| Age | Commit message (Collapse) | Author |
|---|
|
Rename the internally used 'sda_pin' to 'sda_num' to make it clear that
this is NOT the actual pin number of the GPIO pin but rather the logical
SDA channel number. Although the alternate function SDA_Y is sometimes
given with the GPIO number, this is not always the case. Thus, avoid any
confusion or misconfiguration by giving the variable the correct name.
This follows the description change in the devicetree bindings.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Tested-by: Sven Eckelmann <sven@narfation.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # On RTL9302C based board
Tested-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250927101931.71575-4-jelonek.jonas@gmail.com
|
|
Adapt the RTL9300 I2C controller driver to use more of the regmap
API, especially make use of reg_field and regmap_field instead of macros
to represent registers. Most register operations are performed through
regmap_field_* API then.
Handle SCL selection using separate chip-specific functions since this
is already known to differ between the Realtek SoC families in such a
way that this cannot be properly handled using just a different
reg_field.
This makes it easier to add support for newer generations or to handle
differences between specific revisions within a series. Just by
defining a separate driver data structure with the corresponding
register field definitions and linking it to a new compatible.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Tested-by: Sven Eckelmann <sven@narfation.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # On RTL9302C based board
Tested-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250927101931.71575-2-jelonek.jonas@gmail.com
|
|
It was noticed that the original implementation of SMBus Block Write in the
driver was actually an I2C Block Write. Both differ only in the Count byte
before the actual data:
S Addr Wr [A] Comm [A] Count [A] Data [A] Data [A] ... [A] Data [A] P
The I2C Block Write is just skipping this Count byte and starts directly
with the data:
S Addr Wr [A] Comm [A] Data [A] Data [A] ... [A] Data [A] P
The I2C controller of RTL93xx doesn't handle this Count byte special and it
is simply another one of (16 possible) data bytes. Adding support for the
I2C Block Write therefore only requires skipping the count byte (0) in
data->block.
It is similar for reads. The SMBUS Block read is having a Count byte before
the data:
S Addr Wr [A] Comm [A]
Sr Addr Rd [A] [Count] A [Data] A [Data] A ... A [Data] NA P
And the I2C Block Read is directly starting with the actual data:
S Addr Wr [A] Comm [A]
Sr Addr Rd [A] [Data] A [Data] A ... A [Data] NA P
The I2C controller is also not handling this byte in a special way. It
simply provides every byte after the Rd marker + Ack as part of the 16 byte
receive buffer (registers). The content of this buffer just has to be
copied to the right position in the receive data->block.
Signed-off-by: Harshal Gohel <hg@simonwunderlich.de>
Co-developed-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Tested-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/all/20250927-i2c-rtl9300-multi-byte-v7-2-c0fd0e78b818@narfation.org
|
|
This reverts commit cef88d1265cac7d415606af73ba58926fd3cd8b7.
Due to change in the VF migration recovery design this code
is not needed any more.
v3:
- Add commit message (Michal / Lucas)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20251002233824.203417-4-michal.wajdeczko@intel.com
|
|
This reverts commit a0dda25d24e636df5c30a9370464b7cebc709faf.
Due to change in the VF migration recovery design this code
is not needed any more.
v3:
- Add commit message (Michal / Lucas)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20251002233824.203417-3-michal.wajdeczko@intel.com
|
|
recovery"
This reverts commit ba180a362128cb71d16c3f0ce6645448011d2607.
Due to change in the VF migration recovery design this code
is not needed any more.
v3:
- Add commit message (Michal / Lucas)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20251002233824.203417-2-michal.wajdeczko@intel.com
|
|
Pull SCSI updates from James Bottomley:
"Usual driver updates (ufs, mpi3mr, lpfc, pm80xx, mpt3sas) plus
assorted cleanups and fixes.
