| Age | Commit message (Collapse) | Author |
|---|
|
Make sure the headers are sorted alphabetically to ensure consistent
code.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250623-simple-drm-fb-icc-v2-4-f69b86cd3d7d@fairphone.com
|
|
Make sure the headers are sorted alphabetically to ensure consistent
code.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Several fbdev drivers select FB_MODE_HELPER in the Kconfig. The
setting controls some helper functions and has no meaning to the
user. Make it an internal option.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250909132047.152612-3-tzimmermann@suse.de
|
|
The option CONFIG_FB_TILEBLITTING is controlled by the user. Selecting
it from drivers can lead to cyclic dependencies within the config. In
fbcon, there's special handling for tile blitting, which currently
cannot be disabled without first disabling the relevant fbdev drivers.
Fix the Kconfig dependency to make it work.
Some guidelines for using select can be found in the kernel docs at [1].
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://elixir.bootlin.com/linux/v6.16/source/Documentation/kbuild/kconfig-language.rst#L147 # [1]
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250909132047.152612-2-tzimmermann@suse.de
|
|
In the ACPI debugger interface, the helper functions for read and write
operations use "int" as the length parameter data type. When a large
"size_t count" is passed from the file operations, this cast to "int"
results in truncation and a negative value due to signed integer
representation.
Logically, this negative number propagates to the min() calculation,
where it is selected over the positive buffer space value, leading to
unexpected behavior. Subsequently, when this negative value is used in
copy_to_user() or copy_from_user(), it is interpreted as a large positive
value due to the unsigned nature of the size parameter in these functions,
causing the copy operations to attempt handling sizes far beyond the
intended buffer limits.
Address the issue by:
- Changing the length parameters in acpi_aml_read_user() and
acpi_aml_write_user() from "int" to "size_t", aligning with the
expected unsigned size semantics.
- Updating return types and local variables in acpi_aml_read() and
acpi_aml_write() to "ssize_t" for consistency with kernel file
operation conventions.
- Using "size_t" for the "n" variable to ensure calculations remain
unsigned.
- Using min_t() for circ_count_to_end() and circ_space_to_end() to
ensure type-safe comparisons and prevent integer overflow.
Signed-off-by: Amir Mohammad Jahangirzad <a.jahangirzad@gmail.com>
Link: https://patch.msgid.link/20250923013113.20615-1-a.jahangirzad@gmail.com
[ rjw: Changelog tweaks, local variable definitions ordering adjustments ]
Fixes: 8cfb0cdf07e2 ("ACPI / debugger: Add IO interface to access debugger functionalities")
Cc: 4.5+ <stable@vger.kernel.org> # 4.5+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Move the cpuidle driver check from __acpi_processor_start() to
acpi_processor_power_init() which allows variable acpi_idle_driver to
become static.
No intentional functional impact.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Link: https://patch.msgid.link/20250923032428.2656329-2-lihuisong@huawei.com
[ rjw: Subject tweak, new changelog, adjustment of a new comment ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
For some coresight components like CTI and TPDM, there could be
numerous of them. From the node name, we can only get the type and
register address of the component. We can't identify the HW or the
system the component belongs to. Add label sysfs node support for
showing the intuitive name of the device.
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250816072529.3716968-3-quic_jinlmao@quicinc.com
|
|
Add the new AMBA ID 0x001f0c00 to support Trace Noc V2 instances.
Signed-off-by: Yuanfang Zhang <yuanfang.zhang@oss.qualcomm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250814-tnoc_v2-v1-1-3285e37280c9@oss.qualcomm.com
|
|
The return value of devm_kzalloc could be an null pointer,
use "!desc.pdata" to fix incorrect handling return value
of devm_kzalloc.
Fixes: 4277f035d227 ("coresight: trbe: Add a representative coresight_platform_data for TRBE")
Signed-off-by: Lin Yujun <linyujun809@h-partners.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250908122022.1315399-1-linyujun809@h-partners.com
|
|
Some TPDM devices support both CMB and DSB datasets, requiring
the system to enable the port with both corresponding element sizes.
