summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-07-09soc/tegra: cbb: Change master/slave to initiator/targetSumit Gupta
Change usage of 'Master/Slave' to 'Initiator/Target' as per the new convention. Signed-off-by: Sumit Gupta <sumitg@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2025-07-09soc/tegra: cbb: Clear ERR_FORCE register with ERR_STATUSSumit Gupta
When error is injected with the ERR_FORCE register, then this register is not auto cleared on clearing the ERR_STATUS register. This causes repeated interrupts on error injection. To fix, set the ERR_FORCE to zero along with clearing the ERR_STATUS register after handling error. Fixes: fc2f151d2314 ("soc/tegra: cbb: Add driver for Tegra234 CBB 2.0") Signed-off-by: Sumit Gupta <sumitg@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2025-07-09platform/x86/amd/hsmp: Enhance the print messages to prevent confusionSuma Hegde
When the HSMP ACPI device is present, loading the amd_hsmp.ko module incorrectly displays the message "HSMP is not supported on Family:%x model:%x\n" despite being supported by the hsmp_acpi.ko module, leading to confusion. To address this issue, relocate the acpi_dev_present() check to the beginning of the hsmp_plt_init() and revise the print message to better reflect the current support status. Additionally, add more error messages in the error paths and debug messages to indicate successful probing for both hsmp_acpi.ko and amd_hsmp.ko modules. Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com> Signed-off-by: Suma Hegde <suma.hegde@amd.com> Link: https://lore.kernel.org/r/20250709105413.2487851-1-suma.hegde@amd.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-07-09firmware: tegra: bpmp: Use of_reserved_mem_region_to_resource() for ↵Rob Herring (Arm)
"memory-region" Use the newly added of_reserved_mem_region_to_resource() function to handle "memory-region" properties. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20250703183434.2073375-1-robh@kernel.org Signed-off-by: Thierry Reding <treding@nvidia.com>
2025-07-09drm/framebuffer: Acquire internal references on GEM handlesThomas Zimmermann
Acquire GEM handles in drm_framebuffer_init() and release them in the corresponding drm_framebuffer_cleanup(). Ties the handle's lifetime to the framebuffer. Not all GEM buffer objects have GEM handles. If not set, no refcounting takes place. This is the case for some fbdev emulation. This is not a problem as these GEM objects do not use dma-bufs and drivers will not release them while fbdev emulation is running. Framebuffer flags keep a bit per color plane of which the framebuffer holds a GEM handle reference. As all drivers use drm_framebuffer_init(), they will now all hold dma-buf references as fixed in commit 5307dce878d4 ("drm/gem: Acquire references on GEM handles for framebuffers"). In the GEM framebuffer helpers, restore the original ref counting on buffer objects. As the helpers for handle refcounting are now no longer called from outside the DRM core, unexport the symbols. v3: - don't mix internal flags with mode flags (Christian) v2: - track framebuffer handle refs by flag - drop gma500 cleanup (Christian) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 5307dce878d4 ("drm/gem: Acquire references on GEM handles for framebuffers") Reported-by: Bert Karwatzki <spasswolf@web.de> Closes: https://lore.kernel.org/dri-devel/20250703115915.3096-1-spasswolf@web.de/ Tested-by: Bert Karwatzki <spasswolf@web.de> Tested-by: Mario Limonciello <superm1@kernel.org> Tested-by: Borislav Petkov (AMD) <bp@alien8.de> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Anusha Srivatsa <asrivats@redhat.com> Cc: Christian König <christian.koenig@amd.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Cc: <stable@vger.kernel.org> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://lore.kernel.org/r/20250707131224.249496-1-tzimmermann@suse.de
2025-07-09serial: sh-sci: Add support for RZ/T2H SCIThierry Bultel
Define a new RSCI port type, and the RSCI 32 bits registers set. The RZ/T2H SCI has a a fifo, and a quite different set of registers from the original SH SCI ones. DMA is not supported yet. Signed-off-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20250630202323.279809-6-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-07-09serial: sh-sci: Use private port IDThierry Bultel
New port types cannot be added in serial_core.h, which is shared with userspace. In order to support new port types, the coming new ones will have BIT(7) set in the id value, and in this case, uartport->type is set to PORT_GENERIC. This commit therefore changes all the places where the port type is read, by not relying on uartport->type but on the private value stored in struct sci_port. Signed-off-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20250630202323.279809-5-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-07-09serial: sh-sci: Replace direct stop_rx/stop_tx calls with port ops in ↵Lad Prabhakar
