summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2022-11-21net: microchip: sparx5: Add VCAP rule debugFS support for the VCAP APISteen Hegelund
This add support to show all rules in a VCAP instance. The information shown is: - rule id - address range - size - chain id - keyset name, subword size, register span - actionset name, subword size, register span - counter value - sticky bit (one bit width counter) Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-21net: microchip: sparx5: Add raw VCAP debugFS support for the VCAP APISteen Hegelund
This adds support for decoding VCAP rules with a minimum number of attributes: address, rule size and keyset. This allows for a quick inspection of a VCAP instance to determine if the rule are present and in the correct order. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-21net: microchip: sparx5: Add VCAP debugFS supportSteen Hegelund
Add a debugFS root folder for Sparx5 and add a vcap folder underneath with the VCAP instances and the ports Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-21net: microchip: sparx5: Ensure VCAP last_used_addr is set back to defaultSteen Hegelund
This ensures that the last_used_addr in a VCAP instance is returned to the default value when all rules have been deleted. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-21net: microchip: sparx5: Ensure L3 protocol has a default valueSteen Hegelund
This ensures that the l3_proto always have a valid value and that any dissector parsing errors causes the flower rule to be discarded. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-21net: microchip: sparx5: Fix return value in sparx5_tc_setup_qdisc_ets()Lu Wei
Function sparx5_tc_setup_qdisc_ets() always returns negative value because it return -EOPNOTSUPP in the end. This patch returns the rersult of sparx5_tc_ets_add() and sparx5_tc_ets_del() directly. Fixes: 211225428d65 ("net: microchip: sparx5: add support for offloading ets qdisc") Signed-off-by: Lu Wei <luwei32@huawei.com> Reviewed-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-21gve: Handle alternate miss completionsJeroen de Borst
The virtual NIC has 2 ways of indicating a miss-path completion. This handles the alternate. Signed-off-by: Jeroen de Borst <jeroendb@google.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-21gve: Adding a new AdminQ command to verify driverJeroen de Borst
Check whether the driver is compatible with the device presented. Signed-off-by: Jeroen de Borst <jeroendb@google.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-21net: axienet: set mdio clock according to bus-frequencyAndy Chiu
Some FPGA platforms have 80KHz MDIO bus frequency constraint when connecting Ethernet to its on-board external Marvell PHY. Thus, we may have to set MDIO clock according to the DT. Otherwise, use the default 2.5 MHz, as specified by 802.3, if the entry is not present. Also, change MAX_MDIO_FREQ to DEFAULT_MDIO_FREQ because we may actually set MDIO bus frequency higher than 2.5MHz if undelying devices support it. And properly disable the mdio bus clock in error path. Signed-off-by: Andy Chiu <andy.chiu@sifive.com> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-21net: axienet: Unexport and remove unused mdio functionsAndy Chiu
Both axienet_mdio_{enable/disable} functions are no longer used in xilinx_axienet_main.c due to 253761a0e61b7. And axienet_mdio_disable is not even used in the mdio.c. So unexport and remove them. Signed-off-by: Andy Chiu <andy.chiu@sifive.com> Reviewed-by: Greentime Hu <greentime.hu@sifive.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-21net: microchip: sparx5: prevent uninitialized variableDan Carpenter
Smatch complains that: drivers/net/ethernet/microchip/sparx5/sparx5_dcb.c:112 sparx5_dcb_apptrust_validate() error: uninitialized symbol 'match'. This would only happen if the: if (sparx5_dcb_apptrust_policies[i].nselectors != nselectors) condition is always true (they are not equal). The "nselectors" variable comes from dcbnl_ieee_set() and it is a number between 0-256. This seems like a probably a real bug. Fixes: 23f8382cd95d ("net: microchip: sparx5: add support for apptrust") Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-21net: ethernet: mtk_eth_soc: fix RSTCTRL_PPE{0,1} definitionsLorenzo Bianconi