Currently, the logic treats tpdm_read_element_size as successful if
the CMB element size is retrieved correctly, regardless of whether
the DSB element size is obtained. This behavior causes issues
when parsing data from TPDM devices that depend on both element sizes.
To address this, the function should explicitly fail if the DSB
element size cannot be read correctly.
Fixes: e6d7f5252f73 ("coresight-tpda: Add support to configure CMB element")
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250906-fix_element_size_issue-v2-1-dbb0ac2541a9@oss.qualcomm.com
|
|
When the TRBE driver fails to allocate a buffer, it currently returns
the error code "-ENOMEM". However, the caller etm_setup_aux() only
checks for a NULL pointer, so it misses the error. As a result, the
driver continues and eventually causes a kernel panic.
Fix this by returning a NULL pointer from arm_trbe_alloc_buffer() on
allocation failures. This allows that the callers can properly handle
the failure.
Fixes: 3fbf7f011f24 ("coresight: sink: Add TRBE driver")
Reported-by: Tamas Zsoldos <tamas.zsoldos@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250904-cs_etm_auxsetup_fix_error_handling-v2-1-a502d0bafb95@arm.com
|
|
The validation for driver data pointers and clock pointers are redundant
in the runtime PM callbacks. After a driver's probing, its driver data
and clocks have been initialized successfully, this ensures it is safe
to access driver data and clocks in the runtime PM callbacks. A corner
case is a clock pointer is NULL, in this case, the clock core layer can
handle it properly. So remove these redundant checking.
In runtime resume, respect values returned from clock function and add
error handling.
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250731-arm_cs_fix_clock_v4-v6-10-1dfe10bb3f6f@arm.com
|
|
Since atclk is enabled after pclk during the probe phase, this commit
maintains the same sequence for the runtime resume flow.
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250731-arm_cs_fix_clock_v4-v6-9-1dfe10bb3f6f@arm.com
|
|
The driver data no longer needs to be allocated separately in the static
and dynamic probes. Moved the allocation into the low-level functions to
avoid code duplication.
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250731-arm_cs_fix_clock_v4-v6-8-1dfe10bb3f6f@arm.com
|
|
CoreSight drivers enable pclk and atclk conditionally. For example,
pclk is only enabled in the static probe, while atclk is an optional
clock that it is enabled for both dynamic and static probes, if it is
present. In the current CoreSight drivers, these two clocks are
initialized separately. This causes complex and duplicate codes.
CoreSight drivers are refined so that clocks are initialized in one go.
For this purpose, this commit renames coresight_get_enable_apb_pclk() to
coresight_get_enable_clocks() and encapsulates clock initialization
logic:
- If a clock is initialized successfully, its clock pointer is assigned
to the double pointer passed as an argument.
- For ACPI devices, clocks are controlled by firmware, directly bail
out.
- Skip enabling pclk for an AMBA device.
- If atclk is not found, the corresponding double pointer is set to
NULL. The function returns Success (0) to guide callers can proceed
with no error.
- Otherwise, an error number is returned for failures.
The function became complex, move it from the header to the CoreSight
core layer and the symbol is exported. Added comments for recording
details.
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250731-arm_cs_fix_clock_v4-v6-7-1dfe10bb3f6f@arm.com
|
|
Some CoreSight components have trace bus clocks 'atclk' and are enabled
using clk_prepare_enable(). These clocks are not disabled when modules
exit.
As atclk is optional, use devm_clk_get_optional_enabled() to manage it.
The benefit is the driver model layer can automatically disable and
release clocks.
Check the returned value with IS_ERR() to detect errors but leave the
NULL pointer case if the clock is not found. And remove the error
handling codes which are no longer needed.
Fixes: d1839e687773 ("coresight: etm: retrieve and handle atclk")
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250731-arm_cs_fix_clock_v4-v6-5-1dfe10bb3f6f@arm.com
|
|
Some CoreSight components have programming clocks (pclk) and are enabled
using clk_get() and clk_prepare_enable(). However, in many cases, these
clocks are not disabled when modules exit and only released by clk_put().
