summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2021-12-14wilc1000: Rename SPI driver from "WILC_SPI" to "wilc1000_spi"David Mosberger-Tang
The name "wilc1000_spi" follows normal Linux conventions and also is analogous to the SDIO driver, which uses "wilc1000_sdio". Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211209044411.3482259-2-davidm@egauge.net
2021-12-14wilc1000: Fix spurious "FW not responding" errorDavid Mosberger-Tang
When deinitializing the driver, one or more "FW not responding" error appears on the console. This appears to be due to wilc_wlan_stop() disabling host/WILC1000 communication, but then right afterwards, it tries to release the bus with chip-sleep enabled. The problem is enabling the chip-sleep cannot success once host/WILC1000 communication is disabled. Fix by only releasing the bus. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211208062747.3405221-1-davidm@egauge.net
2021-12-14wilc1000: Remove misleading USE_SPI_DMA macroDavid Mosberger-Tang
The USE_SPI_DMA macro name suggests that it could be set to 1 to control whether or not SPI DMA should be used. However, that's not what it does. If set to 1, it'll set the SPI messages' "is_dma_mapped" flag to true, even though the tx/rx buffers aren't actually DMA mapped by the driver. In other words, setting this flag to 1 will break the driver. Best to clean up this confusion by removing the macro altogether. There is no need to explicitly initialize "is_dma_mapped" because the message is cleared to zero anyhow, so "is_dma_mapped" is set to false by default. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Acked-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211207002453.3193737-1-davidm@egauge.net
2021-12-14wilc1000: Fix missing newline in error messageDavid Mosberger-Tang
Add missing newline in pr_err() message. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211206232709.3192856-3-davidm@egauge.net
2021-12-14wilc1000: Fix copy-and-paste typo in wilc_set_mac_addressDavid Mosberger-Tang
The messages appears to have been copied from wilc_get_mac_address and says "get" when it should say "set". Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211206232709.3192856-2-davidm@egauge.net
2021-12-14rtw89: coex: Update COEX to 5.5.8Ching-Te Ku
Update COEX version. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211209083229.10815-8-pkshih@realtek.com
2021-12-14rtw89: coex: Cancel PS leaving while C2H comesChing-Te Ku
It's unnecessary to leave WL PS while C2H comes. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211209083229.10815-7-pkshih@realtek.com
2021-12-14rtw89: coex: Update BT counters while receiving reportChing-Te Ku
Move _chk_btc_err and update_bt_cnt to _chk_btc_report(), so we can update counter/info to COEX at a proper moment, instead of relying on a user does cat the debug info periodically. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211209083229.10815-6-pkshih@realtek.com
2021-12-14rtw89: coex: Define LPS state for BTC usingChing-Te Ku
To distinguish three types of LPS state. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211209083229.10815-5-pkshih@realtek.com
2021-12-14rtw89: coex: Add MAC API to get BT polluted counterChing-Te Ku
Add function to get and parse BT polluted counter. When WLAN Tx was dropped by BT, the packet will be marked as BT polluted. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211209083229.10815-4-pkshih@realtek.com
2021-12-14rtw89: coex: Not to send H2C when WL not ready and count H2CChing-Te Ku
Prevent to send H2C request to FW when BTC is not initialized or WL is under power saving. Add counter to count the H2C success or fail. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211209083229.10815-3-pkshih@realtek.com
2021-12-14rtw89: coex: correct C2H header lengthChing-Te Ku
To resolve C2H handle length mismatch, or it will parse the c2h content out of array. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211209083229.10815-2-pkshih@realtek.com
2021-12-14ice: Remove unused ICE_FLOW_SEG_HDRS_L2_MASKTony Nguyen
Remove the unused define ICE_FLOW_SEG_HDRS_L2_MASK. Reported-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Acked-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Gurucharan G <gurucharanx.g@intel.com>
2021-12-14ice: Remove unnecessary castsDan Carpenter
