| Age | Commit message (Collapse) | Author |
|---|
|
Intel has 2 completely different "Dollar Cove" PMICs for its Bay Trail /
Cherry Trail SoCs. One is made by X-Powers and is called the AXP288.
The AXP288's builtin charger and fuel-gauge functions are already
supported by the axp288_charger / axp288_fuel_gauge drivers.
The other "Dollar Cove" PMIC is made by TI and does not have any clear TI
denomination, its MFD driver calls it the "Intel Dollar Cove TI PMIC".
The Intel Dollar Cove TI PMIC comes with a coulomb-counters with limited
functionality which is intended to work together with an always on
micro-controller monitoring it for fuel-gauge functionality.
Most devices with the Dollar Cove TI PMIC have full-featured fuel-gauge
functionality exposed through ACPI with the information coming from either
the embedded-controller or a separate full-featured fuel-gauge IC.
But some designs lack this, add a battery-monitoring driver using the
PMIC's coulomb-counter combined with the adc-battery-helper for capacity
estimation for these designs.
Register definitions were taken from kernel/drivers/platform/x86/dc_ti_cc.c
from the Acer A1-840 Android kernel source-code archive named:
"App. Guide_Acer_20151221_A_A.zip"
which is distributed by Acer from the Acer A1-840 support page:
https://www.acer.com/us-en/support/product-support/A1-840/downloads
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250831122942.47875-6-hansg@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Charger ICs often have a status pin which indicates when the charger has
finished charging the battery. Sometimes the status of this pin can be
read over a GPIO.
Add support for optionally reading a charge-finished GPIO and when
available use this to determine when to return POWER_SUPPLY_STATUS_FULL.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250831122942.47875-5-hansg@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Put the fuel-gauge in standby mode when the driver is unbound and on
system shutdown.
This avoids unnecessary battery drain when the system is off.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250831122942.47875-4-hansg@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Switch ug3105_battery to using the new adc-battery-helper, since the
helper's algorithms are a copy of the replaced ug3105_battery code
this should not cause any functional differences.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250831122942.47875-3-hansg@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The TI PMIC used on some Intel Bay/Cherry Trail systems has some builtin
fuel-gauge functionality which just like the UG3105 fuel-gauge is not
a full featured autonomous fuel-gauge.
These fuel-gauges offer accurate current and voltage measurements but
their coulomb-counters are intended to work together with an always on
micro-controller monitoring the fuel-gauge.
Add an adc-battery-helper offering open-circuit-voltage (ocv) and through
that capacity estimation for devices where such limited functionality
fuel-gauges are exposed directly to Linux.
This is a copy of the existing UG3105 estimating code, generalized so that
it can be re-used in other drivers.
The next commit will replace the UG3105 driver's version of this code with
using the adc-battery-helper.
The API has been designed for easy integration into existing power-supply
drivers. For example this functionality might also be a useful addition
to the generic-adc-battery driver.
The requirement of needing the adc_battery_helper struct to be the first
member of a battery driver's data struct is not ideal. This is a compromise
which is necessary to allow directly using the helper's get_property(),
external_power_changed() and suspend()/resume() functions as power-supply /
suspend-resume callbacks.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250831122942.47875-2-hansg@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
[Why]
dm_prepare_suspend() was added in commit 50e0bae34fa6b
("drm/amd/display: Add and use new dm_prepare_suspend() callback")
to allow display to turn off earlier in the suspend sequence.
This caused a regression that HDMI audio sometimes didn't work
properly after resume unless audio was playing during suspend.
[How]
Drop dm_prepare_suspend() callback. All code in it will still run
during dm_suspend(). Also drop unnecessary dm_complete() callback.
dm_complete() was used for failed prepare and also for any case
of successful resume. The code in it already runs in dm_resume().
This change will introduce more time that the display is turned on
during suspend sequence. The compositor can turn it off sooner if
desired.
Cc: Harry Wentland <harry.wentland@amd.com>
Reported-by: Przemysław Kopa <prz.kopa@gmail.com>
Closes: https://lore.kernel.org/amd-gfx/1cea0d56-7739-4ad9-bf8e-c9330faea2bb@kernel.org/T/#m383d9c08397043a271b36c32b64bb80e524e4b0f
Reported-by: Kalvin <hikaph+oss@gmail.com>
Closes: https://github.com/alsa-project/alsa-lib/issues/465
Closes: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/4809
Fixes: 50e0bae34fa6b ("drm/amd/display: Add and use new dm_prepare_suspend() callback")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The copy_to_user() function returns the number of bytes that it wasn't
able to copy, but we should return -EFAULT to the user.
