| Age | Commit message (Collapse) | Author |
|---|
|
Add support for gpu_busy on a3xx, which is required for devfreq
support.
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #ifc6410
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/523789/
Link: https://lore.kernel.org/r/20230223-topic-opp-v3-5-5f22163cd1df@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Some older GPUs (namely a2xx with no opp tables at all and a320 with
downstream-remnants gpu pwrlevels) used not to have OPP tables. They
both however had just one frequency defined, making it extremely easy
to construct such an OPP table from within the driver if need be.
Do so and switch all clk_set_rate calls on core_clk to their OPP
counterparts.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/523784/
Link: https://lore.kernel.org/r/20230223-topic-opp-v3-3-5f22163cd1df@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
As per the recommended recovery sequence of adreno gpu, cx gdsc should
collapse at hardware before it is turned back ON. This helps to clear
out the stale states in hardware before it is reinitialized. Use the
genpd notifier along with the newly introduced
dev_pm_genpd_synced_poweroff() api to ensure that cx gdsc has collapsed
before we turn it back ON.
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/516472/
Link: https://lore.kernel.org/r/20230102161757.v5.5.I9e10545c6a448d5eb1b734839b871d1b3146dac3@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Remove the unused 'reset' interface which was supposed to help to ensure
that cx gdsc has collapsed during gpu recovery. This is was not enabled
so far due to missing gpucc driver support. Similar functionality using
genpd framework will be implemented in the upcoming patch.
This effectively reverts commit 1f6cca404918
("drm/msm/a6xx: Ensure CX collapse during gpu recovery").
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Patchwork: https://patchwork.freedesktop.org/patch/516470/
Link: https://lore.kernel.org/r/20230102161757.v5.4.I96e0bf9eaf96dd866111c1eec8a4c9b70fd7cbcb@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
When a device has multiple power domains, dev->power_domain is left
empty during probe. That didn't cause any issue so far because we are
freeloading on smmu driver's vote on cx gdsc. Instead of that, create
a device_link between cx genpd device and gmu device to keep a vote from
gpu driver.
Before this patch:
localhost ~ # cat /sys/kernel/debug/pm_genpd/pm_genpd_summary
gx_gdsc on 0
/devices/genpd:1:3d6a000.gmu active 0
cx_gdsc on 0
/devices/platform/soc@0/3da0000.iommu active 0
After this patch:
localhost ~ # cat /sys/kernel/debug/pm_genpd/pm_genpd_summary
gx_gdsc on 0
/devices/genpd:1:3d6a000.gmu active 0
cx_gdsc on 0
/devices/platform/soc@0/3da0000.iommu active 0
/devices/genpd:0:3d6a000.gmu active 0
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/516468/
Link: https://lore.kernel.org/r/20230102161757.v5.3.I7f545d8494dcdbe6e96a15fbe8aaf5bb0c003d50@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Merge drm-next into msm-next to pick up external clk and PM dependencies
for improved a6xx GPU reset sequence.
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
BSPEC has updated the cdclk audio keepalives AUD_TS_CDCLK_M value to 60
for all supported platforms and refclks.
BSPEC: 54034
BSPEC: 55409
BSPEC: 65243
Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230316234654.3797572-1-clinton.a.taylor@intel.com
|
|
Commit 45d9c8dde4cd ("drm/vgem: use shmem helpers") introduced shmem
helpers to vgem and with that, removed all uses of the struct
drm_vgem_gem_object. So, as the struct is no longer used, delete it.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230222160617.171429-1-mcanal@igalia.com
|
|
The DRM device passed to drm_gem_prime_fd_to_handle() is where the
dma-buf is being imported, not the device where it was exported.
Also fix a trivial typo in drm_gem_prime_import_dev().
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20230224120931.1024-1-petrtesarik@huaweicloud.com
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230318190804.234610-20-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230318190804.234610-19-u.kleine-koenig@pengutronix.de
|
|
void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230318190804.234610-18-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230318190804.234610-17-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230318190804.234610-16-u.kleine-koenig@pengutronix.de
|
|
void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230318190804.234610-15-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230318190804.234610-14-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230318190804.234610-13-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230318190804.234610-12-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230318190804.234610-11-u.kleine-koenig@pengutronix.de
|
|
returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230318190804.234610-10-u.kleine-koenig@pengutronix.de
|
|
returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230318190804.234610-9-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230318190804.234610-8-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230318190804.234610-7-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230318190804.234610-6-u.kleine-koenig@pengutronix.de
|
|
void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230318190804.234610-5-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230318190804.234610-3-u.kleine-koenig@pengutronix.de
|
|
This reverts commit ee892ea83d99610fa33bea612de058e0955eec3a.
