| Age | Commit message (Collapse) | Author |
|---|
|
The commit renaming icl_tc_phy_is_in_safe_mode() to
icl_tc_phy_take_ownership() didn't flip the function's return value
accordingly, fix this up.
This didn't cause an actual problem besides state check errors, since
the function is only used during HW readout.
Cc: José Roberto de Souza <jose.souza@intel.com>
Fixes: f53979d68a77 ("drm/i915/display/tc: Rename safe_mode functions ownership")
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230316131724.359612-4-imre.deak@intel.com
(cherry picked from commit f2c7959dda614d9b7c6a41510492de39d31705ec)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Keeping DC states enabled is incompatible with the _noarm()/_arm()
split we use for writing pipe/plane registers. When DC5 and PSR
are enabled, all pipe/plane registers effectively become self-arming
on account of DC5 exit arming the update, and PSR exit latching it.
What probably saves us most of the time is that (with PIPE_MISC[21]=0)
all pipe register writes themselves trigger PSR exit, and then
we don't re-enter PSR until the idle frame count has elapsed.
So it may be that the PSR exit happens already before we've
updated the state too much.
Also the PSR1 panel (at least on this KBL) seems to discard the first
frame we trasmit, presumably still scanning out from its internal
framebuffer at that point. So only the second frame we transmit is
actually visible. But I suppose that could also be panel specific
behaviour. I haven't checked out how other PSR panels behave, nor
did I bother to check what the eDP spec has to say about this.
And since this really is all about DC states, let's switch from
the MODESET domain to the DC_OFF domain. Functionally they are
100% identical. We should probably remove the MODESET domain...
And for good measure let's toss in an assert to the place where
we do the _noarm() register writes to make sure DC states are
in fact off.
v2: Just use intel_display_power_is_enabled() (Imre)
Cc: <stable@vger.kernel.org> #v5.17+
Cc: Manasi Navare <navaremanasi@google.com>
Cc: Drew Davenport <ddavenport@chromium.org>
Cc: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Fixes: d13dde449580 ("drm/i915: Split pipe+output CSC programming to noarm+arm pair")
Fixes: f8a005eb8972 ("drm/i915: Optimize icl+ universal plane programming")
Fixes: 890b6ec4a522 ("drm/i915: Split skl+ plane update into noarm+arm pair")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320183532.17727-1-ville.syrjala@linux.intel.com
(cherry picked from commit 41b4c7fe72b6105a4b49395eea9aa40cef94288d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Unlike SKL/GLK the ICL CSC unit suffers from a new issue where
CSC_MODE arming is sticky. That is, once armed it remains armed
causing the CSC coeff/offset registers to become effectively
self-arming.
CSC coeff/offset registers writes no longer disarm the CSC,
but fortunately register read still do. So we can use that
to disarm the CSC unit once the registers for the current
frame have been latched. This avoid s the self-arming behaviour
from persisting into the next frame's .color_commit_noarm()
call.
Cc: <stable@vger.kernel.org> #v5.19+
Cc: Manasi Navare <navaremanasi@google.com>
Cc: Drew Davenport <ddavenport@chromium.org>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Fixes: d13dde449580 ("drm/i915: Split pipe+output CSC programming to noarm+arm pair")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320095438.17328-5-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit 92736f1b452bbb8a66bdb5b1d263ad00e04dd3b8)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
We're going to need stuff after the color management
register latching has happened. Add a corresponding hook.
Cc: <stable@vger.kernel.org> #v5.19+
Cc: Manasi Navare <navaremanasi@google.com>
Cc: Drew Davenport <ddavenport@chromium.org>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320095438.17328-4-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit 3962ca4e080a525fc9eae87aa6b2286f1fae351d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
skl/glk
SKL/GLK CSC unit suffers from a nasty issue where a CSC
coeff/offset register read or write between DC5 exit and
PSR exit will undo the CSC arming performed by DMC, and
then during PSR exit the hardware will latch zeroes into
the active CSC registers. This causes any plane going
through the CSC to output all black.
We can sidestep the issue by making sure the PSR exit has
already actually happened before we touch the CSC coeff/offset
registers. Easiest way to guarantee that is to just move the
CSC programming back into the .color_commir_arm() as we force
a PSR exit (and crucially wait for it to actually happen)
prior to touching the arming registers.
