summaryrefslogtreecommitdiff
path: root/drivers/tty/serial
AgeCommit message (Collapse)Author
2019-09-04serial: stm32: select pinctrl state in each suspend/resume functionErwan Le Ray
Select either pinctrl sleep state in suspend function or default state in resume function. Signed-off-by: Bich Hemon <bich.hemon@st.com> Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Link: https://lore.kernel.org/r/1560433800-12255-4-git-send-email-erwan.leray@st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-048250_lpss: check null return when calling pci_ioremap_barNavid Emamdoost
pci_ioremap_bar may return null. This is eventually de-referenced at drivers/dma/dw/core.c:1154 and drivers/dma/dw/core.c:1168. A null check is needed to prevent null de-reference. I am adding the check and in case of failure. Thanks to Andy Shevchenko for the hint on the necessity of pci_iounmap when exiting. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20190719174848.24216-1-navid.emamdoost@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04tty: serial: fsl_lpuart: correct the FIFO depth sizeFugang Duan
VF610/LS1021a/i.MX7ULP/i.MX8QXP reference manual describe the TXFIFOSIZE/RXFIFOSIZE field as below. 000b - FIFO/Buffer depth = 1 dataword. 001b - FIFO/Buffer depth = 4 datawords. 010b - FIFO/Buffer depth = 8 datawords. 011b - FIFO/Buffer depth = 16 datawords. 100b - FIFO/Buffer depth = 32 datawords. 101b - FIFO/Buffer depth = 64 datawords. 110b - FIFO/Buffer depth = 128 datawords. 111b - FIFO/Buffer depth = 256 datawords. (Reserved for VF610) So the FIFO depth should be: 0x1 << (val ? (val + 1) : 0) Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Link: https://lore.kernel.org/r/20190717051930.15514-6-fugang.duan@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04tty: serial: fsl_lpuart: remove sg_set_buf() for sport->rx_sglFugang Duan
Since .sg_init_one() already set sg entry page like below code. sg_init_one() sg_init_table(sg, 1); sg_set_buf(sg, buf, buflen); So it should not set sg entry page again, remove the redundant code. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Link: https://lore.kernel.org/r/20190717051930.15514-5-fugang.duan@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04tty: serial: fsl_lpuart: use kzalloc() instead of kmalloc()Fugang Duan
Use kzalloc() instead of kmalloc() to get clean rx buffer that is useful for DMA mode debug to check the data moving validity. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Link: https://lore.kernel.org/r/20190717051930.15514-4-fugang.duan@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04tty: serial: fsl_lpuart: add earlycon for imx8qxp platformFugang Duan
Add earlycon support for imx8qxp platform. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Link: https://lore.kernel.org/r/20190717051930.15514-3-fugang.duan@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04tty: serial: fsl_lpuart: remove the dev.coherent_dma_mask zero settingFugang Duan
By default, .of_dma_configure() init dev.coherent_dma_mask to BIT(32) that match the eDMA address range. If re-init dev.coherent_dma_mask to zero, then streaming dma mapping will go swiotlb dma_map, if swiotlb is not initalized then it causes mapping failed. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Link: https://lore.kernel.org/r/20190717051930.15514-2-fugang.duan@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04serial: 8250_exar: Use struct_size() helperAndy Shevchenko
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20190721150135.82065-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04serial: 8250: Use dev_get_drvdata where possibleChuhong Yuan
Instead of using to_pci_dev + pci_get_drvdata, use dev_get_drvdata to make code simpler. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Link: https://lore.kernel.org/r/20190724131758.1764-1-hslester96@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04tty: serial: Remove call to memset after pci_alloc_consistentFuqian Huang
