summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2022-03-08ixgbe: add improvement for MDD response functionalitySlawomir Mrozowicz
The 82599 PF driver disable VF driver after a special MDD event occurs. Adds the option for administrators to control whether VFs are automatically disabled after several MDD events. The automatically disabling is now the default mode for 82599 PF driver, as it is more reliable. This addresses CVE-2021-33061. Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-08ixgbe: add the ability for the PF to disable VF link stateSlawomir Mrozowicz
Add support for ndo_set_vf_link_state the Network Device Option that allows the PF driver to control the virtual link state of the VF devices. Without this change a VF cannot be disabled/enabled by the administrator. In the implementation the auto state takes over PF link state to VF link setting, the enable state is not supported, the disable state shut off the VF link regardless of the PF setting. Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-08net: phy: lan87xx: use genphy_read_master_slave in read_statusArun Ramadoss
To read the master slave configuration of the LAN87xx T1 phy, used the generic phy driver genphy_read_master_slave function. Removed the local lan87xx_read_master_slave function. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-08net: phy: exported the genphy_read_master_slave functionArun Ramadoss
genphy_read_master_slave function allows to configure the master/slave for gigabit phys only. In order to use this function irrespective of speed, moved the speed check to the genphy_read_status call. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-08net: dsa: mt7530: fix incorrect test in mt753x_phylink_validate()Russell King (Oracle)
Discussing one of the tests in mt753x_phylink_validate() with Landen Chao confirms that the "||" should be "&&". Fix this. Fixes: c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch") Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1nRCF0-00CiXD-7q@rmk-PC.armlinux.org.uk Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-08net: lan966x: allow offloading timestamp operations to the PHYHoratiu Vultur
In case the MAC is using 'netif_rx()' to deliver the skb up the network stack, it needs to check whether 'skb_defer_rx_timestmap()' is necessary or not. In case is needed then don't call 'netif_rx()' Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20220307094632.3764266-1-horatiu.vultur@microchip.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-08net: mdio-mux: add bus name to bus idHeiner Kallweit
In case of DT-configured systems it may be hard to identify the PHY interrupt in the /proc/interrupts output. Therefore add the name to the id to make clearer that it's about a device on a muxed mdio bus. In my case: Now: mdio_mux-0.e40908ff:08 Before: 0.e40908ff:08 Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/00b4bb1e-98f9-b4e7-5549-e095a4701f66@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-07net: cxgb3: Fix an error code when probing the driverZheyu Ma
During the process of driver probing, probe function should return < 0 for failure, otherwise kernel will treat value >= 0 as success. Therefore, the driver should set 'err' to -ENODEV when 'adapter->registered_device_map' is NULL. Otherwise kernel will assume that the driver has been successfully probed and will cause unexpected errors. Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/1646546192-32737-1-git-send-email-zheyuma97@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-07ice: xsk: fix GCC version checking against pragma unroll presenceMaciej Fijalkowski
Pragma unroll was introduced around GCC 8, whereas current xsk code in ice that prepares loop_unrolled_for macro that is based on mentioned pragma, compares GCC version against 4, which is wrong and Stephen found this out by compiling kernel with GCC 5.4 [0]. Fix this mistake and check if GCC version is >= 8. [0]: https://lore.kernel.org/netdev/20220307213659.47658125@canb.auug.org.au/ Fixes: 126cdfe1007a ("ice: xsk: Improve AF_XDP ZC Tx and use batching API") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20220307231353.56638-1-maciej.fijalkowski@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-07vxlan_core: delete unnecessary conditionDan Carpenter
