summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2022-10-12wifi: rtw89: 8852b: add basic attributes of chip_infoPing-Ke Shih
Add 8852b specific constant tables and basic attributes containing common chip_ops, firmware name, supported TX/RX NSS, number of CAM, coexistence version, control register set, and so on. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221009125403.19662-10-pkshih@realtek.com
2022-10-12wifi: rtw89: 8852b: add functions to control BB to assist RF calibrationsPing-Ke Shih
When we are going to do RF calibrations, they need BB helpers to control TX PLCP, power, path and mode. Also, it they need helpers to backup and restore some registers before and after RF calibrations. Then, use flow of RF calibrations will be like backup registers, configure calibration, configure TX parameters, measure calibration result, and finally restore registers. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221009125403.19662-9-pkshih@realtek.com
2022-10-12wifi: rtw89: 8852b: add chip_ops to configure TX/RX pathPing-Ke Shih
To support variant models, such as 1x1 or 1T2R, we need this chip_ops to change the path accordingly. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221009125403.19662-8-pkshih@realtek.com
2022-10-12wifi: rtw89: 8852b: add chip_ops to query PPDUPing-Ke Shih
Add to parse PPDU to get frequency and RSSI of received packets. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221009125403.19662-7-pkshih@realtek.com
2022-10-12wifi: rtw89: 8852b: add chip_ops related to BT coexistencePing-Ke Shih
These chip_ops are used to assist BT coexistence module to control chip specific operations, such as initial, pre-AGC, BT grant, set wifi priority and tx power, RX gain, and get BT counter. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221009125403.19662-6-pkshih@realtek.com
2022-10-12wifi: rtw89: 8852b: add chip_ops to get thermalPing-Ke Shih
Thermal value reflects temperature that will affect RF performance, so we re-calibrate RF characteristics if delta of thermal over a threshold. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221009125403.19662-5-pkshih@realtek.com
2022-10-12wifi: rtw89: 8852b: add basic baseband chip_opsPing-Ke Shih
chip_ops::bb_reset is to reset baseband state after loading parameters, because its state could be unpredictable at that moment. The other is chip_ops::bb_sethw that is to set some baseband settings not including in parameter tables. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221009125403.19662-4-pkshih@realtek.com
2022-10-12wifi: rtw89: 8852b: add power on/off functionsPing-Ke Shih
We need power on function to enable hardware circuits of MAC/BB/RF, and then download firmware and load PHY parameters. After more settings, it starts to work. When it enters idle, use power off function to have the lowest power consumption. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221009125403.19662-3-pkshih@realtek.com
2022-10-12wifi: rtw89: 8852b: add chip_ops::set_channel_helpPing-Ke Shih
This chip_ops is to assist set_channel, because we need setup and restore hardware before and after set_channel. Before set_channel, we stop transmitting, reset PPDU status, disable TSSI, and disable ADC. After set_channel, do opposite things in reverse order. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221009125403.19662-2-pkshih@realtek.com
2022-10-12wifi: rtl8xxxu: Update module descriptionBitterblue Smith
Make the title more future-proof, using rtw88 as a model. Mention support for RTL8723BU, RTL8192EU, and RTL8188FU. Correct the module name. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/ecb7512a-07e8-112d-c815-1494582de5f8@gmail.com
2022-10-12wifi: rtl8xxxu: Fix reading the vendor of combo chipsBitterblue Smith
The wifi + bluetooth combo chips (RTL8723AU and RTL8723BU) read the chip vendor from the wrong register because the val32 variable gets overwritten. Add one more variable to avoid this. This had no real effect on RTL8723BU. It may have had an effect on RTL8723AU. Fixes: 26f1fad29ad9 ("New driver: rtl8xxxu (mac80211)") Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/24af8024-2f07-552b-93d8-38823d8e3cb0@gmail.com
2022-10-12wifi: rtl8xxxu: Make some arrays constBitterblue Smith
All the initialisation tables, plus rtl8xxxu_rfregs. Most of them were already static. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/9407f219-a7ba-676e-3d99-154d67b312d2@gmail.com
