summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2022-12-21wifi: rtl8xxxu: Support new chip RTL8188EUJes Sorensen
This chip is found in cheap USB devices from TP-Link, D-Link, etc. Features: 2.4 GHz, b/g/n mode, 1T1R, 150 Mbps. Chip versions older than "I cut" need software rate control. That will be in the next commit. Until then MCS7 is used for all data frames. The "I cut" chips are not supported. They require different firmware and initialisation tables. Support can be added if someone has the hardware to test it. Co-developed-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Co-developed-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com> Co-developed-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/3aad60f6-23f9-81e8-c741-4bd51e99f423@gmail.com
2022-12-21wifi: rtl8xxxu: Define masks for cck_agc_rpt bitsBitterblue Smith
Define the constants CCK_AGC_RPT_LNA_IDX_MASK and CCK_AGC_RPT_VGA_IDX_MASK instead of using the same literals in four places. And get the bits from cck_agc_rpt using u8_get_bits(). It's a cosmetic change only. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/cfe79922-efdf-2ed0-7404-263915d19d82@gmail.com
2022-12-21wifi: rtl8xxxu: Make rtl8xxxu_load_firmware take const char*Bitterblue Smith
And pass const char* to it. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/361ceac1-cc73-605b-4b63-736bfce80833@gmail.com
2022-12-21wifi: rtl8xxxu: Deduplicate the efuse dumping codeBitterblue Smith
Every chip family except RTL8723AU has a copy of the efuse dumping code. Remove this and dump the efuse from a single place using a new function rtl8xxxu_dump_efuse(). Also, use print_hex_dump() to print the efuse instead of a loop and dev_info(). It shows the ASCII interpretation of the bytes, which is nice. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/2aa5200a-ee42-e064-16a1-672bed5708c6@gmail.com
2022-12-21wifi: rtw89: 8852c: rfk: refine AGC tuning flow of DPK for irregular PAChih-Kang Chang
Some hardware modules don't have good RF characteristic as regular. It could have RF PA characteristic that current code doesn't handle properly, and it runs into wrong DPK flow that doesn't complete DPK resulting in bad EVM. Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221216052939.9991-1-pkshih@realtek.com
2022-12-21wifi: rtw89: refine 6 GHz scanning dwell timePo-Hao Huang
Reduce dwell time to improve scan duration in 6 GHz. This is required for scan requests that does not include RNR parsing and does full channel scan. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221214091952.42792-1-pkshih@realtek.com
2022-12-21wifi: rtw89: 8852b: update BSS color mapping registerEric Huang
BSS color mapping register is different per IC, therefore, move this register to chip_info and update the setting function. Without this patch, wrong BSS color causes behavior abnormal, especially DL-OFDMA. Signed-off-by: Eric Huang <echuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221214091803.41293-1-pkshih@realtek.com
2022-12-21wifi: rtw89: coex: Change TDMA related logic to version separateChing-Te Ku
In order to make different version of TDMA and coming update in the future can all work well, use BTC format version to replace chip_id, because format could change for specific chip_id. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221217141745.43291-8-pkshih@realtek.com
2022-12-21wifi: rtw89: coex: refactor _chk_btc_report() to extend more featuresChing-Te Ku
Change the checking logic to switch case. Make the code more readable. There are more feature including to common code, in order to commit the following version of the features, switch case will make the logic more clearly. This patch did not change logic. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221217141745.43291-7-pkshih@realtek.com
2022-12-21wifi: rtw89: coex: Add v2 BT AFH report and related variableChing-Te Ku
Wi-Fi firmware update AFH report feature to version 2. If there is BT BLE device connect to DUT, the mechanism will send H2C to request BT BLE channel map, it will help to debug. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221217141745.43291-6-pkshih@realtek.com
2022-12-21wifi: rtw89: coex: Update BTC firmware report bitmap definitionChing-Te Ku
The different version use different bit definition to enable firmware report. WiFi firmware will report information from Bluetooth firmware or some Wi-Fi firmware mechanism/status to driver by these bits. To solve the difference, add a function to map bitmap and versions. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221217141745.43291-5-pkshih@realtek.com
2022-12-21wifi: rtw89: coex: Enable Bluetooth report when show debug infoChing-Te Ku
Ask WiFi firmware to send Bluetooth version report when we want to show Bluetooth debug info. If there is no request for debug log, driver will not enable the report. This modification can save some C2H/H2C resources. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221217141745.43291-4-pkshih@realtek.com
2022-12-21wifi: rtw89: coex: use new introduction BTC version formatPing-Ke Shih
Previous patch has added format version derived from firmware version. Use the format version, and remove constant version number from chip_info. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221217141745.43291-3-pkshih@realtek.com
2022-12-21wifi: rtw89: coex: add BTC format version derived from firmware versionPing-Ke Shih