The previous check handled the "if (!nh)" condition so we know "nh" is non-NULL here. Delete the check and pull the code in one tab. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Roopa Prabhu <roopa@nvidia.com> Link: https://lore.kernel.org/r/20220307125735.GC16710@kili Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-07Revert "ath: add support for special 0x0 regulatory domain"Brian Norris
This reverts commit 2dc016599cfa9672a147528ca26d70c3654a5423. Users are reporting regressions in regulatory domain detection and channel availability. The problem this was trying to resolve was fixed in firmware anyway: QCA6174 hw3.0: sdio-4.4.1: add firmware.bin_WLAN.RMH.4.4.1-00042 https://github.com/kvalo/ath10k-firmware/commit/4d382787f0efa77dba40394e0bc604f8eff82552 Link: https://bbs.archlinux.org/viewtopic.php?id=254535 Link: http://lists.infradead.org/pipermail/ath10k/2020-April/014871.html Link: http://lists.infradead.org/pipermail/ath10k/2020-May/015152.html Link: https://lore.kernel.org/all/1c160dfb-6ccc-b4d6-76f6-4364e0adb6dd@reox.at/ Fixes: 2dc016599cfa ("ath: add support for special 0x0 regulatory domain") Cc: <stable@vger.kernel.org> Cc: Wen Gong <wgong@codeaurora.org> Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20200527165718.129307-1-briannorris@chromium.org
2022-03-07nds32: Remove the architectureAlan Kao
The nds32 architecture, also known as AndeStar V3, is a custom 32-bit RISC target designed by Andes Technologies. Support was added to the kernel in 2016 as the replacement RISC-V based V5 processors were already announced, and maintained by (current or former) Andes employees. As explained by Alan Kao, new customers are now all using RISC-V, and all known nds32 users are already on longterm stable kernels provided by Andes, with no development work going into mainline support any more. While the port is still in a reasonably good shape, it only gets worse over time without active maintainers, so it seems best to remove it before it becomes unusable. As always, if it turns out that there are mainline users after all, and they volunteer to maintain the port in the future, the removal can be reverted. Link: https://lore.kernel.org/linux-mm/YhdWNLUhk+x9RAzU@yamatobi.andestech.com/ Link: https://lore.kernel.org/lkml/20220302065213.82702-1-alankao@andestech.com/ Link: https://www.andestech.com/en/products-solutions/andestar-architecture/ Signed-off-by: Alan Kao <alankao@andestech.com> [arnd: rewrite changelog to provide more background] Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-03-07smsc95xx: Ignore -ENODEV errors when device is unpluggedFabio Estevam
According to Documentation/driver-api/usb/URB.rst when a device is unplugged usb_submit_urb() returns -ENODEV. This error code propagates all the way up to usbnet_read_cmd() and usbnet_write_cmd() calls inside the smsc95xx.c driver during Ethernet cable unplug, unbind or reboot. This causes the following errors to be shown on reboot, for example: ci_hdrc ci_hdrc.1: remove, state 1 usb usb2: USB disconnect, device number 1 usb 2-1: USB disconnect, device number 2 usb 2-1.1: USB disconnect, device number 3 smsc95xx 2-1.1:1.0 eth1: unregister 'smsc95xx' usb-ci_hdrc.1-1.1, smsc95xx USB 2.0 Ethernet smsc95xx 2-1.1:1.0 eth1: Failed to read reg index 0x00000114: -19 smsc95xx 2-1.1:1.0 eth1: Error reading MII_ACCESS smsc95xx 2-1.1:1.0 eth1: __smsc95xx_mdio_read: MII is busy smsc95xx 2-1.1:1.0 eth1: Failed to read reg index 0x00000114: -19 smsc95xx 2-1.1:1.0 eth1: Error reading MII_ACCESS smsc95xx 2-1.1:1.0 eth1: __smsc95xx_mdio_read: MII is busy smsc95xx 2-1.1:1.0 eth1: hardware isn't capable of remote wakeup usb 2-1.4: USB disconnect, device number 4 ci_hdrc ci_hdrc.1: USB bus 2 deregistered ci_hdrc ci_hdrc.0: remove, state 4 usb usb1: USB disconnect, device number 1 ci_hdrc ci_hdrc.0: USB bus 1 deregistered imx2-wdt 30280000.watchdog: Device shutdown: Expect reboot! reboot: Restarting system Ignore the -ENODEV errors inside __smsc95xx_mdio_read() and __smsc95xx_phy_wait_not_busy() and do not print error messages when -ENODEV is returned. Fixes: a049a30fc27c ("net: usb: Correct PHY handling of smsc95xx") Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-07qed: return status of qed_iov_get_linkTom Rix