The "bitmap" variable is already an unsigned long so there is no need for this cast. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-14ice: Propagate error codesTony Nguyen
As all functions now return standard error codes, propagate the values being returned instead of converting them to generic values. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com>
2021-12-14ice: Remove excess error variablesTony Nguyen
ice_status previously had a variable to contain these values where other error codes had a variable as well. With ice_status now being an int, there is no need for two variables to hold error values. In cases where this occurs, remove one of the excess variables and use a single one. Some initialization of variables are no longer needed and have been removed. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com>
2021-12-14ice: Cleanup after ice_status removalTony Nguyen
Clean up code after changing ice_status to int. Rearrange to fix reverse Christmas tree and pull lines up where applicable. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com>
2021-12-14ice: Remove enum ice_statusTony Nguyen
Replace uses of ice_status to, as equivalent as possible, error codes. Remove enum ice_status and its helper conversion function as they are no longer needed. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com>
2021-12-14ice: Use int for ice_statusTony Nguyen
To prepare for removal of ice_status, change the variables from ice_status to int. This eases the transition when values are changed to return standard int error codes over enum ice_status. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com>
2021-12-14ice: Remove string printing for ice_statusTony Nguyen
Remove the ice_stat_str() function which prints the string representation of the ice_status error code. With upcoming changes moving away from ice_status, there will be no need for this function. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com>
2021-12-14ice: Refactor status flow for DDP loadWojciech Drewek
Before this change, final state of the DDP pkg load process was dependent on many variables such as: ice_status, pkg version, ice_aq_err. The last one had be stored in hw->pkg_dwnld_status. It was impossible to conclude this state just from ice_status, that's why logging process of DDP pkg load in the caller was a little bit complicated. With this patch new status enum is introduced - ice_ddp_state. It covers all the possible final states of the loading process. What's tricky for ice_ddp_state is that not only ICE_DDP_PKG_SUCCESS(=0) means that load was successful. Actually three states mean that: - ICE_DDP_PKG_SUCCESS - ICE_DDP_PKG_SAME_VERSION_ALREADY_LOADED - ICE_DDP_PKG_COMPATIBLE_ALREADY_LOADED ice_is_init_pkg_successful can tell that information. One ddp_state should not be used outside of ice_init_pkg which is ICE_DDP_PKG_ALREADY_LOADED. It is more generic, it is used in ice_dwnld_cfg_bufs to see if pkg is already loaded. At this point we can't use one of the specific one (SAME_VERSION, COMPATIBLE, NOT_SUPPORTED) because we don't have information on the package currently loaded in HW (we are before calling ice_get_pkg_info). We can get rid of hw->pkg_dwnld_status because we are immediately mapping aq errors to ice_ddp_state in ice_dwnld_cfg_bufs. Other errors like ICE_ERR_NO_MEMORY, ICE_ERR_PARAM are mapped the generic ICE_DDP_PKG_ERR. Suggested-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-14ice: Refactor promiscuous functionsBrett Creeley
Some of the promiscuous mode functions take a boolean to indicate set/clear, which affects readability. Refactor and provide an interface for the promiscuous mode code with explicit set and clear promiscuous mode operations. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-14ice: refactor PTYPE validatingJeff Guo
Since the capability of a PTYPE within a specific package could be negotiated by checking the HW bit map, it means that there's no need to maintain a different PTYPE list for each type of the package when parsing PTYPE. So refactor the PTYPE validating mechanism. Signed-off-by: Jeff Guo <jia.guo@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-14ice: Add package PTYPE enable informationHaiyue Wang
