| Age | Commit message (Collapse) | Author |
|---|
|
Sashiko reported that a buggy or malicious guest VM can flood the host
kernel log by repeatedly sending VF-to-PF messages at a high rate,
degrading host performance and hiding important system logs [1].
Fix by replacing dev_err()/dev_warn() with dev_err_ratelimited(),
limiting output to the default kernel ratelimit. This ensures errors are
still logged for debugging while preventing log flooding attacks.
Link: https://sashiko.dev/#/patchset/20260511080805.2052495-1-wei.fang%40nxp.com #1
Fixes: beb74ac878c8 ("enetc: Add vf to pf messaging support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260520064421.91569-4-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In enetc_pf_probe(), when the memory allocation for pf->vf_state fails,
the code jumps to the error handling label but the variable 'err' is not
assigned an appropriate error code beforehand. This causes the function
to return 0 (success) on an allocation failure path, misleading the
caller into thinking the probe succeeded. So set err to -ENOMEM before
jumping to the error handling label when the allocation for pf->vf_state
returns NULL.
Fixes: e15c5506dd39 ("net: enetc: allocate vf_state during PF probes")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260520064421.91569-3-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are two cases where VFs receive an incorrect success status from
the PF mailbox message handler, misleading them into believing their
requests have been fulfilled:
In enetc_msg_handle_rxmsg(), *status is pre-initialized to
ENETC_MSG_CMD_STATUS_OK. When an unsupported command type is received,
the default case only logs an error without updating *status, so it
remains as ENETC_MSG_CMD_STATUS_OK.
In enetc_msg_pf_set_vf_primary_mac_addr(), when the PF has already
assigned a MAC address for the VF (ENETC_VF_FLAG_PF_SET_MAC is set),
the function rejects the request but returns ENETC_MSG_CMD_STATUS_OK
instead of ENETC_MSG_CMD_STATUS_FAIL.
Therefore, correct the status value for the two cases mentioned above.
Fixes: beb74ac878c8 ("enetc: Add vf to pf messaging support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260520064421.91569-2-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Setting RBUF_EEE_EN | RBUF_PM_EN in RBUF_ENERGY_CTRL breaks the RX
path on GENET hardware once MAC EEE becomes active. RX traffic stops
flowing while the link stays up and the usual descriptor/RX error
counters remain quiet. In that state the MAC still accepts frames
(rbuf_ovflow_cnt keeps climbing) but RBUF no longer forwards them to
DMA, so rx_packets is no longer incremented at the netdev level. On
some boards the corruption ends up as a paging fault in
skb_release_data via bcmgenet_rx_poll on an LPI exit.
Reproduced on Pi 4B (BCM2711 + BCM54213PE) and confirmed by Florian
Fainelli on an internal Broadcom 4908-family board with the same crash
signature. RBUF_PM_EN is not publicly documented.
This shows up more often now that phy_support_eee() enables EEE by
default, but it also affects older kernels as soon as TX LPI is
turned on via ethtool, so it is not specific to recent changes.
Always clear RBUF_EEE_EN | RBUF_PM_EN in bcmgenet_eee_enable_set so
the bits stay off across resets. UMAC and TBUF setup is left alone so
TX-side EEE keeps working.
Link: https://github.com/raspberrypi/linux/issues/7304
Fixes: 6ef398ea60d9 ("net: bcmgenet: add EEE support")
Cc: stable@vger.kernel.org
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260520184320.652053-1-nb@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update the driver for our current coding style according to output from
`checkpatch.pl' and manual code review, where no change to binary code
results, as indicated by `objdump -dr'. Exceptions are as follows:
- incomplete reverse xmas tree in set_multicast_list(), as that would
change binary output,
- referring el3_start_xmit() verbatim rather than via `__func__' with
pr_debug(), likewise,
- a bunch of pr_cont() calls, likewise,
- a long udelay() call in el3_netdev_set_ecmd() made under a spinlock,
likewise plus it's not eligible for conversion to a sleep in the first
place,
- a blank line at the start of a block in el3_interrupt(), to improve
readability where the first statement would otherwise visually merge
with the controlling expression of the enclosing `while' statement.
These issues are benign and depending on circumstances may be adressed
with suitable code refactoring later on.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://patch.msgid.link/alpine.DEB.2.21.2605201208280.1450@angie.orcam.me.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This driver has landed with Linux 0.99.13k, which was covered by the GNU
General Public License version 2, and no further conditions as to
licensing terms have been specified within the copyright notice included
with the driver itself.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://patch.msgid.link/alpine.DEB.2.21.2605201206370.1450@angie.orcam.me.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The transceiver type is held in bits 15:14 of the Address Configuration
Register, with the values of 0b00, 0b01, and 0b11 denoting TP, AUI, and
BNC types respectively. Therefore switching from BNC to AUI requires
bits to be cleared before setting bit 14 or the setting won't change.
NB this has always been wrong ever since this code was added in 2.5.42.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://patch.msgid.link/alpine.DEB.2.21.2605201205160.1450@angie.orcam.me.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 91f3a27ae9f66d81a5906461762c37c8a2bcab06.
Contrary to the assumption stated with the original commit description
this driver is in use and I'm going to maintain it for the foreseeable
future.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://patch.msgid.link/alpine.DEB.2.21.2605201204260.1450@angie.orcam.me.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver passes fw_version directly to devlink_info_version_stored_put()
without ensuring null-termination. While current firmware null-terminates
these strings, the driver should not rely on this behavior. Add explicit
null-termination to prevent potential issues if firmware behavior changes.
Fixes: 45d76f492938 ("pds_core: set up device and adminq")
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Link: https://patch.msgid.link/20260520205842.1486718-1-nikhil.rao@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Hw design requires to disable GDM2 forwarding before configuring GDM2
loopback in airoha_set_gdm2_loopback routine.