Clang static analysis reports this issue qed_sriov.c:4727:19: warning: Assigned value is garbage or undefined ivi->max_tx_rate = tx_rate ? tx_rate : link.speed; ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ link is only sometimes set by the call to qed_iov_get_link() qed_iov_get_link fails without setting link or returning status. So change the decl to return status. Fixes: 73390ac9d82b ("qed*: support ndo_get_vf_config") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-07nfp: xsk: avoid newline at the end of message in NL_SET_ERR_MSG_MODGuo Zhengkui
Fix the following coccicheck warning: drivers/net/ethernet/netronome/nfp/nfp_net_common.c:3434:8-48: WARNING avoid newline at end of message in NL_SET_ERR_MSG_MOD Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-07net: phy: micrel: Move netif_rx() outside of IRQ-off section.Sebastian Andrzej Siewior
lan8814_match_rx_ts() invokes netif_rx() with disables interrupts outside which will create a warning. Invoking netif_rx_ni() with disabled interrupts is wrong even without the recent rework because netif_rx_ni() would enable interrupts while processing the softirq. This in turn can lead to dead lock if an interrupts triggers and attempts to acquire kszphy_ptp_priv::rx_ts_lock. Move netif_rx() outside the IRQ-off section. Cc: Andrew Lunn <andrew@lunn.ch> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Divya Koppera <Divya.Koppera@microchip.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-07net: phy: micrel: Use netif_rx().Sebastian Andrzej Siewior
Since commit baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Andrew Lunn <andrew@lunn.ch> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Divya Koppera <Divya.Koppera@microchip.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-07tun: vxlan: Use netif_rx().Sebastian Andrzej Siewior
Since commit baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-07ethernet: sun: Free the coherent when failing in probingZheyu Ma
When the driver fails to register net device, it should free the DMA region first, and then do other cleanup. Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-07micrel: Use generic ptp_msg_is_sync() functionKurt Kanzenbach
Use generic ptp_msg_is_sync() function to avoid code duplication. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-07dp83640: Use generic ptp_msg_is_sync() functionKurt Kanzenbach
Use generic ptp_msg_is_sync() function to avoid code duplication. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-07net: lantiq_xrx200: fix use after free bugAleksander Jan Bajkowski
The skb->len field is read after the packet is sent to the network stack. In the meantime, skb can be freed. This patch fixes this bug. Fixes: c3e6b2c35b34 ("net: lantiq_xrx200: add ingress SG DMA support") Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-07net: qlogic: check the return value of dma_alloc_coherent() in ↵Jia-Ju Bai
qed_vf_hw_prepare() The function dma_alloc_coherent() in qed_vf_hw_prepare() can fail, so its return value should be checked. Fixes: 1408cc1fa48c ("qed: Introduce VFs") Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-07xen/netfront: react properly to failing gnttab_end_foreign_access_ref()Juergen Gross
When calling gnttab_end_foreign_access_ref() the returned value must be tested and the reaction to that value should be appropriate. In case of failure in xennet_get_responses() the reaction should not be to crash the system, but to disable the network device. The calls in setup_netfront() can be replaced by calls of gnttab_end_foreign_access(). While at it avoid double free of ring pages and grant references via xennet_disconnect_backend() in this case. This is CVE-2022-23042 / part of XSA-396. Reported-by: Demi Marie Obenour <demi@invisiblethingslab.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> --- V2: - avoid double free V3: - remove pointless initializer (Jan Beulich)
2022-03-07xen/netfront: don't use gnttab_query_foreign_access() for mapped statusJuergen Gross
It isn't enough to check whether a grant is still being in use by calling gnttab_query_foreign_access(), as a mapping could be realized by the other side just after having called that function. In case the call was done in preparation of revoking a grant it is better to do so via gnttab_end_foreign_access_ref() and check the success of that operation instead. This is CVE-2022-23037 / part of XSA-396. Reported-by: Demi Marie Obenour <demi@invisiblethingslab.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> --- V2: - use gnttab_try_end_foreign_access() V3: - don't use gnttab_try_end_foreign_access()
2022-03-06bonding: helper macro __ATTR_RO to make code more clearLianjie Zhang