sci_shutdown() Replace direct calls to sci_stop_rx() and sci_stop_tx() with port ops callbacks in sci_shutdown(). This enables the RSCI driver, which reuses the SCI core but implements its own stop_rx and stop_tx logic, to reuse sci_shutdown() without duplicating code. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20250630202323.279809-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-07-09serial: sh-sci: Add R-Car Gen5 supportKuninori Morimoto
Add "rcar-gen5-scif" compatible string for R-Car Gen5 support. Signed-off-by: Nghia Nguyen <nghia.nguyen.jg@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/87cyahdgfu.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-07-09serial: 8520_ce4100: Reuse mem_serial_in() in ce4100_mem_serial_in()Andy Shevchenko
In one place in ce4100_mem_serial_in() the code may be replaced with mem_serial_in() call. Do it so and collapse two conditionals into one. Suggested-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20250701134200.2621898-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-07-09pch_uart: Fix dma_sync_sg_for_device() nents valueThomas Fourier
The dma_sync_sg_for_device() functions should be called with the same nents as the dma_map_sg(), not the value the map function returned according to the documentation in Documentation/core-api/dma-api.rst:450: With the sync_sg API, all the parameters must be the same as those passed into the sg mapping API. Fixes: da3564ee027e ("pch_uart: add multi-scatter processing") Cc: stable <stable@kernel.org> Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20250701113452.18590-2-fourier.thomas@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-07-09serial: core: fix OF node leakJohan Hovold
Make sure to drop the OF node reference taken when initialising the control and port devices when the devices are later released. Fixes: d36f0e9a0002 ("serial: core: restore of_node information in sysfs") Cc: Aidan Stewart <astewart@tektelic.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20250708085817.16070-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-07-09lpfc: don't use file->f_path.dentry for comparisonsAl Viro
If you want a home-grown switch, at least use enum for selector... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Link: https://lore.kernel.org/r/20250708025734.GT1880847@ZenIV Reviewed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-07-09debugfs_get_aux(): allow storing non-const void *Al Viro
typechecking is up to users, anyway... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Link: https://lore.kernel.org/r/20250702212616.GI3406663@ZenIV Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-07-09fix tt_command_write()Al Viro
1) unbalanced debugfs_file_get(). Not needed in the first place - file_operations are accessed only via debugfs_create_file(), so debugfs wrappers will take care of that itself. 2) kmalloc() for a buffer used only for duration of a function is not a problem, but for a buffer no longer than 16 bytes? 3) strstr() is for finding substrings; for finding a character there's strchr(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: "Rafael J. Wysocki" <rafael@kernel.org> Link: https://lore.kernel.org/r/20250702212542.GH3406663@ZenIV Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-07-09netronome: don't bother with debugfs_real_fops()Al Viro
Just turn nfp_tx_q_show() into a wrapper for helper that gets told whether it's tx or xdp via an explicit argument and have nfp_xdp_q_show() call the underlying helper instead. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: Louis Peens <louis.peens@corigine.com> Link: https://lore.kernel.org/r/20250702212205.GF3406663@ZenIV Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-07-09regmap: get rid of redundant debugfs_file_{get,put}()Al Viro
pointless in ->read()/->write() of file_operations used only via debugfs_create_file() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Link: https://lore.kernel.org/r/20250702211602.GC3406663@ZenIV Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-07-09hfi1: get rid of redundant debugfs_file_{get,put}()Al Viro
All files in question are created via debugfs_create_file(), so exclusion with removals is provided by debugfs wrappers; as the matter of fact, hfi1-private wrappers had been redundant at least since 2017... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Link: https://lore.kernel.org/r/20250702211508.GB3406663@ZenIV Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-07-09zynqmp: don't bother with debugfs_file_{get,put}() in proxied fopsAl Viro
