| Age | Commit message (Collapse) | Author |
|---|
|
Fix following coccicheck warning:
WARNING: Function "for_each_child_of_node"
should have of_node_put() before return.
Early exits from for_each_child_of_node should decrement the
node reference counter.
Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently "bond_should_notify_peers: slave ..." messages are printed whenever
"bond_should_notify_peers" function is called.
+++
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): Received LACPDU on port 1
Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): Rx Machine: Port=1, Last State=6, Curr State=6
Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): partner sync=1
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
...
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): Received LACPDU on port 2
Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): Rx Machine: Port=2, Last State=6, Curr State=6
Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): partner sync=1
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
+++
This is confusing and can also clutter up debug logs.
Print logs only when the peer notification happens.
Signed-off-by: Suresh Kumar <suresh2514@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dma_addr was declared using DEFINE_DMA_UNMAP_ADDR() which requires to
use dma_unmap_addr() to access it.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 753a026cfec1 ("net: ocelot: add FDMA support")
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 64d47d50be7a ("net: dsa: mv88e6xxx: configure interface settings
in mac_config") removed forcing of speed and duplex from
mv88e6xxx_mac_config(), where the link is forced down, and left it only
in mv88e6xxx_mac_link_up(), by which time link is unforced.
It seems that (at least on 88E6190) when changing cmode to 2500base-x,
if the link is not forced down, but the speed or duplex are still
forced, the forcing of new settings for speed & duplex doesn't take in
mv88e6xxx_mac_link_up().
Fix this by unforcing speed & duplex in mv88e6xxx_mac_link_down().
Fixes: 64d47d50be7a ("net: dsa: mv88e6xxx: configure interface settings in mac_config")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When inserting a SFP that runs at 2.5G, then the Serdes was still
configured to run at 1G. Because the config->speed was 0, and then the
speed of the serdes was not configured at all, it was using the default
value which is 1G. This patch stop calling the serdes function set_speed
and allow the serdes to figure out the speed based on the interface
type.
Fixes: d28d6d2e37d10d ("net: lan966x: add port module support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The phy_attach() function does not return NULL. It returns error pointers.
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This implements an SPI protocol driver for Vertexcom MSE102x
Homeplug GreenPHY chip.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
mvneta provides mac_an_restart and mac_pcs_get_state methods, so needs
to be marked as a legacy driver. Marek spotted that mvneta had stopped
working in 2500base-X mode - thanks for reporting.
Reported-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
axienet has a PCS, but does not make use of the phylink PCS support.
Mark it was a pre-March 2020 driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update the definition of the IPA interconnects for IPA v4.5 so
the path between IPA and system memory is represented by a single
"memory" interconnect.
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This structure is used only in bareudp.c.
While there, adjust include files: we need netdevice.h, not skbuff.h.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There's no user for this function.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In DMA threshold mode, frame underflow errors may sometimes occur when
the TC(threshold control) value is not enough. The TC value need to be
bumped up in this case.
There is no underflow interrupt bit on DMA_CH(#i)_Status of dwmac4, so
the DMA threshold cannot be bumped up in stmmac_dma_interrupt(). The
i.mx8mp board observed an underflow error while running NFS boot, the
NFS rootfs could not be mounted.
The underflow error can be got from the DMA descriptor TDES3 on dwmac4.
This patch bump up tc value once underflow error is got from TDES3.
Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
frag_timer will be created & initialized for stations when
they associate and will be deleted during every key installation
while flushing old fragments.
For AP interface self peer will be created and Group keys
will be installed for this peer, but there will be no real
Station entry & hence frag_timer won't be created and
initialized, deleting such uninitialized kernel timers causes below
warnings and backtraces printed with CONFIG_DEBUG_OBJECTS_TIMERS
enabled.
