summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2021-12-02net: hns3: split function hclge_init_vlan_config()Jian Shen
Currently the function hclge_init_vlan_config() is a bit long. Split it to several small functions, to simplify code and improve code readability. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-02net: hns3: refactor function hns3_fill_skb_desc to simplify codePeng Li
The function hns3_fill_skb_desc is hard to read, this patch extract 2 functions and add new a struct data to simplify the code and Improve readability. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-02net: hns3: extract macro to simplify ring stats update codePeng Li
As the code to update ring stats is alike for different ring stats type, this patch extract macro to simplify ring stats update code. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-01octeontx2-af: Fix a memleak bug in rvu_mbox_init()Zhou Qingyang
In rvu_mbox_init(), mbox_regions is not freed or passed out under the switch-default region, which could lead to a memory leak. Fix this bug by changing 'return err' to 'goto free_regions'. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_OCTEONTX2_AF=y show no new warnings, and our static analyzer no longer warns about this code. Fixes: 98c561116360 (“octeontx2-af: cn10k: Add mbox support for CN10K platform”) Signed-off-by: Zhou Qingyang <zhou1615@umn.edu> Link: https://lore.kernel.org/r/20211130165039.192426-1-zhou1615@umn.edu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-01net/mlx4_en: Fix an use-after-free bug in mlx4_en_try_alloc_resources()Zhou Qingyang
In mlx4_en_try_alloc_resources(), mlx4_en_copy_priv() is called and tmp->tx_cq will be freed on the error path of mlx4_en_copy_priv(). After that mlx4_en_alloc_resources() is called and there is a dereference of &tmp->tx_cq[t][i] in mlx4_en_alloc_resources(), which could lead to a use after free problem on failure of mlx4_en_copy_priv(). Fix this bug by adding a check of mlx4_en_copy_priv() This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_MLX4_EN=m show no new warnings, and our static analyzer no longer warns about this code. Fixes: ec25bc04ed8e ("net/mlx4_en: Add resilience in low memory systems") Signed-off-by: Zhou Qingyang <zhou1615@umn.edu> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20211130164438.190591-1-zhou1615@umn.edu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-01vrf: Reset IPCB/IP6CB when processing outbound pkts in vrf dev xmitStephen Suryaputra
IPCB/IP6CB need to be initialized when processing outbound v4 or v6 pkts in the codepath of vrf device xmit function so that leftover garbage doesn't cause futher code that uses the CB to incorrectly process the pkt. One occasion of the issue might occur when MPLS route uses the vrf device as the outgoing device such as when the route is added using "ip -f mpls route add <label> dev <vrf>" command. The problems seems to exist since day one. Hence I put the day one commits on the Fixes tags. Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Fixes: 35402e313663 ("net: Add IPv6 support to VRF device") Cc: stable@vger.kernel.org Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20211130162637.3249-1-ssuryaextr@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-01net: mvneta: program 1ms autonegotiation clock divisorRussell King
Program the 1ms autonegotiation clock divisor according to the clocking rate of neta - without this, the 1ms clock ticks at about 660us on Armada 38x configured for 250MHz. Bring this into correct specification. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Marek Behún <kabel@kernel.org> Link: https://lore.kernel.org/r/E1ms4WD-00EKLK-Ld@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-01net: phylink: tidy up disable bit clearingRussell King
Tidy up the disable bit clearing where we clear a bit and then run the link resolver. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/E1ms4Rx-00EKEc-En@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-01net: dsa: lantiq: convert to phylink_generic_validate()Russell King (Oracle)
Populate the supported interfaces and MAC capabilities for the Lantiq DSA switches and remove the old validate implementation to allow DSA to use phylink_generic_validate() for this switch driver. The exclusion of Gigabit linkmodes for MII, Reverse MII and Reduced MII links is handled within phylink_generic_validate() in phylink, so there is no need to make them conditional on the interface mode in the driver. Reviewed-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-01net: dsa: hellcreek: convert to phylink_generic_validate()Russell King (Oracle)
