| Age | Commit message (Collapse) | Author |
|---|
|
Implement Display for Spec. This simplifies the dev_info!() code for
printing banners such as:
NVIDIA (Chipset: GA104, Architecture: Ampere, Revision: a.1)
Cc: Alexandre Courbot <acourbot@nvidia.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251114024109.465136-2-jhubbard@nvidia.com>
|
|
Boot the GSP to the RISC-V active state. Completing the boot requires
running the CPU sequencer which will be added in a future commit.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251110-gsp_boot-v9-15-8ae4058e3c0e@nvidia.com>
|
|
This will be needed by both the GSP boot code as well as GSP resume code
in the sequencer.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251110-gsp_boot-v9-14-8ae4058e3c0e@nvidia.com>
|
|
Add definition for RISCV_CPUCTL register and use it in a new falcon API
to check if the RISC-V core of a Falcon is active. It is required by
the sequencer to know if the GSP's RISCV processor is active.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251110-gsp_boot-v9-13-8ae4058e3c0e@nvidia.com>
|
|
Add support for sending the SetRegistry command, which is critical to
GSP initialization.
The RM registry is serialized into a packed format and sent via the
command queue. For now only three parameters which are required to boot
GSP are hardcoded. In the future a kernel module parameter will be added
to enable other parameters to be added.
Signed-off-by: Alistair Popple <apopple@nvidia.com>
[acourbot@nvidia.com: split into its own patch.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251110-gsp_boot-v9-12-8ae4058e3c0e@nvidia.com>
|
|
Add support for sending the SetSystemInfo command, which provides
required hardware information to the GSP and is critical to its
initialization.
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251110-gsp_boot-v9-11-8ae4058e3c0e@nvidia.com>
|
|
Initialise the GSP resource manager arguments (rmargs) which provides
initialisation parameters to the GSP firmware during boot. The rmargs
structure contains arguments to configure the GSP message/command queue
location.
These are mapped for coherent DMA and added to the libos data structure
for access when booting GSP.
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Co-developed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251110-gsp_boot-v9-10-8ae4058e3c0e@nvidia.com>
|
|
This commit introduces core infrastructure for handling GSP command and
message queues in the nova-core driver. The command queue system enables
bidirectional communication between the host driver and GSP firmware
through a remote message passing interface.
The interface is based on passing serialised data structures over a ring
buffer with separate transmit and receive queues. Commands are sent by
writing to the CPU transmit queue and waiting for completion via the
receive queue.
To ensure safety mutable or immutable (depending on whether it is a send
or receive operation) references are taken on the command queue when
allocating the message to write/read to. This ensures message memory
remains valid and the command queue can't be mutated whilst an operation
is in progress.
Currently this is only used by the probe() routine and therefore can
only used by a single thread of execution. Locking to enable safe access
from multiple threads will be introduced in a future series when that
becomes necessary.
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Co-developed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251110-gsp_boot-v9-9-8ae4058e3c0e@nvidia.com>
|
|
Derive the Zeroable trait for existing bindgen generated bindings. This
is safe because all bindgen generated types are simple integer types for
which any bit pattern, including all zeros, is valid.
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251110-gsp_boot-v9-7-8ae4058e3c0e@nvidia.com>
|
|
A data structure that can be used to write across multiple slices which
may be out of order in memory. This lets SBuffer user correctly and
safely write out of memory order, without error-prone tracking of
pointers/offsets.
let mut buf1 = [0u8; 3];
let mut buf2 = [0u8; 5];
let mut sbuffer = SBuffer::new([&mut buf1[..], &mut buf2[..]]);
let data = b"hello";
let result = sbuffer.write(data);
Reviewed-by: Lyude Paul <lyude@redhat.com>
Co-developed-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Co-developed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251110-gsp_boot-v9-6-8ae4058e3c0e@nvidia.com>
|
|
The GSP requires some pieces of metadata to boot. These are passed in a
struct which the GSP transfers via DMA. Create this struct and get a
handle to it for future use when booting the GSP.
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Co-developed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251110-gsp_boot-v9-5-8ae4058e3c0e@nvidia.com>
|
|
The GSP requires several areas of memory to operate. Each of these have
their own simple embedded page tables. Set these up and map them for DMA
to/from GSP using CoherentAllocation's. Return the DMA handle describing
where each of these regions are for future use when booting GSP.
