summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2022-06-02stmmac: intel: Add RPL-P PCI IDMichael Sit Wei Hong
Add PCI ID for Ethernet TSN Controller on RPL-P. Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com> Link: https://lore.kernel.org/r/20220602073507.3955721-1-michael.wei.hong.sit@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-02net: stmmac: use dev_err_probe() for reporting mdio bus registration failureRasmus Villemoes
I have a board where these two lines are always printed during boot: imx-dwmac 30bf0000.ethernet: Cannot register the MDIO bus imx-dwmac 30bf0000.ethernet: stmmac_dvr_probe: MDIO bus (id: 1) registration failed It's perfectly fine, and the device is successfully (and silently, as far as the console goes) probed later. Use dev_err_probe() instead, which will demote these messages to debug level (thus removing the alarming messages from the console) when the error is -EPROBE_DEFER, and also has the advantage of including the error code if/when it happens to be something other than -EPROBE_DEFER. While here, add the missing \n to one of the format strings. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/r/20220602074840.1143360-1-linux@rasmusvillemoes.dk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-02ice: fix access-beyond-end in the switch codeAlexander Lobakin
Global `-Warray-bounds` enablement revealed some problems, one of which is the way we define and use AQC rules messages. In fact, they have a shared header, followed by the actual message, which can be of one of several different formats. So it is straightforward enough to define that header as a separate struct and then embed it into message structures as needed, but currently all the formats reside in one union coupled with the header. Then, the code allocates only the memory needed for a particular message format, leaving the union potentially incomplete. There are no actual reads or writes beyond the end of an allocated chunk, but at the same time, the whole implementation is fragile and backed by an equilibrium rather than strong type and memory checks. Define the structures the other way around: one for the common header and the rest for the actual formats with the header embedded. There are no places where several union members would be used at the same time anyway. This allows to use proper struct_size() and let the compiler know what is going to be done. Finally, unsilence `-Warray-bounds` back for ice_switch.c. Other little things worth mentioning: * &ice_sw_rule_vsi_list_query is not used anywhere, remove it. It's weird anyway to talk to hardware with purely kernel types (bitmaps); * expand the ICE_SW_RULE_*_SIZE() macros to pass a structure variable name to struct_size() to let it do strict typechecking; * rename ice_sw_rule_lkup_rx_tx::hdr to ::hdr_data to keep ::hdr for the header structure to have the same name for it constistenly everywhere; * drop the duplicate of %ICE_SW_RULE_RX_TX_NO_HDR_SIZE residing in ice_switch.h. Fixes: 9daf8208dd4d ("ice: Add support for switch filter programming") Fixes: 66486d8943ba ("ice: replace single-element array used for C struct hack") Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Acked-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220601105924.2841410-1-alexandr.lobakin@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-02nfp: remove padding in nfp_nfdk_tx_descFei Qin
NFDK firmware supports 48-bit dma addressing and parses 16 high bits of dma addresses. In nfp_nfdk_tx_desc, dma related structure and tso related structure are union. When "mss" be filled with nonzero value due to enable tso, the memory used by "padding" may be also filled. Then, firmware may parse wrong dma addresses which causes TX watchdog timeout problem. This patch removes padding and unifies the dma_addr_hi bits with the one in firmware. nfp_nfdk_tx_desc_set_dma_addr is also added to match this change. Fixes: c10d12e3dce8 ("nfp: add support for NFDK data path") Signed-off-by: Fei Qin <fei.qin@corigine.com> Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220601083449.50556-1-simon.horman@corigine.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-01net: usb: qmi_wwan: Add support for Cinterion MV31 with new baselineSlark Xiao
Adding support for Cinterion device MV31 with Qualcomm new baseline. Use different PIDs to separate it from previous base line products. All interfaces settings keep same as previous. T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00b9 Rev=04.14 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00B9 USB Mobile Broadband S: SerialNumber=90418e79 C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option Signed-off-by: Slark Xiao <slark_xiao@163.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20220601040531.6016-1-slark_xiao@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-01Merge tag 'mlx5-fixes-2022-05-31' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2022-05-31 This series provides bug fixes to mlx5 driver. Please pull and let me know if there is any problem. * tag 'mlx5-fixes-2022-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: Fix mlx5_get_next_dev() peer device matching net/mlx5e: Update netdev features after changing XDP state net/mlx5: correct ECE offset in query qp output net/mlx5e: Disable softirq in mlx5e_activate_rq to avoid race condition net/mlx5: CT: Fix header-rewrite re-use for tupels net/mlx5e: TC NIC mode, fix tc chains miss table net/mlx5: Don't use already freed action pointer ==================== Link: https://lore.kernel.org/r/20220531205447.99236-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-01sfc/siena: fix wrong tx channel offset with efx_separate_tx_channelsÍñigo Huguet