Signed-off-by: Lianjie Zhang <zhanglianjie@uniontech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-06wireless: Marvell: Use netif_rx().Sebastian Andrzej Siewior
Since commit baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Ganapathi Bhat <ganapathi017@gmail.com> Cc: Kalle Valo <kvalo@kernel.org> Cc: Sharvari Harisangam <sharvari.harisangam@nxp.com> Cc: Xinming Hu <huxinming820@gmail.com> Cc: libertas-dev@lists.infradead.org Cc: linux-wireless@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-06wireless: brcmfmac: Use netif_rx().Sebastian Andrzej Siewior
Since commit baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Arend van Spriel <aspriel@gmail.com> Cc: Chi-hsien Lin <chi-hsien.lin@infineon.com> Cc: Chung-hsien Hsu <chung-hsien.hsu@infineon.com> Cc: Franky Lin <franky.lin@broadcom.com> Cc: Hante Meuleman <hante.meuleman@broadcom.com> Cc: Kalle Valo <kvalo@kernel.org> Cc: SHA-cyfmac-dev-list@infineon.com Cc: Wright Feng <wright.feng@infineon.com> Cc: brcm80211-dev-list.pdl@broadcom.com Cc: linux-wireless@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-06wireless: Atheros: Use netif_rx().Sebastian Andrzej Siewior
Since commit baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Kalle Valo <kvalo@kernel.org> Cc: Maya Erez <merez@codeaurora.org> Cc: linux-wireless@vger.kernel.org Cc: wil6210@qti.qualcomm.com Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-06slip/plip: Use netif_rx().Sebastian Andrzej Siewior
Since commit baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-06mctp: serial: Use netif_rx().Sebastian Andrzej Siewior
Since commit baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Jeremy Kerr <jk@codeconstruct.com.au> Cc: Matt Johnston <matt@codeconstruct.com.au> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-06can: Use netif_rx().Sebastian Andrzej Siewior
Since commit baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: linux-can@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-06net: phy: Use netif_rx().Sebastian Andrzej Siewior
Since commit baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Andrew Lunn <andrew@lunn.ch> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Radu Pirea <radu-nicolae.pirea@oss.nxp.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-06net: tun: track dropped skb via kfree_skb_reason()Dongli Zhang
The TUN can be used as vhost-net backend. E.g, the tun_net_xmit() is the interface to forward the skb from TUN to vhost-net/virtio-net. However, there are many "goto drop" in the TUN driver. Therefore, the kfree_skb_reason() is involved at each "goto drop" to help userspace ftrace/ebpf to track the reason for the loss of packets. The below reasons are introduced: - SKB_DROP_REASON_DEV_READY - SKB_DROP_REASON_NOMEM - SKB_DROP_REASON_HDR_TRUNC - SKB_DROP_REASON_TAP_FILTER - SKB_DROP_REASON_TAP_TXFILTER Cc: Joao Martins <joao.m.martins@oracle.com> Cc: Joe Jin <joe.jin@oracle.com> Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-06net: tun: split run_ebpf_filter() and pskb_trim() into different "if statement"Dongli Zhang
No functional change. Just to split the if statement into different conditions to use kfree_skb_reason() to trace the reason later. Cc: Joao Martins <joao.m.martins@oracle.com> Cc: Joe Jin <joe.jin@oracle.com> Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-06net: tap: track dropped skb via kfree_skb_reason()Dongli Zhang
The TAP can be used as vhost-net backend. E.g., the tap_handle_frame() is the interface to forward the skb from TAP to vhost-net/virtio-net. However, there are many "goto drop" in the TAP driver. Therefore, the kfree_skb_reason() is involved at each "goto drop" to help userspace ftrace/ebpf to track the reason for the loss of packets. The below reasons are introduced: - SKB_DROP_REASON_SKB_CSUM - SKB_DROP_REASON_SKB_GSO_SEG - SKB_DROP_REASON_SKB_UCOPY_FAULT - SKB_DROP_REASON_DEV_HDR - SKB_DROP_REASON_FULL_RING Cc: Joao Martins <joao.m.martins@oracle.com> Cc: Joe Jin <joe.jin@oracle.com> Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05bnxt_en: add an nvm test for hw diagnoseVikas Gupta
Add an NVM test function for devlink hw reporter. In this function an NVM VPD area is read followed by a write. Test result is cached and if it is successful then the next test can be conducted only after HW_RETEST_MIN_TIME to avoid frequent writes to the NVM. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05bnxt_en: implement hw health reporterKalesh AP
