| Age | Commit message (Collapse) | Author |
|---|
|
The check for the dart table index allowed values of
(1 << data->tbl_bits) while only as many entries are initialized in
apple_dart_alloc_pgtable. This results in an array out of bounds access
when data->tbl_bits is at its maximal value of 2. When data->tbl_bits is
0 or 1 an unset (initialized to zero) data->pgd[] entry is used. In both
cases the value is used as pointer to read page table entries and
results in dereferencing invalid pointers.
There is no prior check that the passed iova is inside the iommu's IAS
so invalid values can be passed from driver's calling iommu_map().
Fixes: 74a0e72f03ff ("iommu/io-pgtable-dart: Add 4-level page table support")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/asahi/aMACFlJjrZHs_Yf-@stanley.mountain/
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
The A523/T527 SoCs have a new MCU PRCM, which has more clocks and reset
controls for the RISC-V MCU and other peripherals. There is a second
audio PLL, but no bus clock dividers. The BSP driver uses the 24MHz main
oscillator as the parent for all the bus clocks. But the diagram
suggests busses from the other PRCM are used in this block as well.
Add a driver to support this part. Unlike the BSP driver, the SoC's main
MBUS clock is chosen as the parent for the MCU MBUS clock, and the
latter then serves as the parent of the MCU DMA controller's MBUS clock.
The bus gate clocks also use their respective bus clocks as parents
according to the system bus tree diagram. In cases where a block does
not appear in that diagram, an educated guess is made.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250911174710.3149589-6-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Some clocks (for timers) on the A523 are mux-divider-gate types
with the divider being values of power-of-two.
Add a macro for these types of clocks so that we can use the divider
types instead of the M-P types without an M divider.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250911174710.3149589-5-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The main clock controller on the A523/T527 has the NPU's module clock.
It was missing from the original submission, likely because that was
based on the A523 user manual; the A523 is marketed without the NPU.
Also, merge the private header back into the driver code itself. The
header only contains a macro containing the total number of clocks.
This has to be updated every time a missing clock gets added. Having
it in a separate file doesn't help the process. Instead just drop the
macro, and thus the header no longer has any reason to exist.
Also move the .num value to after the list of clks to make it obvious
that it should be updated when new clks are added.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250911174710.3149589-4-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
tasklet has been marked deprecated and it's planned to be
removed. Make omap crypto drivers to use BH workqueue which
is the new interface for executing in BH context in place
of tasklet.
Signed-off-by: Ryo Takakura <ryotkkr98@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Replace kzalloc() followed by copy_from_user() with memdup_user() to
improve and simplify adf_ctl_alloc_resources(). memdup_user() returns
either -ENOMEM or -EFAULT (instead of -EIO) if an error occurs.
Remove the unnecessary device id initialization, since memdup_user()
(like copy_from_user()) immediately overwrites it.
No functional changes intended other than returning the more idiomatic
error code -EFAULT.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
during entropy evaluation, if the generated samples fail
any statistical test, then, all of the bits will be discarded,
and a second set of samples will be generated and tested.
the entropy delay interval should be doubled before performing the
retry.
also, ctrlpriv->rng4_sh_init and inst_handles both reads RNG DRNG
status register, but only inst_handles is updated before every retry.
so only check inst_handles and removing ctrlpriv->rng4_sh_init
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
To prepare HMAC keys, just use the library functions instead of
crypto_shash. This is much simpler, avoids depending on the fragile
export_core and import_core methods, and is faster too.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
To prepare HMAC keys, just use the library functions instead of
crypto_shash. This is much simpler, avoids depending on the fragile
export_core and import_core methods, and is faster too.
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Change the 'ret' variable in tegra_sha_do_update() from unsigned int to
int, as it needs to store either negative error codes or zero returned
by tegra_se_host1x_submit().
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Change the 'ret' variable in sec_hw_init() from u32 to int, as
it needs to store either negative error codes or zero returned by
sec_ipv4_hashmask().
