summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2022-09-22net: ethernet: mtk_eth_wed: add wed support for mt7986 chipsetLorenzo Bianconi
Introduce Wireless Etherne Dispatcher support on transmission side for mt7986 chipset Tested-by: Daniel Golle <daniel@makrotopia.org> Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-22net: ethernet: mtk_eth_wed: add mtk_wed_configure_irq and ↵Lorenzo Bianconi
mtk_wed_dma_{enable/disable} Introduce mtk_wed_configure_irq, mtk_wed_dma_enable and mtk_wed_dma_disable utility routines. This is a preliminary patch to introduce mt7986 wed support. Tested-by: Daniel Golle <daniel@makrotopia.org> Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-22net: ethernet: mtk_eth_soc: add foe_entry_size to mtk_eth_socLorenzo Bianconi
Introduce foe_entry_size to mtk_eth_soc data structure since mt7986 relies on a bigger mtk_foe_entry data structure. Tested-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-22net: ethernet: mtk_eth_soc: move wdma_base definitions in mtk register mapLorenzo Bianconi
This is a preliminary patch to introduce mt7986 wed support. Tested-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-22net: ethernet: mtk_eth_soc: add the capability to run multiple ppeLorenzo Bianconi
mt7986 chipset support multiple packet engines for wlan <-> eth packet forwarding. Tested-by: Daniel Golle <daniel@makrotopia.org> Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-22net: ethernet: mtk_eth_soc: move ppe table hash offset to mtk_soc_data structureLorenzo Bianconi
This is a preliminary patch to introduce mt7986 hw packet engine. Tested-by: Daniel Golle <daniel@makrotopia.org> Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-22net: ethernet: mtk_eth_soc: move gdma_to_ppe and ppe_base definitions in mtk ↵Lorenzo Bianconi
register map This is a preliminary patch to introduce mt7986 hw packet engine. Tested-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-22net: ethernet: altera: TSE: fix error return code in altera_tse_probe()Sun Ke
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: fef2998203e1 ("net: altera: tse: convert to phylink") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sun Ke <sunke32@huawei.com> Link: https://lore.kernel.org/r/20220920020041.2685948-1-sunke32@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-22wifi: ath11k: fix number of VHT beamformee spatial streamsJesus Fernandez Manzano
The number of spatial streams used when acting as a beamformee in VHT mode are reported by the firmware as 7 (8 sts - 1) both in IPQ6018 and IPQ8074 which respectively have 2 and 4 sts each. So the firmware should report 1 (2 - 1) and 3 (4 - 1). Fix this by checking that the number of VHT beamformee sts reported by the firmware is not greater than the number of receiving antennas - 1. The fix is based on the same approach used in this same function for sanitizing the number of sounding dimensions reported by the firmware. Without this change, acting as a beamformee in VHT mode is not working properly. Tested-on: IPQ6018 hw1.0 AHB WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Jesus Fernandez Manzano <jesus.manzano@galgus.net> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220616173947.21901-1-jesus.manzano@galgus.net
2022-09-22wifi: ath11k: retrieve MAC address from system firmware if providedJun Yu
Devices may provide their own MAC address via system firmware (e.g., device tree), especially in the case where the device doesn't have a useful EEPROM on which to store its MAC address (e.g., for integrated ahb WCN6750). Use the generic device helper to retrieve the MAC address, and (if present) honor it above the MAC address advertised by the card. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Signed-off-by: Jun Yu <junyuu@chromium.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220920003117.841442-1-junyuu@chromium.org
2022-09-22wifi: ath11k: add get_txpower mac opsAditya Kumar Singh
Driver does not support get_txpower mac ops because of which cfg80211 returns vif->bss_conf.txpower to user space. bss_conf.txpower gets its value from ieee80211_channel->max_reg_power. However, the final txpower is dependent on few other parameters apart from max regulatory supported power. It is the firmware which knows about all these parameters and considers the minimum for each packet transmission. All ath11k firmware reports the final tx power in firmware pdev stats which falls under fw_stats. Add get_txpower mac ops to get the tx power from firmware leveraging fw_stats and return it accordingly. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220603082814.31466-3-quic_adisi@quicinc.com