Fixes: 4d82724f7f2b ("drm/amdgpu: Add mapping info option for GEM_OP ioctl")
Fixes: f9db1fc52ceb ("drm/amdgpu: Add ioctl to get all gem handles for a process")
Reviewed-By: David Francis <David.Francis@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Older GPUs did not support memory protection, so the kernel
driver would validate the command submissions (CS) from userspace
to avoid the GPU accessing any memory it shouldn't.
Change any error messages in that validation to dev_warn_once() to
avoid spamming the kernel log in the event of a bad CS. If users
see any of these messages they should report them to the user space
component, which in most cases is mesa
(https://gitlab.freedesktop.org/mesa/mesa/-/issues).
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250829171655.GBaLHgh3VOvuM1UfJg@fat_crate.local
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The header comment above amdgpu_gem_list_handles_ioctl referenced
drm_amdgpu_gem_list_handles_ioctl. Update the comment to reflect the
actual function identifier to avoid misleading prototype warnings.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c:1106: warning: expecting prototype for drm_amdgpu_gem_list_handles_ioctl(). Prototype was for amdgpu_gem_list_handles_ioctl() instead
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Print PD address of VM root instead of GPU address in the debugfs.
On modern GPU's this is what UMR tool expects in the registers
as well.
Fixes: 719b378d3718 ("drm/amdgpu: add debugfs support for VM pagetable per client")
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This version brings along following updates:
- Disable stutter when programming watermarks on dcn32
- Fix pbn_div Calculation Error
- Correct sequences and delays for DCN35 PG & RCG
- Define interfaces for hubbub perfmance monitoring support
- Extend to read eDP general capability 2
- Indicate when custom brightness curves are in use
- Dont wait for pipe update during medupdate/highirq
- Add HDCP retry_limit control parameter
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
dm_mst_get_pbn_divider() returns value integer coming from
the cast from fixed point, but the casted integer will then be used
in dfixed_const to be multiplied by 4096. The cast from fixed point to integer
causes the calculation error becomes bigger when multiplied by 4096.
That makes the calculated pbn_div value becomes smaller than
it should be, which leads to the req_slot number becomes bigger.
Such error is getting reflected in 8k30 timing,
where the correct and incorrect calculated req_slot 62.9 Vs 63.1.
That makes the wrong calculation failed to light up 8k30
after a dock under HBR3 x 4.
[How]
Restore the accuracy by keeping the fraction part
calculated for the left shift operation.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
The current PG & RCG programming in driver has some gaps and incorrect
sequences.
[how]
Added delays after ungating clocks to allow ramp up, increased polling
to allow more time for power up, and removed the incorrect sequences.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
The error message "failed to initialize sw for display support" is used
for both DRM device and vblank initialization failures, making it difficult
to identify the specific failure during troubleshooting.
[How]
Update the vblank initialization error message to
"failed to initialize vblank for display support"
to distinguish it from the DRM device init failure.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
dchubbub supports performance monitoring for hubbub.
The interfaces define the performance monitoring events and their
attributes.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Extend to read eDP general capability 2 in detect_edp_sink_caps().
Reviewed-by: Robin Chen <robin.chen@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Allen Li <wei-guang.li@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
There is a `scale` sysfs attribute that can be used to indicate when
non-linear brightness scaling is in use. As Custom brightness curves
work by linear interpolation of points the scale is no longer linear.
[How]
Indicate non-linear scaling when custom brightness curves in use and
linear scaling otherwise.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <superm1@kernel.org>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why&how]
control flag for the wait during pipe update wait for vupdate should
be set if update type is not fast or med to prevent an invalid sleep
operation
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Add the link index in DP AUX transfer and DPMS functions.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
DM should be able to control HDCP retry limit via configurable
parameter.
[How]
Expose a retry_limit parameter for controlling the maximum number of
retries and lift the hardcode out to DM.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Oleh Kuzhylnyi <okuzhyln@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fetch VBIOS build number from atom rom image. Add a sysfs interface to
read the build number.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Disable dpcd probe quirk to native aux.
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4500
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250904191351.746707-1-Jerry.Zuo@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Implement caching separately for SystemMetrics table from PMFW. The same
table could be used for multiple interfaces. Hence, cache it internally
to avoid multiple queries to the firmware. For SystemMetrics table, 5ms
cache interval is sufficient.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
v1:
Returns different error codes based on the scenario to help the user app understand
the AMDGPU device status when an exception occurs.
v2:
change -NODEV to -EBUSY.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use int instead of uint32_t for 'ret' variable to store negative error
codes or zero returned by other functions.