[ 177.828008] ODEBUG: assert_init not available (active state 0) object type: timer_list hint: 0x0
[ 177.836833] WARNING: CPU: 3 PID: 188 at lib/debugobjects.c:508 debug_print_object+0xb0/0xf0
[ 177.845185] Modules linked in: ath11k_pci ath11k qmi_helpers qrtr_mhi qrtr ns mhi
[ 177.852679] CPU: 3 PID: 188 Comm: hostapd Not tainted 5.14.0-rc3-32919-g4034139e1838-dirty #14
[ 177.865805] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
[ 177.871804] pc : debug_print_object+0xb0/0xf0
[ 177.876155] lr : debug_print_object+0xb0/0xf0
[ 177.880505] sp : ffffffc01169b5a0
[ 177.883810] x29: ffffffc01169b5a0 x28: ffffff80081c2320 x27: ffffff80081c4078
[ 177.890942] x26: ffffff8003fe8f28 x25: ffffff8003de9890 x24: ffffffc01134d738
[ 177.898075] x23: ffffffc010948f20 x22: ffffffc010b2d2e0 x21: ffffffc01169b628
[ 177.905206] x20: ffffffc01134d700 x19: ffffffc010c80d98 x18: 00000000000003f6
[ 177.912339] x17: 203a657079742074 x16: 63656a626f202930 x15: 0000000000000152
[ 177.919471] x14: 0000000000000152 x13: 00000000ffffffea x12: ffffffc010d732e0
[ 177.926603] x11: 0000000000000003 x10: ffffffc010d432a0 x9 : ffffffc010d432f8
[ 177.933735] x8 : 000000000002ffe8 x7 : c0000000ffffdfff x6 : 0000000000000001
[ 177.940866] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000ffffffff
[ 177.947997] x2 : ffffffc010c93240 x1 : ffffff80023624c0 x0 : 0000000000000054
[ 177.955130] Call trace:
[ 177.957567] debug_print_object+0xb0/0xf0
[ 177.961570] debug_object_assert_init+0x124/0x178
[ 177.966269] try_to_del_timer_sync+0x1c/0x70
[ 177.970536] del_timer_sync+0x30/0x50
[ 177.974192] ath11k_peer_frags_flush+0x34/0x68 [ath11k]
[ 177.979439] ath11k_mac_op_set_key+0x1e4/0x338 [ath11k]
[ 177.984673] ieee80211_key_enable_hw_accel+0xc8/0x3d0
[ 177.989722] ieee80211_key_replace+0x360/0x740
[ 177.994160] ieee80211_key_link+0x16c/0x210
[ 177.998337] ieee80211_add_key+0x138/0x338
[ 178.002426] nl80211_new_key+0xfc/0x258
[ 178.006257] genl_family_rcv_msg_doit.isra.17+0xd8/0x120
[ 178.011565] genl_rcv_msg+0xd8/0x1c8
[ 178.015134] netlink_rcv_skb+0x38/0xf8
[ 178.018877] genl_rcv+0x34/0x48
[ 178.022012] netlink_unicast+0x174/0x230
[ 178.025928] netlink_sendmsg+0x188/0x388
[ 178.029845] ____sys_sendmsg+0x218/0x250
[ 178.033763] ___sys_sendmsg+0x68/0x90
[ 178.037418] __sys_sendmsg+0x44/0x88
[ 178.040988] __arm64_sys_sendmsg+0x20/0x28
[ 178.045077] invoke_syscall.constprop.5+0x54/0xe0
[ 178.049776] do_el0_svc+0x74/0xc0
[ 178.053084] el0_svc+0x10/0x18
[ 178.056133] el0t_64_sync_handler+0x88/0xb0
[ 178.060310] el0t_64_sync+0x148/0x14c
[ 178.063966] ---[ end trace 8a5cf0bf9d34a058 ]---
Add changes to not to delete frag timer for peers during
group key installation.