2022-10-11Merge tag 'wireless-2022-10-11' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Kalle Valo says: ==================== wireless fixes for v6.1 First set of fixes for v6.1. Quite a lot of fixes in stack but also for mt76. cfg80211/mac80211 - fix locking error in mac80211's hw addr change - fix TX queue stop for internal TXQs - handling of very small (e.g. STP TCN) packets - two memcpy() hardening fixes - fix probe request 6 GHz capability warning - fix various connection prints - fix decapsulation offload for AP VLAN mt76 - fix rate reporting, LLC packets and receive checksum offload on specific chipsets iwlwifi - fix crash due to list corruption ath11k - fix a compiler warning with GCC 11 and KASAN * tag 'wireless-2022-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: ath11k: mac: fix reading 16 bytes from a region of size 0 warning wifi: iwlwifi: mvm: fix double list_add at iwl_mvm_mac_wake_tx_queue (other cases) wifi: mt76: fix rx checksum offload on mt7615/mt7915/mt7921 wifi: mt76: fix receiving LLC packets on mt7615/mt7915 wifi: nl80211: Split memcpy() of struct nl80211_wowlan_tcp_data_token flexible array wifi: wext: use flex array destination for memcpy() wifi: cfg80211: fix ieee80211_data_to_8023_exthdr handling of small packets wifi: mac80211: netdev compatible TX stop for iTXQ drivers wifi: mac80211: fix decap offload for stations on AP_VLAN interfaces wifi: mac80211: unlock on error in ieee80211_can_powered_addr_change() wifi: mac80211: remove/avoid misleading prints wifi: mac80211: fix probe req HE capabilities access wifi: mac80211: do not drop packets smaller than the LLC-SNAP header on fast-rx wifi: mt76: fix rate reporting / throughput regression on mt7915 and newer ==================== Link: https://lore.kernel.org/r/20221011163123.A093CC433D6@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-11treewide: use get_random_bytes() when possibleJason A. Donenfeld
The prandom_bytes() function has been a deprecated inline wrapper around get_random_bytes() for several releases now, and compiles down to the exact same code. Replace the deprecated wrapper with a direct call to the real function. This was done as a basic find and replace. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> # powerpc Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11treewide: use get_random_u32() when possibleJason A. Donenfeld
The prandom_u32() function has been a deprecated inline wrapper around get_random_u32() for several releases now, and compiles down to the exact same code. Replace the deprecated wrapper with a direct call to the real function. The same also applies to get_random_int(), which is just a wrapper around get_random_u32(). This was done as a basic find and replace. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake Acked-by: Chuck Lever <chuck.lever@oracle.com> # for nfsd Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> # for thunderbolt Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Acked-by: Helge Deller <deller@gmx.de> # for parisc Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11treewide: use get_random_{u8,u16}() when possible, part 2Jason A. Donenfeld
Rather than truncate a 32-bit value to a 16-bit value or an 8-bit value, simply use the get_random_{u8,u16}() functions, which are faster than wasting the additional bytes from a 32-bit value. This was done by hand, identifying all of the places where one of the random integer functions was used in a non-32-bit context. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11treewide: use get_random_{u8,u16}() when possible, part 1Jason A. Donenfeld
Rather than truncate a 32-bit value to a 16-bit value or an 8-bit value, simply use the get_random_{u8,u16}() functions, which are faster than wasting the additional bytes from a 32-bit value. This was done mechanically with this coccinelle script: @@ expression E; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; typedef __be16; typedef __le16; typedef u8; @@ ( - (get_random_u32() & 0xffff) + get_random_u16() | - (get_random_u32() & 0xff) + get_random_u8() | - (get_random_u32() % 65536) + get_random_u16() | - (get_random_u32() % 256) + get_random_u8() | - (get_random_u32() >> 16) + get_random_u16() | - (get_random_u32() >> 24) + get_random_u8() | - (u16)get_random_u32() + get_random_u16() | - (u8)get_random_u32() + get_random_u8() | - (__be16)get_random_u32() + (__be16)get_random_u16() | - (__le16)get_random_u32() + (__le16)get_random_u16() | - prandom_u32_max(65536) + get_random_u16() | - prandom_u32_max(256) + get_random_u8() | - E->inet_id = get_random_u32() + E->inet_id = get_random_u16() ) @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; identifier v; @@ - u16 v = get_random_u32(); + u16 v = get_random_u16(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u8; identifier v; @@ - u8 v = get_random_u32(); + u8 v = get_random_u8(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; u16 v; @@ - v = get_random_u32(); + v = get_random_u16(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u8; u8 v; @@ - v = get_random_u32(); + v = get_random_u8(); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Examine limits @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value < 256: coccinelle.RESULT = cocci.make_ident("get_random_u8") elif value < 65536: coccinelle.RESULT = cocci.make_ident("get_random_u16") else: print("Skipping large mask of %s" % (literal)) cocci.include_match(False) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; identifier add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + (RESULT() & LITERAL) Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11treewide: use prandom_u32_max() when possible, part 1Jason A. Donenfeld