To fix the issue, this commit refactors programming clock by replacing
clk_get() and clk_prepare_enable() with devm_clk_get_optional_enabled()
for enabling APB clock. If the "apb_pclk" clock is not found, a NULL
pointer is returned, and the function proceeds to attempt enabling the
"apb" clock.
Since ACPI platforms rely on firmware to manage clocks, returning a NULL
pointer in this case leaves clock management to the firmware rather than
the driver. This effectively avoids a clock imbalance issue during
module removal - where the clock could be disabled twice: once during
the ACPI runtime suspend and again during the devm resource release.
Callers are updated to reuse the returned error value.
With the change, programming clocks are managed as resources in driver
model layer, allowing clock cleanup to be handled automatically. As a
result, manual cleanup operations are no longer needed and are removed
from the Coresight drivers.
Fixes: 73d779a03a76 ("coresight: etm4x: Change etm4_platform_driver driver for MMIO devices")
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250731-arm_cs_fix_clock_v4-v6-4-1dfe10bb3f6f@arm.com
|
|
The atclk is an optional clock for the CoreSight ETMv4, but the driver
misses to initialize it.
This change enables atclk in probe of the ETMv4 driver, and dynamically
control the clock during suspend and resume.
No need to check the driver data and clock pointer in the runtime
suspend and resume, so remove checks. And add error handling in the
resume function.
Add a minor fix to the comment format when adding the atclk field.
Fixes: 2e1cdfe184b5 ("coresight-etm4x: Adding CoreSight ETM4x driver")
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250731-arm_cs_fix_clock_v4-v6-3-1dfe10bb3f6f@arm.com
|
|
The atclk is an optional clock for the CoreSight CATU, but the driver
misses to initialize it.
This change enables atclk in probe of the CATU driver, and dynamically
control the clock during suspend and resume.
The checks for driver data and clocks in suspend and resume are not
needed, remove them. Add error handling in the resume function.
Fixes: fcacb5c154ba ("coresight: Introduce support for Coresight Address Translation Unit")
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250731-arm_cs_fix_clock_v4-v6-2-1dfe10bb3f6f@arm.com
|
|
The atclk is an optional clock for the CoreSight TMC, but the driver
misses to initialize it. In most cases, TMC shares the atclk clock with
other CoreSight components. Since these components enable the clock
before the TMC device is initialized, the TMC continues properly,
which is why we don’t observe any lockup issues.
This change enables atclk in probe of the TMC driver. Given the clock
is optional, it is possible to return NULL if the clock does not exist.
IS_ERR() is tolerant for this case.
Dynamically disable and enable atclk during suspend and resume. The
clock pointers will never be error values if the driver has successfully
probed, and the case of a NULL pointer case will be handled by the clock
core layer. The driver data is always valid after probe. Therefore,
remove the related checks. Also in the resume flow adds error handling.
Fixes: bc4bf7fe98da ("coresight-tmc: add CoreSight TMC driver")
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250731-arm_cs_fix_clock_v4-v6-1-1dfe10bb3f6f@arm.com
|
|
The TRCEXTINSELR is only implemented if TRCIDR5.NUMEXTINSEL > 0.
To avoid invalid accesses, introduce a check on numextinsel
(derived from TRCIDR5[11:9]) before reading or writing to this register.
Fixes: f5bd523690d2 ("coresight: etm4x: Convert all register accesses")
Signed-off-by: Yuanfang Zhang <yuanfang.zhang@oss.qualcomm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250812-trcextinselr_issue-v2-1-e6eb121dfcf4@oss.qualcomm.com
|
|
Fix wrong indentation in cscfg_remove_owned_csdev_configs()
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506102238.XQfScl5x-lkp@intel.com/
Fixes: 53b9e2659719 ("coresight: holding cscfg_csdev_lock while removing cscfg from csdev")
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250611103025.939020-1-yeoreum.yun@arm.com
|
|
The devm_ioremap_resource() function returns error pointers on error.
It never returns NULL. Update the error checking to match.
Fixes: e54a52a28a36 ("coresight: add coresight Trace Network On Chip driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/7bd9fae8-a15f-412a-8800-ce47acf0b5ce@sabinyo.mountain
|
|
The function is unused; remove it.
