summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2022-06-08Merge branch '10GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-06-07 This series contains updates to ixgbe driver only. Olivier Matz resolves an issue so that broadcast packets can still be received when VF removes promiscuous settings and removes setting of VLAN promiscuous, in promiscuous mode, to prevent a loop when VFs are bridged. * '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ixgbe: fix unexpected VLAN Rx in promisc mode on VF ixgbe: fix bcast packets Rx on VF after promisc removal ==================== Link: https://lore.kernel.org/r/20220607181538.748786-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-08Merge branch '40GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 40GbE Intel Wired LAN Driver Updates 2022-06-07 This series contains updates to i40e and iavf drivers. Mateusz adds implementation for setting VF VLAN pruning to allow user to specify visibility of VLAN tagged traffic to VFs for i40e. He also adds waiting for result from PF for setting MAC address in iavf. ==================== Link: https://lore.kernel.org/r/20220607175506.696671-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-08net: dsa: mv88e6xxx: correctly report serdes link failureRussell King (Oracle)
Phylink wants to know if the link has dropped since the last time state was retrieved, and the BMSR gives us that. Read the BMSR and use it when deciding the link state. Fill in the an_complete member as well for the emulated PHY state. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-08net: dsa: mv88e6xxx: fix BMSR error to be consistent with othersRussell King (Oracle)
Other errors accessing the registers in mv88e6352_serdes_pcs_get_state() print "PHY " before the register name, except for the BMSR. Make this consistent with the other error messages. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-08net: dsa: mv88e6xxx: use BMSR_ANEGCOMPLETE bit for filling an_completeMarek Behún
Commit ede359d8843a ("net: dsa: mv88e6xxx: Link in pcs_get_state() if AN is bypassed") added the ability to link if AN was bypassed, and added filling of state->an_complete field, but set it to true if AN was enabled in BMCR, not when AN was reported complete in BMSR. This was done because for some reason, when I wanted to use BMSR value to infer an_complete, I was looking at BMSR_ANEGCAPABLE bit (which was always 1), instead of BMSR_ANEGCOMPLETE bit. Use BMSR_ANEGCOMPLETE for filling state->an_complete. Fixes: ede359d8843a ("net: dsa: mv88e6xxx: Link in pcs_get_state() if AN is bypassed") Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-08net: altera: Fix refcount leak in altera_tse_mdio_createMiaoqian Lin
Every iteration of for_each_child_of_node() decrements the reference count of the previous node. When break from a for_each_child_of_node() loop, we need to explicitly call of_node_put() on the child node when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: bbd2190ce96d ("Altera TSE: Add main and header file for Altera Ethernet Driver") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220607041144.7553-1-linmq006@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-08net: ethernet: mtk_eth_soc: fix misuse of mem alloc interface ↵Chen Lin
netdev[napi]_alloc_frag When rx_flag == MTK_RX_FLAGS_HWLRO, rx_data_len = MTK_MAX_LRO_RX_LENGTH(4096 * 3) > PAGE_SIZE. netdev_alloc_frag is for alloction of page fragment only. Reference to other drivers and Documentation/vm/page_frags.rst Branch to use __get_free_pages when ring->frag_size > PAGE_SIZE. Signed-off-by: Chen Lin <chen45464546@163.com> Link: https://lore.kernel.org/r/1654692413-2598-1-git-send-email-chen45464546@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-08net/mlx5: fs, fail conflicting actionsMark Bloch
When combining two steering rules into one check not only do they share the same actions but those actions are also the same. This resolves an issue where when creating two different rules with the same match the actions are overwritten and one of the rules is deleted a FW syndrome can be seen in dmesg. mlx5_core 0000:03:00.0: mlx5_cmd_check:819:(pid 2105): DEALLOC_MODIFY_HEADER_CONTEXT(0x941) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x1ab444) Fixes: 0d235c3fabb7 ("net/mlx5: Add hash table to search FTEs in a flow-group") Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-06-08net/mlx5: Rearm the FW tracer after each tracer eventFeras Daoud
The current design does not arm the tracer if traces are available before the tracer string database is fully loaded, leading to an unfunctional tracer. This fix will rearm the tracer every time the FW triggers tracer event regardless of the tracer strings database status. Fixes: c71ad41ccb0c ("net/mlx5: FW tracer, events handling") Signed-off-by: Feras Daoud <ferasda@nvidia.com> Signed-off-by: Roy Novich <royno@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-06-08net/mlx5: E-Switch, pair only capable devicesMark Bloch
