| Age | Commit message (Collapse) | Author |
|
Modify EMLSR debug prints to use IWL_DL_EHT instead
of IWL_DL_INFO. This will allow better communication
with validation as they might enable only IWL_DL_EHT
or IWL_DL_INFO as required.
Add prints to log attempt to switch links when
missed beacons exceed threshold.
Print both link ids and missed beacons when in EMLSR
mode.
Signed-off-by: Nidhish A N <nidhish.a.n@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251019114304.3bfc2bc8f410.I405ab2aa81af1ba0ea5eaff343eae1778f2035d9@changeid
|
|
We have a few devices that don't allow EHT. Make sure we reflect this
towards mac80211 so that we won't try to enable it.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251019114304.71121f4e5557.I49e2329d4121f9e52d0889156d0c3e8778e27d88@changeid
|
|
Start supporting Core 101 FW on these devices.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251019114304.23300d52cd8b.I6aad50aed469d7734c165086796dfa9cdf9d81bd@changeid
|
|
If the firmware sends a ROC notification after the driver
cancelled it, we can get into this WARN_ON(). Don't do that,
use IWL_FW_CHECK() instead.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Tested-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251019114304.48aff2c8922e.Ie27b21eb26b67c8010d13ce9590751cad417d1ad@changeid
|
|
Non-HT frames can only be encoded in 20 MHz, however, they
could be duplicated on all/some of the subchannels (mostly
used for RTS/CTS), in which case the firmware will report
and estimate of the overall used bandwidth based on energy
detected. This could be confusing so don't report it that
way, always use 20 MHz for non-HT/legacy frames instead.
Note that currently the value doesn't appear to be used by
mac80211, it never checks the bandwidth field for legacy
encodings.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251019114304.23e6695039ca.I3da7c542bde6de4362755f200248dbcc12aa246e@changeid
|
|
Start supporting Core 100 FW on those devices.
In addition, the move to the new Core scheme (instead of API scheme)
will start Core 100 and not 99, as planned. Adjust for that as well.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251019114304.00c28b4259da.Idd6281cd647f1b33f2572a8c107c3a3228e03665@changeid
|
|
When neither mvm nor mld are configured, we don't have the
iwl_bz_mac_cfg symbol and thus cannot check for it. But in
that case the relevant device entries aren't and cannot be
present, so just ifdef the test code for that.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202509170625.BAJBe7Bi-lkp@intel.com/
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251019114304.615810979e7b.I9a215f955bb3208d99239be8496d19e0f186b4d0@changeid
|
|
Validate iwl_probe_resp_data_notif::noa_attr::len_low since we are using
its value to determine the noa_len, which is later used for the NoA
attribute.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251019114304.b127a2b57e8c.I7ccaf118d236fb39da5da351b95ad9b37b825bc2@changeid
|
|
It is not very clear what values we put in min_umac_error_event_table.
For Ma (Meteor Lake), this value is wrong and we get the print:
Not valid error log pointer ...
Just remove the check.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251019114304.a64d0803150f.Ie2db385f68e17fb0adcdcb16e5bf0125289e177d@changeid
|
|
All wifi7 devices need CONFIG_IWLMLD to be enabled.
If we can't support the wifi7 device and the module is not enabled,
complain to the user.
The check in iwl_req_fw_callback is then no longer required.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251019114304.071dae9a5de2.I1603085bac5a796442faa75982f8675647becfec@changeid
|
|
We only need versions 1, 6, 8 and 12.
Remove versions 2, 3, 4, 5, 7, 9, 10, 11.
Signed-off-by: Nidhish A N <nidhish.a.n@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251019114304.5c3de58594e8.I6e6f8707eb66a2b540fb19303c06393f13e1f68e@changeid
|
|
This is useful for debugging and can also be used to see
anything that isn't encoded in radiotap (yet.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251019114304.5fe26e9061f2.Iefb45e3a6a2a62ff3247db4de3777059d390af95@changeid
|
|
This will break current sniffer functionality for firmware
versions that don't have the new API, but supporting both
would be very complex. Convert the code to use only the new
sniffer notification.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251019114304.85b75a084a2f.I4a18b2043703c1f9a8f55c108dcaaeca7891e19c@changeid
|
|
Instead of having a static const array for each possible combination of
features, build the extended capabilities dynamically.
