summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2022-09-26sunhme: Regularize probe errorsSean Anderson
This fixes several error paths to ensure they return an appropriate error (instead of ENODEV). Signed-off-by: Sean Anderson <seanga2@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-26sunhme: Return an ERR_PTR from quattro_pci_findSean Anderson
In order to differentiate between a missing bridge and an OOM condition, return ERR_PTRs from quattro_pci_find. This also does some general linting in the area. Signed-off-by: Sean Anderson <seanga2@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-26sunhme: forward the error code from pci_enable_device()Rolf Eike Beer
This already returns a proper error value, so pass it to the caller. Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: Sean Anderson <seanga2@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-26sunhme: Remove versionSean Anderson
Module versions are not very useful: > The basic problem is, the version string does not identify the sources > with enough accuracy. It says nothing about back ported fixes in > stable kernels. It tells you nothing about vendor patches to the > network core, etc. https://lore.kernel.org/all/Yf6mtvA1zO7cdzr7@lunn.ch/ While we're at it, inline the author and use the driver name a bit more. Signed-off-by: Sean Anderson <seanga2@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-26sunhme: remove unused tx_dump_ring()Rolf Eike Beer
I can't find a reference to it in the entire git history. Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: Sean Anderson <seanga2@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-26net: dsa: xrs700x: remove unnecessary i2c_set_clientdata()Yang Yingliang
Remove unnecessary i2c_set_clientdata() in ->remove(), the driver_data will be set to NULL in device_unbind_cleanup() after calling ->remove(). Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-26net: dsa: microchip: ksz9477: remove unnecessary i2c_set_clientdata()Yang Yingliang
Remove unnecessary i2c_set_clientdata() in ->remove(), the driver_data will be set to NULL in device_unbind_cleanup() after calling ->remove(). Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-26net: dsa: lan9303: remove unnecessary i2c_set_clientdata()Yang Yingliang
Remove unnecessary i2c_set_clientdata() in ->remove(), the driver_data will be set to NULL in device_unbind_cleanup() after calling ->remove(). Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-26net: hippi: Add missing pci_disable_device() in rr_init_one()ruanjinjie
Add missing pci_disable_device() if rr_init_one() fails Signed-off-by: ruanjinjie <ruanjinjie@huawei.com> Link: https://lore.kernel.org/r/20220923094320.3109154-1-ruanjinjie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-26net/mlxbf_gige: Fix an IS_ERR() vs NULL bug in mlxbf_gige_mdio_probePeng Wu
The devm_ioremap() function returns NULL on error, it doesn't return error pointers. Fixes: 3a1a274e933f ("mlxbf_gige: compute MDIO period based on i1clk") Signed-off-by: Peng Wu <wupeng58@huawei.com> Link: https://lore.kernel.org/r/20220923023640.116057-1-wupeng58@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-26cxgb4: fix missing unlock on ETHOFLD desc collect fail pathRafael Mendonca
The label passed to the QDESC_GET for the ETHOFLD TXQ, RXQ, and FLQ, is the 'out' one, which skips the 'out_unlock' label, and thus doesn't unlock the 'uld_mutex' before returning. Additionally, since commit 5148e5950c67 ("cxgb4: add EOTID tracking and software context dump"), the access to these ETHOFLD hardware queues should be protected by the 'mqprio_mutex' instead. Fixes: 2d0cb84dd973 ("cxgb4: add ETHOFLD hardware queue support") Fixes: 5148e5950c67 ("cxgb4: add EOTID tracking and software context dump") Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com> Reviewed-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Link: https://lore.kernel.org/r/20220922175109.764898-1-rafaelmendsr@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-26net: ethernet: adin1110: Add missing MODULE_DEVICE_TABLEYang Yingliang
This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Fixes: bc93e19d088b ("net: ethernet: adi: Add ADIN1110 support") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220922070438.586692-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-26net: vertexcom: mse102x: Silence no spi_device_id warningsWei Yongjun