The only core update is to sd.c and is mostly cosmetic"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (105 commits)
scsi: MAINTAINERS: Update FC element owners
scsi: mpt3sas: Update driver version to 54.100.00.00
scsi: mpt3sas: Add support for 22.5 Gbps SAS link rate
scsi: mpt3sas: Suppress unnecessary IOCLogInfo on CONFIG_INVALID_PAGE
scsi: mpt3sas: Fix crash in transport port remove by using ioc_info()
scsi: ufs: ufs-qcom: Add support for limiting HS gear and rate
scsi: ufs: pltfrm: Add DT support to limit HS gear and gear rate
scsi: ufs: ufs-qcom: Remove redundant re-assignment to hs_rate
scsi: ufs: dt-bindings: Document gear and rate limit properties
scsi: ufs: core: Fix data race in CPU latency PM QoS request handling
scsi: libfc: Fix potential buffer overflow in fc_ct_ms_fill()
scsi: storvsc: Remove redundant ternary operators
scsi: ufs: core: Change MCQ interrupt enable flow
scsi: smartpqi: Replace kmalloc() + copy_from_user() with memdup_user()
scsi: hpsa: Replace kmalloc() + copy_from_user() with memdup_user()
scsi: hpsa: Fix potential memory leak in hpsa_big_passthru_ioctl()
scsi: lpfc: Copyright updates for 14.4.0.11 patches
scsi: lpfc: Update lpfc version to 14.4.0.11
scsi: lpfc: Convert debugfs directory counts from atomic to unsigned int
scsi: lpfc: Clean up extraneous phba dentries
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mikulas Patocka:
- a new dm-pcache target for read/write caching on persistent memory
- fix typos in docs
- misc small refactoring
- mark dm-error with DM_TARGET_PASSES_INTEGRITY
- dm-request-based: fix NULL pointer dereference and quiesce_depth out of sync
- dm-linear: optimize REQ_PREFLUSH
- dm-vdo: return error on corrupted metadata
- dm-integrity: support asynchronous hash interface
* tag 'for-6.18/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (27 commits)
dm raid: use proper md_ro_state enumerators
dm-integrity: prefer synchronous hash interface
dm-integrity: enable asynchronous hash interface
dm-integrity: rename internal_hash
dm-integrity: add the "offset" argument
dm-integrity: allocate the recalculate buffer with kmalloc
dm-integrity: introduce integrity_kmap and integrity_kunmap
dm-integrity: replace bvec_kmap_local with kmap_local_page
dm-integrity: use internal variable for digestsize
dm vdo: return error on corrupted metadata in start_restoring_volume functions
dm vdo: Update code to use mem_is_zero
dm: optimize REQ_PREFLUSH with data when using the linear target
dm-pcache: use int type to store negative error codes
dm: fix "writen"->"written"
dm-pcache: cleanup: fix coding style report by checkpatch.pl
dm-pcache: remove ctrl_lock for pcache_cache_segment
dm: fix NULL pointer dereference in __dm_suspend()
dm: fix queue start/stop imbalance under suspend/load/resume races
dm-pcache: add persistent cache target in device-mapper
dm error: mark as DM_TARGET_PASSES_INTEGRITY
...
|
|
Pull rdma updates from Jason Gunthorpe:
"A new Pensando ionic driver, a new Gen 3 HW support for Intel irdma,
and lots of small bnxt_re improvements.
- Small bug fixes and improves to hfi1, efa, mlx5, erdma, rdmarvt,
siw
- Allow userspace access to IB service records through the rdmacm
- Optimize dma mapping for erdma
- Fix shutdown of the GSI QP in mana
- Support relaxed ordering MR and fix a corruption bug with mlx5 DMA
Data Direct
- Many improvement to bnxt_re:
- Debugging features and counters
- Improve performance of some commands
- Change flow_label reporting in completions
- Mirror vnic
- RDMA flow support
- New RDMA driver for Pensando Ethernet devices: ionic
- Gen 3 hardware support for the Intel irdma driver
- Fix rdma routing resolution with VRFs"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (85 commits)
RDMA/ionic: Fix memory leak of admin q_wr
RDMA/siw: Always report immediate post SQ errors
RDMA/bnxt_re: improve clarity in ALLOC_PAGE handler
RDMA/irdma: Remove unused struct irdma_cq fields
RDMA/irdma: Fix positive vs negative error codes in irdma_post_send()
RDMA/bnxt_re: Remove non-statistics counters from hw_counters
RDMA/bnxt_re: Add debugfs info entry for device and resource information
RDMA/bnxt_re: Fix incorrect errno used in function comments
RDMA: Use %pe format specifier for error pointers
RDMA/ionic: Use ether_addr_copy instead of memcpy
RDMA/ionic: Fix build failure on SPARC due to xchg() operand size
RDMA/rxe: Fix race in do_task() when draining
IB/sa: Fix sa_local_svc_timeout_ms read race
IB/ipoib: Ignore L3 master device
RDMA/core: Use route entry flag to decide on loopback traffic
RDMA/core: Resolve MAC of next-hop device without ARP support
RDMA/core: Squash a single user static function
RDMA/irdma: Update Kconfig
RDMA/irdma: Extend CQE Error and Flush Handling for GEN3 Devices
RDMA/irdma: Add Atomic Operations support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"Two minor fixes:
- Make the selftest work again on x86 platforms with iommus enabled
- Fix a compiler warning in the userspace kselftest"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Register iommufd mock devices with fwspec
iommu/selftest: prevent use of uninitialized variable
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/fwctl/fwctl
Pull fwctl updates from Jason Gunthorpe:
- Fix mismatched kvalloc() kfree() on error paths
- Remove NOP dev_err_probe(), shouldn't print on error paths anyhow
- For mlx5 permit:
MLX5_CMD_OP_MODIFY_CONG_STATUS
MLX5_CMD_OP_QUERY_ADJACENT_FUNCTIONS_ID
MLX5_CMD_OP_DELEGATE_VHCA_MANAGEMENT
MLX5_CMD_OP_QUERY_DELEGATED_VHCA
- Use memdup_user in pds
* tag 'for-linus-fwctl' of git://git.kernel.org/pub/scm/linux/kernel/git/fwctl/fwctl:
pds_fwctl: Replace kzalloc + copy_from_user with memdup_user in pdsfc_fw_rpc
fwctl/mlx5: Add Adjacent function query commands and their scope
fwctl/mlx5: Allow MODIFY_CONG_STATUS command
pds_fwctl: Remove the use of dev_err_probe()
fwctl/mlx5: Fix memory alloc/free in mlx5ctl_fw_rpc()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
- Inte VT-d:
- IOMMU driver updated to the latest VT-d specification
- Don't enable PRS if PDS isn't supported
- Replace snprintf with scnprintf
- Fix legacy mode page table dump through debugfs
- Miscellaneous cleanups
- AMD-Vi:
- Support kdump boot when SNP is enabled
- Apple-DART:
- 4-level page-table support
- RISC-V IOMMU:
- ACPI support
- Small number of miscellaneous cleanups and fixes
* tag 'iommu-updates-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (22 commits)
iommu/vt-d: Disallow dirty tracking if incoherent page walk
iommu/vt-d: debugfs: Avoid dumping context command register
iommu/vt-d: Removal of Advanced Fault Logging
iommu/vt-d: PRS isn't usable if PDS isn't supported
iommu/vt-d: Remove LPIG from page group response descriptor
iommu/vt-d: Drop unused cap_super_offset()
iommu/vt-d: debugfs: Fix legacy mode page table dump logic
iommu/vt-d: Replace snprintf with scnprintf in dmar_latency_snapshot()
iommu/io-pgtable-dart: Fix off by one error in table index check
iommu/riscv: Add ACPI support
ACPI: scan: Add support for RISC-V in acpi_iommu_configure_id()
ACPI: RISC-V: Add support for RIMT
iommu/omap: Use int type to store negative error codes
iommu/apple-dart: Clear stream error indicator bits for T8110 DARTs
iommu/amd: Skip enabling command/event buffers for kdump
crypto: ccp: Skip SEV and SNP INIT for kdump boot
iommu/amd: Reuse device table for kdump
iommu/amd: Add support to remap/unmap IOMMU buffers for kdump
iommu/apple-dart: Add 4-level page table support
iommu/io-pgtable-dart: Add 4-level page table support
...
|
|
Add bounds checking to prevent writes past framebuffer boundaries when
rendering text near screen edges. Return early if the Y position is off-screen
and clip image height to screen boundary. Break from the rendering loop if the
X position is off-screen. When clipping image width to fit the screen, update
the character count to match the clipped width to prevent buffer size
mismatches.
Without the character count update, bit_putcs_aligned and bit_putcs_unaligned
receive mismatched parameters where the buffer is allocated for the clipped
width but cnt reflects the original larger count, causing out-of-bounds writes.
Reported-by: syzbot+48b0652a95834717f190@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=48b0652a95834717f190
Suggested-by: Helge Deller <deller@gmx.de>
Tested-by: syzbot+48b0652a95834717f190@syzkaller.appspotmail.com
Signed-off-by: Albin Babu Varghese <albinbabuvarghese20@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping updates from Marek Szyprowski:
- Refactoring of DMA mapping API to physical addresses as the primary
interface instead of page+offset parameters
This gets much closer to Matthew Wilcox's long term wish for
struct-pageless IO to cacheable DRAM and is supporting memdesc
project which seeks to substantially transform how struct page works.
An advantage of this approach is the possibility of introducing
DMA_ATTR_MMIO, which covers existing 'dma_map_resource' flow in the
common paths, what in turn lets to use recently introduced
dma_iova_link() API to map PCI P2P MMIO without creating struct page
Developped by Leon Romanovsky and Jason Gunthorpe
- Minor clean-up by Petr Tesarik and Qianfeng Rong
* tag 'dma-mapping-6.18-2025-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
kmsan: fix missed kmsan_handle_dma() signature conversion
mm/hmm: properly take MMIO path
mm/hmm: migrate to physical address-based DMA mapping API
dma-mapping: export new dma_*map_phys() interface
xen: swiotlb: Open code map_resource callback
dma-mapping: implement DMA_ATTR_MMIO for dma_(un)map_page_attrs()
kmsan: convert kmsan_handle_dma to use physical addresses
dma-mapping: convert dma_direct_*map_page to be phys_addr_t based
iommu/dma: implement DMA_ATTR_MMIO for iommu_dma_(un)map_phys()
iommu/dma: rename iommu_dma_*map_page to iommu_dma_*map_phys
dma-mapping: rename trace_dma_*map_page to trace_dma_*map_phys
dma-debug: refactor to use physical addresses for page mapping
iommu/dma: implement DMA_ATTR_MMIO for dma_iova_link().
dma-mapping: introduce new DMA attribute to indicate MMIO memory
swiotlb: Remove redundant __GFP_NOWARN
dma-direct: clean up the logic in __dma_direct_alloc_pages()
|
|
Now the node id only needs to be set for early memory, so move
memory_block_add_nid() into the caller and rename it into
memory_block_add_nid_early(). This allows us to further simplify the code
by dropping the 'context' argument to
do_register_memory_block_under_node().
Link: https://lkml.kernel.org/r/20250729064637.51662-4-hare@kernel.org
Suggested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The sysfs attributes for memory blocks require the node ID to be set and
initialized, so move the node activation before adding new memory blocks.
This also has the nice side effect that the BUG_ON() can be converted into
a WARN_ON() as we now can handle registration errors.
Link: https://lkml.kernel.org/r/20250729064637.51662-3-hare@kernel.org
Fixes: b9ff036082cd ("mm/memory_hotplug.c: make add_memory_resource use __try_online_node")
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/memory_hotplug: fixup crash during uevent handling", v4.
we have some udev rules trying to read the sysfs attribute 'valid_zones'
during an memory 'add' event, causing a crash in zone_for_pfn_range().