pci_alloc_consistent calls dma_alloc_coherent directly. In commit 518a2f1925c3 ("dma-mapping: zero memory returned from dma_alloc_*"), dma_alloc_coherent has already zeroed the memory. So memset is not needed. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Link: https://lore.kernel.org/r/20190715032001.7212-1-huangfq.daxian@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04serial: 8250_omap: Fix idling for unloaded serdev driversTony Lindgren
For many years omap variants have been setting the runtime PM autosuspend delay to -1 to prevent unsafe policy with lossy first character on wake-up. The user must specifically enable the timeout for UARTs if desired. We must not enable the workaround for serdev devices though. It leads into UARTs not idling if no serdev devices are loaded and there is no sysfs entry to configure the UART in that case. And this means that my PM may not work unless the serdev modules are loaded. We can detect a serdev device being configured based on a dts child node, and we can simply skip the workround in that case. And the serdev driver can idle the port during runtime when suitable if an out-of-band wake-up GPIO line exists for example. Let's also add some comments to the workaround while at it. Cc: Johan Hovold <johan@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20190723115400.46432-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-19lockdown: Lock down TIOCSSERIALDavid Howells
Lock down TIOCSSERIAL as that can be used to change the ioport and irq settings on a serial port. This only appears to be an issue for the serial drivers that use the core serial code. All other drivers seem to either ignore attempts to change port/irq or give an error. Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Matthew Garrett <mjg59@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> cc: Jiri Slaby <jslaby@suse.com> Cc: linux-serial@vger.kernel.org Signed-off-by: James Morris <jmorris@namei.org>
2019-08-16tty/serial: remove the ioc3_serial driverChristoph Hellwig
The SGI SN2 support is about to be removed. Remove this driver that depends on the SN2 support. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lkml.kernel.org/r/20190813072514.23299-9-hch@lst.de Signed-off-by: Tony Luck <tony.luck@intel.com>
2019-08-16tty/serial: remove the ioc4_serial driverChristoph Hellwig
The SGI SN2 support is about to be removed. Remove this driver that depends on the SN2 support. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lkml.kernel.org/r/20190813072514.23299-8-hch@lst.de Signed-off-by: Tony Luck <tony.luck@intel.com>
2019-08-16tty/serial: remove the sn_console driverChristoph Hellwig
The SGI SN2 support is about to be removed. Remove this driver that depends on the SN2 support. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lkml.kernel.org/r/20190813072514.23299-7-hch@lst.de Signed-off-by: Tony Luck <tony.luck@intel.com>
2019-08-15serial: lpc32xx: allow compile testingArnd Bergmann
The lpc32xx_loopback_set() function in hte lpc32xx_hs driver is the one thing that relies on platform header files. Move that into the core platform code so we only need a variable declaration for it, and enable COMPILE_TEST building. Link: https://lore.kernel.org/r/20190809144043.476786-12-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-15serial: lpc32xx_hs: allow compile-testingArnd Bergmann
The only thing that prevents building this driver on other platforms is the mach/hardware.h include, which is not actually used here at all, so remove the line and allow CONFIG_COMPILE_TEST. Link: https://lore.kernel.org/r/20190809144043.476786-5-arnd@arndb.de Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-07-30kgdboc: disable the console lock when in kgdbDouglas Anderson