SPI devices use the spi_device_id for module autoloading even on systems using device tree, after commit 5fa6863ba692 ("spi: Check we have a spi_device_id for each DT compatible"), kernel warns as follows since the spi_device_id is missing: SPI driver mse102x has no spi_device_id for vertexcom,mse1021 SPI driver mse102x has no spi_device_id for vertexcom,mse1022 Add spi_device_id entries to silence the warnings, and ensure driver module autoloading works. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20220922065717.1448498-1-weiyongjun@huaweicloud.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-26net: ethernet: adi: Fix return value check in adin1110_probe_netdevs()Wei Yongjun
In case of error, the function get_phy_device() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: bc93e19d088b ("net: ethernet: adi: Add ADIN1110 support") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20220922021023.811581-1-weiyongjun@huaweicloud.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-26net: phy: micrel: enable interrupt for ksz9477 phyArun Ramadoss
Config_intr and handle_interrupt are enabled for ksz9477 phy. It is similar to all other phys in the micrel phys. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-26net: dsa: microchip: use common irq routines for girq and pirqArun Ramadoss
The global port interrupt routines and individual ports interrupt routines has similar implementation except the mask & status register and number of nested irqs in them. The mask & status register and pointer to ksz_device is added to ksz_irq and uses the ksz_irq as irq_chip_data. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-26net: dsa: microchip: move interrupt handling logic from lan937x to ksz_commonArun Ramadoss
To support the phy link detection through interrupt method for ksz9477 based switch, the interrupt handling routines are moved from lan937x_main.c to ksz_common.c. The only changes made are functions names are prefixed with ksz_ instead of lan937x_. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-26net: dsa: microchip: lan937x: return zero if mdio node not presentArun Ramadoss
Currently, if the mdio node is not present in the dts file then lan937x_mdio_register return -ENODEV and entire probing process fails. To make the mdio_register generic for all ksz series switches and to maintain back-compatibility with existing dts file, return -ENODEV is replaced with return 0. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-26net: dsa: microchip: enable phy interrupts only if interrupt enabled in dtsArun Ramadoss
In the lan937x_mdio_register function, phy interrupts are enabled irrespective of irq is enabled in the switch. Now, the check is added to enable the phy interrupt only if the irq is enabled in the switch. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-26net: dsa: microchip: determine number of port irq based on switch typeArun Ramadoss
Currently the number of port irqs is hard coded for the lan937x switch as 6. In order to make the generic interrupt handler for ksz switches, number of port irq supported by the switch is added to the ksz_chip_data. It is 4 for ksz9477, 2 for ksz9897 and 3 for ksz9567. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-26mlxsw: reg: Remove deprecated code about SFTR-V2 RegisterGaosheng Cui
Remove all the code about SFTR-V2 Register which have been deprecated since commit 77b7f83d5c25 ("mlxsw: Enable unified bridge model"). Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-26net: ethernet: stmicro: stmmac: dwmac-rk: Add rv1126 supportAnand Moon
Rockchip RV1126 has GMAC 10/100/1000M ethernet controller via RGMII and RMII interfaces are configured via M0 and M1 pinmux. This patch adds rv1126 support by adding delay lines of M0 and M1 simultaneously. Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com> Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: Anand Moon <anand@edgeble.ai> Signed-off-by: Jagan Teki <jagan@edgeble.ai> Link: https://lore.kernel.org/r/20220920140944.2535-2-anand@edgeble.ai Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-26usbnet: Fix memory leak in usbnet_disconnect()Peilin Ye
