summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2024-04-22wifi: ath12k: fix out-of-bound access of qmi_invoke_handler()Karthikeyan Kathirvel
Currently, there is no terminator entry for ath12k_qmi_msg_handlers hence facing below KASAN warning, ================================================================== BUG: KASAN: global-out-of-bounds in qmi_invoke_handler+0xa4/0x148 Read of size 8 at addr ffffffd00a6428d8 by task kworker/u8:2/1273 CPU: 0 PID: 1273 Comm: kworker/u8:2 Not tainted 5.4.213 #0 Workqueue: qmi_msg_handler qmi_data_ready_work Call trace: dump_backtrace+0x0/0x20c show_stack+0x14/0x1c dump_stack+0xe0/0x138 print_address_description.isra.5+0x30/0x330 __kasan_report+0x16c/0x1bc kasan_report+0xc/0x14 __asan_load8+0xa8/0xb0 qmi_invoke_handler+0xa4/0x148 qmi_handle_message+0x18c/0x1bc qmi_data_ready_work+0x4ec/0x528 process_one_work+0x2c0/0x440 worker_thread+0x324/0x4b8 kthread+0x210/0x228 ret_from_fork+0x10/0x18 The address belongs to the variable: ath12k_mac_mon_status_filter_default+0x4bd8/0xfffffffffffe2300 [ath12k] [...] ================================================================== Add a dummy terminator entry at the end to assist the qmi_invoke_handler() in traversing up to the terminator entry without accessing an out-of-boundary index. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240416080234.2882725-1-quic_kathirve@quicinc.com
2024-04-22wifi: ath12k: Refactor data path cmem initKarthikeyan Periyasamy
Move the data path Tx and Rx descriptor primary page table CMEM configuration into a helper function. This will make the code more scalable for configuring partner device in support of multi-device MLO. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240411102226.4045323-5-quic_periyasa@quicinc.com
2024-04-22wifi: ath12k: displace the Tx and Rx descriptor in cookie conversion tableKarthikeyan Periyasamy
In the hardware cookie conversion table configuration, place the Rx descriptor at the end. This will allow for easier addition of partner device Rx descriptors in the future to support multi-device MLO. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240411102226.4045323-4-quic_periyasa@quicinc.com
2024-04-22wifi: ath12k: Refactor the hardware cookie conversion initKarthikeyan Periyasamy
Currently, the Rx descriptor is placed before the Tx descriptor in the primary page table of the hardware cookie conversion configuration. The Tx and Rx descriptor offsets are implicitly hardcoded. To allow for easy displacement of Tx and Rx descriptors, introduce Tx and Rx offset based cookie conversion initializationi. Additionally, should consider validating the respective offset ranges while retrieving the Tx and Rx descriptors. This change will be utilize by the next patch in the series. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240411102226.4045323-3-quic_periyasa@quicinc.com
2024-04-22wifi: ath12k: avoid redundant code in Rx cookie conversion initKarthikeyan Periyasamy
Currently, in the Rx data path cookie conversion initialization procedure, the primary page table index (ppt_idx) is computed within the secondary page table iteration. However this is invariant, and hence the ppt_idx should be calculated outside of the iteration to avoid repeated execution of the statement. Found in code review. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240411102226.4045323-2-quic_periyasa@quicinc.com
2024-04-22octeontx2-pf: Add support for offload tc with skbedit mark actionGeetha sowjanya
Support offloading of skbedit mark action. For example, to mark with 0x0008, with dest ip 60.60.60.2 on eth2 interface: # tc qdisc add dev eth2 ingress # tc filter add dev eth2 ingress protocol ip flower \ dst_ip 60.60.60.2 action skbedit mark 0x0008 skip_sw Signed-off-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-22net: ethernet: ti: am65-cpsw: Fix xdp_rxq error for disabled portJulien Panis
When an ethX port is disabled in the device tree, an error is returned by xdp_rxq_info_reg() function while transitioning the CPSW device to the up state. The message 'Missing net_device from driver' is output. This patch fixes the issue by registering xdp_rxq info only if ethX port is enabled (i.e. ndev pointer is not NULL). Fixes: 8acacc40f733 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support") Link: https://lore.kernel.org/all/260d258f-87a1-4aac-8883-aab4746b32d8@ti.com/ Reported-by: Siddharth Vadapalli <s-vadapalli@ti.com> Closes: https://gist.github.com/Siddharth-Vadapalli-at-TI/5ed0e436606001c247a7da664f75edee Signed-off-by: Julien Panis <jpanis@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-22sysctl: treewide: constify ctl_table_header::ctl_table_argThomas Weißschuh