Storing the negative error codes in unsigned type, doesn't cause an issue
at runtime but can be confusing. Additionally, assigning negative error
codes to unsigned type may trigger a GCC warning when the -Wsign-conversion
flag is enabled.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For ternary operators in the form of "a ? true : false", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For ternary operators in the form of "a ? true : false", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For ternary operators in the form of "a ? true : false", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For ternary operators in the form of "a ? true : false", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For ternary operators in the form of "a ? true : false", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code. Swap variable positions
on either side of '==' to enhance readability.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For ternary operators in the form of "a ? true : false", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code. Swap variable positions
on either side of '!=' to enhance readability.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For ternary operators in the form of "a ? true : false", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For ternary operators in the form of "a ? true : false" or
"a ? false : true", if 'a' itself returns a boolean result, the ternary
operator can be omitted. Remove redundant ternary operators to clean up the
code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add a detect and reset callback and add the implementation
for mes. The callback will detect all hung queues of a
particular ip type (e.g., GFX or compute or SDMA) and
reset them.
v2: increase reset counter and set fence force completion
v3: Removed userq_mutex in mes_userq_detect_and_reset since the driver holds it when calling
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use negative error code -EINVAL instead of positive EINVAL in the default
case of svm_ioctl() to conform to Linux kernel error code conventions.
Fixes: 42de677f7999 ("drm/amdkfd: register svm range")
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Cyan skillfish uses different SMU firmware.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Some SOCs which are part of the cyan skillfish family
rely on an explicit firmware for IP discovery. Add support
for the gpu_info firmware.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For platforms without an IP discovery table.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For chips that don't have IP discovery tables.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Align the function headers for `amdgpu_max_hdmi_pixel_clock` and
`amdgpu_connector_dvi_mode_valid` with the function implementations so
they match the expected kdoc style.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c:1199: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Returns the maximum supported HDMI (TMDS) pixel clock in KHz.
drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c:1212: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Validates the given display mode on DVI and HDMI connectors.
Fixes: 585b2f685c56 ("drm/amdgpu: Respect max pixel clock for HDMI and DVI-D (v2)")
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Current mem limit check leaks some GTT memory (reserved_for_pt
reserved_for_ras + adev->vram_pin_size) for small APUs.
Since carveout VRAM is tunable on APUs, there are three case
regarding the carveout VRAM size relative to GTT:
1. 0 < carveout < gtt
apu_prefer_gtt = true, is_app_apu = false
2. carveout > gtt / 2
apu_prefer_gtt = false, is_app_apu = false
3. 0 = carveout
apu_prefer_gtt = true, is_app_apu = true
It doesn't make sense to check below limitation in case 1
(default case, small carveout) because the values in the below
expression are mixed with carveout and gtt.
adev->kfd.vram_used[xcp_id] + vram_needed >
vram_size - reserved_for_pt - reserved_for_ras -
atomic64_read(&adev->vram_pin_size)
gtt: kfd.vram_used, vram_needed, vram_size
carveout: reserved_for_pt, reserved_for_ras, adev->vram_pin_size
In case 1, vram allocation will go to gtt domain, skip vram check
since ttm_mem_limit check already cover this allocation.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fixes a bug where unbinding of the GPU would leave the oem i2c adapter
registered resulting in a null pointer dereference when applications try
to access the invalid device.
Fixes: 3d5470c97314 ("drm/amd/display/dm: add support for OEM i2c bus")
Cc: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Geoffrey McRae <geoffrey.mcrae@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support for forcing completion of userq fences.
This is needed for userq resets and asic resets so that we
can set the error on the fence and force completion.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Track resets from user queues.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Implement support for the hung queue detect and reset
functionality.
v2: Always use AMDGPU_MES_SCHED_PIPE
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Implement support for the hung queue detect and reset
functionality.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Helper function to detect and reset hung queues. MES will
return an array of doorbell indices of which queues are hung
and were optionally reset.
v2: Clear the doorbell array before detection
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit implements the actual MES (Micro Engine Scheduler) suspend
and resume gang operations for version 12 hardware. Previously these
functions were just stubs returning success.
v2: Always use AMDGPU_MES_SCHED_PIPE
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
|
|
Add two new function pointers to struct amdgpu_userq_funcs:
- preempt: To handle preemption of user mode queues
- restore: To restore preempted user mode queues
These callbacks will allow the driver to properly manage queue
preemption and restoration when needed, such as during context
switching or priority changes.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Obvious driver patch plus update to sr to add back rotational media
flag since CDROMS are rotational"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sr: Reinstate rotational media flag
scsi: lpfc: Fix buffer free/clear order in deferred receive path
|