Tested on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01092-QCAHKSWPL_SILICONZ-1
Fixes: c3944a562102 ("ath11k: Clear the fragment cache during key install")
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1639071421-25078-1-git-send-email-quic_ramess@quicinc.com
|
|
With CONFIG_LOCKDEP=y and CONFIG_DEBUG_SPINLOCK=y, lockdep reports
below warning:
[ 166.059415] ============================================
[ 166.059416] WARNING: possible recursive locking detected
[ 166.059418] 5.15.0-wt-ath+ #10 Tainted: G W O
[ 166.059420] --------------------------------------------
[ 166.059421] kworker/0:2/116 is trying to acquire lock:
[ 166.059423] ffff9905f2083160 (&srng->lock){+.-.}-{2:2}, at: ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k]
[ 166.059440]
but task is already holding lock:
[ 166.059442] ffff9905f2083230 (&srng->lock){+.-.}-{2:2}, at: ath11k_dp_process_reo_status+0x95/0x2d0 [ath11k]
[ 166.059491]
other info that might help us debug this:
[ 166.059492] Possible unsafe locking scenario:
[ 166.059493] CPU0
[ 166.059494] ----
[ 166.059495] lock(&srng->lock);
[ 166.059498] lock(&srng->lock);
[ 166.059500]
*** DEADLOCK ***
[ 166.059501] May be due to missing lock nesting notation
[ 166.059502] 3 locks held by kworker/0:2/116:
[ 166.059504] #0: ffff9905c0081548 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x1f6/0x660
[ 166.059511] #1: ffff9d2400a5fe68 ((debug_obj_work).work){+.+.}-{0:0}, at: process_one_work+0x1f6/0x660
[ 166.059517] #2: ffff9905f2083230 (&srng->lock){+.-.}-{2:2}, at: ath11k_dp_process_reo_status+0x95/0x2d0 [ath11k]
[ 166.059532]
stack backtrace:
[ 166.059534] CPU: 0 PID: 116 Comm: kworker/0:2 Kdump: loaded Tainted: G W O 5.15.0-wt-ath+ #10
[ 166.059537] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0059.2019.1112.1124 11/12/2019
[ 166.059539] Workqueue: events free_obj_work
[ 166.059543] Call Trace:
[ 166.059545] <IRQ>
[ 166.059547] dump_stack_lvl+0x56/0x7b
[ 166.059552] __lock_acquire+0xb9a/0x1a50
[ 166.059556] lock_acquire+0x1e2/0x330
[ 166.059560] ? ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k]
[ 166.059571] _raw_spin_lock_bh+0x33/0x70
[ 166.059574] ? ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k]
[ 166.059584] ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k]
[ 166.059594] ath11k_dp_tx_send_reo_cmd+0x3f/0x130 [ath11k]
[ 166.059605] ath11k_dp_rx_tid_del_func+0x221/0x370 [ath11k]
[ 166.059618] ath11k_dp_process_reo_status+0x22f/0x2d0 [ath11k]
[ 166.059632] ? ath11k_dp_service_srng+0x2ea/0x2f0 [ath11k]
[ 166.059643] ath11k_dp_service_srng+0x2ea/0x2f0 [ath11k]
[ 166.059655] ath11k_pci_ext_grp_napi_poll+0x1c/0x70 [ath11k_pci]
[ 166.059659] __napi_poll+0x28/0x230
[ 166.059664] net_rx_action+0x285/0x310
[ 166.059668] __do_softirq+0xe6/0x4d2
[ 166.059672] irq_exit_rcu+0xd2/0xf0
[ 166.059675] common_interrupt+0xa5/0xc0
[ 166.059678] </IRQ>
[ 166.059679] <TASK>
[ 166.059680] asm_common_interrupt+0x1e/0x40
[ 166.059683] RIP: 0010:_raw_spin_unlock_irqrestore+0x38/0x70
[ 166.059686] Code: 83 c7 18 e8 2a 95 43 ff 48 89 ef e8 22 d2 43 ff 81 e3 00 02 00 00 75 25 9c 58 f6 c4 02 75 2d 48 85 db 74 01 fb bf 01 00 00 00 <e8> 63 2e 40 ff 65 8b 05 8c 59 97 5c 85 c0 74 0a 5b 5d c3 e8 00 6a
[ 166.059689] RSP: 0018:ffff9d2400a5fca0 EFLAGS: 00000206
[ 166.059692] RAX: 0000000000000002 RBX: 0000000000000200 RCX: 0000000000000006
[ 166.059694] RDX: 0000000000000000 RSI: ffffffffa404879b RDI: 0000000000000001