It was accidentally picked up for backporting. Revert.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230319140300.2892032-1-ashutosh.dixit@intel.com
|
|
Instead of the DRM framebuffer, pass the FB info strcuture to the
fbdev page-fault handler psb_fbdev_vm_fault(). The framebuffer is a
high-level data structure and does not belong into fault handling.
The fb_info has all necessary information. Also set fix.smem_start
to the correct value (the beginning of the framebuffer in physical
address space) and streamline the page-fault handler.
v2:
* remove unused struct drm_psb_private.fb_base (Patrik)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230313151610.14367-8-tzimmermann@suse.de
|
|
Implement fbdevemulation on top of struct drm_client and its helpers.
This ad-hoc interfaces for restoring and closing fbdev emulation with
per-client callback for hotplugging, restoring and unregistering.
A single function, psb_fbdev_setup(), starts fbdev emulation after
the DRM device has been registered. Hence, fbdev acts like a regular
DRM client.
The setup call only prepares the fbdev emulation. It then implements
connector hotplugging. The first successful hotplug event initializes
fbdev emulation.
Unregistering depends on the hotplugging. Fully initialized emulation
is cleaned up through drm_fb_helper_unregister_info() and fb_destroy.
For prepared-only setups, unregistering unprepares the emulation and
releases all resources. In both cases, fbdev emulation will be cleaned
up.
v2:
* declare empty setup function as 'static inline' (kernel
test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230313151610.14367-7-tzimmermann@suse.de
|
|
Inline psbfb_create() into its only caller psbfb_probe(). Streamline
the color-depth selection. Also clean up the naming around struct
drm_fb_helper_funcs.
v2:
* rename psbfb_probe() (Patrik)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230313151610.14367-6-tzimmermann@suse.de
|
|
Fix some names around struct fb_ops to better fit the overall naming
conventions. No functional changes.
v2:
* fix typo in commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230313151610.14367-5-tzimmermann@suse.de
|
|
Remove fbdev emulations' open and close implementaitons for the VM. The
functions are empty. Also update the naming of the VMA code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230313151610.14367-4-tzimmermann@suse.de
|
|
Move the fbdev emulation from framebuffer.c to fbdev.c. Only build
the source code if the Kconfig symbol has been selected. Remaining in
framebuffer.c is gma500's code for DRM framebuffers. No functional
changes.
v2:
* remove 'extern' from function declaration (Patrik)
* declare empty init/fini functions as 'static inline' (kernel
test robot)
* rebase onto vm_flags_set()
* typo fixes in commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230313151610.14367-3-tzimmermann@suse.de
|
|
Remove unnecessary include statements from framebuffer.c. No
functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230313151610.14367-2-tzimmermann@suse.de
|
|
When dynamically switching lanes was removed, the intent of the code
was to check to make sure that higher speed items used 4 lanes, but
it had the unintended consequence of removing the slower speeds for
4-lane users.
This attempts to remedy this by doing a check to see that the
max frequency doesn't exceed the chip limit, and a second
check to make sure that the max bit-rate doesn't exceed the
number of lanes * max bit rate / lane.
Fixes: 9a0cdcd6649b ("drm/bridge: adv7533: remove dynamic lane switching from adv7533 bridge")
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230319125524.58803-1-aford173@gmail.com
|
|
Handle errors first and return early, and reduce indentation on the
happy day code path.
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230317134144.223936-3-jani.nikula@intel.com
|
|
Prefer struct intel_connector over struct drm_connector.
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230317134144.223936-2-jani.nikula@intel.com
|
|
Move the debugfs next to the implementation.