When PSR (and thus also DC states) are disabled we don't
have anything to worry about, so we can keep using the
more optional _noarm() hook for writing the CSC registers.
Cc: <stable@vger.kernel.org> #v5.19+
Cc: Manasi Navare <navaremanasi@google.com>
Cc: Drew Davenport <ddavenport@chromium.org>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8283
Fixes: d13dde449580 ("drm/i915: Split pipe+output CSC programming to noarm+arm pair")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320095438.17328-3-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit 80a892a4c2428b65366721599fc5fe50eaed35fd)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
We're going to want different behavior for skl/glk vs. icl
in .color_commit_noarm(), so split the hook into two. Arguably
we already had slightly different behaviour since
csc_enable/gamma_enable are never set on icl+, so the old
code was perhaps a bit confusing as well.
Cc: <stable@vger.kernel.org> #v5.19+
Cc: Manasi Navare <navaremanasi@google.com>
Cc: Drew Davenport <ddavenport@chromium.org>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320095438.17328-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit f161eb01f50ab31f2084975b43bce54b7b671e17)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Expose intel_rps_read_actual_frequency_fw to read the actual freq without
taking forcewake for use by PMU. The code is refactored to use a common set
of functions across sysfs and PMU. Using common functions with sysfs in PMU
solves the issues of missing support for MTL and missing support for older
generations (prior to Gen6). It also future proofs the PMU where sometimes
code has been updated for sysfs and PMU has been missed.
v2: Remove runtime_pm_if_in_use from read_actual_frequency_fw (Tvrtko)
v3: (Tvrtko)
- Remove goto in __read_cagf
- Unexport intel_rps_get_cagf and intel_rps_read_punit_req
Fixes: 22009b6dad66 ("drm/i915/mtl: Modify CAGF functions for MTL")
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8280
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230316004800.2539753-1-ashutosh.dixit@intel.com
(cherry picked from commit 44df42e66139b5fac8db49ee354be279210f9816)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
There are 2 banks on it6505, and when writing to different bank,
REG_BANK_SEL needs to be set to the targeted bank. The current code set
this additionally, which causes a race condition when a process is
writing bank 0 registers while another process set the bank to 1. Set
ranges in regmap config so the regmap API would handle the bank changes.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230327044804.3657551-1-hsinyi@chromium.org
|
|
Move the one-time RPMh setup to a6xx_gmu_init(). To get rid of the hack
for one-time init vs start, add in an extra a6xx_rpmh_stop() at the end
of the init sequence.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527854/
Link: https://lore.kernel.org/r/20230320144356.803762-15-robdclark@gmail.com
|
|
These allocations are only done the first (successful) time through
hw_init() so they won't actually happen in the job_run() path. But
lockdep doesn't know this. So dis-entangle them from the hw_init()
path.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527852/
Link: https://lore.kernel.org/r/20230320144356.803762-14-robdclark@gmail.com
|
|
It is already a no-op, since we've already loaded the fw from
adreno_load_gpu(), so drop the redundant call.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527849/
Link: https://lore.kernel.org/r/20230320144356.803762-13-robdclark@gmail.com
|
|
Avoid allocation under idr_lock, to prevent deadlock against the
job_free() path (which runs on same thread as job_run(), which makes
it also part of the fence-signaling path.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527847/
Link: https://lore.kernel.org/r/20230320144356.803762-12-robdclark@gmail.com
|
|
Needed to idr_preload() which returns with preemption disabled.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527846/
Link: https://lore.kernel.org/r/20230320144356.803762-11-robdclark@gmail.com
|
|
Now that everything that controls which LRU an obj lives in *except* the
backing pages is protected by the LRU lock, add a special path to unpin
in the job_run() path, where we are assured that we already have backing
pages and will not be racing against eviction (because the GEM object's
dma_resv contains the fence that will be signaled when the submit/job
completes).