[ 166.059696] RBP: ffff9905c0053000 R08: 0000000000000001 R09: 0000000000000001
[ 166.059698] R10: ffff9d2400a5fc50 R11: 0000000000000001 R12: ffffe186c41e2840
[ 166.059700] R13: 0000000000000001 R14: ffff9905c78a1c68 R15: 0000000000000001
[ 166.059704] free_debug_processing+0x257/0x3d0
[ 166.059708] ? free_obj_work+0x1f5/0x250
[ 166.059712] __slab_free+0x374/0x5a0
[ 166.059718] ? kmem_cache_free+0x2e1/0x370
[ 166.059721] ? free_obj_work+0x1f5/0x250
[ 166.059724] kmem_cache_free+0x2e1/0x370
[ 166.059727] free_obj_work+0x1f5/0x250
[ 166.059731] process_one_work+0x28b/0x660
[ 166.059735] ? process_one_work+0x660/0x660
[ 166.059738] worker_thread+0x37/0x390
[ 166.059741] ? process_one_work+0x660/0x660
[ 166.059743] kthread+0x176/0x1a0
[ 166.059746] ? set_kthread_struct+0x40/0x40
[ 166.059749] ret_from_fork+0x22/0x30
[ 166.059754] </TASK>
Since these two lockes are both initialized in ath11k_hal_srng_setup,
they are assigned with the same key. As a result lockdep suspects that
the task is trying to acquire the same lock (due to same key) while
already holding it, and thus reports the DEADLOCK warning. However as
they are different spinlock instances, the warning is false positive.
On the other hand, even no dead lock indeed, this is a major issue for
upstream regression testing as it disables lockdep functionality.
Fix it by assigning separate lock class key for each srng->lock.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20211209011949.151472-1-quic_bqiang@quicinc.com
|
|
Set DTIM policy to DTIM stick mode, so station follows AP DTIM
interval rather than listen interval which is set in peer assoc cmd.
DTIM stick mode is more preferred per firmware team request.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1638948694-15582-1-git-send-email-quic_cjhuang@quicinc.com
|
|
The driver reports NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR capability
to upper layer based on the service bit firmware reported. Driver
sets the spoofed flag in scan_ctrl_flag to firmware if upper layer
has enabled this feature in scan request.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1638948007-9609-1-git-send-email-quic_cjhuang@quicinc.com
|
|
I updated to sparse v0.6.4 and it warns:
drivers/net/wireless/ath/ath10k/wmi.c: note: in included file (through drivers/net/wireless/ath/ath10k/core.h):
drivers/net/wireless/ath/ath10k/wmi.h:3481:34: warning: array of flexible structures
Fix it by changing the type to u8 array, in struct wmi_phyerr_hdr_arg it's
stored as a void pointer anyway.
Compile tested only.
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20211209091545.6098-2-kvalo@kernel.org
|
|
I updated to sparse v0.6.4 and it warns:
drivers/net/wireless/ath/ath10k/hw.c: note: in included file (through drivers/net/wireless/ath/ath10k/core.h):
drivers/net/wireless/ath/ath10k/htt.h:1503:41: warning: array of flexible structures
drivers/net/wireless/ath/ath10k/htt_rx.c: note: in included file (through drivers/net/wireless/ath/ath10k/core.h):
drivers/net/wireless/ath/ath10k/htt.h:1503:41: warning: array of flexible structures
The structure is unused in ath10k so let's just remove it.
Compile tested only.
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20211209091545.6098-1-kvalo@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a bunch of small char/misc and other driver subsystem fixes.