tx_channel_offset is calculated in efx_allocate_msix_channels, but it is also calculated again in efx_set_channels because it was originally done there, and when efx_allocate_msix_channels was introduced it was forgotten to be removed from efx_set_channels. Moreover, the old calculation is wrong when using efx_separate_tx_channels because now we can have XDP channels after the TX channels, so n_channels - n_tx_channels doesn't point to the first TX channel. Remove the old calculation from efx_set_channels, and add the initialization of this variable if MSI or legacy interrupts are used, next to the initialization of the rest of the related variables, where it was missing. This has been already done for sfc, do it also for sfc_siena. Fixes: 3990a8fffbda ("sfc: allocate channels for XDP tx queues") Reported-by: Tianhao Zhao <tizhao@redhat.com> Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-01sfc/siena: fix considering that all channels have TX queuesMartin Habets
Normally, all channels have RX and TX queues, but this is not true if modparam efx_separate_tx_channels=1 is used. In that cases, some channels only have RX queues and others only TX queues (or more preciselly, they have them allocated, but not initialized). Fix efx_channel_has_tx_queues to return the correct value for this case too. This has been already done for sfc, do it also for sfc_siena. Messages shown at probe time before the fix: sfc 0000:03:00.0 ens6f0np0: MC command 0x82 inlen 544 failed rc=-22 (raw=0) arg=0 ------------[ cut here ]------------ netdevice: ens6f0np0: failed to initialise TXQ -1 WARNING: CPU: 1 PID: 626 at drivers/net/ethernet/sfc/ef10.c:2393 efx_ef10_tx_init+0x201/0x300 [sfc] [...] stripped RIP: 0010:efx_ef10_tx_init+0x201/0x300 [sfc] [...] stripped Call Trace: efx_init_tx_queue+0xaa/0xf0 [sfc] efx_start_channels+0x49/0x120 [sfc] efx_start_all+0x1f8/0x430 [sfc] efx_net_open+0x5a/0xe0 [sfc] __dev_open+0xd0/0x190 __dev_change_flags+0x1b3/0x220 dev_change_flags+0x21/0x60 [...] stripped Messages shown at remove time before the fix: sfc 0000:03:00.0 ens6f0np0: failed to flush 10 queues sfc 0000:03:00.0 ens6f0np0: failed to flush queues Fixes: 8700aff08984 ("sfc: fix channel allocation with brute force") Reported-by: Tianhao Zhao <tizhao@redhat.com> Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com> Tested-by: Íñigo Huguet <ihuguet@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-01Merge tag 'wireless-2022-06-01' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Kalle Valo says: ==================== wireless fixes for v5.19 First set of fixes for v5.19. Build fixes for iwlwifi and libertas, a scheduling while atomic fix for rtw88 and use-after-free fix for mac80211. * tag 'wireless-2022-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: mac80211: fix use-after-free in chanctx code wifi: rtw88: add a work to correct atomic scheduling warning of ::set_tim wifi: iwlwifi: pcie: rename CAUSE macro wifi: libertas: use variable-size data in assoc req/resp cmd ==================== Link: https://lore.kernel.org/r/20220601110741.90B28C385A5@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-01Merge tag 'vfio-v5.19-rc1' of https://github.com/awilliam/linux-vfioLinus Torvalds
Pull vfio updates from Alex Williamson: - Improvements to mlx5 vfio-pci variant driver, including support for parallel migration per PF (Yishai Hadas) - Remove redundant iommu_present() check (Robin Murphy) - Ongoing refactoring to consolidate the VFIO driver facing API to use vfio_device (Jason Gunthorpe) - Use drvdata to store vfio_device among all vfio-pci and variant drivers (Jason Gunthorpe) - Remove redundant code now that IOMMU core manages group DMA ownership (Jason Gunthorpe) - Remove vfio_group from external API handling struct file ownership (Jason Gunthorpe) - Correct typo in uapi comments (Thomas Huth) - Fix coccicheck detected deadlock (Wan Jiabing) - Use rwsem to remove races and simplify code around container and kvm association to groups (Jason Gunthorpe) - Harden access to devices in low power states and use runtime PM to enable d3cold support for unused devices (Abhishek Sahu) - Fix dma_owner handling of fake IOMMU groups (Jason Gunthorpe) - Set driver_managed_dma on vfio-pci variant drivers (Jason Gunthorpe) - Pass KVM pointer directly rather than via notifier (Matthew Rosato) * tag 'vfio-v5.19-rc1' of https://github.com/awilliam/linux-vfio: (38 commits) vfio: remove VFIO_GROUP_NOTIFY_SET_KVM vfio/pci: Add driver_managed_dma to the new vfio_pci drivers vfio: Do not manipulate iommu dma_owner for fake iommu groups vfio/pci: Move the unused device into low power state with runtime PM vfio/pci: Virtualize PME related registers bits and initialize to zero vfio/pci: Change the PF power state to D0 before enabling VFs vfio/pci: Invalidate mmaps and block the access in D3hot power state vfio: Change struct vfio_group::container_users to a non-atomic int vfio: Simplify the life cycle of the group FD vfio: Fully lock struct vfio_group::container vfio: Split up vfio_group_get_device_fd() vfio: Change struct vfio_group::opened from an atomic to bool vfio: Add missing locking for struct vfio_group::kvm kvm/vfio: Fix potential deadlock problem in vfio include/uapi/linux/vfio.h: Fix trivial typo - _IORW should be _IOWR instead vfio/pci: Use the struct file as the handle not the vfio_group kvm/vfio: Remove vfio_group from kvm vfio: Change vfio_group_set_kvm() to vfio_file_set_kvm() vfio: Change vfio_external_check_extension() to vfio_file_enforced_coherent() vfio: Remove vfio_external_group_match_file() ...