Scan the 'Marker Ptype TCAM' section to retrieve the Rx parser PTYPE enable information from the current package. Signed-off-by: Haiyue Wang <haiyue.wang@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-14ath11k: Change qcn9074 fw to operate in mode-2Seevalamuthu Mariappan
In mode-2 QCN9074 firmware uses 15MB of host memory and firmware request 1MB size segements in QMI, whereas in mode-0 firmware uses 45MB of host memory and each segment is of 2MB size. In mode-2 firmware operates with reduced number of vdevs and peers. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01838-QCAHKSWPL_SILICONZ-1 Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211209104351.9811-3-kvalo@kernel.org
2021-12-14ath11k: add ab to TARGET_NUM_VDEVS & coKalle Valo
The next patch changes TARGET_NUM_VDEVS to be dynamic and need access to ab. Add ab separately to keep the next patch simple. Compile tested only. Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211209104351.9811-2-kvalo@kernel.org
2021-12-14ath11k: Fix a NULL pointer dereference in ath11k_mac_op_hw_scan()Zhou Qingyang
In ath11k_mac_op_hw_scan(), the return value of kzalloc() is directly used in memcpy(), which may lead to a NULL pointer dereference on failure of kzalloc(). Fix this bug by adding a check of arg.extraie.ptr. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_ATH11K=m show no new warnings, and our static analyzer no longer warns about this code. Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Zhou Qingyang <zhou1615@umn.edu> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211202155348.71315-1-zhou1615@umn.edu
2021-12-14ibmvnic: remove unused definesDany Madden
IBMVNIC_STATS_TIMEOUT and IBMVNIC_INIT_FAILED are not used in the driver. Remove them. Suggested-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-14ibmvnic: Update driver return codesDany Madden
Update return codes to be more informative. Signed-off-by: Jacob Root <otis@otisroot.com> Signed-off-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-14mlxsw: spectrum_router: Consolidate MAC profiles when possibleDanielle Ratson
Currently, when setting a router interface (RIF) MAC address while the MAC profile is not shared with other RIFs, the profile is edited so that the new MAC address is assigned to it. This does not take into account a situation in which the new MAC address already matches an existing MAC profile. In that situation, two MAC profiles will be occupied even though they hold MAC addresses from the same profile. In order to prevent that, add a check to ensure that editing a MAC profile takes place only when the new MAC address does not match an existing profile. Fixes: 605d25cd782a6 ("mlxsw: spectrum_router: Add RIF MAC profiles support") Reported-by: Maksym Yaremchuk <maksymy@nvidia.com> Tested-by: Maksym Yaremchuk <maksymy@nvidia.com> Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-14net: dsa: sja1105: fix broken connection with the sja1110 taggerVladimir Oltean
The driver was incorrectly converted assuming that "sja1105" is the only tagger supported by this driver. This results in SJA1110 switches failing to probe: sja1105 spi1.0: Unable to connect to tag protocol "sja1110": -EPROTONOSUPPORT sja1105: probe of spi1.2 failed with error -93 Add DSA_TAG_PROTO_SJA1110 to the list of supported taggers by the sja1105 driver. The sja1105_tagger_data structure format is common for the two tagging protocols. Fixes: c79e84866d2a ("net: dsa: tag_sja1105: convert to tagger-owned data") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-14Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-12-13 This series contains updates to iavf driver only. Dan Carpenter fixes some missing mutex unlocking. Stefan Assmann restores stopping watchdog from overriding to reset state. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-14bareudp: Add extack support to bareudp_configure()Guillaume Nault
Add missing extacks for common configuration errors. Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-14net: stmmac: fix tc flower deletion for VLAN priority Rx steeringOng Boon Leong