OFFLOADS paring using devcom is possible only on devices that support LAG. Filter based on lag capabilities. This fixes an issue where mlx5_get_next_phys_dev() was called without holding the interface lock. This issue was found when commit bc4c2f2e0179 ("net/mlx5: Lag, filter non compatible devices") added an assert that verifies the interface lock is held. WARNING: CPU: 9 PID: 1706 at drivers/net/ethernet/mellanox/mlx5/core/dev.c:642 mlx5_get_next_phys_dev+0xd2/0x100 [mlx5_core] Modules linked in: mlx5_vdpa vringh vhost_iotlb vdpa mlx5_ib mlx5_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_umad ib_ipoib ib_cm ib_uverbs ib_core overlay fuse [last unloaded: mlx5_core] CPU: 9 PID: 1706 Comm: devlink Not tainted 5.18.0-rc7+ #11 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5_get_next_phys_dev+0xd2/0x100 [mlx5_core] Code: 02 00 75 48 48 8b 85 80 04 00 00 5d c3 31 c0 5d c3 be ff ff ff ff 48 c7 c7 08 41 5b a0 e8 36 87 28 e3 85 c0 0f 85 6f ff ff ff <0f> 0b e9 68 ff ff ff 48 c7 c7 0c 91 cc 84 e8 cb 36 6f e1 e9 4d ff RSP: 0018:ffff88811bf47458 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88811b398000 RCX: 0000000000000001 RDX: 0000000080000000 RSI: ffffffffa05b4108 RDI: ffff88812daaaa78 RBP: ffff88812d050380 R08: 0000000000000001 R09: ffff88811d6b3437 R10: 0000000000000001 R11: 00000000fddd3581 R12: ffff88815238c000 R13: ffff88812d050380 R14: ffff8881018aa7e0 R15: ffff88811d6b3428 FS: 00007fc82e18ae80(0000) GS:ffff88842e080000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f9630d1b421 CR3: 0000000149802004 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> mlx5_esw_offloads_devcom_event+0x99/0x3b0 [mlx5_core] mlx5_devcom_send_event+0x167/0x1d0 [mlx5_core] esw_offloads_enable+0x1153/0x1500 [mlx5_core] ? mlx5_esw_offloads_controller_valid+0x170/0x170 [mlx5_core] ? wait_for_completion_io_timeout+0x20/0x20 ? mlx5_rescan_drivers_locked+0x318/0x810 [mlx5_core] mlx5_eswitch_enable_locked+0x586/0xc50 [mlx5_core] ? mlx5_eswitch_disable_pf_vf_vports+0x1d0/0x1d0 [mlx5_core] ? mlx5_esw_try_lock+0x1b/0xb0 [mlx5_core] ? mlx5_eswitch_enable+0x270/0x270 [mlx5_core] ? __debugfs_create_file+0x260/0x3e0 mlx5_devlink_eswitch_mode_set+0x27e/0x870 [mlx5_core] ? mutex_lock_io_nested+0x12c0/0x12c0 ? esw_offloads_disable+0x250/0x250 [mlx5_core] ? devlink_nl_cmd_trap_get_dumpit+0x470/0x470 ? rcu_read_lock_sched_held+0x3f/0x70 devlink_nl_cmd_eswitch_set_doit+0x217/0x620 Fixes: dd3fddb82780 ("net/mlx5: E-Switch, handle devcom events only for ports on the same device") Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-06-08net/mlx5e: CT: Fix cleanup of CT before cleanup of TC ct rulesPaul Blakey
CT cleanup assumes that all tc rules were deleted first, and so is free to delete the CT shared resources (e.g the dr_action fwd_action which is shared for all tuples). But currently for uplink, this is happens in reverse, causing the below trace. CT cleanup is called from: mlx5e_cleanup_rep_tx()->mlx5e_cleanup_uplink_rep_tx()-> mlx5e_rep_tc_cleanup()->mlx5e_tc_esw_cleanup()-> mlx5_tc_ct_clean() Only afterwards, tc cleanup is called from: mlx5e_cleanup_rep_tx()->mlx5e_tc_ht_cleanup() which would have deleted all the tc ct rules, and so delete all the offloaded tuples. Fix this reversing the order of init and on cleanup, which will result in tc cleanup then ct cleanup. [ 9443.593347] WARNING: CPU: 2 PID: 206774 at drivers/net/ethernet/mellanox/mlx5/core/steering/dr_action.c:1882 mlx5dr_action_destroy+0x188/0x1a0 [mlx5_core] [ 9443.593349] Modules linked in: act_ct nf_flow_table rdma_ucm(O) rdma_cm(O) iw_cm(O) ib_ipoib(O) ib_cm(O) ib_umad(O) mlx5_core(O-) mlxfw(O) mlxdevm(O) auxiliary(O) ib_uverbs(O) psample ib_core(O) mlx_compat(O) ip_gre gre ip_tunnel act_vlan bonding geneve esp6_offload esp6 esp4_offload esp4 act_tunnel_key vxlan ip6_udp_tunnel udp_tunnel act_mirred act_skbedit act_gact cls_flower sch_ingress nfnetlink_cttimeout nfnetlink xfrm_user xfrm_algo 8021q garp stp ipmi_devintf mrp ipmi_msghandler llc openvswitch nsh nf_conncount nf_nat mst_pciconf(O) dm_multipath sbsa_gwdt uio_pdrv_genirq uio mlxbf_pmc mlxbf_pka mlx_trio mlx_bootctl(O) bluefield_edac sch_fq_codel ip_tables ipv6 crc_ccitt btrfs zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor xor_neon raid6_pq raid1 raid0 crct10dif_ce i2c_mlxbf gpio_mlxbf2 mlxbf_gige aes_neon_bs aes_neon_blk [last unloaded: mlx5_ib] [ 9443.593419] CPU: 2 PID: 206774 Comm: modprobe Tainted: G O 5.4.0-1023.24.gc14613d-bluefield #1 [ 9443.593422] Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS BlueField:143ebaf Jan 11 2022 [ 9443.593424] pstate: 20000005 (nzCv daif -PAN -UAO) [ 9443.593489] pc : mlx5dr_action_destroy+0x188/0x1a0 [mlx5_core] [ 9443.593545] lr : mlx5_ct_fs_smfs_destroy+0x24/0x30 [mlx5_core] [ 9443.593546] sp : ffff8000135dbab0 [ 9443.593548] x29: ffff8000135dbab0 x28: ffff0003a6ab8e80 [ 9443.593550] x27: 0000000000000000 x26: ffff0003e07d7000 [ 9443.593552] x25: ffff800009609de0 x24: ffff000397fb2120 [ 9443.593554] x23: ffff0003975c0000 x22: 0000000000000000 [ 9443.593556] x21: ffff0003975f08c0 x20: ffff800009609de0 [ 9443.593558] x19: ffff0003c8a13380 x18: 0000000000000014 [ 9443.593560] x17: 0000000067f5f125 x16: 000000006529c620 [ 9443.593561] x15: 000000000000000b x14: 0000000000000000 [ 9443.593563] x13: 0000000000000002 x12: 0000000000000001 [ 9443.593565] x11: ffff800011108868 x10: 0000000000000000 [ 9443.593567] x9 : 0000000000000000 x8 : ffff8000117fb270 [ 9443.593569] x7 : ffff0003ebc01288 x6 : 0000000000000000 [ 