To be able to constify instances of struct ctl_tables it is necessary to remove ways through which non-const versions are exposed from the sysctl core. One of these is the ctl_table_arg member of struct ctl_table_header. Constify this reference as a prerequisite for the full constification of struct ctl_table instances. No functional change. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-22net: usb: qmi_wwan: add Telit FN920C04 compositionsDaniele Palmas
Add the following Telit FN920C04 compositions: 0x10a0: rmnet + tty (AT/NMEA) + tty (AT) + tty (diag) T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a0 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10a4: rmnet + tty (AT) + tty (AT) + tty (diag) T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a4 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10a9: rmnet + tty (AT) + tty (diag) + DPL (data packet logging) + adb T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a9 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-22wifi: iwlwifi: mvm: fix link ID managementJohannes Berg
On older (pre-MLD API) devices, we started also calling iwl_mvm_set_link_mapping()/iwl_mvm_unset_link_mapping(), but of course not also iwl_mvm_remove_link(). Since the link ID was only released in iwl_mvm_remove_link() this causes us to run out of FW link IDs very quickly. Fix it by releasing the link ID correctly. Fixes: a8b5d4809b50 ("wifi: iwlwifi: mvm: Configure the link mapping for non-MLD FW") Link: https://msgid.link/20240420154435.dce72db5d5e3.Ic40b454b24f1c7b380a1eedf67455d9cf2f58541@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-22wifi: rtl8xxxu: enable MFP support with security flag of RX descriptorMartin Kaistra
In order to connect to networks which require 802.11w, add the MFP_CAPABLE flag and let mac80211 do the actual crypto in software. When a robust management frame is received, rx_dec->swdec is not set, even though the HW did not decrypt it. Extend the check and don't set RX_FLAG_DECRYPTED for these frames in order to use SW decryption. Use the security flag in the RX descriptor for this purpose, like it is done in the rtw88 driver. Cc: stable@vger.kernel.org Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240418071813.1883174-3-martin.kaistra@linutronix.de
2024-04-22Revert "wifi: rtl8xxxu: enable MFP support"Martin Kaistra
This reverts commit 77f5924fc41c243e907c80ce2576902d3a9cb336. There is a more elegant solution to check for not decrypted frames, which is to check the security flag in the RX descriptor. Revert commit 77f5924fc41c ("wifi: rtl8xxxu: enable MFP support") in favor of this to be able to send it to stable. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240418071813.1883174-2-martin.kaistra@linutronix.de
2024-04-22wifi: rtw88: suppress messages of failed to flush queuePing-Ke Shih
Driver throws messages when scanning with a lot of traffic, because packets in TX buffer can not be transmitted in time. Since this is a common occurrence, change them to debug message with special debug mask that developers can turn on this mask by default for further analysis. Cc: Lewis Robbins <lewis.robbins2@gmail.com> Tested-by: Lewis Robbins <lewis.robbins2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240418002916.5965-1-pkshih@realtek.com
2024-04-22wifi: rtw89: 8922a: fix argument to hal_reset in bb_cfg_txrx_pathZong-Zhe Yang
When hal_reset on MAC_1/PHY_1, we should pass tx_en1 instead of tx_en0. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240417090058.42663-1-pkshih@realtek.com
2024-04-22wifi: rtw89: set WIPHY_FLAG_DISABLE_WEXT before MLOZong-Zhe Yang
We will support MLO on 802.11be chip, e.g. RTL8922A, in the future. At that time being, we will set WIPHY_FLAG_SUPPORTS_MLO according to chip info and FW features at runtime. But, with WIPHY_FLAG_SUPPORTS_MLO flag, cfg80211 will disable WEXT. In case inconsistent user experience, if 802.11be chip, we disable WEXT uniformly from now on. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240417090050.42607-1-pkshih@realtek.com
2024-04-19mlxsw: pci: Fix driver initialization with old firmwareIdo Schimmel
The driver queries the Management Capabilities Mask (MCAM) register during initialization to understand if a new and deeper reset flow is supported. However, not all firmware versions support this register, leading to the driver failing to load. Fix by treating an error in the register query as an indication that the feature is not supported. Fixes: f257c73e5356 ("mlxsw: pci: Add support for new reset flow") Reported-by: Tim 'mithro' Ansell <me@mith.ro> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/ee968c49d53bac96a4c66d1b09ebbd097d81aca5.1713446092.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-19mlxsw: core_env: Fix driver initialization with old firmwareIdo Schimmel