Originally, each chip maintains its own format version followed firmware it uses. As new chip is added, firmware changes format of exchange messages to have rich information to handle more conditions. When old chip is going to upgrade firmware, it could use new format and driver needs to maintain compatibility with old firmware. So, add this version array to achieve this goal. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221217141745.43291-2-pkshih@realtek.com
2022-12-21Merge tag 'mt76-for-kvalo-2022-12-09' of https://github.com/nbd168/wirelessKalle Valo
mt76 patches for 6.2 - fixes - per-PHY LED support
2022-12-21Merge tag 'net-6.2-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf, netfilter and can. Current release - regressions: - bpf: synchronize dispatcher update with bpf_dispatcher_xdp_func - rxrpc: - fix security setting propagation - fix null-deref in rxrpc_unuse_local() - fix switched parameters in peer tracing Current release - new code bugs: - rxrpc: - fix I/O thread startup getting skipped - fix locking issues in rxrpc_put_peer_locked() - fix I/O thread stop - fix uninitialised variable in rxperf server - fix the return value of rxrpc_new_incoming_call() - microchip: vcap: fix initialization of value and mask - nfp: fix unaligned io read of capabilities word Previous releases - regressions: - stop in-kernel socket users from corrupting socket's task_frag - stream: purge sk_error_queue in sk_stream_kill_queues() - openvswitch: fix flow lookup to use unmasked key - dsa: mv88e6xxx: avoid reg_lock deadlock in mv88e6xxx_setup_port() - devlink: - hold region lock when flushing snapshots - protect devlink dump by the instance lock Previous releases - always broken: - bpf: - prevent leak of lsm program after failed attach - resolve fext program type when checking map compatibility - skbuff: account for tail adjustment during pull operations - macsec: fix net device access prior to holding a lock - bonding: switch back when high prio link up - netfilter: flowtable: really fix NAT IPv6 offload - enetc: avoid buffer leaks on xdp_do_redirect() failure - unix: fix race in SOCK_SEQPACKET's unix_dgram_sendmsg() - dsa: microchip: remove IRQF_TRIGGER_FALLING in request_threaded_irq" * tag 'net-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits) net: fec: check the return value of build_skb() net: simplify sk_page_frag Treewide: Stop corrupting socket's task_frag net: Introduce sk_use_task_frag in struct sock. mctp: Remove device type check at unregister net: dsa: microchip: remove IRQF_TRIGGER_FALLING in request_threaded_irq can: kvaser_usb: hydra: help gcc-13 to figure out cmd_len can: flexcan: avoid unbalanced pm_runtime_enable warning Documentation: devlink: add missing toc entry for etas_es58x devlink doc mctp: serial: Fix starting value for frame check sequence nfp: fix unaligned io read of capabilities word net: stream: purge sk_error_queue in sk_stream_kill_queues() myri10ge: Fix an error handling path in myri10ge_probe() net: microchip: vcap: Fix initialization of value and mask rxrpc: Fix the return value of rxrpc_new_incoming_call() rxrpc: rxperf: Fix uninitialised variable rxrpc: Fix I/O thread stop rxrpc: Fix switched parameters in peer tracing rxrpc: Fix locking issues in rxrpc_put_peer_locked() rxrpc: Fix I/O thread startup getting skipped ...
2022-12-20net: fec: check the return value of build_skb()Wei Fang
The build_skb might return a null pointer but there is no check on the return value in the fec_enet_rx_queue(). So a null pointer dereference might occur. To avoid this, we check the return value of build_skb. If the return value is a null pointer, the driver will recycle the page and update the statistic of ndev. Then jump to rx_processing_done to clear the status flags of the BD so that the hardware can recycle the BD. Fixes: 95698ff6177b ("net: fec: using page pool to manage RX buffers") Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Shenwei Wang <Shenwei.wang@nxp.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20221219022755.1047573-1-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-20wifi: ath9k: use proper statements in conditionalsArnd Bergmann
A previous cleanup patch accidentally broke some conditional expressions by replacing the safe "do {} while (0)" constructs with empty macros. gcc points this out when extra warnings are enabled: drivers/net/wireless/ath/ath9k/hif_usb.c: In function 'ath9k_skb_queue_complete': drivers/net/wireless/ath/ath9k/hif_usb.c:251:57: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body] 251 | TX_STAT_INC(hif_dev, skb_failed); Make both sets of macros proper expressions again. Fixes: d7fc76039b74 ("ath9k: htc: clean up statistics macros") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221215165553.1950307-1-arnd@kernel.org
2022-12-20wifi: mt76: mt7996: select CONFIG_RELAYArnd Bergmann
Without CONFIG_RELAY, the driver fails to link: ERROR: modpost: "relay_flush" [drivers/net/wireless/mediatek/mt76/mt7996/mt7996e.ko] undefined! ERROR: modpost: "relay_switch_subbuf" [drivers/net/wireless/mediatek/mt76/mt7996/mt7996e.ko] undefined! ERROR: modpost: "relay_open" [drivers/net/wireless/mediatek/mt76/mt7996/mt7996e.ko] undefined! ERROR: modpost: "relay_reset" [drivers/net/wireless/mediatek/mt76/mt7996/mt7996e.ko] undefined! ERROR: modpost: "relay_file_operations" [drivers/net/wireless/mediatek/mt76/mt7996/mt7996e.ko] undefined! The same change was done in mt7915 for the corresponding copy of the code. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") See-also: 988845c9361a ("mt76: mt7915: add support for passing chip/firmware debug data to user space") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221215163133.4152299-1-arnd@kernel.org
