summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2022-10-10wifi: mac80211: add wake_tx_queue callback to driversAlexander Wetzel
mac80211 is fully switching over to the internal TX queue (iTXQ) implementation. Update all drivers not yet providing the now mandatory wake_tx_queue() callback. As an side effect the netdev interfaces of all updated drivers will switch to the noqueue qdisc. Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> [add staging drivers] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-10wifi: mac80211_hwsim: avoid mac80211 warning on bad rateJohannes Berg
If the tool on the other side (e.g. wmediumd) gets confused about the rate, we hit a warning in mac80211. Silence that by effectively duplicating the check here and dropping the frame silently (in mac80211 it's dropped with the warning). Reported-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de> Tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-10octeontx2-pf: mcs: fix possible memory leak in otx2_probe()Yang Yingliang
In error path after calling cn10k_mcs_init(), cn10k_mcs_free() need be called to avoid memory leak. Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-09octeontx2-af: cn10k: mcs: Fix error return code in mcs_register_interrupts()Yang Yingliang
If alloc_mem() fails in mcs_register_interrupts(), it should return error code. Fixes: 6c635f78c474 ("octeontx2-af: cn10k: mcs: Handle MCS block interrupts") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-09octeontx2-pf: mcs: fix missing unlock in some error pathsYang Yingliang
Add the missing unlock in some error paths. Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-09macvlan: enforce a consistent minimal mtuEric Dumazet
macvlan should enforce a minimal mtu of 68, even at link creation. This patch avoids the current behavior (which could lead to crashes in ipv6 stack if the link is brought up) $ ip link add macvlan1 link eno1 mtu 8 type macvlan # This should fail ! $ ip link sh dev macvlan1 5: macvlan1@eno1: <BROADCAST,MULTICAST> mtu 8 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 02:47:6c:24:74:82 brd ff:ff:ff:ff:ff:ff $ ip link set macvlan1 mtu 67 Error: mtu less than device minimum. $ ip link set macvlan1 mtu 68 $ ip link set macvlan1 mtu 8 Error: mtu less than device minimum. Fixes: 91572088e3fd ("net: use core MTU range checking in core net infra") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-07Merge tag 'tty-6.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big set of TTY and Serial driver updates for 6.1-rc1. Lots of cleanups in here, no real new functionality this time around, with the diffstat being that we removed more lines than we added! Included in here are: - termios unification cleanups from Al Viro, it's nice to finally get this work done - tty serial transmit cleanups in various drivers in preparation for more cleanup and unification in future releases (that work was not ready for this release) - n_gsm fixes and updates - ktermios cleanups and code reductions - dt bindings json conversions and updates for new devices - some serial driver updates for new devices - lots of other tiny cleanups and janitorial stuff. Full details in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (102 commits) serial: cpm_uart: Don't request IRQ too early for console port tty: serial: do unlock on a common path in altera_jtaguart_console_putc() tty: serial: unify TX space reads under altera_jtaguart_tx_space() tty: serial: use FIELD_GET() in lqasc_tx_ready() tty: serial: extend lqasc_tx_ready() to lqasc_console_putchar() tty: serial: allow pxa.c to be COMPILE_TESTed serial: stm32: Fix unused-variable warning tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMEL serial: 8250: Fix restoring termios speed after suspend serial: Deassert Transmit Enable on probe in driver-specific way serial: 8250_dma: Convert to use uart_xmit_advance() serial: 8250_omap: Convert to use uart_xmit_advance() MAINTAINERS: Solve warning regarding inexistent atmel-usart binding serial: stm32: Deassert Transmit Enable on ->rs485_config() serial: ar933x: Deassert Transmit Enable on ->rs485_config() tty: serial: atmel: Use FIELD_PREP/FIELD_GET tty: serial: atmel: Make the driver aware of the existence of GCLK tty: serial: atmel: Only divide Clock Divisor if the IP is USART tty: serial: atmel: Separate mode clearing between UART and USART dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock ...