2022-09-22wifi: ath11k: move firmware stats out of debugfsAditya Kumar Singh
Currently, firmware stats, comprising pdev, vdev and beacon stats are part of debugfs. In firmware pdev stats, firmware reports the final Tx power used to transmit each packet. If driver wants to know the final Tx power being used at firmware level, it can leverage from firmware pdev stats. Move firmware stats out of debugfs context in order to leverage the final Tx power reported in it even when debugfs is disabled. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220603082814.31466-2-quic_adisi@quicinc.com
2022-09-22wifi: ath9k: fix repeated the words in a commentJilin Yuan
Delete the redundant word 'the'. Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220915030859.45384-1-yuanjilin@cdjrlc.com
2022-09-22wifi: ath9k: fix repeated to words in a commentJilin Yuan
Delete the redundant word 'to'. Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220915030559.42371-1-yuanjilin@cdjrlc.com
2022-09-22wifi: ath10k: reset pointer after memory free to avoid potential use-after-freeWen Gong
When running suspend test, kernel crash happened in ath10k, and it is fixed by commit b72a4aff947b ("ath10k: skip ath10k_halt during suspend for driver state RESTARTING"). Currently the crash is fixed, but as a common code style, it is better to set the pointer to NULL after memory is free. This is to address the code style and it will avoid potential bug of use-after-free. Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220505092248.787-1-quic_wgong@quicinc.com
2022-09-22wifi: ath11k: fix failed to find the peer with peer_id 0 when disconnectedWen Gong
It has a fail log which is ath11k_dbg in ath11k_dp_rx_process_mon_status(), as below, it will not print when debug_mask is not set ATH11K_DBG_DATA. ath11k_dbg(ab, ATH11K_DBG_DATA, "failed to find the peer with peer_id %d\n", ppdu_info.peer_id); When run scan with station disconnected, the peer_id is 0 for case HAL_RX_MPDU_START in ath11k_hal_rx_parse_mon_status_tlv() which called from ath11k_dp_rx_process_mon_status(), and the peer_id of ppdu_info is reset to 0 in the while loop, so it does not match condition of the check "if (ppdu_info->peer_id == HAL_INVALID_PEERID" in the loop, and then the log "failed to find the peer with peer_id 0" print after the check in the loop, it is below call stack when debug_mask is set ATH11K_DBG_DATA. The reason is this commit 01d2f285e3e5 ("ath11k: decode HE status tlv") add "memset(ppdu_info, 0, sizeof(struct hal_rx_mon_ppdu_info))" in ath11k_dp_rx_process_mon_status(), but the commit does not initialize the peer_id to HAL_INVALID_PEERID, then lead the check mis-match. Callstack of the failed log: [12335.689072] RIP: 0010:ath11k_dp_rx_process_mon_status+0x9ea/0x1020 [ath11k] [12335.689157] Code: 89 ff e8 f9 10 00 00 be 01 00 00 00 4c 89 f7 e8 dc 4b 4e de 48 8b 85 38 ff ff ff c7 80 e4 07 00 00 01 00 00 00 e9 20 f8 ff ff <0f> 0b 41 0f b7 96 be 06 00 00 48 c7 c6 b8 50 44 c1 4c 89 ff e8 fd [12335.689180] RSP: 0018:ffffb874001a4ca0 EFLAGS: 00010246 [12335.689210] RAX: 0000000000000000 RBX: ffff995642cbd100 RCX: 0000000000000000 [12335.689229] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff99564212cd18 [12335.689248] RBP: ffffb874001a4dc0 R08: 0000000000000001 R09: 0000000000000000 [12335.689268] R10: 0000000000000220 R11: ffffb874001a48e8 R12: ffff995642473d40 [12335.689286] R13: ffff99564212c5b8 R14: ffff9956424736a0 R15: ffff995642120000 [12335.689303] FS: 0000000000000000(0000) GS:ffff995739000000(0000) knlGS:0000000000000000 [12335.689323] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [12335.689341] CR2: 00007f43c5d5e039 CR3: 000000011c012005 CR4: 00000000000606e0 [12335.689360] Call Trace: [12335.689377] <IRQ> [12335.689418] ? rcu_read_lock_held_common+0x12/0x50 [12335.689447] ? rcu_read_lock_sched_held+0x25/0x80 [12335.689471] ? rcu_read_lock_held_common+0x12/0x50 [12335.689504] ath11k_dp_rx_process_mon_rings+0x8d/0x4f0 [ath11k] [12335.689578] ? ath11k_dp_rx_process_mon_rings+0x8d/0x4f0 [ath11k] [12335.689653] ? lock_acquire+0xef/0x360 [12335.689681] ? rcu_read_lock_sched_held+0x25/0x80 [12335.689713] ath11k_dp_service_mon_ring+0x38/0x60 [ath11k] [12335.689784] ? ath11k_dp_rx_process_mon_rings+0x4f0/0x4f0 [ath11k] [12335.689860] call_timer_fn+0xb2/0x2f0 [12335.689897] ? ath11k_dp_rx_process_mon_rings+0x4f0/0x4f0 [ath11k] [12335.689970] run_timer_softirq+0x21f/0x540 [12335.689999] ? ktime_get+0xad/0x160 [12335.690025] ? lapic_next_deadline+0x2c/0x40 [12335.690053] ? clockevents_program_event+0x82/0x100 [12335.690093] __do_softirq+0x151/0x4a8 [12335.690135] irq_exit_rcu+0xc9/0x100 [12335.690165] sysvec_apic_timer_interrupt+0xa8/0xd0 [12335.690189] </IRQ> [12335.690204] <TASK> [12335.690225] asm_sysvec_apic_timer_interrupt+0x12/0x20 Reset the default value to HAL_INVALID_PEERID each time after memset of ppdu_info as well as others memset which existed in function ath11k_dp_rx_process_mon_status(), then the failed log disappeared. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Fixes: 01d2f285e3e5 ("ath11k: decode HE status tlv") Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220518033556.31940-1-quic_wgong@quicinc.com
2022-09-22wifi: ath11k: change complete() to complete_all() for scan.completedWen Gong
Currently commit 1f682dc9fb37 ("ath11k: reduce the wait time of 11d scan and hw scan while add interface") introduced a wait_for_completion_timeout operation for ar->scan.completed, another one is existed in ath11k_scan_stop(), then ath11k has two places to wait for the ar->scan.completed and they run in different thread, thus it is possible to happend that the two thread both enter wait status. To handle this scenario, ath11k should change the complete() to complete_all() for the ar->scan.completed. This also work well when it is only one thread wait for ar->scan.completed. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220919024413.25083-1-quic_wgong@quicinc.com
2022-09-22Merge tag 'iwlwifi-next-for-kalle-2022-09-18' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next iwlwifi patches for v6.1
2022-09-22Merge tag 'mt76-for-kvalo-2022-09-15' of https://github.com/nbd168/wirelessKalle Valo
mt76 patches for 6.1 - fixes - suspend/resume improvements - tx status reporting improvements
2022-09-22wifi: rtw89: coex: update coexistence to 6.3.0Ching-Te Ku
Since we maintain coexistence as shared code, so move coexistence version from chip specific attribute to a definition. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220920010939.12173-10-pkshih@realtek.com
2022-09-22wifi: rtw89: coex: add logic to control BT scan priorityChing-Te Ku
Add control logic to operate Wi-Fi to BT scoreboard to control BT scan priority. And patch mechanism parameter to enhance Wi-Fi throughput while coexisting with BT profile & BT scan. Set PTA priority let Wi-Fi BT can RX at the same time. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220920010939.12173-9-pkshih@realtek.com
2022-09-22wifi: rtw89: coex: summarize Wi-Fi to BT scoreboard and inform BT one time a ↵Ching-Te Ku
cycle If Wi-Fi driver send Wi-Fi status to BT via scoreboard too frequent in a short moment, BT will loss some of them because of hardware response time. To avoid this issue, change the code flow. Summarize the scoreboard changes and if the value have changed, send the scoreboard to BT only once in a coexistence processing cycle. It also can help to reduce driver I/O. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220920010939.12173-8-pkshih@realtek.com
2022-09-22wifi: rtw89: coex: modify LNA2 setting to avoid BT destroyed Wi-Fi aggregationChing-Te Ku
To prevent LNA2 change its gain during a Wi-Fi aggregation packet while GNT_BT pull high. Otherwise, changes of this gain will destroy the whole aggregation when Wi-Fi RX. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220920010939.12173-7-pkshih@realtek.com
2022-09-22wifi: rtw89: coex: add WL_S0 hardware TX/RX mask to allow WL_S0 TX/RX during ↵Ching-Te Ku
GNT_BT WiFi/BT combo module could only have two antenna, namely WL_S0 and WL_S1. WiFi can use two antenna to TX/RX 2SS data, and BT can share one of the antenna. This patch is to allow WiFi to TX/RX 1SS data like ACK/RTS/CTS to improve Wi-Fi performance while coexisting with Bluetooth. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220920010939.12173-6-pkshih@realtek.com