Fix RSTCTRL_PPE0 and RSTCTRL_PPE1 register mask definitions for MTK_NETSYS_V2. Remove duplicated definitions. Fixes: 160d3a9b1929 ("net: ethernet: mtk_eth_soc: introduce MTK_NETSYS_V2 support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-21net: microchip: sparx5: kunit test: Fix compile warnings.Horatiu Vultur
When VCAP_KUNIT_TEST is enabled the following warnings are generated: drivers/net/ethernet/microchip/vcap/vcap_api_kunit.c:257:34: warning: Using plain integer as NULL pointer drivers/net/ethernet/microchip/vcap/vcap_api_kunit.c:258:41: warning: Using plain integer as NULL pointer drivers/net/ethernet/microchip/vcap/vcap_api_kunit.c:342:23: warning: Using plain integer as NULL pointer drivers/net/ethernet/microchip/vcap/vcap_api_kunit.c:359:23: warning: Using plain integer as NULL pointer drivers/net/ethernet/microchip/vcap/vcap_api_kunit.c:1327:34: warning: Using plain integer as NULL pointer drivers/net/ethernet/microchip/vcap/vcap_api_kunit.c:1328:41: warning: Using plain integer as NULL pointer Therefore fix this. Fixes: dccc30cc4906 ("net: microchip: sparx5: Add KUNIT test of counters and sorted rules") Fixes: c956b9b318d9 ("net: microchip: sparx5: Adding KUNIT tests of key/action values in VCAP API") Fixes: 67d637516fa9 ("net: microchip: sparx5: Adding KUNIT test for the VCAP API") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-21Merge 6.1-rc6 into driver-core-nextGreg Kroah-Hartman
We need the kernfs changes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-21nfp: implement xfrm callbacks and expose ipsec offload feature to upper layerHuanhuan Wang
Xfrm callbacks are implemented to offload SA info into firmware by mailbox. It supports 16K SA info in total. Expose ipsec offload feature to upper layer, this feature will signal the availability of the offload. Based on initial work of Norm Bagley <norman.bagley@netronome.com>. Signed-off-by: Huanhuan Wang <huanhuan.wang@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-21nfp: add framework to support ipsec offloadingHuanhuan Wang
A new metadata type and config structure are introduced to interact with firmware to support ipsec offloading. This feature relies on specific firmware that supports ipsec encrypt/decrypt by advertising related capability bit. The xfrm callbacks which interact with upper layer are implemented in the following patch. Based on initial work of Norm Bagley <norman.bagley@netronome.com>. Signed-off-by: Huanhuan Wang <huanhuan.wang@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-21nfp: extend capability and control wordsYinjun Zhang
Currently the 32-bit capability word is almost exhausted, now allocate some more words to support new features, and control word is also extended accordingly. Packet-type offloading is implemented in NIC application firmware, but it's not used in kernel driver, so reserve this bit here in case it's redefined for other use. Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-21cnic: don't pass bogus GFP_ flags to dma_alloc_coherentChristoph Hellwig
dma_alloc_coherent is an opaque allocator that only uses the GFP_ flags for allocation context control. Don't pass __GFP_COMP which makes no sense for an allocation that can't in any way be converted to a page pointer. Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-11-21bna: Avoid clashing function prototypesGustavo A. R. Silva