Rather than incurring a division or requesting too many random bytes for the given range, use the prandom_u32_max() function, which only takes the minimum required bytes from the RNG and avoids divisions. This was done mechanically with this coccinelle script: @basic@ expression E; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u64; @@ ( - ((T)get_random_u32() % (E)) + prandom_u32_max(E) | - ((T)get_random_u32() & ((E) - 1)) + prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2) | - ((u64)(E) * get_random_u32() >> 32) + prandom_u32_max(E) | - ((T)get_random_u32() & ~PAGE_MASK) + prandom_u32_max(PAGE_SIZE) ) @multi_line@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; identifier RAND; expression E; @@ - RAND = get_random_u32(); ... when != RAND - RAND %= (E); + RAND = prandom_u32_max(E); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Add one to the literal. @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1: print("Skipping 0x%x for cleanup elsewhere" % (value)) cocci.include_match(False) elif value & (value + 1) != 0: print("Skipping 0x%x because it's not a power of two minus one" % (value)) cocci.include_match(False) elif literal.startswith('0x'): coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1)) else: coccinelle.RESULT = cocci.make_expr("%d" % (value + 1)) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; expression add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + prandom_u32_max(RESULT) @collapse_ret@ type T; identifier VAR; expression E; @@ { - T VAR; - VAR = (E); - return VAR; + return E; } @drop_var@ type T; identifier VAR; @@ { - T VAR; ... when != VAR } Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: KP Singh <kpsingh@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11wifi: rtw89: fix wrong bandwidth settings after scanPo-Hao Huang
Set channel in driver side to configure Tx power and channel index correctly after scan. Before this, beacons with bandwidth larger than 20M bandwidth will be dropped by mac80211 due to frequency mismatch. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221007045900.10823-2-pkshih@realtek.com
2022-10-11wifi: rtw89: correct 6 GHz scan behaviorPo-Hao Huang
Change active scan behavior to fit 6GHz requirements. There are many different rules on active scan between 6GHz and 2GHz/5GHz, so if the SSID is not specified, do fast passive scanning and limit number of probe requests we send for now until new firmware can support all rules. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221007045900.10823-1-pkshih@realtek.com
2022-10-11wifi: rtw89: 8852b: add chip_ops::set_channelPing-Ke Shih
set_channel is main function to configure channel and bandwidth for all layers, namely MAC, BB and RF. Additionally, MAC layer enables CCK rate checking to avoid wrong rate from driver. BB layer configures SCO (Sample Clock Offset) for CCK, TX gain error/offset, and reset baseband hardware circuit after all configurations done. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221005083212.45683-7-pkshih@realtek.com
2022-10-11wifi: rtw89: make generic functions to convert subband gain indexPing-Ke Shih
The gain tables use different domain index, so we need to convert the index from subband of chandef. Since these conversion functions can share with 8852b, make generic functions for further use. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221005083212.45683-6-pkshih@realtek.com
2022-10-11wifi: rtw89: 8852b: add HFC quota arraysPing-Ke Shih
HFC is short for HCI flow control. These arrays are used to set quota according to operating modes, which are SCC or download firmware. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221005083212.45683-5-pkshih@realtek.com
2022-10-11wifi: rtw89: 8852b: set proper configuration before loading NCTLPing-Ke Shih
Before loading RF NCTL table, we need to configure IQK/DPK clock and reset them, and then polling NCTL state ready. Since 8852BE needs additional one setting, add it by this patch. Also, give them proper names. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221005083212.45683-4-pkshih@realtek.com
2022-10-11wifi: rtw89: parse PHY status only when PPDU is to_selfEric Huang
Without this fix, some non-self packets are used to count CFO (center frequency offset), and average CFO has unstable variation. Then, it causes unexpected performance. Signed-off-by: Eric Huang <echuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221005083212.45683-3-pkshih@realtek.com
2022-10-11wifi: rtw89: coex: move chip_ops::btc_bt_aci_imp to a generic codeChing-Te Ku
This chunk is to set fixed BT LNA2 at level5 when WiFi/BT shared BTG RFC to improve BT anti-interference ability from adjacent channel. Since all chips use the same setting, remove chip_ops::btc_bt_aci_imp. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221005083212.45683-2-pkshih@realtek.com
2022-10-11wifi: ath11k: mac: fix reading 16 bytes from a region of size 0 warningKalle Valo
