| Age | Commit message (Collapse) | Author |
|---|
|
Move the call to stmmac_init_timestamping() or stmmac_setup_ptp() out
of stmmac_hw_setup() to its caller after stmmac_hw_setup() has
successfully completed. This slightly changes the ordering during
setup, but should be safe to do.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the PTP support check from stmmac_init_tstamp_counter() into
stmmac_init_timestamping() as it makes more sense to be there.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a function to setup PTP, which will enable the clock, initialise
the timestamping, and register with the PTP clock subsystem. Call this
when we want to register the PTP clock in stmmac_hw_setup(), otherwise
just call the
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Changes to the stmmac driver to fix various issues with PTP have made
stmmac_init_ptp() less about initialising the entire PTP block, and
now primarily deals with the packet timestamping support. The exception
to this is ptp_clk_freq_config(), which is an odditiy. It remains
as stmmac_init_ptp() is used both at .ndo_open() time and in the
resume paths.
However, restructuring this code to make it more easily readable makes
the continued use of "init_ptp" confusing.
In preparation to cleaning up the (re-)initialisation of timestamping,
rename the existing stmmac_init_ptp() to stmmac_init_timestamping()
which better reflects its functionality.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the stmmac_init_ptp() messages from stmmac_hw_setup() to
stmmac_init_ptp(), which will allow further cleanups.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rename stmmac_release() to __stmmac_release(), providing a new
stmmac_release() method. Update stmmac_change_mtu() to use
__stmmac_release(). Move the runtime PM handling into stmmac_open()
and stmmac_release().
This avoids stmmac_change_mtu() needlessly fiddling with the runtime
PM state, and will allow future changes to remove code from
__stmmac_open() and __stmmac_release() that should only happen when
the net device is administratively brought up or down.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Nothing outside of stmmac_main.c makes use of
stmmac_init_tstamp_counter(), so there's no point exporting it for
modules, or even having it non-static. Remove the export and make
it static.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Neither stmmac_xdp_release() nor the normal paths of stmmac_xdp_open()
touch clk_ptp_ref, so stmmac_xdp_open() should not be doing anything
with this clock. However, in its error path, it calls
stmmac_hw_teardown() which disables and unprepares this clock, which
can lead to the clock state becoming unbalanced when the netdev is
taken administratively down.
Remove this call to stmmac_hw_teardown(), and as this is the last user
of this function, remove the function as well.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The cleanup function for stmmac_setup_ptp() is stmmac_release_ptp()
which entirely undoes the effects of stmmac_setup_ptp() by
unregistering the PTP device and then stopping the PTP clock,
whereas stmmac_hw_teardown() will only stop the PTP clock while
leaving the PTP device registered.
This can lead to a kernel oops - if __stmmac_open() fails after
registering the PTP clock, the PTP device will remain registered,
and if the module is removed, subsequent PTP device accesses will
lead to a kernel oops.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Follow the principle of unpublish from userspace and then teardown
resources.
Disable the PTP clock only after unregistering with the PTP subsystem,
which ensures that we only stop the clock that ticks the timesource
after we have removed the PTP device.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The aux_ts_lock mutex is only required while the PTP clock has been
successfully registered.
stmmac_ptp_register() does not return any errors (as we don't wish to
prevent the netdev being opened if PTP fails), stmmac_ptp_unregister()
was coded to allow it to be called irrespective of whether PTP was
successfully registered or not.
Arrange for the aux_ts_lock mutex to be destroyed if the PTP clock
is not functional during stmmac_ptp_register(), and only destroy it
in stmmac_ptp_unregister() if we had a PTP clock registered.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mv88e6352_config_eventcap() is documented as handling both EXTTS and
PPS capture modes, but nothing ever calls it for PPS capture. Remove
the unused PPS capture mode support, and the now unused
MV88E6XXX_TAI_EVENT_STATUS_CAP_TRIG definition.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1uwep9-00000004ikJ-2FeF@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
evcap_config is only read and written in mv88e6352_config_eventcap(),
so it makes little sense to store it in the global chip struct. Make
it a local variable instead.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1uwep4-00000004ikD-1ZEh@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
chip->trig_config is never written, and thus takes the value zero.