When built with Control Flow Integrity, function prototypes between caller and function declaration must match. These mismatches are visible at compile time with the new -Wcast-function-type-strict in Clang[1]. Fix a total of 227 warnings like these: drivers/net/ethernet/brocade/bna/bna_enet.c:519:3: warning: cast from 'void (*)(struct bna_ethport *, enum bna_ethport_event)' to 'bfa_fsm_t' (aka 'void (*)(void *, int)') converts to incompatible function type [-Wcast-function-type-strict] bfa_fsm_set_state(ethport, bna_ethport_sm_down); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The bna state machine code heavily overloads its state machine functions, so these have been separated into their own sets of structs, enums, typedefs, and helper functions. There are almost zero binary code changes, all seem to be related to header file line numbers changing, or the addition of the new stats helper. Important to mention is that while I was manually implementing this changes I was staring at this[2] patch from Kees Cook. Thanks, Kees. :) Link: https://github.com/KSPP/linux/issues/240 [1] https://reviews.llvm.org/D134831 [2] https://lore.kernel.org/linux-hardening/20220929230334.2109344-1-keescook@chromium.org/ Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-18net: ethernet: mediatek: ppe: assign per-port queues for offloaded trafficFelix Fietkau
Keeps traffic sent to the switch within link speed limits Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20221116080734.44013-7-nbd@nbd.name Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18net: ethernet: mtk_eth_soc: implement multi-queue support for per-port queuesFelix Fietkau
When sending traffic to multiple ports with different link speeds, queued packets to one port can drown out tx to other ports. In order to better handle transmission to multiple ports, use the hardware shaper feature to implement weighted fair queueing between ports. Weight and maximum rate are automatically adjusted based on the link speed of the port. The first 3 queues are unrestricted and reserved for non-DSA direct tx on GMAC ports. The following queues are automatically assigned by the MTK DSA tag driver based on the target port number. The PPE offload code configures the queues for offloaded traffic in the same way. This feature is only supported on devices supporting QDMA. All queues still share the same DMA ring and descriptor pool. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20221116080734.44013-5-nbd@nbd.name Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18net: ethernet: mtk_eth_soc: avoid port_mg assignment on MT7622 and newerFelix Fietkau
On newer chips, this field is unused and contains some bits related to queue assignment. Initialize it to 0 in those cases. Fix offload_version on MT7621 and MT7623, which still need the previous value. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20221116080734.44013-4-nbd@nbd.name Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18net: ethernet: mtk_eth_soc: drop packets to WDMA if the ring is fullFelix Fietkau
Improves handling of DMA ring overflow. Clarify other WDMA drop related comment. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20221116080734.44013-3-nbd@nbd.name Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18net: ethernet: mtk_eth_soc: increase tx ring size for QDMA devicesFelix Fietkau
In order to use the hardware traffic shaper feature, a larger tx ring is needed, especially for the scratch ring, which the hardware shaper uses to reorder packets. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20221116080734.44013-2-nbd@nbd.name Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18macsec: Fix invalid error code setYueHaibing
'ret' is defined twice in macsec_changelink(), when it is set in macsec_is_offloaded case, it will be invalid before return. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Saeed Mahameed <saeed@kernel.org> Reviewed-by: Antoine Tenart <atenart@kernel.org> Link: https://lore.kernel.org/r/20221118011249.48112-1-yuehaibing@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18bonding: fix ICMPv6 header handling when receiving IPv6 messagesHangbin Liu
