| Age | Commit message (Collapse) | Author |
|---|
|
Fix cocci warnings to use %pe to print PTR_ERR().
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Closes: https://lore.kernel.org/r/202510231229.Z6TduqZy-lkp@intel.com/
Signed-off-by: Harsh Jain <h.jain@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
rtw89 has several ways of handling TX status report events. The first one
is based on RPP feature which is used by PCIe HCI. The other one depends
on firmware sending a corresponding C2H message, quite similar to what
rtw88 has.
Toggle a bit in the TX descriptor to indicate to the firmware that TX
report for the frame is expected. This will allow handling TX wait skbs
and the ones flagged with IEEE80211_TX_CTL_REQ_TX_STATUS correctly.
Do the bulk of the patch according to the vendor driver for RTL8851BU.
However, there are slight differences in C2H message format between
different types of chips. RTL885xB ones follow format V0. RTL8852C has
format V1, and RTL8922AU has format V2.
Found by Linux Verification Center (linuxtesting.org).
Suggested-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251104135720.321110-6-pchelkin@ispras.ru
|
|
The qm_get_qos_value() function calls bus_find_device_by_name() which
increases the device reference count, but fails to call put_device()
to balance the reference count and lead to a device reference leak.
Add put_device() calls in both the error path and success path to
properly balance the reference count.
Found via static analysis.
Fixes: 22d7a6c39cab ("crypto: hisilicon/qm - add pci bdf number check")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Pass TX status value directly into rtw89_core_tx_wait_complete(). This
will make it a bit in sync with further patches and will give flexibility
in future work. Also use scope based RCU locking which simplifies the
code of the function.
Found by Linux Verification Center (linuxtesting.org).
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251104135720.321110-5-pchelkin@ispras.ru
|
|
rtw89_usb_ops_tx_kick_off() may need to release skb if a failure occurs.
It operates mainly on skbs coming from the core wireless stack and the
ones containing firmware commands.
Use ieee80211_free_txskb() for the former case.
Suggested-by: Ping-Ke Shih <pkshih@realtek.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251104135720.321110-4-pchelkin@ispras.ru
|
|
When there is an attempt to write data and RTW89_FLAG_UNPLUGGED is set,
this means device is disconnected and no urb is submitted. Return
appropriate error code to the caller to properly free the allocated
resources.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 2135c28be6a8 ("wifi: rtw89: Add usb.{c,h}")
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251104135720.321110-3-pchelkin@ispras.ru
|
|
Allow adding rx_skb to rx_free_queue for later reuse on the common error
handling path, otherwise free it.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 2135c28be6a8 ("wifi: rtw89: Add usb.{c,h}")
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251104135720.321110-2-pchelkin@ispras.ru
|
|
Cross timestamping is supported on Agilex5 platform with Synchronized
Multidrop Timestamp Gathering(SMTG) IP. The hardware cross-timestamp
result is made available the applications through the ioctl call
PTP_SYS_OFFSET_PRECISE, which inturn calls stmmac_getcrosststamp().
Device time is stored in the MAC Auxiliary register. The 64-bit System
time (ARM_ARCH_COUNTER) is stored in SMTG IP. SMTG IP is an MDIO device
with 0xC - 0xF MDIO register space holds 64-bit system time.
This commit is similar to following commit for Intel platforms:
Commit 341f67e424e5 ("net: stmmac: Add hardware supported cross-timestamp")
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Link: https://patch.msgid.link/20251101-agilex5_ext-v2-4-a6b51b4dca4d@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Agilex5 supports TCP Segmentation Offload(TSO). This commit enables
TSO for Agilex5 socfpga platforms.
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Link: https://patch.msgid.link/20251101-agilex5_ext-v2-3-a6b51b4dca4d@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Agilex5 supports Time-Based Scheduling(TBS) for Tx queue 6 and Tx
queue 7. This commit enables TBS support for these queues.