To replicate the issue:- 1) Add 1 flower filter for VLAN Priority based frame steering:- $ IFDEVNAME=eth0 $ tc qdisc add dev $IFDEVNAME ingress $ tc qdisc add dev $IFDEVNAME root mqprio num_tc 8 \ map 0 1 2 3 4 5 6 7 0 0 0 0 0 0 0 0 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0 $ tc filter add dev $IFDEVNAME parent ffff: protocol 802.1Q \ flower vlan_prio 0 hw_tc 0 2) Get the 'pref' id $ tc filter show dev $IFDEVNAME ingress 3) Delete a specific tc flower record (say pref 49151) $ tc filter del dev $IFDEVNAME parent ffff: pref 49151 From dmesg, we will observe kernel NULL pointer ooops [ 197.170464] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 197.171367] #PF: supervisor read access in kernel mode [ 197.171367] #PF: error_code(0x0000) - not-present page [ 197.171367] PGD 0 P4D 0 [ 197.171367] Oops: 0000 [#1] PREEMPT SMP NOPTI <snip> [ 197.171367] RIP: 0010:tc_setup_cls+0x20b/0x4a0 [stmmac] <snip> [ 197.171367] Call Trace: [ 197.171367] <TASK> [ 197.171367] ? __stmmac_disable_all_queues+0xa8/0xe0 [stmmac] [ 197.171367] stmmac_setup_tc_block_cb+0x70/0x110 [stmmac] [ 197.171367] tc_setup_cb_destroy+0xb3/0x180 [ 197.171367] fl_hw_destroy_filter+0x94/0xc0 [cls_flower] The above issue is due to previous incorrect implementation of tc_del_vlan_flow(), shown below, that uses flow_cls_offload_flow_rule() to get struct flow_rule *rule which is no longer valid for tc filter delete operation. struct flow_rule *rule = flow_cls_offload_flow_rule(cls); struct flow_dissector *dissector = rule->match.dissector; So, to ensure tc_del_vlan_flow() deletes the right VLAN cls record for earlier configured RX queue (configured by hw_tc) in tc_add_vlan_flow(), this patch introduces stmmac_rfs_entry as driver-side flow_cls_offload record for 'RX frame steering' tc flower, currently used for VLAN priority. The implementation has taken consideration for future extension to include other type RX frame steering such as EtherType based. v2: - Clean up overly extensive backtrace and rewrite git message to better explain the kernel NULL pointer issue. Fixes: 0e039f5cf86c ("net: stmmac: add RX frame steering based on VLAN priority in tc flower") Tested-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-14Merge branch 'irq/urgent' into irq/msiThomas Gleixner
to pick up the PCI/MSI-x fixes. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2021-12-14Bonding: force user to add HWTSTAMP_FLAG_BONDED_PHC_INDEX when get/set HWTSTAMPHangbin Liu
When there is a failover, the PHC index of bond active interface will be changed. This may break the user space program if the author didn't aware. By setting this flag, the user should aware that the PHC index get/set by syscall is not stable. And the user space is able to deal with it. Without this flag, the kernel will reject the request forwarding to bonding. Reported-by: Jakub Kicinski <kuba@kernel.org> Fixes: 94dd016ae538 ("bond: pass get_ts_info and SIOC[SG]HWTSTAMP ioctl to active device") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-14net_tstamp: add new flag HWTSTAMP_FLAG_BONDED_PHC_INDEXHangbin Liu
Since commit 94dd016ae538 ("bond: pass get_ts_info and SIOC[SG]HWTSTAMP ioctl to active device") the user could get bond active interface's PHC index directly. But when there is a failover, the bond active interface will change, thus the PHC index is also changed. This may break the user's program if they did not update the PHC timely. This patch adds a new hwtstamp_config flag HWTSTAMP_FLAG_BONDED_PHC_INDEX. When the user wants to get the bond active interface's PHC, they need to add this flag and be aware the PHC index may be changed. With the new flag. All flag checks in current drivers are removed. Only the checking in net_hwtstamp_validate() is kept. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-13net/mlx5: Create more priorities for FDB bypass namespaceMaor Gottlieb
Create 16 flow steering priorities for FDB bypass users. Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-13net/mlx5: Refactor mlx5_get_flow_namespaceMaor Gottlieb
Have all the namespace type check in the same switch case. Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-13net/mlx5: Separate FDB namespaceMaor Gottlieb
This patch doesn't add an additional namespaces, but just separates the naming to be used by each FDB user, bypass and kernel. Downstream patches will actually split this up and allow to have more than single priority for the bypass users. Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Acked-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-14xsk: Wipe out dead zero_copy_allocator declarationsMaciej Fijalkowski
