| Age | Commit message (Collapse) | Author |
|---|
|
Attribute access is now serialized in the hardware monitoring core,
so locking in the driver code is no longer necessary. Drop it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Attribute access is now serialized in the hardware monitoring core,
so locking in the driver code is no longer necessary. Drop it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Attribute access is now serialized in the hardware monitoring core,
so locking in the driver code is no longer necessary. Drop it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Attribute access is now serialized in the hardware monitoring core,
so locking in the driver code is no longer necessary. Drop it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Attribute access is now serialized in the hardware monitoring core,
so locking in the driver code is no longer necessary. Drop it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This commit address a kernel panic issue that can happen if Userspace
tries to partially unmap a GPU virtual region (aka drm_gpuva).
The VM_BIND interface allows partial unmapping of a BO.
Panthor driver pre-allocates memory for the new drm_gpuva structures
that would be needed for the map/unmap operation, done using drm_gpuvm
layer. It expected that only one new drm_gpuva would be needed on umap
but a partial unmap can require 2 new drm_gpuva and that's why it
ended up doing a NULL pointer dereference causing a kernel panic.
Following dump was seen when partial unmap was exercised.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000078
Mem abort info:
ESR = 0x0000000096000046
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x06: level 2 translation fault
Data abort info:
ISV = 0, ISS = 0x00000046, ISS2 = 0x00000000
CM = 0, WnR = 1, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=000000088a863000
[000000000000078] pgd=080000088a842003, p4d=080000088a842003, pud=0800000884bf5003, pmd=0000000000000000
Internal error: Oops: 0000000096000046 [#1] PREEMPT SMP
<snip>
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : panthor_gpuva_sm_step_remap+0xe4/0x330 [panthor]
lr : panthor_gpuva_sm_step_remap+0x6c/0x330 [panthor]
sp : ffff800085d43970
x29: ffff800085d43970 x28: ffff00080363e440 x27: ffff0008090c6000
x26: 0000000000000030 x25: ffff800085d439f8 x24: ffff00080d402000
x23: ffff800085d43b60 x22: ffff800085d439e0 x21: ffff00080abdb180
x20: 0000000000000000 x19: 0000000000000000 x18: 0000000000000010
x17: 6e656c202c303030 x16: 3666666666646466 x15: 393d61766f69202c
x14: 312d3d7361203a70 x13: 303030323d6e656c x12: ffff80008324bf58
x11: 0000000000000003 x10: 0000000000000002 x9 : ffff8000801a6a9c
x8 : ffff00080360b300 x7 : 0000000000000000 x6 : 000000088aa35fc7
x5 : fff1000080000000 x4 : ffff8000842ddd30 x3 : 0000000000000001
x2 : 0000000100000000 x1 : 0000000000000001 x0 : 0000000000000078
Call trace:
panthor_gpuva_sm_step_remap+0xe4/0x330 [panthor]
op_remap_cb.isra.22+0x50/0x80
__drm_gpuvm_sm_unmap+0x10c/0x1c8
drm_gpuvm_sm_unmap+0x40/0x60
panthor_vm_exec_op+0xb4/0x3d0 [panthor]
panthor_vm_bind_exec_sync_op+0x154/0x278 [panthor]
panthor_ioctl_vm_bind+0x160/0x4a0 [panthor]
drm_ioctl_kernel+0xbc/0x138
drm_ioctl+0x240/0x500
__arm64_sys_ioctl+0xb0/0xf8
invoke_syscall+0x4c/0x110
el0_svc_common.constprop.1+0x98/0xf8
do_el0_svc+0x24/0x38
el0_svc+0x40/0xf8
el0t_64_sync_handler+0xa0/0xc8
el0t_64_sync+0x174/0x178
Signed-off-by: Akash Goel <akash.goel@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Fixes: 647810ec2476 ("drm/panthor: Add the MMU/VM logical block")
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20251017102922.670084-1-akash.goel@arm.com
|
|
Pass up error codes from helper functions rather than discarding them.
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
|
|
During writing, the entire flash page (including OOB) will be updated
with the values from the temporary buffer, so we need to fill the
untouched areas of the buffer with 0xff value to prevent accidental
data overwriting.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251012121707.2296160-14-mikhail.kshevetskiy@iopsys.eu
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
driver startup
The spinand driver do 3 type of dirmap requests:
* read/write whole flash page without oob
(offs = 0, len = page_size)
* read/write whole flash page including oob
(offs = 0, len = page_size + oob_size)
* read/write oob area only
(offs = page_size, len = oob_size)
The trick is:
* read/write a single "sector"
* set a custom sector size equal to offs + len. It's a bit safer to
rounded up "sector size" value 64.