The driver queries the Management Capabilities Mask (MCAM) register during initialization to understand if it can read up to 128 bytes from transceiver modules. However, not all firmware versions support this register, leading to the driver failing to load. Fix by treating an error in the register query as an indication that the feature is not supported. Fixes: 1f4aea1f72da ("mlxsw: core_env: Read transceiver module EEPROM in 128 bytes chunks") Reported-by: Tim 'mithro' Ansell <me@mith.ro> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/0afa8b2e8bac178f5f88211344429176dcc72281.1713446092.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-19mlxsw: core: Unregister EMAD trap using FORWARD actionIdo Schimmel
The device's manual (PRM - Programmer's Reference Manual) classifies the trap that is used to deliver EMAD responses as an "event trap". Among other things, it means that the only actions that can be associated with the trap are TRAP and FORWARD (NOP). Currently, during driver de-initialization the driver unregisters the trap by setting its action to DISCARD, which violates the above guideline. Future firmware versions will prevent such misuses by returning an error. This does not prevent the driver from working, but an error will be printed to the kernel log during module removal / devlink reload: mlxsw_spectrum 0000:03:00.0: Reg cmd access status failed (status=7(bad parameter)) mlxsw_spectrum 0000:03:00.0: Reg cmd access failed (reg_id=7003(hpkt),type=write) Suppress the error message by aligning the driver to the manual and use a FORWARD (NOP) action when unregistering the trap. Fixes: 4ec14b7634b2 ("mlxsw: Add interface to access registers and process events") Cc: Jiri Pirko <jiri@resnulli.us> Cc: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/753a89e14008fde08cb4a2c1e5f537b81d8eb2d6.1713446092.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-19net: bcmasp: fix memory leak when bringing down interfaceJustin Chen
When bringing down the TX rings we flush the rings but forget to reclaimed the flushed packets. This leads to a memory leak since we do not free the dma mapped buffers. This also leads to tx control block corruption when bringing down the interface for power management. Fixes: 490cb412007d ("net: bcmasp: Add support for ASP2.0 Ethernet controller") Signed-off-by: Justin Chen <justin.chen@broadcom.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240418180541.2271719-1-justin.chen@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-19vxlan: drop packets from invalid src-addressDavid Bauer
The VXLAN driver currently does not check if the inner layer2 source-address is valid. In case source-address snooping/learning is enabled, a entry in the FDB for the invalid address is created with the layer3 address of the tunnel endpoint. If the frame happens to have a non-unicast address set, all this non-unicast traffic is subsequently not flooded to the tunnel network but sent to the learnt host in the FDB. To make matters worse, this FDB entry does not expire. Apply the same filtering for packets as it is done for bridges. This not only drops these invalid packets but avoids them from being learnt into the FDB. Fixes: d342894c5d2f ("vxlan: virtual extensible lan") Suggested-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David Bauer <mail@david-bauer.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-19net: dsa: xrs700x: fix missing initialisation of ds->phylink_mac_opsRussell King (Oracle)
The kernel build bot identified the following mistake in the recently merged 860a9bed2651 ("net: dsa: xrs700x: provide own phylink MAC operations") patch: drivers/net/dsa/xrs700x/xrs700x.c:714:37: warning: 'xrs700x_phylink_mac_ops' defined but not used [-Wunused-const-variable=] 714 | static const struct phylink_mac_ops xrs700x_phylink_mac_ops = { | ^~~~~~~~~~~~~~~~~~~~~~~ Fix the omitted assignment of ds->phylink_mac_ops. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-19net: libwx: fix alloc msix vectors failedDuanqiang Wen
driver needs queue msix vectors and one misc irq vector, but only queue vectors need irq affinity. when num_online_cpus is less than chip max msix vectors, driver will acquire (num_online_cpus + 1) vecotrs, and call pci_alloc_irq_vectors_affinity functions with affinity params without setting pre_vectors or post_vectors, it will cause return error code -ENOSPC. Misc irq vector is vector 0, driver need to set affinity params .pre_vectors = 1. Fixes: 3f703186113f ("net: libwx: Add irq flow functions") Signed-off-by: Duanqiang Wen <duanqiangwen@net-swift.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-19wifi: mac80211_hwsim: Use wider regulatory for custom for 6GHz testsChaitanya Tata