2022-10-07virtio-net: use mtu size as buffer length for big packetsGavin Li
Currently add_recvbuf_big() allocates MAX_SKB_FRAGS segments for big packets even when GUEST_* offloads are not present on the device. However, if guest GSO is not supported, it would be sufficient to allocate segments to cover just up the MTU size and no further. Allocating the maximum amount of segments results in a large waste of buffer space in the queue, which limits the number of packets that can be buffered and can result in reduced performance. Therefore, if guest GSO is not supported, use the MTU to calculate the optimal amount of segments required. Below is the iperf TCP test results over a Mellanox NIC, using vDPA for 1 VQ, queue size 1024, before and after the change, with the iperf server running over the virtio-net interface. MTU(Bytes)/Bandwidth (Gbit/s) Before After 1500 22.5 22.4 9000 12.8 25.9 And result of queue size 256. MTU(Bytes)/Bandwidth (Gbit/s) Before After 9000 2.15 11.9 With this patch no degradation is observed with multiple below tests and feature bit combinations. Results are summarized below for q depth of 1024. Interface MTU is 1500 if MTU feature is disabled. MTU is set to 9000 in other tests. Features/ Bandwidth (Gbit/s) Before After mtu off 20.1 20.2 mtu/indirect on 17.4 17.3 mtu/indirect/packed on 17.2 17.2 Signed-off-by: Gavin Li <gavinl@nvidia.com> Reviewed-by: Gavi Teitz <gavi@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com> Message-Id: <20220914144911.56422-3-gavinl@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2022-10-07virtio-net: introduce and use helper function for guest gso support checksGavin Li
Probe routine is already several hundred lines. Use helper function for guest gso support check. Signed-off-by: Gavin Li <gavinl@nvidia.com> Reviewed-by: Gavi Teitz <gavi@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com> Message-Id: <20220914144911.56422-2-gavinl@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-10-07cfg80211: Update Transition Disable policy during port authorizationVinayak Yadawad
In case of 4way handshake offload, transition disable policy updated by the AP during EAPOL 3/4 is not updated to the upper layer. This results in mismatch between transition disable policy between the upper layer and the driver. This patch addresses this issue by updating transition disable policy as part of port authorization indication. Signed-off-by: Vinayak Yadawad <vinayak.yadawad@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07net: ethernet: bgmac: Remove -Warray-bounds exceptionKees Cook
GCC-12 emits false positive -Warray-bounds warnings with CONFIG_UBSAN_SHIFT (-fsanitize=shift). This is fixed in GCC 13[1], and there is top-level Makefile logic to remove -Warray-bounds for known-bad GCC versions staring with commit f0be87c42cbd ("gcc-12: disable '-Warray-bounds' universally for now"). Remove the local work-around. [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105679 Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-07net: ethernet: mediatek: Remove -Warray-bounds exceptionKees Cook
GCC-12 emits false positive -Warray-bounds warnings with CONFIG_UBSAN_SHIFT (-fsanitize=shift). This is fixed in GCC 13[1], and there is top-level Makefile logic to remove -Warray-bounds for known-bad GCC versions staring with commit f0be87c42cbd ("gcc-12: disable '-Warray-bounds' universally for now"). Remove the local work-around. [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105679 Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-07prestera: matchall: do not rollback if rule existsSerhiy Boiko
If you try to create a 'mirror' ACL rule on a port that already has a mirror rule, prestera_span_rule_add() will fail with EEXIST error. This forces rollback procedure which destroys existing mirror rule on hardware leaving it visible in linux. Add an explicit check for EEXIST to prevent the deletion of the existing rule but keep user seeing error message: $ tc filter add dev sw1p1 ... skip_sw action mirred egress mirror dev sw1p2 $ tc filter add dev sw1p1 ... skip_sw action mirred egress mirror dev sw1p3 RTNETLINK answers: File exists We have an error talking to the kernel Fixes: 13defa275eef ("net: marvell: prestera: Add matchall support") Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-07net: enetc: Remove duplicated include in enetc_qos.cYang Li
net/pkt_sched.h is included twice in enetc_qos.c, remove one of them. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2334 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-07octeontx2-pf: mcs: remove unneeded semicolonYang Li