Included in here are:
- iio driver fixes for reported problems
- phy driver fixes for a number of reported problems
- mhi resume bugfix for broken hardware
- nvmem driver fix
- rtsx driver fix for irq issues
- fastrpc packet parsing fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (33 commits)
bus: mhi: core: Add support for forced PM resume
iio: trigger: stm32-timer: fix MODULE_ALIAS
misc: rtsx: Avoid mangling IRQ during runtime PM
nvmem: eeprom: at25: fix FRAM byte_len
misc: fastrpc: fix improper packet size calculation
MAINTAINERS: add maintainer for Qualcomm FastRPC driver
bus: mhi: pci_generic: Fix device recovery failed issue
iio: adc: stm32: fix null pointer on defer_probe error
phy: HiSilicon: Fix copy and paste bug in error handling
dt-bindings: phy: zynqmp-psgtr: fix USB phy name
phy: ti: omap-usb2: Fix the kernel-doc style
phy: qualcomm: ipq806x-usb: Fix kernel-doc style
iio: at91-sama5d2: Fix incorrect sign extension
iio: adc: axp20x_adc: fix charging current reporting on AXP22x
iio: gyro: adxrs290: fix data signedness
phy: ti: tusb1210: Fix the kernel-doc warn
phy: qualcomm: usb-hsic: Fix the kernel-doc warn
phy: qualcomm: qmp: Add missing struct documentation
phy: mvebu-cp110-utmi: Fix kernel-doc warns
iio: ad7768-1: Call iio_trigger_notify_done() on error
...
|
|
When multiple threads concurrently access the debugfs content, data
and pointer exceptions may occur. Therefore, mutex lock protection is
added for debugfs.
Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, the hns3_remove function firstly uninstall client instance,
and then uninstall acceletion engine device. The netdevice is freed in
client instance uninstall process, but acceletion engine device uninstall
process still use it to trace runtime information. This causes a use after
free problem.
So fixes it by check the instance register state to avoid use after free.
Fixes: d8355240cf8f ("net: hns3: add trace event support for PF/VF mailbox")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sections
The sja1105 driver messes with the tagging protocol's state when PTP RX
timestamping is enabled/disabled. This is fundamentally necessary
because the tagger needs to know what to do when it receives a PTP
packet. If RX timestamping is enabled, then a metadata follow-up frame
is expected, and this holds the (partial) timestamp. So the tagger plays
hide-and-seek with the network stack until it also gets the metadata
frame, and then presents a single packet, the timestamped PTP packet.
But when RX timestamping isn't enabled, there is no metadata frame
expected, so the hide-and-seek game must be turned off and the packet
must be delivered right away to the network stack.
Considering this, we create a pseudo isolation by devising two tagger
methods callable by the switch: one to get the RX timestamping state,
and one to set it. Since we can't export symbols between the tagger and
the switch driver, these methods are exposed through function pointers.
After this change, the public portion of the sja1105_tagger_data
contains only function pointers.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
protocol driver"
This reverts commit 6d709cadfde68dbd12bef12fcced6222226dcb06.
The above change was done to avoid calling symbols exported by the
switch driver from the tagging protocol driver.
With the tagger-owned storage model, we have a new option on our hands,
and that is for the switch driver to provide a data consumer handler in
the form of a function pointer inside the ->connect_tag_protocol()
method. Having a function pointer avoids the problems of the exported
symbols approach.
By creating a handler for metadata frames holding TX timestamps on
SJA1110, we are able to eliminate an skb queue from the tagger data, and
replace it with a simple, and stateless, function pointer. This skb
queue is now handled exclusively by sja1105_ptp.c, which makes the code
easier to follow, as it used to be before the reverted patch.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, struct sja1105_tagger_data is a part of struct
sja1105_private, and is used by the sja1105 driver to populate dp->priv.
With the movement towards tagger-owned storage, the sja1105 driver
should not be the owner of this memory.
This change implements the connection between the sja1105 switch driver
and its tagging protocol, which means that sja1105_tagger_data no longer
stays in dp->priv but in ds->tagger_data, and that the sja1105 driver
now only populates the sja1105_port_deferred_xmit callback pointer.
The kthread worker is now the responsibility of the tagger.
The sja1105 driver also alters the tagger's state some more, especially
with regard to the PTP RX timestamping state. This will be fixed up a
bit in further changes.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The TX timestamp ID is incremented by the SJA1110 PTP timestamping
callback (->port_tx_timestamp) for every packet, when cloning it.
It isn't used by the tagger at all, even though it sits inside the
struct sja1105_tagger_data.