After commit ddde3c18b700 ("vt: More locking checks") kdb / kgdb has become useless because my console is filled with spews of: WARNING: CPU: 0 PID: 0 at .../drivers/tty/vt/vt.c:3846 con_is_visible+0x50/0x74 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.0-rc1+ #48 Hardware name: Rockchip (Device Tree) Backtrace: [<c020ce9c>] (dump_backtrace) from [<c020d188>] (show_stack+0x20/0x24) [<c020d168>] (show_stack) from [<c0a8fc14>] (dump_stack+0xb0/0xd0) [<c0a8fb64>] (dump_stack) from [<c0232c58>] (__warn+0xec/0x11c) [<c0232b6c>] (__warn) from [<c0232dc4>] (warn_slowpath_null+0x4c/0x58) [<c0232d78>] (warn_slowpath_null) from [<c06338a0>] (con_is_visible+0x50/0x74) [<c0633850>] (con_is_visible) from [<c0634078>] (con_scroll+0x108/0x1ac) [<c0633f70>] (con_scroll) from [<c0634160>] (lf+0x44/0x88) [<c063411c>] (lf) from [<c06363ec>] (vt_console_print+0x1a4/0x2bc) [<c0636248>] (vt_console_print) from [<c02f628c>] (vkdb_printf+0x420/0x8a4) [<c02f5e6c>] (vkdb_printf) from [<c02f6754>] (kdb_printf+0x44/0x60) [<c02f6714>] (kdb_printf) from [<c02fa6f4>] (kdb_main_loop+0xf4/0x6e0) [<c02fa600>] (kdb_main_loop) from [<c02fd5f0>] (kdb_stub+0x268/0x398) [<c02fd388>] (kdb_stub) from [<c02f3ba0>] (kgdb_cpu_enter+0x1f8/0x674) [<c02f39a8>] (kgdb_cpu_enter) from [<c02f4330>] (kgdb_handle_exception+0x1c4/0x1fc) [<c02f416c>] (kgdb_handle_exception) from [<c0210fe0>] (kgdb_compiled_brk_fn+0x30/0x3c) [<c0210fb0>] (kgdb_compiled_brk_fn) from [<c020d7ac>] (do_undefinstr+0x180/0x1a0) [<c020d62c>] (do_undefinstr) from [<c0201b44>] (__und_svc_finish+0x0/0x3c) ... [<c02f3224>] (kgdb_breakpoint) from [<c02f3310>] (sysrq_handle_dbg+0x58/0x6c) [<c02f32b8>] (sysrq_handle_dbg) from [<c062abf0>] (__handle_sysrq+0xac/0x154) Let's disable this warning when we're in kgdb to avoid the spew. The whole system is stopped when we're in kgdb so we can't exactly wait for someone else to drop the lock. Presumably the best we can do is to disable the warning and hope for the best. Fixes: ddde3c18b700 ("vt: More locking checks") Cc: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20190725183551.169208-1-dianders@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25tty: serial: netx: Delete driverLinus Walleij
The Netx ARM machine was deleted from the kernel. This driver had no users and has to go. Cc: Robert Schwebel <r.schwebel@pengutronix.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20190722065146.4844-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-19Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC platform updates from Olof Johansson: "SoC platform changes. Main theme this merge window: - The Netx platform (Netx 100/500) platform is removed by Linus Walleij-- the SoC doesn't have active maintainers with hardware, and in discussions with the vendor the agreement was that it's OK to remove. - Russell King has a series of patches that cleans up and refactors SA1101 and RiscPC support" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits) ARM: stm32: use "depends on" instead of "if" after prompt ARM: sa1100: convert to common clock framework ARM: exynos: Cleanup cppcheck shifting warning ARM: pxa/lubbock: remove lubbock_set_misc_wr() from global view ARM: exynos: Only build MCPM support if used arm: add missing include platform-data/atmel.h ARM: davinci: Use GPIO lookup table for DA850 LEDs ARM: OMAP2: drop explicit assembler architecture ARM: use arch_extension directive instead of arch argument ARM: imx: Switch imx7d to imx-cpufreq-dt for speed-grading ARM: bcm: Enable PINCTRL for ARCH_BRCMSTB ARM: bcm: Enable ARCH_HAS_RESET_CONTROLLER for ARCH_BRCMSTB ARM: riscpc: enable chained scatterlist support ARM: riscpc: reduce IRQ handling code ARM: riscpc: move RiscPC assembly files from arch/arm/lib to mach-rpc ARM: riscpc: parse video information from tagged list ARM: riscpc: add ecard quirk for Atomwide 3port serial card MAINTAINERS: mvebu: Add git entry soc: ti: pm33xx: Add a print while entering RTC only mode with DDR in self-refresh ARM: OMAP2+: Make some variables static ...