9443.593571] x5 : ffff800009591ab8 x4 : fffffe000f6d9a20 [ 9443.593572] x3 : 0000000080040001 x2 : fffffe000f6d9a20 [ 9443.593574] x1 : ffff8000095901d8 x0 : 0000000000000025 [ 9443.593577] Call trace: [ 9443.593634] mlx5dr_action_destroy+0x188/0x1a0 [mlx5_core] [ 9443.593688] mlx5_ct_fs_smfs_destroy+0x24/0x30 [mlx5_core] [ 9443.593743] mlx5_tc_ct_clean+0x34/0xa8 [mlx5_core] [ 9443.593797] mlx5e_tc_esw_cleanup+0x58/0x88 [mlx5_core] [ 9443.593851] mlx5e_rep_tc_cleanup+0x24/0x30 [mlx5_core] [ 9443.593905] mlx5e_cleanup_rep_tx+0x6c/0x78 [mlx5_core] [ 9443.593959] mlx5e_detach_netdev+0x74/0x98 [mlx5_core] [ 9443.594013] mlx5e_netdev_change_profile+0x70/0x180 [mlx5_core] [ 9443.594067] mlx5e_netdev_attach_nic_profile+0x34/0x40 [mlx5_core] [ 9443.594122] mlx5e_vport_rep_unload+0x15c/0x1a8 [mlx5_core] [ 9443.594177] mlx5_eswitch_unregister_vport_reps+0x228/0x298 [mlx5_core] [ 9443.594231] mlx5e_rep_remove+0x2c/0x38 [mlx5_core] [ 9443.594236] auxiliary_bus_remove+0x30/0x50 [auxiliary] [ 9443.594246] device_release_driver_internal+0x108/0x1d0 [ 9443.594248] driver_detach+0x5c/0xe8 [ 9443.594250] bus_remove_driver+0x64/0xd8 [ 9443.594253] driver_unregister+0x38/0x60 [ 9443.594255] auxiliary_driver_unregister+0x24/0x38 [auxiliary] [ 9443.594311] mlx5e_rep_cleanup+0x20/0x38 [mlx5_core] [ 9443.594365] mlx5e_cleanup+0x18/0x30 [mlx5_core] [ 9443.594419] cleanup+0xc/0x20cc [mlx5_core] [ 9443.594424] __arm64_sys_delete_module+0x154/0x2b0 [ 9443.594429] el0_svc_common.constprop.0+0xf4/0x200 [ 9443.594432] el0_svc_handler+0x38/0xa8 [ 9443.594435] el0_svc+0x10/0x26c Fixes: d1a3138f7913 ("net/mlx5e: TC, Move flow hashtable to be per rep") Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-06-08Revert "net/mlx5e: Allow relaxed ordering over VFs"Saeed Mahameed
FW is not ready, fix was sent too soon. This reverts commit f05ec8d9d0d62367b6e1f2cb50d7d2a45e7747cf. Fixes: f05ec8d9d0d6 ("net/mlx5e: Allow relaxed ordering over VFs") Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-06-08au1000_eth: stop using virt_to_bus()Arnd Bergmann
The conversion to the dma-mapping API in linux-2.6.11 was incomplete and left a virt_to_bus() call around. There have been a number of fixes for DMA mapping API abuse in this driver, but this one always slipped through. Change it to just use the existing dma_addr_t pointer, and make it use the correct types throughout the driver to make it easier to understand the virtual vs dma address spaces. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Manuel Lauss <manuel.lauss@gmail.com> Link: https://lore.kernel.org/r/20220607090206.19830-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-08net: mdio: unexport __init-annotated mdio_bus_init()Masahiro Yamada
EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in linux-next builds. There are two ways to fix it: - Remove __init - Remove EXPORT_SYMBOL I chose the latter for this case because the only in-tree call-site, drivers/net/phy/phy_device.c is never compiled as modular. (CONFIG_PHYLIB is boolean) Fixes: 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-08nfp: Remove kernel.h when not neededChristophe JAILLET
When kernel.h is used in the headers it adds a lot into dependency hell, especially when there are circular dependencies are involved. Remove kernel.h when it is not needed. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220607125103.487801-1-simon.horman@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-08ice: Use correct order for the parameters of devm_kcalloc()Christophe JAILLET
We should have 'n', then 'size', not the opposite. This is harmless because the 2 values are just multiplied, but having the correct order silence a (unpublished yet) smatch warning. While at it use '*tun_seg' instead '*seg'. The both variable have the same type, so the result is the same, but it lokks more logical. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-08ice: remove u16 arithmetic in ice_gnssKarol Kolacinski
Change u16 to unsigned int where arithmetic occurs. Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-08ice: remove VLAN representor specific opsMichal Swiatkowski
In switchdev mode VF VLAN caps will not be set there is no need to have specific VLAN ops for representor that only returns not supported error. As VLAN configuration commands will be blocked, the VF driver can't disable VLAN stripping at initialization. It leads to the situation when VLAN stripping on VF VSI is on, but in kernel it is off. To prevent this, disable VLAN stripping in VSI initialization. It doesn't break other usecases, because it is set according to kernel settings. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-08ice: don't set VF VLAN caps in switchdevMichal Swiatkowski
In switchdev mode any VLAN manipulation from VF side isn't allowed. In order to prevent parsing VLAN commands don't set VF VLAN caps. This will result in removing VLAN specific opcodes from allowlist. If VF send any VLAN specific opcode PF driver will answer with not supported error. With this approach VF driver know that VLAN caps aren't supported so it shouldn't send VLAN specific opcodes. Thanks to that, some ugly errors will not show up in dmesg (ex. on creating VFs in switchdev mode there are errors about not supported VLAN insertion and stripping) Move setting VLAN caps to separate function, including switchdev mode specific code. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-08ath10k: fix recently introduced checkpatch warningKalle Valo