When debugfs file has been created by debugfs_create_file_unsafe(), we do need the file_operations methods to use debugfs_file_{get,put}() to prevent concurrent removal; for files created by debugfs_create_file() that is done in the wrappers that call underlying methods, so there's no point whatsoever duplicating that in the underlying methods themselves. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Link: https://lore.kernel.org/r/20250702211408.GA3406663@ZenIV Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-07-09cpuidle: riscv-sbi: Drop redundant sync_state supportUlf Hansson
The recent updates to the genpd core, can entirely manage the sync_state support for the cpuidle-riscv-sbi-domain. More precisely, genpd prevents our ->power_off() callback from being invoked, until all of our consumers are ready for it. Let's therefore drop the sync_state support for the cpuidle-riscv-sbi-domain as it has become redundant. Cc: Anup Patel <anup@brainfault.org> Cc: linux-riscv@lists.infradead.org Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Colibri iMX8X Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> # TI AM62A,Xilinx ZynqMP ZCU106 Reviewed-by: Rahul Pathak <rpathak@ventanamicro.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20250701114733.636510-25-ulf.hansson@linaro.org
2025-07-09cpuidle: psci: Drop redundant sync_state supportUlf Hansson
The recent updates to the genpd core, can entirely manage the sync_state support for the cpuidle-psci-domain. More precisely, genpd prevents our ->power_off() callback from being invoked, until all of our consumers are ready for it. Let's therefore drop the sync_state support for the cpuidle-psci-domain as it has become redundant. Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Colibri iMX8X Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> # TI AM62A,Xilinx ZynqMP ZCU106 Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20250701114733.636510-24-ulf.hansson@linaro.org
2025-07-09pmdomain: core: Leave powered-on genpds on until sync_stateUlf Hansson
Powering-off a genpd that was on during boot, before all of its consumer devices have been probed, is certainly prone to problems. For OF based platforms we can rely on using the sync_state mechanism that the fw_devlink provides, to understand when all consumers for a genpd provider have been probed. Let's therefore prevent these genpds from being powered-off until the ->sync_state() callback gets called. Note that, for non-OF based platform we will keep relying on the late_initcall_sync, which seems to be the best we can do for now. Suggested-by: Saravana Kannan <saravanak@google.com> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Colibri iMX8X Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> # TI AM62A,Xilinx ZynqMP ZCU106 Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20250701114733.636510-23-ulf.hansson@linaro.org
2025-07-09pmdomain: core: Leave powered-on genpds on until late_initcall_syncUlf Hansson
Powering-off a genpd that was on during boot, before all of its consumer devices have been probed, is certainly prone to problems. As a step to improve this situation, let's prevent these genpds from being powered-off until genpd_power_off_unused() gets called, which is a late_initcall_sync(). Note that, this still doesn't guarantee that all the consumer devices has been probed before we allow to power-off the genpds. Yet, this should be a step in the right direction. Suggested-by: Saravana Kannan <saravanak@google.com> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Colibri iMX8X Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> # TI AM62A,Xilinx ZynqMP ZCU106 Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20250701114733.636510-22-ulf.hansson@linaro.org
2025-07-09pmdomain: core: Default to use of_genpd_sync_state() for genpd providersUlf Hansson
Unless the typical platform driver that act as genpd provider, has its own ->sync_state() callback implemented let's default to use of_genpd_sync_state(). More precisely, while adding a genpd OF provider let's assign the ->sync_state() callback, in case the fwnode has a device and its driver doesn't have the ->sync_state() set already. In this way the typical platform driver doesn't need to assign ->sync_state(), unless it has some additional things to manage beyond genpds. Suggested-by: Saravana Kannan <saravanak@google.com> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Colibri iMX8X Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> # TI AM62A,Xilinx ZynqMP ZCU106 Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20250701114733.636510-21-ulf.hansson@linaro.org
2025-07-09pmdomain: core: Add common ->sync_state() support for genpd providersUlf Hansson