2019-07-15Merge branch 'for-arm-soc' of git://git.armlinux.org.uk/~rmk/linux-arm into ↵Olof Johansson
arm/soc * 'for-arm-soc' of git://git.armlinux.org.uk/~rmk/linux-arm: (21 commits) ARM: sa1100: convert to common clock framework ARM: riscpc: enable chained scatterlist support ARM: riscpc: reduce IRQ handling code ARM: riscpc: move RiscPC assembly files from arch/arm/lib to mach-rpc ARM: riscpc: parse video information from tagged list ARM: riscpc: add ecard quirk for Atomwide 3port serial card ARM: sa1100/neponset: convert serial to use gpiod APIs ARM: sa1100/hackkit: remove empty serial mctrl functions ARM: sa1100/badge4: remove commented out modem control initialisers ARM: sa1100/h3xxx: convert serial to gpiod APIs ARM: sa1100/assabet: convert serial to gpiod APIs serial: sa1100: add note about modem control signals serial: sa1100: add support for mctrl gpios ARM: riscpc: dma: use __iomem pointers for writing DMA ARM: riscpc: dma: improve address/length writing ARM: riscpc: dma: make state a local variable ARM: riscpc: dma: eliminate "cur_sg" scatterlist usage ARM: riscpc: fix DMA ARM: riscpc: fix ecard printing ARM: riscpc: fix lack of keyboard interrupts after irq conversion ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-15docs: serial: move it to the driver-apiMauro Carvalho Chehab
The contents of this directory is mostly driver-api stuff. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-15docs: arm: convert docs to ReST and rename to *.rstMauro Carvalho Chehab
Converts ARM the text files to ReST, preparing them to be an architecture book. The conversion is actually: - add blank lines and identation in order to identify paragraphs; - fix tables markups; - add some lists markups; - mark literal blocks; - adjust title markups. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Reviewed-by Corentin Labbe <clabbe.montjoie@gmail.com> # For sun4i-ss
2019-07-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull sparc updates from David Miller: "Just a few small changes: - Fix console naming inconsistency with hypervisor consoles, from John Paul Adrian Glaubitz - Fix userland compilation due to use of u_int, from Masahiro Yamada" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Add missing newline at end of file sparc: fix unknown type name u_int in uapi header sparc: configs: Remove useless UEVENT_HELPER_PATH sparc: Remove redundant copy of the LGPL-2.0 sunhv: Fix device naming inconsistency between sunhv_console and sunhv_reg
2019-07-04tty: serial: fsl_lpuart: add imx8qxp supportFugang Duan
The lpuart of imx8ulp is basically the same as imx7ulp, but it has new feature support based on imx7ulp, like it can assert a DMA request on EOP(end-of-packet). imx8ulp lpuart use two clocks, one is ipg bus clock that is used to access registers, the other is baud clock that is used to transmit-receive data. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Link: https://lore.kernel.org/r/20190704134007.2316-1-fugang.duan@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03serial: imx: set_termios(): preserve RTS stateSergey Organov
imx_set_termios() cleared RTS on every call, now fixed. Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sergey Organov <sorganov@gmail.com> Link: https://lore.kernel.org/r/1561558293-7683-5-git-send-email-sorganov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03serial: imx: set_termios(): clarify RTS/CTS bits calculationSergey Organov
Avoid repeating the same code for rs485 twice. Make it obvious we clear CRTSCTS bit in termios->c_cflag whenever sport->have_rtscts is false. Make it obvious we clear UCR2_IRTS whenever CRTSCTS is set. Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sergey Organov <sorganov@gmail.com> Link: https://lore.kernel.org/r/1561558293-7683-4-git-send-email-sorganov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03serial: imx: set_termios(): factor-out 'ucr2' initial valueSergey Organov
Set common bits in a separate statement to make initialization explicit and not repeat the common part. Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sergey Organov <sorganov@gmail.com> Reviewed-by: Uwe Kleine-Knig <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/1561558293-7683-3-git-send-email-sorganov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03serial: sh-sci: Terminate TX DMA during buffer flushingGeert Uytterhoeven