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527845/
Link: https://lore.kernel.org/r/20230320144356.803762-10-robdclark@gmail.com
|
|
Since the LRU lock is already acquired when moving an obj between LRUs,
we can use it to protect pin_count and madv, without any significant
change in locking (ie. it just expands the scope of the lock by a hand-
ful of instructions). This prepares the way to decrement the pin_count
in the job_run() path without needing to hold the obj lock, to avoid a
potential deadlock (or rather stall) caused by the fence-signaling path
(job_run()) blocking on shrinker/reclaim. (Only a stall because the
wait for fence signaling wait_for_idle() is not infinite.)
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527843/
Link: https://lore.kernel.org/r/20230320144356.803762-9-robdclark@gmail.com
|
|
Just code-motion.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527841/
Link: https://lore.kernel.org/r/20230320144356.803762-8-robdclark@gmail.com
|
|
Export the locked version or lru's move_tail().
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527835/
Link: https://lore.kernel.org/r/20230320144356.803762-7-robdclark@gmail.com
|
|
vmap'ing is just pinning in disguise. So treat it as such and simplify
the LRU tracking.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527837/
Link: https://lore.kernel.org/r/20230320144356.803762-6-robdclark@gmail.com
|
|
We need to use the inuse count to track that a BO is pinned until
we have the hw_fence. But we want to remove the obj lock from the
job_run() path as this could deadlock against reclaim/shrinker
(because it is blocking the hw_fence from eventually being signaled).
So split that tracking out into a per-vma lock with narrower scope.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527839/
Link: https://lore.kernel.org/r/20230320144356.803762-5-robdclark@gmail.com
|
|
Stop open coding VMA construction, which will be needed in the next
commit. And since the VMA already has a ptr to the adress space, stop
passing that around everywhere. (Also, an aspace always has an mmu so
we can drop a couple pointless NULL checks.)
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527833/
Link: https://lore.kernel.org/r/20230320144356.803762-4-robdclark@gmail.com
|
|
The flags are only accessed (1) when submit is constructed, before
enqueuing to gpu sched (ie. when still visible to only the task calling
the submit ioctl), (2) here, where we own a reference to the submit and
are serialized on the gpu sched thread, and (3) after the submit is
retired and last reference is dropped, which is serialized on the
submit's reference count. Hence locking is unneeded here.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527830/
Link: https://lore.kernel.org/r/20230320144356.803762-3-robdclark@gmail.com
|
|
Avoid allocating memory in job_run() by pre-allocating the hw_fence.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527832/
Link: https://lore.kernel.org/r/20230320144356.803762-2-robdclark@gmail.com
|
|
The drmm_encoder_alloc() function returns error pointers. It never
returns NULL. Fix the check accordingly.
Fixes: 7a1adbd23990 ("drm: rcar-du: Use drmm_encoder_alloc() to manage encoder")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
The DORCR register controls the routing of clocks and data between DU
channels within a group. For groups that contain a single channel,
there's no routing option to control, and some fields of the register
are then reserved. On Gen2 those reserved fields are documented as
required to be set to 0, while on Gen3 and newer the PG1T, DK1S and PG1D
reserved fields must be set to 1.
The DU driver initializes the DORCR register in rcar_du_group_setup(),
where it ignores the PG1T, DK1S and PG1D, and then configures those
fields to the correct value in rcar_du_group_set_routing(). This hasn't
been shown to cause any issue, but prevents certifying that the driver
complies with the documentation in safety-critical use cases.
As there is no reasonable change that the documentation will be updated
to clarify that those reserved fields can be written to 0 temporarily
before starting the hardware, make sure that the registers are always
set to valid values.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
The DORCR fields were documented in the R-Car H1 datasheet with 1-based
named, and then got renamed to 0-based in Gen2. The 0-based names are
used for Gen3 and Gen4, making H1 an outlier. Rename the field macros to
make them 0-based, in order to increase readability of the code when
comparing it with the documentation.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
When the input to a DU channel comes from a VSP, the DU doesn't perform
any blending operation. Select XRGB8888 instead of ARGB8888 to ensure
that the corresponding registers don't get written with invalid values.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
The ESCR and OTAR registers are not present in all DU channels on Gen3
SoCs. ESCR only exists in channels that can be routed to an LVDS or
DPAD, and OTAR in channels that can be routed to a DPAD. Skip writing
those registers for other channels. This replaces the DU gen check, as
Gen4 doesn't have LVDS or DPAD outputs.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
On R-Car D3 and E3, the LVDS encoder provides the dot (pixel) clock to
the DU, regardless of whether the LVDS output is used or not. When using
the DPAD (RGB) output, the DU driver thus enables and disables the LVDS
PLL manually, while when using the LVDS output, it lets the LVDS bridge
driver handle the PLL configuration internally as part of the atomic
enable and disable operations.