If a custom regulatory is being used, use the 6GHz regulatory for testing 6GHz channels. Signed-off-by: Chaitanya Tata <Chaitanya.Tk17@gmail.com> Link: https://msgid.link/20240417074022.423432-1-Chaitanya.Tk17@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: Don't allow EMLSR when the RSSI is lowMiri Korenblit
If the RSSI of a link is low enough, don't use it for EMLSR. If EMLSR is already active and the RSSI of one of the links gets low, exit EMLSR by deactivating that link. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240416134215.73263c000263.Ieb2b18855a2719b5e18ad2fa8a3e855ca4e23938@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: disable EMLSR when we suspend with wowlanYedidya Benshimol
We can't be an EMLSR while suspended with wowlan. De-activate the secondary link upon wowlan entring. Set the blocking reason upon suspension and clear it upon resume. Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240416134215.6ea884b3f095.I84233cb1c79ba538defafb8ddb983c47f04a400a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: get periodic statistics in EMLSRMiri Korenblit
In EMLSR we need to track the RSSI of both links, and exit if the RSSI of one of the links got too low. For that request the FW to send statistics every 5 seconds when in EMLSR. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240416134215.6e19d596d77f.Ica2a75a031b1bced0dc2e18c5d365b5eb0d3ec07@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: don't recompute EMLSR mode in can_activate_linksMiri Korenblit
mac80211 invokes the driver callback drv_can_activate_links() from ieee80211_set_active_links to verify it can activate the desired link combination. However, ieee80211_set_active_links is called with more than one link in 2 cases: - After driver's link selection decided to enter EMLSR - From debugfs, for testing purposes. For both cases there is no need to recompute all the considerations determining whether to activate EMLSR. Instead, only check if the vif is not blocked for EMLSR. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240416134215.202cf5a9ef2c.I65e4698b730a8652ad8d1c01420aabb41a1d04fd@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: implement EMLSR prevention mechanism.Miri Korenblit
Address scenarios where repeated entry and exit from EMLSR occur, such as encountering missed beacons on a specific link, while still discovering that link during a scan. To mitigate this, introduce the EMLSR prevention mechanism, which operates as follows: - On each exit from EMLSR event, record the timestamp and the exit reason. - If two consecutive exits happen for the same reason within a 400-second window, enforce a 300-second EMLSR prevention. - If a third exit for the same reason occurs within 400 seconds from the second exit, enforce an extended EMLSR prevention of 600 seconds. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240416134215.d820ee98b300.I6406db40cf25eabdba602afd783466473b909216@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: exit EMLSR upon missed beaconMiri Korenblit
In case of more than 6 missed beacons on one of the links, exit EMLSR by deactivating that link. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240416134215.f9111c79cb53.Ie95ea60149a9bc4367f6b338b37c8635051351ba@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: init vif works only onceJohannes Berg
It's dangerous to re-initialize works repeatedly, especially delayed ones that have an associated timer, and even more so if they're not necessarily canceled inbetween. This can be the case for these workers here during FW restart scenarios, so make sure to initialize it only once. While at it, also ensure it is cancelled correctly. Fixes: f67806140220 ("iwlwifi: mvm: disconnect in case of bad channel switch parameters") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240416134215.ddf8eece5eac.I4164f5c9c444b64a9abbaab14c23858713778e35@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: Add helper functions to update EMLSR statusMiri Korenblit
There are reasons for which we need to exit EMLSR, but not to block it completely, and there are reasons for which we need to block EMLSR. For both reason types we have the enum iwl_mvm_esr_state, when the blocking reasons are stored in the `mvmvif::esr_disable_reason` bitmap. This change introduces the APIs to use in the different cases: - iwl_mvm_exit_esr - will exit from EMLSR mode. - iwl_mvm_block_esr - will update the bitmap and exit EMLSR, to be used for the blocking reasons only. - iwl_mvm_unblock_esr - will update the bitmap. To be used for the blocking reasons only. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240416134215.d54142a75876.I552926065521f5f848c37b0bd845494bd7865fb7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: Implement new link selection algorithmMiri Korenblit