If the genpd provider's fwnode doesn't have an associated struct device with it, we can make use of the generic genpd->dev and it corresponding driver internally in genpd to manage ->sync_state(). More precisely, while adding a genpd OF provider let's check if the fwnode has a device and if not, make the preparation to handle ->sync_state() internally through the genpd_provider_driver and the genpd_provider_bus. Note that, genpd providers may opt out from this behaviour by setting the GENPD_FLAG_NO_SYNC_STATE config options for the genpds in question. Suggested-by: Saravana Kannan <saravanak@google.com> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Colibri iMX8X Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> # TI AM62A,Xilinx ZynqMP ZCU106 Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20250701114733.636510-19-ulf.hansson@linaro.org
2025-07-09driver core: Export get_dev_from_fwnode()Ulf Hansson
It has turned out get_dev_from_fwnode() is useful at a few other places outside of the driver core, as in gpiolib.c for example. Therefore let's make it available as a common helper function. Suggested-by: Saravana Kannan <saravanak@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Colibri iMX8X Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> # TI AM62A,Xilinx ZynqMP ZCU106 Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20250701114733.636510-18-ulf.hansson@linaro.org
2025-07-09firmware: xilinx: Use of_genpd_sync_state()Ulf Hansson
To make sure genpd tries to power off unused PM domains, let's call of_genpd_sync_state() from our own ->sync_state() callback. Cc: Michal Simek <michal.simek@amd.com> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Colibri iMX8X Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> # TI AM62A,Xilinx ZynqMP ZCU106 Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20250701114733.636510-17-ulf.hansson@linaro.org
2025-07-09firmware: xilinx: Don't share zynqmp_pm_init_finalize()Ulf Hansson
As there no longer any users outside the zynqmp firmware driver of zynqmp_pm_init_finalize(), let's turn into a local static function. Cc: Michal Simek <michal.simek@amd.com> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Colibri iMX8X Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> # TI AM62A,Xilinx ZynqMP ZCU106 Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20250701114733.636510-16-ulf.hansson@linaro.org
2025-07-09firmware/pmdomain: xilinx: Move ->sync_state() support to firmware driverUlf Hansson
Rather than having the genpd provider to add device_links for each device that gets attached, to implement the ->sync_state() support, let's rely on fw_devlink to do this for us. In this way, we can simplify the code by moving the ->sync_state() callback into the firmware driver, so let's do that. Cc: Michael Tretter <m.tretter@pengutronix.de> Cc: Michal Simek <michal.simek@amd.com> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Colibri iMX8X Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> # TI AM62A,Xilinx ZynqMP ZCU106 Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20250701114733.636510-15-ulf.hansson@linaro.org
2025-07-09pmdomain: qcom: rpmhpd: Use of_genpd_sync_state()Ulf Hansson
To make sure genpd tries to power off unused PM domains, let's call of_genpd_sync_state() from our own ->sync_state() callback. Cc: Bjorn Andersson <andersson@kernel.org> Cc: Konrad Dybcio <konradybcio@kernel.org> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Colibri iMX8X Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> # TI AM62A,Xilinx ZynqMP ZCU106 Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20250701114733.636510-14-ulf.hansson@linaro.org
2025-07-09pmdomain: qcom: rpmpd: Use of_genpd_sync_state()Ulf Hansson
To make sure genpd tries to power off unused PM domains, let's call of_genpd_sync_state() from our own ->sync_state() callback. Cc: Bjorn Andersson <andersson@kernel.org> Cc: Konrad Dybcio <konradybcio@kernel.org> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Colibri iMX8X Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> # TI AM62A,Xilinx ZynqMP ZCU106 Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20250701114733.636510-13-ulf.hansson@linaro.org
2025-07-09cpuidle: riscv-sbi: Opt-out from genpd's common ->sync_state() supportUlf Hansson
The riscv-sbi-domain implements its own specific ->sync_state() callback. Let's set the GENPD_FLAG_NO_SYNC_STATE to inform genpd about it. Moreover, let's call of_genpd_sync_state() to make sure genpd tries to power off unused PM domains. Cc: Anup Patel <anup@brainfault.org> Cc: linux-riscv@lists.infradead.org Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Colibri iMX8X Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> # TI AM62A,Xilinx ZynqMP ZCU106 Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Rahul Pathak <rpathak@ventanamicro.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20250701114733.636510-12-ulf.hansson@linaro.org
2025-07-09cpuidle: psci: Opt-out from genpd's common ->sync_state() supportUlf Hansson
