| Age | Commit message (Collapse) | Author |
|---|
|
Currently if a user enqueues a work item using schedule_delayed_work()
the used wq is "system_wq" (per-cpu wq) while queue_delayed_work() uses
WORK_CPU_UNBOUND (used when a CPU is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND. This lack of consistentcy cannot be
addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
Continue the effort to refactor workqueue APIs, which has begun with the
change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
Adds a new WQ_PERCPU flag to explicitly request alloc_workqueue() to be
per-CPU when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20251105150336.244079-1-marco.crivellari@suse.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
With commit 9604eea5bd3a ("scsi: st: Add third party poweron reset
handling") some customer tape applications fail from being unable to
complete ioctls to verify ID information for the device when there has
been any type of reset event to their tape devices.
The st driver currently will fail all standard SCSI ioctls if a call to
flush_buffer() fails in st_ioctl(). This causes ioctls which otherwise
have no effect on tape state to succeed or fail based on events
unrelated to the requested ioctl.
This makes SCSI information ioctls unreliable after a reset even if no
buffering is in use. With a reset setting the pos_unknown field,
flush_buffer() will report failure and fail all ioctls. So any
application expecting to use ioctls to check the identify the device
will be unable to do so in such a state.
For SCSI information ioctls, avoid the need for a buffer flush and allow
the ioctls to execute regardless of buffer state.
Signed-off-by: David Jeffery <djeffery@redhat.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Link: https://patch.msgid.link/20251104154709.6436-2-djeffery@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The st ioctl function currently interleaves code for handling various st
specific ioctls with parts of code needed for handling ioctls common to
all SCSI devices. Separate out st's code for the common ioctls into a
more manageable, separate function.
Signed-off-by: David Jeffery <djeffery@redhat.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Link: https://patch.msgid.link/20251104154709.6436-1-djeffery@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In stex_probe(), register_reboot_notifier() is called at the beginning,
but if any subsequent initialization step fails, the function returns
without unregistering the notifier, resulting in a resource leak.
Add unregister_reboot_notifier() in the out_disable error path to ensure
proper cleanup on all failure paths.
Fixes: 61b745fa63db ("scsi: stex: Add S6 support")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251104094847.270-1-vulab@iscas.ac.cn
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There is one uaf issue in recv_work when running NBD_CLEAR_SOCK and
NBD_CMD_RECONFIGURE:
nbd_genl_connect // conf_ref=2 (connect and recv_work A)
nbd_open // conf_ref=3
recv_work A done // conf_ref=2
NBD_CLEAR_SOCK // conf_ref=1
nbd_genl_reconfigure // conf_ref=2 (trigger recv_work B)
close nbd // conf_ref=1
recv_work B
config_put // conf_ref=0
atomic_dec(&config->recv_threads); -> UAF
Or only running NBD_CLEAR_SOCK:
nbd_genl_connect // conf_ref=2
nbd_open // conf_ref=3
NBD_CLEAR_SOCK // conf_ref=2
close nbd
nbd_release
config_put // conf_ref=1
recv_work
config_put // conf_ref=0
atomic_dec(&config->recv_threads); -> UAF
Commit 87aac3a80af5 ("nbd: call nbd_config_put() before notifying the
waiter") moved nbd_config_put() to run before waking up the waiter in
recv_work, in order to ensure that nbd_start_device_ioctl() would not
be woken up while nbd->task_recv was still uncleared.
However, in nbd_start_device_ioctl(), after being woken up it explicitly
calls flush_workqueue() to make sure all current works are finished.
Therefore, there is no need to move the config put ahead of the wakeup.
Move nbd_config_put() to the end of recv_work, so that the reference is
held for the whole lifetime of the worker thread. This makes sure the
config cannot be freed while recv_work is still running, even if clear
+ reconfigure interleave.
