| Age | Commit message (Collapse) | Author |
|---|
|
This was left global by accident, the corresponding functions for other hardware types are already static:
drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:1072:6: error: no previous prototype for function 'gfx_v9_4_3_disable_gpa_mode' [-Werror,-Wmissing-prototypes]
Fixes: 86301129698b ("drm/amdgpu: split gc v9_4_3 functionality from gc v9_0")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Instead of the default one, check the right mqd_backup object.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Cc: Le Ma <le.ma@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This should be a typo when intruducing multi-xx support.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Cc: Le Ma <le.ma@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
gcc with W=1 reports
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:
In function ‘dc_dmub_srv_optimized_init_done’:
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:184:26:
error: variable ‘dmub’ set but not used [-Werror=unused-but-set-variable]
184 | struct dmub_srv *dmub;
| ^~~~
The return status is never set.
It looks like a call to dmub_srv_get_fw_boot_status is missing.
Fixes: 499e4b1c722e ("drm/amd/display: add mechanism to skip DCN init")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
storage-class-specifier to static
smatch reports
drivers/gpu/drm/amd/amdgpu/../display/modules/power/power_helpers.c:119:31:
warning: symbol 'custom_backlight_curve0' was not declared. Should it be static?
This variable is only used in its defining file, so it should be static
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The gmc.ecc_irq is enabled by firmware per IFWI setting,
and the host driver is not privileged to enable/disable
the interrupt. So, it is meaningless to use the amdgpu_irq_put
function in gmc_v10_0_hw_fini, which also leads to the call
trace.
[ 82.340264] Call Trace:
[ 82.340265] <TASK>
[ 82.340269] gmc_v10_0_hw_fini+0x83/0xa0 [amdgpu]
[ 82.340447] gmc_v10_0_suspend+0xe/0x20 [amdgpu]
[ 82.340623] amdgpu_device_ip_suspend_phase2+0x127/0x1c0 [amdgpu]
[ 82.340789] amdgpu_device_ip_suspend+0x3d/0x80 [amdgpu]
[ 82.340955] amdgpu_device_pre_asic_reset+0xdd/0x2b0 [amdgpu]
[ 82.341122] amdgpu_device_gpu_recover.cold+0x4dd/0xbb2 [amdgpu]
[ 82.341359] amdgpu_debugfs_reset_work+0x4c/0x70 [amdgpu]
[ 82.341529] process_one_work+0x21d/0x3f0
[ 82.341535] worker_thread+0x1fa/0x3c0
[ 82.341538] ? process_one_work+0x3f0/0x3f0
[ 82.341540] kthread+0xff/0x130
[ 82.341544] ? kthread_complete_and_exit+0x20/0x20
[ 82.341547] ret_from_fork+0x22/0x30
Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The gmc.ecc_irq is enabled by firmware per IFWI setting,
and the host driver is not privileged to enable/disable
the interrupt. So, it is meaningless to use the amdgpu_irq_put
function in gmc_v11_0_hw_fini, which also leads to the call
trace.
[ 102.980303] Call Trace:
[ 102.980303] <TASK>
[ 102.980304] gmc_v11_0_hw_fini+0x54/0x90 [amdgpu]
[ 102.980357] gmc_v11_0_suspend+0xe/0x20 [amdgpu]
[ 102.980409] amdgpu_device_ip_suspend_phase2+0x240/0x460 [amdgpu]
[ 102.980459] amdgpu_device_ip_suspend+0x3d/0x80 [amdgpu]
[ 102.980520] amdgpu_device_pre_asic_reset+0xd9/0x490 [amdgpu]
[ 102.980573] amdgpu_device_gpu_recover.cold+0x548/0xce6 [amdgpu]
[ 102.980687] amdgpu_debugfs_reset_work+0x4c/0x70 [amdgpu]
[ 102.980740] process_one_work+0x21f/0x3f0
[ 102.980741] worker_thread+0x200/0x3e0
[ 102.980742] ? process_one_work+0x3f0/0x3f0
[ 102.980743] kthread+0xfd/0x130
[ 102.980743] ? kthread_complete_and_exit+0x20/0x20
[ 102.980744] ret_from_fork+0x22/0x30
Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
The selfring doorbell aperture will change when resize FB
BAR successfully during gmc sw init, we should reorder
the sequence of enabling doorbell selfring aperture.
[How]
Move enable_doorbell_selfring_aperture from *_common_hw_init
to *_common_late_init.