Semicolon is not required after curly braces. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2332 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-07hv_netvsc: Fix race between VF offering and VF association message from hostGaurav Kohli
During vm boot, there might be possibility that vf registration call comes before the vf association from host to vm. And this might break netvsc vf path, To prevent the same block vf registration until vf bind message comes from host. Cc: stable@vger.kernel.org Fixes: 00d7ddba11436 ("hv_netvsc: pair VF based on serial number") Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Gaurav Kohli <gauravkohli@linux.microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-06Merge tag 'arm-drivers-6.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM driver updates from Arnd Bergmann: "The drivers branch for 6.1 is a bit larger than for most releases. Most of the changes come from SoC maintainers for the drivers/soc subsystem: - A new driver for error handling on the NVIDIA Tegra 'control backbone' bus. - A new driver for Qualcomm LLCC/DDR bandwidth measurement - New Rockchip rv1126 and rk3588 power domain drivers - DT binding updates for memory controllers, older Rockchip SoCs, various Mediatek devices, Qualcomm SCM firmware - Minor updates to Hisilicon LPC bus, the Allwinner SRAM driver, the Apple rtkit firmware driver, Tegra firmware - Minor updates for SoC drivers (Samsung, Mediatek, Renesas, Tegra, Qualcomm, Broadcom, NXP, ...) There are also some separate subsystem with downstream maintainers that merge updates this way: - Various updates and new drivers in the memory controller subsystem for Mediatek and Broadcom SoCs - Small set of changes in preparation to add support for FF-A v1.1 specification later, in the Arm FF-A firmware subsystem - debugfs support in the PSCI firmware subsystem" * tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (149 commits) ARM: remove check for CONFIG_DEBUG_LL_SER3 firmware/psci: Add debugfs support to ease debugging firmware/psci: Print a warning if PSCI doesn't accept PC mode dt-bindings: memory: snps,dw-umctl2-ddrc: Extend schema with IRQs/resets/clocks props dt-bindings: memory: snps,dw-umctl2-ddrc: Replace opencoded numbers with macros dt-bindings: memory: snps,dw-umctl2-ddrc: Use more descriptive device name dt-bindings: memory: synopsys,ddrc-ecc: Detach Zynq DDRC controller support soc: sunxi: sram: Add support for the D1 system control soc: sunxi: sram: Export the LDO control register soc: sunxi: sram: Save a pointer to the OF match data soc: sunxi: sram: Return void from the release function soc: apple: rtkit: Add apple_rtkit_poll soc: imx: add i.MX93 media blk ctrl driver soc: imx: add i.MX93 SRC power domain driver soc: imx: imx8m-blk-ctrl: Use genpd_xlate_onecell soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl soc: imx: add i.MX8MP HDMI blk ctrl HDCP/HRV_MWR soc: imx: add icc paths for i.MX8MP hsio/hdmi blk ctrl soc: imx: add icc paths for i.MX8MP media blk ctrl ...
2022-10-06wifi: mt76: fix rate reporting / throughput regression on mt7915 and newerFelix Fietkau
mt7915 and newer need to report the rate_info that's stored in wcid->rate, since they don't fill info->status.rates. Cc: Jonas Jelonek <jelonek.jonas@gmail.com> Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Link: https://lore.kernel.org/all/CABXGCsP0znm9pS-MiKtyxTXR7XiyFVqen0qzNpicGHDZKCzbwg@mail.gmail.com/ Fixes: 44fa75f207d8 ("mac80211: extend current rate control tx status API") Signed-off-by: Felix Fietkau <nbd@nbd.name> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220927093823.6007-1-nbd@nbd.name
2022-10-05net: ethernet: adi: adin1110: Add check in netdev_eventAlexandru Tachici
Check whether this driver actually is the intended recipient of upper change event. Fixes: bc93e19d088b ("net: ethernet: adi: Add ADIN1110 support") Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Link: https://lore.kernel.org/r/20221003111636.54973-1-alexandru.tachici@analog.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-05net: pse-pd: PSE_REGULATOR should depend on REGULATORGeert Uytterhoeven
The Regulator based PSE controller driver relies on regulator support to be enabled. If regulator support is disabled, it will still compile fine, but won't operate correctly. Hence add a dependency on REGULATOR, to prevent asking the user about this driver when configuring a kernel without regulator support. Fixes: 66741b4e94ca7bb1 ("net: pse-pd: add regulator based PSE driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/709caac8873ff2a8b72b92091429be7c1a939959.1664900558.git.geert+renesas@glider.be Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-05wifi: atmel: Avoid clashing function prototypesKees Cook