Fixes: 9cd451d414f6e ("net: airoha: Add loopback support for GDM2")
Tested-by: Madhur Agrawal <madhur.agrawal@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260520-airoha-disable-gdm2-fwd-v1-1-1eeea5dffc2f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the SIOCGIFHWADDR path, tap_ioctl() copies 16 bytes of an
uninitialised on-stack struct sockaddr_storage to userspace via
ifr_hwaddr, but netif_get_mac_address() only writes sa_family and
dev->addr_len (6 for Ethernet) bytes, leaving sa_data[6..13] uninitialised.
Those 8 trailing bytes leak kernel stack contents; SIOCGIFHWADDR on a
macvtap chardev returns kernel .text and direct-map pointers, defeating
KASLR.
Initialise ss at declaration.
Fixes: 3b23a32a6321 ("net: fix dev_ifsioc_locked() race condition")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260520075736.3415676-3-bestswngs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If one of the later PF or VF CID bitmap allocations fails,
qed_cid_map_alloc() jumps to cid_map_fail and frees the previously
allocated CID bitmaps before returning an error. qed_cxt_tables_alloc()
then calls qed_cxt_mngr_free(), which invokes qed_cid_map_free()
again.
Fix this by setting each CID bitmap pointer to NULL after bitmap_free()
to avoid double free.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc3.
Runtime reproduction was not attempted because exercising the failing
allocation path requires device-specific setup.
Fixes: fe56b9e6a8d9 ("qed: Add module with basic common support")
Cc: stable@vger.kernel.org
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Link: https://patch.msgid.link/20260520070323.2762379-1-dawei.feng@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In mana_hwc_rx_event_handler(), rx_req_idx is derived from
sge->address in DMA-coherent memory. In Confidential VMs
(SEV-SNP/TDX), this memory is shared unencrypted and HW can modify
WQE contents at any time. No bounds check exists on rx_req_idx,
which can lead to an out-of-bounds access into reqs[].
Add bounds check on rx_req_idx in mana_hwc_rx_event_handler() before
using it to index the reqs[] array.
Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Aditya Garg <gargaditya@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/20260520051553.857120-1-gargaditya@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When installing the allmulticast NPC rule, rvu_npc_install_allmulti_entry()
should skip LBK and SDP VFs (only CGX PF/VF may add the entry). The
code combined is_lbk_vf() and is_sdp_vf() with logical AND, which is
never true for a single pcifunc, so the intended early return never ran.
Use logical OR instead.
Cc: Geetha sowjanya <gakula@marvell.com>
Fixes: ae703539f49d2 ("octeontx2-af: Cleanup loopback device checks")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260520043036.1523798-1-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The memory allocated in ipc_protocol_init() is not freed on the error
paths that follow in ipc_imem_init(). Fix that by calling the
corresponding release function ipc_protocol_deinit() in the error path.
Fixes: 3670970dd8c6 ("net: iosm: shared memory IPC interface")
Cc: stable@vger.kernel.org
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Link: https://patch.msgid.link/20260519062815.55545-1-nihaal@cse.iitm.ac.in
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Validate rx-internal-delay-ps and tx-internal-delay-ps against the
hardware capabilities of the EIC7700 MAC.
The programmable RGMII delay supports 20 ps steps and a maximum value of
2540 ps. The driver previously accepted arbitrary values and silently
truncated unsupported settings when converting them to hardware units.
As a result, invalid device tree values could lead to unexpected delay
programming and incorrect RGMII timing.
Reject delay values that are not multiples of 20 ps or exceed the
supported hardware range.
Fixes: ea77dbbdbc4e ("net: stmmac: add Eswin EIC7700 glue driver")
Signed-off-by: Zhi Li <lizhi2@eswincomputing.com>
Link: https://patch.msgid.link/20260518022214.507-1-lizhi2@eswincomputing.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The EIC7700 MAC implements programmable RGMII delay adjustment with a
granularity of 20 ps per hardware step.
The driver previously converted rx-internal-delay-ps and
tx-internal-delay-ps values using a 100 ps step size, resulting in
incorrect delay programming.
Update the conversion to use the correct 20 ps granularity so the
programmed delay matches the values described in the device tree.
Fixes: ea77dbbdbc4e ("net: stmmac: add Eswin EIC7700 glue driver")
Signed-off-by: Zhi Li <lizhi2@eswincomputing.com>
Link: https://patch.msgid.link/20260518022156.484-1-lizhi2@eswincomputing.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Clear the TXD and RXD delay control registers during EIC7700 DWMAC
initialization.
These registers may retain values programmed by the bootloader. If left
unchanged, residual delays can alter the effective RGMII timing seen by
the MAC and override the configuration described by the device tree.
This may violate the expected RGMII timing model and can cause link
instability or prevent the Ethernet controller from operating correctly.
Explicitly clearing these registers ensures that the MAC delay settings
are determined solely by the kernel configuration.
The corresponding register offsets are optional, and the registers are
only cleared when the offsets are provided in the device tree.
Fixes: ea77dbbdbc4e ("net: stmmac: add Eswin EIC7700 glue driver")
Signed-off-by: Zhi Li <lizhi2@eswincomputing.com>
Link: https://patch.msgid.link/20260518022137.464-1-lizhi2@eswincomputing.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix the initialization ordering of the HSP CSR configuration in the
EIC7700 DWMAC glue driver.
The HSP CSR registers control MAC-side RGMII delay behavior and must
only be accessed after the corresponding clocks are enabled. The
previous implementation could trigger register access before clock
enablement, leading to undefined behavior depending on boot state.
Move the HSP CSR configuration into the post-clock-enable initialization
path to ensure all register accesses occur under valid clock domains.