I updated my checkpatch and saw new warnings: drivers/net/wireless/ath/ath10k/qmi.c:593: Prefer strscpy over strlcpy - see: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ drivers/net/wireless/ath/ath10k/qmi.c:598: Prefer strscpy over strlcpy - see: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ drivers/net/wireless/ath/ath10k/htt_rx.c:3565: Integer promotion: Using 'h' in '%04hx' is unnecessary Compile tested only. Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220606142957.23721-1-kvalo@kernel.org
2022-06-08wifi: rtw89: support MULTI_BSSID and correct BSSID mask of H2CPing-Ke Shih
The BSSID mask of H2C is used to match BSSID of receiving packets. Normally, we set six bits BSSID mask to exactly match BSSID of packets sent by target AP. After we support multiple BSSID, it could connect a nontransmitted BSSID, so we can only match first five bytes of BSSID. That means we could possibly receive other AP's packets if only the last byte of BSSID is different from target AP. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220530112743.106857-1-pkshih@realtek.com
2022-06-08wifi: ray_cs: Drop useless status variable in parse_addr()Andy Shevchenko
The status variable assigned only once and used also only once. Replace it's usage by actual value. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220603164414.48436-2-andriy.shevchenko@linux.intel.com
2022-06-08wifi: ray_cs: Utilize strnlen() in parse_addr()Andy Shevchenko
Instead of doing simple operations and using an additional variable on stack, utilize strnlen() and reuse len variable. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220603164414.48436-1-andriy.shevchenko@linux.intel.com
2022-06-08wifi: rtw88: use %*ph to print small bufferAndy Shevchenko
Use %*ph format to print small buffer as hex string. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220603125648.46873-1-andriy.shevchenko@linux.intel.com
2022-06-07net: ethernet: mtk_eth_soc: enable rx cksum offload for MTK_NETSYS_V2Lorenzo Bianconi
Enable rx checksum offload for mt7986 chipset. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/c8699805c18f7fd38315fcb8da2787676d83a32c.1654544585.git.lorenzo@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-07net/mlx4_en: Fix wrong return value on ioctl EEPROM query failureGal Pressman
The ioctl EEPROM query wrongly returns success on read failures, fix that by returning the appropriate error code. Fixes: 7202da8b7f71 ("ethtool, net/mlx4_en: Cable info, get_module_info/eeprom ethtool support") Signed-off-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20220606115718.14233-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-07net: dsa: lantiq_gswip: Fix refcount leak in gswip_gphy_fw_listMiaoqian Lin
Every iteration of for_each_available_child_of_node() decrements the reference count of the previous node. when breaking early from a for_each_available_child_of_node() loop, we need to explicitly call of_node_put() on the gphy_fw_np. Add missing of_node_put() to avoid refcount leak. Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220605072335.11257-1-linmq006@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-07net: dsa: microchip: ksz8xxx: Replace kernel.h with the necessary inclusionsChristophe JAILLET
When kernel.h is used in the headers it adds a lot into dependency hell, especially when there are circular dependencies are involved. Replace kernel.h inclusion with the list of what is really being used. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/41d99ef8629e1db03d4f2662f5556611e0b94652.1654323308.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-07ixgbe: fix unexpected VLAN Rx in promisc mode on VFOlivier Matz
When the promiscuous mode is enabled on a VF, the IXGBE_VMOLR_VPE bit (VLAN Promiscuous Enable) is set. This means that the VF will receive packets whose VLAN is not the same than the VLAN of the VF. For instance, in this situation: ┌────────┐ ┌────────┐ ┌────────┐ │ │ │ │ │ │ │ │ │ │ │ │ │ VF0├────┤VF1 VF2├────┤VF3 │ │ │ │ │ │ │ └────────┘ └────────┘ └────────┘ VM1 VM2 VM3 vf 0: vlan 1000 vf 1: vlan 1000 vf 2: vlan 1001 vf 3: vlan 1001 If we tcpdump on VF3, we see all the packets, even those transmitted on vlan 1000. This behavior prevents to bridge VF1 and VF2 in VM2, because it will create a loop: packets transmitted on VF1 will be received by VF2 and vice-versa, and bridged again through the software bridge. This patch remove the activation of VLAN Promiscuous when a VF enables the promiscuous mode. However, the IXGBE_VMOLR_UPE bit (Unicast Promiscuous) is kept, so that a VF receives all packets that has the same VLAN, whatever the destination MAC address. Fixes: 8443c1a4b192 ("ixgbe, ixgbevf: Add new mbox API xcast mode") Cc: stable@vger.kernel.org Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-07ixgbe: fix bcast packets Rx on VF after promisc removalOlivier Matz