When built with Control Flow Integrity, function prototypes between caller and function declaration must match. These mismatches are visible at compile time with the new -Wcast-function-type-strict in Clang[1]. Of the 1549 warnings found, 188 come from the atmel driver. For example: drivers/net/wireless/atmel/atmel.c:2518:2: warning: cast from 'int (*)(struct net_device *, struct iw_request_info *, void *, char *)' to 'iw_handler' (aka 'int (*)(struct net_device *, struct iw_request_info *, union iwreq_data *, char *)') converts to incompatible function type [-Wcast-function-type-strict] (iw_handler) atmel_config_commit, /* SIOCSIWCOMMIT */ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The atmel Wireless Extension handler callbacks (iw_handler) use a union for the data argument. Actually use the union and perform explicit member selection in the function body instead of having a function prototype mismatch. There are no resulting binary differences. This patch is a cleanup based on Brad Spengler/PaX Team's modifications to the atmel driver in their last public patch of grsecurity/PaX based on my understanding of the code. Changes or omissions from the original code are mine and don't reflect the original grsecurity/PaX code. [1] https://reviews.llvm.org/D134831 Cc: Simon Kelley <simon@thekelleys.org.uk> Cc: Kalle Valo <kvalo@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221002032428.4091540-1-keescook@chromium.org
2022-10-05wifi: rtw89: add to dump TX FIFO 0/1 for 8852CPing-Ke Shih
MAC maintains TX FIFO to transmit packets with meta data to BB layer. To debug abnormal transmission, we need to dump the content to dig problem. Since FIFO of 8852C locates on different address with different size and need additional switch to enable read operation, this patch adds the changes accordingly. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220930134417.10282-2-pkshih@realtek.com
2022-10-05wifi: rtw89: 8852c: set pin MUX to enable BT firmware logPing-Ke Shih
8852CE is a combo chip, and WiFi driver controls pin MUX. To output BT firmware log to specific hardware pin, set pin MUX to achieve. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220930134417.10282-1-pkshih@realtek.com
2022-10-05wifi: rtw89: phy: ignore warning of bb gain cfg_type 4Ping-Ke Shih
The new BB parameters add new cfg_tpe 4 to improve performance of eFEM modules (rfe_type >= 50), but we are using iFEM modules for now, so this warning can be ignored. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220930133659.7789-2-pkshih@realtek.com
2022-10-05wifi: rtw89: 8852c: update BB parameters to v28Ping-Ke Shih
Update BB parameters along with internal tag HALBB_027_067_07. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220930133659.7789-1-pkshih@realtek.com
2022-10-05wifi: rtw89: 8852c: rfk: correct miscoding delay of DPKPing-Ke Shih
Using mdelay() can work well, but calibration causes too much time. Use proper udelay() to get shorter time and the same result. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220930133318.6335-2-pkshih@realtek.com
2022-10-05wifi: rtw89: 8852c: correct set of IQK backup registersPing-Ke Shih
IQK can change the values of this register set, so need to backup and restore the values. During we rewrite IQK, the policy is changed. Some values are controlled and filled by IQK, and don't need to restore after IQK. Therefore, remove this kind of registers from this array. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220930133318.6335-1-pkshih@realtek.com
2022-10-05brcmfmac: Fix AP interface delete issuePrasanna Kerekoppa
Fixes the ap interface delete issue. Fix is to make sure interface is created with supported version. Patch has been verified by creating and deleting AP interface. Signed-off-by: Prasanna Kerekoppa <prasanna.kerekoppa@infineon.com> Signed-off-by: Ian Lin <ian.lin@infineon.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220929050614.31518-4-ian.lin@infineon.com
2022-10-05brcmfmac: support station interface creation version 1, 2 and 3Wright Feng
To create virtual station interface for RSDB and VSDB, we add interface creation version 1, 2 and 3 supports The structures of each version are different and only version 3 and later version are able to get interface creating version from firmware side. The patch has been verified two concurrent stations pings test with interface create version 1: 89342(4359b1)-PCIE: 9.40.100 interface create version 2: 4373a0-sdio: 13.10.271 interface create version 3: 4373a0-sdio: 13.35.48 Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@infineon.com> Signed-off-by: Ian Lin <ian.lin@infineon.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220929050614.31518-3-ian.lin@infineon.com
