| Age | Commit message (Collapse) | Author |
|---|
|
When CPT_AF_DIAG[FLT_DIS] = 0 and a CPT engine access to
LLC/DRAM encounters a fault/poison, a rare case may result
in unpredictable data being delivered to a CPT engine.
So, this patch adds code to set FLT_DIS as a workaround.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Nothing in ipv6.h needs ndisc.h, drop it.
Link: https://lore.kernel.org/r/20220203043457.2222388-1-kuba@kernel.org
Acked-by: Jeremy Kerr <jk@codeconstruct.com.au>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Link: https://lore.kernel.org/r/20220203231240.2297588-1-kuba@kernel.org
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The size of the status_driver_data field was not adjusted when
the is_valid_ack_signal field was added.
Since the size of struct ieee80211_tx_info is limited, replace
the is_valid_ack_signal field with a flags field, and adjust the
struct size accordingly.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220202104617.0ff363d4fa56.I45792c0187034a6d0e1c99a7db741996ef7caba3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There's currently only one driver that reports CHECKSUM_COMPLETE,
that is iwlwifi. The current hardware there calculates checksum
after the SNAP header, but only RFC 1042 (and some other cases,
but replicating the exact hardware logic for corner cases in the
driver seemed awkward.)
Newer generations of hardware will checksum _including_ the SNAP,
which makes things easier.
To handle that, simply always assume the checksum _includes_ the
SNAP header, which this patch does, requiring to first add it
for older iwlwifi hardware, and then remove it again later on
conversion.
Alternatively, we could have:
1) Always assumed the checksum starts _after_ the SNAP header;
the problem with this is that we'd have to replace the exact
"what is the SNAP" check in iwlwifi that cfg80211 has.
2) Made it configurable with some flag, but that seemed like too
much complexity.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220202104617.230736e19e0e.I3e6745873585ad943c152fab9e23b5221f17a95f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Check ndesc of q_rx to avoid potential hole in iteration.
This is an intermediate patch to add mt7986 support.
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
From 4.17 onwards the ixgbevf driver uses build_skb() to build an skb
around new data in the page buffer shared with the ixgbe PF.
This uses either a 2K or 3K buffer, and offsets the DMA mapping by
NET_SKB_PAD + NET_IP_ALIGN. When using a smaller buffer RXDCTL is set to
ensure the PF does not write a full 2K bytes into the buffer, which is
actually 2K minus the offset.
However on the 82599 virtual function, the RXDCTL mechanism is not
available. The driver attempts to work around this by using the SET_LPE
mailbox method to lower the maximm frame size, but the ixgbe PF driver
ignores this in order to keep the PF and all VFs in sync[0].
This means the PF will write up to the full 2K set in SRRCTL, causing it
to write NET_SKB_PAD + NET_IP_ALIGN bytes past the end of the buffer.
With 4K pages split into two buffers, this means it either writes
NET_SKB_PAD + NET_IP_ALIGN bytes past the first buffer (and into the
second), or NET_SKB_PAD + NET_IP_ALIGN bytes past the end of the DMA
mapping.
Avoid this by only enabling build_skb when using "large" buffers (3K).
These are placed in each half of an order-1 page, preventing the PF from
writing past the end of the mapping.
[0]: Technically it only ever raises the max frame size, see
ixgbe_set_vf_lpe() in ixgbe_sriov.c
Fixes: f15c5ba5b6cd ("ixgbevf: add support for using order 1 pages to receive large frames")
Signed-off-by: Samuel Mendoza-Jonas <samjonas@amazon.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rather than tracking the number of receive buffer transactions that
have been submitted without a doorbell, just track the total number
of transactions that have been issued. Then ring the doorbell when
that number modulo the replenish batch size is 0.
The effect is roughly the same, but the new count is slightly more
interesting, and this approach will someday allow the replenish
batch size to be tuned at runtime.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replenishing is now solely driven by whether transactions are
available for a channel, and it doesn't really matter whether
we replenish before or after we deliver received packets to the
network stack.
Replenishing before delivering the payload adds a little latency.
Eliminate that by requesting a replenish after the payload is
delivered.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We no longer use the replenish_backlog atomic variable to decide
when we've got work to do providing receive buffers to hardware.
Basically, we try to keep the hardware as full as possible, all the
time. We keep supplying buffers until the hardware has no more
space for them.