Replaces the current logic with a new algorithm based on the link grading introduced in a previous patch. The new selection algorithm will be invoked upon successful scan to ensure it has the necessary updated data it needs. This update delegates the selection logic as the primary link determiner in EMLSR mode, storing it in mvmvif to avoid repeated calculations, as the result may vary. Additionally, includes tests for iwl_mvm_valid_link_pair to validate link pairs for EMLSR. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240416134215.309fb1b3fe44.I5baf0c293c89a5a28bd1a6386bf9ca6d2bf61ab8@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: move EMLSR/links codeMiri Korenblit
The functions that are link related, so they should be in link.c and not in mld-mac80211.c. Move them. Also move the different prototypes to the right place in mvm.h Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240416134215.e7c368256fa0.I6b15805a7c8a75d1814f1a829601daf4d3788731@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: check if EMLSR is allowed before selecting linksMiri Korenblit
Currenty iwl_mvm_mld_select_links() doesn't fully check that EMLSR is allowed before selecting the 2 best links. Although it will fail in ieee80211_set_active_links(), it is preferred to avoid the redundent calculations. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240416134215.3578a93feb1a.I1cd91608bb73fbe19b8dfdf90e14ce40b98c3430@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: don't always disable EMLSR due to BT coexMiri Korenblit
2.4 GHz/LB (low band) link can't be used in an EMLSR links pair when BT is on. But EMLSR is still allowed for a pair of links which none of them operates in LB. In the existing code, EMLSR will always be disabled if one of the usable links is in LB (and BT is on). Move this check to the code that verifies a specific pair of links, and only if one of these links operates on LB - disable EMLSR. Fixes: 10159a45666b ("wifi: iwlwifi: disable eSR when BT is active") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240416134215.2841006b5cc4.I45ffd583f593daa950322852ceb9454cbf497e24@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: calculate EMLSR mode after connectionMiri Korenblit
The function iwl_mvm_can_enter_esr() is (among others) calculating if EMLSR mode is disabled due to BT coex by calling iwl_mvm_bt_coex_calculate_esr_mode(), then stores the decision in mvmvif::esr_disable_reason. But there is no need to calculate this every time iwl_mvm_can_enter_esr is called. Fix this by calculating it once after authorization, and in iwl_mvm_can_enter_esr only check mvmvif::esr_disable_reason. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240416134215.a767e243366e.I3b32d36cda23f67dc103a28a9bdccb0039d22574@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: implement link gradingMiri Korenblit
For selecting what link(s) out of the usable ones to activate, calculate a grade for a given link. Calculation of a link grade is done as follows: 1. get the estimated throughput according to the RSSI of the link, this will be the base grade 2. get the channel load from the BSS Load Element, subtracting the load caused by us. Apply the factor on the grade. 3. puncturing factor: calculate the percentage of the punctured subchannels (out of the total subchannels). Apply this on the grade. The link grading will be used by the link selection mechanism in a later patch. Also add KUnit tests for it. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240416134215.a6799dbd5643.If137ca6dc443606c7d8c99ec1fc38b325003a7c1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: send ap_tx_power_constraints cmd to FW in AP modeMukesh Sisodiya
Send AP_TX_POWER_CONSTRAINTS_CMD with no local maximum transmit power constraint to FW and FW will update the TPE element with required tx power limits. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240416134215.b6af4ecfcfe8.I07e8db349190e0c58c468c18477d8551288ac069@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: introduce esr_disable_reasonEmmanuel Grumbach
This will maintain a bitmap of reasons for which we want to avoid enabling EMLSR. For now, we have a single reason: BT coexistence, but we will add soon more reasons. Make it a bitmap to make it easier to manage. Since we'll impact the parameters that impact the enablement / disablement of EMLSR from several places, introduce a generic function that takes into account the current state and execute the decision that must be taken. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240416134215.94c3590c6f27.I6a190da5025d0523ef483ffac0c64e26675041e6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: Add support for LARI_CONFIG_CHANGE_CMD v10Anjaneyulu