Also, serialization to this structure is currently done through
tagger_data->meta_lock, which is a cheap hack because the meta_lock
isn't used for anything else on SJA1110 (sja1105_rcv_meta_state_machine
isn't called).
This change moves ts_id from sja1105_tagger_data to sja1105_private and
introduces a dedicated spinlock for it, also in sja1105_private.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The design of the sja1105 tagger dp->priv is that each port has a
separate struct sja1105_port, and the sp->data pointer points to a
common struct sja1105_tagger_data.
We have removed all per-port members accessible by the tagger, and now
only struct sja1105_tagger_data remains. Make dp->priv point directly to
this.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This tagger property is in fact not used at all by the tagger, only by
the switch driver. Therefore it makes sense to be moved to
sja1105_private.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the ocelot-8021q driver was converted to deferred xmit as part of
commit 8d5f7954b7c8 ("net: dsa: felix: break at first CPU port during
init and teardown"), the deferred implementation was deliberately made
subtly different from what sja1105 has.
The implementation differences lied on the following observations:
- There might be a race between these two lines in tag_sja1105.c:
skb_queue_tail(&sp->xmit_queue, skb_get(skb));
kthread_queue_work(sp->xmit_worker, &sp->xmit_work);
and the skb dequeue logic in sja1105_port_deferred_xmit(). For
example, the xmit_work might be already queued, however the work item
has just finished walking through the skb queue. Because we don't
check the return code from kthread_queue_work, we don't do anything if
the work item is already queued.
However, nobody will take that skb and send it, at least until the
next timestampable skb is sent. This creates additional (and
avoidable) TX timestamping latency.
To close that race, what the ocelot-8021q driver does is it doesn't
keep a single work item per port, and a skb timestamping queue, but
rather dynamically allocates a work item per packet.
- It is also unnecessary to have more than one kthread that does the
work. So delete the per-port kthread allocations and replace them with
a single kthread which is global to the switch.
This change brings the two implementations in line by applying those
observations to the sja1105 driver as well.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This code is not necessary and complicates the conversion of this driver
to tagger-owned memory. If there is a PTP packet that is sent
concurrently with the port getting disabled, the deferred xmit mechanism
is robust enough to time out when it sees that it hasn't been delivered,
and recovers.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The felix driver makes very light use of dp->priv, and the tagger is
effectively stateless. dp->priv is practically only needed to set up a
callback to perform deferred xmit of PTP and STP packets using the
ocelot-8021q tagging protocol (the main ocelot tagging protocol makes no
use of dp->priv, although this driver sets up dp->priv irrespective of
actual tagging protocol in use).
struct felix_port (what used to be pointed to by dp->priv) is removed
and replaced with a two-sided structure. The public side of this
structure, visible to the switch driver, is ocelot_8021q_tagger_data.
The private side is ocelot_8021q_tagger_private, and the latter
structure physically encapsulates the former. The public half of the
tagger data structure can be accessed through a helper of the same name
(ocelot_8021q_tagger_data) which also sanity-checks the protocol
currently in use by the switch. The public/private split was requested
by Andrew Lunn.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In a typical mv88e6xxx switch tree like this:
CPU
| .----.
.--0--. | .--0--.
| sw0 | | | sw1 |
'-1-2-' | '-1-2-'
'---'
If sw1p{1,2} are added to a bridge that sw0p1 is not a part of, sw0
still needs to add a crosschip PVT entry for the virtual DSA device
assigned to represent the bridge.
Fixes: ce5df6894a57 ("net: dsa: mv88e6xxx: map virtual bridges with forwarding offload in the PVT")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Ethtool ring feature has _max_pending attributes read-only.
Set only read-write attributes in nsim_set_ringparam.
This patch is useful, if netdevsim device is set-up using NetworkManager,
because NetworkManager sends 0 as MAX values, as it is pointless to
retrieve them in extra call, because they should be read-only. Then,
the device is left in incosistent state (value > MAX).