This fixes the potential issue that GPU ring its own
doorbell when this device is in translated mode when
iommu is on.
v2: Remove *_enable_doorbell_aperture functions (Christian)
v3: Add comments to note that why we need enable doorbell
selfring late (Christian)
Signed-off-by: Shane Xiao <shane.xiao@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Tested-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Christian K�nig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix following checkpatch errors in amdgpu_display.c
ERROR: spaces required around that '=' (ctx:VxW)
ERROR: that open brace { should be on the previous line
ERROR: else should follow close brace '}'
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
if check over DSC passthrough is removed, as this is not for
MST use case. It is for DP-HDMI pcon use case. sst pcon is
detected as sst not mst. In sst pcon dsc passthrough message
will not get below log printed
Fixes: 9b035d089086 ("drm/amd/display: Check & log if receiver supports MST, DSC & FEC.")
Suggested-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Below call trace and errors are observed when reloading
amdgpu driver with the module parameter reset_method=3.
It should do a default reset when loading or reloading the
driver, regardless of the module parameter reset_method.
v2: add comments inside and modify commit messages.
[ +2.180243] [drm] psp gfx command ID_LOAD_TOC(0x20) failed
and response status is (0x0)
[ +0.000011] [drm:psp_hw_start [amdgpu]] *ERROR* Failed to load toc
[ +0.000890] [drm:psp_hw_start [amdgpu]] *ERROR* PSP tmr init failed!
[ +0.020683] [drm:amdgpu_fill_buffer [amdgpu]] *ERROR* Trying to
clear memory with ring turned off.
[ +0.000003] RIP: 0010:amdgpu_bo_release_notify+0x1ef/0x210 [amdgpu]
[ +0.000004] Call Trace:
[ +0.000003] <TASK>
[ +0.000008] ttm_bo_release+0x2c4/0x330 [amdttm]
[ +0.000026] amdttm_bo_put+0x3c/0x70 [amdttm]
[ +0.000020] amdgpu_bo_free_kernel+0xe6/0x140 [amdgpu]
[ +0.000728] psp_v11_0_ring_destroy+0x34/0x60 [amdgpu]
[ +0.000826] psp_hw_init+0xe7/0x2f0 [amdgpu]
[ +0.000813] amdgpu_device_fw_loading+0x1ad/0x2d0 [amdgpu]
[ +0.000731] amdgpu_device_init.cold+0x108e/0x2002 [amdgpu]
[ +0.001071] ? do_pci_enable_device+0xe1/0x110
[ +0.000011] amdgpu_driver_load_kms+0x1a/0x160 [amdgpu]
[ +0.000729] amdgpu_pci_probe+0x179/0x3a0 [amdgpu]
Signed-off-by: lyndonli <Lyndon.Li@amd.com>
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Before this change, sienna_cichlid_get_reset_handler will always
return NULL, although the module parameter reset_method is 3
when loading amdgpu driver.
Signed-off-by: lyndonli <Lyndon.Li@amd.com>
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
OpenGL EXT_robustness extension expects the driver to stop reporting
GUILTY_CONTEXT_RESET when the reset has completed and the GPU is ready
to accept submission again.
This commit adds a AMDGPU_CTX_QUERY2_FLAGS_RESET_IN_PROGRESS flag,
that let the UMD know that the reset is still not finished.
Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22290
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It is likely p1_min_meta_chunk_bytes was expected here, instead of
min_meta_chunk_bytes.
Test the correct variable.
Fixes: dda4fb85e433 ("drm/amd/display: DML changes for DCN32/321")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It is likely Height was expected here, instead of Width.
Test the correct variable.
Fixes: 17529ea2acfa ("drm/amd/display: Optimizations for DML math")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
smatch warning - inconsistent handling of buffer object reserve
and unreserve.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sukrut Bellary <sukrut.bellary@linux.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
clang with W=1 reports
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn314/display_rq_dlg_calc_314.c:1003:15:
error: variable 'dispclk_delay_subtotal' set but not used [-Werror,-Wunused-but-set-variable]
unsigned int dispclk_delay_subtotal;
^
This variable is not used, so remove it.
Which made dout unused, so also remove.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes:
- I915_GEM_CREATE_EXT_SET_PAT for Mesa on Meteorlake.