2022-12-20wifi: iwlwifi: fw: skip PPAG for JFJohannes Berg
For JF RFs we don't support PPAG, but many firmware images lie about it. Always skip support for JF to avoid firmware errors when sending the command. Reported-and-tested-by: Íñigo Huguet <ihuguet@redhat.com> Link: https://lore.kernel.org/linux-wireless/CACT4oufQsqHGp6bah2c4+jPn2wG1oZqY=UKa_TmPx=F6Lxng8Q@mail.gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221213225723.2a43415d8990.I9ac210740a45b41f1b2e15274e1daf4284f2808a@changeid
2022-12-19Merge tag 'linux-can-fixes-for-6.2-20221219' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2022-12-19 The first patch is by Vincent Mailhol and adds the etas_es58x devlink documentation to the index. Haibo Chen's patch for the flexcan driver fixes a unbalanced pm_runtime_enable warning. The last patch is by me, targets the kvaser_usb driver and fixes an error occurring with gcc-13. * tag 'linux-can-fixes-for-6.2-20221219' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: kvaser_usb: hydra: help gcc-13 to figure out cmd_len can: flexcan: avoid unbalanced pm_runtime_enable warning Documentation: devlink: add missing toc entry for etas_es58x devlink doc ==================== Link: https://lore.kernel.org/r/20221219155210.1143439-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-19net: dsa: microchip: remove IRQF_TRIGGER_FALLING in request_threaded_irqArun Ramadoss
KSZ swithes used interrupts for detecting the phy link up and down. During registering the interrupt handler, it used IRQF_TRIGGER_FALLING flag. But this flag has to be retrieved from device tree instead of hard coding in the driver, so removing the flag. Fixes: ff319a644829 ("net: dsa: microchip: move interrupt handling logic from lan937x to ksz_common") Reported-by: Christian Eggers <ceggers@arri.de> Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Link: https://lore.kernel.org/r/20221213101440.24667-1-arun.ramadoss@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-19can: kvaser_usb: hydra: help gcc-13 to figure out cmd_lenMarc Kleine-Budde
Debian's gcc-13 [1] throws the following error in kvaser_usb_hydra_cmd_size(): [1] gcc version 13.0.0 20221214 (experimental) [master r13-4693-g512098a3316] (Debian 13-20221214-1) | drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c:502:65: error: | array subscript ‘struct kvaser_cmd_ext[0]’ is partly outside array | bounds of ‘unsigned char[32]’ [-Werror=array-bounds=] | 502 | ret = le16_to_cpu(((struct kvaser_cmd_ext *)cmd)->len); kvaser_usb_hydra_cmd_size() returns the size of given command. It depends on the command number (cmd->header.cmd_no). For extended commands (cmd->header.cmd_no == CMD_EXTENDED) the above shown code is executed. Help gcc to recognize that this code path is not taken in all cases, by calling kvaser_usb_hydra_cmd_size() directly after assigning the command number. Fixes: aec5fb2268b7 ("can: kvaser_usb: Add support for Kvaser USB hydra family") Cc: Jimmy Assarsson <extja@kvaser.com> Cc: Anssi Hannula <anssi.hannula@bitwise.fi> Link: https://lore.kernel.org/all/20221219110104.1073881-1-mkl@pengutronix.de Tested-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-12-19can: flexcan: avoid unbalanced pm_runtime_enable warningHaibo Chen
When do suspend/resume, meet the following warning message: [ 30.028336] flexcan 425b0000.can: Unbalanced pm_runtime_enable! Balance the pm_runtime_force_suspend() and pm_runtime_force_resume(). Fixes: 8cb53b485f18 ("can: flexcan: add auto stop mode for IMX93 to support wakeup") Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/all/20221213094351.3023858-1-haibo.chen@nxp.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-12-19mctp: serial: Fix starting value for frame check sequenceJeremy Kerr
RFC1662 defines the start state for the crc16 FCS to be 0xffff, but we're currently starting at zero. This change uses the correct start state. We're only early in the adoption for the serial binding, so there aren't yet any other users to interface to. Fixes: a0c2ccd9b5ad ("mctp: Add MCTP-over-serial transport binding") Reported-by: Harsh Tyagi <harshtya@google.com> Tested-by: Harsh Tyagi <harshtya@google.com> Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-19nfp: fix unaligned io read of capabilities wordHuanhuan Wang
The address of 32-bit extend capability is not qword aligned, and may cause exception in some arch. Fixes: 484963ce9f1e ("nfp: extend capability and control words") Signed-off-by: Huanhuan Wang <huanhuan.wang@corigine.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-19myri10ge: Fix an error handling path in myri10ge_probe()Christophe JAILLET
Some memory allocated in myri10ge_probe_slices() is not released in the error handling path of myri10ge_probe(). Add the corresponding kfree(), as already done in the remove function. Fixes: 0dcffac1a329 ("myri10ge: add multislices support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-19net: microchip: vcap: Fix initialization of value and maskHoratiu Vultur
Fix the following smatch warning: smatch warnings: drivers/net/ethernet/microchip/vcap/vcap_api_debugfs.c:103 vcap_debugfs_show_rule_keyfield() error: uninitialized symbol 'value'. drivers/net/ethernet/microchip/vcap/vcap_api_debugfs.c:106 vcap_debugfs_show_rule_keyfield() error: uninitialized symbol 'mask'. In case the vcap field was VCAP_FIELD_U128 and the key was different than IP6_S/DIP then the value and mask were not initialized, therefore initialize them. Fixes: 610c32b2ce66 ("net: microchip: vcap: Add vcap_get_rule") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Saeed Mahameed <saeed@kernel.org> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-19hamradio: baycom_epp: Do not use x86-specific rdtsc()Borislav Petkov (AMD)