Remove this struct member and its single reader.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1uweoz-00000004ik7-13Fl@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mv88e6250_ptp_ops and mv88e6352_ptp_ops are identical since commit
7e3c18097a70 ("net: dsa: mv88e6xxx: read cycle counter period from
hardware"). Remove the unnecessary duplication.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1uweou-00000004ik1-0aiX@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If HW Channel (HWC) is not responding, reduce the waiting time, so further
steps will fail quickly.
This will prevent getting stuck for a long time (30 minutes or more), for
example, during unloading while HWC is not responding.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1757537841-5063-1-git-send-email-haiyangz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend the Renesas GBETH stmmac glue driver to support the RZ/T2H SoC,
where the GMAC is connected through a MIIC PCS. Introduce a new
`has_pcs` flag in `struct renesas_gbeth_of_data` to indicate when PCS
handling is required.
When enabled, the driver parses the `pcs-handle` phandle, creates a PCS
instance with `miic_create()`, and wires it into phylink. Proper cleanup
is done with `miic_destroy()`. New init/exit/select hooks are added to
`plat_stmmacenet_data` for PCS integration.
Update Kconfig to select `PCS_RZN1_MIIC` when building the Renesas GBETH
driver so the PCS support is always available.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20250908105901.3198975-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Prepare for adding RZ/T2H SoC support by making the driver configuration
selectable via OF match data. While the RZ/V2H(P) and RZ/T2H use the same
version of the Synopsys DesignWare MAC (version 5.20), the hardware is
synthesized with different options. To accommodate these differences,
introduce a struct holding per-SoC configuration such as clock list,
number of clocks, TX clock rate control, and STMMAC flags, and retrieve
it from the device tree match entry during probe.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20250908105901.3198975-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.17-rc6 that
resolve some reported problems. Included in here are:
- 8250 driver dt bindings fixes
- broadcom serial driver binding fixes
- hvc_console bugfix
- xilinx serial driver bugfix
- sc16is7xx serial driver bugfix
All of these have been in linux-next for the past week with no
reported issues"
* tag 'tty-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: xilinx_uartps: read reg size from DTS
tty: hvc_console: Call hvc_kick in hvc_write unconditionally
dt-bindings: serial: 8250: allow "main" and "uart" as clock names
dt-bindings: serial: 8250: move a constraint
dt-bindings: serial: brcm,bcm7271-uart: Constrain clocks
serial: sc16is7xx: fix bug in flow control levels init
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 6.17-rc6.
Included in here are:
- new usb-serial driver device ids
- dummy-hcd locking bugfix for rt-enabled systems (which is crazy,
but people have odd testing requirements at times...)
- xhci driver bugfixes for reported issues
- typec driver bugfix
- midi2 gadget driver bugfixes
- usb core sysfs file regression fix from -rc1
All of these, except for the last usb sysfs file fix, have been in
linux-next with no reported issues. The sysfs fix was added to the
tree on Friday, and is "obviously correct" and should not have any
problems either, it just didn't have any time for linux-next to pick
up (0-day had no problems with it)"
* tag 'usb-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: core: remove the move buf action
usb: gadget: midi2: Fix MIDI2 IN EP max packet size
usb: gadget: midi2: Fix missing UMP group attributes initialization
usb: typec: tcpm: properly deliver cable vdms to altmode drivers
USB: gadget: dummy-hcd: Fix locking bug in RT-enabled kernels
xhci: fix memory leak regression when freeing xhci vdev devices depth first
xhci: dbc: Fix full DbC transfer ring after several reconnects
xhci: dbc: decouple endpoint allocation from initialization
USB: serial: option: add Telit Cinterion LE910C4-WWX new compositions
USB: serial: option: add Telit Cinterion FN990A w/audio compositions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a quirk to i8042 for yet another TUXEDO laptop
- a fix to mtk-pmic-keys driver to properly handle MT6359
- a fix to iqs7222 driver to only enable proximity interrupt
if it is mapped to a key or a switch event
- an update to xpad controller driver to recognize Flydigi Apex 5
controller
- an update to maintainers file to drop bounding entry for Melfas
touch controller
* tag 'input-for-v6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
MAINTAINERS: Input: Drop melfas-mip4 section
Input: mtk-pmic-keys - MT6359 has a specific release irq
Input: i8042 - add TUXEDO InfinityBook Pro Gen10 AMD to i8042 quirk table
Input: iqs7222 - avoid enabling unused interrupts
Input: xpad - add support for Flydigi Apex 5
|
|
Rename regValue to reg_value to follow kernel coding style.