Debugging found that mem->nid was set to NUMA_NO_NODE, which crashed in
NODE_DATA(nid). Further analysis revealed that we're running into a race
with udev event processing: add_memory_resource() has this function calls:
1) __try_online_node()
2) arch_add_memory()
3) create_memory_block_devices()
-> calls device_register() -> memory 'add' event
4) node_set_online()/__register_one_node()
-> calls device_register() -> node 'add' event
5) register_memory_blocks_under_node()
-> sets mem->nid
Which, to the uninitated, is ... weird ...
Why do we try to online the node in 1), but only register the node in 4)
_after_ we have created the memory blocks in 3) ? And why do we set the
'nid' value in 5), when the uevent (which might need to see the correct
'nid' value) is sent out in 3) ? There must be a reason, I'm sure ...
So here's a small patchset to fixup uevent ordering. The first patch adds
a 'nid' parameter to add_memory_blocks() (to avoid mem->nid being
initialized with NUMA_NO_NODE), and the second patch reshuffles the code
in add_memory_resource() to fully initialize the node prior to calling
create_memory_block_devices() so that the node is valid at that time and
uevent processing will see correct values in sysfs.
This patch (of 3):
We have some udev rules trying to read the sysfs attribute 'valid_zones'
during an memory 'add' event, causing a crash in zone_for_pfn_range().
Debugging found that mem->nid was set to NUMA_NO_NODE, which crashed in
NODE_DATA(nid). Further analysis revealed that we're running into a race
with udev event processing: add_memory_resource() has this function calls:
1) __try_online_node()
2) arch_add_memory()
3) create_memory_block_devices()
-> calls device_register() -> memory 'add' event
4) node_set_online()/__register_one_node()
-> calls device_register() -> node 'add' event
5) register_memory_blocks_under_node()
-> sets mem->nid
Which, to the uninitated, is ... weird ...
Why do we try to online the node in 1), but only register the node in 4)
_after_ we have created the memory blocks in 3) ? And why do we set the
'nid' value in 5), when the uevent (which might need to see the correct
'nid' value) is sent out in 3) ? There must be a reason, I'm sure ...
So here's a small patchset to fixup uevent ordering. The first patch adds
a 'nid' parameter to add_memory_blocks() (to avoid mem->nid being
initialized with NUMA_NO_NODE), and the second patch reshuffles the code
in add_memory_resource() to fully initialize the node prior to calling
create_memory_block_devices() so that the node is valid at that time and
uevent processing will see correct values in sysfs.
This patch (of 3):
Add a 'nid' parameter to add_memory_block() to initialize the memory block
with the correct node id.
Link: https://lkml.kernel.org/r/20250729064637.51662-1-hare@kernel.org
Link: https://lkml.kernel.org/r/20250729064637.51662-2-hare@kernel.org
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In S3 and above sleep states, the device can loose power regardless of
d3cold.allowed flag. Bring up I2C controller explicitly in system PM
path to ensure its normal operation after losing power.
v2: Cover S3 and above states (Rodrigo)
Fixes: 0ea07b69517a ("drm/xe/pm: Wire up suspend/resume for I2C controller")
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250918103200.2952576-1-raag.jadav@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit e4863f1159befcd70df24fcb5458afaf2feab043)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
In xe_hw_engine_group_get_mode(), a write lock is acquired before
calling switch_mode(), which in turn invokes
xe_hw_engine_group_suspend_faulting_lr_jobs().
On failure inside xe_hw_engine_group_suspend_faulting_lr_jobs(),
the write lock is released there, and then again in
xe_hw_engine_group_get_mode(), leading to a double release.
Fix this by keeping both acquire and release operation in
xe_hw_engine_group_get_mode().
Fixes: 770bd1d34113 ("drm/xe/hw_engine_group: Ensure safe transition between execution modes")
Cc: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://lore.kernel.org/r/20250925023145.1203004-2-shuicheng.lin@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 662d98b8b373007fa1b08ba93fee11f6fd3e387c)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Currently this is hidden behind perfmon_capable() since this is
technically an info leak, given that this is a system wide metric.
However the granularity reported here is always PAGE_SIZE aligned, which
matches what the core kernel is already willing to expose to userspace
if querying how many free RAM pages there are on the system, and that
doesn't need any special privileges. In addition other drm drivers seem
happy to expose this.
The motivation here if with oneAPI where they want to use the system
wide 'used' reporting here, so not the per-client fdinfo stats. This has
also come up with some perf overlay applications wanting this
information.
Fixes: 1105ac15d2a1 ("drm/xe/uapi: restrict system wide accounting")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Joshua Santosh <joshua.santosh.ranjan@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250919122052.420979-2-matthew.auld@intel.com
(cherry picked from commit 4d0b035fd6dae8ee48e9c928b10f14877e595356)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The kunit_device_register() function never returns NULL, it returns
error pointers. Update the assertions to use
KUNIT_ASSERT_NOT_ERR_OR_NULL() instead of checking for NULL.