Currently, we get icmp6hdr via function icmp6_hdr(), which needs the skb transport header to be set first. But there is no rule to ask driver set transport header before netif_receive_skb() and bond_handle_frame(). So we will not able to get correct icmp6hdr on some drivers. Fix this by using skb_header_pointer to get the IPv6 and ICMPV6 headers. Reported-by: Liang Li <liali@redhat.com> Fixes: 4e24be018eb9 ("bonding: add new parameter ns_targets") Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20221118034353.1736727-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18nfp: add port from netdev validation for EEPROM accessJaco Coetzee
Setting of the port flag `NFP_PORT_CHANGED`, introduced to ensure the correct reading of EEPROM data, causes a fatal kernel NULL pointer dereference in cases where the target netdev type cannot be determined. Add validation of port struct pointer before attempting to set the `NFP_PORT_CHANGED` flag. Return that operation is not supported if the netdev type cannot be determined. Fixes: 4ae97cae07e1 ("nfp: ethtool: fix the display error of `ethtool -m DEVNAME`") Signed-off-by: Jaco Coetzee <jaco.coetzee@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18nfp: fill splittable of devlink_port_attrs correctlyDiana Wang
The error is reflected in that it shows wrong splittable status of port when executing "devlink port show". The reason which leads the error is that the assigned operation of splittable is just a simple negation operation of split and it does not consider port lanes quantity. A splittable port should have several lanes that can be split(lanes quantity > 1). If without the judgement, it will show wrong message for some firmware, such as 2x25G, 2x10G. Fixes: a0f49b548652 ("devlink: Add a new devlink port split ability attribute and pass to netlink") Signed-off-by: Diana Wang <na.wang@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18net: pch_gbe: fix pci device refcount leak while module exitingYang Yingliang
As comment of pci_get_domain_bus_and_slot() says, it returns a pci device with refcount increment, when finish using it, the caller must decrement the reference count by calling pci_dev_put(). In pch_gbe_probe(), pci_get_domain_bus_and_slot() is called, so in error path in probe() and remove() function, pci_dev_put() should be called to avoid refcount leak. Compile tested only. Fixes: 1a0bdadb4e36 ("net/pch_gbe: supports eg20t ptp clock") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221117135148.301014-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18octeontx2-af: debugsfs: fix pci device refcount leakYang Yingliang
As comment of pci_get_domain_bus_and_slot() says, it returns a pci device with refcount increment, when finish using it, the caller must decrement the reference count by calling pci_dev_put(). So before returning from rvu_dbg_rvu_pf_cgx_map_display() or cgx_print_dmac_flt(), pci_dev_put() is called to avoid refcount leak. Fixes: dbc52debf95f ("octeontx2-af: Debugfs support for DMAC filters") Fixes: e2fb37303865 ("octeontx2-af: Display CGX, NIX and PF map in debugfs.") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221117124658.162409-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18net/qla3xxx: fix potential memleak in ql3xxx_send()Zhang Changzhong
The ql3xxx_send() returns NETDEV_TX_OK without freeing skb in error handling case, add dev_kfree_skb_any() to fix it. Fixes: bd36b0ac5d06 ("qla3xxx: Add support for Qlogic 4032 chip.") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1668675039-21138-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18net: mvpp2: fix possible invalid pointer dereferenceHui Tang
It will cause invalid pointer dereference to priv->cm3_base behind, if PTR_ERR(priv->cm3_base) in mvpp2_get_sram(). Fixes: e54ad1e01c00 ("net: mvpp2: add CM3 SRAM memory map") Signed-off-by: Hui Tang <tanghui20@huawei.com> Link: https://lore.kernel.org/r/20221117084032.101144-1-tanghui20@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18net/mlx4: Check retval of mlx4_bitmap_initPeter Kosyh
If mlx4_bitmap_init fails, mlx4_bitmap_alloc_range will dereference the NULL pointer (bitmap->table). Make sure, that mlx4_bitmap_alloc_range called in no error case. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: d57febe1a478 ("net/mlx4: Add A0 hybrid steering") Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Peter Kosyh <pkosyh@yandex.ru> Link: https://lore.kernel.org/r/20221117152806.278072-1-pkosyh@yandex.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18net: ethernet: mtk_eth_soc: fix error handling in mtk_open()Liu Jian