2022-06-01macsec: fix UAF bug for real_devZiyang Xuan
Create a new macsec device but not get reference to real_dev. That can not ensure that real_dev is freed after macsec. That will trigger the UAF bug for real_dev as following: ================================================================== BUG: KASAN: use-after-free in macsec_get_iflink+0x5f/0x70 drivers/net/macsec.c:3662 Call Trace: ... macsec_get_iflink+0x5f/0x70 drivers/net/macsec.c:3662 dev_get_iflink+0x73/0xe0 net/core/dev.c:637 default_operstate net/core/link_watch.c:42 [inline] rfc2863_policy+0x233/0x2d0 net/core/link_watch.c:54 linkwatch_do_dev+0x2a/0x150 net/core/link_watch.c:161 Allocated by task 22209: ... alloc_netdev_mqs+0x98/0x1100 net/core/dev.c:10549 rtnl_create_link+0x9d7/0xc00 net/core/rtnetlink.c:3235 veth_newlink+0x20e/0xa90 drivers/net/veth.c:1748 Freed by task 8: ... kfree+0xd6/0x4d0 mm/slub.c:4552 kvfree+0x42/0x50 mm/util.c:615 device_release+0x9f/0x240 drivers/base/core.c:2229 kobject_cleanup lib/kobject.c:673 [inline] kobject_release lib/kobject.c:704 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x1c8/0x540 lib/kobject.c:721 netdev_run_todo+0x72e/0x10b0 net/core/dev.c:10327 After commit faab39f63c1f ("net: allow out-of-order netdev unregistration") and commit e5f80fcf869a ("ipv6: give an IPv6 dev to blackhole_netdev"), we can add dev_hold_track() in macsec_dev_init() and dev_put_track() in macsec_free_netdev() to fix the problem. Fixes: 2bce1ebed17d ("macsec: fix refcnt leak in module exit routine") Reported-by: syzbot+d0e94b65ac259c29ce7a@syzkaller.appspotmail.com Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Link: https://lore.kernel.org/r/20220531074500.1272846-1-william.xuanziyang@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-01octeontx2-af: fix error code in is_valid_offset()Dan Carpenter
The is_valid_offset() function returns success/true if the call to validate_and_get_cpt_blkaddr() fails. Fixes: ecad2ce8c48f ("octeontx2-af: cn10k: Add mailbox to configure reassembly timeout") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YpXDrTPb8qV01JSP@kili Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-01bonding: guard ns_targets by CONFIG_IPV6Hangbin Liu
Guard ns_targets in struct bond_params by CONFIG_IPV6, which could save 256 bytes if IPv6 not configed. Also add this protection for function bond_is_ip6_target_ok() and bond_get_targets_ip6(). Remove the IS_ENABLED() check for bond_opts[] as this will make BOND_OPT_NS_TARGETS uninitialized if CONFIG_IPV6 not enabled. Add a dummy bond_option_ns_ip6_targets_set() for this situation. Fixes: 4e24be018eb9 ("bonding: add new parameter ns_targets") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Jonathan Toppins <jtoppins@redhat.com> Link: https://lore.kernel.org/r/20220531063727.224043-1-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-31net/mlx5: Fix mlx5_get_next_dev() peer device matchingSaeed Mahameed
In some use-cases, mlx5 instances will need to search for their peer device (the other port on the same HCA). For that, mlx5 device matching mechanism relied on auxiliary_find_device() to search, and used a bad matching callback function. This approach has two issues: 1) next_phys_dev() the matching function, assumed all devices are of the type mlx5_adev (mlx5 auxiliary device) which is wrong and could lead to crashes, this worked for a while, since only lately other drivers started registering auxiliary devices. 2) using the auxiliary class bus (auxiliary_find_device) to search for mlx5_core_dev devices, who are actually PCIe device instances, is wrong. This works since mlx5_core always has at least one mlx5_adev instance hanging around in the aux bus. As suggested by others we can fix 1. by comparing device names prefixes if they have the string "mlx5_core" in them, which is not a best practice ! but even with that fixed, still 2. needs fixing, we are trying to match pcie device peers so we should look in the right bus (pci bus), hence this fix. The fix: 1) search the pci bus for mlx5 peer devices, instead of the aux bus 2) to validated devices are the same type "mlx5_core_dev" compare if they have the same driver, which is bulletproof. This wouldn't have worked with the aux bus since the various mlx5 aux device types don't share the same driver, even if they share the same device wrapper struct (mlx5_adev) "which helped to find the parent device" Fixes: a925b5e309c9 ("net/mlx5: Register mlx5 devices to auxiliary virtual bus") Reported-by: Alexander Lobakin <alexandr.lobakin@intel.com> Reported-by: Maher Sanalla <msanalla@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
2022-05-31net/mlx5e: Update netdev features after changing XDP stateMaxim Mikityanskiy
Some features (LRO, HW GRO) conflict with XDP. If there is an attempt to enable such features while XDP is active, they will be set to `off [requested on]`. In order to activate these features after XDP is turned off, the driver needs to call netdev_update_features(). This commit adds this missing call after XDP state changes. Fixes: cf6e34c8c22f ("net/mlx5e: Properly block LRO when XDP is enabled") Fixes: b0617e7b3500 ("net/mlx5e: Properly block HW GRO when XDP is enabled") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-31net/mlx5e: Disable softirq in mlx5e_activate_rq to avoid race conditionMaxim Mikityanskiy