Instead of relying on a general blit helper, drivers should pick a blit
function by themselves from their list of supported color formats.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250918154207.84714-4-tzimmermann@suse.de
|
|
Some configurations of sysfb outputs require format conversion from
framebuffer to scanout buffer. It is a driver bug if the conversion
helper is missing, yet it might happen on odd scanout formats. The old
code, based on drm_fb_blit(), only detects this situation during the
commit's hardware update, which is too late to abort the update.
Lookup the correct blit helper as part of the check phase. Then store
it in the sysfb plane state. Allows for detection of a missing helper
before the commit has started. Also avoids drm_fb_blit()'s large switch
statement on each updated scanline. Only a single lookup has to be done.
The lookup is in drm_sysfb_get_blit_func(), which only tracks formats
supported by sysfb drivers.
The lookup happens in sysfb's begin_fb_access helper instead of its
atomic_check helper. This allows vesadrm, and possibly other drivers,
to implement their own atomic_check without interfering with blit
lookups. Vesadrm implements XRGB8888 on top of R8 formats with the
help of the atomic_check. Doing the blit lookup in begin_fb_access then
always uses the correct CRTC format on all drivers.
v2:
- vesadrm: use drm_sysfb_plane_helper_begin_fb_access()
- fix type in commit description (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250918154207.84714-3-tzimmermann@suse.de
|
|
The plane-state type struct drm_sysfb_plane_state will store the
helper for blitting to the scanout buffer.
v2:
- add variable for duplicated shadow-plane state (Javier)
- fix build error
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250918154207.84714-2-tzimmermann@suse.de
|
|
The dm-raid code was using hardcoded integer values to represent the
read-only/read-write state of RAID arrays instead of the proper
enumeration constants defined in the md_ro_state enumerator type.
Changes:
- Replace hardcoded integers with the appropriate md_ro_state enumerator
values
- Add the missing MD_RDONLY setting in the post_suspend function
(no failures have been attributed to this inconsistency, the fix
ensures correct state transitions for completeness)
This improves code clarity and maintainability by using the defined
enumeration constants rather than magic numbers, ensuring the code
properly conforms to the established API interface.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
The previous patch preferred async interface for the purpose of testing.
However, the synchronous interface is faster, so it should be preferred.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
This commit enables the asynchronous hash interface in dm-integrity.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Rename "internal_hash" to "internal_shash" and introduce a boolean value
"internal_hash".
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Make sure that the "data" argument passed to integrity_sector_checksum is
always page-aligned and add an "offset" argument that specifies the
offset from the start of the page. This will enable us to use the
asynchronous hash interface later.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Allocate the recalculate buffer with kmalloc rather than vmalloc. This
will be needed later, for the simplification of the asynchronous hash
interface.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Similar to how we annotate dma-fences, add lockep annotation to
the pm_block completion to ensure we don't wait for it while holding
locks that are needed in the pm notifier or in the device
suspend / resume callbacks.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250918142848.21807-3-thomas.hellstrom@linux.intel.com
|
|
During pm notifier eviction we may still race with validations.
Ensure those are blocked out during eviction to ensure we have
access to as much system memory as possible.
During the suspend operation itself, we run single-threaded so that
shouldn't be a problem.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250918142848.21807-2-thomas.hellstrom@linux.intel.com
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: New device support, features and cleanup for 6.18
New device support
==================
ad,ade9000
- New driver for this complex energy and power monitoring ADC.
infineon,tlv493d
- New driver for this 3D magnetic sensor.
intel,dollar
- New driver for this TI PMIC (part number unknown)
marvel,88pm886
- Driver for this PMIC ADC.
microchip,mcp9600
- Add explicit support for the mcp9601 which has some additional features
over the mcp9600.
rohm,bd79112
- New driver for this ADC / GPIO Chip.
Features
========
Core
- New helper to multiply data expressed in IIO types.
- Add KUnit tests.
- New IIO_ALTCURRENT type, similar to existing IIO_ALTVOLTAGE
- Add some channel modifiers related to energy and power, such as
reactive.
adi,ad7124
- Support external clocks sources and output of the internal clocks.