This change ensures deterministic initialization and prevents
clock-dependent register access failures during probe or resume.
Fixes: ea77dbbdbc4e ("net: stmmac: add Eswin EIC7700 glue driver")
Signed-off-by: Zhi Li <lizhi2@eswincomputing.com>
Link: https://patch.msgid.link/20260518022055.444-1-lizhi2@eswincomputing.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Complete error handling for a failed platform_get_irq() call
Fixes: d51b6ce441d3 ("net: ethernet: add ag71xx driver")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20260516212616.11758-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mlx5e_xfrm_add_state() handles acquire-flow temporary SAs by allocating
software state and skipping hardware offload setup.
That path jumps to the common success label before taking the eswitch mode
block. After tunnel-mode validation was moved earlier, the common success
label unconditionally calls mlx5_eswitch_unblock_mode(). For acquire SAs,
this decrements esw->offloads.num_block_mode without a matching increment.
Return directly after installing the acquire SA offload handle, so only the
paths that successfully called mlx5_eswitch_block_mode() call the matching
unblock.
Fixes: 22239eb258bc ("net/mlx5e: Prevent tunnel reformat when tunnel mode not allowed")
Signed-off-by: Prathamesh Deshpande <prathameshdeshpande7@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260510225903.13184-1-prathameshdeshpande7@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git update for v7.1-rc5
ath10k:
- avoid sending any commands to firmware when it is wedged
ath11k:
- fix WMI buffer leaks on error conditions
- fix UAF in RX MSDU coalesce path
- allow peer ID 0 on RX path (legal for mobile devices)
- reinitialize shared SRNG pointers on restart
ath12k:
- fix 20 MHz-only parsing of EHT-MCS map
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
Miri Korenblit says:
====================
wifi: iwlwifi: fixes - 2026-05-16
Contains:
wifi: iwlwifi: mld: fix TSO segmentation explosion when AMSDU is disabled
wifi: iwlwifi: mld: stop TX during firmware restart
wifi: iwlwifi: mld: don't WARN on WoWLAN suspend w/o BSS vif
wifi: iwlwifi: mvm: fix driver-set TX rates on old devices
wifi: iwlwifi: mld: disconnect only after 6 beacons without Rx
wifi: iwlwifi: mld: don't dereference a pointer before NULL checking it
wifi: iwlwifi: use correct function to read STEP_URM register
====================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
wilc_wlan_firmware_download() allocates dma_buffer with kmalloc() at
the top of the function and uses a 'fail:' label to free it via
kfree(dma_buffer) on error.
All later error paths correctly use 'goto fail' to route through this
cleanup. However, the early failure path after the first acquire_bus()
call uses a bare 'return ret;', which leaks dma_buffer whenever the bus
acquire fails.
Replace the early return with goto fail so the existing cleanup path
runs.
Found via a custom Coccinelle semantic patch hunting for kmalloc'd
locals leaked on early-return error paths in driver firmware-download
code.
Fixes: 1241c5650ff7 ("wifi: wilc1000: Fill in missing error handling")
Signed-off-by: Shitalkumar Gandhi <shitalkumar.gandhi@cambiumnetworks.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260511042732.998311-1-shitalkumar.gandhi@cambiumnetworks.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
debugfs_lookup() returns a dentry with an elevated reference count that
must be released with dput(). The current code discards the returned
dentry without calling dput(), causing a reference leak on every
firmware reset recovery.
Additionally, when CONFIG_DEBUG_FS is disabled, debugfs_lookup()
returns ERR_PTR(-ENODEV), not NULL. The current check passes for error
pointers and would call dput() on an invalid pointer, causing a crash.
Fixes: bc90fbe0c318 ("pds_core: Rework teardown/setup flow to be more common")
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Link: https://patch.msgid.link/20260515212907.998028-3-nikhil.rao@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix two cases where pdsc_devcmd_wait() returns stale success from
the completion register instead of an error:
1. FW crash: If firmware stops running, the wait loop breaks early with
running=false. The condition "if ((!done || timeout) && running)" is
false, so error handling is bypassed and stale status is returned.
Check !running first and return -ENXIO.
2. Timeout: If a command times out, err is set to -ETIMEDOUT but then
overwritten by pdsc_err_to_errno(status) which reads stale status.
Return -ETIMEDOUT immediately after cleaning up.
Both errors now propagate to pdsc_devcmd_locked() which queues
health_work for recovery.
Fixes: 45d76f492938 ("pds_core: set up device and adminq")
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Link: https://patch.msgid.link/20260515212907.998028-1-nikhil.rao@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
phy_advertise_eee_all() copies supported_eee into advertising_eee
unconditionally, overwriting any filtering applied during phy_probe()
based on DT eee-broken-* properties or driver-populated
eee_disabled_modes. genphy_c45_ethtool_set_eee() calls this helper
when user space passes an empty advertisement, undoing the filtering.
Apply the same eee_disabled_modes mask in phy_advertise_eee_all() so
the filtering survives the copy, matching the pattern in phy_probe()
and phy_support_eee().
Fixes: b64691274f5d ("net: phy: add helper phy_advertise_eee_all")
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260518-devel-phy-support-eee-fix-v2-2-05b52626fa68@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
phy_support_eee() copies supported_eee into advertising_eee
unconditionally, overwriting any filtering applied during phy_probe()
based on DT eee-broken-* properties or driver-populated
eee_disabled_modes. MAC drivers that call phy_support_eee() after
probe (e.g. bcmgenet, fec, lan743x, lan78xx, r8169) then cause the PHY
to advertise EEE for modes the user marked as broken.
The symptom is that ethtool --show-eee on the local interface reports
"not supported" (supported & ~eee_disabled_modes is empty) while the
link partner sees EEE negotiated and active.
phy_probe() already filters advertising_eee via eee_disabled_modes
after calling of_set_phy_eee_broken(). Apply the same mask in
phy_support_eee() so the filtering survives the copy.