As a result, we can get rid of the replenish_backlog field and the
atomic operations performed on it.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Create a new function that returns true if all transactions for a
channel are available for use.
Use it in ipa_endpoint_replenish_enable() to see whether to start
replenishing, and in ipa_endpoint_replenish() to determine whether
it's necessary after a failure to schedule delayed work to ensure a
future replenish attempt occurs.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rather than determining when to stop replenishing using the
replenish backlog, just stop when we have exhausted all available
transactions.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When replenishing, have ipa_endpoint_replenish() allocate a
transaction, and pass that to ipa_endpoint_replenish_one() to fill.
Then, if that produces no error, commit the transaction within the
replenish loop as well. In this way we can distinguish between
transaction failures and buffer allocation/mapping failures.
Failure to allocate a transaction simply means the hardware already
has as many receive buffers as it can hold. In that case we can
break out of the replenish loop because there's nothing more to do.
If we fail to allocate or map pages for the receive buffer, just
try again later.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Decide whether the doorbell should be signaled when committing a
replenish transaction in the main replenish loop, rather than in
ipa_endpoint_replenish_one(). This is a step to facilitate the
next patch.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Three spots call ipa_endpoint_replenish(), and just one of those
requests that the backlog be incremented after completing the
replenish operation.
Instead, have the caller increment the backlog, and get rid of the
add_one argument to ipa_endpoint_replenish().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A transaction failure only occurs if no more transactions are
available for an endpoint. It's a very cheap test.
When replenishing an RX endpoint buffer, there's no point in
allocating pages if transactions are exhausted. So don't bother
doing so unless the transaction allocation succeeds.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The replenish_saved field keeps track of the number of times a new
buffer is added to the backlog when replenishing is disabled. We
don't really use it though, so there's no need for us to track it
separately. Whether replenishing is enabled or not, we can simply
increment the backlog.
Get rid of replenish_saved, and initialize and increment the backlog
where it would have otherwise been used.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Populate the supported interfaces and MAC capabilities for the Realtek
rtl8365 DSA switch and remove the old validate implementation to allow
DSA to use phylink_generic_validate() for this switch driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
40GbE Intel Wired LAN Driver Updates 2022-02-03
This series contains updates to the i40e client header file and driver.
Mateusz disables HW TC offload by default.
Joe Damato removes a no longer used statistic.
Jakub Kicinski removes an unused enum from the client header file.
Jedrzej changes some admin queue commands to occur under atomic context
and adds new functions for admin queue MAC VLAN filters to avoid a
potential race that could occur due storing results in a structure that
could be overwritten by the next admin queue call.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Convert lan966x to use the mac_select_interface instead of
phylink_set_pcs.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20220202114949.833075-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This problem was found with Sparx5 when the tcpdump tool requests the
do_get_stats64 (sparx5_get_stats64) statistic.
The portstats pointer was incorrectly incremented when fetching priority
based statistics.
Fixes: af4b11022e2d (net: sparx5: add ethtool configuration and statistics support)
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Link: https://lore.kernel.org/r/20220203102900.528987-1-steen.hegelund@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ice driver provides QoS information to auxiliary drivers
through the exported function ice_get_qos_params. This function
doesn't currently support L3 DSCP QoS.
Add the necessary defines, structure elements and code to support
DSCP QoS through the IIDC functions.
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Even if protected from preemption and interrupts, a small time window
remains when the 2 register reads could return inconsistent values,
each time the "seconds" register changes. This could lead to an about
1-second error in the reported time.
Add logic to ensure the "seconds" and "nanoseconds" values are consistent.
Fixes: 92ba6888510c ("stmmac: add the support for PTP hw clock driver")
Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20220203160025.750632-1-yannick.vignon@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There was a race condition in access to hw->aq.asq_last_status
while adding and deleting MAC/VLAN filters causing
incorrect error status to be printed as ERROR OK instead of
the correct error.
Change calls to i40e_aq_add_macvlan in i40e_aqc_add_filters
and i40e_aq_remove_macvlan in i40e_aqc_del_filters
to _v2 versions that return Admin Queue status on the stack
to avoid race conditions in access to hw->aq.asq_last_status.