2022-09-22wifi: rtw89: coex: add v1 Wi-Fi firmware steps reportChing-Te Ku
This report is to record firmware call flow like notify events, and take actions. This can help to address if firmware flow is in expectation. Implement v1 parser to support 8852CE firmware report. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220920010939.12173-5-pkshih@realtek.com
2022-09-22wifi: rtw89: coex: add v1 summary info to parse the traffic status from firmwareChing-Te Ku
This debug entry is to summarize important messages to quickly address problem types, such as firmware hang, C2H/H2C stuck, or too much occupation of BT A2DP. If unexpected something is addressed, we can dig the problem via other debug messages that provide more detail information. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220920010939.12173-4-pkshih@realtek.com
2022-09-22wifi: rtw89: coex: translate slot ID to readable nameChing-Te Ku
To analyze debug log quickly, use readable name in string format instead. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220920010939.12173-3-pkshih@realtek.com
2022-09-22wifi: rtw89: coex: add v1 cycle report to parsing Bluetooth A2DP statusChing-Te Ku
'cysta' is short for statistics for cycles. That is a circular buffer to record snapshot status including beacon count, RX count, TX count etc. Since 8852CE Wi-Fi firmware report this statistics in different format, add v1 parser by this patch. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220920010939.12173-2-pkshih@realtek.com
2022-09-22wifi: mwifiex: fix array of flexible structures warningsJohannes Berg
There are two, just change them to have a "u8 data[]" type member, and add casts where needed. No binary changes. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220904212910.2c885310ebee.If7177ea588b56c405eee6e6df595e9efccdfb99a@changeid
2022-09-22wifi: rndis_wlan: fix array of flexible structures warningJohannes Berg
Use "u8 bssid_data[]" with an appropriate cast. No binary changes. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220904212910.0e7ce5fdbcfb.I972158734def3f93b93a3858a087cbc2cca6337e@changeid
2022-09-22wifi: ipw2x00: fix array of flexible structures warningsJohannes Berg
There are a number of these here, fix them by using appropriate casts. No binary changes. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220904212910.645346411660.I471e8fadce54ea262920828f25b8e84545bcd07e@changeid
2022-09-22mwifiex: fix sleep in atomic context bugs caused by dev_coredumpvDuoming Zhou
There are sleep in atomic context bugs when uploading device dump data in mwifiex. The root cause is that dev_coredumpv could not be used in atomic contexts, because it calls dev_set_name which include operations that may sleep. The call tree shows execution paths that could lead to bugs: (Interrupt context) fw_dump_timer_fn mwifiex_upload_device_dump dev_coredumpv(..., GFP_KERNEL) dev_coredumpm() kzalloc(sizeof(*devcd), gfp); //may sleep dev_set_name kobject_set_name_vargs kvasprintf_const(GFP_KERNEL, ...); //may sleep kstrdup(s, GFP_KERNEL); //may sleep The corresponding fail log is shown below: [ 135.275938] usb 1-1: == mwifiex dump information to /sys/class/devcoredump start [ 135.281029] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:265 ... [ 135.293613] Call Trace: [ 135.293613] <IRQ> [ 135.293613] dump_stack_lvl+0x57/0x7d [ 135.293613] __might_resched.cold+0x138/0x173 [ 135.293613] ? dev_coredumpm+0xca/0x2e0 [ 135.293613] kmem_cache_alloc_trace+0x189/0x1f0 [ 135.293613] ? devcd_match_failing+0x30/0x30 [ 135.293613] dev_coredumpm+0xca/0x2e0 [ 135.293613] ? devcd_freev+0x10/0x10 [ 135.293613] dev_coredumpv+0x1c/0x20 [ 135.293613] ? devcd_match_failing+0x30/0x30 [ 135.293613] mwifiex_upload_device_dump+0x65/0xb0 [ 135.293613] ? mwifiex_dnld_fw+0x1b0/0x1b0 [ 135.293613] call_timer_fn+0x122/0x3d0 [ 135.293613] ? msleep_interruptible+0xb0/0xb0 [ 135.293613] ? lock_downgrade+0x3c0/0x3c0 [ 135.293613] ? __next_timer_interrupt+0x13c/0x160 [ 135.293613] ? lockdep_hardirqs_on_prepare+0xe/0x220 [ 135.293613] ? mwifiex_dnld_fw+0x1b0/0x1b0 [ 135.293613] __run_timers.part.0+0x3f8/0x540 [ 135.293613] ? call_timer_fn+0x3d0/0x3d0 [ 135.293613] ? arch_restore_msi_irqs+0x10/0x10 [ 135.293613] ? lapic_next_event+0x31/0x40 [ 