Fixes: 49168d1980e2 ("net: phy: Add phy_support_eee() indicating MAC support EEE")
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260518-devel-phy-support-eee-fix-v2-1-05b52626fa68@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
genphy_c45_an_config_eee_aneg() writes the EEE advertisement to the
auto-negotiation device's MMD register space (MDIO_MMD_AN, register
MDIO_AN_EEE_ADV). These registers are read by the link partner only
during auto-negotiation, so writing them while autoneg is disabled
cannot influence the link. On some PHYs (e.g. Broadcom BCM54213PE)
the write nevertheless reaches the chip and disturbs the receive
datapath.
Concretely, running
ethtool -s eth0 speed 100 duplex full autoneg off
ethtool --set-eee eth0 eee off
leaves eth0 with TX working and RX completely silent on a
Raspberry Pi 4 / CM4 board (bcmgenet + BCM54213PE in rgmii-rxid).
Switching back to autoneg recovers the link.
Prior to commit f26a29a038ee ("net: phy: ensure that genphy_c45_an_config_eee_aneg() sees new value of phydev->eee_cfg.eee_enabled"),
the disable path was effectively a no-op because the helper read
the stale eee_cfg.eee_enabled, so the underlying PHY behavior never
surfaced.
Bisected on rpi-6.12.y between commits 83943264 (good) and
effcbc88 (bad) to f26a29a038ee.
Fixes: f26a29a038ee ("net: phy: ensure that genphy_c45_an_config_eee_aneg() sees new value of phydev->eee_cfg.eee_enabled")
Cc: stable@vger.kernel.org
Signed-off-by: Nerijus Bendžiūnas <nerijus.bendziunas@gmail.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Tested-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260516150251.879680-1-nerijus.bendziunas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
otx2_pool_aq_init() frees pool->stack when mailbox sync or retry
allocation fails, but leaves the pointer unchanged. Later,
otx2_sq_aura_pool_init() unwinds the partial setup through
otx2_aura_pool_free(), which frees pool->stack again. The CN20K-specific
cn20k_pool_aq_init() implementation has the same bug in
its corresponding error path.
Set pool->stack to NULL immediately after the local free so the shared
cleanup path does not free the same stack again while cleaning up
partially initialized pool state.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still present in
v7.1-rc3.
Runtime validation was not performed because reproducing this path
requires OcteonTX2/CN20K hardware.
Fixes: caa2da34fd25 ("octeontx2-pf: Initialize and config queues")
Fixes: d322fbd17203 ("octeontx2-pf: Initialize cn20k specific aura and pool contexts")
Cc: stable@vger.kernel.org
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260515151826.1005397-1-dawei.feng@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
of_count_phandle_with_args() returns the count on success and a negative
errno on failure, including -ENOENT when the "pairsets" property is
absent. The existing comparison in of_load_pse_pis() checks against
ENOENT (positive 2) instead of -ENOENT, so the branch is taken for any
error return: legitimate DTs that omit "pairsets" trigger a spurious
"wrong number of pairsets" error and probe fails with -EINVAL.
Compare against -ENOENT so a missing "pairsets" property is correctly
treated as "this PI has no pairsets, continue".
Fixes: 9be9567a7c59 ("net: pse-pd: Add support for PSE PIs")
Cc: stable@vger.kernel.org
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20260515143103.1721888-1-jelonek.jonas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Antonio Quartulli says:
====================
Included fixes:
* fix TCP selftest failures by reducing number of attempted pings
* fix RCU ptr deref outside of RCU read section
* fix UAF in case of TCP peer failed to be added to hashtable
* fix race condition between iface teardown and new peer being added
* ensure dstats are updated with BH disabled to avoid concurrency
* tag 'ovpn-net-20260514' of https://github.com/OpenVPN/ovpn-net-next:
ovpn: disable BHs when updating device stats
ovpn: fix race between deleting interface and adding new peer
ovpn: respect peer refcount in CMD_NEW_PEER error path
ovpn: tcp - use cached peer pointer in ovpn_tcp_close()
selftests: ovpn: reduce remaining ping flood counts
====================
Link: https://patch.msgid.link/20260514231544.795993-1-antonio@openvpn.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In mana_hwc_rx_event_handler(), resp->response.hwc_msg_id is read from
DMA-coherent memory and bounds-checked, then mana_hwc_handle_resp()
re-reads the same field from the same DMA buffer for test_bit() and
pointer arithmetic.
DMA-coherent memory is mapped uncacheable on x86 and is shared,
unencrypted, in Confidential VMs (SEV-SNP/TDX), so each load goes
directly to host-visible memory. A H/W can modify the value
between the check and the use, bypassing the bounds validation.
Fix this by reading hwc_msg_id exactly once using READ_ONCE() into a
stack-local variable in mana_hwc_rx_event_handler(), and passing the
validated value as a parameter to mana_hwc_handle_resp().
Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Link: https://patch.msgid.link/20260514194156.466823-1-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
With bridge VLAN filtering enabled on a port configured as untagged
member of the bridge PVID, ingress untagged frames do not reach the
corresponding bridge VLAN upper interface (br-lan.<vid>). ARP and
similar traffic is visible on the physical port but not delivered
to the VLAN sub-interface.
The MT7530/MT7531 forwards frames to the CPU port with the user
port's PVID tag applied even when the frame ingressed untagged on
the wire, because the CPU port is set to MT7530_VLAN_EG_CONSISTENT
and is a tagged member of the VLAN entry created for the bridge
VLAN. The DSA core then sees a hwaccel-tagged frame whose VID
matches the port's PVID, which the bridge does not treat as the
untagged-on-the-wire frame that the user expects.