When the driver activates the channels, it assumes NAPI isn't running yet. mlx5e_activate_rq posts a NOP WQE to ICOSQ to trigger a hardware interrupt and start NAPI, which will run mlx5e_alloc_rx_mpwqe and post UMR WQEs to ICOSQ to be able to receive packets with striding RQ. Unfortunately, a race condition is possible if NAPI is triggered by something else (for example, TX) at a bad timing, before mlx5e_activate_rq finishes. In this case, mlx5e_alloc_rx_mpwqe may post UMR WQEs to ICOSQ, and with the bad timing, the wqe_info of the first UMR may be overwritten by the wqe_info of the NOP posted by mlx5e_activate_rq. The consequence is that icosq->db.wqe_info[0].num_wqebbs will be changed from MLX5E_UMR_WQEBBS to 1, disrupting the integrity of the array-based linked list in wqe_info[]. mlx5e_poll_ico_cq will hang in an infinite loop after processing wqe_info[0], because after the corruption, the next item to be processed will be wqe_info[1], which is filled with zeros, and `sqcc += wi->num_wqebbs` will never move further. This commit fixes this race condition by using async_icosq to post the NOP and trigger the interrupt. async_icosq is always protected with a spinlock, eliminating the race condition. Fixes: bc77b240b3c5 ("net/mlx5e: Add fragmented memory support for RX multi packet WQE") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reported-by: Karsten Nielsen <karsten@foo-bar.dk> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-31net/mlx5: CT: Fix header-rewrite re-use for tupelsPaul Blakey
Tuple entries that don't have nat configured for them which are added to the ct nat table will always create a new modify header, as we don't check for possible re-use on them. The same for tuples that have nat configured for them but are added to ct table. Fix the above by only avoiding wasteful re-use lookup for actually natted entries in ct nat table. Fixes: 7fac5c2eced3 ("net/mlx5: CT: Avoid reusing modify header context for natted entries") Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Ariel Levkovich <lariel@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-31net/mlx5e: TC NIC mode, fix tc chains miss tableMaor Dickman
The cited commit changed promisc table to be created on demand with the highest priority in the NIC table replacing the vlan table, this caused tc NIC tables miss flow to skip the prmoisc table because it use vlan table as miss table. OVS offload in NIC mode use promisc by default so any unicast packet which will be handled by tc NIC tables miss flow will skip the promisc rule and will be dropped. Fix this by adding new empty table in new tc level with low priority and point the nic tc chain miss to it, the new table is managed so it will point to vlan table if promisc is disabled and to promisc table if enabled. Fixes: 1c46d7409f30 ("net/mlx5e: Optimize promiscuous mode") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Ariel Levkovich <lariel@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-31net/mlx5: Don't use already freed action pointerLeon Romanovsky
The call to mlx5dr_action_destroy() releases "action" memory. That pointer is set to miss_action later and generates the following smatch error: drivers/net/ethernet/mellanox/mlx5/core/steering/fs_dr.c:53 set_miss_action() warn: 'action' was already freed. Make sure that the pointer is always valid by setting NULL after destroy. Fixes: 6a48faeeca10 ("net/mlx5: Add direct rule fs_cmd implementation") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-31xen/netback: fix incorrect usage of RING_HAS_UNCONSUMED_REQUESTS()Juergen Gross
Commit 6fac592cca60 ("xen: update ring.h") missed to fix one use case of RING_HAS_UNCONSUMED_REQUESTS(). Reported-by: Jan Beulich <jbeulich@suse.com> Fixes: 6fac592cca60 ("xen: update ring.h") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Acked-by: Wei Liu <wei.liu@kernel.org> Link: https://lore.kernel.org/r/20220530113459.20124-1-jgross@suse.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-31bonding: show NS IPv6 targets in proc master infoHangbin Liu
When adding bond new parameter ns_targets. I forgot to print this in bond master proc info. After updating, the bond master info will look like: ARP IP target/s (n.n.n.n form): 192.168.1.254 NS IPv6 target/s (XX::XX form): 2022::1, 2022::2 Fixes: 4e24be018eb9 ("bonding: add new parameter ns_targets") Reported-by: Li Liang <liali@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20220530062639.37179-1-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-30net: phy: at803x: disable WOL at probeViorel Suman
Before 7beecaf7d507b ("net: phy: at803x: improve the WOL feature") patch "at803x_get_wol" implementation used AT803X_INTR_ENABLE_WOL value to set WAKE_MAGIC flag, and now AT803X_WOL_EN value is used for the same purpose. The problem here is that the values of these two bits are different after hardware reset: AT803X_INTR_ENABLE_WOL=0 after hardware reset, but AT803X_WOL_EN=1. So now, if called right after boot, "at803x_get_wol" will set WAKE_MAGIC flag, even if WOL function is not enabled by calling "at803x_set_wol" function. The patch disables WOL function on probe thus the behavior is consistent. Fixes: 7beecaf7d507b ("net: phy: at803x: improve the WOL feature") Signed-off-by: Viorel Suman <viorel.suman@nxp.com> Link: https://lore.kernel.org/r/20220527084935.235274-1-viorel.suman@oss.nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-30ath10k: fix regdomain info of iw reg set/getWen Gong