Fixes: 7f7acd193ba8 ("PM: runtime: Add basic kunit tests for API contracts")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull fs_context updates from Al Viro:
"Change vfs_parse_fs_string() calling conventions
Get rid of the length argument (almost all callers pass strlen() of
the string argument there), add vfs_parse_fs_qstr() for the cases that
do want separate length"
* tag 'pull-fs_context' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
do_nfs4_mount(): switch to vfs_parse_fs_string()
change the calling conventions for vfs_parse_fs_string()
|
|
Print "entry->mac" before freeing "entry". The "entry" pointer is
freed with kfree_rcu() so it's unlikely that we would trigger this
in real life, but it's safer to re-order it.
Fixes: cc5387f7346a ("net/mlx4_en: Add unicast MAC filtering")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/aNvMHX4g8RksFFvV@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
lan78xx_read_raw_eeprom
Syzbot reported read of uninitialized variable BUG with following call stack.
lan78xx 8-1:1.0 (unnamed net_device) (uninitialized): EEPROM read operation timeout
=====================================================
BUG: KMSAN: uninit-value in lan78xx_read_eeprom drivers/net/usb/lan78xx.c:1095 [inline]
BUG: KMSAN: uninit-value in lan78xx_init_mac_address drivers/net/usb/lan78xx.c:1937 [inline]
BUG: KMSAN: uninit-value in lan78xx_reset+0x999/0x2cd0 drivers/net/usb/lan78xx.c:3241
lan78xx_read_eeprom drivers/net/usb/lan78xx.c:1095 [inline]
lan78xx_init_mac_address drivers/net/usb/lan78xx.c:1937 [inline]
lan78xx_reset+0x999/0x2cd0 drivers/net/usb/lan78xx.c:3241
lan78xx_bind+0x711/0x1690 drivers/net/usb/lan78xx.c:3766
lan78xx_probe+0x225c/0x3310 drivers/net/usb/lan78xx.c:4707
Local variable sig.i.i created at:
lan78xx_read_eeprom drivers/net/usb/lan78xx.c:1092 [inline]
lan78xx_init_mac_address drivers/net/usb/lan78xx.c:1937 [inline]
lan78xx_reset+0x77e/0x2cd0 drivers/net/usb/lan78xx.c:3241
lan78xx_bind+0x711/0x1690 drivers/net/usb/lan78xx.c:3766
The function lan78xx_read_raw_eeprom failed to properly propagate EEPROM
read timeout errors (-ETIMEDOUT). In the fallthrough path, it first
attempted to restore the pin configuration for LED outputs and then
returned only the status of that restore operation, discarding the
original timeout error.
As a result, callers could mistakenly treat the data buffer as valid
even though the EEPROM read had actually timed out with no data or partial
data.
To fix this, handle errors in restoring the LED pin configuration separately.
If the restore succeeds, return any prior EEPROM timeout error correctly
to the caller.
Reported-by: syzbot+62ec8226f01cb4ca19d9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=62ec8226f01cb4ca19d9
Fixes: 8b1b2ca83b20 ("net: usb: lan78xx: Improve error handling in EEPROM and OTP operations")
Signed-off-by: Bhanu Seshu Kumar Valluri <bhanuseshukumar@gmail.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250930084902.19062-1-bhanuseshukumar@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
- Fix whitespace issues (Li Jun)
- Fix pci_acpi_preserve_config() memory leak (Nirmoy Das)
- Add sysfs 'serial_number' file to expose the Device Serial Number
(Matthew Wood)
* pci/misc:
PCI/sysfs: Expose PCI device serial number
PCI/ACPI: Fix pci_acpi_preserve_config() memory leak
|
|
- Clear bootloader E_ECAM_CONTROL before merging in the new driver value
(Jani Nurminen)
* pci/controller/xilinx-nwl:
PCI: xilinx-nwl: Fix ECAM programming
|
|
* pci/controller/xgene:
PCI: xgene-msi: Return negative -EINVAL in xgene_msi_handler_setup()
|
|
- Correct the devm_kcalloc() argument order (Alok Tiwari)
- When asserting PERST#, disable the controller instead of mistakenly
disabling the PLL twice (Nagarjuna Kristam)
- Convert struct tegra_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
- Rename 'root_bus' to 'root_port_bus' for clarity (Manivannan Sadhasivam)
* pci/controller/tegra:
PCI: tegra194: Rename 'root_bus' to 'root_port_bus' in tegra_pcie_downstream_dev_to_D0()
PCI: tegra: Convert struct tegra_msi mask_lock into raw spinlock
PCI: tegra194: Fix duplicate PLL disable in pex_ep_event_pex_rst_assert()
PCI: tegra: Fix devm_kcalloc() argument order for port->phys allocation
|
|
- Update pinctrl documentation of initial states and use in runtime
suspend/resume (Christian Bruel)
- Add pinctrl_pm_select_init_state() for use by stm32 driver, which needs
it during resume (Christian Bruel)
- Add devicetree bindings and drivers for the STMicroelectronics STM32MP25
in host and endpoint modes (Christian Bruel)
* pci/controller/stm32:
MAINTAINERS: Add entry for ST STM32MP25 PCIe drivers
PCI: stm32-ep: Add PCIe Endpoint support for STM32MP25
dt-bindings: PCI: Add STM32MP25 PCIe Endpoint bindings
PCI: stm32: Add PCIe host support for STM32MP25
dt-bindings: PCI: Add STM32MP25 PCIe Root Complex bindings
pinctrl: Add pinctrl_pm_select_init_state helper function
Documentation: pinctrl: Describe PM helper functions for standard states.