Populate the supported interfaces and MAC capabilities for the hellcreek DSA switch and remove the old validate implementation to allow DSA to use phylink_generic_validate() for this switch driver. The switch actually only supports MII and RGMII, but as phylib defaults to GMII, we need to include this interface mode to keep existing DT working. Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-01net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings()Zhou Qingyang
In qlcnic_83xx_add_rings(), the indirect function of ahw->hw_ops->alloc_mbx_args will be called to allocate memory for cmd.req.arg, and there is a dereference of it in qlcnic_83xx_add_rings(), which could lead to a NULL pointer dereference on failure of the indirect function like qlcnic_83xx_alloc_mbx_args(). Fix this bug by adding a check of alloc_mbx_args(), this patch imitates the logic of mbx_cmd()'s failure handling. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_QLCNIC=m show no new warnings, and our static analyzer no longer warns about this code. Fixes: 7f9664525f9c ("qlcnic: 83xx memory map and HW access routine") Signed-off-by: Zhou Qingyang <zhou1615@umn.edu> Link: https://lore.kernel.org/r/20211130110848.109026-1-zhou1615@umn.edu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-01net: mdio: mscc-miim: Add depend of REGMAP_MMIO on MDIO_MSCC_MIIMTianchen Ding
There's build error while CONFIG_REGMAP_MMIO is not set and CONFIG_MDIO_MSCC_MIIM=m. ERROR: modpost: "__devm_regmap_init_mmio_clk" [drivers/net/mdio/mdio-mscc-miim.ko] undefined! Add the depend of REGMAP_MMIO to fix it. Fixes: a27a76282837 ("net: mdio: mscc-miim: convert to a regmap implementation") Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20211130110209.804536-1-dtcccc@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-01net: spider_net: Use non-atomic bitmap API when applicableChristophe JAILLET
No concurrent access is possible when a bitmap is local to a function. So prefer the non-atomic functions to save a few cycles. - replace a 'for' loop by an equivalent non-atomic 'bitmap_fill()' call - use '__set_bit()' While at it, clear the 'bitmask' bitmap only when needed. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/3de0792f5088f00d135c835df6c19e63ae95f5d2.1638026251.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-01iavf: restore MSI state on resetMitch Williams
If the PF experiences an FLR, the VF's MSI and MSI-X configuration will be conveniently and silently removed in the process. When this happens, reset recovery will appear to complete normally but no traffic will pass. The netdev watchdog will helpfully notify everyone of this issue. To prevent such public embarrassment, restore MSI configuration at every reset. For normal resets, this will do no harm, but for VF resets resulting from a PF FLR, this will keep the VF working. Fixes: 5eae00c57f5e ("i40evf: main driver core") Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-01Merge tag 'wireless-drivers-2021-12-01' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.16 First set of fixes for v5.16. Mostly crash and driver initialisation fixes, the fix for rtw89 being most important. iwlwifi * compiler, lockdep and smatch warning fixes * fix for a rare driver initialisation failure * fix a memory leak rtw89 * fix const buffer modification causing a kernel crash mt76 * fix null pointer access * fix idr leak rt2x00 * fix driver initialisation errors, a regression since v5.2-rc1 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-01mlxsw: Use Switch Multicast ID Register Version 2Amit Cohen
The SMID-V2 register maps Multicast ID (MID) into a list of local ports. It is a new version of SMID in order to support 1024 bits of local_port. Add SMID-V2 register and use it instead of SMID. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-01mlxsw: Use Switch Flooding Table Register Version 2Amit Cohen
The SFTR-V2 register is used for flooding packet replication. It is a new version of SFTR in order to support 1024 bits of local_port. Add SFTR-V2 register and use it instead of SFTR. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-01mlxsw: Add support for more than 256 ports in SBSR registerAmit Cohen