If mtk_start_dma() fails, invoke phylink_disconnect_phy() to perform cleanup. phylink_disconnect_phy() contains the put_device action. If phylink_disconnect_phy is not performed, the Kref of netdev will leak. Fixes: b8fc9f30821e ("net: ethernet: mediatek: Add basic PHYLINK support") Signed-off-by: Liu Jian <liujian56@huawei.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20221117111356.161547-1-liujian56@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18net: fman: remove reference to non-existing config PCSLukas Bulwahn
Commit a7c2a32e7f22 ("net: fman: memac: Use lynx pcs driver") makes the Freescale Data-Path Acceleration Architecture Frame Manager use lynx pcs driver by selecting PCS_LYNX. It also selects the non-existing config PCS as well, which has no effect. Remove this select to a non-existing config. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20221116102450.13928-1-lukas.bulwahn@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18iavf: Fix race condition between iavf_shutdown and iavf_removeSlawomir Laba
Fix a deadlock introduced by commit 974578017fc1 ("iavf: Add waiting so the port is initialized in remove") due to race condition between iavf_shutdown and iavf_remove, where iavf_remove stucks forever in while loop since iavf_shutdown already set __IAVF_REMOVE adapter state. Fix this by checking if the __IAVF_IN_REMOVE_TASK has already been set and return if so. Fixes: 974578017fc1 ("iavf: Add waiting so the port is initialized in remove") Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-18iavf: remove INITIAL_MAC_SET to allow gARP to work properlyStefan Assmann
IAVF_FLAG_INITIAL_MAC_SET prevents waiting on iavf_is_mac_set_handled() the first time the MAC is set. This breaks gratuitous ARP because the MAC address has not been updated yet when the gARP packet is sent out. Current behaviour: $ echo 1 > /sys/class/net/ens4f0/device/sriov_numvfs iavf 0000:88:02.0: MAC address: ee:04:19:14:ec:ea $ ip addr add 192.168.1.1/24 dev ens4f0v0 $ ip link set dev ens4f0v0 up $ echo 1 > /proc/sys/net/ipv4/conf/ens4f0v0/arp_notify $ ip link set ens4f0v0 addr 00:11:22:33:44:55 07:23:41.676611 ee:04:19:14:ec:ea > ff:ff:ff:ff:ff:ff, ethertype ARP (0x0806), length 42: Request who-has 192.168.1.1 tell 192.168.1.1, length 28 With IAVF_FLAG_INITIAL_MAC_SET removed: $ echo 1 > /sys/class/net/ens4f0/device/sriov_numvfs iavf 0000:88:02.0: MAC address: 3e:8a:16:a2:37:6d $ ip addr add 192.168.1.1/24 dev ens4f0v0 $ ip link set dev ens4f0v0 up $ echo 1 > /proc/sys/net/ipv4/conf/ens4f0v0/arp_notify $ ip link set ens4f0v0 addr 00:11:22:33:44:55 07:28:01.836608 00:11:22:33:44:55 > ff:ff:ff:ff:ff:ff, ethertype ARP (0x0806), length 42: Request who-has 192.168.1.1 tell 192.168.1.1, length 28 Fixes: 35a2443d0910 ("iavf: Add waiting for response from PF in set mac") Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-18iavf: Do not restart Tx queues after reset task failureIvan Vecera
After commit aa626da947e9 ("iavf: Detach device during reset task") the device is detached during reset task and re-attached at its end. The problem occurs when reset task fails because Tx queues are restarted during device re-attach and this leads later to a crash. To resolve this issue properly close the net device in cause of failure in reset task to avoid restarting of tx queues at the end. Also replace the hacky manipulation with IFF_UP flag by device close that clears properly both IFF_UP and __LINK_STATE_START flags. In these case iavf_close() does not do anything because the adapter state is already __IAVF_DOWN. Reproducer: 1) Run some Tx traffic (e.g. iperf3) over iavf interface 2) Set VF trusted / untrusted in loop [root@host ~]# cat repro.sh PF=enp65s0f0 IF=${PF}v0 ip link set up $IF ip addr add 192.168.0.2/24 dev $IF sleep 1 iperf3 -c 192.168.0.1 -t 600 --logfile /dev/null & sleep 2 while :; do ip link set $PF vf 0 trust on ip link set $PF vf 0 trust off done [root@host ~]# ./repro.sh Result: [ 2006.650969] iavf 0000:41:01.0: Failed to init adminq: -53 [ 2006.675662] ice 0000:41:00.0: VF 0 is now trusted [ 2006.689997] iavf 0000:41:01.0: Reset task did not complete, VF disabled [ 2006.696611] iavf 0000:41:01.0: failed to allocate resources during reinit [ 2006.703209] ice 0000:41:00.0: VF 0 is now untrusted [ 2006.737011] ice 0000:41:00.0: VF 0 is now trusted [ 2006.764536] ice 0000:41:00.0: VF 0 is now untrusted [ 2006.768919] BUG: kernel NULL pointer dereference, address: 0000000000000b4a [ 2006.776358] #PF: supervisor read access in kernel mode [ 2006.781488] #PF: error_code(0x0000) - not-present page [ 2006.786620] PGD 0 P4D 0 [ 2006.789152] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 2006.792903] ice 0000:41:00.0: VF 0 is now trusted [ 2006.793501] CPU: 4 PID: 0 Comm: swapper/4 Kdump: loaded Not tainted 6.1.0-rc3+ #2 [ 2006.805668] Hardware name: Abacus electric, s.r.o. - servis@abacus.cz Super Server/H12SSW-iN, BIOS 2.4 04/13/2022 [ 2006.815915] RIP: 0010:iavf_xmit_frame_ring+0x96/0xf70 [iavf] [ 2006.821028] ice 0000:41:00.0: VF 0 is now untrusted [ 2006.821572] Code: 48 83 c1 04 48 c1 e1 04 48 01 f9 48 83 c0 10 6b 50 f8 55 c1 ea 14 45 8d 64 14 01 48 39 c8 75 eb 41 83 fc 07 0f 8f e9 08 00 00 <0f> b7 45 4a 0f b7 55 48 41 8d 74 24 05 31 c9 66 39 d0 0f 86 da 00 [ 2006.845181] RSP: 0018:ffffb253004bc9e8 EFLAGS: 00010293 [ 2006.850397] RAX: ffff9d154de45b00 RBX: ffff9d15497d52e8 RCX: ffff9d154de45b00 [ 2006.856327] ice 0000:41:00.0: VF 0 is now trusted [ 2006.857523] RDX: 0000000000000000 RSI: 00000000000005a8 RDI: ffff9d154de45ac0 [ 2006.857525] RBP: 0000000000000b00 R08: ffff9d159cb010ac R09: 0000000000000001 [ 2006.857526] R10: ffff9d154de45940 R11: 0000000000000000 R12: 0000000000000002 [ 2006.883600] R13: ffff9d1770838dc0 R14: 0000000000000000 R15: ffffffffc07b8380 [ 2006.885840] ice 0000:41:00.0: VF 0 is now untrusted [ 2006.890725] FS: 0000000000000000(0000) GS:ffff9d248e900000(0000) knlGS:0000000000000000 [ 2006.890727] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2006.909419] CR2: 0000000000000b4a CR3: 0000000c39c10002 CR4: 0000000000770ee0 [ 2006.916543] PKRU: 55555554 [ 2006.918254] ice 0000:41:00.0: VF 0 is now trusted [ 2006.919248] Call Trace: [ 2006.919250] <IRQ> [ 2006.919252] dev_hard_start_xmit+0x9e/0x1f0 [ 2006.932587] sch_direct_xmit+0xa0/0x370 [ 2006.936424] __dev_queue_xmit+0x7af/0xd00 [ 2006.940429] ip_finish_output2+0x26c/0x540 [ 2006.944519] ip_output+0x71/0x110 [ 2006.947831] ? __ip_finish_output+0x2b0/0x2b0 [ 2006.952180] __ip_queue_xmit+0x16d/0x400 [ 2006.952721] ice 0000:41:00.0: VF 0 is now untrusted [ 2006.956098] __tcp_transmit_skb+0xa96/0xbf0 [ 2006.965148] __tcp_retransmit_skb+0x174/0x860 [ 2006.969499] ? cubictcp_cwnd_event+0x40/0x40 [ 2006.973769] tcp_retransmit_skb+0x14/0xb0 ... Fixes: aa626da947e9 ("iavf: Detach device during reset task") Cc: Jacob Keller <jacob.e.keller@intel.com> Cc: Patryk Piotrowski <patryk.piotrowski@intel.com> Cc: SlawomirX Laba <slawomirx.laba@intel.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-18iavf: Fix a crash during reset taskIvan Vecera
Recent commit aa626da947e9 ("iavf: Detach device during reset task") removed netif_tx_stop_all_queues() with an assumption that Tx queues are already stopped by netif_device_detach() in the beginning of reset task. This assumption is incorrect because during reset task a potential link event can start Tx queues again. Revert this change to fix this issue. Reproducer: 1. Run some Tx traffic (e.g. iperf3) over iavf interface 2. Switch MTU of this interface in a loop [root@host ~]# cat repro.sh IF=enp2s0f0v0 iperf3 -c 192.168.0.1 -t 600 --logfile /dev/null & sleep 2 while :; do for i in 1280 1500 2000 900 ; do ip link set $IF mtu $i sleep 2 done done [root@host ~]# ./repro.sh Result: [ 306.199917] iavf 0000:02:02.0 enp2s0f0v0: NIC Link is Up Speed is 40 Gbps Full Duplex [ 