Driver Changes:
Fixes/improvements/new stuff:
- Use large rings for compute contexts (Chris Wilson)
- Better logging/debug of unexpected GuC communication issues (Michal Wajdeczko)
- Clear out entire reports after reading if not power of 2 size (Ashutosh Dixit)
- Limit lmem allocation size to succeed on SmallBars (Andrzej Hajda)
- perf/OA capture robustness improvements on DG2 (Umesh Nerlige Ramappa)
- Fix error code in intel_gsc_uc_heci_cmd_submit_nonpriv() (Dan Carpenter)
Future platform enablement:
- Add workaround 14016712196 (Tejas Upadhyay)
- HuC loading for MTL (Daniele Ceraolo Spurio)
- Allow user to set cache at BO creation (Fei Yang)
Miscellaneous:
- Use system include style for drm headers (Jani Nikula)
- Drop legacy CTB definitions (Michal Wajdeczko)
- Turn off the timer to sample frequencies when GT is parked (Ashutosh Dixit)
- Make PMU sample array two-dimensional (Ashutosh Dixit)
- Use the correct error value when kernel_context() fails (Andi Shyti)
- Fix second parameter type of pre-gen8 pte_encode callbacks (Nathan Chancellor)
- Fix parameter in gmch_ggtt_insert_{entries, page}() (Nathan Chancellor)
- Fix size_t format specifier in gsccs_send_message() (Nathan Chancellor)
- Use the fdinfo helper (Tvrtko Ursulin)
- Add some missing error propagation (Tvrtko Ursulin)
- Reduce I915_MAX_GT to 2 (Matt Atwood)
- Rename I915_PMU_MAX_GTS to I915_PMU_MAX_GT (Matt Atwood)
- Remove some obsolete definitions (John Harrison)
Merges:
- Merge drm/drm-next into drm-intel-gt-next (Tvrtko Ursulin)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZIH09fqe5v5yArsu@tursulin-desk
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
drm/i915 features for v6.5:
Features and functionality:
- Meteorlake (MTL) display enabling (Mika, Radhakrishna, José, Ankit, Clint,
Gustavo, Imre, Anusha, Juha-Pekka, Matt)
- Allow VRR to be toggled during fastsets (Ville)
- Allow arbitrary refresh rates with VRR eDP panels (Ville)
- Support async flips on linear buffers on display ver 12+ (Arun)
- New debugfs for display clock frequencies (Bhanuprakash)
- Taint kernel when force probing unsupported devices (Jani)
- Expose CRTC CTM property on ILK/SNB/VLV (Ville)
DRM subsystem changes:
- EDID changes to support further conversion to struct drm_edid (Jani)
- Move i915 DSC parameter code to common DRM helpers (Dmitry Baryshkov)
Refactoring and cleanups:
- CSC color refactoring (Ville)
- VRR cleanups (Ville)
- Finish i915 conversion to struct drm_edid (Jani)
- Start high level display driver file (Jani)
- Hotplug refactoring (Ville)
- Misc display refactoring and cleanups (Jani, Ville)
- Use device based logging for state checker warnings (Jani)
- Split out hotplug and display irq handling (Jani)
- Move display device info and probe under display/ (Matt)
- HDCP cleanups (Suraj)
- Use localized warning ignores instead of per file (Jani)
- Remove superfluous enum i915_drm_suspend_mode (Maarten)
- PSR, pfit, scaler and chicken register definition cleanups (Ville)
- Constify pointers to hwmon_channel_info (Krzysztof Kozlowski)
- Replace all non-returning strlcpy with strscpy (Azeem Shaikh)
- Refactor VBT aux channel and DDC pin mapping (Ville)
- Include cleanups (Jani)
Fixes:
- Fix modeset locking issue in DP MST HDCP (Suraj)
- Fix disconnected Type-C/DP-alt disable at probe (Imre)
- Fix HDMI PCON DSC usage and color conversions (Ankit)
- Fix g4x HDMI infoframe/audio transmission port usage (Ville)
- Avoid use-after-free when DP connector init fails (Maarten)
- Fix voltage level for 480 MHz CDCLK (Chaitanya)
- Check HPD live state during eDP probe (Ville)
- Fix active port PLL selection for secondary MST streams (Imre)
- Check pipe source size when using SKL+ scalers (Ville)
- Fix MIPI DSI sleep sequences (Hans de Goede)
- Fix DPCD register write order to match 128b/132b requirement (Arun)
- Increase AUX timeout for Type-C (Suraj)
- Communicate display power demands to pcode (Stan)
- Fix potential division by zero in DSC compute config (Nikita Zhandarovich)
- Fix fast wake AUX sync length (Jouni)
- Fix potential oops on intel_get_crtc_new_encoder() (Ville)
Merges:
- drm-next backmerges (Rodrigo, Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87zg5eat32.fsf@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.5:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
Driver Changes:
* bridge
* imx: Fix module linking
* tc358762: Support reset GPIO
* meson
* Add support for MIPI DSI displays; plus fixes and DT bindings
* panel
* Add Support for Rocktech RK043FN48H; plus DT bindings
* Add support for Starry himax83102-j02; plus DT bindings
* Add support for Starry ili9882t; plus DT bindings
* virtio
* Support sync-object UAPI
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230607085644.GA12673@linux-uq9g
|
|
The Tegra sor pad clock implements a mux with a set_parent hook, but
doesn't provide a determine_rate implementation.