While the .flush_buffer() callback clears sci_port.tx_dma_len since commit 1cf4a7efdc71cab8 ("serial: sh-sci: Fix race condition causing garbage during shutdown"), it does not terminate a transmit DMA operation that may be in progress. Fix this by terminating any pending DMA operations, and resetting the corresponding cookie. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com> Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com> Link: https://lore.kernel.org/r/20190624123540.20629-3-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03serial: sh-sci: Fix TX DMA buffer flushing and workqueue racesGeert Uytterhoeven
When uart_flush_buffer() is called, the .flush_buffer() callback zeroes the tx_dma_len field. This may race with the work queue function handling transmit DMA requests: 1. If the buffer is flushed before the first DMA API call, dmaengine_prep_slave_single() may be called with a zero length, causing the DMA request to never complete, leading to messages like: rcar-dmac e7300000.dma-controller: Channel Address Error happen and, with debug enabled: sh-sci e6e88000.serial: sci_dma_tx_work_fn: ffff800639b55000: 0...0, cookie 126 and DMA timeouts. 2. If the buffer is flushed after the first DMA API call, but before the second, dma_sync_single_for_device() may be called with a zero length, causing the transmit data not to be flushed to RAM, and leading to stale data being output. Fix this by: 1. Letting sci_dma_tx_work_fn() return immediately if the transmit buffer is empty, 2. Extending the critical section to cover all DMA preparational work, so tx_dma_len stays consistent for all of it, 3. Using local copies of circ_buf.head and circ_buf.tail, to make sure they match the actual operation above. Reported-by: Eugeniu Rosca <erosca@de.adit-jv.com> Suggested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com> Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com> Link: https://lore.kernel.org/r/20190624123540.20629-2-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03serial: mpsc: Remove obsolete MPSC driverMark Greer
Support for the Marvell MV64x60 line of bridge chips that contained MPSC controllers has been removed and there are no other components that have that controller so remove its driver. Signed-off-by: Mark Greer <mgreer@animalcreek.com> Link: https://lore.kernel.org/r/20190626160553.28518-1-mgreer@animalcreek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03serial: 8250: 8250_core: Fix missing unlock on error in ↵Wei Yongjun
serial8250_register_8250_port() Add the missing unlock before return from function serial8250_register_8250_port() in the error handling case. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20190703055908.141294-1-weiyongjun1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-21serial: stm32: add RX and TX FIFO flushErwan Le Ray
Adds a flush of RX and TX FIFOs, and fixes some errors: - adds RX FIFO flush in startup fonction - removes the useless transmitter enabling in startup fonction (e.g. receiver only, see Documentation/serial/driver) - configures FIFO threshold before enabling it, rather than after - flushes both TX and RX in set_termios function Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-21serial: stm32: add support of RX FIFO thresholdErwan Le Ray
Adds the support of RX FIFO threshold in order to improve the RX FIFO management. This is done by enabling fifo threshold interrupt, instead of relying on rx empty/fifo not full irq. That basically generates one irq/char currently. With this patch: - RXCFG is set to half fifo size (e.g. 16/2 = 8 data for a 16 data depth FIFO) - irq rate may be reduced by up to 1/RXCFG, e.g. 1 over 8 with current RXCFG setting. - Receiver timeout is used to gather chars when FIFO threshold isn't reached. Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-21serial: stm32: add support of TX FIFO thresholdErwan Le Ray
Adds the support of TX FIFO threshold in order to improve the TX FIFO management: - TX FIFO threshold irq enabling (instead of relying on tx empty / fifo not full irq that generates one irq/char) - TXCFG is set to half fifo size (e.g. 16/2 = 8 data for a 16 data depth FIFO) - irq rate may be reduced by up to 1/TXCFG, e.g. 1 over 8 with current TXCFG setting. Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-21serial: stm32: update PIO transmissionErwan Le Ray
Improves PIO transmission: - Replaces the FIFO filling per character by a filling per blocks of characters, which provides better performances - Replaces the active waiting loop by TX empty interrupt dynamic handling. TXE interrupt is now enabled when data has to be sent (ie when uart_circ is not empty), and inhibited when there is no more data to send (ie when uart_circ is empty). Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-21serial: stm32: add support of timeout interrupt for RXErwan Le Ray