308.205944] iavf 0000:02:02.0 enp2s0f0v0: NIC Link is Up Speed is 40 Gbps Full Duplex [ 310.103223] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 310.110179] #PF: supervisor write access in kernel mode [ 310.115396] #PF: error_code(0x0002) - not-present page [ 310.120526] PGD 0 P4D 0 [ 310.123057] Oops: 0002 [#1] PREEMPT SMP NOPTI [ 310.127408] CPU: 24 PID: 183 Comm: kworker/u64:9 Kdump: loaded Not tainted 6.1.0-rc3+ #2 [ 310.135485] Hardware name: Abacus electric, s.r.o. - servis@abacus.cz Super Server/H12SSW-iN, BIOS 2.4 04/13/2022 [ 310.145728] Workqueue: iavf iavf_reset_task [iavf] [ 310.150520] RIP: 0010:iavf_xmit_frame_ring+0xd1/0xf70 [iavf] [ 310.156180] Code: d0 0f 86 da 00 00 00 83 e8 01 0f b7 fa 29 f8 01 c8 39 c6 0f 8f a0 08 00 00 48 8b 45 20 48 8d 14 92 bf 01 00 00 00 4c 8d 3c d0 <49> 89 5f 08 8b 43 70 66 41 89 7f 14 41 89 47 10 f6 83 82 00 00 00 [ 310.174918] RSP: 0018:ffffbb5f0082caa0 EFLAGS: 00010293 [ 310.180137] RAX: 0000000000000000 RBX: ffff92345471a6e8 RCX: 0000000000000200 [ 310.187259] RDX: 0000000000000000 RSI: 000000000000000d RDI: 0000000000000001 [ 310.194385] RBP: ffff92341d249000 R08: ffff92434987fcac R09: 0000000000000001 [ 310.201509] R10: 0000000011f683b9 R11: 0000000011f50641 R12: 0000000000000008 [ 310.208631] R13: ffff923447500000 R14: 0000000000000000 R15: 0000000000000000 [ 310.215756] FS: 0000000000000000(0000) GS:ffff92434ee00000(0000) knlGS:0000000000000000 [ 310.223835] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 310.229572] CR2: 0000000000000008 CR3: 0000000fbc210004 CR4: 0000000000770ee0 [ 310.236696] PKRU: 55555554 [ 310.239399] Call Trace: [ 310.241844] <IRQ> [ 310.243855] ? dst_alloc+0x5b/0xb0 [ 310.247260] dev_hard_start_xmit+0x9e/0x1f0 [ 310.251439] sch_direct_xmit+0xa0/0x370 [ 310.255276] __qdisc_run+0x13e/0x580 [ 310.258848] __dev_queue_xmit+0x431/0xd00 [ 310.262851] ? selinux_ip_postroute+0x147/0x3f0 [ 310.267377] ip_finish_output2+0x26c/0x540 Fixes: aa626da947e9 ("iavf: Detach device during reset task") Cc: Jacob Keller <jacob.e.keller@intel.com> Cc: Patryk Piotrowski <patryk.piotrowski@intel.com> Cc: SlawomirX Laba <slawomirx.laba@intel.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-18net: pch_gbe: fix potential memleak in pch_gbe_tx_queue()Wang Hai
In pch_gbe_xmit_frame(), NETDEV_TX_OK will be returned whether pch_gbe_tx_queue() sends data successfully or not, so pch_gbe_tx_queue() needs to free skb before returning. But pch_gbe_tx_queue() returns without freeing skb in case of dma_map_single() fails. Add dev_kfree_skb_any() to fix it. Fixes: 77555ee72282 ("net: Add Gigabit Ethernet driver of Topcliff PCH") Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-18net: dsa: sja1105: disallow C45 transactions on the BASE-TX MDIO busVladimir Oltean
You'd think people know that the internal 100BASE-TX PHY on the SJA1110 responds only to clause 22 MDIO transactions, but they don't :) When a clause 45 transaction is attempted, sja1105_base_tx_mdio_read() and sja1105_base_tx_mdio_write() don't expect "reg" to contain bit 30 set (MII_ADDR_C45) and pack this value into the SPI transaction buffer. But the field in the SPI buffer has a width smaller than 30 bits, so we see this confusing message from the packing() API rather than a proper rejection of C45 transactions: Call trace: dump_stack+0x1c/0x38 sja1105_pack+0xbc/0xc0 [sja1105] sja1105_xfer+0x114/0x2b0 [sja1105] sja1105_xfer_u32+0x44/0xf4 [sja1105] sja1105_base_tx_mdio_read+0x44/0x7c [sja1105] mdiobus_read+0x44/0x80 get_phy_c45_ids+0x70/0x234 get_phy_device+0x68/0x15c fwnode_mdiobus_register_phy+0x74/0x240 of_mdiobus_register+0x13c/0x380 sja1105_mdiobus_register+0x368/0x490 [sja1105] sja1105_setup+0x94/0x119c [sja1105] Cannot store 401d2405 inside bits 24-4 (would truncate) Fixes: 5a8f09748ee7 ("net: dsa: sja1105: register the MDIO buses for 100base-T1 and 100base-TX") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-18net: ethernet: mtk_eth_soc: remove cpu_relax in mtk_pending_workLorenzo Bianconi