When wlan load, firmware report the reg code with 0x6C for QCA6174, it is world reg which checked by ath_is_world_regd(), then the reg will be save into reg_world_copy of ath_common in ath_regd_init(). Later the regulatory of ath_common is updated to another country code such as "US" in ath_reg_notifier_apply() by below call stack. After that, regulatory_hint() is called in ath10k_mac_register() and it lead "iw reg get" show two regdomain info as below. global country US: DFS-FCC (2400 - 2472 @ 40), (N/A, 30), (N/A) (5150 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW (5250 - 5350 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW (5470 - 5730 @ 160), (N/A, 23), (0 ms), DFS (5730 - 5850 @ 80), (N/A, 30), (N/A) (57240 - 71000 @ 2160), (N/A, 40), (N/A) phy#0 country US: DFS-FCC (2400 - 2472 @ 40), (N/A, 30), (N/A) (5150 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW (5250 - 5350 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW (5470 - 5730 @ 160), (N/A, 23), (0 ms), DFS (5730 - 5850 @ 80), (N/A, 30), (N/A) (57240 - 71000 @ 2160), (N/A, 40), (N/A) [ 4255.704975] Call Trace: [ 4255.704983] ath_reg_notifier_apply+0xa6/0xc5 [ath] [ 4255.704991] ath10k_reg_notifier+0x2f/0xd2 [ath10k_core] [ 4255.705010] wiphy_regulatory_register+0x5f/0x69 [cfg80211] [ 4255.705020] wiphy_register+0x459/0x8f0 [cfg80211] [ 4255.705042] ? ieee80211_register_hw+0x3a6/0x7d1 [mac80211] [ 4255.705049] ? __kmalloc+0xf4/0x218 [ 4255.705058] ? ieee80211_register_hw+0x3a6/0x7d1 [mac80211] [ 4255.705066] ? ath10k_mac_register+0x70/0xaab [ath10k_core] [ 4255.705075] ieee80211_register_hw+0x51a/0x7d1 [mac80211] [ 4255.705084] ath10k_mac_register+0x8b4/0xaab [ath10k_core] [ 4255.705094] ath10k_core_register_work+0xa5e/0xb45 [ath10k_core] [ 4255.705100] ? __schedule+0x61f/0x7d3 [ 4255.705105] process_one_work+0x1b7/0x392 [ 4255.705109] worker_thread+0x271/0x35d [ 4255.705112] ? pr_cont_work+0x58/0x58 [ 4255.705116] kthread+0x13f/0x147 [ 4255.705119] ? pr_cont_work+0x58/0x58 [ 4255.705123] ? kthread_destroy_worker+0x62/0x62 [ 4255.705126] ret_from_fork+0x22/0x40 At this moment, the two regdomain info is same, when run "iw reg set KR", the global regdomain info changed to KR, but the regdomain of phy#0 does not change again. It leads inconsistent values between global and phy#0 as below. global country KR: DFS-JP (2402 - 2482 @ 40), (N/A, 13), (N/A) (5170 - 5250 @ 80), (N/A, 20), (N/A), AUTO-BW (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, AUTO-BW (5490 - 5710 @ 160), (N/A, 30), (0 ms), DFS (5735 - 5835 @ 80), (N/A, 30), (N/A) (57000 - 66000 @ 2160), (N/A, 43), (N/A) phy#0 country US: DFS-FCC (2400 - 2472 @ 40), (N/A, 30), (N/A) (5150 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW (5250 - 5350 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW (5470 - 5730 @ 160), (N/A, 23), (0 ms), DFS (5730 - 5850 @ 80), (N/A, 30), (N/A) (57240 - 71000 @ 2160), (N/A, 40), (N/A) The initial reg code is 0x6C which saved in reg_world_copy of ath_common, and the code US is updated from cfg80211 later, so ath10k should also check the initial reg code before regulatory_hint(). After this fix, regdomain info is same between "iw reg get" and "iw reg set xx", it does not have the regdomain info of phy#0 again. global country KR: DFS-JP (2402 - 2482 @ 40), (N/A, 13), (N/A) (5170 - 5250 @ 80), (N/A, 20), (N/A), AUTO-BW (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, AUTO-BW (5490 - 5710 @ 160), (N/A, 30), (0 ms), DFS (5735 - 5835 @ 80), (N/A, 30), (N/A) (57000 - 66000 @ 2160), (N/A, 43), (N/A) This does not effect the channel list and power which ath10k used. When the country code for regulatory_hint() in ath10k_mac_register() is same with the global country code, then reg_set_rd_driver() of cfg80211 called from crda which return -EALREADY to set_regdom() and then update_all_wiphy_regulatory() will not be called while wlan load. When run "iw reg set xx", reg_get_regdomain() which used by function handle_channel() in net/wirelss/reg.c always use the regdomain returned by get_cfg80211_regdom() because the initiator of last regulatory_request is NL80211_REGDOM_SET_BY_USER, get_cfg80211_regdom() is the global regdomain, then all the ieee80211_channel info is updated in handle_channel() with the global regdomain. Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049 Tested-on: QCA9984 hw1.0 PCI 10.4-3.6-00104 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220525132247.23459-1-quic_wgong@quicinc.com
2022-05-30ath11k: support avg signal in station dumpThiraviyam Mariyappan
Currently mac80211 doesn't calculate average signal when RSS(Receive side scaling) is enabled from the driver, so average signal isn't printed in the station dump. To address this issue, calculate the average signal from RSSI within driver and display in the station dump. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1 Signed-off-by: Thiraviyam Mariyappan <quic_tmariyap@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/1652965061-30457-1-git-send-email-quic_tmariyap@quicinc.com
2022-05-30ath11k: fix IRQ affinity warning on shutdownJohan Hovold
Make sure to clear the IRQ affinity hint also on shutdown to avoid triggering a WARN_ON_ONCE() in __free_irq() when stopping MHI while using a single MSI vector. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Fixes: e94b07493da3 ("ath11k: Set IRQ affinity to CPU0 in case of one MSI vector") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220523143258.24818-1-johan+linaro@kernel.org