Add support for enable/disable 320 MHz for Japan and South Korea by reading WBEM (WiFi Bandwidth Enablement per MCC) variable from UEFI or ACPI and sending it to the FW. Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240415114847.7946c3befbe1.I453c33f7ea48156ea2a3961f50a9003103fca5a5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: Add support for PPAG cmd v6Anjaneyulu
Add support for enablement of PPAG for - VLP for 6 GHz mode in CANADA, USA and ETSI countries. - LPI for 6 GHz mode in CANADA. - SP for 6 GHz mode in CANADA, USA and ETSI countries. Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240415114847.e1893fe24ea3.Ic84cf576de0883c2184c939bdfad4b110a8a1815@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: move lari_config handlig to regulatoryAnjaneyulu
moved lari_config handling to common place to avoid code duplication. Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240415114847.02bfcd27b333.If149c3038bdfe57e254b26857209e8c7ab709779@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: add a device ID for BZ-WEmmanuel Grumbach
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240415114847.c387957560ea.I9229336936faa0ed346af469e9c77c7d6e5a2541@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: move WTAS macro to api fileAnjaneyulu
regulatory header file should not be included in API file, as API defination should be independent. Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240415114847.61c9163859a7.Id29a86566ff313ab8e85aa1007f841e95a67d6b7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: extend STEP URM workaround for new devicesJohannes Berg
The same applies for newer devices (currently SC), so just change the condition here. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240415114847.db62bba6b2fa.Ie7fdc75c0b8759574a8744f0a316065cb791dd82@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: move phy band to nl80211 band helperBenjamin Berg
This function is useful in other places, so move it in order to share it. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240415114847.8e456d6c599e.Ibaa76864b30c990bfc35d886ec1344d513a96d14@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: Refactor tracking of scan UIDsIlan Peer
Instead of setting the UID to type mapping while building the scan command, set the UID to type mapping only after the scan request command was sent successfully. This resolves a bug where in case a scan request command fails and a recovery flow is initiated, the recovery flow would indicate to mac80211 that scan is completed though it was not really started. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240415114847.7011e93363a2.Idb9b401414864dfc5540d8798a6cb2b192a2acc2@changeid [also remove from iwl_mvm_scan_umac_v14_and_above()] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: mac80211_hwsim: init peer measurement resultJohannes Berg
If we don't get all the values here, we might pass them to cfg80211 uninitialized. Fix that, even if the input might then not make much sense. Fixes: 2af3b2a631b1 ("mac80211_hwsim: add PMSR report support via virtio") Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240418105220.e1317621c1f9.If7dd447de24d7493d133284db5e9e482e4e299f8@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19Revert "wifi: iwlwifi: bump FW API to 90 for BZ/SC devices"Johannes Berg
Revert the API version bump, the kernel doesn't actually have all the code to deal with that version yet. Fixes: 653a90f6b226 ("wifi: iwlwifi: bump FW API to 90 for BZ/SC devices") Link: https://msgid.link/20240419085147.cd756fadab03.Ibccbb65be8e05b516cae1b9fb27a959662f9f51a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: rtl8xxxu: Fix the TX power of RTL8192CU, RTL8723AUBitterblue Smith
Don't subtract 1 from the power index. This was added in commit 2fc0b8e5a17d ("rtl8xxxu: Add TX power base values for gen1 parts") for unknown reasons. The vendor drivers don't do this. Also correct the calculations of values written to REG_OFDM0_X{C,D}_TX_IQ_IMBALANCE. According to the vendor driver, these are used for TX power training. With these changes rtl8xxxu sets the TX power of RTL8192CU the same as the vendor driver. None of this appears to have any effect on my RTL8192CU device. Cc: stable@vger.kernel.org Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/6ae5945b-644e-45e4-a78f-4c7d9c987910@gmail.com
generated by cgit v1.2.3 (git 2.25.1) at 2026-08-31 23:09:45 +0000