This reporter will report NVM errors which are non-fatal. When we receive these NVM error events, we'll report it through this new hw health reporter. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05bnxt_en: Do not destroy health reporters during resetEdwin Peer
Health reporter state should be maintained over resets. Previously reporters were destroyed if the device capabilities changed, but since none of the reporters depend on capabilities anymore, this logic should be removed. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05bnxt_en: Eliminate unintended link toggle during FW resetMichael Chan
If the flow control settings have been changed, a subsequent FW reset may cause the ethernet link to toggle unnecessarily. This link toggle will increase the down time by a few seconds. The problem is caused by bnxt_update_phy_setting() detecting a false mismatch in the flow control settings between the stored software settings and the current FW settings after the FW reset. This mismatch is caused by the AUTONEG bit added to link_info->req_flow_ctrl in an inconsistent way in bnxt_set_pauseparam() in autoneg mode. The AUTONEG bit should not be added to link_info->req_flow_ctrl. Reviewed-by: Colin Winegarden <colin.winegarden@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05bnxt_en: Properly report no pause support on some cardsMichael Chan
Some cards are configured to never support link pause or PFC. Discover these cards and properly report no pause support to ethtool. Disable PFC settings from DCBNL if PFC is unsupported. Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05bnxt_en: introduce initial link state of unknownEdwin Peer
This will force link state to always be logged for initial NIC open. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05bnxt_en: parse result field when NVRAM package install failsKalesh AP
Instead of always returning -ENOPKG, decode the firmware error code further when the HWRM_NVM_INSTALL_UPDATE firmware call fails. Return a more suitable error code to userspace and log an error in dmesg. Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05bnxt_en: add more error checks to HWRM_NVM_INSTALL_UPDATEKalesh AP
FW returns error code "NVM_INSTALL_UPDATE_CMD_ERR_CODE_ANTI_ROLLBACK" in the response to indicate that HWRM_NVM_INSTALL_UPDATE command has failed due to Anti-rollback feature. Parse the error and return an appropriate error code to the user. Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05bnxt_en: refactor error handling of HWRM_NVM_INSTALL_UPDATEKalesh AP
This is in anticipation of handling more "cmd_err" from FW in the next patch. Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05net: axienet: add coalesce timer ethtool configurationRobert Hancock
Add the ability to configure the RX/TX coalesce timer with ethtool. Change default setting to scale with the clock rate rather than being a fixed number of clock cycles. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05net: axienet: reduce default RX interrupt threshold to 1Robert Hancock
Now that NAPI has been implemented, the hardware interrupt mitigation mechanism is not needed to avoid excessive interrupt load in most cases. Reduce the default RX interrupt threshold to 1 to reduce introduced latency. This can be increased with ethtool if desired if some applications still want to reduce interrupts. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05net: axienet: implement NAPI and GRO receiveRobert Hancock
Implement NAPI and GRO receive. In addition to better performance, this also avoids handling RX packets in hard IRQ context, which reduces the IRQ latency impact to other devices. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05net: axienet: don't set IRQ timer when IRQ delay not usedRobert Hancock
When the RX or TX coalesce count is set to 1, there's no point in setting the delay timer value since an interrupt will already be raised on every packet, and the delay interrupt just causes extra pointless interrupts. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05net: axienet: Clean up DMA start/stop and error handlingRobert Hancock
Simplify the DMA error handling process, and remove some duplicated code between the DMA error handling and the stop function. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2026-09-08 10:50:21 +0000