|
|
- Check for existence of struct cdns_pcie.ops before using it to allow
Cadence drivers that don't need to supply ops (Chen Wang)
- Add DT binding and driver for the Sophgo SG2042 PCIe controller (Chen
Wang)
* pci/controller/sophgo:
PCI: sg2042: Add Sophgo SG2042 PCIe driver
PCI: cadence: Check for the existence of cdns_pcie::ops before using it
dt-bindings: pci: Add Sophgo SG2042 PCIe host
|
|
- Pass the correct IRQ domain to generic_handle_domain_irq() to fix a
regression when converting to msi_create_parent_irq_domain() (Claudiu
Beznea)
- Drop the spinlock protecting the PMSR register; it's no longer required
since pci_lock already serializes accesses (Marek Vasut)
- Convert struct rcar_msi mask_lock to raw spinlock to avoid a lock nesting
error (Marek Vasut)
* pci/controller/rcar-host:
PCI: rcar-host: Convert struct rcar_msi mask_lock into raw spinlock
PCI: rcar-host: Drop PMSR spinlock
PCI: rcar-host: Pass proper IRQ domain to generic_handle_domain_irq()
|
|
- Fix a typo that prevented correct PHY initialization (Marek Vasut)
- Add a missing 1ms delay after PWR reset assertion as required by the V4H
manual (Marek Vasut)
- Assure reset has completed before DBI access to avoid SError (Marek
Vasut)
- Fix inverted PHY initialization check, which sometimes led to timeouts
and failure to start the controller (Marek Vasut)
* pci/controller/rcar-gen4:
PCI: rcar-gen4: Fix inverted break condition in PHY initialization
PCI: rcar-gen4: Assure reset occurs before DBI access
PCI: rcar-gen4: Add missing 1ms delay after PWR reset assertion
PCI: rcar-gen4: Fix PHY initialization
|
|
- Select PCI Power Control Slot driver so slot voltage rails can be turned
on/off if described in Root Port device tree node (Qiang Yu)
- Parse only PCI bridge child nodes in device tree, skipping unrelated
nodes such as OPP (Operating Performance Points), which caused probe
failures (Krishna Chaitanya Chundru)
- Add 8.0 GT/s and 32.0 GT/s equalization settings (Ziyue Zhang)
- Fix typo in CURSOR macro names (Ziyue Zhang)
- Consolidate Root Port 'phy' and 'reset' properties in struct
qcom_pcie_port, regardless of whether we got them from the Root Port node
or the host bridge node (Manivannan Sadhasivam)
- Fetch and map the ELBI register space in the DWC core rather than in each
driver individually (Krishna Chaitanya Chundru)
- Enable ECAM mechanism in DWC core by setting up iATU with 'CFG Shift
Feature' and use this in the qcom driver (Krishna Chaitanya Chundru)
* pci/controller/qcom:
PCI: dwc: Support ECAM mechanism by enabling iATU 'CFG Shift Feature'
PCI: qcom: Prepare for the DWC ECAM enablement
PCI: dwc: Prepare the driver for enabling ECAM mechanism using iATU 'CFG Shift Feature'
PCI: dwc: Add support for ELBI resource mapping
PCI: qcom: Move host bridge 'phy' and 'reset' pointers to struct qcom_pcie_port
PCI: qcom: Fix macro typo for CURSOR
PCI: qcom: Add equalization settings for 8.0 GT/s and 32.0 GT/s
PCI: qcom: Restrict port parsing only to PCIe bridge child nodes
PCI: qcom: Select PCI Power Control Slot driver
|
|
- Return -ENOMEM directly instead of using dev_err_probe() (Xichao Zhao)
* pci/controller/plda:
PCI: plda: Remove dev_err_probe() when the errno is -ENOMEM
|
|
- Add optional sys clock ready time setting to avoid sys_clk_rdy signal
glitching in MT6991 and MT8196 (AngeloGioacchino Del Regno)
- Add DT binding and driver support for MT6991 and MT8196 (AngeloGioacchino
Del Regno)
* pci/controller/mediatek-gen3:
PCI: mediatek-gen3: Add support for MediaTek MT8196 SoC
dt-bindings: PCI: mediatek-gen3: Add support for MT6991/MT8196
PCI: mediatek-gen3: Implement sys clock ready time setting
|
|
- Use kcalloc() instead of kzalloc() to avoid potential integer overflow
(Qianfeng Rong)
- Use devm_request_irq() so 'ks-pcie-error-irq' is freed when driver exits
with error (Siddharth Vadapalli)
* pci/controller/keystone:
PCI: keystone: Use devm_request_irq() to free "ks-pcie-error-irq" on exit
PCI: keystone: Use kcalloc() instead of kzalloc()
|
|
- Add MODULE_DEVICE_TABLE() so driver can be autoloaded (Siddharth
Vadapalli)
- Power controller off before configuring the glue layer so the controller
latches the correct values on power-on (Siddharth Vadapalli)
- Correct the error message when j721e_pcie_ctrl_init() fails (Alok Tiwari)
* pci/controller/j721e:
PCI: j721e: Fix incorrect error message in probe()
PCI: j721e: Fix programming sequence of "strap" settings
PCI: j721e: Fix module autoloading
|
|
- Enable the 3.3V Vaux supply if available so devices can request wakeup
with either Beacon or WAKE# (Richard Zhu)
* pci/controller/imx6:
PCI: imx6: Enable the Vaux supply if available