Set ds->untag_vlan_aware_bridge_pvid in the mt7530 and mt7531
setup paths so the DSA core strips that hwaccel tag in software
when the parsed VID matches the bridge port's PVID, restoring the
on-the-wire frame as the bridge expects to see it.
Link: https://github.com/openwrt/openwrt/issues/18576
Fixes: 83163f7dca56 ("net: dsa: mediatek: add VLAN support for MT7530")
Signed-off-by: Edward Parker <edward@topnotchit.com>
[daniel@makrotopia.org: improve commit message]
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/85d25ea1b26d3c907f815649f2e0bde6560282a3.1778766629.git.daniel@makrotopia.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
After a VLAN-aware bridge is destroyed, creating any VLAN-unaware
bridge loses all connectivity. The VID 0 VLAN table entry used by
VLAN-unaware ports in FALLBACK mode gets corrupted during VLAN-aware
operation: mt7530_hw_vlan_add() overwrites its EG_CON flag with
VTAG_EN and bridge teardown removes ports from its PORT_MEM.
The cleanup code that should restore it never runs because the current
port's dp->vlan_filtering flag is still true when checked (DSA updates
it only after the driver callback returns). Even when restored, the
deferred VLAN deletion events from the switchdev workqueue can corrupt
VID 0 again after the restoration.
Skip the current port in the all_user_ports_removed check, call
mt7530_setup_vlan0() to restore the VID 0 entry, and protect VID 0
from being modified by bridge VLAN operations in port_vlan_add and
port_vlan_del since it is managed exclusively by mt7530_setup_vlan0().
Remove the CPU port PCR and PVC register writes which were clobbering
PORT_VLAN mode and VLAN_ATTR with wrong values.
Fixes: 83163f7dca56 ("net: dsa: mediatek: add VLAN support for MT7530")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/da8bdaf08b2427a9057e6cb33e26d41f8a8d5000.1778766629.git.daniel@makrotopia.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The BPC, RGAC1 and RGAC2 registers control the handling of link-local
frames with reserved MAC DAs (01:80:C2:00:00:0x). These frames are
correctly trapped to the CPU port, but the egress VLAN tag attribute was
set to MT7530_VLAN_EG_UNTAGGED which causes the switch to strip any
VLAN tags from trapped frames before they reach the CPU.
This causes VLAN-tagged link-local frames (STP BPDUs, LLDP, PTP Peer
Delay Requests) to arrive at the CPU without their VLAN tag, so they
are delivered to the base network interface instead of the VLAN
sub-interface. The DSA local_termination selftest confirms this: all
link-local protocol tests on VLAN upper interfaces fail.
Set the EG_TAG attribute to MT7530_VLAN_EG_DISABLED (system default)
so that the switch does not modify VLAN tags in trapped frames. This
way VLAN-tagged frames retain their original tag and are delivered to
the correct VLAN sub-interface, matching the behavior of non-trapped
frames which pass through without VLAN tag modification.
Fixes: 69ddba9d170b ("net: dsa: mt7530: fix handling of all link-local frames")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Chester A. Unal <chester.a.unal@arinc9.com>
Link: https://patch.msgid.link/891e0cd34db2a5fe20ceb73283a81fb5f71427ca.1778766629.git.daniel@makrotopia.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The DSA forwarding selftests bridge_vlan_aware.sh and
bridge_vlan_unaware.sh configure the bridge with ageing_time set to
LOW_AGEING_TIME (1000 centiseconds, i.e. 10 seconds) and then run
learning_test() in lib.sh, which expects a learned FDB entry to be
removed after ageing_time + 10 seconds. On MT7530/MT7531 the entry
persisted past the deadline and the "Found FDB record when should
not" assertion failed.
With msecs=10000, the algorithm in mt7530_set_ageing_time() finds
AGE_CNT=0 and AGE_UNIT=9 as the first exact match (starting the
search from tmp_age_count=0). The per-entry aging counter is
initialized to AGE_CNT when a MAC address is learned, so with
AGE_CNT=0 new entries start with a counter value of 0, which the
hardware treats as "already aged" and never removes, effectively
disabling aging.
Fix this by starting the search from tmp_age_count=1 to ensure
entries always have a non-zero initial aging counter. For a
10-second ageing time this yields AGE_CNT=1 and AGE_UNIT=4 instead:
the timer ticks every 5 seconds and entries are removed after 2
ticks.
Starting the search at AGE_CNT=1 raises the minimum representable
ageing time from 1 to 2 seconds. Without bounds, a stale ageing_time
of 1 second would now make the loop fall through without setting
age_count and age_unit, leaving them uninitialized when written to
the MT7530_AAC hardware register. Set ds->ageing_time_min and
ds->ageing_time_max so the DSA core validates the range before the
callback is invoked, and drop the now-redundant range check from
mt7530_set_ageing_time().
Fixes: ea6d5c924e39 ("net: dsa: mt7530: support setting ageing time")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/7788ded12dc07b1bce329ec35fa70f4b45f3f9b7.1778766629.git.daniel@makrotopia.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When igc_fpe_init_tx_descriptor() fails, no one takes care of an
allocated skb, leaking it. [1]
Use dev_kfree_skb_any() on failure.
Tested on an I226 adapter with the following command, while injecting
faults in igc_fpe_init_tx_descriptor() to trigger the error path.