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
ASQ send command functions are returning only i40e status codes
yet some calling functions also need Admin Queue status
that is stored in hw->aq.asq_last_status. Since hw object
is stored on a heap it introduces a possibility for
a race condition in access to hw if calling function is not
fast enough to read hw->aq.asq_last_status before next
send ASQ command is executed.
Add new _v2 version of i40e_aq_add_macvlan that is using
new _v2 versions of ASQ send command functions and returns
the Admin Queue status on the stack.
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
ASQ send command functions are returning only i40e status codes
yet some calling functions also need Admin Queue status
that is stored in hw->aq.asq_last_status. Since hw object
is stored on a heap it introduces a possibility for
a race condition in access to hw if calling function is not
fast enough to read hw->aq.asq_last_status before next
send ASQ command is executed.
Add new versions of send ASQ command functions that return
Admin Queue status on the stack to avoid race conditions
in access to hw->aq.asq_last_status.
Add new _v2 version of i40e_aq_remove_macvlan that is using
new _v2 versions of ASQ send command functions and returns
the Admin Queue status on the stack.
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Change functions:
- i40e_aq_add_macvlan
- i40e_aq_remove_macvlan
- i40e_aq_delete_element
- i40e_aq_add_vsi
- i40e_aq_update_vsi_params
to explicitly use i40e_asq_send_command_atomic(..., true)
instead of i40e_asq_send_command, as they use mutexes and do some
work in an atomic context.
Without this change setting vlan via netdev will fail with
call trace cased by bug "BUG: scheduling while atomic".
Signed-off-by: Witold Fijalkowski <witoldx.fijalkowski@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
After commit 1a557afc4dd5 ("i40e: Refactor receive routine"),
rx_stats.realloc_count is no longer being incremented, so remove it.
The debugfs string was left, but hardcoded to 0. This is intended to
prevent breaking any existing code / scripts that are parsing debugfs
for i40e.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
After loading driver hw-tc-offload is enabled by default.
Change the behaviour of driver to disable hw-tc-offload by default as
this is the expected state. Additionally since this impacts ntuple
feature state change the way of checking NETIF_F_HW_TC flag.
Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com>
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In some cases, the IPA hardware needs to request the always-on
subsystem (AOSS) to coordinate with the IPA microcontroller to
retain IPA register values at power collapse. This is done by
issuing a QMP request to the AOSS microcontroller. A similar
request ondoes that request.
We must get and hold the "QMP" handle early, because we might get
back EPROBE_DEFER for that. But the actual request should be sent
while we know the IPA clock is active, and when we know the
microcontroller is operational.
Fixes: 1aac309d3207 ("net: ipa: use autosuspend")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Even if it is only a false-positive since skip_buf0/skip_buf1 are only
used in mt76_dma_tx_cleanup_idx routine, initialize skip_unmap in
mt76_dma_rx_fill in order to fix the following UBSAN report:
[ 13.924906] UBSAN: invalid-load in linux-5.15.0/drivers/net/wireless/mediatek/mt76/dma.c:162:13
[ 13.924909] load of value 225 is not a valid value for type '_Bool'
[ 13.924912] CPU: 9 PID: 672 Comm: systemd-udevd Not tainted 5.15.0-18-generic #18-Ubuntu
[ 13.924914] Hardware name: LENOVO 21A0000CMX/21A0000CMX, BIOS R1MET43W (1.13 ) 11/05/2021
[ 13.924915] Call Trace:
[ 13.924917] <TASK>
[ 13.924920] show_stack+0x52/0x58
[ 13.924925] dump_stack_lvl+0x4a/0x5f
[ 13.924931] dump_stack+0x10/0x12
[ 13.924932] ubsan_epilogue+0x9/0x45
[ 13.924934] __ubsan_handle_load_invalid_value.cold+0x44/0x49
[ 13.924935] ? __iommu_dma_map+0x84/0xf0
[ 13.924939] mt76_dma_add_buf.constprop.0.cold+0x23/0x85 [mt76]
[ 13.924949] mt76_dma_rx_fill.isra.0+0x102/0x1f0 [mt76]