Use get_cycles() which is provided by pretty much every arch. The UML build works too because get_cycles() is a simple "return 0;" because the rdtsc() is optimized away there. Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-19net: alx: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Christoph Heiss
Using these macros allows to remove an #ifdef-guard on CONFIG_PM_SLEEP. No functional changes. Signed-off-by: Christoph Heiss <christoph@c8h4.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-18Merge branch '1GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-12-15 (igc) Muhammad Husaini Zulkifli says: This patch series fixes bugs for the Time-Sensitive Networking(TSN) Qbv Scheduling features. An overview of each patch series is given below: Patch 1: Using a first flag bit to schedule a packet to the next cycle if packet cannot fit in current Qbv cycle. Patch 2: Enable strict cycle for Qbv scheduling. Patch 3: Prevent user to set basetime less than zero during tc config. Patch 4: Allow the basetime enrollment with zero value. Patch 5: Calculate the new end time value to exclude the time interval that exceed the cycle time as user can specify the cycle time in tc config. Patch 6: Resolve the HW bugs where the gate is not fully closed. --- This contains the net patches from this original pull request: https://lore.kernel.org/netdev/20221205212414.3197525-1-anthony.l.nguyen@intel.com/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-16net: ethernet: ti: am65-cpsw: fix CONFIG_PM #ifdefArnd Bergmann
The #ifdef check is incorrect and leads to a warning: drivers/net/ethernet/ti/am65-cpsw-nuss.c:1679:13: error: 'am65_cpsw_nuss_remove_rx_chns' defined but not used [-Werror=unused-function] 1679 | static void am65_cpsw_nuss_remove_rx_chns(void *data) It's better to remove the #ifdef here and use the modern SYSTEM_SLEEP_PM_OPS() macro instead. Fixes: 24bc19b05f1f ("net: ethernet: ti: am65-cpsw: Add suspend/resume support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20221215163918.611609-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-16Merge tag 'driver-core-6.2-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of driver core and kernfs changes for 6.2-rc1. The "big" change in here is the addition of a new macro, container_of_const() that will preserve the "const-ness" of a pointer passed into it. The "problem" of the current container_of() macro is that if you pass in a "const *", out of it can comes a non-const pointer unless you specifically ask for it. For many usages, we want to preserve the "const" attribute by using the same call. For a specific example, this series changes the kobj_to_dev() macro to use it, allowing it to be used no matter what the const value is. This prevents every subsystem from having to declare 2 different individual macros (i.e. kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce the const value at build time, which having 2 macros would not do either. The driver for all of this have been discussions with the Rust kernel developers as to how to properly mark driver core, and kobject, objects as being "non-mutable". The changes to the kobject and driver core in this pull request are the result of that, as there are lots of paths where kobjects and device pointers are not modified at all, so marking them as "const" allows the compiler to enforce this. So, a nice side affect of the Rust development effort has been already to clean up the driver core code to be more obvious about object rules. All of this has been bike-shedded in quite a lot of detail on lkml with different names and implementations resulting in the tiny version we have in here, much better than my original proposal. Lots of subsystem maintainers have acked the changes as well. Other than this change, included in here are smaller stuff like: - kernfs fixes and updates to handle lock contention better - vmlinux.lds.h fixes and updates - sysfs and debugfs documentation updates - device property updates All of these have been in the linux-next tree for quite a while with no problems" * tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (58 commits) device property: Fix documentation for fwnode_get_next_parent() firmware_loader: fix up to_fw_sysfs() to preserve const usb.h: take advantage of container_of_const() device.h: move kobj_to_dev() to use container_of_const() container_of: add container_of_const() that preserves const-ness of the pointer driver core: fix up missed drivers/s390/char/hmcdrv_dev.c class.devnode() conversion. driver core: fix up missed scsi/cxlflash class.devnode() conversion. driver core: fix up some missing class.devnode() conversions. driver core: make struct class.devnode() take a const * driver core: make struct class.dev_uevent() take a const * cacheinfo: Remove of_node_put() for fw_token device property: Add a blank line in Kconfig of tests device property: Rename goto label to be more precise device property: Move PROPERTY_ENTRY_BOOL() a bit down device property: Get rid of __PROPERTY_ENTRY_ARRAY_EL*SIZE*() kernfs: fix all kernel-doc warnings and multiple typos driver core: pass a const * into of_device_uevent() kobject: kset_uevent_ops: make name() callback take a const * kobject: kset_uevent_ops: make filter() callback take a const * kobject: make kobject_namespace take a const * ...