Linaro reported stringop-overread warnings in ath11k (this is one of many): drivers/net/wireless/ath/ath11k/mac.c:2238:29: error: 'ath11k_peer_assoc_h_he_limit' reading 16 bytes from a region of size 0 [-Werror=stringop-overread] My further investigation showed that these warnings happen on GCC 11.3 but not with GCC 12.2, and with only the kernel config Linaro provided: https://builds.tuxbuild.com/2F4W7nZHNx3T88RB0gaCZ9hBX6c/config I saw the same warnings both with arm64 and x86_64 builds and KASAN seems to be the reason triggering these warnings with GCC 11. Nobody else has reported this so this seems to be quite rare corner case. I don't know what specific commit started emitting this warning so I can't provide a Fixes tag. The function hasn't been touched for a year. I decided to workaround this by converting the pointer to a new array in stack, and then copying the data to the new array. It's only 16 bytes anyway and this is executed during association, so not in a hotpath. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.9 Reported-by: Linux Kernel Functional Testing <lkft@linaro.org> Link: https://lore.kernel.org/all/CA+G9fYsZ_qypa=jHY_dJ=tqX4515+qrV9n2SWXVDHve826nF7Q@mail.gmail.com/ Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221010160638.20152-1-kvalo@kernel.org
2022-10-11wifi: iwlwifi: mvm: fix double list_add at iwl_mvm_mac_wake_tx_queue (other ↵Jose Ignacio Tornos Martinez
cases) BUGs like this are still reproducible: [ 31.509616] list_add corruption. prev->next should be next (ffff8f8644242300), but was ffff8f86493fd300. (prev=ffff8f86493fd300). [ 31.521544] ------------[ cut here ]------------ [ 31.526248] kernel BUG at lib/list_debug.c:30! [ 31.530781] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 31.535831] CPU: 1 PID: 626 Comm: wpa_supplicant Not tainted 6.0.0+ #7 [ 31.542450] Hardware name: Dell Inc. Inspiron 660s/0478VN , BIOS A07 08/24/2012 [ 31.550484] RIP: 0010:__list_add_valid.cold+0x3a/0x5b [ 31.555537] Code: f2 4c 89 c1 48 89 fe 48 c7 c7 28 20 69 89 e8 4c e3 fd ff 0f 0b 48 89 d1 4c 89 c6 4c 89 ca 48 c7 c7 d0 1f 69 89 e8 35 e3 fd ff <0f> 0b 4c 89 c1 48 c7 c7 78 1f 69 89 e8 24 e3 fd ff 0f 0b 48 c7 c7 [ 31.574605] RSP: 0018:ffff9f6f00dc3748 EFLAGS: 00010286 [ 31.579990] RAX: 0000000000000075 RBX: ffff8f8644242080 RCX: 0000000000000000 [ 31.587155] RDX: 0000000000000201 RSI: ffffffff8967862d RDI: 00000000ffffffff [ 31.594482] RBP: ffff8f86493fd2e8 R08: 0000000000000000 R09: 00000000ffffdfff [ 31.601735] R10: ffff9f6f00dc3608 R11: ffffffff89f46128 R12: ffff8f86493fd300 [ 31.608986] R13: ffff8f86493fd300 R14: ffff8f8644242300 R15: ffff8f8643dd3f2c [ 31.616151] FS: 00007f3bb9a707c0(0000) GS:ffff8f865a300000(0000) knlGS:0000000000000000 [ 31.624447] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 31.630286] CR2: 00007fe3647d5600 CR3: 00000001125a6002 CR4: 00000000000606e0 [ 31.637539] Call Trace: [ 31.639936] <TASK> [ 31.642143] iwl_mvm_mac_wake_tx_queue+0x71/0x90 [iwlmvm] [ 31.647569] ieee80211_queue_skb+0x4b6/0x720 [mac80211] ... So, it is necessary to extend the applied solution with commit 14a3aacf517a9 ("iwlwifi: mvm: fix double list_add at iwl_mvm_mac_wake_tx_queue") to all other cases where the station queues are invalidated and the related lists are not emptied. Because, otherwise as before, if some new element is added later to the list in iwl_mvm_mac_wake_tx_queue, it can match with the old one and produce the same commented BUG. That is, in order to avoid this problem completely, we must also remove the related lists for the other cases when station queues are invalidated. Fixes: cfbc6c4c5b91c ("iwlwifi: mvm: support mac80211 TXQs model") Reported-by: Petr Stourac <pstourac@redhat.com> Tested-by: Petr Stourac <pstourac@redhat.com> Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221010081611.145027-1-jtornosm@redhat.com
2022-10-11wifi: mt76: fix rx checksum offload on mt7615/mt7915/mt7921Felix Fietkau
Checking the relevant rxd bits for the checksum information only indicates if the checksum verification was performed by the hardware and doesn't show actual checksum errors. Checksum errors are indicated in the info field of the DMA descriptor. Fix packets erroneously marked as CHECKSUM_UNNECESSARY by checking the extra bits as well. Those bits are only passed to the driver for MMIO devices at the moment, so limit checksum offload to those. Fixes: 2122dfbfd0bd ("mt76: mt7615: add rx checksum offload support") Fixes: 94244d2ea503 ("mt76: mt7915: add rx checksum offload support") Fixes: 0e75732764e8 ("mt76: mt7921: enable rx csum offload") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221005130824.23371-2-nbd@nbd.name
2022-10-11wifi: mt76: fix receiving LLC packets on mt7615/mt7915Felix Fietkau
When 802.3 decap offload is enabled, the hardware indicates header translation failure, whenever either the LLC-SNAP header was not found, or a VLAN header with an unregcognized tag is present. In that case, the hardware inserts a 2-byte length fields after the MAC addresses. For VLAN packets, this tag needs to be removed. However, for 802.3 LLC packets, the length bytes should be preserved, since there is no separate ethertype field in the data. This fixes an issue where the length field was omitted for LLC frames, causing them to be malformed after hardware decap. Fixes: 1eeff0b4c1a6 ("mt76: mt7915: fix decap offload corner case with 4-addr VLAN frames") Reported-by: Chad Monroe <chad.monroe@smartrg.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221005130824.23371-1-nbd@nbd.name