Add 'port_page' field in SBSR to be able to query occupancy of more than 256 ports. The field determines the range of the ports specified in the 'ingress_port_mask' and 'egress_port_mask' bit masks: >From '256 * port_page' to '256 * port_page + 255'. For each local port, the appropriate port page is used. A query is never performed for a port range that spans multiple port pages. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-01mlxsw: Use u16 for local_port field instead of u8Amit Cohen
Currently, local_port field is saved as u8, which means that maximum 256 ports can be used. As preparation for Spectrum-4, which will support more than 256 ports, local_port field should be extended. Save local_port as u16 to allow use of additional ports. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-01mlxsw: reg: Adjust PPCNT register to support local port 255Amit Cohen
Local port 255 has a special meaning in PPCNT register, it is used to refer to all local ports. This wild card ability is not currently used by the driver. Special casing local port 255 in Spectrum-4 systems where it is a valid port is going to be a problem. Work around this issue by adding and always setting the 'lp_gl' bit which instructs the device's firmware to treat this local port like an ordinary port. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-01mlxsw: reg: Increase 'port_num' field in PMTDB registerAmit Cohen
'port_num' field is used to indicate the local port value which can be assigned to a module. Increase the field from 8 bits to 10 bits in order to support more than 255 ports. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-01mlxsw: reg: Align existing registers to use extended local_port fieldAmit Cohen
Add support for 10-bit local ports in device registers by making use of the MLXSW_ITEM32_LP() macro that was added in the previous patch. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-01mlxsw: item: Add support for local_port field in a split formAmit Cohen
Currently, local_port field uses 8 bits, which means that maximum 256 ports can be used. As preparation for the next ASIC, which will support more than 256 ports, local_port field should be extended to 10 bits. It is not possible to use 10 consecutive bits in all registers, and therefore, the field is split into 2 fields: 1. local_port - the existing 8 bits, represent LSB of the extended field. 2. lp_msb - extra 2 bits, represent MSB of the extended field. To avoid complex programming when reading/writing local_port, add a dedicated macro which creates get and set functions which handle both parts of local_port. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-01mlxsw: reg: Remove unused functionsAmit Cohen
The functions mlxsw_reg_sfd_uc_unpack() and mlxsw_reg_sfd_uc_lag_unpack() are not used. Remove them. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-01mlxsw: spectrum: Bump minimum FW version to xx.2010.1006Amit Cohen
Add latest verified version of Nvidia Spectrum-family switch firmware, for Spectrum (13.2010.1006), Spectrum-2 (29.2010.1006) and Spectrum-3 (30.2010.1006). Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-01Merge tag 'mlx5-fixes-2021-11-30' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2021-11-30 This series provides bug fixes to mlx5 driver. Please pull and let me know if there is any problem. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-01Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 40GbE Intel Wired LAN Driver Updates 2021-11-30 This series contains updates to iavf driver only. Patryk adds a debug message when MTU is changed. Grzegorz adds messaging when transitioning in and out of multicast promiscuous mode. Jake returns correct error codes for iavf_parse_cls_flower(). Jedrzej adds messaging for when the driver is removed and refactors struct usage to take less memory. He also adjusts ethtool statistics to only display information on active queues. Tony allows for user to specify the RSS hash. Karen resolves some static analysis warnings, corrects format specifiers, and rewords a message to come across as informational. v2: - Dropped patch 1 (for net) and 5 - Change MTU message from info to debug ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-01Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2021-11-30 This series contains updates to ice driver only. Shiraz corrects assignment of boolean variable and removes an unused enum. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-01Merge branch '1GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 1GbE Intel Wired LAN Driver Updates 2021-11-30 Jesper Dangaard Brouer says: Changes to fix and enable XDP metadata to a specific Intel driver igc. Tested with hardware i225 that uses driver igc, while testing AF_XDP access to metadata area. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-01net: dsa: mv88e6xxx: Link in pcs_get_state() if AN is bypassedMarek Behún