Currently usbnet_disconnect() unanchors and frees all deferred URBs using usb_scuttle_anchored_urbs(), which does not free urb->context, causing a memory leak as reported by syzbot. Use a usb_get_from_anchor() while loop instead, similar to what we did in commit 19cfe912c37b ("Bluetooth: btusb: Fix memory leak in play_deferred"). Also free urb->sg. Reported-and-tested-by: syzbot+dcd3e13cf4472f2e0ba1@syzkaller.appspotmail.com Fixes: 69ee472f2706 ("usbnet & cdc-ether: Autosuspend for online devices") Fixes: 638c5115a794 ("USBNET: support DMA SG") Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Link: https://lore.kernel.org/r/20220923042551.2745-1-yepeilin.cs@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-26Revert "net: mvpp2: debugfs: fix memory leak when using debugfs_lookup()"Sasha Levin
This reverts commit fe2c9c61f668cde28dac2b188028c5299cedcc1e. On Tue, Sep 13, 2022 at 05:48:58PM +0100, Russell King (Oracle) wrote: >What happens if this is built as a module, and the module is loaded, >binds (and creates the directory), then is removed, and then re- >inserted? Nothing removes the old directory, so doesn't >debugfs_create_dir() fail, resulting in subsequent failure to add >any subsequent debugfs entries? > >I don't think this patch should be backported to stable trees until >this point is addressed. Revert until a proper fix is available as the original behavior was better. Cc: Marcin Wojtas <mw@semihalf.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: stable@kernel.org Reported-by: Russell King <linux@armlinux.org.uk> Fixes: fe2c9c61f668 ("net: mvpp2: debugfs: fix memory leak when using debugfs_lookup()") Signed-off-by: Sasha Levin <sashal@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20220923234736.657413-1-sashal@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-26macsec: don't free NULL metadata_dstSabrina Dubroca
Commit 0a28bfd4971f added a metadata_dst to each tx_sc, but that's only allocated when macsec_add_dev has run, which happens after device registration. If the requested or computed SCI already exists, or if linking to the lower device fails, we will panic because metadata_dst_free can't handle NULL. Reproducer: ip link add link $lower type macsec ip link add link $lower type macsec Fixes: 0a28bfd4971f ("net/macsec: Add MACsec skb_metadata_dst Tx Data path support") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Raed Salem <raeds@nvidia.com> Link: https://lore.kernel.org/r/60f2a1965fe553e2cade9472407d0fafff8de8ce.1663923580.git.sd@queasysnail.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-26wifi: ath11k: Fix deadlock during WoWLAN suspendBaochen Qiang
We are seeing system hangs during WoWLAN suspend, and get below two stacks: Stack1: [ffffb02cc1557b20] __schedule at ffffffff8bb10860 [ffffb02cc1557ba8] schedule at ffffffff8bb10f24 [ffffb02cc1557bb8] schedule_timeout at ffffffff8bb16d88 [ffffb02cc1557c30] wait_for_completion at ffffffff8bb11778 [ffffb02cc1557c78] __flush_work at ffffffff8b0b30cd [ffffb02cc1557cf0] __cancel_work_timer at ffffffff8b0b33ad [ffffb02cc1557d60] ath11k_mac_drain_tx at ffffffffc0c1f0ca [ath11k] [ffffb02cc1557d70] ath11k_wow_op_suspend at ffffffffc0c5201e [ath11k] [ffffb02cc1557da8] __ieee80211_suspend at ffffffffc11e2bd3 [mac80211] [ffffb02cc1557dd8] wiphy_suspend at ffffffffc0f901ac [cfg80211] [ffffb02cc1557e08] dpm_run_callback at ffffffff8b75118a [ffffb02cc1557e38] __device_suspend at ffffffff8b751630 [ffffb02cc1557e70] async_suspend at ffffffff8b7519ea [ffffb02cc1557e88] async_run_entry_fn at ffffffff8b0bf4ce [ffffb02cc1557ea8] process_one_work at ffffffff8b0b1a24 [ffffb02cc1557ee0] worker_thread at ffffffff8b0b1c4a [ffffb02cc1557f18] kthread at ffffffff8b0b9cb8 [ffffb02cc1557f50] ret_from_fork at ffffffff8b001d32 Stack2: [ffffb02cc00b7d18] __schedule at ffffffff8bb10860 [ffffb02cc00b7da0] schedule at ffffffff8bb10f24 [ffffb02cc00b7db0] schedule_preempt_disabled at ffffffff8bb112b4 [ffffb02cc00b7db8] __mutex_lock at ffffffff8bb127ea [ffffb02cc00b7e38] ath11k_mgmt_over_wmi_tx_work at ffffffffc0c1aa44 [ath11k] [ffffb02cc00b7ea8] process_one_work at ffffffff8b0b1a24 [ffffb02cc00b7ee0] worker_thread at ffffffff8b0b1c4a [ffffb02cc00b7f18] kthread at ffffffff8b0b9cb8 [ffffb02cc00b7f50] ret_from_fork at ffffffff8b001d32 From the first stack, ath11k_mac_drain_tx calls cancel_work_sync(&ar->wmi_mgmt_tx_work) and waits all packets to be sent out or dropped. However, we find from Stack2 that this work item is blocked because ar->conf_mutex is already held by ath11k_wow_op_suspend. Fix this issue by moving ath11k_mac_wait_tx_complete to the start of ath11k_wow_op_suspend where ar->conf_mutex has not been acquired. And this change also makes the logic in ath11k_wow_op_suspend match the logic in ath11k_mac_op_start and ath11k_mac_op_stop. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220919021435.2459-1-quic_bqiang@quicinc.com