This causes an issue when using the LVDS output. As bridges are disabled
before CRTCs, the current implementation violates the enable/disable
sequences documented in the hardware datasheet, which requires the dot
clock to be enabled before the CRTC is started and disabled after it
gets stopped.
Fix the problem by enabling/disabling the LVDS PLL manually from the DU
regardless of which output is used, and skipping the PLL handling in the
LVDS bridge atomic enable and disable operations.
This is however not enough. Disabling the LVDS encoder while leaving the
PLL on still results in a vertical blanking wait timeout when disabling
the DU. Investigation showed that the culprit is the LVEN bit. For an
unclear reason, clearing the bit when disabling the LVDS encoder blocks
vertical blanking interrupts. We thus have to delay disabling the whole
LVDS encoder, not just disabling the PLL, until the DU is disabled.
We could split the LVDS disable sequence by clearing the LVRES bit in
the LVDS bridge atomic disable handler, and delaying the rest of the
operations, in order to disable the LVDS output at bridge atomic disable
time, before stopping the CRTC. This would make the code more complex,
without a clear benefit, so keep the implementation simple(r).
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
|
|
To prepare for a rework of the LVDS disable code, which will need to be
called from rcar_lvds_pclk_disable(), move the LVDS enable code,
currently stored in the __rcar_lvds_atomic_enable() function, to a
separate code section separate from bridge operations. It will be then
extended with the LVDS disable code.
As part of this rework the __rcar_lvds_atomic_enable() function is
renamed to rcar_lvds_enable() to more clearly indicate its purpose.
No functional change intended.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
|
|
When disabling the companion bridge in rcar_lvds_atomic_disable(),
there's no need to go through the bridge's operations to call
.atomic_disable(). Call rcar_lvds_atomic_disable() on the companion
directly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
|
|
Selecting CONFIG_PM_GENERIC_DOMAINS causes a build failure when CONFIG_PM
is not enabled:
WARNING: unmet direct dependencies detected for PM_GENERIC_DOMAINS
Depends on [n]: PM [=n]
Selected by [m]:
- DRM_MSM [=m] && HAS_IOMEM [=y] && DRM [=m] && (ARCH_QCOM [=y] || SOC_IMX5 || COMPILE_TEST [=y]) && COMMON_CLK [=y] && IOMMU_SUPPORT [=y] && (QCOM_OCMEM [=y] || QCOM_OCMEM [=y]=n) && (QCOM_LLCC [=n] || QCOM_LLCC [=n]=n) && (QCOM_COMMAND_DB [=y] || QCOM_COMMAND_DB [=y]=n) && DEVFREQ_GOV_SIMPLE_ONDEMAND [=y]
drivers/base/power/domain.c:654:13: error: use of undeclared identifier 'pm_wq'
queue_work(pm_wq, &genpd->power_off_work);
^
drivers/base/power/domain.c:853:26: error: no member named 'ignore_children' in 'struct dev_pm_info'
if (!dev || dev->power.ignore_children)
~~~~~~~~~~ ^
Fixes: c11fa1204fe9 ("drm/msm/a6xx: Use genpd notifier to ensure cx-gdsc collapse")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/528597/
Link: https://lore.kernel.org/r/20230324095502.3289094-1-arnd@kernel.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Earlier merge dropped an if block when applying the patch -
"drm/i915/mtl: Synchronize i915/BIOS on C6 enabling". Bring back the
if block as the check is required by - "drm/i915/mtl: Disable MC6 for MTL
A step" to disable C6 on media for A0 stepping.
Fixes: 3735040978a4 ("drm/i915/mtl: Synchronize i915/BIOS on C6 enabling")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230324213918.75212-1-umesh.nerlige.ramappa@intel.com
|
|
Currently we have no sane way to forcibly disable SAGV, which
makes debugging things a PITA. Manually poking at the pcode
mailbox with it's various SAGV/QGV/PSF formats is no fun,
and likely to be clobbered by the driver anyway.