Function mv88e6xxx_serdes_pcs_get_state() currently does not report link up if AN is enabled, Link bit is set, but Speed and Duplex Resolved bit is not set, which testing shows is the case for when auto-negotiation was bypassed (we have AN enabled but link partner does not). An example of such link partner is Marvell 88X3310 PHY, when put into the mode where host interface changes between 10gbase-r, 5gbase-r, 2500base-x and sgmii according to copper speed. The 88X3310 does not enable AN in 2500base-x, and so SerDes on mv88e6xxx currently does not link with it. Fix this. Fixes: a5a6858b793f ("net: dsa: mv88e6xxx: extend phylink to Serdes PHYs") Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-01net: dsa: mv88e6xxx: Fix inband AN for 2500base-x on 88E6393X familyMarek Behún
Inband AN is broken on Amethyst in 2500base-x mode when set by standard mechanism (via cmode). (There probably is some weird setting done by default in the switch for this mode that make it cycle in some state or something, because when the peer is the mvneta controller, it receives link change interrupts every ~0.3ms, but the link is always down.) Get around this by configuring the PCS mode to 1000base-x (where inband AN works), and then changing the SerDes frequency while SerDes transmitter and receiver are disabled, before enabling SerDes PHY. After disabling SerDes PHY, change the PCS mode back to 2500base-x, to avoid confusing the device (if we leave it at 1000base-x PCS mode but with different frequency, and then change cmode to sgmii, the device won't change the frequency because it thinks it already has the correct one). The register which changes the frequency is undocumented. I discovered it by going through all registers in the ranges 4.f000-4.f100 and 1e.8000-1e.8200 for all SerDes cmodes (sgmii, 1000base-x, 2500base-x, 5gbase-r, 10gbase-r, usxgmii) and filtering out registers that didn't make sense (the value was the same for modes which have different frequency). The result of this was: reg sgmii 1000base-x 2500base-x 5gbase-r 10gbase-r usxgmii 04.f002 005b 0058 0059 005c 005d 005f 04.f076 3000 0000 1000 4000 5000 7000 04.f07c 0950 0950 1850 0550 0150 0150 1e.8000 0059 0059 0058 0055 0051 0051 1e.8140 0e20 0e20 0e28 0e21 0e42 0e42 Register 04.f002 is the documented Port Operational Confiuration register, it's last 3 bits select PCS type, so changing this register also changes the frequency to the appropriate value. Registers 04.f076 and 04.f07c are not writable. Undocumented register 1e.8000 was the one: changing bits 3:0 from 9 to 8 changed SerDes frequency to 3.125 GHz, while leaving the value of PCS mode in register 04.f002.2:0 at 1000base-x. Inband autonegotiation started working correctly. (I didn't try anything with register 1e.8140 since 1e.8000 solved the problem.) Since I don't have documentation for this register 1e.8000.3:0, I am using the constants without names, but my hypothesis is that this register selects PHY frequency. If in the future I have access to an oscilloscope able to handle these frequencies, I will try to test this hypothesis. Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family") Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-01net: dsa: mv88e6xxx: Add fix for erratum 5.2 of 88E6393X familyMarek Behún
Add fix for erratum 5.2 of the 88E6393X (Amethyst) family: for 10gbase-r mode, some undocumented registers need to be written some special values. Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family") Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-01net: dsa: mv88e6xxx: Save power by disabling SerDes trasmitter and receiverMarek Behún
Save power on 88E6393X by disabling SerDes receiver and transmitter after SerDes is SerDes is disabled. Signed-off-by: Marek Behún <kabel@kernel.org> Cc: stable@vger.kernel.org # de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family") Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-01net: dsa: mv88e6xxx: Drop unnecessary check in mv88e6393x_serdes_erratum_4_6()Marek Behún