With this we will also stop setting EHT capabilities when it might
actually be disabled.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250915113137.b3c03b56d5a3.I38eaf8ebaf3256e78b4643bef7e3a54aeb4989df@changeid
|
|
This allows to set the antennas from user space.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250915113137.5a45baf9513c.I5912e6b6d9a9ae6530d0ac45e9517d07f98b8d05@changeid
|
|
The iwlmvm op mode is used for pre EHT HWs. Those HWs doesn't have wider
OFDMA, so phy command versions 5+ (that added support for wider OFDMA)
are not supported. Remove support for them.
This means that we also don't need to set the
IEEE80211_VIF_IGNORE_OFDMA_WIDER_BW, as we don't care about the ap
chandef anyway.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250915113137.e7e26fe71132.I8ec95ff86521661118782ecee1be20ef6e8e48e1@changeid
|
|
Fix the remaining kernel-doc warnings across the driver.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250915113137.f94b6d4ef142.I91007eed4cf37125ca7a012f2021615b4fa9eb66@changeid
|
|
Add a test that checks, for the old pre-CNVI devices, that
PCI IDs listed in the PCI IDs table will also match in the
config table. Newer ones we test against our database of
devices, but the current database doesn't go back that far,
so at least this checks against the PCI IDs the driver has.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250915113137.eb728b270d46.Ie5754f4201b807eb0d55feb339a728fc0b42e8bf@changeid
|
|
Add a couple of device names so that these new devices will
be shown correctly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250915113137.1cbc0251532f.I6183a6a08a7998e598042a50c7d7a6b82f9fa58e@changeid
|
|
iwlmld is used since API 97 and for wifi7 devices.
Since APIs < 97 are no longer supported on such devices,
we can remove the API check and always load iwlmld for the wifi7
devices.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250915113137.45ab33fcdc00.Ia3a40b687b75c872cf7e7a19331a014bccf5f2d6@changeid
|
|
These aren't really related to rate scaling, they're just
firmware API functions. Try to keep rs.c more for scaling
and move these out.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250915113137.547129c7732e.I12c40876537722680d069b4bb5fc058206ba63d4@changeid
|
|
When the throughput count reaches the threshold, EMLSR is no longer
blocked by throughput.
This doesn't mean that EMLSR will be activated immediately, since there
might be other reasons that block EMLSR.
When the throughput blocker is not set, check_tpt_wk should run every 5
seconds and check if the throughput blocker should be set (if the
throughtput counter dropped).
If not, it should reschedule itself.
In the current code, the worker will reschedule itself only if we are in
EMLSR. This is wrong, since we might be in a case where the throughput
blocker is not set but we are not in EMLSR, and then we will never check
again the throughput counters (and block EMLSR if needed).
Fix this by rescheduling the worker also when EMLSR is not active.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250915113137.2a9cf2b2529d.I8284c0da9597e4c963e38ae133384f6f42044499@changeid
|
|
The last FW API that supports version 6 is 97. Since this API is no
longer supported on any device that loads iwlmld, we can remove support
of it.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250915113137.4923c981b0bf.Iff598c6d109fdbf0d5a5bab59d53485478ecc125@changeid
|
|
This struct rperesent versions 6 and 7. The convention is to name an API
struct with the last version it represent, so rename to
iwl_alive_ntf_v7.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250915113137.81240e1d4df3.I2c1264a49b9f0fc160f960cf3c5dc4cedf6ceb6d@changeid
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
Miri Korenblit says:
====================
iwlwifi fix
avoid use after free
====================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This code frees "link" by calling kfree_rcu(link, rcu_head) and then it
dereferences "link" to get the "link->fw_id". Save the "link->fw_id"
first to avoid a potential use after free.
Fixes: d1e879ec600f ("wifi: iwlwifi: add iwlmld sub-driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aNKCcKlbSkkS4_gO@stanley.mountain
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.17-rc7).
No conflicts.
Adjacent changes:
drivers/net/ethernet/mellanox/mlx5/core/en/fs.h
9536fbe10c9d ("net/mlx5e: Add PSP steering in local NIC RX")
7601a0a46216 ("net/mlx5e: Add a miss level for ipsec crypto offload")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In my previous fix for this condition, I erroneously listed 9000
instead of 7000 family, when 7000/8000 were already using iwlmvm.