2022-09-26wifi: ath11k: Remove redundant ath11k_mac_drain_txBaochen Qiang
ath11k_mac_drain_tx is already called in ath11k_mac_wait_tx_complete, no need to call it again. So remove it. This is found in code review. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220919020259.1746-1-quic_bqiang@quicinc.com
2022-09-26wifi: ath11k: Add spectral scan support for 160 MHzTamizh Chelvam Raja
There are two types of 160 MHz spectral scan support mentioned below 1. Fragmented approach 2. Single event approach In this fragmented approach, single 160 MHz will be split as two 80 MHz buffer. First fft sample buffer will contain spectral scan result of primary 80 MHz and the second fft sample buffer will contain secondary 80 MHz and here cfreq1 and cfreq2 will be mentioned. In case of 160 MHz on 36th channel will contain cfreq1 as 5210 and cfreq2 as 5290. Chipsets which support this approach are IPQ8074/IPQ6018. Replacing freq1 with freq2 in every secondary sepctral scan event to distinguish between two different 80 MHz spectral event data. In the 2nd approach each fft sample buffer will contain spectral scan result for whole 160 MHz by mentioning cfreq1 as 5250 which is center frequency of whole 160 MHz. Chipset which support this approach is QCN9074. Host will receive spectral event from target for every 5 fft samples. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01120-QCAHKSWPL-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01120-QCAHKSWP Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220725055001.15194-1-quic_tamizhr@quicinc.com
2022-09-26wifi: ath11k: Add support to get power save duration for each clientVenkateswara Naralasetty
Add support to get the following power save information through debugfs interface, * Current ps state of the peer * Time duration since the peer is in power save * Total duration of the peer spent in power save Above information is helpful in debugging the issues with power save clients. This patch also add trace log support for PS timekeeper to track the PS state change of the peers alongs with the peer MAC address and timestamp. Use the below commands to get the above power save information, To know the time_since_station_in_power_save: cat /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/stations/ XX:XX:XX:XX:XX:XX/current_ps_duration To know power_save_duration: cat /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/stations/ XX:XX:XX:XX:XX:XX/total_ps_duration To reset the power_save_duration of all stations connected to AP: echo 1 > /sys/kernel/debug/ieee80211/phyX/ath11k/reset_ps_duration To enable/disable the ps_timekeeper: echo Y > /sys/kernel/debug/ieee80211/phyX/ath11k/ps_timekeeper_enable Y = 1 to enable and Y = 0 to disable. To record PS timekeeer logs after enabling ps_timekeeper: trace-cmd record -e ath11k_ps_timekeeper Tested-on: Tested-on: IPQ8074 WLAN.HK.2.5.0.1-00991-QCAHKSWPL_SILICONZ-1 Signed-off-by: Venkateswara Naralasetty <quic_vnaralas@quicinc.com> Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220725054601.14719-1-quic_tamizhr@quicinc.com
2022-09-25Merge 7e2cd21e02b3 ("Merge tag 'tty-6.0-rc7' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty") into tty-next We need the tty fixes and api additions in this branch. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24wifi: ath11k: fix peer addition/deletion error on sta band migrationChristian 'Ansuel' Marangi
This patch try to fix the following error. Wed Jun 1 22:19:30 2022 kern.warn kernel: [ 119.561227] ath11k c000000.wifi: peer already added vdev id 0 req, vdev id 1 present Wed Jun 1 22:19:30 2022 kern.warn kernel: [ 119.561282] ath11k c000000.wifi: Failed to add peer: 28:c2:1f:xx:xx:xx for VDEV: 0 Wed Jun 1 22:19:30 2022 kern.warn kernel: [ 119.568053] ath11k c000000.wifi: Failed to add station: 28:c2:1f:xx:xx:xx for VDEV: 0 Wed Jun 1 22:19:31 2022 daemon.notice hostapd: wlan2: STA 28:c2:1f:xx:xx:xx IEEE 802.11: Could not add STA to kernel driver Wed Jun 1 22:19:31 2022 daemon.notice hostapd: wlan2: STA 28:c2:1f:xx:xx:xx IEEE 802.11: did not acknowledge authentication response Wed Jun 1 22:19:31 2022 daemon.notice hostapd: wlan1: AP-STA-DISCONNECTED 28:c2:1f:xx:xx:xx Wed Jun 1 22:19:31 2022 daemon.info hostapd: wlan1: STA 