# ethtool --set-mm $DEV verify-enabled on tx-enabled on pmac-enabled on
[1]
unreferenced object 0xffff888113c6cdc0 (size 224):
...
backtrace (crc be3d3fda):
kmem_cache_alloc_node_noprof+0x3b1/0x410
__alloc_skb+0xde/0x830
igc_fpe_xmit_smd_frame.isra.0+0xad/0x1b0
igc_fpe_send_mpacket+0x37/0x90
ethtool_mmsv_verify_timer+0x15e/0x300
Cc: stable@vger.kernel.org
Fixes: 5422570c0010 ("igc: add support for frame preemption verification")
Signed-off-by: Kohei Enju <kohei@enjuk.jp>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260515182419.1597859-10-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sashiko pointed out that igc_fpe_init_smd_frame() initializes
igc_tx_buffer fields for an SMD skb, but does not set the buffer type:
https://sashiko.dev/#/patchset/20260415025226.114115-1-kohei%40enjuk.jp
Since igc_tx_buffer entries are reused, a stale XDP or XSK type can
remain and make TX completion use the wrong cleanup path.
Set the buffer type to IGC_TX_BUFFER_TYPE_SKB.
Fixes: 5422570c0010 ("igc: add support for frame preemption verification")
Signed-off-by: Kohei Enju <kohei@enjuk.jp>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260515182419.1597859-9-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ixgbevf_clean_rx_irq() prunes frames whose source MAC matches the VF's
own address (VEPA multicast workaround) by freeing the skb and
continuing to the next descriptor:
dev_kfree_skb_irq(skb);
continue;
The skb pointer is declared outside the while loop and persists across
iterations. Because the continue skips the "skb = NULL" reset at the
bottom of the loop, the next iteration enters the "else if (skb)" path
and calls ixgbevf_add_rx_frag() on the freed skb, dereferencing
skb_shinfo(skb)->nr_frags - a use-after-free in NAPI softirq context.
The sibling driver iavf already handles this correctly by nulling the
pointer before continuing. Apply the same pattern here.
I do not have ixgbevf hardware; the bug was found by static analysis
(scan_drop_continue_loops.py + semgrep drop_continue_in_loop, multi-tool
corroboration with the highest score in the scan). The UAF was confirmed
under KASAN by loading a test module that reproduces the exact code
pattern (alloc skb, kfree_skb, then read skb_shinfo(skb)->nr_frags):
BUG: KASAN: slab-use-after-free in ixgbevf_uaf_test_init+0x100/0x1000
Read of size 8 at addr 000000006163ae78 by task insmod/30
freed 208-byte region [000000006163adc0, 000000006163ae90)
QEMU emulates igb (82576) but not ixgbe (82599), and the igbvf VF
driver does not include the VEPA source pruning path, so a full
end-to-end reproduction with emulated hardware was not possible.
Fixes: bad17234ba70 ("ixgbevf: Change receive model to use double buffered page based receives")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260515182419.1597859-8-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When ethtool -L changes queue counts, ice_vsi_recfg_qs() closes and
rebuilds the VSI, reallocating Rx rings. The newly allocated rings have
ptp_rx cleared, so RX hardware timestamps are no longer attached to skb
until hwtstamp configuration is applied again.
Restore timestamp mode after ice_vsi_open() in the queue reconfiguration
path, matching reset/rebuild behavior and ensuring newly rebuilt Rx rings
have PTP RX timestamping re-enabled.
Testing hints:
- run ptp4l application in client synchronization mode:
ptp4l -i ethX -m -s
- run PTP traffic
- change queue number on ethX netdev interface:
ethtool -L ethX combined new_queue_size
- observe ptp4l output
- expected result: no "received DELAY_REQ without timestamp" messages
Fixes: 77a781155a65 ("ice: enable receive hardware timestamping")
Cc: stable@vger.kernel.org
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Alexander Nowlin <alexander.nowlin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260515182419.1597859-7-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For E825 2xNAC configurations, PTP semaphore operations must hit the
primary NAC register block so both sides coordinate on the same lock.
Commit e2193f9f9ec9 ("ice: enable timesync operation on 2xNAC E825
devices") updated other primary-only PTP register accesses to
use the primary NAC on non-primary functions, but left ice_ptp_lock()
and ice_ptp_unlock() operating on the local NAC. As a result, secondary
NAC PTP paths can take a different semaphore than the primary side.
Select the primary hardware in ice_ptp_lock() and ice_ptp_unlock() when
the current function is not primary, keeping semaphore operations
symmetric and consistent with the rest of the 2xNAC PTP register access
path.
Fixes: e2193f9f9ec9 ("ice: enable timesync operation on 2xNAC E825 devices")
Reviewed-by: Arkadiusz Kubalewski <Arkadiusz.kubalewski@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Alexander Nowlin <alexander.nowlin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260515182419.1597859-6-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ice_start_phy_timer_eth56g() programs TIMETUS registers and issues
INIT_INCVAL without holding the global PTP semaphore.
This allows concurrent PTP command paths to interleave with PHY timer
start, which can make the sequence fail and leave timer initialization
inconsistent.
Take the PTP lock around TIMETUS registers programming and INIT_INCVAL
command execution, and make sure the lock is released on all error paths.
Keep the subsequent sync step outside of this critical section, since
ice_sync_phy_timer_eth56g() takes the same semaphore internally.
Fixes: 7cab44f1c35f ("ice: Introduce ETH56G PHY model for E825C products")
Reviewed-by: Arkadiusz Kubalewski <Arkadiusz.kubalewski@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Alexander Nowlin <alexander.nowlin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260515182419.1597859-5-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are at least two paths through which VSI promiscuous mode can be
independently configured via ice_fltr_set_vsi_promisc():
- ice_vlan_rx_add_vid() (netdev op)
- ice_service_task() -> ... -> ice_set_promisc()
Both paths may try to program promiscuous mode concurrently. One such
scenario is:
1. Add ice netdev to bond
2. Add the bond netdev to bridge
3. ice netdev enters allmulticast mode (IFF_ALLMULTI)
4. Service task programs promisc mode filter
5. Bridge -> bond calls ice_vlan_rx_add_vid()
Crucially, ice_vlan_rx_add_vid() fails if ice_fltr_set_vsi_promisc()
returns any error, including -EEXIST. This causes VLAN filtering setup
to fail on the bond interface. ice_set_promisc() already handles -EEXIST
correctly.