[ 13.924954] mt76_dma_init+0xc9/0x150 [mt76]
[ 13.924959] ? mt7921_dma_enable+0x110/0x110 [mt7921e]
[ 13.924966] mt7921_dma_init+0x1e3/0x260 [mt7921e]
[ 13.924970] mt7921_register_device+0x29d/0x510 [mt7921e]
[ 13.924975] mt7921_pci_probe.part.0+0x17f/0x1b0 [mt7921e]
[ 13.924980] mt7921_pci_probe+0x43/0x60 [mt7921e]
[ 13.924984] local_pci_probe+0x4b/0x90
[ 13.924987] pci_device_probe+0x115/0x1f0
[ 13.924989] really_probe+0x21e/0x420
[ 13.924992] __driver_probe_device+0x115/0x190
[ 13.924994] driver_probe_device+0x23/0xc0
[ 13.924996] __driver_attach+0xbd/0x1d0
[ 13.924998] ? __device_attach_driver+0x110/0x110
[ 13.924999] bus_for_each_dev+0x7e/0xc0
[ 13.925001] driver_attach+0x1e/0x20
[ 13.925003] bus_add_driver+0x135/0x200
[ 13.925005] driver_register+0x95/0xf0
[ 13.925008] ? 0xffffffffc0766000
[ 13.925010] __pci_register_driver+0x68/0x70
[ 13.925011] mt7921_pci_driver_init+0x23/0x1000 [mt7921e]
[ 13.925015] do_one_initcall+0x48/0x1d0
[ 13.925019] ? kmem_cache_alloc_trace+0x19e/0x2e0
[ 13.925022] do_init_module+0x62/0x280
[ 13.925025] load_module+0xac9/0xbb0
[ 13.925027] __do_sys_finit_module+0xbf/0x120
[ 13.925029] __x64_sys_finit_module+0x18/0x20
[ 13.925030] do_syscall_64+0x5c/0xc0
[ 13.925033] ? do_syscall_64+0x69/0xc0
[ 13.925034] ? sysvec_reschedule_ipi+0x78/0xe0
[ 13.925036] ? asm_sysvec_reschedule_ipi+0xa/0x20
[ 13.925039] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 13.925040] RIP: 0033:0x7fbf2b90f94d
[ 13.925045] RSP: 002b:00007ffe2ec7e5d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 13.925047] RAX: ffffffffffffffda RBX: 000056106b0634e0 RCX: 00007fbf2b90f94d
[ 13.925048] RDX: 0000000000000000 RSI: 00007fbf2baa3441 RDI: 0000000000000013
[ 13.925049] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000002
[ 13.925050] R10: 0000000000000013 R11: 0000000000000246 R12: 00007fbf2baa3441
[ 13.925051] R13: 000056106b062620 R14: 000056106b0610c0 R15: 000056106b0640d0
[ 13.925053] </TASK>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Do not always copy ethernet header in mt{7615,7915,7921}_reverse_frag0_hdr_trans
and use a pointer instead.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Fixes corner cases in enabling/disabling detector
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Copy the updated logic from mt7915 to to fix issues in handling DFS radar
detector states
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Client mode on DFS channels was broken, because the old code was activating
the DFS detector on radar channels while leaving it in CAC state.
This was caused by making the decision based on the channel radar flag,
instead of hw->conf.radar_enabled.
In order to properly deal with the various corner cases, rip out the state
handling code and replace it with something that's much easier to reason
about.
Tested-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
The decision whether to report serdes statistics currently depends on
the cached C_Mode value for the port, read at probe time or updated by
configuration. However, port 4 can be in "automedia" mode when it is
used as a serdes port, meaning it switches between the internal PHY and
the serdes, changing the read-only C_Mode value depending on which
first gains link. Consequently, the C_Mode value read at probe does not
accurately reflect whether the port has the serdes associated with it.
In "net: dsa: mv88e6xxx: add mv88e6352_g2_scratch_port_has_serdes()",
we added a way to read the hardware configuration to determine which
port has the serdes associated with it. Use this to determine which
port reports the serdes statistics.
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that the mv88e6xxx chip drivers are supplying the supported
interfaces and MAC capabilities, switch the driver to use the generic
phylink validation implementation by removing our own validation
implementations. This causes DSA to call phylink_generic_validate()
on our behalf.
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Populate the supported interfaces and MAC capabilities for the
Marvell MV88E6xxx DSA switches in preparation to using these for the
validation functionality.