In addition, we don't need to worry about recv_work dropping the last
nbd_put (which causes deadlock):
path A (netlink with NBD_CFLAG_DESTROY_ON_DISCONNECT):
connect // nbd_refs=1 (trigger recv_work)
open nbd // nbd_refs=2
NBD_CLEAR_SOCK
close nbd
nbd_release
nbd_disconnect_and_put
flush_workqueue // recv_work done
nbd_config_put
nbd_put // nbd_refs=1
nbd_put // nbd_refs=0
queue_work
path B (netlink without NBD_CFLAG_DESTROY_ON_DISCONNECT):
connect // nbd_refs=2 (trigger recv_work)
open nbd // nbd_refs=3
NBD_CLEAR_SOCK // conf_refs=2
close nbd
nbd_release
nbd_config_put // conf_refs=1
nbd_put // nbd_refs=2
recv_work done // conf_refs=0, nbd_refs=1
rmmod // nbd_refs=0
Reported-by: syzbot+56fbf4c7ddf65e95c7cc@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/6907edce.a70a0220.37351b.0014.GAE@google.com/T/
Fixes: 87aac3a80af5 ("nbd: make the config put is called before the notifying the waiter")
Depends-on: e2daec488c57 ("nbd: Fix hungtask when nbd_config_put")
Signed-off-by: Zheng Qixing <zhengqixing@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since commit e88ca24319e4 ("kbuild: consolidate warning flags in
scripts/Makefile.extrawarn"), scripts/Makefile.extrawarn contains all
warnings for the main kernel build, not just warnings enabled by the
values for W=. Rename it to scripts/Makefile.warn to make it clearer
that this Makefile is where all Kbuild warning handling should exist.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251023-rename-scripts-makefile-extrawarn-v1-1-8f7531542169@kernel.org
Signed-off-by: Nicolas Schier <nsc@kernel.org>
|
|
Replace timer_delete_sync() with timer_shutdown_sync() and move
it before list_del_rcu() in wakeup_source_remove() to improve the
cleanup ordering and code clarity.
This ensures that the timer is stopped before removing the wakeup
source from the events list, providing a more logical cleanup
sequence.
While the current ordering is functionally correct, stopping the
timer first makes the cleanup flow more intuitive and follows the
general pattern of disabling active components before removing data
structures.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
[ rjw: Subject and changelog edits ]
Link: https://patch.msgid.link/20251027044127.2456365-1-kaushlendra.kumar@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Shared branch between Kbuild and other trees for enabling '-fms-extensions' for 6.19
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nicolas Schier <nsc@kernel.org>
|
|
In preparation for LAN969x support, all instances referring to defines in
the LAN966x specific header were dropped, so its safe to drop its inclusion
in the driver.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://lore.kernel.org/r/20250924202810.1641883-1-robert.marko@sartura.hr
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
The __GFP_NOWARN flag was included in GFP_NOWAIT since commit
16f5dfbc851b ("gfp: include __GFP_NOWARN in GFP_NOWAIT"). So
remove the redundant __GFP_NOWARN flag.
Link: https://lore.kernel.org/linux-raid/20251102152540.871568-1-hehuiwen@kylinos.cn
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Reviewed-by: Li Nan <linan122@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
|
|
There is a uaf problem which is found by case 23rdev-lifetime:
Oops: general protection fault, probably for non-canonical address 0xdead000000000122
RIP: 0010:bdi_unregister+0x4b/0x170
Call Trace:
<TASK>
__del_gendisk+0x356/0x3e0
mddev_unlock+0x351/0x360
rdev_attr_store+0x217/0x280
kernfs_fop_write_iter+0x14a/0x210
vfs_write+0x29e/0x550
ksys_write+0x74/0xf0
do_syscall_64+0xbb/0x380
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7ff5250a177e
The sequence is:
1. rdev remove path gets reconfig_mutex
2. rdev remove path release reconfig_mutex in mddev_unlock
3. md stop calls do_md_stop and sets MD_DELETED
4. rdev remove path calls del_gendisk because MD_DELETED is set
5. md stop path release reconfig_mutex and calls del_gendisk again
So there is a race condition we should resolve. This patch adds a
flag MD_DO_DELETE to avoid the race condition.
Link: https://lore.kernel.org/linux-raid/20251029063419.21700-1-xni@redhat.com
Fixes: 9e59d609763f ("md: call del_gendisk in control path")
Signed-off-by: Xiao Ni <xni@redhat.com>
Suggested-by: Yu Kuai <yukuai@fnnas.com>
Reviewed-by: Li Nan <linan122@huawei.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
|
|
This reverts commit ebe755605082eddff80eafe0c50915b1366ee98f.