2022-12-15net: dsa: mt7530: remove redundant assignmentDaniel Golle
Russell King correctly pointed out that the MAC_2500FD capability is already added for port 5 (if not in RGMII mode) and port 6 (which only supports SGMII) by mt7531_mac_port_get_caps. Remove the reduntant setting of this capability flag which was added by a previous commit. Fixes: e19de30d2080 ("net: dsa: mt7530: add support for in-band link status") Reported-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Link: https://lore.kernel.org/r/Y5qY7x6la5TxZxzX@makrotopia.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-15igc: Set Qbv start_time and end_time to end_time if not being configured in GCLTan Tee Min
The default setting of end_time minus start_time is whole 1 second. Thus, if it's not being configured in any GCL entry then it will be staying at original 1 second. This patch is changing the start_time and end_time to be end_time as if setting zero will be having weird HW behavior where the gate will not be fully closed. Fixes: ec50a9d437f0 ("igc: Add support for taprio offloading") Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-12-15igc: recalculate Qbv end_time by considering cycle timeTan Tee Min
Qbv users can specify a cycle time that is not equal to the total GCL intervals. Hence, recalculation is necessary here to exclude the time interval that exceeds the cycle time. As those GCL which exceeds the cycle time will be truncated. According to IEEE Std. 802.1Q-2018 section 8.6.9.2, once the end of the list is reached, it will switch to the END_OF_CYCLE state and leave the gates in the same state until the next cycle is started. Fixes: ec50a9d437f0 ("igc: Add support for taprio offloading") Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-12-15igc: allow BaseTime 0 enrollment for QbvTan Tee Min
Introduce qbv_enable flag in igc_adapter struct to store the Qbv on/off. So this allow the BaseTime to enroll with zero value. Fixes: 61572d5f8f91 ("igc: Simplify TSN flags handling") Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-12-15igc: Add checking for basetime less than zeroMuhammad Husaini Zulkifli
Using the tc qdisc command, the user can set basetime to any value. Checking should be done on the driver's side to prevent registering basetime values that are less than zero. Fixes: ec50a9d437f0 ("igc: Add support for taprio offloading") Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-12-15igc: Use strict cycles for Qbv schedulingVinicius Costa Gomes
Configuring strict cycle mode in the controller forces more well behaved transmissions when taprio is offloaded. When set this strict_cycle and strict_end, transmission is not enabled if the whole packet cannot be completed before end of the Qbv cycle. Fixes: 82faa9b79950 ("igc: Add support for ETF offloading") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Aravindhan Gunasekaran <aravindhan.gunasekaran@intel.com> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-12-15igc: Enhance Qbv scheduling by using first flag bitVinicius Costa Gomes
The I225 hardware has a limitation that packets can only be scheduled in the [0, cycle-time] interval. So, scheduling a packet to the start of the next cycle doesn't usually work. To overcome this, we use the Transmit Descriptor first flag to indicates that a packet should be the first packet (from a queue) in a cycle according to the section 7.5.2.9.3.4 The First Packet on Each QBV Cycle in Intel Discrete I225/6 User Manual. But this only works if there was any packet from that queue during the current cycle, to avoid this issue, we issue an empty packet if that's not the case. Also require one more descriptor to be available, to take into account the empty packet that might be issued. Test Setup: Talker: Use l2_tai to generate the launchtime into packet load. Listener: Use timedump.c to compute the delta between packet arrival and LaunchTime packet payload. Test Result: Before: 1666000610127300000,1666000610127300096,96,621273 1666000610127400000,1666000610127400192,192,621274 1666000610127500000,1666000610127500032,32,621275 1666000610127600000,1666000610127600128,128,621276 1666000610127700000,1666000610127700224,224,621277 1666000610127800000,1666000610127800064,64,621278 1666000610127900000,1666000610127900160,160,621279 1666000610128000000,1666000610128000000,0,621280 1666000610128100000,1666000610128100096,96,621281 1666000610128200000,1666000610128200192,192,621282 1666000610128300000,1666000610128300032,32,621283 1666000610128400000,1666000610128301056,-98944,621284 1666000610128500000,1666000610128302080,-197920,621285 1666000610128600000,1666000610128302848,-297152,621286 1666000610128700000,1666000610128303872,-396128,621287 1666000610128800000,1666000610128304896,-495104,621288 1666000610128900000,1666000610128305664,-594336,621289 1666000610129000000,1666000610128306688,-693312,621290 1666000610129100000,1666000610128307712,-792288,621291 1666000610129200000,1666000610128308480,-891520,621292 1666000610129300000,1666000610128309504,-990496,621293 1666000610129400000,1666000610128310528,-1089472,621294 1666000610129500000,1666000610128311296,-1188704,621295 1666000610129600000,1666000610128312320,-1287680,621296 1666000610129700000,1666000610128313344,-1386656,621297 1666000610129800000,1666000610128314112,-1485888,621298 1666000610129900000,1666000610128315136,-1584864,621299 1666000610130000000,1666000610128316160,-1683840,621300 1666000610130100000,1666000610128316928,-1783072,621301 1666000610130200000,1666000610128317952,-1882048,621302 1666000610130300000,1666000610128318976,-1981024,621303 1666000610130400000,1666000610128319744,-2080256,621304 1666000610130500000,1666000610128320768,-2179232,621305 1666000610130600000,1666000610128321792,-2278208,621306 1666000610130700000,1666000610128322816,-2377184,621307 1666000610130800000,1666000610128323584,-2476416,621308 1666000610130900000,1666000610128324608,-2575392,621309 1666000610131000000,1666000610128325632,-2674368,621310 1666000610131100000,1666000610128326400,-2773600,621311 1666000610131200000,1666000610128327424,-2872576,621312 1666000610131300000,1666000610128328448,-2971552,621313 