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Change the 'ret' variable in __sev_do_cmd_locked() from unsigned int to
int, as it needs to store negative error codes.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
payload_size field of the request header is incorrectly calculated using
sizeof(req). Since 'req' is a pointer (struct hsti_request *), sizeof(req)
returns the size of the pointer itself (e.g., 8 bytes on a 64-bit system),
rather than the size of the structure it points to. This leads to an
incorrect payload size being sent to the Platform Security Processor (PSP),
potentially causing the HSTI query command to fail.
Fix this by using sizeof(*req) to correctly calculate the size of the
struct hsti_request.
Signed-off-by: Yunseong Kim <ysk@kzalloc.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>> ---
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
It seems like everywhere in this file, dd->in_sg is mapped with
DMA_TO_DEVICE and dd->out_sg is mapped with DMA_FROM_DEVICE.
Fixes: 13802005d8f2 ("crypto: atmel - add Atmel DES/TDES driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned.
Fixes: 57d67c6e8219 ("crypto: rockchip - rework by using crypto_engine")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In order to make the ahash code more clear and modular, split the
monolithic sun8i_ce_hash_run() callback into two parts, prepare and
unprepare (therefore aligning it with the sun8i-ce skcipher code).
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Similar to sun8i-ce skcipher code, move all request-specific data to
request context. This simplifies sun8i_ce_hash_run() and it eliminates
the remaining kmalloc() calls from the digest path.
Since the 'result' buffer in the request ctx struct is used for from-device
DMA, it needs to be properly aligned to CRYPTO_DMA_ALIGN. Therefore:
- increase reqsize by CRYPTO_DMA_PADDING
- add __aligned(CRYPTO_DMA_ALIGN) attribute for the 'result' buffer
- convert all ahash_request_ctx_dma() calls to ahash_request_ctx_dma()
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
To remove some duplicated code, directly pass 'struct skcipher_request' and
'struct ce_task' pointers to sun8i_ce_cipher_{prepare,unprepare}.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fold sun8i_ce_cipher_run() into it's only caller, sun8i_ce_cipher_do_one(),
to eliminate a bit of boilerplate.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Currently, the iv buffers are allocated per flow during driver probe,
which means that the buffers are shared by all requests. This works
because the driver is not yet truly asynchronous, since it waits inside
do_one_request() for the completion irq.
However, the iv data is request-specific, so it should be part of the
request context. Move iv buffers to request context.
The bounce_iv buffer is aligned to sizeof(u32) to match the 'word address'
requirement for the task descriptor's iv field.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In order to remove code duplication, factor out task descriptor dumping to
a new function sun8i_ce_dump_task_descriptors().
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
There are 3 instances of '__maybe_unused' annotations that are not needed,
as the variables are always used, so remove them.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Retrieve the dev pointer from tfm context to eliminate some boilerplate
code in sun8i_ce_hash_digest().
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Tested-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Reviewed-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Using the number of bytes in the request as DMA timeout is really
inconsistent, as large requests could possibly set a timeout of
hundreds of seconds.
Remove the per-channel timeout field and use a single, static DMA
timeout of 3 seconds for all requests.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Tested-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Reviewed-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
__sev_platform_shutdown_locked()
When
9770b428b1a2 ("crypto: ccp - Move dev_info/err messages for SEV/SNP init and shutdown")
moved the error messages dumping so that they don't need to be issued by
the callers, it missed the case where __sev_firmware_shutdown() calls
__sev_platform_shutdown_locked() with a NULL argument which leads to
a NULL ptr deref on the shutdown path, during suspend to disk:
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 983 Comm: hib.sh Not tainted 6.17.0-rc4+ #1 PREEMPT(voluntary)
Hardware name: Supermicro Super Server/H12SSL-i, BIOS 2.5 09/08/2022
RIP: 0010:__sev_platform_shutdown_locked.cold+0x0/0x21 [ccp]
That rIP is:
00000000000006fd <__sev_platform_shutdown_locked.cold>:
6fd: 8b 13 mov (%rbx),%edx
6ff: 48 8b 7d 00 mov 0x0(%rbp),%rdi
703: 89 c1 mov %eax,%ecx
Code: 74 05 31 ff 41 89 3f 49 8b 3e 89 ea 48 c7 c6 a0 8e 54 a0 41 bf 92 ff ff ff e8 e5 2e 09 e1 c6 05 2a d4 38 00 01 e9 26 af ff ff <8b> 13 48 8b 7d 00 89 c1 48 c7 c6 18 90 54 a0 89 44 24 04 e8 c1 2e
RSP: 0018:ffffc90005467d00 EFLAGS: 00010282
RAX: 00000000ffffff92 RBX: 0000000000000000 RCX: 0000000000000000
^^^^^^^^^^^^^^^^
and %rbx is nice and clean.