Fix by adding the same -EEXIST check to ice_vlan_rx_add_vid(): if the
promisc filter is already programmed, continue without returning error.
Fixes: 1273f89578f2 ("ice: Fix broken IFF_ALLMULTI handling")
Cc: stable@vger.kernel.org
Signed-off-by: Marcin Szycik <marcin.szycik@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260515182419.1597859-4-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ice driver's VF queue configuration validation rejects
databuffer_size values below 1024 bytes, which prevents VFs from
using MTU values below 871 bytes.
The iavf driver calculates databuffer_size based on the MTU using:
databuffer_size = ALIGN(MTU + LIBETH_RX_LL_LEN, 128)
where LIBETH_RX_LL_LEN = 26 (ETH_HLEN + 2*VLAN_HLEN + ETH_FCS_LEN).
For MTU values below 871:
MTU 870: 870 + 26 = 896, aligned to 128 = 896 (< 1024, rejected)
MTU 871: 871 + 26 = 897, aligned to 128 = 1024 (>= 1024, accepted)
The 1024-byte minimum seems unnecessarily restrictive, because the hardware
supports databuffer_size as low as 128 bytes (the alignment boundary),
which should allow MTU values down to the standard minimum of 68 bytes.
I haven't found the reason why the limit was configured in the commit
9c7dd7566d18 ("ice: add validation in OP_CONFIG_VSI_QUEUES VF message"), so
with no more information and since it is working, change the minimum
databuffer_size validation from 1024 to 128 bytes to allow standard low
MTU values while still preventing invalid configurations.
Fixes: 9c7dd7566d18 ("ice: add validation in OP_CONFIG_VSI_QUEUES VF message")
cc: stable@vger.kernel.org
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260515182419.1597859-3-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 50327223a8bb ("ice: add lock to protect low latency interface")
introduced a wait queue used to protect the low latency timer interface.
The queue is used with the wait_event_interruptible_locked_irq macro, which
unlocks the wait queue lock while sleeping. The irq variant uses
spin_lock_irq and spin_unlock_irq to manage this. The wait queue lock was
previously locked using spin_lock_irqsave. This difference in lock variants
could lead to issues, since wait_event would unlock the wait queue and
restore interrupts while sleeping.
The ice_read_phy_tstamp_ll_e810() function is ultimately called through
ice_read_phy_tstamp, which is called from ice_ptp_process_tx_tstamp or
ice_ptp_clear_unexpected_tx_ready. The former is called through the
miscellaneous IRQ thread function, while the latter is called from the
service task work queue thread. Neither of these functions has interrupts
disabled, so use spin_lock_irq instead of spin_lock_irqsave.
Fixes: 50327223a8bb ("ice: add lock to protect low latency interface")
Cc: stable@vger.kernel.org
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20250109181823.77f44c69@kernel.org/
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260515182419.1597859-2-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rmnet_dellink() removes the endpoint from the hash table with
hlist_del_init_rcu() and then immediately frees it with kfree(). However,
RCU readers on the receive path (rmnet_rx_handler ->
__rmnet_map_ingress_handler) may still hold a reference to the endpoint and
dereference ep->egress_dev after the memory has been freed. The endpoint is
a kmalloc-32 object, and the stale read at offset 8 corresponds to the
egress_dev pointer.
BUG: unable to handle page fault for address: ffffffffde942eef
Oops: 0002 [#1] SMP NOPTI
CPU: 1 UID: 0 PID: 137 Comm: poc_write Not tainted 7.0.0+ #4 PREEMPTLAZY
RIP: 0010:rmnet_vnd_rx_fixup (rmnet_vnd.c:27)
Call Trace:
<TASK>
__rmnet_map_ingress_handler (rmnet_handlers.c:48 rmnet_handlers.c:101)
rmnet_rx_handler (rmnet_handlers.c:129 rmnet_handlers.c:235)
__netif_receive_skb_core.constprop.0 (net/core/dev.c:6096)
__netif_receive_skb_one_core (net/core/dev.c:6208)
netif_receive_skb (net/core/dev.c:6467)
tun_get_user (drivers/net/tun.c:1955)
tun_chr_write_iter (drivers/net/tun.c:2003)
vfs_write (fs/read_write.c:688)
ksys_write (fs/read_write.c:740)
</TASK>
Add an rcu_head field to struct rmnet_endpoint and replace kfree() with
kfree_rcu() so the endpoint memory remains valid through the RCU grace
period. Also remove the rmnet_vnd_dellink() call and inline only the
nr_rmnet_devs decrement, since rmnet_vnd_dellink() would set
ep->egress_dev to NULL during the grace period, creating a data race
with lockless readers.
Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Link: https://patch.msgid.link/20260514122511.3083479-2-bestswngs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
During napi poll, when the affinity changes and there's still XSK work
to be done, we trigger an ICOSQ interrupt on the new CPU. However, this
triggering on the ICOSQ is done unprotected.
There are 2 such races:
A) mlx5e_trigger_irq() is called while mlx5e_xsk_alloc_rx_mpwqe() is
running from a different CPU due to affinity change. This can happen
because IRQ triggering is done after napi_complete_done(). At this point
the NAPI can be scheduled on a different CPU. Like this:
CPU A (old affinity, NAPI tail) CPU B (new affinity, fresh NAPI)
------------------------------- --------------------------------
napi_complete_done() clears SCHED
mlx5e_cq_arm(...)
napi_schedule_prep() sets SCHED
mlx5e_napi_poll()
mlx5e_xsk_alloc_rx_mpwqe()
mlx5e_icosq_sync_lock() // noop
memcpy 640 B UMR body
advance sq->pc by 10
mlx5e_trigger_irq(&c->icosq)
wqe_info[pi] = {NOP, 1}
mlx5e_post_nop() advances sq->pc
B) mlx5e_trigger_irq() is called on the ICOSQ when
mlx5e_trigger_napi_icosq() is running.