1666000610131400000,1666000610128329216,-3070784,621314 1666000610131500000,1666000610131500032,32,621315 1666000610131600000,1666000610131600128,128,621316 1666000610131700000,1666000610131700224,224,621317 After: 1666073510646200000,1666073510646200064,64,2676462 1666073510646300000,1666073510646300160,160,2676463 1666073510646400000,1666073510646400256,256,2676464 1666073510646500000,1666073510646500096,96,2676465 1666073510646600000,1666073510646600192,192,2676466 1666073510646700000,1666073510646700032,32,2676467 1666073510646800000,1666073510646800128,128,2676468 1666073510646900000,1666073510646900224,224,2676469 1666073510647000000,1666073510647000064,64,2676470 1666073510647100000,1666073510647100160,160,2676471 1666073510647200000,1666073510647200256,256,2676472 1666073510647300000,1666073510647300096,96,2676473 1666073510647400000,1666073510647400192,192,2676474 1666073510647500000,1666073510647500032,32,2676475 1666073510647600000,1666073510647600128,128,2676476 1666073510647700000,1666073510647700224,224,2676477 1666073510647800000,1666073510647800064,64,2676478 1666073510647900000,1666073510647900160,160,2676479 1666073510648000000,1666073510648000000,0,2676480 1666073510648100000,1666073510648100096,96,2676481 1666073510648200000,1666073510648200192,192,2676482 1666073510648300000,1666073510648300032,32,2676483 1666073510648400000,1666073510648400128,128,2676484 1666073510648500000,1666073510648500224,224,2676485 1666073510648600000,1666073510648600064,64,2676486 1666073510648700000,1666073510648700160,160,2676487 1666073510648800000,1666073510648800000,0,2676488 1666073510648900000,1666073510648900096,96,2676489 1666073510649000000,1666073510649000192,192,2676490 1666073510649100000,1666073510649100032,32,2676491 1666073510649200000,1666073510649200128,128,2676492 1666073510649300000,1666073510649300224,224,2676493 1666073510649400000,1666073510649400064,64,2676494 1666073510649500000,1666073510649500160,160,2676495 1666073510649600000,1666073510649600000,0,2676496 1666073510649700000,1666073510649700096,96,2676497 1666073510649800000,1666073510649800192,192,2676498 1666073510649900000,1666073510649900032,32,2676499 1666073510650000000,1666073510650000128,128,2676500 Fixes: 82faa9b79950 ("igc: Add support for ETF offloading") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Co-developed-by: Aravindhan Gunasekaran <aravindhan.gunasekaran@intel.com> Signed-off-by: Aravindhan Gunasekaran <aravindhan.gunasekaran@intel.com> Co-developed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Signed-off-by: Malli C <mallikarjuna.chilakala@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-12-15xen: make remove callback of xen driver void returnedDawei Li
Since commit fc7a6209d571 ("bus: Make remove callback return void") forces bus_type::remove be void-returned, it doesn't make much sense for any bus based driver implementing remove callbalk to return non-void to its caller. This change is for xen bus based drivers. Acked-by: Juergen Gross <jgross@suse.com> Signed-off-by: Dawei Li <set_pte_at@outlook.com> Link: https://lore.kernel.org/r/TYCP286MB23238119AB4DF190997075C9CAE39@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM Signed-off-by: Juergen Gross <jgross@suse.com>
2022-12-15net: dsa: mv88e6xxx: avoid reg_lock deadlock in mv88e6xxx_setup_port()Vladimir Oltean
In the blamed commit, it was not noticed that one implementation of chip->info->ops->phylink_get_caps(), called by mv88e6xxx_get_caps(), may access hardware registers, and in doing so, it takes the mv88e6xxx_reg_lock(). Namely, this is mv88e6352_phylink_get_caps(). This is a problem because mv88e6xxx_get_caps(), apart from being a top-level function (method invoked by dsa_switch_ops), is now also directly called from mv88e6xxx_setup_port(), which runs under the mv88e6xxx_reg_lock() taken by mv88e6xxx_setup(). Therefore, when running on mv88e6352, the reg_lock would be acquired a second time and the system would deadlock on driver probe. The things that mv88e6xxx_setup() can compete with in terms of register access with are the IRQ handlers and MDIO bus operations registered by mv88e6xxx_probe(). So there is a real need to acquire the register lock. The register lock can, in principle, be dropped and re-acquired pretty much at will within the driver, as long as no operations that involve waiting for indirect access to complete (essentially, callers of mv88e6xxx_smi_direct_wait() and mv88e6xxx_wait_mask()) are interrupted with the lock released. However, I would guess that in mv88e6xxx_setup(), the critical section is kept open for such a long time just in order to optimize away multiple lock/unlock operations on the registers. We could, in principle, drop the reg_lock right before the mv88e6xxx_setup_port() -> mv88e6xxx_get_caps() call, and re-acquire it immediately afterwards. But this would look ugly, because mv88e6xxx_setup_port() would release a lock which it didn't acquire, but the caller did. A cleaner solution to this issue comes from the observation that struct mv88e6xxxx_ops methods generally assume they are called with the reg_lock already acquired. Whereas mv88e6352_phylink_get_caps() is more the exception rather than the norm, in that it acquires the lock itself. Let's enforce the same locking pattern/convention for chip->info->ops->phylink_get_caps() as well, and make mv88e6xxx_get_caps(), the top-level function, acquire the register lock explicitly, for this one implementation that will access registers for port 4 to work properly. This means that mv88e6xxx_setup_port() will no longer call the top-level function, but the low-level mv88e6xxx_ops method which expects the correct calling context (register lock held). Compared to chip->info->ops->phylink_get_caps(), mv88e6xxx_get_caps() also fixes up the supported_interfaces bitmap for internal ports, since that can be done generically and does not require per-switch knowledge. That's code which will no longer execute, however mv88e6xxx_setup_port() doesn't need that. It just needs to look at the mac_capabilities bitmap. Fixes: cc1049ccee20 ("net: dsa: mv88e6xxx: fix speed setting for CPU/DSA ports") Reported-by: Maksim Kiselev <bigunclemax@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Maksim Kiselev <bigunclemax@gmail.com> Link: https://lore.kernel.org/r/20221214110120.3368472-1-vladimir.oltean@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-12-15ravb: Fix "failed to switch device to config mode" message during unbindBiju Das