Tested the latest kernel on my GB203 and this seems to break it somehow.
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: gsp: GSP-FMC boot failed (mbox: 0x0000000b)
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: gsp: init failed, -5
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: init failed with -5
Nov 09 04:16:14 bighp kernel: nouveau: drm:00000000:00000080: init failed with -5
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: drm: Device allocation failed: -5
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: probe with driver nouveau failed with error -5
Not sure why, I went over the patch and thought it should have worked, but there must be some
32-bit problem maybe in the FMC boot path.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Link: https://lore.kernel.org/linux-raid/20250910091912.25624-1-nichen@iscas.ac.cn
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
|
|
All the infrastructure has already been plumbed to support this for
stacked devices, so just enable the request_queue limits features flag.
A note about chunk sectors for linear arrays:
While it is possible to set a chunk sectors param for building a linear
array, this is for specifying the granularity at which data sectors from
the device are used. It is not the same as a stripe size, like for RAID0.
As such, it is not appropriate to set chunk_sectors request queue limit to
the same value, as chunk_sectors request limit is a boundary for which
requests cannot straddle.
However, request_queue limit max_hw_sectors is set to chunk sectors, which
almost has the same effect as setting chunk_sectors limit.
Link: https://lore.kernel.org/linux-raid/20250903161052.3326176-1-john.g.garry@oracle.com
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Yu Kuai <yukuai3@fnnas.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
|
|
In md_check_recovery(), use new helper to make code cleaner.
Link: https://lore.kernel.org/linux-raid/e62894c8-d916-94bc-ef48-3c60e6e1fc5d@huawei.com
Signed-off-by: Wu Guanghao <wuguanghao3@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@fnnas.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
|
|
We attempted to use RCU to protect the pointer 'thread', but directly
passed the value when calling md_wakeup_thread(). This means that the
RCU pointer has been acquired before rcu_read_lock(), which renders
rcu_read_lock() ineffective and could lead to a use-after-free.
Link: https://lore.kernel.org/linux-raid/20251015083227.1079009-1-yun.zhou@windriver.com
Fixes: 446931543982 ("md: protect md_thread with rcu")
Signed-off-by: Yun Zhou <yun.zhou@windriver.com>
Reviewed-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai@fnnas.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
|
|
In sync del gendisk path, it deletes gendisk first and the directory
/sys/block/md is removed. Then it releases mddev kobj in a delayed work.
If we enable debug log in sysfs_remove_group, we can see the debug log
'sysfs group bitmap not found for kobject md'. It's the reason that the
parent kobj has been deleted, so it can't find parent directory.
In creating path, it allocs gendisk first, then adds mddev kobj. So it
should delete mddev kobj before deleting gendisk.
Before commit 9e59d609763f ("md: call del_gendisk in control path"), it
releases mddev kobj first. If the kobj hasn't been deleted, it does clean
job and deletes the kobj. Then it calls del_gendisk and releases gendisk
kobj. So it doesn't need to call kobject_del to delete mddev kobj. After
this patch, in sync del gendisk path, the sequence changes. So it needs
to call kobject_del to delete mddev kobj.
After this patch, the sequence is:
1. kobject del mddev kobj
2. del_gendisk deletes gendisk kobj
3. mddev_delayed_delete releases mddev kobj
4. md_kobj_release releases gendisk kobj
Link: https://lore.kernel.org/linux-raid/20250928012424.61370-1-xni@redhat.com
Fixes: 9e59d609763f ("md: call del_gendisk in control path")
Signed-off-by: Xiao Ni <xni@redhat.com>
Reviewed-by: Li Nan <linan122@huawei.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-11-06 (i40, ice, iavf)
Mohammad Heib introduces a new devlink parameter, max_mac_per_vf, for
controlling the maximum number of MAC address filters allowed by a VF. This
allows administrators to control the VF behavior in a more nuanced manner.