The check for lane is unnecessary, since the function is called only with allowed lane argument. Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-01net: dsa: mv88e6xxx: Fix application of erratum 4.8 for 88E6393XMarek Behún
According to SERDES scripts for 88E6393X, erratum 4.8 has to be applied every time before SerDes is powered on. Split the code for erratum 4.8 into separate function and call it in mv88e6393x_serdes_power(). Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family") Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-30net/mlx5e: SHAMPO, Fix constant expression resultBen Ben-Ishay
mlx5e_build_shampo_hd_umr uses counters i and index incorrectly as unsigned, thus the err state err_unmap could stuck in endless loop. Change i to int to solve the first issue. Reduce index check to solve the second issue, the caller function validates that index could not rotate. Fixes: 64509b052525 ("net/mlx5e: Add data path for SHAMPO feature") Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-11-30net/mlx5: Fix access to a non-supported registerAya Levin
Validate MRTC register is supported before triggering a delayed work which accesses it. Fixes: 5a1023deeed0 ("net/mlx5: Add periodic update of host time to firmware") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-11-30net/mlx5: Fix too early queueing of log timestamp workGal Pressman
The log timestamp work should not be queued before the command interface is initialized, move it to a later stage in the init flow. Fixes: 5a1023deeed0 ("net/mlx5: Add periodic update of host time to firmware") Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-11-30net/mlx5: Fix use after free in mlx5_health_wait_pci_upAmir Tzin
The device health recovery flow calls mlx5_health_wait_pci_up() which queries the device for FW_RESET timeout after freeing the device timeouts structure on mlx5_function_teardown(). Fix this bug by moving timeouts structure init/cleanup to the device's init/uninit phases. Since it is necessary to reset default software timeouts on function reload, extract setting of defaults values from mlx5_tout_init() and call mlx5_tout_set_def_val() directly from mlx5_function_setup(). Fixes: 5945e1adeab5 ("net/mlx5: Read timeout values from init segment") Reported by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Amir Tzin <amirtz@nvidia.com> Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-11-30net/mlx5: E-Switch, Use indirect table only if all destinations support itMaor Dickman
When adding rule with multiple destinations, indirect table is used for all of the destinations if at least one of the destinations support it, this can cause creation of invalid indirect tables for the destinations that doesn't support it. Fixed it by using indirect table only if all destinations support it. Fixes: a508728a4c8b ("net/mlx5e: VF tunnel RX traffic offloading") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-11-30net/mlx5: E-Switch, Check group pointer before reading bw_share valueDmytro Linkin
If log_esw_max_sched_depth is not supported group pointer of the vport is NULL. Hence, check the pointer before reading bw_share value. Fixes: 0fe132eac38c ("net/mlx5: E-switch, Allow to add vports to rate groups") Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-11-30net/mlx5: E-Switch, fix single FDB creation on BlueFieldMark Bloch
Always use MLX5_FLOW_TABLE_OTHER_VPORT flag when creating egress ACL table for single FDB. Not doing so on BlueField will make firmware fail the command. On BlueField the E-Switch manager is the ECPF (vport 0xFFFE) which is filled in the flow table creation command but as the other_vport field wasn't set the firmware complains about a bad parameter. This is different from a regular HCA where the E-Switch manager vport is the PF (vport 0x0). Passing MLX5_FLOW_TABLE_OTHER_VPORT will make the firmware happy both on BlueField and on regular HCAs without special condition for each. This fixes the bellow firmware syndrome: mlx5_cmd_check:819:(pid 571): CREATE_FLOW_TABLE(0x930) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x754a4) Fixes: db202995f503 ("net/mlx5: E-Switch, add logic to enable shared FDB") Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-11-30net/mlx5: E-switch, Respect BW share of the new groupDmytro Linkin