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Link: https://patch.msgid.link/20251101-agilex5_ext-v2-2-a6b51b4dca4d@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Agilex5 HPS EMAC uses the dwxgmac-3.10a IP, unlike previous socfpga
platforms which use dwmac1000 IP. Due to differences in platform
configuration, Agilex5 requires a distinct setup.
Introduce a setup_plat_dat() callback in socfpga_dwmac_ops to handle
platform-specific setup. This callback is invoked before
stmmac_dvr_probe() to ensure the platform data is correctly
configured. Also, implemented separate setup_plat_dat() callback for
current socfpga platforms and Agilex5.
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20251101-agilex5_ext-v2-1-a6b51b4dca4d@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
More changes from drivers are coming in, notably:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- iwlwifi: new sniffer API support
* tag 'wireless-next-2025-11-05' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (63 commits)
wifi: ath10k: use = {} to initialize bmi_target_info instead of memset
wifi: ath10k: use = {} to initialize pm_qos_request instead of memset
wifi: ath12k: unassign arvif on scan vdev create failure
wifi: ath12k: enforce vdev limit in ath12k_mac_vdev_create()
wifi: ath12k: Set EHT fixed rates for associated STAs
wifi: ath12k: add EHT rates to ath12k_mac_op_set_bitrate_mask()
wifi: ath12k: Add EHT fixed GI/LTF
wifi: ath12k: Add EHT MCS/NSS rates to Peer Assoc
wifi: ath12k: add EHT rate handling to existing set rate functions
wifi: ath12k: generalize GI and LTF fixed rate functions
wifi: ath12k: fix error handling in creating hardware group
wifi: ath12k: fix reusing m3 memory
wifi: ath12k: fix potential memory leak in ath12k_wow_arp_ns_offload()
wifi: iwlwifi: mld: add null check for kzalloc() in iwl_mld_send_proto_offload()
wifi: iwlwifi: mld: check for NULL pointer after kmalloc
wifi: iwlwifi: cfg: fix a few device names
wifi: iwlwifi: mld: Move EMLSR prints to IWL_DL_EHT
wifi: iwlwifi: disable EHT if the device doesn't allow it
wifi: iwlwifi: bump core version for BZ/SC/DR
wifi: iwlwifi: mld: use FW_CHECK on bad ROC notification
...
====================
Link: https://patch.msgid.link/20251105153537.54096-38-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Just two small fixes:
- ath12k: revert a change that caused performance regressions
- hwsim: don't ignore netns on netlink socket matching
* tag 'wireless-2025-11-05' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211_hwsim: Limit destroy_on_close radio removal to netgroup
Revert "wifi: ath12k: Fix missing station power save configuration"
====================
Link: https://patch.msgid.link/20251105152827.53254-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver calls mfd_add_devices() but fails to call mfd_remove_devices()
in error paths after successful MFD device registration and in the remove
function. This leads to resource leaks where MFD child devices are not
properly unregistered.
Replace mfd_add_devices with devm_mfd_add_devices to automatically
manage the device resources.
Fixes: c96e976d9a05 ("net: wan: framer: Add support for the Lantiq PEF2256 framer")
Suggested-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://patch.msgid.link/20251105034716.662-1-vulab@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The BMSR_LSTATUS define is 0x4 but the "p->phydev.link" variable
is a 1 bit bitfield in a u32. Since 4 doesn't fit in 0-1 range
it means that ".link" is always set to false. Add a !! to fix
this.
[Jakub: According to Maxime the phydev struct isn't really
used and we should consider removing it completely. So not
treating this as a fix.]
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aQSz_euUg0Ja8ZaH@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The device bus LAN ID was obtained from PCI_FUNC(), but when a PF
port is passthrough to a virtual machine, the function number may not
match the actual port index on the device. This could cause the driver
to perform operations such as LAN reset on the wrong port.
Fix this by reading the LAN ID from port status register.