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Co-developed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251110-gsp_boot-v9-4-8ae4058e3c0e@nvidia.com>
|
|
smaller type
There are times where we need to store a constant value defined as a
larger type (e.g. through a binding) into a smaller type, knowing
that the value will fit. Rust, unfortunately, only provides us with the
`as` operator for that purpose, the use of which is discouraged as it
silently strips data.
Extend the `num` module with functions allowing to perform the
conversion infallibly, at compile time.
Example:
const FOO_VALUE: u32 = 1;
// `FOO_VALUE` fits into a `u8`, so the conversion is valid.
let foo = num::u32_to_u8::<{ FOO_VALUE }>();
We are going to use this feature extensively in Nova.
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
[acourbot@nvidia.com: fix mistake in example pointed out by Mikko.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251110-gsp_boot-v9-3-8ae4058e3c0e@nvidia.com>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- New HW workarounds affecting PTL and WCL platforms
(Nitin Gote, Tangudu Tilak Tirumalesh)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/ay2qztgonodwson6tuzcv5napjmqbgwzv27so4ybfola34guux@xgufrrmbzyws
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Fix PSR's pipe to vblank conversion (Jani)
- Disable Panel Replay on MST links (Imre)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/aRXdQnitzyFcokhF@intel.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
client:
- Fix description of module parameter
panthor:
- Flush writes before mapping buffers
vmwgfx:
- Improve command validation
- Improve ref counting
- Fix cursor-plane support
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20251113132317.GA451885@linux.fritz.box
|
|
The content of every half of screen is sent out via one interface in
dual-DSI case. The content for every interface is blended by a LM
pair in quad-pipe case, thus a LM pair should not blend any content
that cross the half of screen in this case. Clip plane into pipes per
left and right half screen ROI if topology is quad pipe case.
The clipped rectangle on every half of screen is futher handled by two
pipes if its width exceeds a limit for a single pipe.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jessica Zhang <jessica.zhang@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/675416/
Link: https://lore.kernel.org/r/20250918-v6-16-rc2-quad-pipe-upstream-4-v16-9-ff6232e3472f@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Currently, SSPPs are assigned to a maximum of two pipes. However,
quad-pipe usage scenarios require four pipes and involve configuring
two stages. In quad-pipe case, the first two pipes share a set of
mixer configurations and enable multi-rect mode when certain
conditions are met. The same applies to the subsequent two pipes.
Assign SSPPs to the pipes in each stage using a unified method and
to loop the stages accordingly.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Jessica Zhang <jessica.zhang@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/675414/
Link: https://lore.kernel.org/r/20250918-v6-16-rc2-quad-pipe-upstream-4-v16-8-ff6232e3472f@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Currently, only 2 pipes are used at most for a plane. A stage structure
describes the configuration for a mixer pair. So only one stage is needed
for current usage cases. The quad-pipe case will be added in future and 2
stages are used in the case. So extend the stage to an array with array
size STAGES_PER_PLANE and blend pipes per mixer pair with configuration in
the stage structure.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/675412/
Link: https://lore.kernel.org/r/20250918-v6-16-rc2-quad-pipe-upstream-4-v16-7-ff6232e3472f@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Currently MAX_CHANNELS_PER_ENC is defined as 2, because 2 channels are
supported at most in one encoder. The case of 4 channels per encoder is
to be added. To avoid breaking current WB usage case, use dedicated WB
definition before 4 WB usage case is supported in future.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/675410/
Link: https://lore.kernel.org/r/20250918-v6-16-rc2-quad-pipe-upstream-4-v16-6-ff6232e3472f@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
The stage contains configuration for a mixer pair. Currently the plane
supports just one stage and 2 pipes. Quad-pipe support will require
handling 2 stages and 4 pipes at the same time. In preparation for that
add a separate define, PIPES_PER_PLANE, to denote number of pipes that
can be used by the plane.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/675408/
Link: https://lore.kernel.org/r/20250918-v6-16-rc2-quad-pipe-upstream-4-v16-5-ff6232e3472f@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
There are 2 pipes in a drm plane at most currently, while 4 pipes are
required for quad-pipe case. Generalize the handling to pipe pair and
ease handling to another pipe pair later. Store pipes in array with
removing dedicated r_pipe.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/675406/
Link: https://lore.kernel.org/r/20250918-v6-16-rc2-quad-pipe-upstream-4-v16-4-ff6232e3472f@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Add pipe as trace argument in trace_dpu_crtc_setup_mixer() to ease
converting pipe into pipe array later.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/675404/
Link: https://lore.kernel.org/r/20250918-v6-16-rc2-quad-pipe-upstream-4-v16-3-ff6232e3472f@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
There are 2 interfaces and 4 pingpong in quad pipe. Map the 2nd