The cpuidle-psci-domain implements its own specific ->sync_state() callback. Let's set the GENPD_FLAG_NO_SYNC_STATE to inform genpd about it. Moreover, let's call of_genpd_sync_state() to make sure genpd tries to power off unused PM domains. Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Colibri iMX8X Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> # TI AM62A,Xilinx ZynqMP ZCU106 Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20250701114733.636510-11-ulf.hansson@linaro.org
2025-07-09soc/tegra: pmc: Opt-out from genpd's common ->sync_state() supportUlf Hansson
Tegra implements its own specific ->sync_state() callback for the genpd providers. Let's set the GENPD_FLAG_NO_SYNC_STATE to inform genpd about it. Moreover, let's call of_genpd_sync_state() to make sure genpd tries to power off unused PM domains. Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Colibri iMX8X Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> # TI AM62A,Xilinx ZynqMP ZCU106 Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20250701114733.636510-10-ulf.hansson@linaro.org
2025-07-09pmdomain: core: Export a common ->sync_state() helper for genpd providersUlf Hansson
In some cases the typical platform driver that act as genpd provider, may need its own ->sync_state() callback to manage various things. In this regards, the provider most likely wants to allow its corresponding genpds to be powered-off. For this reason, let's introduce a new genpd helper function, of_genpd_sync_state() that helps genpd provider drivers to achieve this. Suggested-by: Saravana Kannan <saravanak@google.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Colibri iMX8X Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> # TI AM62A,Xilinx ZynqMP ZCU106 Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20250701114733.636510-8-ulf.hansson@linaro.org
2025-07-09pmdomain: core: Add the genpd->dev to the genpd provider busUlf Hansson
To take the next step for a more common handling of the genpd providers, let's add the genpd->dev to the genpd provider bus when registering a genpd OF provider. Also note, to allow us to add devices to the genpd provider bus we need to make sure the bus has been registered first, which is done via a core_initcall. Hence, calls to of_genpd_add_provider_simple|onecell() must be done after the bus has been registered, else they will fail. Suggested-by: Saravana Kannan <saravanak@google.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Colibri iMX8X Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> # TI AM62A,Xilinx ZynqMP ZCU106 Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20250701114733.636510-7-ulf.hansson@linaro.org
2025-07-09pmdomain: core: Add a bus and a driver for genpd providersUlf Hansson
When we create a genpd via pm_genpd_init() we are initializing a corresponding struct device for it, but we don't add the device to any bus_type. It has not really been needed as the device is used as cookie to help us manage OPP tables. However, to prepare to make better use of the device, let's add a new genpd provider bus_type and a corresponding genpd provider driver. Subsequent changes will make use of this. Suggested-by: Saravana Kannan <saravanak@google.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Colibri iMX8X Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> # TI AM62A,Xilinx ZynqMP ZCU106 Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20250701114733.636510-6-ulf.hansson@linaro.org
2025-07-09pmdomain: core: Prevent registering devices before the busUlf Hansson
We must not register a consumer device to the genpd bus, before registering the bus itself. Even if this doesn't seem to be an issue, let's add a simple check to make sure we really avoid this from happening. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20250701114733.636510-5-ulf.hansson@linaro.org
2025-07-09pmdomain: renesas: rcar-gen4-sysc: Move init to postcore_initcallUlf Hansson
Subsequent changes to genpd adds a limitation that registering a genpd OF providers must be done after its bus registration, which is at core_initcall. To adopt to this, let's move to a postcore_initcall. Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20250701114733.636510-4-ulf.hansson@linaro.org
2025-07-09pmdomain: renesas: rmobile-sysc: Move init to postcore_initcallUlf Hansson
Subsequent changes to genpd adds a limitation that registering a genpd OF providers must be done after its bus registration, which is at core_initcall. To adopt to this, let's move to a postcore_initcall. Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20250701114733.636510-3-ulf.hansson@linaro.org
2025-07-09pmdomain: renesas: rcar-sysc: Add genpd OF provider at postcore_initcallUlf Hansson