Patch co-authored by Marek.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Marek Behún <kabel@kernel.org> [ fixed 6341 and 6393x ]
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Read the hardware configuration to determine which port is attached
to the serdes.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Given that standalone ports are now configured to bypass the ATU and
forward all frames towards the upstream port, extend the ATU bypass to
multichip systems.
Load VID 0 (standalone) into the VTU with the policy bit set. Since
VID 4095 (bridged) is already loaded, we now know that all VIDs in use
are always available in all VTUs. Therefore, we can safely enable
802.1Q on DSA ports.
Setting the DSA ports' VTU policy to TRAP means that all incoming
frames on VID 0 will be classified as MGMT - as a result, the ATU is
bypassed on all subsequent switches.
With this isolation in place, we are able to support configurations
that are simultaneously very quirky and very useful. Quirky because it
involves looping cables between local switchports like in this
example:
CPU
| .------.
.---0---. | .----0----.
| sw0 | | | sw1 |
'-1-2-3-' | '-1-2-3-4-'
$ @ '---' $ @ % %
We have three physically looped pairs ($, @, and %).
This is very useful because it allows us to run the kernel's
kselftests for the bridge on mv88e6xxx hardware.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This chip has support for the same per-port policy actions found in
later versions of LinkStreet devices.
Fixes: f3a2cd326e44 ("net: dsa: mv88e6xxx: introduce .port_set_policy")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A VTU entry with policy enabled is used in combination with a port's
VTU policy setting to override normal switching behavior for frames
assigned to the entry's VID.
A typical example is to Treat all frames in a particular VLAN as
control traffic, and trap them to the CPU. In which case the relevant
user port's VTU policy would be set to TRAP.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Clear MapDA on standalone ports to bypass any ATU lookup that might
point the packet in the wrong direction. This means that all packets
are flooded using the PVT config. So make sure that standalone ports
are only allowed to communicate with the local upstream port.
Here is a scenario in which this is needed:
CPU
| .----.
.---0---. | .--0--.
| sw0 | | | sw1 |
'-1-2-3-' | '-1-2-'
'---'
- sw0p1 and sw1p1 are bridged
- sw0p2 and sw1p2 are in standalone mode
- Learning must be enabled on sw0p3 in order for hardware forwarding
to work properly between bridged ports
1. A packet with SA :aa comes in on sw1p2
1a. Egresses sw1p0
1b. Ingresses sw0p3, ATU adds an entry for :aa towards port 3
1c. Egresses sw0p0
2. A packet with DA :aa comes in on sw0p2
2a. If an ATU lookup is done at this point, the packet will be
incorrectly forwarded towards sw0p3. With this change in place,
the ATU is bypassed and the packet is forwarded in accordance
with the PVT, which only contains the CPU port.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of checking if any queue has not made progress since the last run,
only trigger hang detection if one of the queues has not made any progress
in 10 subsequent runs. This should reduce false positive firmware restarts
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
On AP mode devices, check beacon tx counters to detect MAC errors.
When an error is detected, stop the MAC before resetting it
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Apply sleep mode by default to reduce power consumption as possible.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
We don't have to create a separate sdio.xmit_buf buffer for each queue.
Instead, we just need to create one, reuse it across all queues to reduce
memory consumption further.
And then we should take it into account the actual the host and the device
MMC capability to determine what the appropriate xmit_buf_size can be.
Both MT7921S and MT7663 can support up to Tx FIFO size of 0x3fe00 which
means the device can receive 511 blocks of block size 512 in a row from
the host. So if the driver aggregates the frames as many as possible the
the device can support, we can merge multiple MMC requests into a single
one to get rid of the overhead of the handling and synchronizing in those
unnecessary MMC requests and reduce the SDIO lock contention with the
Bluetooth concurrent traffic and finally to have the higher bus
utilization with less idle cycle.
With the patch, it is helpful for WiFi to have steady throughput
performance especially while running Bluetooth concurrently.
Co-developed-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
without this change, the fixed MCS only supports 1 Nss.
Fixes: 70fd1333cd32f ("mt76: mt7915: rework .set_bitrate_mask() to support more options")
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
The maximum max_mpdu_size of mt7915 is 7991, whereas mt7916 can
support 11454.
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Should use peer's bandwidth instead of chandef->width to
get correct mcs_map.
Fixes: 76be6c076c077 ("mt76: mt7915: add .set_bitrate_mask() callback")
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