2022-05-30ath6kl: fix typo in commentJulia Lawall
Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220521111145.81697-14-Julia.Lawall@inria.fr
2022-05-30ath11k: fix netdev open raceJohan Hovold
Make sure to allocate resources needed before registering the device. This specifically avoids having a racing open() trigger a BUG_ON() in mod_timer() when ath11k_mac_op_start() is called before the mon_reap_timer as been set up. I did not see this issue with next-20220310, but I hit it on every probe with next-20220511. Perhaps some timing changed in between. Here's the backtrace: [ 51.346947] kernel BUG at kernel/time/timer.c:990! [ 51.346958] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ... [ 51.578225] Call trace: [ 51.583293] __mod_timer+0x298/0x390 [ 51.589518] mod_timer+0x14/0x20 [ 51.595368] ath11k_mac_op_start+0x41c/0x4a0 [ath11k] [ 51.603165] drv_start+0x38/0x60 [mac80211] [ 51.610110] ieee80211_do_open+0x29c/0x7d0 [mac80211] [ 51.617945] ieee80211_open+0x60/0xb0 [mac80211] [ 51.625311] __dev_open+0x100/0x1c0 [ 51.631420] __dev_change_flags+0x194/0x210 [ 51.638214] dev_change_flags+0x24/0x70 [ 51.644646] do_setlink+0x228/0xdb0 [ 51.650723] __rtnl_newlink+0x460/0x830 [ 51.657162] rtnl_newlink+0x4c/0x80 [ 51.663229] rtnetlink_rcv_msg+0x124/0x390 [ 51.669917] netlink_rcv_skb+0x58/0x130 [ 51.676314] rtnetlink_rcv+0x18/0x30 [ 51.682460] netlink_unicast+0x250/0x310 [ 51.688960] netlink_sendmsg+0x19c/0x3e0 [ 51.695458] ____sys_sendmsg+0x220/0x290 [ 51.701938] ___sys_sendmsg+0x7c/0xc0 [ 51.708148] __sys_sendmsg+0x68/0xd0 [ 51.714254] __arm64_sys_sendmsg+0x28/0x40 [ 51.720900] invoke_syscall+0x48/0x120 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Fixes: 840c36fa727a ("ath11k: dp: stop rx pktlog before suspend") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220517103436.15867-1-johan+linaro@kernel.org
2022-05-30wifi: wilc1000: add IGTK supportAjay Singh
Add support to handle IGTK keys which are required for MFP to FW. Index ID 4 and 5 are used to store the IGTK key. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220524120606.9675-4-ajay.kathat@microchip.com
2022-05-30wifi: wilc1000: add WPA3 SAE supportAjay Singh
Enable SAE authentication for AP and STA mode. In STA mode, allow the driver to pass the auth frames which are received from firmware to userspace application(hostapd) so that SAE authentication is offloaded to userspace. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220524120606.9675-3-ajay.kathat@microchip.com
2022-05-30wifi: wilc1000: remove WEP security supportAjay Singh
Deprecated WEP security for WILC driver as well as in firmware from 15.6 FW release onwards. After WEP security removal, freeup some codespace which helped to add new features like WPA3 etc. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220524120606.9675-2-ajay.kathat@microchip.com
2022-05-30wifi: wilc1000: use correct sequence of RESET for chip Power-UP/DownAjay Singh
For power-up sequence, WILC expects RESET set to high 5ms after making chip_en(enable) so corrected chip power-up sequence by making RESET high. For Power-Down sequence, the correct sequence make RESET and CHIP_EN low without any extra delay. Fixes: ec031ac4792c ("wilc1000: Add reset/enable GPIO support to SPI driver") Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220524120606.9675-1-ajay.kathat@microchip.com
2022-05-30wifi: rtlwifi: fix error codes in rtl_debugfs_set_write_h2c()Dan Carpenter
If the copy_from_user() fails or the user gives invalid date then the correct thing to do is to return a negative error code. (Currently it returns success). I made a copy additional related cleanups: 1) There is no need to check "buffer" for NULL. That's handled by copy_from_user(). 2) The "h2c_len" variable cannot be negative because it is unsigned and because sscanf() does not return negative error codes. Fixes: 610247f46feb ("rtlwifi: Improve debugging by using debugfs") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/YoOLnDkHgVltyXK7@kili
2022-05-30wifi: rtw88: Fix Sparse warning for rtw8821c_hw_specLarry Finger
Sparse lists the following: CHECK drivers/net/wireless/realtek/rtw88/rtw8821c.c drivers/net/wireless/realtek/rtw88/rtw8821c.c:1880:22: warning: symbol 'rtw8821c_hw_spec' was not declared. Should it be static? The warning arises because the external declaration for rtw8821c_hw_spec occurs in rtw8821ce.h, which is not included in rtw8821c.h. That line is moved, and the now empty file rtw8821ce.h is deleted. Symbol 'rtw8821c_hw_spec' can be made constant. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220524153716.20450-1-Larry.Finger@lwfinger.net
2022-05-30wifi: rtw88: Fix Sparse warning for rtw8723d_hw_specLarry Finger
Sparse lists the following: CHECK drivers/net/wireless/realtek/rtw88/rtw8723d.c drivers/net/wireless/realtek/rtw88/rtw8723d.c:2704:22: warning: symbol 'rtw8723d_hw_spec' was not declared. Should it be static? The warning arises because the external declaration for rtw8723d_hw_spec occurs in rtw8723de.h, which is not included in rtw8723d.h. That line is moved, and the now empty file rtw8723de.h is deleted. Symbol 'rtw8723d_hw_spec' can be made constant. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220524153621.19027-4-Larry.Finger@lwfinger.net
2022-05-30wifi: rtw88: Fix Sparse warning for rtw8822c_hw_specLarry Finger