135.293613] run_timer_softirq+0x4f/0xb0 [ 135.293613] __do_softirq+0x1c2/0x651 ... [ 135.293613] RIP: 0010:default_idle+0xb/0x10 [ 135.293613] RSP: 0018:ffff888006317e68 EFLAGS: 00000246 [ 135.293613] RAX: ffffffff82ad8d10 RBX: ffff888006301cc0 RCX: ffffffff82ac90e1 [ 135.293613] RDX: ffffed100d9ff1b4 RSI: ffffffff831ad140 RDI: ffffffff82ad8f20 [ 135.293613] RBP: 0000000000000003 R08: 0000000000000000 R09: ffff88806cff8d9b [ 135.293613] R10: ffffed100d9ff1b3 R11: 0000000000000001 R12: ffffffff84593410 [ 135.293613] R13: 0000000000000000 R14: 0000000000000000 R15: 1ffff11000c62fd2 ... [ 135.389205] usb 1-1: == mwifiex dump information to /sys/class/devcoredump end This patch uses delayed work to replace timer and moves the operations that may sleep into a delayed work in order to mitigate bugs, it was tested on Marvell 88W8801 chip whose port is usb and the firmware is usb8801_uapsta.bin. The following is the result after using delayed work to replace timer. [ 134.936453] usb 1-1: == mwifiex dump information to /sys/class/devcoredump start [ 135.043344] usb 1-1: == mwifiex dump information to /sys/class/devcoredump end As we can see, there is no bug now. Fixes: f5ecd02a8b20 ("mwifiex: device dump support for usb interface") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Brian Norris <briannorris@chromium.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/5cfa5c473ff6d069cb67760ffa04a2f84ef450a8.1661252818.git.duoming@zju.edu.cn
2022-09-21Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-09-20 (ice) Michal re-sets TC configuration when changing number of queues. Mateusz moves the check and call for link-down-on-close to the specific path for downing/closing the interface. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Fix interface being down after reset with link-down-on-close flag on ice: config netdev tc before setting queues number ==================== Link: https://lore.kernel.org/r/20220920205344.1860934-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-21ethernet: tundra: Drop forward declaration of static functionsUwe Kleine-König
Usually it's not necessary to declare static functions if the symbols are in the right order. Moving the definition of tsi_eth_driver down in the compilation unit allows to drop two such declarations. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20220919131515.885361-1-u.kleine-koenig@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-21net: mscc: ocelot: check return values of writes during resetColin Foster
The ocelot_reset() function utilizes regmap_field_write() but wasn't checking return values. While this won't cause issues for the current MMIO regmaps, it could be an issue for externally controlled interfaces. Add checks for these return values. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-21net: mscc: ocelot: utilize readx_poll_timeout() for chip resetColin Foster
Clean up the reset code by utilizing readx_poll_timeout instead of a custom loop. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-21net: ll_temac: axienet: delete unnecessary blank lines and spaceshuangjunxian
Cleaning some static warnings of indent. Signed-off-by: huangjunxian <huangjunxian6@hisilicon.com> Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com> Reviewed-by: Harini Katakam <harini.katakam@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-21net: ll_temac: move trailing statements to next linehuangjunxian
Cleaning some static warnings of trailing statements. Signed-off-by: huangjunxian <huangjunxian6@hisilicon.com> Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com> Reviewed-by: Harini Katakam <harini.katakam@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-21net: ll_temac: fix the missing spaces around '='huangjunxian
Cleaning some static warnings of missing spaces around '='. Signed-off-by: huangjunxian <huangjunxian6@hisilicon.com> Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com> Reviewed-by: Harini Katakam <harini.katakam@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-21net: ll_temac: delete unnecessary else branchhuangjunxian
Cleaning some static warnings of unnecessary else branch. Signed-off-by: huangjunxian <huangjunxian6@hisilicon.com> Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com> Reviewed-by: Harini Katakam <harini.katakam@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-21net: ll_temac: axienet: align with open parenthesishuangjunxian