To enable transmit schduler on vport FW require non-zero configuration for vport's TSAR. If vport added to the group which has configured BW share value and TX rate values of the vport are zero, then scheduler wouldn't be enabled on this vport. Fix that by calling BW normalization if BW share of the new group is configured. Fixes: 0fe132eac38c ("net/mlx5: E-switch, Allow to add vports to rate groups") Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-11-30net/mlx5: Lag, Fix recreation of VF LAGMaor Gottlieb
Driver needs to nullify the port select attributes of the LAG when port selection is destroyed, otherwise it breaks recreation of the LAG. It fixes the below kernel oops: [ 587.906377] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 587.908843] #PF: supervisor read access in kernel mode [ 587.910730] #PF: error_code(0x0000) - not-present page [ 587.912580] PGD 0 P4D 0 [ 587.913632] Oops: 0000 [#1] SMP PTI [ 587.914644] CPU: 5 PID: 165 Comm: kworker/u20:5 Tainted: G OE 5.9.0_mlnx #1 [ 587.916152] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 587.918332] Workqueue: mlx5_lag mlx5_do_bond_work [mlx5_core] [ 587.919479] RIP: 0010:mlx5_del_flow_rules+0x10/0x270 [mlx5_core] [ 587.920568] mlx5_core 0000:08:00.1 enp8s0f1: Link up [ 587.920680] Code: c0 09 80 a0 e8 cf 42 a4 e0 48 c7 c3 f4 ff ff ff e8 8a 88 dd e0 e9 ab fe ff ff 0f 1f 44 00 00 41 56 41 55 49 89 fd 41 54 55 53 <48> 8b 47 08 48 8b 68 28 48 85 ed 74 2e 48 8d 7d 38 e8 6a 64 34 e1 [ 587.925116] bond0: (slave enp8s0f1): Enslaving as an active interface with an up link [ 587.930415] RSP: 0018:ffffc9000048fd88 EFLAGS: 00010282 [ 587.930417] RAX: ffff88846c14fac0 RBX: ffff88846cddcb80 RCX: 0000000080400007 [ 587.930417] RDX: 0000000080400008 RSI: ffff88846cddcb80 RDI: 0000000000000000 [ 587.930419] RBP: ffff88845fd80140 R08: 0000000000000001 R09: ffffffffa074ba00 [ 587.938132] R10: ffff88846c14fec0 R11: 0000000000000001 R12: ffff88846c122f10 [ 587.939473] R13: 0000000000000000 R14: 0000000000000001 R15: ffff88846d7a0000 [ 587.940800] FS: 0000000000000000(0000) GS:ffff88846fa80000(0000) knlGS:0000000000000000 [ 587.942416] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 587.943536] CR2: 0000000000000008 CR3: 000000000240a002 CR4: 0000000000770ee0 [ 587.944904] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 587.946308] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 587.947639] PKRU: 55555554 [ 587.948236] Call Trace: [ 587.948834] mlx5_lag_destroy_definer.isra.3+0x16/0x90 [mlx5_core] [ 587.950033] mlx5_lag_destroy_definers+0x5b/0x80 [mlx5_core] [ 587.951128] mlx5_deactivate_lag+0x6e/0x80 [mlx5_core] [ 587.952146] mlx5_do_bond+0x150/0x450 [mlx5_core] [ 587.953086] mlx5_do_bond_work+0x3e/0x50 [mlx5_core] [ 587.954086] process_one_work+0x1eb/0x3e0 [ 587.954899] worker_thread+0x2d/0x3c0 [ 587.955656] ? process_one_work+0x3e0/0x3e0 [ 587.956493] kthread+0x115/0x130 [ 587.957174] ? kthread_park+0x90/0x90 [ 587.957929] ret_from_fork+0x1f/0x30 [ 587.973055] ---[ end trace 71ccd6eca89f5513 ]--- Fixes: b7267869e923 ("net/mlx5: Lag, add support to create/destroy/modify port selection") Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-11-30net/mlx5: Move MODIFY_RQT command to ignore list in internal error stateMoshe Shemesh
When the device is in internal error state, command interface isn't accessible and the driver decides which commands to fail and which to ignore. Move the MODIFY_RQT command to the ignore list in order to avoid the following redundant warning messages in internal error state: mlx5_core 0000:82:00.1: mlx5e_rss_disable:419:(pid 23754): Failed to redirect RQT 0x0 to drop RQ 0xc00848: err = -5 mlx5_core 0000:82:00.1: mlx5e_rx_res_channels_deactivate:598:(pid 23754): Failed to redirect direct RQT 0x1 to drop RQ 0xc00848 (channel 0): err = -5 mlx5_core 0000:82:00.1: mlx5e_rx_res_channels_deactivate:607:(pid 23754): Failed to redirect XSK RQT 0x19 to drop RQ 0xc00848 (channel 0): err = -5 Fixes: 43ec0f41fa73 ("net/mlx5e: Hide all implementation details of mlx5e_rx_res") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-11-30net/mlx5e: Sync TIR params updates against concurrent create/modifyTariq Toukan