2022-10-11can: kvaser_usb_leaf: Fix CAN state after restartAnssi Hannula
can_restart() expects CMD_START_CHIP to set the error state to ERROR_ACTIVE as it calls netif_carrier_on() immediately afterwards. Otherwise the user may immediately trigger restart again and hit a BUG_ON() in can_restart(). Fix kvaser_usb_leaf set_mode(CMD_START_CHIP) to set the expected state. Cc: stable@vger.kernel.org Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010150829.199676-5-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-11can: kvaser_usb_leaf: Fix TX queue out of sync after restartAnssi Hannula
The TX queue seems to be implicitly flushed by the hardware during bus-off or bus-off recovery, but the driver does not reset the TX bookkeeping. Despite not resetting TX bookkeeping the driver still re-enables TX queue unconditionally, leading to "cannot find free context" / NETDEV_TX_BUSY errors if the TX queue was full at bus-off time. Fix that by resetting TX bookkeeping on CAN restart. Tested with 0bfd:0124 Kvaser Mini PCI Express 2xHS FW 4.18.778. Cc: stable@vger.kernel.org Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010150829.199676-4-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-11can: kvaser_usb: Fix use of uninitialized completionAnssi Hannula
flush_comp is initialized when CMD_FLUSH_QUEUE is sent to the device and completed when the device sends CMD_FLUSH_QUEUE_RESP. This causes completion of uninitialized completion if the device sends CMD_FLUSH_QUEUE_RESP before CMD_FLUSH_QUEUE is ever sent (e.g. as a response to a flush by a previously bound driver, or a misbehaving device). Fix that by initializing flush_comp in kvaser_usb_init_one() like the other completions. This issue is only triggerable after RX URBs have been set up, i.e. the interface has been opened at least once. Cc: stable@vger.kernel.org Fixes: aec5fb2268b7 ("can: kvaser_usb: Add support for Kvaser USB hydra family") Tested-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010150829.199676-3-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-11can: kvaser_usb_leaf: Fix overread with an invalid commandAnssi Hannula
For command events read from the device, kvaser_usb_leaf_read_bulk_callback() verifies that cmd->len does not exceed the size of the received data, but the actual kvaser_cmd handlers will happily read any kvaser_cmd fields without checking for cmd->len. This can cause an overread if the last cmd in the buffer is shorter than expected for the command type (with cmd->len showing the actual short size). Maximum overread seems to be 22 bytes (CMD_LEAF_LOG_MESSAGE), some of which are delivered to userspace as-is. Fix that by verifying the length of command before handling it. This issue can only occur after RX URBs have been set up, i.e. the interface has been opened at least once. Cc: stable@vger.kernel.org Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010150829.199676-2-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-11wifi: ath9k: verify the expected usb_endpoints are presentFedor Pchelkin
The bug arises when a USB device claims to be an ATH9K but doesn't have the expected endpoints. (In this case there was an interrupt endpoint where the driver expected a bulk endpoint.) The kernel needs to be able to handle such devices without getting an internal error. usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 3 PID: 500 at drivers/usb/core/urb.c:493 usb_submit_urb+0xce2/0x1430 drivers/usb/core/urb.c:493 Modules linked in: CPU: 3 PID: 500 Comm: kworker/3:2 Not tainted 5.10.135-syzkaller #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 Workqueue: events request_firmware_work_func RIP: 0010:usb_submit_urb+0xce2/0x1430 drivers/usb/core/urb.c:493 Call Trace: ath9k_hif_usb_alloc_rx_urbs drivers/net/wireless/ath/ath9k/hif_usb.c:908 [inline] ath9k_hif_usb_alloc_urbs+0x75e/0x1010 drivers/net/wireless/ath/ath9k/hif_usb.c:1019 ath9k_hif_usb_dev_init drivers/net/wireless/ath/ath9k/hif_usb.c:1109 [inline] ath9k_hif_usb_firmware_cb+0x142/0x530 drivers/net/wireless/ath/ath9k/hif_usb.c:1242 request_firmware_work_func+0x12e/0x240 drivers/base/firmware_loader/main.c:1097 process_one_work+0x9af/0x1600 kernel/workqueue.c:2279 worker_thread+0x61d/0x12f0 kernel/workqueue.c:2425 kthread+0x3b4/0x4a0 kernel/kthread.c:313 ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:299 Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221008211532.74583-1-pchelkin@ispras.ru
2022-10-11wifi: ath9k: hif_usb: Fix use-after-free in ath9k_hif_usb_reg_in_cb()Fedor Pchelkin