- Filter control.
adi,ad7173
- Add filter support. Some fiddly interactions with other parameters on this
device.
adi,ad7779
- Add backend support which required control of the number of lanes used.
liteon,ltr390
- Add runtime PM support.
microchip,mcp9600
- Add support for different thermocouple types.
Cleanup and minor fixes
=======================
core
- Switch info_mask fields to be unsigned. Not clear why they were ever
signed.
- Fix handling of negative channel scale in iio_convert_raw_to_processed()
- Fix offset handling for channels without a scale attribute.
- Improve the precision of scaling slightly.
- Drop apparent handling of IIO_CHAN_INFO_PROCESSED for devices that don't
have any such channels.
various
- Drop many pm_runtime_mark_last_busy() calls now
pm_runtime_put_autosuspend() calls it internally.
- Drop dev_err_probe() calls where the error code is hard coded as -ENOMEM
as they don't do anything.
- Drop dev_err() calls where the error code is -ENOMEM. This will reduce
error prints, but memory failures generate a lot of messages anyway
so unlikely we need these prints.
current-sense-amplifier
- Add #io-channels property this channel to be used by a consumer driver.
adi,ad7124
- Fix incorrect clocks dt-binding property.
- Make the mclk clock optional in DT - this is internal to the ADC so should
never have been in he binding.
- Fix up sample rate to comply with ABI.
- Use read_avail() callback rather than opencoding similar.
- Deploy guard() to clean up some lock handling.
adi,ad7768
- Use devm_regulator_get_enable_read_voltage() to replace similar code.
adi,ad7816
- Drop an unnecessary dev_set_drvdata() call as nothing uses the data.
ad,adxl345
- Fix missing blank line before bullet list in documentation.
arm,scmi
- Use devm_kcalloc() for an array allocation rather than devm_kzalloc().
bosch,bmi270
- Match an ACPI ID seen in the wild. It is not spec compliant but we can't
do much about that.
bosch,bmp280
- Drop overly noisy dev_info()
- Allow for sleeping gpio controllers.
gogle,cros-ec
- Drop unused location attribute that has been replaced by label.
invense,icm42600
- Simplify the power management.
- Use guard() to simplify some locking.
maxim,max1238
- Add io-channel-cells property to dt-binding as there is an in tree
consumer.
microchip,mcp9600
- Specify a default value in dt-binding for the thermocouple type
- General whitespace cleanup.
samsung,exynos
- Drop support for the S3C2410 including bindings, and touchscreen support
as nothing else uses that.
- Drop platform ID based binding as not used.
st,vl53l0x
- Fix returning the wrong variable in an error path.
ti,pac1934
- Replace open coded devm_mutex_init().
xilinx,ams
- Update maintainers entry.
* tag 'iio-for-6.18a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (178 commits)
MAINTAINERS: Support ROHM BD79112 ADC
iio: adc: Support ROHM BD79112 ADC/GPIO
dt-bindings: iio: adc: ROHM BD79112 ADC/GPIO
iio: pressure: bmp280: Use gpiod_set_value_cansleep()
iio: pressure: bmp280: Remove noisy dev_info()
iio: ABI: add filter types for ad7173
iio: adc: ad7173: support changing filter type
iio: adc: ad7173: rename odr field
iio: adc: ad7173: rename ad7173_chan_spec_ext_info
iio: adc: Add driver for Marvell 88PM886 PMIC ADC
dt-bindings: mfd: 88pm886: Add #io-channel-cells
iio: ABI: document "sinc4+rej60" filter_type
iio: adc: ad7124: add filter support
iio: adc: ad7124: support fractional sampling_frequency
iio: adc: ad7124: use guard(mutex) to simplify return paths
iio: adc: ad7124: use read_avail() for scale_available
iio: adc: ad7124: use clamp()
iio: adc: ad7124: fix sample rate for multi-channel use
Documentation: ABI: iio: add sinc4+lp
docs: iio: add documentation for ade9000 driver
...
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect changes for 6.18
This pull request contains the interconnect changes for the 6.18-rc1
merge window. It contains new driver and a minor core cleanup.