* set the transfer length equal to custom sector size
And it works!
Thus we can remove a dirty hack that reads flash page settings from
SNFI registers during driver startup. Also airoha_snand_adjust_op_size()
function becomes unnecessary.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Link: https://patch.msgid.link/20251012121707.2296160-13-mikhail.kshevetskiy@iopsys.eu
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Set custom sector size equal to flash page size including oob. Thus we
will always read a single sector. The maximum custom sector size is
8187, so all possible flash sector sizes are supported.
This patch is a necessary step to avoid reading flash page settings
from SNFI registers during driver startup.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251012121707.2296160-12-mikhail.kshevetskiy@iopsys.eu
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
REG_SPI_NFI_SECCUS_SIZE registers
This just reduce the number of modification of REG_SPI_NFI_CNFG and
REG_SPI_NFI_SECCUS_SIZE registers during dirmap operation.
This patch is a necessary step to avoid reading flash page settings
from SNFI registers during driver startup.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251012121707.2296160-11-mikhail.kshevetskiy@iopsys.eu
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
spi-airoha-snfi uses custom sector size in REG_SPI_NFI_SECCUS_SIZE
register, so setting of page/oob sizes in REG_SPI_NFI_PAGEFMT is not
required.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Link: https://patch.msgid.link/20251012121707.2296160-10-mikhail.kshevetskiy@iopsys.eu
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Airoha snfi spi controller supports acceleration of DUAL/QUAD
operations, but does not supports DUAL_IO/QUAD_IO operations.
Luckily DUAL/QUAD operations do the same as DUAL_IO/QUAD_IO ones,
so we can issue corresponding DUAL/QUAD operation instead of
DUAL_IO/QUAD_IO one.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251012121707.2296160-9-mikhail.kshevetskiy@iopsys.eu
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Makes dirmap writing looks similar to dirmap reading. Just a minor
refactoring, no behavior change is expected.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Link: https://patch.msgid.link/20251012121707.2296160-8-mikhail.kshevetskiy@iopsys.eu
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The code switches to dma at the start of dirmap operation and returns
to non-dma at the end of dirmap operation, so an additional switch to
non-dma at the start of dirmap write is not required.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251012121707.2296160-5-mikhail.kshevetskiy@iopsys.eu
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The "length < 160" restriction is not needed because airoha_snand_write_data()
and airoha_snand_read_data() will properly handle data transfers above
SPI_MAX_TRANSFER_SIZE.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251012121707.2296160-3-mikhail.kshevetskiy@iopsys.eu
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>:
This series contains patches to update rpmh-regulator driver and
dt-bindings for supporting the PMIC voltage regulators present on the
boards with Qualcomm's next gen compute SoC - Glymur.
Device tree changes aren't part of this series and will be posted
separately after the official announcement of the Glymur SoC.
|
|
The v4l2_m2m_buf_copy_metadata() function takes a boolean
copy_frame_flags argument. When true, it causes the function to copy the
V4L2_BUF_FLAG_KEYFRAME, V4L2_BUF_FLAG_BFRAME and V4L2_BUF_FLAG_PFRAME
flags from the output buffer to the capture buffer.
There is no use cases in any upstream driver for copying the flags.
KEY/P/B frames are properties of the bitstream buffer in some formats.
Once decoded, this is no longer a property of the video frame and should
be discarded.
It was considered useful to know if an uncompressed frame was decoded
from a KEY/P/B compressed frame, and to preserve that information if
that same uncompressed frame was passed through another M2M device (e.g.
a scaler). However, the V4L2 documentation makes it clear that the flags
are meant for compressed frames only.
Drop the copy_frame_flags argument from v4l2_m2m_buf_copy_metadata().
The change to drivers was performed with the following Coccinelle
semantic patch:
@@
expression src;
expression dst;
expression flag;
@@
- v4l2_m2m_buf_copy_metadata(src, dst, flag);
+ v4l2_m2m_buf_copy_metadata(src, dst);
include/media/v4l2-mem2mem.h and drivers/media/v4l2-core/v4l2-mem2mem.c
have been updated manually.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR().
This patch fixes this cocci report:
./ipu7/ipu7-isys-csi-phy.c:311:23-30: WARNING: Consider using %pe to print PTR_ERR()
./ipu7/ipu7-isys-csi2.c:59:22-29: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR().