Let's add a modparam for this.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230322181219.5511-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
All other skl+ universal plane register bit definitions are next
to the pipe A register definition. Move the PLANE_BUF_CFG bit
definitions there as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320090522.9909-7-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
|
|
Add i915.enable_dpt modparam to allow disabling the DPT
usage in hardware via the chicken bit. Useful when debugging
potential DPT issues.
Quickly smoke tested on ADL.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320090522.9909-6-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
Core Changes:
- drm: Add SDP Error Detection Configuration Register (Arun)
Driver Changes:
- Meteor Lake enabling and fixes (RK, Jose, Madhumitha)
- Lock the fbdev obj before vma pin (Tejas)
- DSC fixes (Stanislav)
- Fixes and clean-up on opregion code (Imre)
- More wm/vblank stuff (Ville)
- More general display code organization (Jani)
- DP Fixes (Stanislav, Ville)
- Introduce flags to ignore long HPD and link training issues \
for handling spurious issues on CI (Vinod)
- Plane cleanups and extra registers (Ville)
- Update audio keepalive clock values (Clint)
- Rename find_section to bdb_find_section (Maarten)
- DP SDP CRC16 for 128b132b link layer (Arun)
- Fix various issues with noarm register writes (Ville)
- Fix a few TypeC / MST issues (Imre)
- Create GSC submission targeting HDCP and PXP usages on MTL+ (Suraj)
- Enable HDCP2.x via GSC CS (Suraj)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZBy56qc9C00tCLOY@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.4-rc1:
Core Changes:
- Add unit test for xrgb8888 to mono.
- Assorted small fixes to format helper selftests.
- Assorted documentation updates.
- Drop drm_dev_set_unique.
- Always use shadow buffer in generic fbdev emulation helpers, and
improve error handling.
Driver Changes:
- Assorted small fixes to malidp, hdlcd, gma500, lima, bridge, rockchip.
- Move fbdev in gma500 to use drm_client.
- Convert bridge platform callbacks to void return.
- Drop leftover from vgem to shmem helper conversion.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5a4c438e-7047-c044-fc77-5a3597000264@linux.intel.com
|
|
OAM does not work with media C6 enabled on some steppings of MTL.
Disable OAM if we detect that media C6 was enabled in bios.
v2: (Ashutosh)
- Remove drm_notice from the driver load path
- Log a drm_err when opening an OAM stream on affected steppings
v3:
- Initialize the engine group even if mc6 is enabled (Ashutosh)
- Checkpatch fix
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323225901.3743681-12-umesh.nerlige.ramappa@intel.com
|
|
In some cases, perf revision may rely on specific steppings of a
platform. To determine the platform, pass i915 object to the perf
revision helper.
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323225901.3743681-11-umesh.nerlige.ramappa@intel.com
|
|
MTL introduces additional OA units dedicated to media use cases. Add
support for programming these OA units by passing the media engine class
and instance parameters.
UMD specific changes for GPUvis support:
https://patchwork.freedesktop.org/patch/522827/?series=114023
https://patchwork.freedesktop.org/patch/522822/?series=114023
https://patchwork.freedesktop.org/patch/522826/?series=114023
https://patchwork.freedesktop.org/patch/522828/?series=114023
https://patchwork.freedesktop.org/patch/522816/?series=114023
https://patchwork.freedesktop.org/patch/522825/?series=114023
v2: (Ashutosh)
- check for IP_VER(12, 70) instead of MTL
- remove PERF_GROUP_OAG comment in mtl_oa_base
- remove oa_buffer.group
- use engine->oa_group->type in engine_supports_oa_format
- remove fw_domains and use FORCEWAKE_ALL
- remove MPES/MPEC comment
- s/xehp/mtl/ in b counter validation function name
- remove engine_supports_oa in __oa_engine_group
- remove warn_ON from __oam_engine_group
- refactor oa_init_groups and oa_init_regs
- assign g->type correctly
- use enum oa_type definition
v3: (Ashutosh)
- Drop oa_unit_functional as engine_supports_oa is enough
v4:
- s/DRM_DEBUG/drm_dbg/
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323225901.3743681-10-umesh.nerlige.ramappa@intel.com
|
|
One or more engines map to a specific OA unit. All reports from these
engines are captured in the OA buffer managed by this OA unit.