Fixes: a34b3e6ed8fb ("net: txgbe: Store PCI info")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/B60A670C1F52CB8E+20251104062321.40059-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The MLX5E_SHAMPO_WQ_HEADER_PER_PAGE and
MLX5E_SHAMPO_LOG_MAX_HEADER_ENTRY_SIZE macros are used directly in
several places under the assumption that there will always be more
headers per WQE than headers per page. However, this assumption doesn't
hold for 64K page sizes and higher MTUs (> 4K). This can be first
observed during header page allocation: ksm_entries will become 0 during
alignment to MLX5E_SHAMPO_WQ_HEADER_PER_PAGE.
This patch introduces 2 additional members to the mlx5e_shampo_hd struct
which are meant to be used instead of the macrose mentioned above.
When the number of headers per WQE goes below
MLX5E_SHAMPO_WQ_HEADER_PER_PAGE, clamp the number of headers per
page and expand the header size accordingly so that the headers
for one WQE cover a full page.
All the formulas are adapted to use these two new members.
Fixes: 945ca432bfd0 ("net/mlx5e: SHAMPO, Drop info array")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1762238915-1027590-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mlx5e_hw_gro_skb_has_enough_space() uses a formula to check if there is
enough space in the skb frags to store more data. This formula is
incorrect for 64K page sizes and it triggers early GRO session
termination because the first fragment will blow up beyond
GRO_LEGACY_MAX_SIZE.
This patch adds a special case for page sizes >= GRO_LEGACY_MAX_SIZE
(64K) which uses the skb->len instead. Within this context,
the check is safe from fragment overflow because the hardware
will continuously fill the data up to the reservation size of 64K
and the driver will coalesce all data from the same page to the same
fragment. This means that the data will span one fragment or at most
two for such a large page size.
It is expected that the if statement will be optimized out as the
check is done with constants.
Fixes: 92552d3abd32 ("net/mlx5e: HW_GRO cqe handler implementation")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1762238915-1027590-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
HW-GRO is broken on mlx5 for 64K page sizes. The patch in the fixes tag
didn't take into account larger page sizes when doing an align down
of max_ksm_entries. For 64K page size, max_ksm_entries is 0 which will skip
mapping header pages via WQE UMR. This breaks header-data split
and will result in the following syndrome:
mlx5_core 0000:00:08.0 eth2: Error cqe on cqn 0x4c9, ci 0x0, qn 0x1133, opcode 0xe, syndrome 0x4, vendor syndrome 0x32
00000000: 00 00 00 00 04 4a 00 00 00 00 00 00 20 00 93 32
00000010: 55 00 00 00 fb cc 00 00 00 00 00 00 07 18 00 00
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 4a
00000030: 00 00 3b c7 93 01 32 04 00 00 00 00 00 00 bf e0
mlx5_core 0000:00:08.0 eth2: ERR CQE on RQ: 0x1133
Furthermore, the function that fills in WQE UMRs for the headers
(mlx5e_build_shampo_hd_umr()) only supports mapping page sizes that
fit in a single UMR WQE.
This patch goes back to the old non-aligned max_ksm_entries value and it
changes mlx5e_build_shampo_hd_umr() to support mapping a large page over
multiple UMR WQEs.
This means that mlx5e_build_shampo_hd_umr() can now leave a page only
partially mapped. The caller, mlx5e_alloc_rx_hd_mpwqe(), ensures that
there are enough UMR WQEs to cover complete pages by working on
ksm_entries that are multiples of MLX5E_SHAMPO_WQ_HEADER_PER_PAGE.
Fixes: 8a0ee54027b1 ("net/mlx5e: SHAMPO, Simplify UMR allocation for headers")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1762238915-1027590-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ICSSG driver does the initial FDB configuration which
includes setting the control registers. Other run time
management like learning is managed by the PRU's. The default
FDB hash size used by the firmware is 512 slots, which is
currently missing in the current driver. Update the driver
FDB config to include FDB hash size as well.
Please refer trm [1] 6.4.14.12.17 section on how the FDB config
register gets configured. From the table 6-1404, there is a reset
field for FDB_HAS_SIZE which is 4, meaning 1024 slots. Currently
the driver is not updating this reset value from 4(1024 slots) to
3(512 slots). This patch fixes this by updating the reset value
to 512 slots.