28:c2:1f:xx:xx:xx IEEE 802.11: disassociated due to inactivity Wed Jun 1 22:19:32 2022 daemon.info hostapd: wlan1: STA 28:c2:1f:xx:xx:xx IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE) To repro this: - Have 2 Wifi with the same bssid and pass on different band (2.4 and 5GHz) - Enable 802.11r Fast Transaction with same mobility domain - FT Protocol: FT over the Air From a openwrt system issue the command (with the correct mac) ubus call hostapd.wlan1 wnm_disassoc_imminent '{"addr":"28:C2:1F:xx:xx:xx"}' Notice the log printing the errors. The cause of this error has been investigated and we found that this is related to the WiFi Fast Transaction feature. We observed that this is triggered when the router tells the device to change band. In this case the device first auth to the other band and then the disconnect path from the prev band is triggered. This is problematic with the current rhash implementation since the addrs is used as key and the logic of "adding first, delete later" conflicts with the rhash logic. In fact peer addition will fail since the peer is already added and with that fixed a peer deletion will cause unitended effect by removing the peer just added. Current solution to this is to add additional logic to the peer delete, make sure we are deleting the correct peer taken from the rhash table (and fallback to the peer list) and for the peer add logic delete the peer entry for the rhash list before adding the new one (counting as an error only when a peer with the same vlan_id is asked to be added). With this change, a sta can correctly transition from 2.4GHz and 5GHZ with no drop and no error are printed. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1 Fixes: 7b0c70d92a43 ("ath11k: Add peer rhash table support") Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220603164559.27769-1-ansuelsmth@gmail.com
2022-09-24wifi: rtw89: support for enable/disable MSDU aggregationKuan-Chung Chen
To enable/disable amsdu in set_tid_config, and currently only support to configure all tids (==0xff) for AMSDU, not individual tid. The command example is: iw wlan0 set tidconf tids 0xff amsdu off iw wlan0 set tidconf peer xx:xx:xx:xx:xx:xx tids 0xff amsdu on Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220922012737.15091-1-pkshih@realtek.com
2022-09-24wifi: rtw89: disable 26-tone RU HE TB PPDU transmissionsKuan-Chung Chen
Align with the spec of 802.11ax, follow the conditions for not responding with an HE TB PPDU. When there are OBSS that cannot interpret 26-tone RU transmissions, we should disable such transmissions. Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220922012719.15037-1-pkshih@realtek.com
2022-09-24wifi: rtw89: support for processing P2P power savingDian-Syuan Yang
Support P2P client to process Notice of Absence (NoA) mechanism when it connects with P2P GO applying an NoA schedule. We define some action types including init, update, remove and terminate in h2c function to enable/disable NoA schedule. Signed-off-by: Dian-Syuan Yang <dian_syuan0116@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220922010435.12167-6-pkshih@realtek.com
2022-09-24wifi: rtw89: support WMM-PS in P2P GO modeDian-Syuan Yang
To handle a connected client using WMM-PS, the P2P GO also need to enable this power save mechanism. We add WIPHY_FLAG_AP_UAPSD flag to support it and define maximum number of buffered frames the WMM GO may deliver to the WMM client. Signed-off-by: Dian-Syuan Yang <dian_syuan0116@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220922010435.12167-5-pkshih@realtek.com
2022-09-24wifi: rtw89: set wifi_role of P2PPing-Ke Shih
Consider vif->p2p to set wifi_role to let firmware know current vif is running as GC or GO. And, allow GC to enter PS mode, but disallow to enter deep PS for now. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220922010435.12167-4-pkshih@realtek.com
2022-09-24wifi: rtw89: send OFDM rate only in P2P modeDian-Syuan Yang
Check IEEE80211_TX_CTL_NO_CCK_RATE flag to avoid sending frames with CCK rates in 2GHz band. In TX flow, add IEEE80211_TX_CTL_NO_CCK_RATE flag to check and get its lowest rate without CCK rates if the TX type is mgmt frames or data frames. Besides, the decision of phy rate and retry rate in P2P mode are also be handled. In P2P GO mode, it should send beacon of no CCK rates in its frame rate. Therefore, We add a condition to decide which rate is added to beacon content. Moreover, we avoid setting a mask of rates to be used for rate control selection before and after connection in P2P mode. Signed-off-by: Dian-Syuan Yang <dian_syuan0116@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220922010435.12167-3-pkshih@realtek.com