Aleksandr and Przemek add support for Receive Side Scaling of GTP to iAVF
for VFs running on E800 series ice hardware. This improves performance and
scalability for virtualized network functions in 5G and LTE deployments.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
iavf: add RSS support for GTP protocol via ethtool
ice: Extend PTYPE bitmap coverage for GTP encapsulated flows
ice: improve TCAM priority handling for RSS profiles
ice: implement GTP RSS context tracking and configuration
ice: add virtchnl definitions and static data for GTP RSS
ice: add flow parsing for GTP and new protocol field support
i40e: support generic devlink param "max_mac_per_vf"
devlink: Add new "max_mac_per_vf" generic device param
====================
Link: https://patch.msgid.link/20251106225321.1609605-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rather than placing the phy_intf_sel() setup in the ->init() method,
move it to the new ->set_phy_intf_sel() method.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vGy5o-0000000DhQn-34JE@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use stmmac_get_phy_intf_sel() to decode the PHY interface mode to the
phy_intf_sel value, validate the result and use that to set the
control register to select the operating mode for the DWMAC core.
Note that when an unsupported interface mode is used, the array would
decode this to PHY_INTF_SEL_GMII_MII, so preserve this behaviour.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vGy5j-0000000DhQh-2e0x@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the PHY_INTF_SEL_x values directly rather than the driver private
ETH_PHY_SEL_x values. Move the FIELD_PREP() into sti_dwmac_set_mode().
Use dwmac->interface directly.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vGy5e-0000000DhQb-2B7I@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the common dwmac definitions for the PHY interface selection field,
adding MII_PHY_SEL_VAL() temporarily to avoid line wrapping.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vGy5Z-0000000DhQV-1e2l@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the configuration of the dwmac PHY interface selection to the new
->set_phy_intf_sel() method.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vGy5U-0000000DhQP-19Hd@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Validate the phy_intf_sel value rather than the PHY interface mode.
This will allow us to transition to the ->set_phy_intf_sel() method.
Note that this will allow GMII as well as MII as the phy_intf_sel
value is the same for both.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vGy5P-0000000DhQJ-0Oi3@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use stmmac_get_phy_intf_sel() to decode the PHY interface mode to the
phy_intf_sel value, and use the result to program the ethernet mode.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vGy5J-0000000DhQD-46Ob@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the PHY_INTF_SEL_x values directly rather than the driver private
LPC18XX_CREG_CREG6_ETHMODE_x definitions, and convert
LPC18XX_CREG_CREG6_ETHMODE_MASK to use GENMASK().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vGy5E-0000000DhQ7-3cuy@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the common dwmac definitions for the PHY interface selection field.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vGy59-0000000DhQ1-393H@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The lan8814 is a quad-phy and it is using QSGMII towards the MAC.
The problem is that everytime when one of the ports is configured then
the PCS is reseted for all the PHYs. Meaning that the other ports can
loose traffic until the link is establish again.
To fix this, do the reset one time for the entire PHY package.
Fixes: ece19502834d ("net: phy: micrel: 1588 support for LAN8814 phy")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Divya Koppera <Divya.Koppera@microchip.com >
Link: https://patch.msgid.link/20251106090637.2030625-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Two additional bytes in front of each frame received into the RX FIFO if
SHIFT16 is set, so we need to subtract the extra two bytes from pkt_len
to correct the statistic of rx_bytes.
Fixes: 3ac72b7b63d5 ("net: fec: align IP header in hardware")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251106021421.2096585-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For now only tx/rx packets/bytes are reported. This is not compliant
with the PSP Architecture Specification.