Core change:
- Use device_match_of_node() instead of open coding it
Driver changes:
- Add new driver for the Qualcomm Glymur SoC
- Enable OSM L3 support for the QCS615 SoC
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.18-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
dt-bindings: interconnect: Add OSM L3 compatible for QCS615 SoC
interconnect: core: Use device_match_of_node()
interconnect: qcom: add glymur interconnect provider driver
interconnect: qcom: icc-rpmh: increase MAX_PORTS to support four QoS ports
dt-bindings: interconnect: document the RPMh Network-On-Chip interconnect in Glymur SoC
|
|
The driver uses drm_gem_shmem_prime_import_no_map() and
drm_gem_shmem_dumb_create(), but the Kconfig currently selects
DRM_GEM_DMA_HELPER instead of DRM_GEM_SHMEM_HELPER. This causes
link failures when DRM_GEM_SHMEM_HELPER is not enabled.
Select DRM_GEM_SHMEM_HELPER to fix the build.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202509220320.gfFZjmyg-lkp@intel.com/
Fixes: c9e70639f591 ("drm: tiny: Add support for Mayqueen Pixpaper e-ink panel")
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: LiangCheng Wang <zaq14760@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250922-bar-v1-1-b2a1f54ace82@gmail.com
|
|
The CMT do a housekeeping such as dealing with runtime PM and
enable/disable clocks when either a clock source is enabled, or when a
new clock event is registered.
Doing this type of housekeeping for when a clock event is registered is
not always possible as it can happen in contexts where holding spinlocks
is not possible. However doing it when registering a clock source is
possible.
As a first step to address this design break apart the CMT start and
stop functions. The path for clock sources need not change, while the
one for clock events need to be reworked in future work.
There is no indented functional change, just breaking the two use-cases
controlled by a flag into two distinct functions.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250910142657.1148696-2-niklas.soderlund+renesas@ragnatech.se
|
|
The current implementation of clps711x_timer_init() has multiple error
paths that directly return without releasing the base I/O memory mapped
via of_iomap(). Fix of_iomap leaks in error paths.
Fixes: 04410efbb6bc ("clocksource/drivers/clps711x: Convert init function to return error")
Fixes: 2a6a8e2d9004 ("clocksource/drivers/clps711x: Remove board support")
Signed-off-by: Zhen Ni <zhen.ni@easystack.cn>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250814123324.1516495-1-zhen.ni@easystack.cn
|
|
prescaler values
am43xx has a clock tree where the global timer clock is an indirect child
of the CPU clock used for frequency scaling:
dpll_mpu_ck -- CPU/cpufreq
|
v
dpll_mpu_m2_ck -- divider
|
v
mpu_periphclk -- fixed divider by 2 used for global timer
When CPU frequency changes, the global timer's clock notifier rejects
the change because the hardcoded prescaler (1 or 2) cannot accommodate
the frequency range across all CPU OPPs (300, 600, 720, 800, 1000 MHz).
Add platform-specific prescaler auto-detection to solve this issue:
- am43xx: prescaler = 50 (calculated as initial_freq/GCD of all OPP
freqs) This allows the timer to work across all CPU frequencies after
the fixed divider by 2. Tested on am4372-idk-evm.
- zynq-7000: prescaler = 2 (preserves previous Kconfig default)
- Other platforms: prescaler = 1 (previous default)
The Kconfig option now defaults to 0 (auto-detection) but can still
override the auto-detected value when set to a non-zero value,
preserving existing customization workflows.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20250819-topic-am43-arm-global-timer-v6-16-v2-1-6d082e2a5161@baylibre.com
|
|
determine_rate()
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
appended to the "under-the-cut" portion of the patch.
While changes are being made to 'struct clk_ops', let's also go ahead
and fix the formatting of set_rate so that everything lines up as
expected.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20250810-clocksource-round-rate-v1-1-486ef53e45eb@redhat.com
|
|
The watchdog core will handle error messages already.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Link: https://lore.kernel.org/r/20250813190657.3628-2-wsa+renesas@sang-engineering.com
|
|
While the main SoC PLL is responsible for the lexra bus frequency
it has no implications on the the timer divisior. Update the
comments accordingly.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20250804080328.2609287-5-markus.stockhausen@gmx.de
|
|
During normal operation the timers are reprogrammed including an
interrupt acknowledgement. This has no effect as the whole timer
is setup from scratch afterwards. Especially in an interrupt this
has already been done by rttm_timer_interrupt().