Sparse reports the following: CHECK drivers/net/wireless/realtek/rtw88/rtw8822c.c drivers/net/wireless/realtek/rtw88/rtw8822c.c:5313:22: warning: symbol 'rtw8822c_hw_spec' was not declared. Should it be static? The warning arises because the external declaration for rtw8822c_hw_spec occurs in rtw8822ce.h, which is not included in rtw8822c.h. That line is moved, and the now empty file rtw8822ce.h is deleted. Symbol 'rtw8822c_hw_spec' can be made constant. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220524153621.19027-3-Larry.Finger@lwfinger.net
2022-05-30wifi: rtw88: Fix sparse warning for rtw8822b_hw_specLarry Finger
Sparse lists the following for rtw88: CHECK drivers/net/wireless/realtek/rtw88/rtw8822b.c drivers/net/wireless/realtek/rtw88/rtw8822b.c:2500:22: warning: symbol 'rtw8822b_hw_spec' was not declared. Should it be static? The warning arises because the external declaration for rtw8822b_hw_spec occurs in rtw8822be.h, which is not included in rtw8822b.h. That line is moved, and the now empty file rtw8822be.h is deleted. Symbol 'rtw8822b_hw_spec' can be made constant. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220524153621.19027-2-Larry.Finger@lwfinger.net
2022-05-30rtw88: fix null vif pointer when hw_scan failsPo-Hao Huang
Add this check to avoid crash by dereferencing a null pointer. When hwscan fails due to no memory or dma failure, the scan flag in ieee80211_local is cleared. So mac80211 determine that it's not hw_scan then calls sw_scan_complete() with null vif, which is also freed during the fail. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220520081523.45987-1-pkshih@realtek.com
2022-05-30rtw89: sar: adjust and support SAR on 6GHz bandZong-Zhe Yang
Since SAR is more expected to follow U-NII bands to plan subbands, division of 6GHz band is quite different from defined enum of subbands which is used by PHY in most cases. It's hard and painful if we want to keep using the same enum on SAR. So, we introduce another enum for SAR subbands and adjust SAR flow to use it. Besides, since 6GHz SAR subbands won't be divided with edge alignment, some cases will span two SAR subbands. For these cases, we describe them within an array of rtw89_sar_span and take the smaller one between SAR settings of the two subbands. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220520071731.38563-6-pkshih@realtek.com
2022-05-30rtw89: 8852c: rfk: re-calibrate RX DCK once thermal changes a lotPing-Ke Shih
RX DCK is receiver DC calibration. To keep good RF performance, do this calibration again if the delta of thermal value from the last calibration is more than 8. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220520071731.38563-5-pkshih@realtek.com
2022-05-30rtw89: pci: handle hardware watchdog timeout interrupt statusPing-Ke Shih
This watchdog timeout status bit indicates hardware gets wrong, so run SER L2 flow that calls mac80211 to restart hardware. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220520071731.38563-4-pkshih@realtek.com
2022-05-30rtw89: fix null vif pointer when hw_scan failsPo Hao Huang
Add this check to avoid crash by dereferencing a null pointer. When hwscan fails due to no memory or dma failure, the scan flag in ieee80211_local is cleared. So mac80211 determine that it's not hw_scan then calls sw_scan_complete() with null vif, which is also freed during the fail. Signed-off-by: Po Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220520071731.38563-3-pkshih@realtek.com
2022-05-30rtw89: fix channel inconsistency during hw_scanPo Hao Huang
Previously channel maintained by driver could be different from the ones hardware actually is. Restore these variables back to prevent unexpected behavior. Signed-off-by: Po Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220520071731.38563-2-pkshih@realtek.com
2022-05-30wifi: rtw88: add a work to correct atomic scheduling warning of ::set_timPing-Ke Shih
The set_tim is supposed to be atomic, but we should download beacon context to firmware with a mutex lock. To avoid warning, do the thing in another work. BUG: scheduling while atomic: swapper/1/0/0x00000700 Modules linked in: CPU: 1 PID: 0 Comm: swapper/1 Tainted: G W 5.18.0-rc7-00703-g33b5ee09a0c1 #4 Hardware name: Pine64 RK3566 Quartz64-A Board (DT) Call trace: dump_backtrace.part.0+0xc4/0xd0 show_stack+0x14/0x60 dump_stack_lvl+0x60/0x78 dump_stack+0x14/0x2c __schedule_bug+0x5c/0x70 __schedule+0x5c4/0x630 schedule+0x44/0xb0 schedule_preempt_disabled+0xc/0x14 __mutex_lock.constprop.0+0x538/0x56c __mutex_lock_slowpath+0x10/0x20 mutex_lock+0x54/0x60 rtw_ops_set_tim+0x20/0x40 __sta_info_recalc_tim+0x150/0x250 sta_info_recalc_tim+0x10/0x20 invoke_tx_handlers_early+0x4e4/0x5c0 ieee80211_tx+0x78/0x110 ieee80211_xmit+0x94/0xc0 __ieee80211_subif_start_xmit+0x818/0xd20 ieee80211_subif_start_xmit+0x44/0x2d0 dev_hard_start_xmit+0xd0/0x150 __dev_queue_xmit+0x250/0xb30 dev_queue_xmit+0x10/0x20 br_dev_queue_push_xmit+0x94/0x174 br_forward_finish+0x90/0xa0 __br_forward+0xc0/0x13c br_forward+0x108/0x134 br_dev_xmit+0x1cc/0x3a4 dev_hard_start_xmit+0xd0/0x150 __dev_queue_xmit+0x250/0xb30 dev_queue_xmit+0x10/0x20 arp_xmit+0x6c/0x7c arp_send_dst+0x8c/0xc0 arp_solicit+0xd4/0x1e0 neigh_probe+0x58/0xa0 neigh_timer_handler+0x27c/0x380 call_timer_fn.constprop.0+0x20/0x80 __run_timers.part.0+0x230/0x280 run_timer_softirq+0x38/0x70 _stext+0x104/0x278 __irq_exit_rcu+0xa4/0xdc irq_exit_rcu+0xc/0x14 el1_interrupt+0x34/0x50 el1h_64_irq_handler+0x14/0x20 el1h_64_irq+0x64/0x68 arch_cpu_idle+0x14/0x20 do_idle+0x208/0x290 cpu_startup_entry+0x20/0x30 secondary_start_kernel+0x130/0x144 __secondary_switched+0x54/0x58 Fixes: f2217968ffda ("rtw88: Add update beacon flow for AP mode") Reported-by: Ondřej Jirman <megi@xff.cz> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Ondřej Jirman <megi@xff.cz> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220526051251.281905-1-pkshih@realtek.com