[1]: https://www.ti.com/lit/pdf/spruim2
Fixes: abd5576b9c57f ("net: ti: icssg-prueth: Add support for ICSSG switch firmware")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251104104415.3110537-1-m-malladi@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mlx5e_get_module_eeprom_by_page() has weird error handling.
First, it is treating -EINVAL as a special case, but it is unclear why.
Second, it tries to fail "gracefully" by returning the number of bytes
read even in case of an error. This results in wrongly returning
success (0 return value) if the error occurs before any bytes were
read.
Simplify the error handling by returning an error when such occurs. This
also aligns with the error handling we have in mlx5e_get_module_eeprom()
for the old API.
This fixes the following case where the query fails, but userspace
ethtool wrongly treats it as success and dumps an output:
# ethtool -m eth2
netlink warning: mlx5_core: Query module eeprom by page failed, read 0 bytes, err -5
netlink warning: mlx5_core: Query module eeprom by page failed, read 0 bytes, err -5
Offset Values
------ ------
0x0000: 00 00 00 00 05 00 04 00 00 00 00 00 05 00 05 00
0x0010: 00 00 00 00 05 00 06 00 50 00 00 00 67 65 20 66
0x0020: 61 69 6c 65 64 2c 20 72 65 61 64 20 30 20 62 79
0x0030: 74 65 73 2c 20 65 72 72 20 2d 35 00 14 00 03 00
0x0040: 08 00 01 00 03 00 00 00 08 00 02 00 1a 00 00 00
0x0050: 14 00 04 00 08 00 01 00 04 00 00 00 08 00 02 00
0x0060: 0e 00 00 00 14 00 05 00 08 00 01 00 05 00 00 00
0x0070: 08 00 02 00 1a 00 00 00 14 00 06 00 08 00 01 00
Fixes: e109d2b204da ("net/mlx5: Implement get_module_eeprom_by_page()")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Alex Lazar <alazar@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1762265736-1028868-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ptp_clock should never be registered unless it stubs one of gettimex64()
or gettime64() and settime64(). WARN_ON_ONCE and error out if either set
of function pointers is null.
For consistency, n_alarm validation is also folded into the
WARN_ON_ONCE.
Suggested-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Tim Hostetler <thostet@google.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://patch.msgid.link/20251104225915.2040080-1-thostet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
LIBIE_FWLOG is unusable without DEBUG_FS. Mark it in Kconfig.
Fix build error on ixgbe when DEBUG_FS is not set. To not add another
layer of #if IS_ENABLED(LIBIE_FWLOG) in ixgbe fwlog code define debugfs
dentry even when DEBUG_FS isn't enabled. In this case the dummy
functions of LIBIE_FWLOG will be used, so not initialized dentry isn't a
problem.
Fixes: 641585bc978e ("ixgbe: fwlog support for e610")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/lkml/f594c621-f9e1-49f2-af31-23fbcb176058@roeck-us.net/
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20251104172333.752445-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update call sites in the block subsystem to import `ARef` and
`AlwaysRefCounted` from `sync::aref` instead of `types`.
This aligns with the ongoing effort to move `ARef` and
`AlwaysRefCounted` to sync.
Suggested-by: Benno Lossin <lossin@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1173
Signed-off-by: Shankari Anand <shankari.ak0208@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
8 and 16 bit formats use a different layout on
GB20x than they did on prior chips. Add the
corresponding DRM format modifiers to the list of
modifiers supported by the display engine on such
chips, and filter the supported modifiers for each
format based on its bytes per pixel in
nv50_plane_format_mod_supported().
Note this logic will need to be updated when GB10
support is added, since it is a GB20x chip that
uses the pre-GB20x sector layout for all formats.