After a VF requested to remove the promiscuous flag on an interface, the broadcast packets are not received anymore. This breaks some protocols like ARP. In ixgbe_update_vf_xcast_mode(), we should keep the IXGBE_VMOLR_BAM bit (Broadcast Accept) on promiscuous removal. This flag is already set by default in ixgbe_set_vmolr() on VF reset. Fixes: 8443c1a4b192 ("ixgbe, ixgbevf: Add new mbox API xcast mode") Cc: stable@vger.kernel.org Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-07iavf: Add waiting for response from PF in set macMateusz Palczewski
Make iavf_set_mac synchronous by waiting for a response from a PF. Without this iavf_set_mac is always returning success even though set_mac can be rejected by a PF. This ensures that when set_mac exits netdev MAC is updated. This is needed for sending ARPs with correct MAC after changing VF's MAC. This is also needed by bonding module. Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-07i40e: Add VF VLAN pruningMateusz Palczewski
VFs by default are able to see all tagged traffic regardless of trust and VLAN filters configured. Add new private flag vf-vlan-pruning that allows changing of default VF behavior for tagged traffic. When the flag is turned on untrusted VF will only be able to receive untagged traffic or traffic with VLAN tags it has created interfaces for The flag is off by default and can only be changed if there are no VFs spawned on the PF. This flag will only be effective when no PVID is set on VF and VF is not trusted. Add new function that computes the correct VLAN ID for VF VLAN filters based on trust, PVID, vf-vlan-prune-disable flag and current VLAN ID. Testing Hints: Test 1: vf-vlan-pruning == off ============================== 1. Set the private flag > ethtool --set-priv-flag eth0 vf-vlan-pruning off (default setting) 2. Use scapy to send any VLAN tagged traffic and make sure the VF receives all VLAN tagged traffic that matches its destination MAC filters (unicast, multicast, and broadcast). Test 2: vf-vlan-pruning == on ============================== 1. Set the private flag > ethtool --set-priv-flag eth0 vf-vlan-pruning on 2. Use scapy to send any VLAN tagged traffic and make sure the VF does not receive any VLAN tagged traffic that matches its destination MAC filters (unicast, multicast, and broadcast). 3. Add a VLAN filter on the VF netdev > ip link add link eth0v0 name vlan10 type vlan id 10 4. Bring the VLAN netdev up > ip link set vlan10 up 4. Use scapy to send traffic with VLAN 10, VLAN 11 (anything not VLAN 10), and untagged traffic. Make sure the VF only receives VLAN 10 and untagged traffic when the link partner is sending. Test 3: vf-vlan-pruning == off && VF is in a port VLAN ============================== 1. Set the private flag > ethtool --set-priv-flag eth0 vf-vlan-pruning off (default setting) 2. Create a VF > echo 1 > sriov_numvfs 3. Put the VF in a port VLAN > ip link set eth0 vf 0 vlan 10 4. Use scapy to send traffic with VLAN 10 and VLAN 11 (anything not VLAN 10) and make sure the VF only receives untagged traffic when the link partner is sending VLAN 10 tagged traffic as the VLAN tag is expected to be stripped by HW for port VLANs and not visible to the VF. Test 4: Change vf-vlan-pruning while VFs are created ============================== echo 0 > sriov_numvfs ethtool --set-priv-flag eth0 vf-vlan-pruning off echo 1 > sriov_numvfs ethtool --set-priv-flag eth0 vf-vlan-pruning on (expect failure) Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-07stmmac: intel: Fix an error handling path in intel_eth_pci_probe()Christophe JAILLET
When the managed API is used, there is no need to explicitly call pci_free_irq_vectors(). This looks to be a left-over from the commit in the Fixes tag. Only the .remove() function had been updated. So remove this unused function call and update goto label accordingly. Fixes: 8accc467758e ("stmmac: intel: use managed PCI function on probe and resume") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> Link: https://lore.kernel.org/r/1ac9b6787b0db83b0095711882c55c77c8ea8da0.1654462241.git.christophe.jaillet@wanadoo.fr Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-07net: altera: Replace kernel.h with the necessary inclusionsChristophe JAILLET
When kernel.h is used in the headers it adds a lot into dependency hell, especially when there are circular dependencies are involved. Replace kernel.h inclusion with the list of what is really being used. While at it, move these includes below the include guard. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/18731e4f6430100d6500d6c4732ee028a729c085.1654325651.git.christophe.jaillet@wanadoo.fr Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-07WAN: Fix syntax errors in commentsXiang wangx
Delete the redundant word 'the'. Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com> Link: https://lore.kernel.org/r/20220604040917.8926-1-wangxiang@cdjrlc.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-06net: ethernet: bgmac: Fix refcount leak in bcma_mdio_mii_registerMiaoqian Lin
of_get_child_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: 55954f3bfdac ("net: ethernet: bgmac: move BCMA MDIO Phy code into a separate file") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220603133238.44114-1-linmq006@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-06amt: fix wrong type string definitionTaehee Yoo