2022-05-30wifi: iwlwifi: pcie: rename CAUSE macroJohannes Berg
At least mips64 has ist own CAUSE macro, so rename ours to IWL_CAUSE to fix build issues. Reported-by: Jakub Kicinski <kuba@kernel.org> Fixes: c1918196427b ("iwlwifi: pcie: simplify MSI-X cause mapping") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220523220300.682be2029361.I283200b18da589a975a284073dca8ed001ee107a@changeid
2022-05-30wifi: libertas: use variable-size data in assoc req/resp cmdJohannes Berg
The firmware has a 512 limit here, but we use less, so gcc starts complaining about it: drivers/net/wireless/marvell/libertas/cfg.c:1198:63: warning: array subscript ‘struct cmd_ds_802_11_associate_response[0]’ is partly outside array bounds of ‘unsigned char[203]’ [-Warray-bounds] 1198 | "aid 0x%04x\n", status, le16_to_cpu(resp->statuscode), | ^~ Since we size the command and response buffer per our needs and not per the firmware maximum, change to a variable size data array and put the 512 only into a comment. In the end, that's actually what the code always wanted, and it simplifies the code that used to subtract the fixed size buffer size in two places. Reported-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Kalle Valo <kvalo@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220523180200.115fa27fbece.Ie66d874b047e7afad63900aa2df70f031711147e@changeid
2022-05-30wifi: cw1200: cleanup the code a bitBernard Zhao
Delete if NULL check before dev_kfree_skb call. This change is to cleanup the code a bit. Signed-off-by: Bernard Zhao <bernard@vivo.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220517014136.410450-1-bernard@vivo.com
2022-05-29sfc: fix wrong tx channel offset with efx_separate_tx_channelsÍñigo Huguet
tx_channel_offset is calculated in efx_allocate_msix_channels, but it is also calculated again in efx_set_channels because it was originally done there, and when efx_allocate_msix_channels was introduced it was forgotten to be removed from efx_set_channels. Moreover, the old calculation is wrong when using efx_separate_tx_channels because now we can have XDP channels after the TX channels, so n_channels - n_tx_channels doesn't point to the first TX channel. Remove the old calculation from efx_set_channels, and add the initialization of this variable if MSI or legacy interrupts are used, next to the initialization of the rest of the related variables, where it was missing. Fixes: 3990a8fffbda ("sfc: allocate channels for XDP tx queues") Reported-by: Tianhao Zhao <tizhao@redhat.com> Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-29sfc: fix considering that all channels have TX queuesMartin Habets
Normally, all channels have RX and TX queues, but this is not true if modparam efx_separate_tx_channels=1 is used. In that cases, some channels only have RX queues and others only TX queues (or more preciselly, they have them allocated, but not initialized). Fix efx_channel_has_tx_queues to return the correct value for this case too. Messages shown at probe time before the fix: sfc 0000:03:00.0 ens6f0np0: MC command 0x82 inlen 544 failed rc=-22 (raw=0) arg=0 ------------[ cut here ]------------ netdevice: ens6f0np0: failed to initialise TXQ -1 WARNING: CPU: 1 PID: 626 at drivers/net/ethernet/sfc/ef10.c:2393 efx_ef10_tx_init+0x201/0x300 [sfc] [...] stripped RIP: 0010:efx_ef10_tx_init+0x201/0x300 [sfc] [...] stripped Call Trace: efx_init_tx_queue+0xaa/0xf0 [sfc] efx_start_channels+0x49/0x120 [sfc] efx_start_all+0x1f8/0x430 [sfc] efx_net_open+0x5a/0xe0 [sfc] __dev_open+0xd0/0x190 __dev_change_flags+0x1b3/0x220 dev_change_flags+0x21/0x60 [...] stripped Messages shown at remove time before the fix: sfc 0000:03:00.0 ens6f0np0: failed to flush 10 queues sfc 0000:03:00.0 ens6f0np0: failed to flush queues Fixes: 8700aff08984 ("sfc: fix channel allocation with brute force") Reported-by: Tianhao Zhao <tizhao@redhat.com> Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com> Tested-by: Íñigo Huguet <ihuguet@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-28net: enetc: Use pci_release_region() to release some resourcesChristophe JAILLET
Some resources are allocated using pci_request_region(). It is more straightforward to release them with pci_release_region(). Fixes: 231ece36f50d ("enetc: Add mdio bus driver for the PCIe MDIO endpoint") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-28bonding: NS target should accept link local addressHangbin Liu
When setting bond NS target, we use bond_is_ip6_target_ok() to check if the address valid. The link local address was wrongly rejected in bond_changelink(), as most time the user just set the ARP/NS target to gateway, while the IPv6 gateway is always a link local address when user set up interface via SLAAC. So remove the link local addr check when setting bond NS target. Fixes: 129e3c1bab24 ("bonding: add new option ns_ip6_target") Reported-by: Li Liang <liali@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2026-09-07 15:02:22 +0000