interface to 3rd PP instead of the 2nd PP.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/675402/
Link: https://lore.kernel.org/r/20250918-v6-16-rc2-quad-pipe-upstream-4-v16-2-ff6232e3472f@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Current code only supports usage cases with one pair of mixers at
most. To support quad-pipe usage case, two pairs of mixers need to
be reserved. The lm_count for all pairs is cleared if a peer
allocation fails in current implementation. Reset the current lm_count
to an even number instead of completely clearing it. This prevents all
pairs from being cleared in cases where multiple LM pairs are needed.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/675400/
Link: https://lore.kernel.org/r/20250918-v6-16-rc2-quad-pipe-upstream-4-v16-1-ff6232e3472f@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
'mixer' is only zeroed and is not use. Remove it.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-By: Mahesh Bharadwaj Kannan <mahesh.kannan@oss.qualcomm.com>
Fixes: ae4d721ce100 ("drm/msm/dpu: add an API to reset the encoder related hw blocks")
Patchwork: https://patchwork.freedesktop.org/patch/679854/
Link: https://lore.kernel.org/r/8e3b2fbbf5440aa219feb667f5423c7479eb2656.1760040536.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Set the correct DMA mask. Without this DMA will fail on some setups.
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251110-gsp_boot-v9-2-8ae4058e3c0e@nvidia.com>
|
|
Compute more of the required FB layout information to boot the GSP
firmware.
This information is dependent on the firmware itself, so first we need
to import and abstract the required firmware bindings in the `nvfw`
module.
Then, a new FB HAL method is introduced in `fb::hal` that uses these
bindings and hardware information to compute the correct layout
information.
This information is then used in `fb` and the result made visible in
`FbLayout`.
These 3 things are grouped into the same patch to avoid lots of unused
warnings that would be tedious to work around. As they happen in
different files, they should not be too difficult to track separately.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251110-gsp_boot-v9-1-8ae4058e3c0e@nvidia.com>
|
|
Calls to xe_force_wake_put() should generally pass the exact reference
returned by xe_force_wake_get(). Since OA grabs and releases forcewake
in different functions, xe_oa_stream_destroy() is currently calling put
with a hardcoded ALL mask. Although this works for now, it's somewhat
fragile in case OA moves to more precise power domain management in the
future.
Stash the original reference obtained during stream initialization
inside the stream structure so that we can use it directly when the
stream is destroyed.
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20251110232017.1475869-35-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
Calls to xe_force_wake_put() should generally pass the exact reference
returned by xe_force_wake_get(). Since EU stall grabs and releases
forcewake in different functions, xe_eu_stall_disable_locked() is
currently calling put with a hardcoded RENDER domain. Although this
works for now, it's somewhat fragile in case the power domain(s)
required by stall sampling change in the future, or if workarounds show
up that require us to obtain additional domains.
Stash the original reference obtained during stream enable inside the
stream structure so that we can use it directly when the stream is
disabled.
Cc: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20251110232017.1475869-34-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
Improve the kerneldoc for forcewake a bit to give more detail about what
the structures represent.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patch.msgid.link/20251110232017.1475869-33-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
Align pitch to multiples of 8 pixels for bpp values that do not map
to RGB formats. The call to drm_driver_color_mode_format() fails with
DRM_INVALID_FORMAT in these cases. Fall back to manually computing
the pitch alignment from which drm_mode_size_dumb() can compute the
correct pitch.
Fixes userspace that allocates dumb buffers for YUV formats, where
bpp equals 12. A common example is the IGT kms_getfb test.
v2:
- ignore width in calculation
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: b1d0e470f881 ("drm/imx/ipuv3: Compute dumb-buffer sizes with drm_mode_size_dumb()")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: imx@lists.linux.dev
Cc: linux-arm-kernel@lists.infradead.org
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patch.msgid.link/20251104153832.189666-1-tzimmermann@suse.de
|
|
Instead of trying very hard to find the largest fair GGTT size that
could be allocated for VFs on the current tile, pick some smaller
rounded down to power-of-two value that is more likely to be
provisioned in the same manner by the other PF instance:
num VFs | GGTT space (MiB)
--------+-----------------
63..57 | 56
56..29 | 64
28..15 | 128
14..8 | 256
7..4 | 512
3..2 | 1024
1 | 2048 (regular PF)
1 | 3584 (admin only PF)
Note that due to FW/HW limitations we can't share all 4GiB GGTT
address space with VFs, so for the larger (>7) number of the VFs
the change in the outcome is happening at different points than
we have in case of GuC contexts/doorbells IDs.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20251112124408.8094-1-michal.wajdeczko@intel.com
|
|
The MODULE_PARM_DESC string for the "active" parameter is missing a
space and has an extraneous trailing ']' character. Correct these.