The obvious fix would be to lock the ICOSQ. But ICOSQ has an optimized
locking scheme that doesn't work for this scenario. Kick the async ICOSQ
instead which is always locked.
This issue was noticed in the wild with the following splat:
netdevice: ge-0-0-1: Bad OP in ICOSQ CQE: 0xd
WARNING: drivers/net/ethernet/mellanox/mlx5/core/en_rx.c:826 [...]
[...]
Call Trace:
<IRQ>
mlx5e_napi_poll+0x11d/0x7f0 [mlx5_core]
__napi_poll+0x30/0x200
? skb_defer_free_flush+0x9c/0xc0
net_rx_action+0x2fe/0x3f0
handle_softirqs+0xd8/0x340
__irq_exit_rcu+0xbc/0xe0
common_interrupt+0x85/0xa0
</IRQ>
<TASK>
asm_common_interrupt+0x26/0x40
[...]
---[ end trace 0000000000000000 ]---
mlx5_core 0000:08:00.0 ge-0-0-1: Error cqe on cqn 0x548, ci 0x2022, qn 0x8f4,
opcode 0xd, syndrome 0x2, vendor syndrome 0x68
00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000030: 00 00 00 00 01 00 68 02 01 00 08 f4 de 14 59 d2
WQE DUMP: WQ size 16384 WQ cur size 0, WQE index 0x1e14, len: 64
00000000: 00 00 00 01 d9 ed 80 02 00 00 00 01 d9 ed 90 02
00000010: 00 00 00 01 d9 ed a0 02 00 00 00 01 d9 ed b0 02
00000020: 00 00 00 01 d9 ed c0 02 00 00 00 01 d9 ed d0 02
00000030: 00 00 00 01 d9 ed e0 02 00 00 00 01 d9 ed f0 02
mlx5_core 0000:08:00.0 ge-0-0-1: Error cqe on cqn 0x548, ci 0x2023, qn 0x8f4,
opcode 0xd, syndrome 0x5, vendor syndrome 0xf9
00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000030: 00 00 00 00 01 00 f9 05 01 00 08 f4 de 15 cf d2
Fixes: db05815b36cb ("net/mlx5e: Add XSK zero-copy support")
Reported-by: Paul Saab <ps@mu.org>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260513064613.334602-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When connecting to an AP configured for EHT 20 MHz with a full EHT
MCS/NSS map (supporting MCS 0-13)
Supported EHT-MCS and NSS Set
EHT-MCS Map (BW <= 80MHz): 0x444444
.... .... .... .... .... 0100 = Rx Max Nss That Supports EHT-MCS 0-9: 4
.... .... .... .... 0100 .... = Tx Max Nss That Supports EHT-MCS 0-9: 4
.... .... .... 0100 .... .... = Rx Max Nss That Supports EHT-MCS 10-11: 4
.... .... 0100 .... .... .... = Tx Max Nss That Supports EHT-MCS 10-11: 4
.... 0100 .... .... .... .... = Rx Max Nss That Supports EHT-MCS 12-13: 4
0100 .... .... .... .... .... = Tx Max Nss That Supports EHT-MCS 12-13: 4
TX throughput is observed to be significantly lower than expected.
Investigation shows that TX rates are limited to EHT MCS 11, even though
the AP advertises support for EHT MCS 12/13.
The root cause is an incorrect parsing of the Supported EHT-MCS and NSS
Set element in ath12k_peer_assoc_h_eht().
IEEE Std 802.11be-2024 Figure 9-1074as describes the format for 20
MHz-Only Non-AP STAs.
IEEE Std 802.11be-2024 Figure 9-1074at describes the format for all
other AP and non-AP STAs.
Currently the first format is parsed when the peer advertises no wider
HE channel width support, without considering whether it is an AP or a
non-AP STA. This is incorrect: the peer AP's capabilities must be parsed
using Figure 9-1074at even when it operates on 20 MHz only. Parsing it
as Figure 9-1074as causes rx_tx_mcs13_max_nss to be interpreted as zero,
which is then passed to firmware, leading firmware to assume the peer
does not support MCS 13 and to limit TX rates at MCS 11.
Fix this by parsing the Figure 9-1074as format only when the peer is a
20 MHz-Only non-AP STA, i.e. when the local interface operates as AP or
mesh point.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Fixes: 6c95151e2e77 ("wifi: ath12k: Add EHT MCS/NSS rates to Peer Assoc")
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260514-ath12k-fix-20mhz-only-mcs-map-v1-1-a38d4a9b21a2@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
LMAC rings reuse the shared rdp/wrp pointer buffers without going
through the normal SRNG hw-init path that zeros non-LMAC ring
pointers. After restart, ath11k_hal_srng_clear() can therefore hand
stale hp/tp state from the previous firmware instance back to the new
one.
Clear the shared pointer buffers while keeping the allocations in
place so restart still avoids reallocating SRNG DMA memory, but starts
with fresh ring-pointer state.
Fixes: 32be3ca4cf78b ("wifi: ath11k: HAL SRNG: don't deinitialize and re-initialize again")
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/all/CAOPSVF04q6uvVdq8GTRLHBrVMdpt9=o9wVcFMc6f-yhmSBcZqQ@mail.gmail.com/
Signed-off-by: Kyle Farnung <kfarnung@gmail.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260513-kfarnung-ath11k-srng-clear-pointer-state-v1-1-bc700dd8b333@gmail.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