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20251106002608.1578518-6-daniel.zahka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add all statistics described under the "Implementation Requirements"
section of the PSP Architecture Specification:
Rx successfully decrypted PSP packets:
psp_rx_pkts : Number of packets decrypted successfully
psp_rx_bytes : Number of bytes decrypted successfully
Rx PSP authentication failure statistics:
psp_rx_pkts_auth_fail : Number of PSP packets that failed authentication
psp_rx_bytes_auth_fail : Number of PSP bytes that failed authentication
Rx PSP bad frame error statistics:
psp_rx_pkts_frame_err;
psp_rx_bytes_frame_err;
Rx PSP drop statistics:
psp_rx_pkts_drop : Number of PSP packets dropped
psp_rx_bytes_drop : Number of PSP bytes dropped
Tx successfully encrypted PSP packets:
psp_tx_pkts : Number of packets encrypted successfully
psp_tx_bytes : Number of bytes encrypted successfully
Tx drops:
tx_drop : Number of misc psp related drops
The above can be seen using the ynl cli:
./pyynl/cli.py --spec netlink/specs/psp.yaml --dump get-stats
Signed-off-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20251106002608.1578518-5-daniel.zahka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All three members are effectively of type bool, so make this explicit
and shrink size of struct fixed_phy_status.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/9eca3d7e-fa64-4724-8fdc-f2c1a8f2ae8f@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enable Open Alliance TC14 (OATC14) 10Base-T1S cable diagnostic feature
for Microchip LAN867x Rev.D0 PHY by implementing `cable_test_start` and
`cable_test_get_status` using the generic C45 functions. This allows the
`ethtool` utility to perform cable diagnostic tests directly on the PHY,
improving network troubleshooting and maintenance.
Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
Link: https://patch.msgid.link/20251105051213.50443-3-parthiban.veerasooran@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for Open Alliance TC14 (OATC14) 10BASE-T1S PHYs cable
diagnostic feature.
This patch implements:
- genphy_c45_oatc14_cable_test_start() to initiate a cable test
- genphy_c45_oatc14_cable_test_get_status() to retrieve test results
- Helper function to map PHY cable test status to ethtool result codes
- Function declarations and exports for use by PHY drivers
This enables ethtool to report ok, open, short, and undetectable cable
conditions on OATC14 10Base-T1S PHYs.
Open Alliance TC14 10BASE-T1S Advanced Diagnostic PHY Features
Specification ref:
https://opensig.org/wp-content/uploads/2025/06/OPEN_Alliance_10BASE-T1S_Advanced_PHY_features_for-automotive_Ethernet_V2.1b.pdf
Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
Link: https://patch.msgid.link/20251105051213.50443-2-parthiban.veerasooran@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Once the netshaper is created for MANA, the current bandwidth
is reported in debugfs like this:
$ sudo ./tools/net/ynl/pyynl/cli.py \
--spec Documentation/netlink/specs/net_shaper.yaml \
--do set \
--json '{"ifindex":'3',
"handle":{ "scope": "netdev", "id":'1' },
"bw-max": 200000000 }'
None
$ sudo cat /sys/kernel/debug/mana/1/vport0/current_speed
200
After the shaper is deleted, it is expected to report
the maximum speed supported by the SKU. But currently it is
reporting 0, which is incorrect.
Fix this inconsistency, by resetting apc->speed to apc->max_speed
during deletion of the shaper object. This will improve
readability and debuggability.
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/1762369468-32570-1-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
EN7581 and AN7583 SoCs are capable of DMA mapping non-linear tx skbs on
non-consecutive DMA descriptors. This feature is useful when multiple
flows are queued on the same hw tx queue since it allows to fully utilize
the available tx DMA descriptors and to avoid the starvation of
high-priority flow we have in the current codebase due to head-of-line
blocking introduced by low-priority flows.
Tested-by: Xuegang Lu <xuegang.lu@airoha.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251106-airoha-tx-linked-list-v2-1-0706d4a322bd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are a few remaining cases where we *do* want to use `as`,
because we specifically want to strip the data that does not fit into
the destination type. Comment these uses to clear confusion about the
intent.
Acked-by: Danilo Krummrich <dakr@kernel.org>
[acourbot@nvidia.com: fix merge conflicts after rebase.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251029-nova-as-v3-6-6a30c7333ad9@nvidia.com>
|
|
Use the newly-introduced `num` module to replace the use of `as`
wherever it is safe to do. This ensures that a given conversion cannot
lose data if its source or destination type ever changes.
Acked-by: Danilo Krummrich <dakr@kernel.org>
[acourbot@nvidia.com: fix merge conflicts after rebase.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251029-nova-as-v3-5-6a30c7333ad9@nvidia.com>
|
|
The core library's `From` implementations do not cover conversions
that are not portable or future-proof. For instance, even though it is
safe today, `From<usize>` is not implemented for `u64` because of the
possibility to support larger-than-64bit architectures in the future.