This patch fixes this cocci report:
./ipu3/ipu3.c:534:5-12: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR().
This patch fixes this cocci report:
./platform/ti/cal/cal.c:1111:3-10: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR().
This patch fixes this cocci report:
./platform/samsung/exynos4-is/media-dev.c:1337:16-23: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR().
This patch fixes this cocci report:
./platform/rockchip/rkisp1/rkisp1-isp.c:940:3-10: WARNING: Consider using %pe to print PTR_ERR()
./platform/rockchip/rkisp1/rkisp1-csi.c:372:3-10: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR().
This patch fixes this cocci report:
./platform/renesas/vsp1/vsp1_drv.c:958:4-11: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR().
This patch fixes this cocci report:
./platform/renesas/rzg2l-cru/rzg2l-csi2.c:307:30-37: WARNING: Consider using %pe to print PTR_ERR()
./platform/renesas/rzg2l-cru/rzg2l-csi2.c:726:30-37: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR().
This patch fixes this cocci report:
./platform/nxp/imx8mq-mipi-csi2.c:422:23-30: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Martin Kepplinger-Novakovic <martink@posteo.de>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR().
This patch fixes this cocci report:
./platform/mediatek/vcodec/common/mtk_vcodec_dbgfs.c:187:3-10: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR().
This patch fixes this cocci report:
./pci/intel/ipu6/ipu6-isys-csi2.c:91:22-29: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR().
This patch fixes this cocci report:
./pci/intel/ipu3/ipu3-cio2.c:318:19-26: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR().
This patch fixes this cocci report:
./pci/intel/ipu-bridge.c:567:3-10: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR().
This patch fixes this cocci report:
./i2c/st-mipid02.c:751:3-10: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR().
This patch fixes this cocci report:
./i2c/rj54n1cb0c.c:1361:4-11: WARNING: Consider using %pe to print PTR_ERR()
./i2c/rj54n1cb0c.c:1370:4-11: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR().
This patch fixes this cocci report:
./i2c/ov9282.c:1133:3-10: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR().
This patch fixes this cocci report:
./i2c/ov5693.c:1296:9-16: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR().
This patch fixes this cocci report:
./i2c/ov5675.c:1188:9-16: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR().
This patch fixes this cocci report:
./i2c/mt9v111.c:1143:3-10: WARNING: Consider using %pe to print PTR_ERR()
./i2c/mt9v111.c:1151:3-10: WARNING: Consider using %pe to print PTR_ERR()
./i2c/mt9v111.c:1159:3-10: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR().
This patch fixes this cocci report:
./i2c/mt9m111.c:1290:3-10: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR().
This patch fixes this cocci report:
./i2c/max96717.c:653:44-51: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR().
This patch fixes this cocci report:
./i2c/max9286.c:755:7-14: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR().
This patch fixes this cocci report:
./i2c/imx412.c:931:3-10: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR().
This patch fixes this cocci report:
./i2c/imx335.c:1013:3-10: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR().
This patch fixes this cocci report:
./i2c/imx274.c:2038:32-39: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR().
This patch fixes this cocci report:
./i2c/ds90ub953.c:779:44-51: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR().
This patch fixes this cocci report:
./i2c/ds90ub913.c:625:44-51: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR()
This patch fixes this cocci report:
./i2c/ccs/ccs-core.c:3241:3-10: WARNING: Consider using %pe to print PTR_ERR()
./i2c/ccs/ccs-core.c:3298:3-10: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR()
This patch fixes this cocci report:
./i2c/ar0521.c:1113:31-38: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR()
This patch fixes this cocci report:
./i2c/adv7842.c:3470:16-23: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR()
This patch fixes this cocci report:
./dvb-frontends/mn88443x.c:698:3-10: WARNING: Consider using %pe to print PTR_ERR()
./dvb-frontends/mn88443x.c:713:3-10: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR()
This patch fixes this cocci report:
./dvb-core/dvbdev.c:575:48-55: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The v4l2_m2m_get_vq() function never returns NULL.
In the set format handler, the check may have been intended to catch
invalid format types, but that's not needed as the V4L2 core picks the
appropriate VIDIOC_S_FMT ioctl handler based on the format type, so the
type can't be incorrect.
In the get format handler, the return value is not used for any purpose
other than the NULL check, which was therefore probably intended to
catch invalid format types. That's not needed for the same reason as in
the set format handler.
Drop the unneeded return value checks and, as the function has no side
effect, the unneeded function call as well.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