This is a bit odd, since set_parent() is there to, as its name implies,
change the parent of a clock. However, the most likely candidates to
trigger that parent change are either the assigned-clock-parents device
tree property or a call to clk_set_rate(), with determine_rate()
figuring out which parent is the best suited for a given rate.
The other trigger would be a call to clk_set_parent(), but it's far less
used, and it doesn't look like there's any obvious user for that clock.
Similarly, it doesn't look like the device tree using that clock driver
uses any of the assigned-clock properties on that clock.
So, the set_parent hook is effectively unused, possibly because of an
oversight. However, it could also be an explicit decision by the
original author to avoid any reparenting but through an explicit call to
clk_set_parent().
The latter case would be equivalent to setting the determine_rate
implementation to clk_hw_determine_rate_no_reparent(). Indeed, if no
determine_rate implementation is provided, clk_round_rate() (through
clk_core_round_rate_nolock()) will call itself on the parent if
CLK_SET_RATE_PARENT is set, and will not change the clock rate
otherwise.
And if it was an oversight, then we are at least explicit about our
behavior now and it can be further refined down the line.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Mikko Perttunen <mperttunen@nvidia.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20221018-clk-range-checks-fixes-v4-40-971d5077e7d2@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/msm into drm-fixes
A few more late fixes for v6.4-rc6
+ Fix max segment size to address splat on newer a6xx
+ Disable PSR by default w/ modparam to re-enable, since there
still seems to be a lingering issue
+ Fix HPD issue
+ Fix issue with unitialized GMU mutex
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGufjVZRNT6YfQ7YUXFC7Cz95wdLF7QHAYkiGfp+3Xc3DQ@mail.gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux into drm-next
Renesas DRM/KMS drivers:
- Group drivers in renesas subdirectory to prepare for new platform
- Drop deprecated R-Car H3 ES1.x support
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230602111504.GA24855@pendragon.ideasonboard.com
|
|
Move GMU mutex initialization earlier to make sure that it is always
initialized. a6xx_destroy can be called from ther failure path before
GMU initialization.
This fixes the following backtrace:
------------[ cut here ]------------
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 0 PID: 58 at kernel/locking/mutex.c:582 __mutex_lock+0x1ec/0x3d0
Modules linked in:
CPU: 0 PID: 58 Comm: kworker/u16:1 Not tainted 6.3.0-rc5-00155-g187c06436519 #565
Hardware name: Qualcomm Technologies, Inc. SM8350 HDK (DT)
Workqueue: events_unbound deferred_probe_work_func
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __mutex_lock+0x1ec/0x3d0
lr : __mutex_lock+0x1ec/0x3d0
sp : ffff800008993620
x29: ffff800008993620 x28: 0000000000000002 x27: ffff47b253c52800
x26: 0000000001000606 x25: ffff47b240bb2810 x24: fffffffffffffff4
x23: 0000000000000000 x22: ffffc38bba15ac14 x21: 0000000000000002
x20: ffff800008993690 x19: ffff47b2430cc668 x18: fffffffffffe98f0
x17: 6f74616c75676572 x16: 20796d6d75642067 x15: 0000000000000038
x14: 0000000000000000 x13: ffffc38bbba050b8 x12: 0000000000000666
x11: 0000000000000222 x10: ffffc38bbba603e8 x9 : ffffc38bbba050b8
x8 : 00000000ffffefff x7 : ffffc38bbba5d0b8 x6 : 0000000000000222
x5 : 000000000000bff4 x4 : 40000000fffff222 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff47b240cb1880
Call trace:
__mutex_lock+0x1ec/0x3d0
mutex_lock_nested+0x2c/0x38
a6xx_destroy+0xa0/0x138
a6xx_gpu_init+0x41c/0x618
adreno_bind+0x188/0x290
component_bind_all+0x118/0x248
msm_drm_bind+0x1c0/0x670
try_to_bring_up_aggregate_device+0x164/0x1d0
__component_add+0xa8/0x16c
component_add+0x14/0x20
dsi_dev_attach+0x20/0x2c
dsi_host_attach+0x9c/0x144
devm_mipi_dsi_attach+0x34/0xac
lt9611uxc_attach_dsi.isra.0+0x84/0xfc
lt9611uxc_probe+0x5b8/0x67c
i2c_device_probe+0x1ac/0x358
really_probe+0x148/0x2ac
__driver_probe_device+0x78/0xe0
driver_probe_device+0x3c/0x160
__device_attach_driver+0xb8/0x138
bus_for_each_drv+0x84/0xe0
__device_attach+0x9c/0x188
device_initial_probe+0x14/0x20
bus_probe_device+0xac/0xb0
deferred_probe_work_func+0x8c/0xc8
process_one_work+0x2bc/0x594
worker_thread+0x228/0x438
kthread+0x108/0x10c
ret_from_fork+0x10/0x20
irq event stamp: 299345
hardirqs last enabled at (299345): [<ffffc38bb9ba61e4>] put_cpu_partial+0x1c8/0x22c
hardirqs last disabled at (299344): [<ffffc38bb9ba61dc>] put_cpu_partial+0x1c0/0x22c
softirqs last enabled at (296752): [<ffffc38bb9890434>] _stext+0x434/0x4e8
softirqs last disabled at (296741): [<ffffc38bb989669c>] ____do_softirq+0x10/0x1c
---[ end trace 0000000000000000 ]---
Fixes: 4cd15a3e8b36 ("drm/msm/a6xx: Make GPU destroy a bit safer")
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/531540/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
The internal_hpd flag is set to true by dp_bridge_hpd_enable() and set to
false by dp_bridge_hpd_disable() to handle GPIO pinmuxed into DP controller