Fixes: 6cc6e08d4542 ("drm/nouveau/kms: add support for GB20x")
Signed-off-by: James Jones <jajones@nvidia.com>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251030181153.1208-3-jajones@nvidia.com
|
|
Set the DMA mask before calling nvkm_device_ctor(), so that when the
flush page is created in nvkm_fb_ctor(), the allocation will not fail
if the page is outside of DMA address space, which can easily happen if
IOMMU is disable. In such situations, you will get an error like this:
nouveau 0000:65:00.0: DMA addr 0x0000000107c56000+4096 overflow (mask ffffffff, bus limit 0).
Commit 38f5359354d4 ("rm/nouveau/pci: set streaming DMA mask early")
set the mask after calling nvkm_device_ctor(), but back then there was
no flush page being created, which might explain why the mask wasn't
set earlier.
Flush page allocation was added in commit 5728d064190e ("drm/nouveau/fb:
handle sysmem flush page from common code"). nvkm_fb_ctor() calls
alloc_page(), which can allocate a page anywhere in system memory, but
then calls dma_map_page() on that page. But since the DMA mask is still
set to 32, the map can fail if the page is allocated above 4GB. This is
easy to reproduce on systems with a lot of memory and IOMMU disabled.
An alternative approach would be to force the allocation of the flush
page to low memory, by specifying __GFP_DMA32. However, this would
always allocate the page in low memory, even though the hardware can
access high memory.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20251014174512.3172102-1-ttabi@nvidia.com
|
|
In order to get rid of CLK_NR_CLKS and be able to drop it from the
bindings, use rockchip_clk_find_max_clk_id helper to find the highest
clock id.
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251103234032.413563-2-heiko@sntech.de
|
|
Add initial support for suspend and hibernation PM callbacks to QAIC.
The device can be suspended any time in which the data path is not
busy as queued I/O operations are lost on suspension and cannot be
resumed after suspend.
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
Signed-off-by: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251029181808.1216466-1-zachary.mckevitt@oss.qualcomm.com
|
|
On new platforms greater than QM_HW_V3, the migration region has been
relocated from the VF to the PF. The VF's own configuration space is
restored to the complete 64KB, and there is no need to divide the
size of the BAR configuration space equally. The driver should be
modified accordingly to adapt to the new hardware device.
On the older hardware platform QM_HW_V3, the live migration configuration
region is placed in the latter 32K portion of the VF's BAR2 configuration
space. On the new hardware platform QM_HW_V4, the live migration
configuration region also exists in the same 32K area immediately following
the VF's BAR2, just like on QM_HW_V3.
However, access to this region is now controlled by hardware. Additionally,
a copy of the live migration configuration region is present in the PF's
BAR2 configuration space. On the new hardware platform QM_HW_V4, when an
older version of the driver is loaded, it behaves like QM_HW_V3 and uses
the configuration region in the VF, ensuring that the live migration
function continues to work normally. When the new version of the driver is
loaded, it directly uses the configuration region in the PF. Meanwhile,
hardware configuration disables the live migration configuration region
in the VF's BAR2: reads return all 0xF values, and writes are silently
ignored.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Reviewed-by: Shameer Kolothum <shameerkolothum@gmail.com>
Link: https://lore.kernel.org/r/20251030015744.131771-3-liulongfang@huawei.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
Use override credential guards for scoped credential override with
automatic restoration on scope exit.
Link: https://patch.msgid.link/20251103-work-creds-guards-prepare_creds-v1-4-b447b82f2c9b@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
On new platforms greater than QM_HW_V3, the configuration region for the
live migration function of the accelerator device is no longer
placed in the VF, but is instead placed in the PF.
Therefore, the configuration region of the live migration function
needs to be opened when the QM driver is loaded. When the QM driver
is uninstalled, the driver needs to clear this configuration.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Reviewed-by: Shameer Kolothum <shameerkolothum@gmail.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://lore.kernel.org/r/20251030015744.131771-2-liulongfang@huawei.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
Replace system_wq with system_percpu_wq, keeping the same old behavior.