Get rid of cpu_relax in mtk_pending_work routine since MTK_RESETTING is set only in mtk_pending_work() and it runs holding rtnl lock Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-18net: ethernet: mtk_eth_soc: do not overwrite mtu configuration running reset ↵Lorenzo Bianconi
routine Restore user configured MTU running mtk_hw_init() during tx timeout routine since it will be overwritten after a hw reset. Reported-by: Felix Fietkau <nbd@nbd.name> Fixes: 9ea4d311509f ("net: ethernet: mediatek: add the whole ethernet reset into the reset process") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-18net: ipa: avoid a null pointer dereferenceAlex Elder
Dan Carpenter reported that Smatch found an instance where a pointer which had previously been assumed could be null (as indicated by a null check) was later dereferenced without a similar check. In practice this doesn't lead to a problem because currently the pointers used are all non-null. Nevertheless this patch addresses the reported problem. In addition, I spotted another bug that arose in the same commit. When the command to initialize a routing table memory region was added, the number of entries computed for the non-hashed table was wrong (it ended up being a Boolean rather than the count intended). This bug is fixed here as well. Reported-by: Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/kernel-janitors/Y3OOP9dXK6oEydkf@kili Tested-by: Caleb Connolly <caleb.connolly@linaro.com> Fixes: 5cb76899fb47 ("net: ipa: reduce arguments to ipa_table_init_add()") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-18Merge tag 'wireless-next-2022-11-18' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.2 Second set of patches for v6.2. Only driver patches this time, nothing really special. Unused platform data support was removed from wl1251 and rtw89 got WoWLAN support. Major changes: ath11k * support configuring channel dwell time during scan rtw89 * new dynamic header firmware format support * Wake-over-WLAN support rtl8xxxu * enable IEEE80211_HW_SUPPORT_FAST_XMIT ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-18net: libwx: Fix dead code for duplicate checkJiawen Wu
Fix duplicate check on polling timeout. Fixes: 1efa9bfe58c5 ("net: libwx: Implement interaction with firmware") Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-18ipvlan: hold lower dev to avoid possible use-after-freeMahesh Bandewar
Recently syzkaller discovered the issue of disappearing lower device (NETDEV_UNREGISTER) while the virtual device (like macvlan) is still having it as a lower device. So it's just a matter of time similar discovery will be made for IPvlan device setup. So fixing it preemptively. Also while at it, add a refcount tracker. Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-18net: liquidio: simplify if expressionLeon Romanovsky
Fix the warning reported by kbuild: cocci warnings: (new ones prefixed by >>) >> drivers/net/ethernet/cavium/liquidio/lio_main.c:1797:54-56: WARNING !A || A && B is equivalent to !A || B drivers/net/ethernet/cavium/liquidio/lio_main.c:1827:54-56: WARNING !A || A && B is equivalent to !A || B Fixes: 8979f428a4af ("net: liquidio: release resources when liquidio driver open failed") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Saeed Mahameed <saeed@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-18net: phy: mscc: macsec: do not copy encryption keysAntoine Tenart
Following 1b16b3fdf675 ("net: phy: mscc: macsec: clear encryption keys when freeing a flow"), go one step further and instead of calling memzero_explicit on the key when freeing a flow, simply not copy the key in the first place as it's only used when a new flow is set up. Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-17net: ipa: permit GSI firmware loading to be skippedAlex Elder
Define a new value "skip" for the "qcom,gsi-loader" Device Tree property. If used, it indicates that neither the AP nor the modem need to load GSI firmware (because it has already been loaded--for example by the boot loader). Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2026-09-08 23:39:02 +0000