Call Trace:
<TASK>
__sev_firmware_shutdown.isra.0
sev_dev_destroy
psp_dev_destroy
sp_destroy
pci_device_shutdown
device_shutdown
kernel_power_off
hibernate.cold
state_store
kernfs_fop_write_iter
vfs_write
ksys_write
do_syscall_64
entry_SYSCALL_64_after_hwframe
Pass in a pointer to the function-local error var in the caller.
With that addressed, suspending the ccp shows the error properly at
least:
ccp 0000:47:00.1: sev command 0x2 timed out, disabling PSP
ccp 0000:47:00.1: SEV: failed to SHUTDOWN error 0x0, rc -110
SEV-SNP: Leaking PFN range 0x146800-0x146a00
SEV-SNP: PFN 0x146800 unassigned, dumping non-zero entries in 2M PFN region: [0x146800 - 0x146a00]
...
ccp 0000:47:00.1: SEV-SNP firmware shutdown failed, rc -16, error 0x0
ACPI: PM: Preparing to enter system sleep state S5
kvm: exiting hardware virtualization
reboot: Power down
Btw, this driver is crying to be cleaned up to pass in a proper I/O
struct which can be used to store information between the different
functions, otherwise stuff like that will happen in the future again.
Fixes: 9770b428b1a2 ("crypto: ccp - Move dev_info/err messages for SEV/SNP init and shutdown")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Reviewed-by: Ashish Kalra <ashish.kalra@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This driver by now supports 17 different Microchip (formerly known as
Micrel) chips: KSZ9021, KSZ9031, KSZ9131, KSZ8001, KS8737, KSZ8021,
KSZ8031, KSZ8041, KSZ8051, KSZ8061, KSZ8081, KSZ8873MLL, KSZ886X,
KSZ9477, LAN8814, LAN8804 and LAN8841.
Support for the VSC8201 was removed in commit 51f932c4870f ("micrel phy
driver - updated(1)")
Update the help text to reflect that, list families instead of models to
ease future maintenance.
Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250911-micrel-kconfig-v2-1-e8f295059050@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for hardware timestamps in (e.g.) the PHY by calling
skb_tx_timestamp() as close as reasonably possible to the point that
the hardware is instructed to send the queued packets.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1uwKHe-00000004glk-3nkJ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
At the moment, the way that we currently free gem shmem objects is not
ideal for rust bindings. drm_gem_shmem_free() releases all of the
associated memory with a gem shmem object with kfree(), which means that
for us to correctly release a gem shmem object in rust we have to manually
drop all of the contents of our gem object structure in-place by hand
before finally calling drm_gem_shmem_free() to release the shmem resources
and the allocation for the gem object.