|
|
- Remove unused hv_msi_free() parameter (Nam Cao)
* pci/controller/hv:
PCI: hv: Remove unused parameter of hv_msi_free()
|
|
- Verify that if DT specifies a single IRQ for all eDMA channels, it is
named 'dma' (Niklas Cassel)
- Remove qcom edma.nr_irqs initialization, which is redundant since
dw_pcie_edma_irq_verify() initializes it based on whether the DT contains
'dma' (single IRQ) or 'dmaX' (multiple IRQs) (Niklas Cassel)
* pci/controller/dwc-edma:
PCI: qcom-ep: Remove redundant edma.nr_irqs initialization
PCI: dwc: Verify the single eDMA IRQ in dw_pcie_edma_irq_verify()
|
|
- Add support for x16 in devicetree 'num-lanes' property (Konrad Dybcio)
* pci/controller/dwc:
PCI: dwc: Support 16-lane operation
|
|
- Update DT binding example to separate PERST# to a Root Port stanza to
make multiple Root Ports possible in the future (Sai Krishna Musham)
- Add driver support for Root Port PERST# (Sai Krishna Musham)
* pci/controller/amd-mdb:
PCI: amd-mdb: Add support for PCIe RP PERST# signal handling
dt-bindings: PCI: amd-mdb: Add example usage of reset-gpios for PCIe RP PERST#
|
|
- Check for errors returned from pci_epc_get(), which returns IS_ERR(), not
NULL on error (Dan Carpenter)
- Fix pci_endpoint_test_ioctl() array underflow (Dan Carpenter)
- Document sysfs interface for BAR assignment of vNTB endpoint functions
(Jerome Brunet)
- Drop superfluous pci_epc_features initialization for unsupported
features; we only have to mention features that *are* supported (Niklas
Cassel)
- Skip IRQ tests if the IRQ is out of range (Christian Bruel)
- Fix pci-epf-test for controllers with fixed-size BARs smaller than
requested by the test (Marek Vasut)
- Restore inbound translation when disabling doorbell so the doorbell test
case can be run more than once (Niklas Cassel)
- Check for NULL before releasing DMA channels to avoid a NULL pointer
dereference (Shin'ichiro Kawasaki)
- Convert tegra194 interrupt number to MSI vector to fix endpoint Kselftest
MSI_TEST test case (Niklas Cassel)
- Set tegra_pcie_epc_features.msi_capable so the pci_endpoint_test can use
the optimal IRQ type (Niklas Cassel)
- Reset tegra194 BARs when running in endpoint mode so the BAR tests don't
overwrite the ATU settings in BAR4 (Niklas Cassel)
- Handle errors in tegra194 BPMP transactions so we don't mistakenly skip
future PERST# assertion (Vidya Sagar)
* pci/endpoint:
PCI: tegra194: Handle errors in BPMP response
PCI: tegra194: Reset BARs when running in PCIe endpoint mode
PCI: tegra194: Set pci_epc_features::msi_capable to true
PCI: tegra194: Fix broken tegra_pcie_ep_raise_msi_irq()
PCI: endpoint: pci-epf-test: Add NULL check for DMA channels before release
PCI: endpoint: pci-epf-test: Fix doorbell test support
PCI: endpoint: pci-epf-test: Limit PCIe BAR size for fixed BARs
selftests: pci_endpoint: Skip IRQ test if IRQ is out of range.
misc: pci_endpoint_test: Cleanup extra 0 initialization
misc: pci_endpoint_test: Skip IRQ tests if irq is out of range
PCI: endpoint: Drop superfluous pci_epc_features initialization
Documentation: PCI: endpoint: Document BAR assignment
misc: pci_endpoint_test: Fix array underflow in pci_endpoint_test_ioctl()
PCI: endpoint: pci-ep-msi: Fix NULL vs IS_ERR() check in pci_epf_write_msi_msg()
|
|
- Simplify __pci_find_next_cap_ttl() by replacing magic numbers with
#defines, extracting fields with FIELD_GET(), etc (Hans Zhang)
- Convert __pci_find_next_cap_ttl() to a PCI_FIND_NEXT_CAP() macro that
takes a config space accessor function so we can also use it in cases
where the usual config accessors aren't available (Hans Zhang)
- Similarly convert pci_find_next_ext_capability() to a
PCI_FIND_NEXT_EXT_CAP() macro (Hans Zhang)
- Implement dwc, dwc endpoint, and cadence capability search interfaces on
top of PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP(), replacing the
previous duplicated code (Hans Zhang)
- Search for capabilities in the cadence core instead of hard-coding their
offsets, which are subject to change (Hans Zhang)
* pci/capability-search:
PCI: cadence: Use cdns_pcie_find_*capability() to avoid hardcoding offsets
PCI: cadence: Implement capability search using PCI core APIs
PCI: dwc: ep: Implement capability search using PCI core APIs
PCI: dwc: Implement capability search using PCI core APIs
PCI: Refactor extended capability search into PCI_FIND_NEXT_EXT_CAP()
PCI: Refactor capability search into PCI_FIND_NEXT_CAP()
PCI: Clean up __pci_find_next_cap_ttl() readability
|
|
- Replace manual locks with guard to simplify code (Erick Karanja)
* pci/switchtec:
PCI: switchtec: Replace manual locks with guard
|
|