Cleaning some static warnings of open parenthesis. Signed-off-by: huangjunxian <huangjunxian6@hisilicon.com> Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com> Reviewed-by: Harini Katakam <harini.katakam@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-21net: ll_temac: Cleanup for function name in a stringHaoyue Xu
As Checkpatch.pl warns, prefer using '"%s...", __func__' to using 'temac_device_reset', this function's name, in a string. Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com> Reviewed-by: Harini Katakam <harini.katakam@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-21net: ll_temac: fix the format of block commentshuangjunxian
Cleaning some static warnings of block comments. Signed-off-by: huangjunxian <huangjunxian6@hisilicon.com> Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com> Reviewed-by: Harini Katakam <harini.katakam@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-21net: macvtap: add __init/__exit annotations to module init/exit funcsXiu Jianfeng
Add missing __init/__exit annotations to module init/exit funcs. Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com> Link: https://lore.kernel.org/r/20220917083535.20040-1-xiujianfeng@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-21net: hns3: add __init/__exit annotations to module init/exit funcsXiu Jianfeng
Add missing __init/__exit annotations to module init/exit funcs. Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com> Link: https://lore.kernel.org/r/20220917082118.7971-1-xiujianfeng@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-21net: ethernet: ti: am65-cpsw: remove unused parameter of ↵Jian Shen
am65_cpsw_nuss_common_open() The inptu parameter 'features' is unused now. so remove it. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Link: https://lore.kernel.org/r/20220917020451.63417-1-huangguangbin2@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-21ice: Fix ice_xdp_xmit() when XDP TX queue number is not sufficientLarysa Zaremba
The original patch added the static branch to handle the situation, when assigning an XDP TX queue to every CPU is not possible, so they have to be shared. However, in the XDP transmit handler ice_xdp_xmit(), an error was returned in such cases even before static condition was checked, thus making queue sharing still impossible. Fixes: 22bf877e528f ("ice: introduce XDP_TX fallback path") Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Link: https://lore.kernel.org/r/20220919134346.25030-1-larysa.zaremba@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-21Merge branch '40GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-09-19 (iavf, i40e) Norbert adds checking of buffer size for Rx buffer checks in iavf. Michal corrects setting of max MTU in iavf to account for MTU data provided by PF, fixes i40e to set VF max MTU, and resolves lack of rate limiting when value was less than divisor for i40e. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: i40e: Fix set max_tx_rate when it is lower than 1 Mbps i40e: Fix VF set max MTU size iavf: Fix set max MTU size with port VLAN and jumbo frames iavf: Fix bad page state ==================== Link: https://lore.kernel.org/r/20220919223428.572091-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-21net: fjes: Reorder symbols to get rid of a few forward declarationsUwe Kleine-König
Quite a few of the functions and other symbols defined in this driver had forward declarations. They can all be dropped after reordering them. This saves a few lines of code and reduces code duplication. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20220917225142.473770-1-u.kleine-koenig@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-21net: hns3: add judge fd ability for sync and clear process of flow directorGuangbin Huang
Currently, driver will always clear user defined field of flow director in uninit process and sync flow director table in periodic task. However, if hardware does not support flow director driver should not do those processes, so add fd ability judgement. The fd ability judgement in function hclge_clear_fd_rules_in_list() is redundant, so delete it. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2026-09-07 04:24:21 +0000