Since the only reason this is an issue is because of drm_gem_shmem_free()
calling kfree(), we can fix this by splitting drm_gem_shmem_free() out into
itself and drm_gem_shmem_release(), where drm_gem_shmem_release() releases
the various gem shmem resources without freeing the structure itself. With
this, we can safely re-acquire the KBox for the gem object's memory
allocation and let rust handle cleaning up all of the other struct members
automatically.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250911230147.650077-3-lyude@redhat.com
|
|
With gem objects in rust, the most ideal way for us to be able to handle
gem shmem object creation is to be able to handle the memory allocation of
a gem object ourselves - and then have the DRM gem shmem helpers initialize
the object we've allocated afterwards. So, let's split out
drm_gem_shmem_init() from drm_gem_shmem_create() to allow for doing this.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250911230147.650077-2-lyude@redhat.com
|
|
Add compatible and the hardware struct for Tegra256. Tegra256 controllers
use a different parent clock. Hence the timing parameters are different
from the previous generations to meet the expected frequencies.
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Starting with commit f99508074e78 ("PM: domains: Detach on
device_unbind_cleanup()"), there is no longer a need to call
dev_pm_domain_detach() in the bus remove function. The
device_unbind_cleanup() function now handles this to avoid
invoking devres cleanup handlers while the PM domain is
powered off, which could otherwise lead to failures as
described in the above-mentioned commit.
Drop the explicit dev_pm_domain_detach() call and rely instead
on the flags passed to dev_pm_domain_attach() to power off the
domain.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Remove existing arbitration timeout macros and use I2C adapter timeout
value for arbitration timeout and forceful bus ownership.
I2C adapter timeout can be configurable from user space, so using it
for arbitration timeout helps in configuring the arbitration timeout
from user space depending on the use case.
Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
dw_pcie_edma_irq_verify() already parses device tree for either "dma" (if
there is a single IRQ for all DMA channels) or "dmaX" (if there is one IRQ
per DMA channel), and initializes dma.nr_irqs accordingly.
Additionally, the probing of the eDMA driver will fail if neither "dma"
nor "dmaX" is defined in the device tree.
Therefore there is no need for a glue driver to specify edma.nr_irqs, so
remove the redundant edma.nr_irqs initialization.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: fix typos]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250908165914.547002-4-cassel@kernel.org
|
|
dw_pcie_edma_irq_verify() is supposed to verify the eDMA IRQs in devicetree
by fetching them using either 'dma' or 'dmaX' IRQ names. Former is used
when the platform uses a single IRQ for all eDMA channels and latter is
used when the platform uses separate IRQ per channel. But currently,
dw_pcie_edma_irq_verify() bails out early if edma::nr_irqs is 1, i.e., when
a single IRQ is used. This gives an impression that the driver could work
with any single IRQ in devicetree, not necessarily with name 'dma'.
But dw_pcie_edma_irq_vector(), which actually requests the IRQ, does
require the single IRQ to be named as 'dma'. So this creates inconsistency
between dw_pcie_edma_irq_verify() and dw_pcie_edma_irq_vector().
Thus, to fix this inconsistency, make sure dw_pcie_edma_irq_verify() also
verifies the single IRQ name by removing the bail out code.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
[mani: reworded subject and description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: fix typos]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250908165914.547002-3-cassel@kernel.org
|
|
The doorbell feature temporarily overrides the inbound translation to point
to the address stored in epf_test->db_bar.phys_addr, i.e., it calls
set_bar() twice without ever calling clear_bar(), as calling clear_bar()
would clear the BAR's PCI address assigned by the host.
Thus, when disabling the doorbell, restore the inbound translation to point
to the memory allocated for the BAR.
Without this, running the PCI endpoint kselftest doorbell test case more
than once would fail.
Fixes: eff0c286aa91 ("PCI: endpoint: pci-epf-test: Add doorbell test support")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250908161942.534799-2-cassel@kernel.org
|
|
Some interrupt controllers require an #address-cells property in their
bindings without requiring a "reg" property to be present.
The current logic used to craft an interrupt-map property in
of_pci_prop_intr_map() is based on reading the #address-cells
property in the interrupt-parent and, if != 0, read the interrupt
parent "reg" property to determine the parent unit address to be
used to create the parent unit interrupt specifier.