zero_copy_allocator has been removed back when Bjorn Topel introduced xsk_buff_pool. Remove references to it that were dangling in the tree. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/20211210171511.11574-1-maciej.fijalkowski@intel.com
2021-12-13bpf: Let bpf_warn_invalid_xdp_action() report more infoPaolo Abeni
In non trivial scenarios, the action id alone is not sufficient to identify the program causing the warning. Before the previous patch, the generated stack-trace pointed out at least the involved device driver. Let's additionally include the program name and id, and the relevant device name. If the user needs additional infos, he can fetch them via a kernel probe, leveraging the arguments added here. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/ddb96bb975cbfddb1546cf5da60e77d5100b533c.1638189075.git.pabeni@redhat.com
2021-12-13brcmfmac: Fix incorrect type assignments for keep-aliveLoic Poulain
cpu_to_le16 has been used for all keep-alive fields, but 'perdio_msec' is a 32-bit field and 'keep_alive_id' a 8-bit one. Fix that. Fixes: 7a6cfe28ae3e ("brcmfmac: Configure keep-alive packet on suspend") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/1638953708-29192-1-git-send-email-loic.poulain@linaro.org
2021-12-13iavf: do not override the adapter state in the watchdog task (again)Stefan Assmann
The watchdog task incorrectly changes the state to __IAVF_RESETTING, instead of letting the reset task take care of that. This was already resolved by commit 22c8fd71d3a5 ("iavf: do not override the adapter state in the watchdog task") but the problem was reintroduced by the recent code refactoring in commit 45eebd62999d ("iavf: Refactor iavf state machine tracking"). Fixes: 45eebd62999d ("iavf: Refactor iavf state machine tracking") Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-13exit: Rename complete_and_exit to kthread_complete_and_exitEric W. Biederman
Update complete_and_exit to call kthread_exit instead of do_exit. Change the name to reflect this change in functionality. All of the users of complete_and_exit are causing the current kthread to exit so this change makes it clear what is happening. Move the implementation of kthread_complete_and_exit from kernel/exit.c to to kernel/kthread.c. As this function is kthread specific it makes most sense to live with the kthread functions. There are no functional change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-12-13iavf: missing unlocks in iavf_watchdog_task()Dan Carpenter
This code was re-organized and there some unlocks missing now. Fixes: 898ef1cb1cb2 ("iavf: Combine init and watchdog state machines") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-13net: mtk_eth: add COMPILE_TEST supportLorenzo Bianconi
Improve the build testing of mtk_eth drivers by enabling them when COMPILE_TEST is selected. Moreover COMPILE_TEST will be useful for the driver development. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-13net: stmmac: Add GFP_DMA32 for rx buffers if no 64 capabilityDavid Wu
Use page_pool_alloc_pages instead of page_pool_dev_alloc_pages, which can give the gfp parameter, in the case of not supporting 64-bit width, using 32-bit address memory can reduce a copy from swiotlb. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-13net: phy: add a note about refcountingRussell King (Oracle)
Recently, a patch has been submitted to "fix" the refcounting for a DT node in of_mdiobus_link_mdiodev(). This is not a leaked refcount. The refcount is passed to the new device. Sadly, coccicheck identifies this location as a leaked refcount, which means we're likely to keep getting patches to "fix" this. However, fixing this will cause breakage. Add a comment to state that the lack of of_node_put() here is intentional. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-13mt76: remove variable set but not usedYang Li
The code that uses variable queued has been removed, and "mt76_is_usb(dev) ? q->ndesc - q->queued : q->queued" didn't do anything, so all they should be removed as well. Eliminate the following clang warnings: drivers/net/wireless/mediatek/mt76/debugfs.c:77:9: warning: variable ‘queued’ set but not used. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Fixes: 2d8be76c1674 ("mt76: debugfs: improve queue node readability") Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2026-09-10 05:30:32 +0000