2022-10-05brcmfmac: add creating station interface supportWright Feng
With RSDB device, it is able to control two station interfaces concurrently. So we add creating station interface support and allow user to create it via cfg80211. Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@infineon.com> Signed-off-by: Ian Lin <ian.lin@infineon.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220929050614.31518-2-ian.lin@infineon.com
2022-10-04Merge tag 'i2c-for-6.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - 'remove' callback converted to return void. Big change with trivial fixes all over the tree. Other subsystems depending on this change have been asked to pull an immutable topic branch for this. - new driver for Microchip PCI1xxxx switch - heavy refactoring of the Mellanox BlueField driver - we prefer async probe in the i801 driver now - the rest is usual driver updates (support for more SoCs, some refactoring, some feature additions) * tag 'i2c-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (37 commits) i2c: pci1xxxx: prevent signed integer overflow i2c: acpi: Replace zero-length array with DECLARE_FLEX_ARRAY() helper i2c: i801: Prefer async probe i2c: designware-pci: Use standard pattern for memory allocation i2c: designware-pci: Group AMD NAVI quirk parts together i2c: microchip: pci1xxxx: Add driver for I2C host controller in multifunction endpoint of pci1xxxx switch docs: i2c: slave-interface: return errno when handle I2C_SLAVE_WRITE_REQUESTED i2c: mlxbf: remove device tree support i2c: mlxbf: support BlueField-3 SoC i2c: cadence: Add standard bus recovery support i2c: mlxbf: add multi slave functionality i2c: mlxbf: support lock mechanism macintosh/ams: Adapt declaration of ams_i2c_remove() to earlier change i2c: riic: Use devm_platform_ioremap_resource() i2c: mlxbf: remove IRQF_ONESHOT dt-bindings: i2c: rockchip: add rockchip,rk3128-i2c dt-bindings: i2c: renesas,rcar-i2c: Add r8a779g0 support i2c: tegra: Add GPCDMA support i2c: scmi: Convert to be a platform driver i2c: rk3x: Add rv1126 support ...
2022-10-04Merge tag 'net-next-6.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Introduce and use a single page frag cache for allocating small skb heads, clawing back the 10-20% performance regression in UDP flood test from previous fixes. - Run packets which already went thru HW coalescing thru SW GRO. This significantly improves TCP segment coalescing and simplifies deployments as different workloads benefit from HW or SW GRO. - Shrink the size of the base zero-copy send structure. - Move TCP init under a new slow / sleepable version of DO_ONCE(). BPF: - Add BPF-specific, any-context-safe memory allocator. - Add helpers/kfuncs for PKCS#7 signature verification from BPF programs. - Define a new map type and related helpers for user space -> kernel communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF). - Allow targeting BPF iterators to loop through resources of one task/thread. - Add ability to call selected destructive functions. Expose crash_kexec() to allow BPF to trigger a kernel dump. Use CAP_SYS_BOOT check on the loading process to judge permissions. - Enable BPF to collect custom hierarchical cgroup stats efficiently by integrating with the rstat framework. - Support struct arguments for trampoline based programs. Only structs with size <= 16B and x86 are supported. - Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping sockets (instead of just TCP and UDP sockets). - Add a helper for accessing CLOCK_TAI for time sensitive network related programs. - Support accessing network tunnel metadata's flags. - Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open. - Add support for writing to Netfilter's nf_conn:mark. Protocols: - WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation (MLO) work (802.11be, WiFi 7). - vsock: improve support for SO_RCVLOWAT. - SMC: support SO_REUSEPORT. - Netlink: define and document how to use netlink in a "modern" way. Support reporting missing attributes via extended ACK. - IPSec: support collect metadata mode for xfrm interfaces. - TCPv6: send consistent autoflowlabel in SYN_RECV state and RST packets. - TCP: introduce optional per-netns connection hash table to allow better isolation between namespaces (opt-in, at the cost of memory and cache pressure). - MPTCP: support TCP_FASTOPEN_CONNECT. - Add NEXT-C-SID support in Segment Routing (SRv6) End behavior. - Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets. - Open vSwitch: - Allow specifying ifindex of new interfaces. - Allow conntrack and metering in non-initial user namespace. - TLS: support the Korean ARIA-GCM crypto algorithm. - Remove DECnet support. Driver API: - Allow selecting the conduit interface