Subsequent changes to genpd adds a limitation that registering a genpd OF providers must be done after its bus registration, which is at core_initcall. To adopt to this, let's split the initialization into two steps. The first part keep registering the PM domains with genpd at early_initcall, as this is needed to bringup the CPUs for R-Car H1, by calling rcar_sysc_power_up_cpu(). The second and new part, moves the registration of the genpd OF provider to a postcore_initcall(). Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20250701114733.636510-2-ulf.hansson@linaro.org
2025-07-09pmdomain: qcom: rpmhpd: Add Milos power domainsLuca Weiss
Add the power domains exposed by RPMH in the Qualcomm Milos platform. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250707-sm7635-rpmhpd-v2-2-b4aa37acb065@fairphone.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-07-09staging: gpib: Fix error handling paths in cb_gpib_probe()Christophe JAILLET
If cb_gpib_config() fails, 'info' needs to be freed, as already done in the remove function. While at it, remove a pointless comment related to gpib_attach(). Fixes: e9dc69956d4d ("staging: gpib: Add Computer Boards GPIB driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/bf89d6f2f8b8c680720d02061fc4ebdd805deca8.1751709098.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-07-09staging: gpib: lpvo_usb_gpib: Remove unreachable return statementHarshit Mogalapalli
usb_gpib_read() has a return statement after if else which is unreachable, clean this up. Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Link: https://lore.kernel.org/r/20250703070542.1957371-1-harshit.m.mogalapalli@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-07-09staging: gpib: cec: Fix inconsistent indentation in cec_pci_attach()Harshit Mogalapalli
This is a cleanup which fixes inconsistent indentation. This is found with smatch. drivers/staging/gpib/cec/cec_gpib.c:305 cec_pci_attach() warn: inconsistent indenting Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Link: https://lore.kernel.org/r/20250703065224.1956688-1-harshit.m.mogalapalli@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-07-09staging: gpib: Fix error code in board_type_ioctl()Harshit Mogalapalli
When copy_from_user() fails it return number of bytes it wasn't able to copy. So the correct return value when copy_from_user() fails is -EFAULT. Fixes: 9dde4559e939 ("staging: gpib: Add GPIB common core driver") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Link: https://lore.kernel.org/r/20250703064633.1955893-1-harshit.m.mogalapalli@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-07-09staging: fbtft: cleanup error handling in fbtft_framebuffer_alloc()Abdun Nihaal
The error handling in fbtft_framebuffer_alloc() mixes managed allocation and plain allocation, and performs error handling in an order different from the order in fbtft_framebuffer_release(). Fix them by moving vmem allocation closer to where it is used, and using plain kzalloc() for txbuf allocation. Also remove the duplicate call to fb_deferred_io_cleanup(). Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com> Suggested-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/20250701164537.243282-1-abdun.nihaal@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-07-09pmdomain: amlogic: Constify struct meson_secure_pwrc_domain_dataChristophe JAILLET
'struct meson_secure_pwrc_domain_data' are not modified in these drivers. Constifying these structures moves some data to a read-only section, so increases overall security. On a x86_64, with allmodconfig: Before: ====== text data bss dec hex filename 9248 408 0 9656 25b8 drivers/pmdomain/amlogic/meson-secure-pwrc.o After: ===== text data bss dec hex filename 9344 304 0 9648 25b0 drivers/pmdomain/amlogic/meson-secure-pwrc.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/e71abd8d75dd842690e5a11e38037bcf5feac189.1751816732.git.christophe.jaillet@wanadoo.fr Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-07-09pmdomain: renesas: sort Renesas Kconfig configsKuninori Morimoto
Renesas Kconfig is using "SoC chip number" for CONFIG symbol, but is using "SoC chip name" for menu description. Because of it, it looks random order when we run "make menuconfig". commit 6d5aded8d57f ("soc: renesas: Sort driver description title") sorted Renesas Kconfig by "menu description title order" (= SoC chip name), but it makes confusable to add new config, because developer usually checks CONFIG symbols (= SoC chip number). Let's indicate both "SoC chip number" and "SoC chip name" in description and sort it again. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/87ikkacacf.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-07-09pmdomain: renesas: use menu for RenesasKuninori Morimoto
Current Renesas PM Domains appears on top page. Let's create new menu for Renesas. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/87jz4qcacr.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2026-05-21 13:54:35 +0000