Before patch:
$ modinfo -p ./drm_client_lib.ko
active:Choose which drm client to start, default isfbdev] (string)
After patch:
$ modinfo -p ./drm_client_lib.ko
active:Choose which drm client to start, default is fbdev (string)
Fixes: f7b42442c4ac ("drm/log: Introduce a new boot logger to draw the kmsg on the screen")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20251112010920.2355712-1-rdunlap@infradead.org
|
|
VF FLR requires additional processing done by PF driver.
The processing is done after FLR is already finished from PCIe
perspective.
In order to avoid a scenario where migration state transitions while
PF processing is still in progress, additional synchronization
point is needed.
Add a helper that will be used as part of VF driver struct
pci_error_handlers .reset_done() callback.
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251112132220.516975-24-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
Connect the helpers to allow save and restore of VRAM migration data in
stop_copy / resume device state.
Co-developed-by: Lukasz Laguna <lukasz.laguna@intel.com>
Signed-off-by: Lukasz Laguna <lukasz.laguna@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251112132220.516975-23-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
Introduce a new function to copy data between VRAM and sysmem objects.
The existing xe_migrate_copy() is tailored for eviction and restore
operations, which involves additional logic and operates on entire
objects.
The xe_migrate_vram_copy_chunk() allows copying chunks of data to or
from a dedicated buffer object, which is essential in case of VF
migration.
Signed-off-by: Lukasz Laguna <lukasz.laguna@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251112132220.516975-22-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
Instead of accessing VF's lmem_obj directly, introduce a helper function
to make the access more convenient.
Signed-off-by: Lukasz Laguna <lukasz.laguna@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251112132220.516975-21-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
Implement the helpers and use them for save and restore of MMIO
migration data in stop_copy / resume device state.
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251112132220.516975-20-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
Connect the helpers to allow save and restore of GGTT migration data in
stop_copy / resume device state.
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251112132220.516975-19-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
In an upcoming change, the VF GGTT migration data will be handled as
part of VF control state machine. Add the necessary helpers to allow the
migration data transfer to/from the HW GGTT resource.
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251112132220.516975-18-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
Connect the helpers to allow save and restore of GuC migration data in
stop_copy / resume device state.
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251112132220.516975-17-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
In upcoming changes, the GuC VF migration data will be handled as part
of separate SAVE/RESTORE states in VF control state machine.
Now that the data is decoupled from both guc_state debugfs and PAUSE
state, we can safely remove the struct xe_gt_sriov_state_snapshot and
modify the GuC save/restore functions to operate on struct
xe_sriov_migration_data.
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251112132220.516975-16-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
In upcoming changes, the GuC VF migration data will be handled as part
of separate SAVE/RESTORE states in VF control state machine.
Remove it from PAUSE state.
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251112132220.516975-15-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
In upcoming changes, SR-IOV VF migration data will be extended beyond
GuC data and exported to userspace using VFIO interface (with a
vendor-specific variant driver) and a device-level debugfs interface.
Remove the GT-level debugfs.
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251112132220.516975-14-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
Contiguous PF GGTT VMAs can be scarce after creating VFs.
Increase the GuC buffer cache size to 8M for PF so that we can fit GuC
migration data (which currently maxes out at just over 4M) and use the
cache instead of allocating fresh BOs.
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251112132220.516975-13-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
An upcoming change will use GuC buffer cache as a place where GuC
migration data will be stored, and the memory requirement for that is
larger than indirect data.
Allow the caller to pass the size based on the intended usecase.
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251112132220.516975-12-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
In upcoming changes the cached buffers are going to be used to read data
produced by the GuC. Add a counterpart to flush, which synchronizes the
CPU-side of suballocation with the GPU data and propagate the interface
to GuC Buffer Cache.
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251112132220.516975-11-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
The size is normally used to make a decision on when to stop the device
(mainly when it's in a pre_copy state).
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251112132220.516975-10-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
The descriptor reuses the KLV format used by GuC and contains metadata
that can be used to quickly fail migration when source is incompatible
with destination.
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251112132220.516975-9-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