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230317134144.223936-1-jani.nikula@intel.com
|
|
clang with W=1 reports
drivers/gpu/drm/bridge/sii9234.c:870:31: error:
unused function 'bridge_to_sii9234' [-Werror,-Wunused-function]
static inline struct sii9234 *bridge_to_sii9234(struct drm_bridge *bridge)
^
This static function is not used, so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230318002321.1675181-1-trix@redhat.com
|
|
When we change the M/N values seamlessly during a fastset we should
also update the vblank timestamping stuff to make sure the vblank
timestamp corrections/guesstimations come out exact.
Note that only crtc_clock and framedur_ns can actually end up
changing here during fastsets. Everything else we touch can
only change during full modesets.
Technically we should try to do this exactly at the start of
vblank, but that would require some kind of double buffering
scheme. Let's skip that for now and just update things right
after the commit has been submitted to the hardware. This
means the information will be properly up to date when the
vblank irq handler goes to work. Only if someone ends up
querying some vblanky stuff in between the commit and start
of vblank may we see a slight discrepancy.
Also this same problem really exists for the DRRS downclocking
stuff. But as that is supposed to be more or less transparent
to the user, and it only drops to low gear after a long delay
(1 sec currently) we probably don't have to worry about it.
Any time something is actively submitting updates DRRS will
remain in high gear and so the timestamping constants will
match the hardware state.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Fixes: e6f29923c048 ("drm/i915: Allow M/N change during fastset on bdw+")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230310235828.17439-1-ville.syrjala@linux.intel.com
(cherry picked from commit 8cb1f95cca68421b08333175719fdd3615372ca8)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Use hex format so that it is easier to decode.
Fixes: fe5979665f64 ("drm/i915/debugfs: Add perf_limit_reasons in debugfs")
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230315022906.2467408-1-vinay.belgaumkar@intel.com
(cherry picked from commit 5e008ba67cb80084e99b40ccd46f9029ae421632)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Probe pseudo errors should be injected only in places where real errors
can be encountered, otherwise unwinding code can be broken.
Placing intel_uc_init_late before i915_inject_probe_error violated
this rule, resulting in following bug:
__intel_gt_disable:655 GEM_BUG_ON(intel_gt_pm_is_awake(gt))
Fixes: 481d458caede ("drm/i915/guc: Add golden context to GuC ADS")
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230314151920.1065847-1-andrzej.hajda@intel.com
(cherry picked from commit c4252a11131c7f27a158294241466e2a4e7ff94e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
debug_active_activate() expected ref->count to be zero
which is not true anymore as __i915_active_activate() calls
debug_active_activate() after incrementing the count.
v2: No need to check for "ref->count == 1" as __i915_active_activate()
already make sure of that(Janusz).
References: https://gitlab.freedesktop.org/drm/intel/-/issues/6733
Fixes: 04240e30ed06 ("drm/i915: Skip taking acquire mutex for no ref->active callback")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230313114613.9874-1-nirmoy.das@intel.com
(cherry picked from commit bfad380c542438a9b642f8190b7fd37bc77e2723)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Error captures are tagged with an 'ecode'. This is a pseduo-unique magic
number that is meant to distinguish similar seeming bugs with
different underlying signatures. It is a combination of two ring state
registers. Unfortunately, the register state being used is only valid
in execlist mode. In GuC mode, the register state exists in a separate
list of arbitrary register address/value pairs rather than the named
entry structure. So, search through that list to find the two exciting
registers and copy them over to the structure's named members.
v2: if else if instead of if if (Alan)
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Fixes: a6f0f9cf330a ("drm/i915/guc: Plumb GuC-capture into gpu_coredump")
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Michael Cheng <michael.cheng@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Bruce Chang <yu.bruce.chang@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230311063714.570389-2-John.C.Harrison@Intel.com
(cherry picked from commit 9724ecdbb9ddd6da3260e4a442574b90fc75188a)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The Wa_14017073508 require to send Media Busy/Idle mailbox while
accessing Media tile. As of now it is getting handled while __gt_unpark,
__gt_park. But there are various corner cases where forcewakes are taken
without __gt_unpark i.e. without sending Busy Mailbox especially during
register reads. Forcewakes are taken without busy mailbox leads to
GPU HANG. So bringing mailbox calls under forcewake calls are no feasible
option as forcewake calls are atomic and mailbox calls are blocking.