This patch fixes the error "ravb 11c20000.ethernet eth0: failed to switch device to config mode" during unbind. We are doing register access after pm_runtime_put_sync(). We usually do cleanup in reverse order of init. Currently in remove(), the "pm_runtime_put_sync" is not in reverse order. Probe reset_control_deassert(rstc); pm_runtime_enable(&pdev->dev); pm_runtime_get_sync(&pdev->dev); remove pm_runtime_put_sync(&pdev->dev); unregister_netdev(ndev); .. ravb_mdio_release(priv); pm_runtime_disable(&pdev->dev); Consider the call to unregister_netdev() unregister_netdev->unregister_netdevice_queue->rollback_registered_many that calls the below functions which access the registers after pm_runtime_put_sync() 1) ravb_get_stats 2) ravb_close Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Cc: stable@vger.kernel.org Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20221214105118.2495313-1-biju.das.jz@bp.renesas.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-12-15net: stmmac: fix errno when create_singlethread_workqueue() failsGaosheng Cui
We should set the return value to -ENOMEM explicitly when create_singlethread_workqueue() fails in stmmac_dvr_probe(), otherwise we'll lose the error value. Fixes: a137f3f27f92 ("net: stmmac: fix possible memory leak in stmmac_dvr_probe()") Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20221214080117.3514615-1-cuigaosheng1@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-12-15r6040: Fix kmemleak in probe and removeLi Zetao
There is a memory leaks reported by kmemleak: unreferenced object 0xffff888116111000 (size 2048): comm "modprobe", pid 817, jiffies 4294759745 (age 76.502s) hex dump (first 32 bytes): 00 c4 0a 04 81 88 ff ff 08 10 11 16 81 88 ff ff ................ 08 10 11 16 81 88 ff ff 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff815bcd82>] kmalloc_trace+0x22/0x60 [<ffffffff827e20ee>] phy_device_create+0x4e/0x90 [<ffffffff827e6072>] get_phy_device+0xd2/0x220 [<ffffffff827e7844>] mdiobus_scan+0xa4/0x2e0 [<ffffffff827e8be2>] __mdiobus_register+0x482/0x8b0 [<ffffffffa01f5d24>] r6040_init_one+0x714/0xd2c [r6040] ... The problem occurs in probe process as follows: r6040_init_one: mdiobus_register mdiobus_scan <- alloc and register phy_device, the reference count of phy_device is 3 r6040_mii_probe phy_connect <- connect to the first phy_device, so the reference count of the first phy_device is 4, others are 3 register_netdev <- fault inject succeeded, goto error handling path // error handling path err_out_mdio_unregister: mdiobus_unregister(lp->mii_bus); err_out_mdio: mdiobus_free(lp->mii_bus); <- the reference count of the first phy_device is 1, it is not released and other phy_devices are released // similarly, the remove process also has the same problem The root cause is traced to the phy_device is not disconnected when removes one r6040 device in r6040_remove_one() or on error handling path after r6040_mii probed successfully. In r6040_mii_probe(), a net ethernet device is connected to the first PHY device of mii_bus, in order to notify the connected driver when the link status changes, which is the default behavior of the PHY infrastructure to handle everything. Therefore the phy_device should be disconnected when removes one r6040 device or on error handling path. Fix it by adding phy_disconnect() when removes one r6040 device or on error handling path after r6040_mii probed successfully. Fixes: 3831861b4ad8 ("r6040: implement phylib") Signed-off-by: Li Zetao <lizetao1@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20221213125614.927754-1-lizetao1@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-12-14net: enetc: avoid buffer leaks on xdp_do_redirect() failureVladimir Oltean
Before enetc_clean_rx_ring_xdp() calls xdp_do_redirect(), each software BD in the RX ring between index orig_i and i can have one of 2 refcount values on its page. We are the owner of the current buffer that is being processed, so the refcount will be at least 1. If the current owner of the buffer at the diametrically opposed index in the RX ring (i.o.w, the other half of this page) has not yet called kfree(), this page's refcount could even be 2. enetc_page_reusable() in enetc_flip_rx_buff() tests for the page refcount against 1, and [ if it's 2 ] does not attempt to reuse it. But if enetc_flip_rx_buff() is put after the xdp_do_redirect() call, the page refcount can have one of 3 values. It can also be 0, if there is no owner of the other page half, and xdp_do_redirect() for this buffer ran so far that it triggered a flush of the devmap/cpumap bulk queue, and the consumers of those bulk queues also freed the buffer, all by the time xdp_do_redirect() returns the execution back to enetc. This is the reason why enetc_flip_rx_buff() is called before xdp_do_redirect(), but there is a big flaw with that reasoning: enetc_flip_rx_buff() will set rx_swbd->page = NULL on both sides of the enetc_page_reusable() branch, and if xdp_do_redirect() returns an error, we call enetc_xdp_free(), which does not deal gracefully with that. In fact, what happens is quite special. The page refcounts start as 1. enetc_flip_rx_buff() figures they're reusable, transfers these rx_swbd->page pointers to a different rx_swbd in enetc_reuse_page(), and bumps the refcount to 2. When xdp_do_redirect() later returns an error, we call the no-op enetc_xdp_free(), but we still haven't lost the reference to that page. A copy of it is still at rx_ring->next_to_alloc, but that has refcount 2 (and there are no concurrent owners of it in flight, to drop the refcount). What really kills the system is when we'll flip the rx_swbd->page the second time around. With an updated refcount of 2, the page will not be reusable and we'll really leak it. Then