Signed-off-by: Ahmet Sezgin Duran <ahmet@sezginduran.net>
Link: https://lore.kernel.org/r/20250912162627.95010-1-ahmet@sezginduran.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Make the function definition of phy_StoreTxPowerByRateBase() follow the
kernel coding style by placing the return type and function name on a
single line.
No functional change.
Signed-off-by: Akiyoshi Kurita <weibu@redadmin.org>
Link: https://lore.kernel.org/r/20250912162613.776769-1-weibu@redadmin.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On Apple Silicon machines there is no control over which alt mode is
chosen. The CD321x' firmware negotiates the target mode on its own and
only lets the main CPU know after the mode has already been chosen.
Especially after plugging a new cable in this can result to quick mode
changes from e.g. power only -> USB3 only -> USB3+DisplayPort in a short
time. It is not possile to influence this in any way and we also do not
get direct access to the PDOs or VDOs exchanged via USB PD.
Additionally, mode changes must be tightly synchronized between DWC3 and
the Type C PHY and most mode changes require a full reset of DWC3 to
make the port work correctly.
This is all done synchronously from the role switch handler inside the
DWC3 glue driver on these machines to avoid tripping any failsafes or
watchdogs inside the Type-C PHY that may, in the worst case, reset the
entire SoC.
To be able to control all this we trigger the entire process in the
correct order directly from the TIPD driver and de-bounce any mode
changes to avoid tearing down and re-setting DWC3 back up multiple times
any time a new connection is made.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Co-developed-by: Sven Peter <sven@kernel.org>
Signed-off-by: Sven Peter <sven@kernel.org>
Reviewed-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-11-4e99c8649024@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Just like for power status we also need to keep track of data status to
be able to detect mode changes once we introduce de-bouncing for CD321x.
Read it during probe and keep a cached copy of its value.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-10-4e99c8649024@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the initial power status to be able to reliably detect connector
changes once we introduce de-bouncing for CD321x next. read_power_status
takes care of this and also forwards the status to the trace subsystem
so let's use that instead of open-coding it inside probe.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-9-4e99c8649024@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Whenever the power status is changed make sure to also update the
partner identity to be able to detect changes once de-bouncing and mode
changes are added for CD321x.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-8-4e99c8649024@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Ports equipped with a CD321x are only found on Apple Silicon machines
and always support DisplayPort, Thunderbolt and USB4. Register these
port modes unconditionally.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-7-4e99c8649024@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
CD321x supports various alternate modes and stores information once
these are entered into separate status registers. Read those when they
are active when reading TPS_DATA_STATUS to prepare supporting these.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-6-4e99c8649024@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We're about to add more fields to struct tps6598x which are only relevant
for Apple's CD321x and to ensure that we don't waste memory everywhere for
those add a separate struct for cd321x and prepare to allocate more space
inside probe.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-5-4e99c8649024@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some bits inside the CD321x TPS_DATA_STATUS register have a different
function compared to the original tipd chip. Add these and introduce a
separate trace function to show them correctly.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-4-4e99c8649024@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When support for CD321x was originally added no other hardware variant
was supported and there was no need for struct tipd_data. Now that it
exists move the special case in there so that we can drop the
of_device_is_compatible_check entirely.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-3-4e99c8649024@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since the irq mask was originally added more tipd variants have been
introduced and there's now struct tipd_data. Move the initial mask in
there.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-2-4e99c8649024@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Right now the interrupt handler first reads all updated status registers
and only then clears the interrupts. It's possible that a duplicate
interrupt for a changed register or plug state comes in after the
interrupts have been processed but before they have been cleared:
* plug is inserted, TPS_REG_INT_PLUG_EVENT is set
* TPS_REG_INT_EVENT1 is read
* tps6598x_handle_plug_event() has run and registered the plug
* plug is removed again, TPS_REG_INT_PLUG_EVENT is set (again)
* TPS_REG_INT_CLEAR1 is written, TPS_REG_INT_PLUG_EVENT is cleared
We then have no plug connected and no pending interrupt but the tipd
core still thinks there is a plug. It's possible to trigger this with
e.g. a slightly broken Type-C to USB A converter.