However, the kernel supports a narrower set of architectures, and in the
case of Nova we only support 64-bit. This makes it helpful and desirable
to provide more infallible conversions, lest we need to rely on the `as`
keyword and carry the risk of silently losing data.
Thus, introduce a new module `num` that provides safe const functions
performing more conversions allowed by the build target, as well as
`FromSafeCast` and `IntoSafeCast` traits that are just extensions of
`From` and `Into` to conversions that are known to be lossless.
Suggested-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/rust-for-linux/DDK4KADWJHMG.1FUPL3SDR26XF@kernel.org/
Acked-by: Danilo Krummrich <dakr@kernel.org>
[acourbot@nvidia.com: fix merge conflicts after rebase.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251029-nova-as-v3-4-6a30c7333ad9@nvidia.com>
|
|
Pull drm fixes from Dave Airlie:
"Back from travel, thanks to Simona for handling things. regular fixes,
seems about the right size, but spread out a bit.
amdgpu has the usual range of fixes, xe has a few fixes, and nouveau
has a couple of fixes, one for blackwell modifiers on 8/16 bit
surfaces.
Otherwise a few small fixes for mediatek, sched, imagination and
pixpaper.
sched:
- Fix deadlock
amdgpu:
- Reset fixes
- Misc fixes
- Panel scaling fixes
- HDMI fix
- S0ix fixes
- Hibernation fix
- Secure display fix
- Suspend fix
- MST fix
amdkfd:
- Process cleanup fix
xe:
- Fix missing synchronization on unbind
- Fix device shutdown when doing FLR
- Fix user fence signaling order
i915:
- Avoid lock inversion when pinning to GGTT on CHV/BXT+VTD
- Fix conversion between clock ticks and nanoseconds
mediatek:
- Disable AFBC support on Mediatek DRM driver
- Add pm_runtime support for GCE power control
imagination:
- kconfig: Fix dependencies
nouveau:
- Set DMA mask earlier
- Advertize correct modifiers for GB20x
pixpaper:
- kconfig: Fix dependencies"
* tag 'drm-fixes-2025-11-08' of https://gitlab.freedesktop.org/drm/kernel: (26 commits)
drm/xe: Enforce correct user fence signaling order using
drm/xe: Do clean shutdown also when using flr
drm/xe: Move declarations under conditional branch
drm/xe/guc: Synchronize Dead CT worker with unbind
drm/amd/display: Enable mst when it's detected but yet to be initialized
drm/amdgpu: Fix wait after reset sequence in S3
drm/amd: Fix suspend failure with secure display TA
drm/amdgpu: fix gpu page fault after hibernation on PF passthrough
drm/tiny: pixpaper: add explicit dependency on MMU
drm/nouveau: Advertise correct modifiers on GB20x
drm: define NVIDIA DRM format modifiers for GB20x
drm/nouveau: set DMA mask before creating the flush page
drm/sched: Fix deadlock in drm_sched_entity_kill_jobs_cb
drm/amd/display: Fix NULL deref in debugfs odm_combine_segments
drm/amdkfd: Don't clear PT after process killed
drm/amdgpu/smu: Handle S0ix for vangogh
drm/amdgpu: Drop PMFW RLC notifier from amdgpu_device_suspend()
drm/amd/display: Fix black screen with HDMI outputs
drm/amd/display: Don't stretch non-native images by default in eDP
drm/amd/pm: fix missing device_attr cleanup in amdgpu_pm_sysfs_init()
...
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Fix missing synchronization on unbind (Balasubramani Vivekanandan)
- Fix device shutdown when doing FLR (Jouni Högander)
- Fix user fence signaling order (Matthew Brost)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/mvfyflloncy76a7nmkatpj6f2afddavwsibz3y4u4wo6gznro5@rdulkuh5wvje
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
- Syzkaller found a case where maths overflows can cause divide by 0
- Typo in a compiler bug warning fix in the selftests broke the
selftests
- type1 compatability had a mismatch when unmapping an already unmapped
range, it should succeed
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Make vfio_compat's unmap succeed if the range is already empty
iommufd/selftest: Fix ioctl return value in _test_cmd_trigger_vevents()
iommufd: Don't overflow during division for dirty tracking
|
|
Add proper error handling and resource cleanup to prevent memory leaks
in add_boot_memory_ranges(). The function now checks for NULL return
from kobject_create_and_add(), uses local buffer for range names to
avoid dynamic allocation, and implements a cleanup path that removes
previously created sysfs groups and kobjects on failure.