enetc_new_page() will have to allocate more pages, which will then eventually leak again on further errors from xdp_do_redirect(). The problem, summarized, is that we zeroize rx_swbd->page before we're completely done with it, and this makes it impossible for the error path to do something with it. Since the packet is potentially multi-buffer and therefore the rx_swbd->page is potentially an array, manual passing of the old pointers between enetc_flip_rx_buff() and enetc_xdp_free() is a bit difficult. For the sake of going with a simple solution, we accept the possibility of racing with xdp_do_redirect(), and we move the flip procedure to execute only on the redirect success path. By racing, I mean that the page may be deemed as not reusable by enetc (having a refcount of 0), but there will be no leak in that case, either. Once we accept that, we have something better to do with buffers on XDP_REDIRECT failure. Since we haven't performed half-page flipping yet, we won't, either (and this way, we can avoid enetc_xdp_free() completely, which gives the entire page to the slab allocator). Instead, we'll call enetc_xdp_drop(), which will recycle this half of the buffer back to the RX ring. Fixes: 9d2b68cc108d ("net: enetc: add support for XDP_REDIRECT") Suggested-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20221213001908.2347046-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-14Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma updates from Jason Gunthorpe: "Usual size of updates, a new driver, and most of the bulk focusing on rxe: - Usual typos, style, and language updates - Driver updates for mlx5, irdma, siw, rts, srp, hfi1, hns, erdma, mlx4, srp - Lots of RXE updates: * Improve reply error handling for bad MR operations * Code tidying * Debug printing uses common loggers * Remove half implemented RD related stuff * Support IBA's recently defined Atomic Write and Flush operations - erdma support for atomic operations - New driver 'mana' for Ethernet HW available in Azure VMs. This driver only supports DPDK" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (122 commits) IB/IPoIB: Fix queue count inconsistency for PKEY child interfaces RDMA: Add missed netdev_put() for the netdevice_tracker RDMA/rxe: Enable RDMA FLUSH capability for rxe device RDMA/cm: Make QP FLUSHABLE for supported device RDMA/rxe: Implement flush completion RDMA/rxe: Implement flush execution in responder side RDMA/rxe: Implement RC RDMA FLUSH service in requester side RDMA/rxe: Extend rxe packet format to support flush RDMA/rxe: Allow registering persistent flag for pmem MR only RDMA/rxe: Extend rxe user ABI to support flush RDMA: Extend RDMA kernel verbs ABI to support flush RDMA: Extend RDMA user ABI to support flush RDMA/rxe: Fix incorrect responder length checking RDMA/rxe: Fix oops with zero length reads RDMA/mlx5: Remove not-used IB_FLOW_SPEC_IB define RDMA/hns: Fix XRC caps on HIP08 RDMA/hns: Fix error code of CMD RDMA/hns: Fix page size cap from firmware RDMA/hns: Fix PBL page MTR find RDMA/hns: Fix AH attr queried by query_qp ...
2022-12-14wifi: ti: remove obsolete lines in the MakefileLukas Bulwahn
Commit 06463f6e98df ("wifi: wl1251: drop support for platform data") removes TI WiLink platform data, but leaves some dead lines in the Makefile. Remove these obsolete lines in the Makefile. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221209095937.17773-1-lukas.bulwahn@gmail.com
2022-12-14wifi: rtlwifi: Fix global-out-of-bounds bug in ↵Li Zetao
_rtl8812ae_phy_set_txpower_limit() There is a global-out-of-bounds reported by KASAN: BUG: KASAN: global-out-of-bounds in _rtl8812ae_eq_n_byte.part.0+0x3d/0x84 [rtl8821ae] Read of size 1 at addr ffffffffa0773c43 by task NetworkManager/411 CPU: 6 PID: 411 Comm: NetworkManager Tainted: G D 6.1.0-rc8+ #144 e15588508517267d37 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), Call Trace: <TASK> ... kasan_report+0xbb/0x1c0 _rtl8812ae_eq_n_byte.part.0+0x3d/0x84 [rtl8821ae] rtl8821ae_phy_bb_config.cold+0x346/0x641 [rtl8821ae] rtl8821ae_hw_init+0x1f5e/0x79b0 [rtl8821ae] ... </TASK> The root cause of the problem is that the comparison order of "prate_section" in _rtl8812ae_phy_set_txpower_limit() is wrong. The _rtl8812ae_eq_n_byte() is used to compare the first n bytes of the two strings from tail to head, which causes the problem. In the _rtl8812ae_phy_set_txpower_limit(), it was originally intended to meet this requirement by carefully designing the comparison order. For example, "pregulation" and "pbandwidth" are compared in order of length from small to large, first is 3 and last is 4. However, the comparison order of "prate_section" dose not obey such order requirement, therefore when "prate_section" is "HT", when comparing from tail to head, it will lead to access out of bounds in _rtl8812ae_eq_n_byte(). As mentioned above, the _rtl8812ae_eq_n_byte() has the same function as strcmp(), so just strcmp() is enough. Fix it by removing _rtl8812ae_eq_n_byte() and use strcmp() barely. Although it can be fixed by adjusting the comparison order of "prate_section", this may cause the value of "rate_section" to not be from 0 to 5. In addition, commit "21e4b0726dc6" not only moved driver from staging to regular tree, but also added setting txpower limit function during the driver config phase, so the problem was introduced by this commit. Fixes: 21e4b0726dc6 ("rtlwifi: rtl8821ae: Move driver from staging to regular tree") Signed-off-by: Li Zetao <lizetao1@huawei.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221212025812.1541311-1-lizetao1@huawei.com
2022-12-14wifi: rtw89: 8852c: rfk: recover RX DCK failurePing-Ke Shih
RX DCK stands for RX DC calibration that affects CCA, so abnormal calibration values resulted from calibration failure can cause TX get stuck. To solve this, redo calibration if result is bad (over thresholds). When retry count is over, do recovery that sets high gain fields of RX DCK results from low gain fields. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221209020940.9573-4-pkshih@realtek.com
generated by cgit v1.2.3 (git 2.25.1) at 2026-09-06 23:21:34 +0000