used by each port in DSA switches, at runtime. - Ethernet Power Sourcing Equipment and Power Device support. - Add tc-taprio support for queueMaxSDU parameter, i.e. setting per traffic class max frame size for time-based packet schedules. - Support PHY rate matching - adapting between differing host-side and link-side speeds. - Introduce QUSGMII PHY mode and 1000BASE-KX interface mode. - Validate OF (device tree) nodes for DSA shared ports; make phylink-related properties mandatory on DSA and CPU ports. Enforcing more uniformity should allow transitioning to phylink. - Require that flash component name used during update matches one of the components for which version is reported by info_get(). - Remove "weight" argument from driver-facing NAPI API as much as possible. It's one of those magic knobs which seemed like a good idea at the time but is too indirect to use in practice. - Support offload of TLS connections with 256 bit keys. New hardware / drivers: - Ethernet: - Microchip KSZ9896 6-port Gigabit Ethernet Switch - Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs - Analog Devices ADIN1110 and ADIN2111 industrial single pair Ethernet (10BASE-T1L) MAC+PHY. - Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP). - Ethernet SFPs / modules: - RollBall / Hilink / Turris 10G copper SFPs - HALNy GPON module - WiFi: - CYW43439 SDIO chipset (brcmfmac) - CYW89459 PCIe chipset (brcmfmac) - BCM4378 on Apple platforms (brcmfmac) Drivers: - CAN: - gs_usb: HW timestamp support - Ethernet PHYs: - lan8814: cable diagnostics - Ethernet NICs: - Intel (100G): - implement control of FCS/CRC stripping - port splitting via devlink - L2TPv3 filtering offload - nVidia/Mellanox: - tunnel offload for sub-functions - MACSec offload, w/ Extended packet number and replay window offload - significantly restructure, and optimize the AF_XDP support, align the behavior with other vendors - Huawei: - configuring DSCP map for traffic class selection - querying standard FEC statistics - querying SerDes lane number via ethtool - Marvell/Cavium: - egress priority flow control - MACSec offload - AMD/SolarFlare: - PTP over IPv6 and raw Ethernet - small / embedded: - ax88772: convert to phylink (to support SFP cages) - altera: tse: convert to phylink - ftgmac100: support fixed link - enetc: standard Ethtool counters - macb: ZynqMP SGMII dynamic configuration support - tsnep: support multi-queue and use page pool - lan743x: Rx IP & TCP checksum offload - igc: add xdp frags support to ndo_xdp_xmit - Ethernet high-speed switches: - Marvell (prestera): - support SPAN port features (traffic mirroring) - nexthop object offloading - Microchip (sparx5): - multicast forwarding offload - QoS queuing offload (tc-mqprio, tc-tbf, tc-ets) - Ethernet embedded switches: - Marvell (mv88e6xxx): - support RGMII cmode - NXP (felix): - standardized ethtool counters - Microchip (lan966x): - QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets) - traffic policing and mirroring - link aggregation / bonding offload - QUSGMII PHY mode support - Qualcomm 802.11ax WiFi (ath11k): - cold boot calibration support on WCN6750 - support to connect to a non-transmit MBSSID AP profile - enable remain-on-channel support on WCN6750 - Wake-on-WLAN support for WCN6750 - support to provide transmit power from firmware via nl80211 - support to get power save duration for each client - spectral scan support for 160 MHz - MediaTek WiFi (mt76): - WiFi-to-Ethernet bridging offload for MT7986 chips - RealTek WiFi (rtw89): - P2P support" * tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits) eth: pse: add missing static inlines once: rename _SLOW to _SLEEPABLE net: pse-pd: add regulator based PSE driver dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller ethtool: add interface to interact with Ethernet Power Equipment net: mdiobus: search for PSE nodes by parsing PHY nodes. net: mdiobus: fwnode_mdiobus_register_phy() rework error handling net: add framework to support Ethernet PSE and PDs devices dt-bindings: net: phy: add PoDL PSE property net: marvell: prestera: Propagate nh state from hw to kernel net: marvell: prestera: Add neighbour cache accounting net: marvell: prestera: add stub handler neighbour events net: marvell: prestera: Add heplers to interact with fib_notifier_info net: marvell: prestera: Add length macros for prestera_ip_addr net: marvell: prestera: add delayed wq and flush wq on deinit net: marvell: prestera: Add strict cleanup of fib arbiter net: marvell: prestera: Add cleanup of allocated fib_nodes net: marvell: prestera: Add router nexthops ABI eth: octeon: fix build after netif_napi_add() changes net/mlx5: E-Switch, Return EBUSY if can't get mode lock ...