It is possible that skb is freed in ath9k_htc_rx_msg(), then usb_submit_urb() fails and we try to free skb again. It causes use-after-free bug. Moreover, if alloc_skb() fails, urb->context becomes NULL but rx_buf is not freed and there can be a memory leak. The patch removes unnecessary nskb and makes skb processing more clear: it is supposed that ath9k_htc_rx_msg() either frees old skb or passes its managing to another callback function. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 3deff76095c4 ("ath9k_htc: Increase URB count for REG_IN pipe") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221008114917.21404-1-pchelkin@ispras.ru
2022-10-11wifi: ath9k: Remove -Warray-bounds exceptionKees Cook
GCC-12 emits false positive -Warray-bounds warnings with CONFIG_UBSAN_SHIFT (-fsanitize=shift). This is fixed in GCC 13[1], and there is top-level Makefile logic to remove -Warray-bounds for known-bad GCC versions staring with commit f0be87c42cbd ("gcc-12: disable '-Warray-bounds' universally for now"). Remove the local work-around. [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105679 Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221006192054.1742982-1-keescook@chromium.org
2022-10-11wifi: ath9k: hif_usb: fix memory leak of urbs in ath9k_hif_usb_dealloc_tx_urbs()Fedor Pchelkin
Syzkaller reports a long-known leak of urbs in ath9k_hif_usb_dealloc_tx_urbs(). The cause of the leak is that usb_get_urb() is called but usb_free_urb() (or usb_put_urb()) is not called inside usb_kill_urb() as urb->dev or urb->ep fields have not been initialized and usb_kill_urb() returns immediately. The patch removes trying to kill urbs located in hif_dev->tx.tx_buf because hif_dev->tx.tx_buf is not supposed to contain urbs which are in pending state (the pending urbs are stored in hif_dev->tx.tx_pending). The tx.tx_lock is acquired so there should not be any changes in the list. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 03fb92a432ea ("ath9k: hif_usb: fix race condition between usb_get_urb() and usb_kill_anchored_urbs()") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220725151359.283704-1-pchelkin@ispras.ru
2022-10-10nfp: flower: fix incorrect struct type in GRE key_sizeLouis Peens
Looks like a copy-paste error sneaked in here at some point, causing the key_size for these tunnels to be calculated incorrectly. This size ends up being send to the firmware, causing unexpected behaviour in some cases. Fixes: 78a722af4ad9 ("nfp: flower: compile match for IPv6 tunnels") Reported-by: Chaoyong He <chaoyong.he@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20221007092132.218386-1-simon.horman@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-10net: sfp: fill also 5gbase-r and 25gbase-r modes in sfp_parse_support()Marek Behún
Fill in also 5gbase-r and 25gbase-r PHY interface modes into the phy_interface_t bitmap in sfp_parse_support(). Fixes: fd580c983031 ("net: sfp: augment SFP parsing with phy_interface_t bitmap") Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20221007084844.20352-1-kabel@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-10net: systemport: Enable all RX descriptors for SYSTEMPORT LiteFlorian Fainelli
The original commit that added support for the SYSTEMPORT Lite variant halved the number of RX descriptors due to a confusion between the number of descriptors and the number of descriptor words. There are 512 descriptor *words* which means 256 descriptors total. Fixes: 44a4524c54af ("net: systemport: Add support for SYSTEMPORT Lite") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20221007034201.4126054-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-10net: prestera: span: do not unbind things things that were never boundMaksym Glubokiy
Fixes: 13defa275eef ("net: marvell: prestera: Add matchall support") Signed-off-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu> Link: https://lore.kernel.org/r/20221006190600.881740-1-maksym.glubokiy@plvision.eu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-10Merge tag 'mm-stable-2022-10-08' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Yu Zhao's Multi-Gen LRU patches are here. They've been under test in linux-next for a couple of months without, to my knowledge, any negative reports (or any positive ones, come to that). - Also the Maple Tree from Liam Howlett. An overlapping range-based tree for vmas. It it apparently slightly more efficient in its own right, but is mainly targeted at enabling work to reduce mmap_lock contention. Liam has identified a number of other tree users in the kernel which could be beneficially onverted to mapletrees. Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat at [1]. This has yet to be addressed due to Liam's unfortunately timed vacation. He is now back and we'll get this fixed up. - Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses clang-generated instrumentation to detect used-unintialized bugs down to the single bit level. KMSAN keeps finding bugs. New ones, as well as the legacy ones. - Yang Shi adds a userspace mechanism (madvise) to induce a collapse of memory into THPs. - Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to support file/shmem-backed pages. - userfaultfd updates from Axel Rasmussen - zsmalloc cleanups from Alexey Romanov - cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and memory-failure - Huang Ying adds enhancements to NUMA balancing memory tiering mode's page promotion, with a new way of detecting hot pages. - memcg updates from Shakeel Butt: charging optimizations and reduced memory consumption. - memcg cleanups from Kairui Song. - memcg fixes and cleanups from Johannes Weiner. - Vishal Moola provides more folio conversions - Zhang Yi removed ll_rw_block() :( - migration enhancements from Peter Xu - migration error-path bugfixes from Huang Ying - Aneesh Kumar added ability for a device driver to alter the memory tiering promotion paths. For optimizations by PMEM drivers, DRM drivers, etc. - vma merging improvements from Jakub Matěn. - NUMA hinting cleanups from David Hildenbrand. - xu xin added aditional userspace visibility into KSM merging activity. - THP & KSM code consolidation from Qi Zheng. - more folio work from Matthew Wilcox. - KASAN updates from Andrey Konovalov. - DAMON cleanups from Kaixu Xia. - DAMON work from SeongJae Park: fixes, cleanups. - hugetlb sysfs cleanups from Muchun Song. - Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core. Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1] * tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits) hugetlb: allocate vma lock for all sharable vmas hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer hugetlb: fix vma lock handling during split vma and range unmapping mglru: mm/vmscan.c: fix imprecise comments mm/mglru: don't sync disk for each aging cycle mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol mm: memcontrol: use do_memsw_account() in a few more places mm: memcontrol: deprecate swapaccounting=0 mode mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled mm/secretmem: remove reduntant return value mm/hugetlb: add available_huge_pages() func mm: remove unused inline functions from include/linux/mm_inline.h selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd selftests/vm: add thp collapse shmem testing selftests/vm: add thp collapse file and tmpfs testing selftests/vm: modularize thp collapse memory operations selftests/vm: dedup THP helpers mm/khugepaged: add tracepoint to hpage_collapse_scan_file() mm/madvise: add file and shmem support to MADV_COLLAPSE ...
2022-10-10Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio updates from Michael Tsirkin: - 9k mtu perf improvements - vdpa feature provisioning - virtio blk SECURE ERASE support - fixes and cleanups all over the place * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_pci: don't try to use intxif pin is zero vDPA: conditionally read MTU and MAC in dev cfg space vDPA: fix spars cast warning in vdpa_dev_net_mq_config_fill vDPA: check virtio device features to detect MQ vDPA: check VIRTIO_NET_F_RSS for max_virtqueue_paris's presence vDPA: only report driver features if FEATURES_OK is set vDPA: allow userspace to query features of a vDPA device virtio_blk: add SECURE ERASE command support vp_vdpa: support feature provisioning vdpa_sim_net: support feature provisioning vdpa: device feature provisioning virtio-net: use mtu size as buffer length for big packets virtio-net: introduce and use helper function for guest gso support checks virtio: drop vp_legacy_set_queue_size virtio_ring: make vring_alloc_queue_packed prettier virtio_ring: split: Operators use unified style vhost: add __init/__exit annotations to module init/exit funcs
2022-10-10Merge tag 'v6.1-p1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Feed untrusted RNGs into /dev/random - Allow HWRNG sleeping to be more interruptible - Create lib/utils module - Setting private keys no longer required for akcipher - Remove tcrypt mode=1000 - Reorganised Kconfig entries Algorithms: - Load x86/sha512 based on CPU features - Add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher Drivers: - Add HACE crypto driver aspeed" * tag 'v6.1-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (124 commits) crypto: aspeed - Remove redundant dev_err call crypto: scatterwalk - Remove unused inline function scatterwalk_aligned() crypto: aead - Remove unused inline functions from aead crypto: bcm - Simplify obtain the name for cipher crypto: marvell/octeontx - use sysfs_emit() to instead of scnprintf() hwrng: core - start hwrng kthread also for untrusted sources crypto: zip - remove the unneeded result variable crypto: qat - add limit to linked list parsing crypto: octeontx2 - Remove the unneeded result variable crypto: ccp - Remove the unneeded result variable crypto: aspeed - Fix check for platform_get_irq() errors crypto: virtio - fix memory-leak crypto: cavium - prevent integer overflow loading firmware crypto: marvell/octeontx - prevent integer overflows crypto: aspeed - fix build error when only CRYPTO_DEV_ASPEED is enabled crypto: hisilicon/qm - fix the qos value initialization crypto: sun4i-ss - use DEFINE_SHOW_ATTRIBUTE to simplify sun4i_ss_debugfs crypto: tcrypt - add async speed test for aria cipher crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher crypto: aria - prepare generic module for optimized implementations ...