Current i915 OA implementation supports only the OAG unit. OAG primarily
caters to render engine, so i915 OA uses render as the default engine
in the OA implementation. Since there are more OA units on newer
hardware that map to other engines, allow user to pass engine class and
instance to select and program specific OA units.
UMD specific changes for GPUvis support:
https://patchwork.freedesktop.org/patch/522827/?series=114023
https://patchwork.freedesktop.org/patch/522822/?series=114023
https://patchwork.freedesktop.org/patch/522826/?series=114023
https://patchwork.freedesktop.org/patch/522828/?series=114023
https://patchwork.freedesktop.org/patch/522816/?series=114023
https://patchwork.freedesktop.org/patch/522825/?series=114023
v2: (Ashutosh)
- Clarify commit message
- Add drm_dbg
- Clarify uapi description
v3: (Ashutosh)
- Remove irrelevant info from the uapi comment
v4: Ensure engine class:instance is passed together (Ashutosh)
v5: Remove unnecessary quote (Ashutosh)
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323225901.3743681-9-umesh.nerlige.ramappa@intel.com
|
|
Some of the newer OA formats are not powers of 2. For those formats,
adjust the hw_tail accordingly when checking for new reports.
v2: (Ashutosh)
- Switch to OA_TAKEN for diff calculation
- Use OA_BUFFER_SIZE instead of the vma size
- Update comments
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323225901.3743681-8-umesh.nerlige.ramappa@intel.com
|
|
Now that OA formats come in flavor of 64 bit reports, the report header
has 64 bit report-id, timestamp, context-id and gpu-ticks fields. When
filtering these reports, use the right width for these fields.
Note that upper dword of context id is reserved, so squash lower dword
only.
v2: (Ashutosh)
- Drop inline
- Update comment with dword definitions - report id and timestamp
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323225901.3743681-7-umesh.nerlige.ramappa@intel.com
|
|
i915_perf_init can fail due to OOM. Fail driver init if i915_perf_init
fails.
v2: (Jani)
- Reorder patch in the series
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323225901.3743681-6-umesh.nerlige.ramappa@intel.com
|
|
Now that we may have multiple OA units in a single GT as well as on
separate GTs, create an engine group that maps to a single OA unit.
v2: (Jani)
- Drop warning on ENOMEM
- Reorder patch in the series
v3: (Ashutosh)
- Remove unused members from perf structs
- Update comments
- Update engine_supports_oa check
- Just return 1 in num_perf_groups_per_gt for now
- Set engine->oa_group to NULL to begin with
v4: Use engine_supports_oa() check in oa_init_reg_state (Ashutosh)
v5: Rebase after dropping engine_supports_oa helper
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323225901.3743681-5-umesh.nerlige.ramappa@intel.com
|
|
Once OA supports media engine class:instance, the engine can only be
validated outside the switch since class and instance parameters are
separate entities. Since OA sseu config depends on engine
class:instance, validate OA sseu config outside the switch.
v2: (Ashutosh)
- Clarify commit message
- Use drm_dbg instead of DRM_DEBUG
- Reorder stack variables
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323225901.3743681-4-umesh.nerlige.ramappa@intel.com
|
|
If BIOS enables/disables C6, i915 should do the same. Also, retain
this value across driver reloads. This is needed only for MTL as
of now due to an existing bug in OA which needs C6 disabled for
it to function. BIOS behavior is also different across platforms
in terms of how C6 is enabled.
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323225901.3743681-3-umesh.nerlige.ramappa@intel.com
|
|
If we fail to adjust the GuC run-control on opening the perf stream,
make sure we unwind the wakeref just taken.
v2: Retain old goto label names (Ashutosh)
v3: Drop bitfield boolean
Fixes: 01e742746785 ("drm/i915/guc: Support OA when Wa_16011777198 is enabled")
Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323225901.3743681-2-umesh.nerlige.ramappa@intel.com
|
|
Define the PLANE_CHICKEN register offsets.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320090522.9909-5-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
|
|
Replace the hand rolled DISPLAY_VER check for a more descriptive
HAS_DPT() macro. Will be used on more than one place later.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320090522.9909-4-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
|