First of all, it is not correct to read the "reg" property of
the interrupt-parent with an #address-cells value taken from the
interrupt-parent node, because the #address-cells value define the
number of address cells required by child nodes.
More importantly, for all modern interrupt controllers, the parent
unit address is irrelevant in hardware in relation to the
device <-> interrupt-controller connection and the kernel actually
ignores the parent unit address value when hierarchically parsing
the interrupt-map property (i.e., of_irq_parse_raw()).
For the reasons above, remove the code parsing the interrupt parent "reg"
property in of_pci_prop_intr_map() -- it is not needed and prevents
interrupt-map property generation on systems with an interrupt-controller
that has no "reg" property in its interrupt-controller node -- and leave
the parent unit address always initialized to 0 since it is simply ignored
by the kernel.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/lkml/aJms+YT8TnpzpCY8@lpieralisi/
Link: https://patch.msgid.link/20250818093504.80651-1-lpieralisi@kernel.org
|
|
Do not kfree the intel_dg_nvm_dev in xe_nvm_fini() right after
auxiliary_device_delete/uninit. The auxiliary_device embeds the
device/kobject (and its name); freeing it too early can race
with asynchronous device_del/udev processing and cause a use-after-free.
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Fixes: c28bfb107dac ("drm/xe/nvm: add on-die non-volatile memory device")
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250911052823.226696-1-nitin.r.gote@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fix from Bjorn Helgaas:
- Fix mvebu PCI enumeration regression caused by converting to
for_each_of_range() iterator (Klaus Kudielka)
* tag 'pci-v6.17-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: mvebu: Fix use of for_each_of_range() iterator
|
|
Fix this warning while building the documentation:
Documentation/gpu/xe/xe_configfs:9: drivers/gpu/drm/xe/xe_configfs.c:138:
WARNING: Definition list ends without a blank line; unexpected unindent.
That also makes it better formatted in the output.
While at it, also fix the underline length in "Overview".
Fixes: e2b33fce5eb0 ("drm/xe/configfs: Improve documentation steps")
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://lore.kernel.org/r/20250911-wa-bb-cmds-v4-2-c8f7e48f7eae@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Bring it up to reality, better documenting the existing batch buffers,
OOB rules and fixing some typos.
Bspec: 60122
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250911-wa-bb-cmds-v4-1-c8f7e48f7eae@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Pull drm fixes from Dave Airlie:
"Weekly pull fixes for drm, mostly amdgpu and xe, with a revert for
nouveau and some maintainers updates, and misc bits, doesn't seem too
out of the normal.
MAINTAINERS:
- add rust tree to MAINTAINERS
- fix X entries for nova/nouveau
nova:
- depend on 64-bit
i915:
- Fix size for for_each_set_bit() in abox iteration
xe:
- Don't touch survivability_mode on fini
- Fixes around eviction and suspend
- Extend Wa_13011645652 to PTL-H, WCL
amdgpu:
- PSP 11.x fix
- DPCD quirk handing fix
- DCN 3.5 PG fix
- Audio suspend fix
- OEM i2c clean up fix
- Module unload memory leak fix
- DC delay fix
- ISP firmware fix
- VCN fixes
amdkfd:
- P2P topology fix
- APU mem limit calculation fix
mediatek:
- fix potential OF node use-after-free
panthor:
- out-of-bounds check
nouveau:
- revert waitqueue removal for sched teardown
* tag 'drm-fixes-2025-09-12' of https://gitlab.freedesktop.org/drm/kernel: (25 commits)
MAINTAINERS: drm-misc: fix X: entries for nova/nouveau
drm/mediatek: clean up driver data initialisation
drm/mediatek: fix potential OF node use-after-free
drm/amdgpu/vcn: Allow limiting ctx to instance 0 for AV1 at any time
drm/amdgpu/vcn4: Fix IB parsing with multiple engine info packages
drm/amd/amdgpu: Declare isp firmware binary file
drm/amd/display: use udelay rather than fsleep
drm/amdgpu: fix a memory leak in fence cleanup when unloading
drm/xe: Extend Wa_13011645652 to PTL-H, WCL
drm/xe: Block exec and rebind worker while evicting for suspend / hibernate
drm/xe: Allow the pm notifier to continue on failure
drm/xe: Attempt to bring bos back to VRAM after eviction
drm/xe/configfs: Don't touch survivability_mode on fini
amd/amdkfd: correct mem limit calculation for small APUs
drm/amdkfd: fix p2p links bug in topology
drm/amd/display: remove oem i2c adapter on finish
drm/amd/display: Drop dm_prepare_suspend() and dm_complete()
drm/amd/display: Correct sequences and delays for DCN35 PG & RCG
drm/amd/display: Disable DPCD Probe Quirk
drm/i915/power: fix size for for_each_set_bit() in abox iteration
...