2022-10-10wifi: realtek: remove duplicated wake_tx_queueJohannes Berg
By accident, the previous patch duplicated the initialization of the wake_tx_queue callback. Fix that by removing the new initializations. Fixes: a790cc3a4fad ("wifi: mac80211: add wake_tx_queue callback to drivers") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-10wifi: ath9k: Make arrays prof_prio and channelmap static constColin Ian King
Don't populate the read-only arrays prof_prio and channelmap on the stack but instead make them static const. Also makes the object code a little smaller. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221005155558.320556-1-colin.i.king@gmail.com
2022-10-10wifi: ath11k: Fix spelling mistake "chnange" -> "change"Colin Ian King
There is a spelling mistake in an ath11k_dbg debug message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220928143834.35189-1-colin.i.king@gmail.com
2022-10-10wifi: ath11k: avoid deadlock during regulatory update in ath11k_regd_update()Wen Gong
Running this test in a loop it is easy to reproduce an rtnl deadlock: iw reg set FI ifconfig wlan0 down What happens is that thread A (workqueue) tries to update the regulatory: try to acquire the rtnl_lock of ar->regd_update_work rtnl_lock+0x17/0x20 ath11k_regd_update+0x15a/0x260 [ath11k] ath11k_regd_update_work+0x15/0x20 [ath11k] process_one_work+0x228/0x670 worker_thread+0x4d/0x440 kthread+0x16d/0x1b0 ret_from_fork+0x22/0x30 And thread B (ifconfig) tries to stop the interface: try to cancel_work_sync(&ar->regd_update_work) in ath11k_mac_op_stop(). ifconfig 3109 [003] 2414.232506: probe: ath11k_mac_op_stop: (ffffffffc14187a0) drv_stop+0x30 ([mac80211]) ieee80211_do_stop+0x5d2 ([mac80211]) ieee80211_stop+0x3e ([mac80211]) __dev_close_many+0x9e ([kernel.kallsyms]) __dev_change_flags+0xbe ([kernel.kallsyms]) dev_change_flags+0x23 ([kernel.kallsyms]) devinet_ioctl+0x5e3 ([kernel.kallsyms]) inet_ioctl+0x197 ([kernel.kallsyms]) sock_do_ioctl+0x4d ([kernel.kallsyms]) sock_ioctl+0x264 ([kernel.kallsyms]) __x64_sys_ioctl+0x92 ([kernel.kallsyms]) do_syscall_64+0x3a ([kernel.kallsyms]) entry_SYSCALL_64_after_hwframe+0x63 ([kernel.kallsyms]) __GI___ioctl+0x7 (/lib/x86_64-linux-gnu/libc-2.23.so) The sequence of deadlock is: 1. Thread B calls rtnl_lock(). 2. Thread A starts to run and calls rtnl_lock() from within ath11k_regd_update_work(), then enters wait state because the lock is owned by thread B. 3. Thread B continues to run and tries to call cancel_work_sync(&ar->regd_update_work), but thread A is in ath11k_regd_update_work() waiting for rtnl_lock(). So cancel_work_sync() forever waits for ath11k_regd_update_work() to finish and we have a deadlock. Fix this by switching from using regulatory_set_wiphy_regd_sync() to regulatory_set_wiphy_regd(). Now cfg80211 will schedule another workqueue which handles the locking on it's own. So the ath11k workqueue can simply exit without taking any locks, avoiding the deadlock. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> [kvalo: improve commit log] Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221006151747.13757-1-kvalo@kernel.org
2022-10-10Merge remote-tracking branch 'wireless/main' into wireless-nextJohannes Berg
Pull in wireless/main content since some new code would otherwise conflict with it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2026-09-06 22:36:49 +0000