Add support of RX timeout interrupts to limit the number of interrupts. RX timeout is a number of bits (baud clock cycles) without transmission seen in the receiver. One character is used as an arbitrary RX timeout value. If parity is enabled, the number of bits has to include parity bit. Signed-off-by: Gerald Baeza <gerald.baeza@st.com> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-21Revert "serial: 8250: Don't service RX FIFO if interrupts are disabled"Oliver Barta
This reverts commit 2e9fe539108320820016f78ca7704a7342788380. Reading LSR unconditionally but processing the error flags only if UART_IIR_RDI bit was set before in IIR may lead to a loss of transmission error information on UARTs where the transmission error flags are cleared by a read of LSR. Information are lost in case an error is detected right before the read of LSR while processing e.g. an UART_IIR_THRI interrupt. Signed-off-by: Oliver Barta <o.barta89@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Fixes: 2e9fe5391083 ("serial: 8250: Don't service RX FIFO if interrupts are disabled") Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-21tty/serial/8250: use mctrl_gpio helpersYegor Yefremov
This patch permits the usage for GPIOs to control the CTS/RTS/DTR/DSR/DCD/RI signals. Changed by Stefan: Only call mctrl_gpio_init(), if the device has no ACPI companion device to not break existing ACPI based systems. Also only use the mctrl_gpio_ functions when "gpios" is available. Use MSR / MCR <-> TIOCM wrapper functions. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Yegor Yefremov <yegorslists@googlemail.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Giulio Benetti <giulio.benetti@micronovasrl.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-21serial: mctrl_gpio: Check if GPIO property exisits before requesting itStefan Roese
This patch adds a check for the GPIOs property existence, before the GPIO is requested. This fixes an issue seen when the 8250 mctrl_gpio support is added (2nd patch in this patch series) on x86 platforms using ACPI. Here Mika's comments from 2016-08-09: " I noticed that with v4.8-rc1 serial console of some of our Broxton systems does not work properly anymore. I'm able to see output but input does not work. I bisected it down to commit 4ef03d328769eddbfeca1f1c958fdb181a69c341 ("tty/serial/8250: use mctrl_gpio helpers"). The reason why it fails is that in ACPI we do not have names for GPIOs (except when _DSD is used) so we use the "idx" to index into _CRS GPIO resources. Now mctrl_gpio_init_noauto() goes through a list of GPIOs calling devm_gpiod_get_index_optional() passing "idx" of 0 for each. The UART device in Broxton has following (simplified) ACPI description: Device (URT4) { ... Name (_CRS, ResourceTemplate () { GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\_SB.GPO0", 0x00, ResourceConsumer) { 0x003A } GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\_SB.GPO0", 0x00, ResourceConsumer) { 0x003D } }) In this case it finds the first GPIO (0x003A which happens to be RX pin for that UART), turns it into GPIO which then breaks input for the UART device. This also breaks systems with bluetooth connected to UART (those typically have some GPIOs in their _CRS). Any ideas how to fix this? We cannot just drop the _CRS index lookup fallback because that would break many existing machines out there so maybe we can limit this to only DT enabled machines. Or alternatively probe if the property first exists before trying to acquire the GPIOs (using device_property_present()). " This patch implements the fix suggested by Mika in his statement above. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Yegor Yefremov <yegorslists@googlemail.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Giulio Benetti <giulio.benetti@micronovasrl.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-18serial: 8250: pericom_do_set_divisor can be statickbuild test robot
Fixes: 6bf4e42f1d19 ("serial: 8250: Add support for higher baud rates to Pericom chips") Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-18tty: serial_core: Set port active bit in uart_port_activateSerge Semin