|
|
When the watchdog gets enabled with this driver, it leaves enough time
for the core watchdog subsystem to start pinging it. But when the
watchdog is already started by hardware or by the boot loader, little
time remains before it fires and it happens that the core watchdog
subsystem doesn't have time to start pinging it.
Until commit 19ce9490aa84 ("watchdog: mpc8xxx: use the core worker
function") pinging was managed by the driver itself and the watchdog
was immediately pinged by setting the timer expiry to 0.
So restore similar behaviour by pinging it when enabling it so that
if it was already enabled the watchdog timer counter is reloaded.
Fixes: 19ce9490aa84 ("watchdog: mpc8xxx: use the core worker function")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The watchdog core will handle error messages already.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.x90@mail.toshiba>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The watchdog core will handle error messages already.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The watchdog core will handle error messages already.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Enable supported features for ExynosAutov9 SoC.
- QUIRK_HAS_DBGACK_BIT
- QUIRK_HAS_32BIT_CNT
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Sangwook Shin <sw617.shin@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Enable QUIRK_HAS_32BIT_CNT to ExynosAutov920 SoC which has 32-bit WTCNT.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Sangwook Shin <sw617.shin@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Increase max_timeout value from 55s to 3665038s (1018h 3min 58s) with
38400000 frequency system if the system has 32-bit WTCNT register.
cat /sys/class/watchdog/watchdog0/max_timeout
3665038
[ 0.330082] s3c2410-wdt 10060000.watchdog_cl0: Heartbeat: count=1099511400000, timeout=3665038, freq=300000
[ 0.330087] s3c2410-wdt 10060000.watchdog_cl0: Heartbeat: timeout=3665038, divisor=256, count=1099511400000 (fffffc87)
[ 0.330127] s3c2410-wdt 10060000.watchdog_cl0: starting watchdog timer
[ 0.330134] s3c2410-wdt 10060000.watchdog_cl0: Starting watchdog: count=0xfffffc87, wtcon=0001ff39
[ 0.330319] s3c2410-wdt 10060000.watchdog_cl0: watchdog active, reset enabled, irq disabled
If the system has a 32-bit WTCNT, add QUIRK_HAS_32BIT_CNT to its quirk flags,
and it will operate with a 32-bit counter. If not, it will operate with a 16-bit
counter like in the previous version.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Sangwook Shin <sw617.shin@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Fix the issue of max_timeout being calculated larger than actual value.
The calculation result of freq / (S3C2410_WTCON_PRESCALE_MAX + 1) /
S3C2410_WTCON_MAXDIV is smaller than the actual value because the remainder
is discarded during the calculation process. This leads to a larger
calculated value for max_timeout compared to the actual settable value.
To resolve this issue, the order of calculations in the computation process
has been adjusted.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Sangwook Shin <sw617.shin@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Modify the code to utilize macro-defined values instead of hardcoded
values. The value 0x100 in the s3c2410wdt_set_heartbeat function represents
S3C2410_WTCON_PRESCALE_MAX + 1, but it is hardcoded, making its meaning
difficult to understand and reducing code readability.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Sangwook Shin <sw617.shin@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