amt message type definition starts from 1, not 0. But type_str[] starts from 0. So, it prints wrong type information. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-06amt: fix possible null-ptr-deref in amt_rcv()Taehee Yoo
When amt interface receives amt message, it tries to obtain amt private data from sock. If there is no amt private data, it frees an skb immediately. After kfree_skb(), it increases the rx_dropped stats. But in order to use rx_dropped, amt private data is needed. So, it makes amt_rcv() to do not increase rx_dropped stats when it can not obtain amt private data. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 1a1a0e80e005 ("amt: fix possible memory leak in amt_rcv()") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-06amt: fix wrong usage of pskb_may_pull()Taehee Yoo
It adds missing pskb_may_pull() in amt_update_handler() and amt_multicast_data_handler(). And it fixes wrong parameter of pskb_may_pull() in amt_advertisement_handler() and amt_membership_query_handler(). Reported-by: Jakub Kicinski <kuba@kernel.org> Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-06net: phy: dp83867: retrigger SGMII AN when link changeTan Tee Min
There is a limitation in TI DP83867 PHY device where SGMII AN is only triggered once after the device is booted up. Even after the PHY TPI is down and up again, SGMII AN is not triggered and hence no new in-band message from PHY to MAC side SGMII. This could cause an issue during power up, when PHY is up prior to MAC. At this condition, once MAC side SGMII is up, MAC side SGMII wouldn`t receive new in-band message from TI PHY with correct link status, speed and duplex info. As suggested by TI, implemented a SW solution here to retrigger SGMII Auto-Neg whenever there is a link change. v2: Add Fixes tag in commit message. Fixes: 2a10154abcb7 ("net: phy: dp83867: Add TI dp83867 phy") Cc: <stable@vger.kernel.org> # 5.4.x Signed-off-by: Sit, Michael Wei Hong <michael.wei.hong.sit@intel.com> Reviewed-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220526090347.128742-1-tee.min.tan@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-06ath11k: Fix warnings reported by checkpatchManikanta Pubbisetty
Fix warnings reported by checkpatch tool. Below are the errors fixed, drivers/net/wireless/ath/ath11k/hal_rx.c:760: 'recevied' may be misspelled - perhaps 'received? drivers/net/wireless/ath/ath11k/qmi.c:2232: Prefer strscpy over strlcpy drivers/net/wireless/ath/ath11k/qmi.c:2238: Prefer strscpy over strlcpy drivers/net/wireless/ath/ath11k/qmi.c:2662: Prefer strscpy over strlcpy drivers/net/wireless/ath/ath11k/mac.c:7836: 'atleast' may be misspelled - perhaps 'at least'? drivers/net/wireless/ath/ath11k/wmi.c:6566: 'succeded' may be misspelled - perhaps 'succeeded'? Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220602131350.29486-1-quic_mpubbise@quicinc.com
2022-06-06ath11k: Fix LDPC config in set_bitrate_mask hookManikanta Pubbisetty
Currently ar->ht_cap_info is not set anywhere in the code, this could result in LDPC config computed wrongly in the set_bitrate_mask() hook and eventually sending wrong config to the target. Fix this by checking the LDPC support from the band HT capabilities of the radio instead. Furthermore, it looks like firmwares running on the ath11k hardware do not set WMI_HT_CAP_LDPC for advertising the TX LDPC capability, WMI_HT_CAP_TX_LDPC is set instead and this should be checked for getting hardware's TX LDPC support. This is true for QCA6390, WCN6855 & WCN6750 hardware. Also, remove unused variables ht_cap_info & vht_cap_info from struct ath11k{}. Found this during code review. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220602124142.29909-1-quic_mpubbise@quicinc.com
2022-06-06ath11k: Avoid REO CMD failed prints during firmware recoveryManikanta Pubbisetty
Currently when firmware recovery is in progress, we do not queue REO commands to the firmware, instead -ESHUTDOWN will be returned to the caller leading to a failure print on the console. The REO command in the problem scenario is sent for all tids of a peer in which case we will have 16 failure prints on the console for a single peer. For an AP usecase, this count would be even higher in a worst case scenario. Since these commands are bound to fail during firmware recovery, it is better to avoid printing these failures and thereby avoid message flooding on the console. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Fixes: 8ee8d38ca472 ("ath11k: Fix crash during firmware recovery on reo cmd ring access") Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220602122929.18896-1-quic_mpubbise@quicinc.com
2022-06-06ath11k: Fix incorrect debug_mask mappingsManikanta Pubbisetty
Currently a couple of debug_mask entries are mapped to the same value, this could enable unintended driver logging. If enabling DP_TX logs was the intention, then this could also enable PCI logs flooding the dmesg buffer or vice versa. Fix this by correctly assigning the debug masks. Found during code review. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Fixes: aa2092a9bab3f ("ath11k: add raw mode and software crypto support") Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220602115621.15339-1-quic_mpubbise@quicinc.com