The old wq (system_wq) will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>> ---
Link: https://patch.msgid.link/20251105150826.248673-1-marco.crivellari@suse.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
|
|
The namespaces can access the controller's admin request_queue, and
stale references on the namespaces may exist after tearing down the
controller. Ensure the admin request_queue is active by moving the
controller's 'put' to after all controller references have been released
to ensure no one is can access the request_queue. This fixes a reported
use-after-free bug:
BUG: KASAN: slab-use-after-free in blk_queue_enter+0x41c/0x4a0
Read of size 8 at addr ffff88c0a53819f8 by task nvme/3287
CPU: 67 UID: 0 PID: 3287 Comm: nvme Tainted: G E 6.13.2-ga1582f1a031e #15
Tainted: [E]=UNSIGNED_MODULE
Hardware name: Jabil /EGS 2S MB1, BIOS 1.00 06/18/2025
Call Trace:
<TASK>
dump_stack_lvl+0x4f/0x60
print_report+0xc4/0x620
? _raw_spin_lock_irqsave+0x70/0xb0
? _raw_read_unlock_irqrestore+0x30/0x30
? blk_queue_enter+0x41c/0x4a0
kasan_report+0xab/0xe0
? blk_queue_enter+0x41c/0x4a0
blk_queue_enter+0x41c/0x4a0
? __irq_work_queue_local+0x75/0x1d0
? blk_queue_start_drain+0x70/0x70
? irq_work_queue+0x18/0x20
? vprintk_emit.part.0+0x1cc/0x350
? wake_up_klogd_work_func+0x60/0x60
blk_mq_alloc_request+0x2b7/0x6b0
? __blk_mq_alloc_requests+0x1060/0x1060
? __switch_to+0x5b7/0x1060
nvme_submit_user_cmd+0xa9/0x330
nvme_user_cmd.isra.0+0x240/0x3f0
? force_sigsegv+0xe0/0xe0
? nvme_user_cmd64+0x400/0x400
? vfs_fileattr_set+0x9b0/0x9b0
? cgroup_update_frozen_flag+0x24/0x1c0
? cgroup_leave_frozen+0x204/0x330
? nvme_ioctl+0x7c/0x2c0
blkdev_ioctl+0x1a8/0x4d0
? blkdev_common_ioctl+0x1930/0x1930
? fdget+0x54/0x380
__x64_sys_ioctl+0x129/0x190
do_syscall_64+0x5b/0x160
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f765f703b0b
Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d dd 52 0f 00 f7 d8 64 89 01 48
RSP: 002b:00007ffe2cefe808 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007ffe2cefe860 RCX: 00007f765f703b0b
RDX: 00007ffe2cefe860 RSI: 00000000c0484e41 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000003 R09: 0000000000000000
R10: 00007f765f611d50 R11: 0000000000000202 R12: 0000000000000003
R13: 00000000c0484e41 R14: 0000000000000001 R15: 00007ffe2cefea60
</TASK>
Reported-by: Casey Chen <cachen@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Fixes two issues in intel_pipedmc_irq_handler():
- Removed an extra ']' in the PIPEDMC error and interrupt vector log.
- Corrected the interrupt vector log to print int_vector instead of tmp,
as tmp will be zero in this case.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20251103132337.762156-1-alok.a.tiwari@oracle.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
iommufd returns ENOENT when attempting to unmap a range that is already
empty, while vfio type1 returns success. Fix vfio_compat to match.