- Add rescan/remove locking when enabling/disabling SR-IOV, which solves
list corruption on s390, where disabling SR-IOV also generates hotplug
events (Niklas Schnelle)
- Add lockdep assertion in pci_stop_and_remove_bus_device() to catch
device removal without appropriate locking (Niklas Schnelle)
* pci/virtualization:
PCI: Add lockdep assertion in pci_stop_and_remove_bus_device()
PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV
|
|
- Ensure relaxed tail alignment does not increase min_align when computing
bridge window size, to fix a regression (Ilpo Järvinen)
- Fix bridge window size computation to fix a regression for devices with
undefined PCI class, e.g., Samsung [144d:a5a5] (Ilpo Järvinen)
- Fix error handling during resource resize to fix a regression in amdgpu
(Ilpo Järvinen)
- Align m68k pcibios_enable_device() with other arches (Ilpo Järvinen)
- Remove several sparc pcibios_enable_device() implementations that don't
do anything beyond what pci_enable_resources() does (Ilpo Järvinen)
- Remove mips pcibios_enable_resources() and use pci_enable_resources()
instead (Ilpo Järvinen)
- Refactor and simplify find_bus_resource_of_type() (Ilpo Järvinen)
- Claim bridge windows before setting them up (Ilpo Järvinen)
- Disable non-claimed bridge windows so the kernel's view matches the
hardware configuration (Ilpo Järvinen)
- Use pci_release_resource() instead of release_resource() to reduce code
duplication and increase consistency (Ilpo Järvinen)
- Enable bridges even if bridge window assignment fails (Ilpo Järvinen)
- Preserve bridge window resource type flags when assignment fails because
we may need it later (Ilpo Järvinen)
- Add bridge window selection functions to make the selection consistent
across the several places that do this (Ilpo Järvinen)
- Warn if bridge window cannot be released when resizing BAR (Ilpo
Järvinen)
- Set up bridge resources before enumerating children so we can check
whether child resources are inside bridge windows (Ilpo Järvinen)
* pci/resource:
PCI: Set up bridge resources earlier
PCI: Don't print stale information about resource
PCI: Alter misleading recursion to pci_bus_release_bridge_resources()
PCI: Pass bridge window to pci_bus_release_bridge_resources()
PCI: Add pci_setup_one_bridge_window()
PCI: Refactor remove_dev_resources() to use pbus_select_window()
PCI: Refactor distributing available memory to use loops
PCI: Use pbus_select_window_for_type() during mem window sizing
PCI: Use pbus_select_window() in space available checker
PCI: Rename resource variable from r to res
PCI: Use pbus_select_window_for_type() during IO window sizing
PCI: Use pbus_select_window() during BAR resize
PCI: Warn if bridge window cannot be released when resizing BAR
PCI: Fix finding bridge window in pci_reassign_bridge_resources()
PCI: Add bridge window selection functions
PCI: Add defines for bridge window indexing
PCI: Preserve bridge window resource type flags
PCI: Enable bridge even if bridge window fails to assign
PCI: Use pci_release_resource() instead of release_resource()
PCI: Disable non-claimed bridge window
PCI: Always claim bridge window before its setup
PCI: Refactor find_bus_resource_of_type() logic checks
PCI: Move find_bus_resource_of_type() earlier
MIPS: PCI: Use pci_enable_resources()
sparc/PCI: Remove pcibios_enable_device() as they do nothing extra
m68k/PCI: Use pci_enable_resources() in pcibios_enable_device()
PCI: Fix failure detection during resource resize
PCI: Fix pdev_resources_assignable() disparity
PCI: Ensure relaxed tail alignment does not increase min_align
|
|
- Fix a double cleanup of regulators if devm_add_action_or_reset() fails
(Geert Uytterhoeven)
* pci/pwrctrl:
PCI/pwrctrl: Fix device leak at device stop
PCI/pwrctrl: Fix device and OF node leak at bus scan
PCI/pwrctrl: Fix device leak at registration
PCI/pwrctrl: Fix double cleanup on devm_add_action_or_reset() failure
|
|
- If a device has already been disconnected, e.g., by a hotplug removal,
don't bother trying to resume it to D0 when detaching the driver (Mario
Limonciello)
- Ensure devices are powered up before config reads for 'max_link_width',
'current_link_speed', 'current_link_width', 'secondary_bus_number', and
'subordinate_bus_number' sysfs files (Brian Norris)
* pci/pm:
PCI/sysfs: Ensure devices are powered for config reads
PCI/PM: Skip resuming to D0 if device is disconnected
|
|
- Free struct p2p_pgmap, not a member within it, in the
pci_p2pdma_add_resource() error path (Sungho Kim)
- Make pci_has_p2pmem() static (Leon Romanovsky)
* pci/p2pdma:
PCI/P2PDMA: Reduce scope of pci_has_p2pmem()
PCI/P2PDMA: Fix incorrect pointer usage in devm_kfree() call
|