2022-09-24wifi: rtw89: support P2PPo Hao Huang
To support P2P in driver, we set P2P interface mode to the wiphy allocated for 802.11 PHY and add a change interface function to switch the interface type to P2P. Signed-off-by: Po Hao Huang <phhuang@realtek.com> Signed-off-by: Dian-Syuan Yang <dian_syuan0116@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220922010435.12167-2-pkshih@realtek.com
2022-09-24wifi: rt2x00: correctly set BBP register 86 for MT7620Daniel Golle
Instead of 0 set the correct value for BBP register 86 for MT7620. Reported-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/257267247ee4fa7ebc6a5d0c4948b3f8119c0d77.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: set SoC wmac clock registerDaniel Golle
Instead of using the default value 33 (pci), set US_CYC_CNT init based on Programming guide: If available, set chipset bus clock with fallback to cpu clock/3. Reported-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/3e275d259f476f597dab91a9c395015ef3fe3284.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: set VGC gain for both chains of MT7620Daniel Golle
Set bbp66 for all chains of the MT7620. Reported-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/29e161397e5c9d9399da0fe87d44458aa2b90a78.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: set correct TX_SW_CFG1 MAC register for MT7620Daniel Golle
Set correct TX_SW_CFG1 MAC register as it is done also in v3 of the vendor driver[1]. [1]: https://gitlab.com/dm38/padavan-ng/-/blob/master/trunk/proprietary/rt_wifi/rtpci/3.0.X.X/mt76x2/chips/rt6352.c#L531 Reported-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/4be38975ce600a34249e12d09a3cb758c6e71071.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: fix HT20/HT40 bandwidth switch on MT7620Daniel Golle
Add missing configuration of the channel bandwidth filter to the channel setup function for MT7620. Reported-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/1664d89ba149f7b0bcec18b2a2abaedf49654507.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: move helper functions up in fileDaniel Golle
Move register access helper functions up to the head of the file so they can be used in all functions. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/c27baa8efd5c29e2bcb2432925d9cdc5c913a125.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: add TX LOFT calibration for MT7620Tomislav Požega
Add TX LOFT calibration from mtk driver. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/d9295a9138a1f552b648aacb84e1419d38f5c896.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: don't run Rt5592 IQ calibration on MT7620Daniel Golle
The function rt2800_iq_calibrate is intended for Rt5592 only. Don't call it for MT7620 which has it's own calibration functions. Reported-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/31a1c34ddbd296b82f38c18c9ae7339059215fdc.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: add RXIQ calibration for MT7620Tomislav Požega
Add RXIQ calibration found in mtk driver. With old openwrt builds this gets us ~8Mbps more of RX bandwidth (test with iPA/eLNA layout). Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/033a39a697d51f6df258acea4c33608e0944fe4c.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: add RXDCOC calibration for MT7620Tomislav Požega
Add RXDCOC calibration code from mtk driver. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> [fixed typo reported by Serge Vasilugin <vasilugin@yandex.ru>] Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/850b30f652e88de30d79e968af4eb47aa5bc2511.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: add r calibration for MT7620Tomislav Požega
Add r calibration code as found in mtk driver. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/e0c34f233089bec4eb73826bc4f512166ee25934.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: add RF self TXDC calibration for MT7620Tomislav Požega
Add TX self calibration based on mtk driver. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/dbb6e5a0c12d6101477bd09e83253091d21512c9.1663445157.git.daniel@makrotopia.org
generated by cgit v1.2.3 (git 2.25.1) at 2026-09-07 02:01:58 +0000