_get_property_direct() function
to ignore any power supply extensions when retrieving the battery
serial number.
Tested on a Dell Inspiron 3505.
Reported-by: Hans de Goede <hansg@kernel.org>
Fixes: 058de163a376 ("platform/x86: dell-ddv: Implement the battery matching algorithm")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250627205124.250433-3-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Test that power supply extensions can access properties of their
power supply using power_supply_get_property_direct(). This both
ensures that the functionality works and serves as an example for
future driver developers.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250627205124.250433-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Power supply extensions might want to interact with the underlying
power supply to retrieve data like serial numbers, charging status
and more. However doing so causes psy->extensions_sem to be locked
twice, possibly causing a deadlock.
Provide special variants of power_supply_get/set_property() that
ignore any power supply extensions and thus do not touch the
associated psy->extensions_sem lock.
Suggested-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250627205124.250433-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Tegra264 is the successor to Tegra234, with various improvements and new
hardware.
Link: https://lore.kernel.org/r/20250506133118.1011777-7-thierry.reding@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