Fix this by first clearing the interrupts and only then reading the
updated registers.
Fixes: 45188f27b3d0 ("usb: typec: tipd: Add support for Apple CD321X")
Fixes: 0a4c005bd171 ("usb: typec: driver for TI TPS6598x USB Power Delivery controllers")
Cc: stable@kernel.org
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-1-4e99c8649024@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Extend the Tegra124 DFLL driver to include configuration settings
required for Tegra114 compatibility.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
[treding@nvidia.com: Use TEGRA210 instead of T210]
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The `cros_ec_keyb` driver can be probed before the cros_ec_device has
completed the registration. This creates a race condition where
`cros_ec_keyb` might access uninitialized data.
Fix this by calling `cros_ec_device_registered()` to check the parent's
status. If the device is not yet ready, return -EPROBE_DEFER to ensure
the probe is retried later.
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20250828083601.856083-6-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
Introduce a `registered` flag to the `struct cros_ec_device` to allow
callers to determine if the device has been fully registered and is
ready for use.
This is a preparatory step to prevent race conditions where other drivers
might try to access the device before it is fully registered or after
it has been unregistered.
Link: https://lore.kernel.org/r/20250828083601.856083-5-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
Move the initialization of the `struct cros_ec_device` from
cros_ec_register() into cros_ec_device_alloc().
This decouples device initialization from registration. By doing so,
the per-device lock is now available immediately after allocation,
allowing it to be used safely even before the device is fully
registered.
Link: https://lore.kernel.org/r/20250828083601.856083-4-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
Move the common initialization from protocol device drivers into central
cros_ec_device_alloc().
This removes duplicated code from each driver's probe function.
The buffer sizes are now calculated once, using the maximum possible
overhead required by any of the transport protocols, ensuring the
allocated buffers are sufficient for all cases.
Link: https://lore.kernel.org/r/20250828083601.856083-3-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
Introduce a helper function, cros_ec_device_alloc(), to centralize the
allocation of the struct cros_ec_device. Convert all protocol device
drivers to use this new function.
This is a preparatory step for separating common initialization logic
out of device drivers' probe() and cros_ec_register().
Link: https://lore.kernel.org/r/20250828083601.856083-2-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
When KHO (Kexec HandOver) is enabled, it sets up scratch memory regions
early during device tree scanning. After kexec, the new kernel
exclusively uses this region for memory allocations during boot up to the
initialization of the page allocator
However, when booting with EFI, EFI's reserve_regions() uses
memblock_remove(0, PHYS_ADDR_MAX) to clear all memory regions before
rebuilding them from EFI data. This destroys KHO scratch regions and
their flags, thus causing a kernel panic, as there are no scratch memory
regions.
Instead of wholesale removal, iterate through memory regions and only
remove non-KHO ones. This preserves KHO scratch regions, which are good
known memory, while still allowing EFI to rebuild its memory map.
Link: https://lkml.kernel.org/r/b34da9fd50c89644cd4204136cfa6f5533445c56.1755721529.git.epetron@amazon.de
Signed-off-by: Evangelos Petrongonas <epetron@amazon.de>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Changyuan Lyu <changyuanl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Update the fbcon_skip_panic() function to use the panic_in_progress()
helper.
The previous direct access to panic_cpu is less readable and is being
replaced by a dedicated function that more clearly expresses the intent.
This change is part of a series to refactor the kernel's panic handling
logic for better clarity and robustness.