2022-06-06ath11k: fix missing skb drop on htc_tx_completion errorChristian 'Ansuel' Marangi
On htc_tx_completion error the skb is not dropped. This is wrong since the completion_handler logic expect the skb to be consumed anyway even when an error is triggered. Not freeing the skb on error is a memory leak since the skb won't be freed anywere else. Correctly free the packet on eid >= ATH11K_HTC_EP_COUNT before returning. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1 Fixes: f951380a6022 ("ath11k: Disabling credit flow for WMI path") Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220528142516.20819-2-ansuelsmth@gmail.com
2022-06-04Merge tag 'bitmap-for-5.19-rc1' of https://github.com/norov/linuxLinus Torvalds
Pull bitmap updates from Yury Norov: - bitmap: optimize bitmap_weight() usage, from me - lib/bitmap.c make bitmap_print_bitmask_to_buf parseable, from Mauro Carvalho Chehab - include/linux/find: Fix documentation, from Anna-Maria Behnsen - bitmap: fix conversion from/to fix-sized arrays, from me - bitmap: Fix return values to be unsigned, from Kees Cook It has been in linux-next for at least a week with no problems. * tag 'bitmap-for-5.19-rc1' of https://github.com/norov/linux: (31 commits) nodemask: Fix return values to be unsigned bitmap: Fix return values to be unsigned KVM: x86: hyper-v: replace bitmap_weight() with hweight64() KVM: x86: hyper-v: fix type of valid_bank_mask ia64: cleanup remove_siblinginfo() drm/amd/pm: use bitmap_{from,to}_arr32 where appropriate KVM: s390: replace bitmap_copy with bitmap_{from,to}_arr64 where appropriate lib/bitmap: add test for bitmap_{from,to}_arr64 lib: add bitmap_{from,to}_arr64 lib/bitmap: extend comment for bitmap_(from,to)_arr32() include/linux/find: Fix documentation lib/bitmap.c make bitmap_print_bitmask_to_buf parseable MAINTAINERS: add cpumask and nodemask files to BITMAP_API arch/x86: replace nodes_weight with nodes_empty where appropriate mm/vmstat: replace cpumask_weight with cpumask_empty where appropriate clocksource: replace cpumask_weight with cpumask_empty in clocksource.c genirq/affinity: replace cpumask_weight with cpumask_empty where appropriate irq: mips: replace cpumask_weight with cpumask_empty where appropriate drm/i915/pmu: replace cpumask_weight with cpumask_empty where appropriate arch/x86: replace cpumask_weight with cpumask_empty where appropriate ...
2022-06-04Merge tag 'for-linus-5.19-rc1b-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull more xen updates from Juergen Gross: "Two cleanup patches for Xen related code and (more important) an update of MAINTAINERS for Xen, as Boris Ostrovsky decided to step down" * tag 'for-linus-5.19-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: replace xen_remap() with memremap() MAINTAINERS: Update Xen maintainership xen: switch gnttab_end_foreign_access() to take a struct page pointer
2022-06-03Merge tag 'usb-5.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the "big" set of USB and Thunderbolt driver changes for 5.18-rc1. For the most part it's been a quiet development cycle for the USB core, but there are the usual "hot spots" of development activity. Included in here are: - Thunderbolt driver updates: - fixes for devices without displayport adapters - lane bonding support and improvements - other minor changes based on device testing - dwc3 gadget driver changes. It seems this driver will never be finished given that the IP core is showing up in zillions of new devices and each implementation decides to do something different with it... - uvc gadget driver updates as more devices start to use and rely on this hardware as well - usb_maxpacket() api changes to remove an unneeded and unused parameter. - usb-serial driver device id updates and small cleanups - typec cleanups and fixes based on device testing - device tree updates for usb properties - lots of other small fixes and driver updates. All of these have been in linux-next for weeks with no reported problems" * tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits) USB: new quirk for Dell Gen 2 devices usb: dwc3: core: Add error log when core soft reset failed usb: dwc3: gadget: Move null pinter check to proper place usb: hub: Simplify error and success path in port_over_current_notify usb: cdns3: allocate TX FIFO size according to composite EP number usb: dwc3: Fix ep0 handling when getting reset while doing control transfer usb: Probe EHCI, OHCI controllers asynchronously usb: isp1760: Fix out-of-bounds array access xhci: Don't defer primary roothub registration if there is only one roothub USB: serial: option: add Quectel BG95 modem USB: serial: pl2303: fix type detection for odd device xhci: Allow host runtime PM as default for Intel Alder Lake N xHCI xhci: Remove quirk for over 10 year old evaluation hardware xhci: prevent U2 link power state if Intel tier policy prevented U1 xhci: use generic command timer for stop endpoint commands. usb: host: xhci-plat: omit shared hcd if either root hub has no ports usb: host: xhci-plat: prepare operation w/o shared hcd usb: host: xhci-plat: create shared hcd after having added main hcd xhci: prepare for operation w/o shared hcd xhci: factor out parts of xhci_gen_setup() ...