2022-10-04brcmfmac: dump dongle memory when attaching failedWright Feng
To enhance FW debugging, we add dongle memory dump when hitting attaching failure with PCIE bus. It can help developer to get more information about dongle trap reason and root cause. Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Ian Lin <ian.lin@infineon.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220929031001.9962-4-ian.lin@infineon.com
2022-10-04brcmfmac: return error when getting invalid max_flowrings from dongleWright Feng
When firmware hit trap at initialization, host will read abnormal max_flowrings number from dongle, and it will cause kernel panic when doing iowrite to initialize dongle ring. To detect this error at early stage, we directly return error when getting invalid max_flowrings(>256). Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Ian Lin <ian.lin@infineon.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220929031001.9962-3-ian.lin@infineon.com
2022-10-04brcmfmac: add a timer to read console periodically in PCIE busWright Feng
Currently, host only reads console buffer when receiving mailbox data or hit crash with PCIE bus. Therefore, we add timer in PCIE code to read console buffer periodically to help developer and user check firmware message when there is no data transmission between host and dongle. Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Ian Lin <ian.lin@infineon.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220929031001.9962-2-ian.lin@infineon.com
2022-10-04brcmfmac: Fix authentication latency caused by OBSS stats surveyRamesh Rangavittal
Auto Channel Select feature of HostAP uses dump_survey to fetch OBSS statistics. When the device is in the middle of an authentication sequence or just at the end of authentication completion, running dump_survey would trigger a channel change. The channel change in-turn can cause packet loss, resulting in authentication delay. With this change, dump_survey won't be run when authentication or association is in progress, hence resolving the issue. Signed-off-by: Ramesh Rangavittal <ramesh.rangavittal@infineon.com> Signed-off-by: Chung-Hsien Hsu <chung-hsien.hsu@infineon.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@infineon.com> Signed-off-by: Ian Lin <ian.lin@infineon.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220929012527.4152-5-ian.lin@infineon.com
2022-10-04brcmfmac: fix CERT-P2P:5.1.10 failureDouble Lo
This patch fix CERT-P2P:5.1.10 failure at step 18 Group formation failed due to chip is under dump survey. Decrease the dump survery duration to pass this certification case. Signed-off-by: Double Lo <double.lo@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@infineon.com> Signed-off-by: Ian Lin <ian.lin@infineon.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220929012527.4152-4-ian.lin@infineon.com
2022-10-04brcmfmac: fix firmware trap while dumping obss statsWright Feng
When doing dump_survey, host will call "dump_obss" iovar to firmware side. Host need to make sure the HW clock in dongle is on, or there is high probability that firmware gets trap because register or shared memory access failed. To fix this, we disable mpc when doing dump obss and set it back after that. [28350.512799] brcmfmac: brcmf_dump_obss: dump_obss error (-52) [28743.402314] ieee80211 phy0: brcmf_fw_crashed: Firmware has halted or crashed [28745.869430] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout [28745.877546] brcmfmac: brcmf_sdio_checkdied: firmware trap in dongle Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@infineon.com> Signed-off-by: Ian Lin <ian.lin@infineon.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220929012527.4152-3-ian.lin@infineon.com
2022-10-04brcmfmac: Add dump_survey cfg80211 ops for HostApd AutoChannelSelectionWright Feng
To enable ACS feature in Hostap daemon, dump_survey cfg80211 ops and dump obss survey command in firmware side are needed. This patch is for adding dump_survey feature and adding DUMP_OBSS feature flag to check if firmware supports dump_obss iovar. Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Ian Lin <ian.lin@infineon.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220929012527.4152-2-ian.lin@infineon.com
2022-10-04wifi: rtl8xxxu: gen2: Turn on the rate controlBitterblue Smith
Re-enable the function rtl8xxxu_gen2_report_connect. It informs the firmware when connecting to a network. This makes the firmware enable the rate control, which makes the upload faster. It also informs the firmware when disconnecting from a network. In the past this made reconnecting impossible because it was sending the auth on queue 0x7 (TXDESC_QUEUE_VO) instead of queue 0x12 (TXDESC_QUEUE_MGNT): wlp0s20f0u3: send auth to 90:55:de:__:__:__ (try 1/3) wlp0s20f0u3: send auth to 90:55:de:__:__:__ (try 2/3) wlp0s20f0u3: send auth to 90:55:de:__:__:__ (try 3/3) wlp0s20f0u3: authentication with 90:55:de:__:__:__ timed out Probably the firmware disables the unnecessary TX queues when it knows it's disconnected. However, this was fixed in commit edd5747aa12e ("wifi: rtl8xxxu: Fix skb misuse in TX queue selection"). Fixes: c59f13bbead4 ("rtl8xxxu: Work around issue with 8192eu and 8723bu devices not reconnecting") Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/43200afc-0c65-ee72-48f8-231edd1df493@gmail.com