This prevents resource leaks when kobject creation or sysfs group
creation fails during boot memory range initialization.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20251030023228.3956296-1-kaushlendra.kumar@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Replace kfree() with ACPI_FREE() in pch_fivr_read() to follow ACPICA
memory management conventions.
While functionally equivalent in Linux (ACPI_FREE() is implemented
as kfree()), using ACPI_FREE() maintains consistency with ACPICA
coding standards for deallocating ACPI buffer objects.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
[ rjw: Subject and changelog edits ]
Link: https://patch.msgid.link/20251028051554.2862049-1-kaushlendra.kumar@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Using the IS_ENABLED() macro in the int340x_thermal_handler_attach()
forces the kernel to be recompiled when thermal drivers are enabled
or disabled, which is a significant limitation of its modularity.
The IS_ENABLED() macro is particularly problematic for the Android
Generic Kernel Image (GKI) project which uses unified core kernel
while SoC/board support is moved to loadable vendor modules.
The Intel Dynamic Platform and Thermal Framework (DPTF) requires
thermal drivers to be loaded at runtime, thus ACPI bus scan handler
is not needed and acpi_default_enumeration() may create all platform
devices, regardless of the actual setting of CONFIG_INT340X_THERMAL.
Signed-off-by: Slawomir Rosek <srosek@google.com>
Link: https://patch.msgid.link/20251103162516.2606158-3-srosek@google.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The IRQ used by the Intel SoC DTS thermal device for critical
overheating notification is listed in _CRS of device INT3401 which
therefore needs to be enumerated for Intel SoC DTS thermal to work.
The enumeration happens by binding the int3401_thermal driver to the
INT3401 platform device. Thus CONFIG_INT340X_THERMAL is in fact
necessary for enumerating it, so checking CONFIG_INTEL_SOC_DTS_THERMAL
in int340x_thermal_handler_attach() is pointless and INT340X_THERMAL
may as well be selected by INTEL_SOC_DTS_THERMAL.
Signed-off-by: Slawomir Rosek <srosek@google.com>
[ rjw: New subject ]
Link: https://patch.msgid.link/20251103162516.2606158-2-srosek@google.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The current code assumes that only DDR errors have split messages. Ensure
proper logging of non-standard event errors that may be split across multiple
messages too.
[ bp: Massage, move comment too, fix it up. ]
Fixes: d5fe2fec6c40 ("EDAC: Add a driver for the AMD Versal NET DDR controller")
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20251023113108.3467132-1-shubhrajyoti.datta@amd.com
|
|
Add test cases to check outcome of fair GuC context or doorbells
IDs allocations for regular and admin-only PF mode.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20251106165932.2143-1-michal.wajdeczko@intel.com
|
|
Instead of trying very hard to find the largest fair number of GuC
doorbell IDs that could be allocated for VFs on the current GT, pick
some smaller rounded down to power-of-two value that is more likely
to be provisioned in the same manner by the other PF instance:
num VFs | num doorbells
--------+--------------
63..32 | 4
31..16 | 8
15..8 | 16
7..4 | 32
3..2 | 64
1 | 128 (regular PF)
1 | 240 (admin only PF)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20251105183253.863-3-michal.wajdeczko@intel.com
|
|
Instead of trying very hard to find the largest fair number of GuC
context IDs that could be allocated for VFs on the current GT, pick
some smaller rounded down to power-of-two value that is more likely
to be provisioned in the same manner by the other PF instance:
num VFs | num contexts
--------+-------------
63..32 | 1024
31..16 | 2048
15..8 | 4096
7..4 | 8192
3..2 | 16384
1 | 32768 (regular PF)
1 | 64512 (admin only PF)
Add also helper function to determine if the PF is admin-only,
and for now use .probe_display flag for that.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20251105183253.863-2-michal.wajdeczko@intel.com
|