A bug was introduced by commit b3b576461864 ("tty: serial_core: convert uart_open to use tty_port_open"). It caused a constant warning printed into the system log regarding the tty and port counter mismatch: [ 21.644197] ttyS ttySx: tty_port_close_start: tty->count = 1 port count = 2 in case if session hangup was detected so the warning is printed starting from the second open-close iteration. Particularly the problem was discovered in situation when there is a serial tty device without hardware back-end being setup. It is considered by the tty-serial subsystems as a hardware problem with session hang up. In this case uart_startup() will return a positive value with TTY_IO_ERROR flag set in corresponding tty_struct instance. The same value will get passed to be returned from the activate() callback and then being returned from tty_port_open(). But since in this case tty_port_block_til_ready() isn't called the TTY_PORT_ACTIVE flag isn't set (while the method had been called before tty_port_open conversion was introduced and the rest of the subsystem code expected the bit being set in this case), which prevents the uart_hangup() method to perform any cleanups including the tty port counter setting to zero. So the next attempt to open/close the tty device will discover the counters mismatch. In order to fix the problem we need to manually set the TTY_PORT_ACTIVE flag in case if uart_startup() returned a positive value. In this case the hang up procedure will perform a full set of cleanup actions including the port ref-counter resetting. Fixes: b3b576461864 "tty: serial_core: convert uart_open to use tty_port_open" Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-18serial: 8250: Add MSR/MCR TIOCM conversion wrapper functionsStefan Roese
This patch adds wrapper functions to convert MSR <-> TIOCM and also MCR <-> TIOCM. These functions are used now in serial8250_do_set_mctrl() and serial8250_do_get_mctrl(). Signed-off-by: Stefan Roese <sr@denx.de> Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Giulio Benetti <giulio.benetti@micronovasrl.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-18serial: 8250: factor out serial8250_{set,clear}_THRI() helpersAndy Shevchenko
Factor out similar code pieces that set or clear UART_IER_THRI bit to serial8250_{set,clear}_THRI() helpers. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-18serial: fsl_lpuart: Remove unneeded OOM error messageFabio Estevam
There is no need to add an out-of-memory error message inside the driver because the core MM code will take care of it. Remove the unneeded OOM error message. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-18serial: uartps: Remove useless return from cdns_uart_poll_put_charNava kishore Manne
There is no reason to call return at the end of function which should return void. The patch is also remove one checkpatch warning: WARNING: void function return statements are not generally useful + return; +} Fixes: 6ee04c6c5488 ("tty: xuartps: Add polled mode support for xuartps") Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-18serial: uartps: Do not add a trailing semicolon to macroNava kishore Manne
This patch fixes this checkpatch warning: WARNING: macros should not use a trailing semicolon +#define to_cdns_uart(_nb) container_of(_nb, struct cdns_uart, \ + clk_rate_change_nb); Fixes: d9bb3fb12685 ("tty: xuartps: Rebrand driver as Cadence UART") Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-18serial: uartps: Fix long line over 80 charsNava kishore Manne
Trivial patch which fixes one checkpatch warning: WARNING: line over 80 characters + !(readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXFULL)) { Fixes: c8dbdc842d30 ("serial: xuartps: Rewrite the interrupt handling logic") Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-18serial: uartps: Fix multiple line dereferenceNava kishore Manne
Trivial patch which fixes this checkpatch warning: WARNING: Avoid multiple line dereference - prefer 'port->state->xmit.tail' + port->state->xmit.buf[port->state->xmit. + tail], port->membase + CDNS_UART_FIFO); Fixes: c8dbdc842d30 ("serial: xuartps: Rewrite the interrupt handling logic") Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-18serial: uartps: Use octal permission for module_param()Nava kishore Manne
Octal permission is preffered compare to symbolic one. This patch fixes checkpatch warnings: Symbolic permissions 'S_IRUGO' are not preferred. Consider using octal permissions '0444'. Fixes: 85baf542d54e ("tty: xuartps: support 64 byte FIFO size") Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2026-07-13 19:15:35 +0000