Fixes: a7fc6db099b5 ("netdevsim: support ethtool ring and coalesce settings")
Signed-off-by: Filip Pokryvka <fpokryvk@redhat.com>
Link: https://lore.kernel.org/r/20211210175032.411872-1-fpokryvk@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the following Telit FN990 composition:
0x1070: tty, adb, rmnet, tty, tty, tty, tty
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20211210095722.22269-1-dnlplm@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ethernet frames can be extracted or injected autonomously to or from
the device’s DDR3/DDR3L memory and/or PCIe memory space. Linked list
data structures in memory are used for injecting or extracting Ethernet
frames. The FDMA generates interrupts when frame extraction or
injection is done and when the linked lists need updating.
The FDMA is shared between all the ethernet ports of the switch and
uses a linked list of descriptors (DCB) to inject and extract packets.
Before adding descriptors, the FDMA channels must be stopped. It would
be inefficient to do that each time a descriptor would be added so the
channels are restarted only once they stopped.
Both channels uses ring-like structure to feed the DCBs to the FDMA.
head and tail are never touched by hardware and are completely handled
by the driver. On top of that, page recycling has been added and is
mostly taken from gianfar driver.
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Co-developed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This commit adds support for changing MTU for the ocelot register based
interface. For ocelot, JUMBO frame size can be set up to 25000 bytes
but has been set to 9000 which is a saner value and allows for maximum
gain of performance with FDMA.
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In order to support PTP in FDMA, PTP handling code is needed. Since
this is the same as for register-based extraction, export it with
a new ocelot_ptp_rx_timestamp() function.
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
FDMA will need this code to prepare the injection frame header when
sending SKBs. Move this code into ocelot_ifh_port_set() and add
conditional IFH setting for vlan and rew op if they are not set.
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix checkpatch warning in iosm_ipc_mmio.c
- Alignment should match open parenthesis
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ipc_wwan_tx_flowctrl() is declared in iosm_ipc_wwan.h but is
not defined.
Removed the dead code.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If there is no active IP session (interface up & running) then
release the data channel.
Use nr_sessions variable to track current active IP sessions.
If the count drops to 0, then send pipe close ctrl message to
release the data channel.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Set wwan net dev tx queue len to DEFAULT_TX_QUEUE_LEN.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The BR-series installation guide from https://driverdownloads.qlogic.com/
mentions the cards support 10Gbase-SR/LR as well as direct attach cables.
The cards only have SFP+ ports, so 10000baseT is not the right mode.
Switch to using more specific link modes added in commit 5711a98221443
("net: ethtool: add support for 1000BaseX and missing 10G link modes").
Only compile tested.
Signed-off-by: Erik Ekman <erik@kryo.se>
Link: https://lore.kernel.org/r/20211208230022.153496-1-erik@kryo.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver uses irq_set_affinity_hint() to update the affinity_hint mask
that is consumed by the userspace to distribute the interrupts. However,
under the hood irq_set_affinity_hint() also applies the provided cpumask
(if not NULL) as the affinity for the given interrupt which is an
undocumented side effect.
To remove this side effect irq_set_affinity_hint() has been marked
as deprecated and new interfaces have been introduced. Hence, replace the
irq_set_affinity_hint() with the new interface irq_update_affinity_hint()
that only updates the affinity_hint pointer.
Signed-off-by: Nitesh Narayan Lal <nitesh@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20210903152430.244937-15-nitesh@redhat.com
|
|
The driver uses irq_set_affinity_hint() to update the affinity_hint mask
that is consumed by the userspace to distribute the interrupts and to apply
the provided mask as the affinity for the mlx5 interrupts. However,
irq_set_affinity_hint() applying the provided cpumask as an affinity for
the interrupt is an undocumented side effect.
To remove this side effect irq_set_affinity_hint() has been marked
as deprecated and new interfaces have been introduced. Hence, replace the
irq_set_affinity_hint() with the new interface irq_set_affinity_and_hint()
where the provided mask needs to be applied as the affinity and
affinity_hint pointer needs to be set and replace with
irq_update_affinity_hint() where only affinity_hint needs to be updated.