Fixes: d624d6652a65 ("iommufd: vfio container FD ioctl compatibility")
Link: https://patch.msgid.link/r/0-v1-76be45eff0be+5d-iommufd_unmap_compat_jgg@nvidia.com
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Alex Mastro <amastro@fb.com>
Reported-by: Alex Mastro <amastro@fb.com>
Closes: https://lore.kernel.org/r/aP0S5ZF9l3sWkJ1G@devgpu012.nha5.facebook.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"Fixes and New Hotkey Support:
- input + dell-wmi-base: Electronic privacy screen on/off hotkey
support
- int3472: Fix unregister double free
- wireless-hotkey: Fix Kconfig typo"
* tag 'platform-drivers-x86-v6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform: x86: Kconfig: fix minor typo in help for WIRELESS_HOTKEY
platform/x86: dell-wmi-base: Handle electronic privacy screen on/off events
Input: Add keycodes for electronic privacy screen on/off hotkeys
MAINTAINERS: Update int3472 maintainers
platform/x86: int3472: Fix double free of GPIO device during unregister
|
|
Replace custom macro with the recently defined INTEL_GPP().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Replace custom macro with the recently defined INTEL_GPP().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Replace custom macro with the recently defined INTEL_GPP().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Replace custom macro with the recently defined INTEL_GPP().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Replace custom macro with the recently defined INTEL_GPP().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Replace custom macro with the recently defined INTEL_GPP().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Replace custom macro with the recently defined INTEL_GPP().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Replace custom macro with the recently defined INTEL_GPP().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Replace custom macro with the recently defined INTEL_GPP().
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
A new macro will be used for the further refactoring of the drivers.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
This exports and calls the pinctrl_provide_dummies() function from
the CIX SKY1 driver.
The reasons are explained in a comment in the commit, in essence the
two pin controllers need to go through explicit state transitions
default->sleep->default despite they only handle one single state
each.
Reviewed-by: Hans Zhang <hans.zhang@cixtech.com>
Reviewed-by: Fugang Duan <fugang.duan@cixtech.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The driver checks the firmware version during initialization.If preemption
is supported, the driver configures preemption accordingly and handles
userspace preemption requests. Otherwise, the driver returns an error for
userspace preemption requests.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251104185340.897560-1-lizhi.hou@amd.com
|
|
It's currently not possible to safely monitor if there's throttling
happening and what are the reasons. The approach of reading the status
and then reading the reasons is not reliable as by the time sysadmin
reads the reason, the throttling could not be happening anymore.
Previous tentative to fix that[1] was breaking the ABI and potentially
sysadmin's scripts. This takes a different approach of adding and
documenting the additional attribute. It's still valuable, though
redundant, to provide the simpler 0/1 interface.
In order to avoid userspace knowledge on the bitmask meaning and to be
able to maintain the kernel side in sync with possible changes in
future, just walk the attribute group and check what are the masks that
match the value read.
[1] https://lore.kernel.org/intel-xe/20241025092238.167042-1-raag.jadav@intel.com/
Cc: Raag Jadav <raag.jadav@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://patch.msgid.link/20251104-gt-throttle-cri-v5-1-4948b060bbfd@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
When transitioning from 5-level to 4-level paging, the existing code
incorrectly accesses page table entries by directly dereferencing CR3 and
applying PAGE_MASK. This approach has several issues:
- __native_read_cr3() returns the raw CR3 register value, which on x86_64
includes not just the physical address but also flags Bits above the
physical address width of the system (i.e. above __PHYSICAL_MASK_SHIFT) are
also not masked.
- The pgd value is masked by PAGE_SIZE which doesn't take into account the
higher bits such as _PAGE_BIT_NOPTISHADOW.
Replace this with proper accessor functions:
- native_read_cr3_pa(): Uses CR3_ADDR_MASK to additionally mask metadata out
of CR3 (like SME or LAM bits). All remaining bits are real address bits or
reserved and must be 0.
- mask pgd value with PTE_PFN_MASK instead of PAGE_MASK, accounting for flags
above bit 51 (_PAGE_BIT_NOPTISHADOW in particular). Bits below 51, but above
the max physical address are reserved and must be 0.
Fixes: cb1c9e02b0c1 ("x86/efistub: Perform 4/5 level paging switch from the stub")
Reported-by: Michael van der Westhuizen <rmikey@meta.com>
Reported-by: Tobias Fleig <tfleig@meta.com>
Co-developed-by: Kiryl Shutsemau <kas@kernel.org>
Signed-off-by: Kiryl Shutsemau <kas@kernel.org>
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20251103141002.2280812-3-usamaarif642@gmail.com
|