2022-10-04wifi: rtl8xxxu: Support new chip RTL8188FUBitterblue Smith
This chip is found in the cheapest USB adapters, e.g. 1.17 USD with VAT and shipping from China included. It's a gen 2 chip, similar to the RTL8723BU, but without Bluetooth. Features: 2.4 GHz, b/g/n mode, 1T1R, 150 Mbps. The vendor driver rtl8188fu version 4.3.23.6_20964.20170110 [0] was used as reference. The CD shipped with the device includes a newer driver, version 5.11.5-1-g12f7cde4b.20201102, but that one couldn't complete the WPA2 key exchange thing for whatever reason. [0] https://github.com/kelebek333/rtl8188fu Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/b14f299d-3248-98fe-eee1-ba50d2e76c74@gmail.com
2022-10-04wifi: rtw89: 8852be: add 8852BE PCI entryPing-Ke Shih
8852BE has two variants with different ID. One is 10ec:b852 that is a main model with 2x2 antenna, and the other is 10ec:b85b that is a 1x1 model. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220928084336.34981-10-pkshih@realtek.com
2022-10-04wifi: rtw89: 8852b: add chip_ops to read phy capPing-Ke Shih
This efuse region is to store PHY calibration, and it is a separated region from the region that stores MAC address. Then, use these data to configure via chip_ops::power_trim that is a calibration mechanism of TX power. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220928084336.34981-9-pkshih@realtek.com
2022-10-04wifi: rtw89: 8852b: add chip_ops to read efusePing-Ke Shih
efuse stores individual data about a chip itself, such as MAC address, country code, RF and crystal calibration data, and so on. Define a struct to help access efuse content, and copy them into a common struct. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220928084336.34981-8-pkshih@realtek.com
2022-10-04wifi: rtw89: 8852b: add chip_ops::set_txpwrPing-Ke Shih
This chip_ops is to set TX power according to country, channel, rate and so on. Since shared code is used to configure TX power, we only implement specific part in this patch. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220928084336.34981-7-pkshih@realtek.com
2022-10-04wifi: rtw89: debug: txpwr_table considers signZong-Zhe Yang
Previously, value of each field is just shown as unsigned. Now, we start to show them with sign to make things more intuitive during debugging. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220928084336.34981-6-pkshih@realtek.com
2022-10-04wifi: rtw89: phy: make generic txpwr setting functionsZong-Zhe Yang
Previously, we thought control registers or setting things for TX power series may change according to chip. So, setting functions are implemented chip by chip. However, until now, the functions keep the same among chips, at least 8852A, 8852C, and 8852B. There is a sufficient number of chips to share generic setting functions. So, we now remake them including TX power by rate, TX power offset, TX power limit, and TX power limit RU as generic ones in phy.c. Besides, there are some code refinements in the generic ones, but almost all of the logic doesn't change. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220928084336.34981-5-pkshih@realtek.com
2022-10-04wifi: rtw89: 8852b: add tables for RFKPing-Ke Shih
These tables are used by RFK to assist to configure PHY and RF registers. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220928084336.34981-4-pkshih@realtek.com
2022-10-04wifi: rtw89: 8852b: add BB and RF tables (2 of 2)Ping-Ke Shih
These tables contain BB and RF parameters that driver will load them into registers. It also contains TX power according to country, band, rate and so on. Increasing thermal can cause TX power degraded, so power tracking tables are defined to compensate TX power. Internal version of these tables: - HALRF_029_00_014 (R32) - HALBB_027_046_05 Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220928084336.34981-3-pkshih@realtek.com
2022-10-04wifi: rtw89: 8852b: add BB and RF tables (1 of 2)Ping-Ke Shih
These tables contain BB and RF parameters that driver will load them into registers. It also contains TX power according to country, band, rate and so on. Increasing thermal can cause TX power degraded, so power tracking tables are defined to compensate TX power. Internal version of these tables: - HALRF_029_00_014 (R32) - HALBB_027_046_05 Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220928084336.34981-2-pkshih@realtek.com
generated by cgit v1.2.3 (git 2.25.1) at 2026-09-07 02:50:43 +0000