Transport Interface Receive (TIR) objects perform the packet processing and reassembly and is also responsible for demultiplexing the packets into the different RQs. There are certain TIR context attributes that propagate to the pointed RQs and applied to them (like packet_merge offloads (LRO/SHAMPO) and tunneled_offload_en). When TIRs do not agree on attributes values, a "last one wins" policy is applied. Hence, if not synced properly, a race between TIR params update and a concurrent TIR create/modify operation might yield to a mismatch between the shadow parameters in SW and the actual applied state of the RQs in HW. tunneled_offload_en is a fixed attribute per profile, while packet merge offload state might be toggled and get out-of-sync. When this happens, packet_merge offload might be working although not requested, or the opposite. All updates to packet_merge state and all create/modify operations of regular redirection/steering TIRs are done under the same priv->state_lock, so they do not run in parallel, and no race is possible. However, there are other kind of TIRs (acceleration offloads TIRs, like TLS TIRs) which are created on demand for each new connection without holding the coarse priv->state_lock, hence might race. Fix this by synchronizing all packet_merge state reads and writes against all TIR create/modify operations. Include the modify operations of the regular redirection steering TIRs under the new lock, for better code layering and division of responsibilities. Fixes: 1182f3659357 ("net/mlx5e: kTLS, Add kTLS RX HW offload support") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-11-30net/mlx5e: Fix missing IPsec statistics on uplink representorRaed Salem
The cited patch added the IPsec support to uplink representor, however as uplink representors have his private statistics where IPsec stats is not part of it, that effectively makes IPsec stats hidden when uplink representor stats queried. Resolve by adding IPsec stats to uplink representor private statistics. Fixes: 5589b8f1a2c7 ("net/mlx5e: Add IPsec support to uplink representor") Signed-off-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Alaa Hleihel <alaa@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-11-30net/mlx5e: IPsec: Fix Software parser inner l3 type setting in case of ↵Raed Salem
encapsulation Current code wrongly uses the skb->protocol field which reflects the outer l3 protocol to set the inner l3 type in Software Parser (SWP) fields settings in the ethernet segment (eseg) in flows where inner l3 exists like in Vxlan over ESP flow, the above method wrongly use the outer protocol type instead of the inner one. thus breaking cases where inner and outer headers have different protocols. Fix by setting the inner l3 type in SWP according to the inner l3 ip header version. Fixes: 2ac9cfe78223 ("net/mlx5e: IPSec, Add Innova IPSec offload TX data path") Signed-off-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-11-30net: natsemi: fix hw address initialization for jazz and xtensaMax Filippov
Use eth_hw_addr_set function instead of writing the address directly to net_device::dev_addr. Fixes: adeef3e32146 ("net: constify netdev->dev_addr") Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Link: https://lore.kernel.org/r/20211130143600.31970-1-jcmvbkbc@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-30natsemi: xtensa: fix section mismatch warningsRandy Dunlap
Fix section mismatch warnings in xtsonic. The first one appears to be bogus and after fixing the second one, the first one is gone. WARNING: modpost: vmlinux.o(.text+0x529adc): Section mismatch in reference from the function sonic_get_stats() to the function .init.text:set_reset_devices() The function sonic_get_stats() references the function __init set_reset_devices(). This is often because sonic_get_stats lacks a __init annotation or the annotation of set_reset_devices is wrong. WARNING: modpost: vmlinux.o(.text+0x529b3b): Section mismatch in reference from the function xtsonic_probe() to the function .init.text:sonic_probe1() The function xtsonic_probe() references the function __init sonic_probe1(). This is often because xtsonic_probe lacks a __init annotation or the annotation of sonic_probe1 is wrong. Fixes: 74f2a5f0ef64 ("xtensa: Add support for the Sonic Ethernet device for the XT2000 board.") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Chris Zankel <chris@zankel.net> Cc: linux-xtensa@linux-xtensa.org Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Link: https://lore.kernel.org/r/20211130063947.7529-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2026-09-11 06:28:16 +0000