Signed-off-by: Nitesh Narayan Lal <nitesh@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20210903152430.244937-14-nitesh@redhat.com
|
|
The driver uses irq_set_affinity_hint() to:
- Set the affinity_hint which is consumed by the userspace for
distributing the interrupts
- Enforce affinity
As per commit 352f58b0d9f2 ("net-next/hinic: Set Rxq irq to specific cpu
for NUMA"), the hinic driver enforces its own affinity to bind IRQs to the
local NUMA node. However, irq_set_affinity_hint() applying the provided
cpumask as an affinity for the interrupt is an undocumented side effect.
To remove this side effect irq_set_affinity_hint() has been marked as
deprecated and new interfaces have been introduced. Hence, replace the
irq_set_affinity_hint() with the new interface irq_set_affinity_and_hint()
where the provided mask needs to be applied as the affinity and
affinity_hint pointer needs to be set and replace with
irq_update_affinity_hint() where only affinity_hint needs to be updated.
Signed-off-by: Nitesh Narayan Lal <nitesh@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210903152430.244937-13-nitesh@redhat.com
|
|
The driver uses irq_set_affinity_hint() to update the affinity_hint mask
that is consumed by the userspace to distribute the interrupts. However,
under the hood irq_set_affinity_hint() also applies the provided cpumask
(if not NULL) as the affinity for the given interrupt which is an
undocumented side effect.
To remove this side effect irq_set_affinity_hint() has been marked
as deprecated and new interfaces have been introduced. Hence, replace the
irq_set_affinity_hint() with the new interface irq_update_affinity_hint()
that only updates the affinity_hint pointer.
Signed-off-by: Nitesh Narayan Lal <nitesh@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Link: https://lore.kernel.org/r/20210903152430.244937-10-nitesh@redhat.com
|
|
The driver uses irq_set_affinity_hint() to update the affinity_hint mask
that is consumed by the userspace to distribute the interrupts. However,
under the hood irq_set_affinity_hint() also applies the provided cpumask
(if not NULL) as the affinity for the given interrupt which is an
undocumented side effect.
To remove this side effect irq_set_affinity_hint() has been marked
as deprecated and new interfaces have been introduced. Hence, replace the
irq_set_affinity_hint() with the new interface irq_update_affinity_hint()
that only updates the affinity_hint pointer.
Signed-off-by: Nitesh Narayan Lal <nitesh@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210903152430.244937-9-nitesh@redhat.com
|
|
The driver uses irq_set_affinity_hint() to update the affinity_hint mask
that is consumed by the userspace to distribute the interrupts. However,
under the hood irq_set_affinity_hint() also applies the provided cpumask
(if not NULL) as the affinity for the given interrupt which is an
undocumented side effect.
To remove this side effect irq_set_affinity_hint() has been marked
as deprecated and new interfaces have been introduced. Hence, replace the
irq_set_affinity_hint() with the new interface irq_update_affinity_hint()
that only updates the affinity_hint pointer.
Signed-off-by: Nitesh Narayan Lal <nitesh@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christian Benvenuti <benve@cisco.com>
Link: https://lore.kernel.org/r/20210903152430.244937-8-nitesh@redhat.com
|
|
The driver uses irq_set_affinity_hint() for two purposes:
- To set the affinity_hint which is consumed by the userspace for
distributing the interrupts
- To apply an affinity that it provides for the i40e interrupts
The latter is done to ensure that all the interrupts are evenly spread
across all available CPUs. However, since commit a0c9259dc4e1 ("irq/matrix:
Spread interrupts on allocation") the spreading of interrupts is
dynamically performed at the time of allocation. Hence, there is no need
for the drivers to enforce their own affinity for the spreading of
interrupts.
Also, irq_set_affinity_hint() applying the provided cpumask as an affinity
for the interrupt is an undocumented side effect. To remove this side
effect irq_set_affinity_hint() has been marked as deprecated and new
interfaces have been introduced. Hence, replace the irq_set_affinity_hint()
with the new interface irq_update_affinity_hint() that only sets the
pointer for the affinity_hint.
Signed-off-by: Nitesh Narayan Lal <nitesh@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Link: https://lore.kernel.org/r/20210903152430.244937-4-nitesh@redhat.com
|