Link: https://lkml.kernel.org/r/20250825022947.1596226-3-wangjinchao600@gmail.com
Signed-off-by: Jinchao Wang <wangjinchao600@gmail.com>
Acked-by Qianqiang Liu <qianqiang.liu@163.com>
Cc: Anna Schumaker <anna.schumaker@oracle.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Young <dyoung@redhat.com>
Cc: Doug Anderson <dianders@chromium.org>
Cc: "Guilherme G. Piccoli" <gpiccoli@igalia.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: Joel Granados <joel.granados@kernel.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Kees Cook <kees@kernel.org>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Luo Gengkun <luogengkun@huaweicloud.com>
Cc: Max Kellermann <max.kellermann@ionos.com>
Cc: Nam Cao <namcao@linutronix.de>
Cc: oushixiong <oushixiong@kylinos.cn>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Sohil Mehta <sohil.mehta@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Thomas Zimemrmann <tzimmermann@suse.de>
Cc: Thorsten Blum <thorsten.blum@linux.dev>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Yunhui Cui <cuiyunhui@bytedance.com>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If register_node() returns an error, it is not handled correctly.
The function will proceed further and try to register CPUs under the
node, which is not correct.
So, in this patch, if register_node() returns an error, we return
immediately from the function.
Link: https://lkml.kernel.org/r/20250822084845.19219-1-donettom@linux.ibm.com
Fixes: 76b67ed9dce6 ("[PATCH] node hotplug: register cpu: remove node struct")
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Donet Tom <donettom@linux.ibm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hiroyouki Kamezawa <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
... and hide it behind a kconfig option. There is really no need for any
!xen code to perform this check.
The naming is a bit off: we want to find the "normal" page when a PTE was
marked "special". So it's really not "finding a special" page.
Improve the documentation, and add a comment in the code where XEN ends up
performing the pte_mkspecial() through a hypercall. More details can be
found in commit 923b2919e2c3 ("xen/gntdev: mark userspace PTEs as special
on x86 PV guests").
Link: https://lkml.kernel.org/r/20250811112631.759341-12-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Juegren Gross <jgross@suse.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
At this point MIGRATEPAGE_SUCCESS is misnamed for all folio users,
and now that we remove MIGRATEPAGE_UNMAP, it's really the only "success"
return value that the code uses and expects.
Let's just get rid of MIGRATEPAGE_SUCCESS completely and just use "0"
for success.
Link: https://lkml.kernel.org/r/20250811143949.1117439-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com> [mm]
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com> [jfs]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Byungchul Park <byungchul@sk.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Kleikamp <shaggy@kernel.org>
Cc: Eugenio Pé rez <eperezma@redhat.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Lance Yang <lance.yang@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
sysfs handlers should be called under ->init_lock and are not supposed to
unlock it until return, otherwise e.g. a concurrent reset() can occur.
There is one handler that breaks that rule: recomp_algorithm_show().
Move ->init_lock handling outside of __comp_algorithm_show() (also drop it
and call zcomp_available_show() directly) so that the entire
recomp_algorithm_show() loop is protected by the lock, as opposed to
protecting individual iterations.
The patch does not need to go to -stable, as it does not fix any
runtime errors (at least I can't think of any). It makes
recomp_algorithm_show() "atomic" w.r.t. zram reset() (just like the
rest of zram sysfs show() handlers), that's a pretty minor change.
Link: https://lkml.kernel.org/r/20250805101946.1774112-1-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reported-by: Seyediman Seyedarab <imandevel@gmail.com>
Suggested-by: Seyediman Seyedarab <imandevel@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Attempt to map aligned to huge page size for private mapping which could
achieve performance gains, the mprot_tw4m in libMicro average execution
time on arm64:
- Test case: mprot_tw4m
- Before the patch: 22 us
- After the patch: 17 us
If THP config is not set, we fall back to system page size mappings.
Link: https://lkml.kernel.org/r/20250731122305.2669090-1-zhangqilong3@huawei.com
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Tested-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"One fix for sy7636a which got confused about which device to use to
manage the lifecycle of the power good GPIO because it's looked up
from the parent device due to the way DT bindings work"
* tag 'regulator-fix-v6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: sy7636a: fix lifecycle of power good gpio
|
|
Introduce rcar_canfd_compute_data_bit_rate_cfg() for simplifying data bit
rate configuration by replacing function-like macros.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20250908120940.147196-5-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Introduce rcar_canfd_compute_nominal_bit_rate_cfg() for simplifying
nominal bit rate configuration by replacing function-like macros.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20250908120940.147196-4-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