case. HDP related interrupts can not be enabled until internal_hpd is set
to true. At current implementation dp_display_config_hpd() will initialize
DP host controller first followed by enabling HDP related interrupts if
internal_hpd was true at that time. Enable HDP related interrupts depends on
internal_hpd status may leave system with DP driver host is in running state
but without HDP related interrupts being enabled. This will prevent external
display from being detected. Eliminated this dependency by moving HDP related
interrupts enable/disable be done at dp_bridge_hpd_enable/disable() directly
regardless of internal_hpd status.
Changes in V3:
-- dp_catalog_ctrl_hpd_enable() and dp_catalog_ctrl_hpd_disable()
-- rewording ocmmit text
Changes in V4:
-- replace dp_display_config_hpd() with dp_display_host_start()
-- move enable_irq() at dp_display_host_start();
Changes in V5:
-- replace dp_display_host_start() with dp_display_host_init()
Changes in V6:
-- squash remove enable_irq() and disable_irq()
Fixes: cd198caddea7 ("drm/msm/dp: Rely on hpd_enable/disable callbacks")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Tested-by: Leonard Lausen <leonard@lausen.nl> # on sc7180 lazor
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Tested-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/1684878756-17830-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v6.4-rc6:
- resume and modeset fixes for ast.
- Fill in fb-helper vars more correctly.
- Assorted ivpu fixes.
- lima context destroy fix.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ea6b88ec-b653-3781-0b68-cd0275c27923@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
Two fixups
- Fix wrong return in Exynos vidi driver.
- Fix use-after-free issue to Exynos g2d driver.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230607043148.43303-1-inki.dae@samsung.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
CDCLK voltage fix for ADL-P and eDP wake sync pulse fix.
Two error handling fixes to selftests (to appease static checkers)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZIGUHBz7+LsqN2nm@jlahtine-mobl.ger.corp.intel.com
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert the omap drm driver from always returning zero in the
remove callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-35-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-48-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert the rcar-du drm driver from always returning zero in
the remove callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-38-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-54-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert the vc4 drm drivers from always returning zero in the
remove callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-53-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-52-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-51-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert the tiny drm drivers from always returning zero in the
remove callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-50-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-47-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert the sun4i drm drivers from always returning zero in
the remove callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-44-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert the stm drm drivers from always returning zero in the
remove callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Raphaël Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-43-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert the sti drm drivers from always returning zero in the
remove callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-42-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert rockchip drm drivers from always returning zero in the
remove callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-39-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-37-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert the drm panel drivers from always returning zero in the
remove callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-36-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert the mxsfb driver from always returning zero in the
remove callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-33-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert meson drm drivers from always returning zero in the
remove callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-31-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert the mcde drm driver from always returning zero in the
remove callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-28-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-27-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-26-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert the hisilicon drm drivers from always returning zero
in the remove callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-21-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-20-u.kleine-koenig@pengutronix.de
|