Thus the condition ended up wrong, causing the issue I had fixed
for older devices to suddenly appear on 7000/8000 family devices.
Correct the condition accordingly.
Reported-by: David Wang <00107082@163.com>
Closes: https://lore.kernel.org/r/20250909165811.10729-1-00107082@163.com/
Fixes: 586e3cb33ba6 ("wifi: iwlwifi: fix byte count table for old devices")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250915102743.777aaafbcc6c.I84404edfdfbf400501f6fb06def5b86c501da198@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Plenty of things going on, notably:
- iwlwifi: major cleanups/rework
- brcmfmac: gets AP isolation support
- mac80211: gets more S1G support
* tag 'wireless-next-2025-09-11' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (94 commits)
wifi: mwifiex: fix endianness handling in mwifiex_send_rgpower_table
wifi: cfg80211: Remove the redundant wiphy_dev
wifi: mac80211: fix incorrect comment
wifi: cfg80211: update the time stamps in hidden ssid
wifi: mac80211: Fix HE capabilities element check
wifi: mac80211: add tx_handlers_drop statistics to ethtool
wifi: mac80211: fix reporting of all valid links in sta_set_sinfo()
wifi: iwlwifi: mld: CHANNEL_SURVEY_NOTIF is always supported
wifi: iwlwifi: mld: remove support of iwl_esr_mode_notif version 1
wifi: iwlwifi: mld: remove support from of sta cmd version 1
wifi: iwlwifi: mld: remove support of roc cmd version 5
wifi: iwlwifi: mld: remove support of mac cmd ver 2
wifi: iwlwifi: mld: don't consider phy cmd version 5
wifi: iwlwifi: implement wowlan status notification API update
wifi: iwlwifi: fw: Add ASUS to PPAG and TAS list
wifi: iwlwifi: add kunit tests for nvm parse
wifi: iwlwifi: api: add a flag to iwl_link_ctx_modify_flags
wifi: iwlwifi: pcie: move ltr_enabled to the specific transport
wifi: iwlwifi: pcie: move pm_support to the specific transport
wifi: iwlwifi: rename iwl_finish_nic_init
...
====================
Link: https://patch.msgid.link/20250911100854.20445-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The 130/1030 devices are really derivatives of 6030,
with some small differences not pertaining to the MAC,
so they must use the 6030 MAC config.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220472
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220517
Fixes: 35ac275ebe0c ("wifi: iwlwifi: cfg: finish config split")
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909121728.8e4911f12528.I3aa7194012a4b584fbd5ddaa3a77e483280f1de4@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
This notification is supported in FW since API 100.
Since we don't support any API older than that, we don't need to check
whether the notification is supported.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909061931.b43f7da0d63b.I7386aeef5fae70dc4b0901cfb650eeaecb4c1575@changeid
|
|
The last FW API that supports version 5 is 99. Since this API is no
longer supported on any device that loads iwlmld, we can remove support
of it.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909061931.e15a7fa15c70.Ibb8636e826136c8c31931e77f5ffa853372b4301@changeid
|
|
The last FW API that supports version 1 is 99. Since this API is no
longer supported on any device that loads iwlmld, we can remove support
of it.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909061931.4d6689d5c4b2.I5d2bf7302eea8ac7a805f58e4e60e527d6f5b346@changeid
|
|
The last FW API that supports version 5 is 97. Since this API is no
longer supported on any device that loads iwlmld, we can remove support
of it.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909061931.e53bd8553360.I6978c216b52b818b879d076a85c5f9edafcf2e99@changeid
|
|
The last FW API that supported ver 2 is API 99 (core 96)
Since we no longer support it in any device that loads iwlmld, we can
remove support of it.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909061931.a56bf370d31a.Ie1e93654ce9ee52e6ae3fda9bc898d611456ec41@changeid
|
|
It was planed that iwlmld will be loaded also for HR and GF, which has
versions < 6. But eventually it was decided to keep use iwlmvm for those
devices, so iwlmld doesn't need to support those versions.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909061931.42501c7b0baa.I207ff53d259cc90781a0082320e2646b35925e5f@changeid
|
|
Add per key status indication in the WOWLAN status notification.