The issue already fixed in B step so disabling MC6 on A step and
reverting previous commit which handles Wa_14017073508
Fixes: 8f70f1ec587d ("drm/i915/mtl: Add Wa_14017073508 for SAMedia")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230310061339.2495416-2-badal.nilawar@intel.com
(cherry picked from commit 038a24835ab68f341eaa7a0e3bcc6ce0f9b22e17)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
intel_crtc_prepare_cleared_state() is unintentionally losing
the "inherited" flag. This will happen if intel_initial_commit()
is forced to go through the full modeset calculations for
whatever reason.
Afterwards the first real commit from userspace will not get
forced to the full modeset path, and thus eg. audio state may
not get recomputed properly. So if the monitor was already
enabled during boot audio will not work until userspace itself
does an explicit full modeset.
Cc: stable@vger.kernel.org
Tested-by: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230223152048.20878-1-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
(cherry picked from commit 2553bacaf953b48c59357f5a622282bc0c45adae)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
lock the fbdev obj before calling into
i915_vma_pin_iomap(). This helps to solve below :
<7>[ 93.563308] i915 0000:00:02.0: [drm:intelfb_create [i915]] no BIOS fb, allocating a new one
<4>[ 93.581844] ------------[ cut here ]------------
<4>[ 93.581855] WARNING: CPU: 12 PID: 625 at drivers/gpu/drm/i915/gem/i915_gem_pages.c:424 i915_gem_object_pin_map+0x152/0x1c0 [i915]
Fixes: f0b6b01b3efe ("drm/i915: Add ww context to intel_dpt_pin, v2.")
Cc: Chris Wilson <chris.p.wilson@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230301201053.928709-5-radhakrishna.sripada@intel.com
(cherry picked from commit 561b31acfd65502a2cda2067513240fc57ccdbdc)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The commit 2357f2b271ad ("drm/i915/mtl: Initial display workarounds")
extended the workaround Wa_16015201720 to MTL. However the registers
that the original WA implemented moved for MTL.
Implement the workaround with the correct register.
v3: Skip clock gating for pipe C, D DMC's and fix the title
Fixes: 2357f2b271ad ("drm/i915/mtl: Initial display workarounds")
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230301201053.928709-2-radhakrishna.sripada@intel.com
(cherry picked from commit 0188be507b973e36f637ba010a369057c8cb7282)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.4-2023-03-17:
amdgpu:
- Misc code cleanups
- Documentation fixes
- Make kobj structures const
- Add thermal throttling adjustments for supported APUs
- UMC RAS fixes
- Display reset fixes
- DCN 3.2 fixes
- Freesync fixes
- DC code reorg
- Generalize dmabuf import to work with KFD
- DC DML fixes
- SRIOV fixes
- UVD code cleanups
- IH 4.4.2 updates
- HDP 4.4.2 updates
- SDMA 4.4.2 updates
- PSP 13.0.6 updates
- Add capped/uncapped workload handling for supported APUs
- DCN 3.1.4 updates
- Re-org DC Kconfig
- USB4 fixes
- Reorg DC plane and stream handling
- Register vga_switcheroo for apple-gmux
- SMU 13.0.6 updates
- Fix error checking in read_mm_registers functions for affected families
- VCN 4.0.4 fix
- Drop redundant pci_enable_pcie_error_reporting() call
- RDNA2 SMU OD suspend/resume fix
- Expose additional memory stats via fdinfo
- RAS fixes
- Misc display fixes
- DP MST fixes
- IOMMU regression fix for KFD
amdkfd:
- Make kobj structures const
- Support for exporting buffers via dmabuf
- Multi-VMA page migration fixes
- NBIO fixes
- Misc code cleanups
- Fix possible double free
- Fix possible UAF
radeon:
- iMac fix
UAPI:
- KFD dmabuf export support. Required for importing KFD buffers into GEM contexts and for RDMA P2P support.
Proposed user mode changes: https://github.com/fxkamd/ROCT-Thunk-Interface/commits/fxkamd/dmabuf
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230317164416.138340-1-alexander.deucher@amd.com
|
|
This was pointed out by Ville and Pekka in their replies, but
forgot to apply the change properly before pushing. Sorry for
the noise!
Signed-off-by: Simon Ser <contact@emersion.fr>
Fixes: 409f07d353b3 ("drm: document connector margin properties")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230305103503.42619-1-contact@emersion.fr
|