Change the behaviour as follows:
- Use rttm_disable_timer() during reprogramming
- Keep rttm_stop_timer() for all other use cases.
Downstream has already tested and confirmed a patch. See
https://github.com/openwrt/openwrt/pull/19468
https://forum.openwrt.org/t/support-for-rtl838x-based-managed-switches/57875/3788
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Stephen Howell <howels@allthatwemight.be>
Tested-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20250804080328.2609287-4-markus.stockhausen@gmx.de
|
|
kern_path_locked() is now only used to prepare for removing an object
from the filesystem (and that is the only credible reason for wanting a
positive locked dentry). Thus it corresponds to kern_path_create() and
so should have a corresponding name.
Unfortunately the name "kern_path_create" is somewhat misleading as it
doesn't actually create anything. The recently added
simple_start_creating() provides a better pattern I believe. The
"start" can be matched with "end" to bracket the creating or removing.
So this patch changes names:
kern_path_locked -> start_removing_path
kern_path_create -> start_creating_path
user_path_create -> start_creating_user_path
user_path_locked_at -> start_removing_user_path_at
done_path_create -> end_creating_path
and also introduces end_removing_path() which is identical to
end_creating_path().
__start_removing_path (which was __kern_path_locked) is enhanced to
call mnt_want_write() for consistency with the start_creating_path().
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The current counter value is a read only register. It will be
reset when writing a new target timer value with rttm_set_period().
rttm_set_counter() is essentially a noop. Drop it.
While this makes rttm_start_timer() and rttm_enable_timer() the
same functions keep both to make the established abstraction layers
for register and control functions active.
Downstream has already tested and confirmed a patch. See
https://github.com/openwrt/openwrt/pull/19468
https://forum.openwrt.org/t/support-for-rtl838x-based-managed-switches/57875/3788
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Stephen Howell <howels@allthatwemight.be>
Tested-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20250804080328.2609287-3-markus.stockhausen@gmx.de
|
|
The OpenWrt distribution has switched from kernel longterm 6.6 to
6.12. Reports show that devices with the Realtek Otto switch platform
die during operation and are rebooted by the watchdog. Sorting out
other possible reasons the Otto timer is to blame. The platform
currently consists of 4 targets with different hardware revisions.
It is not 100% clear which devices and revisions are affected.
Analysis shows:
A more aggressive sched/deadline handling leads to more timer starts
with small intervals. This increases the bug chances. See
https://marc.info/?l=linux-kernel&m=175276556023276&w=2
Focusing on the real issue a hardware limitation on some devices was
found. There is a minimal chance that a timer ends without firing an
interrupt if it is reprogrammed within the 5us before its expiration
time. Work around this issue by introducing a bounce() function. It
restarts the timer directly before the normal restart functions as
follows:
- Stop timer
- Restart timer with a slow frequency.
- Target time will be >5us
- The subsequent normal restart is outside the critical window
Downstream has already tested and confirmed a patch. See
https://github.com/openwrt/openwrt/pull/19468
https://forum.openwrt.org/t/support-for-rtl838x-based-managed-switches/57875/3788
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Stephen Howell <howels@allthatwemight.be>
Tested-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20250804080328.2609287-2-markus.stockhausen@gmx.de
|
|
Add PWM capture function in DM timer driver.
OMAP DM timer hardware supports capture feature.It can be used to
timestamp events (falling/rising edges) detected on input signal.
Signed-off-by: Gokul Praveen <g-praveen@ti.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Link: https://lore.kernel.org/r/20250812105346.203541-1-g-praveen@ti.com
|
|
The MMIO driver can also double as a clocksource, something that was
missing in its previous incarnation. Add it for completeness.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20250814154622.10193-5-maz@kernel.org
|
|
Remove all the MMIO support from the per-CPU timer driver, and switch
over to the standalove driver.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20250814154622.10193-4-maz@kernel.org
|