This update is required for fips. Each key entry now
includes a status field.
Keys are now processed as follows:
0: no key, ignore entry
1: old, use only metadata
2: new, use key material and metadata
While at it, fix tid_offloaded_tx error message to print the
actual variable being validated in iwl_mld_handle_wowlan_info_notif.
Signed-off-by: Rotem Kerem <rotem.kerem@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909061931.0a2e7a62504c.Id195c9c83f9f767d1e3e458468af2d933774daa1@changeid
|
|
Add ASUS to the list of OEMs that are allowed to use
the PPAG and TAS feature.
Signed-off-by: Nidhish A N <nidhish.a.n@intel.com>
Reviewed-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909061931.499af6568e89.Iafb2cb1c83ff82712c0e9d5529f76bc226ed12dd@changeid
|
|
nvm flags is part of nvm parse. Add test for VLP AP/CLIENT
enable/disable scenarios.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909061931.a7a4713fbfee.Ia0caf8865e63b40826c9b66084bd20438554f15c@changeid
|
|
Add a new flag which, when set, will indicate that the UHR parameters in
the link command have changed.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909061931.b399aebbc384.I8a5a2728e71d92db67d4a4e0f4c358ca7b16ff51@changeid
|
|
Currently it is under iwl_trans, which is the bus agnostic part of the
transport. But really it is relevant for pcie only, so move it to the
iwl_trans_pcie and export it via an API to the opmode.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909061931.9f9dc80ab06c.I3eeca8b17abeba6ed30f0d681518c81ede0acf30@changeid
|
|
Currently it is under iwl_trans, which is the bus agnostic part of the
transport. But really it is relevant for pcie only, so move it to the
iwl_trans_pcie and export it via an API to the opmode.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909061931.997193cabd04.Ic6648f040430c94150d0fa11601f50a6a630b862@changeid
|
|
The function is called so because for older devices it sets a bit called
"init_done". But for the latest devices it sets a different bit,
"mac_init". Since this name is not clear anyway, rename it such that it
indicates the logic of the newer devices.
Also add the 'trans' prefix so iw will be clear from the name that this
is a transport API.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909061931.a1de688e574b.Ibd41b0c8f7fbae77026e76dbbc085df3eecec538@changeid
|
|
Convert STATUS_SUPPRESS_CMD_ERROR_ONCE from a status bit to a simple
bool field in struct iwl_trans, as atomicity is not needed.
Signed-off-by: Rotem Kerem <rotem.kerem@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909061931.b33366c11a45.I75aac05afd8c4d8ef217d03327c1a027d6e7667e@changeid
|
|
Add iwl_trans_notify_fw_error() and iwl_trans_is_fw_error() for use by
op modes. These helpers provide a clean interface for marking and
checking firmware error state. This hides the trans internal
implementation details from callers.
Signed-off-by: Rotem Kerem <rotem.kerem@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250909061931.23f5160b3265.Iba325ffa4c6c6f7fc3a702fb6c1827b0857d0db3@changeid
|
|
The debugfs_lookup() function increases the dentry reference count.
Add missing dput() call to release the reference when the "iwlmld"
directory already exists.
Fixes: d1e879ec600f ("wifi: iwlwifi: add iwlmld sub-driver")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://patch.msgid.link/20250902040955.2362472-1-linmq006@gmail.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Remove unused fexible-array member and avoid 14 of the following type of
warnings:
drivers/net/wireless/intel/iwlwifi/mei/sap.h:318:28: warning: structure containing a flexible array member is not at the end of another structure
[-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/aK6-usANI1UPtFVo@kspp
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
The header file "fw/img.h" is already included on line 9. Remove the
redundant include.
Fixes: 2594e4d9e1a2d ("wifi: iwlwifi: prepare for reading SAR tables from UEFI")
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Link: https://patch.msgid.link/20250819121201.608770-2-liaoyuanhong@vivo.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
The header files fw/api/tx.h is included twice in gen1_2/trans.c,
so one inclusion of each can be removed.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=22932
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://patch.msgid.link/20250723070522.2195817-1-yang.lee@linux.alibaba.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next into HEAD
Miri Korenblit says:
====================
iwlwifi features, notably:
- more cleanups of d3 code
- cleanups of the transport layer
====================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|