2022-06-03Merge tag 'staging-5.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here is the big set of staging driver updates for 5.19-rc1. Lots of forward progress happened this development cycle, one driver (wfx wireless driver) got merged into the real portion of the kernel, and another one (unisys) was removed as no one is around anymore to take care of it and no one has the hardware. Combined with loads of tiny driver cleanups overall we removed 13k lines of code from the tree, a nice improvement. Other than the wfx and unisys driver changes the major points of this merge is: - r8188eu driver cleanups. So many cleanups. It's amazing just how many things have been cleaned up here, and yet, how many remain to go. Lots of work happened here, and it doesn't look to slow down any time soon. - other wifi driver cleanups. Not as many as the r8188eu driver, but still pretty impressive from a janitorial point of view. - bcm2853 driver cleanups - other very minor driver cleanups All of these have been in the linux-next tree for weeks with no reported issues" * tag 'staging-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (363 commits) staging: r8188eu: remove include/rtw_debug.h staging: r8188eu: prevent ->Ssid overflow in rtw_wx_set_scan() staging: r8188eu: delete rtw_wx_read/write32() staging: r8188eu: Remove multiple assignments staging: r8188eu: add check for kzalloc staging: r8188eu: fix warnings in rtw_wlan_util staging: r8188eu: fix warnings in rtw_pwrctrl staging: r8188eu: fix warnings in rtw_p2p staging: rtl8712: fix uninit-value in r871xu_drv_init() staging: rtl8712: fix uninit-value in usb_read8() and friends staging: rtl8712: add error handler in r8712_usbctrl_vendorreq() staging: r8188eu: remove _drv_ defines from include/rtw_debug.h staging: vc04_services: remove unused macro staging: rtl8192u: remove null check after call container_of() staging: rtl8192e: remove null check after call container_of() staging: ks7010: remove null check after call container_of() staging: r8188eu: remove HW_VAR_AC_PARAM_BE from SetHwReg8188EU() staging: r8188eu: assoc_rsp and assoc_rsp_len are not used staging: r8188eu: last_rx_mgnt_pkts is set but not used staging: r8188eu: simplify error handling in recv_func_prehandle ...
2022-06-02Merge tag 'net-5.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf and netfilter. Current release - new code bugs: - af_packet: make sure to pull the MAC header, avoid skb panic in GSO - ptp_clockmatrix: fix inverted logic in is_single_shot() - netfilter: flowtable: fix missing FLOWI_FLAG_ANYSRC flag - dt-bindings: net: adin: fix adi,phy-output-clock description syntax - wifi: iwlwifi: pcie: rename CAUSE macro, avoid MIPS build warning Previous releases - regressions: - Revert "net: af_key: add check for pfkey_broadcast in function pfkey_process" - tcp: fix tcp_mtup_probe_success vs wrong snd_cwnd - nf_tables: disallow non-stateful expression in sets earlier - nft_limit: clone packet limits' cost value - nf_tables: double hook unregistration in netns path - ping6: fix ping -6 with interface name Previous releases - always broken: - sched: fix memory barriers to prevent skbs from getting stuck in lockless qdiscs - neigh: set lower cap for neigh_managed_work rearming, avoid constantly scheduling the probe work - bpf: fix probe read error on big endian in ___bpf_prog_run() - amt: memory leak and error handling fixes Misc: - ipv6: expand & rename accept_unsolicited_na to accept_untracked_na" * tag 'net-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (80 commits) net/af_packet: make sure to pull mac header net: add debug info to __skb_pull() net: CONFIG_DEBUG_NET depends on CONFIG_NET stmmac: intel: Add RPL-P PCI ID net: stmmac: use dev_err_probe() for reporting mdio bus registration failure tipc: check attribute length for bearer name ice: fix access-beyond-end in the switch code nfp: remove padding in nfp_nfdk_tx_desc ax25: Fix ax25 session cleanup problems net: usb: qmi_wwan: Add support for Cinterion MV31 with new baseline sfc/siena: fix wrong tx channel offset with efx_separate_tx_channels sfc/siena: fix considering that all channels have TX queues socket: Don't use u8 type in uapi socket.h net/sched: act_api: fix error code in tcf_ct_flow_table_fill_tuple_ipv6() net: ping6: Fix ping -6 with interface name macsec: fix UAF bug for real_dev octeontx2-af: fix error code in is_valid_offset() wifi: mac80211: fix use-after-free in chanctx code bonding: guard ns_targets by CONFIG_IPV6 tcp: tcp_rtx_synack() can be called from process context ...
generated by cgit v1.2.3 (git 2.25.1) at 2026-09-07 14:57:50 +0000