| Age | Commit message (Collapse) | Author |
|---|
|
This moves the initial effort to the latest 535 firmware.
The gsp msg structs have changed, and the message passing also.
The wpr also seems to have some struct changes.
This version of the firmware will be what we are stuck on for a while,
until we can refactor the driver and work out a better path forward.
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Removes space after opening parenthesis.
Fixes the checkpatch.pl error:
ERROR: space prohibited after that opening parenthesis '('
Signed-off-by: Dorcas AnonoLitunya <anonolitunya@gmail.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027174745.4058-1-anonolitunya@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Use acpi_evaluate_dsm_typed() instead of open-coding _DSM
evaluation to learn device characteristics (Andy Shevchenko)
- Tidy multi-function header checks using new PCI_HEADER_TYPE_MASK
definition (Ilpo Järvinen)
- Simplify config access error checking in various drivers (Ilpo
Järvinen)
- Use pcie_capability_clear_word() (not
pcie_capability_clear_and_set_word()) when only clearing (Ilpo
Järvinen)
- Add pci_get_base_class() to simplify finding devices using base
class only (ignoring subclass and programming interface) (Sui
Jingfeng)
- Add pci_is_vga(), which includes ancient PCI_CLASS_NOT_DEFINED_VGA
devices from before the Class Code was added to PCI (Sui Jingfeng)
- Use pci_is_vga() for vgaarb, sysfs "boot_vga", virtio, qxl to
include ancient VGA devices (Sui Jingfeng)
Resource management:
- Make pci_assign_unassigned_resources() non-init because sparc uses
it after init (Randy Dunlap)
Driver binding:
- Retain .remove() and .probe() callbacks (previously __init) because
sysfs may cause them to be called later (Uwe Kleine-König)
- Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device, so
it can be claimed by dwc3 instead (Vicki Pfau)
PCI device hotplug:
- Add Ampere Altra Attention Indicator extension driver for acpiphp
(D Scott Phillips)
Power management:
- Quirk VideoPropulsion Torrent QN16e with longer delay after reset
(Lukas Wunner)
- Prevent users from overriding drivers that say we shouldn't use
D3cold (Lukas Wunner)
- Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4
because wakeup interrupts from those states don't work if amd-pmc
has put the platform in a hardware sleep state (Mario Limonciello)
IOMMU:
- Disable ATS for Intel IPU E2000 devices with invalidation message
endianness erratum (Bartosz Pawlowski)
Error handling:
- Factor out interrupt enable/disable into helpers (Kai-Heng Feng)
Peer-to-peer DMA:
- Fix flexible-array usage in struct pci_p2pdma_pagemap in case we
ever use pagemaps with multiple entries (Gustavo A. R. Silva)
ASPM:
- Revert a change that broke when drivers disabled L1 and users later
enabled an L1.x substate via sysfs, and fix a similar issue when
users disabled L1 via sysfs (Heiner Kallweit)
Endpoint framework:
- Fix double free in __pci_epc_create() (Dan Carpenter)
- Use IS_ERR_OR_NULL() to simplify endpoint core (Ruan Jinjie)
Cadence PCIe controller driver:
- Drop unused "is_rc" member (Li Chen)
Freescale Layerscape PCIe controller driver:
- Enable 64-bit addressing in endpoint mode (Guanhua Gao)
Intel VMD host bridge driver:
- Fix multi-function header check (Ilpo Järvinen)
Microsoft Hyper-V host bridge driver:
- Annotate struct hv_dr_state with __counted_by (Kees Cook)
NVIDIA Tegra194 PCIe controller driver:
- Drop setting of LNKCAP_MLW (max link width) since dw_pcie_setup()
already does this via dw_pcie_link_set_max_link_width() (Yoshihiro
Shimoda)
Qualcomm PCIe controller driver:
- Use PCIE_SPEED2MBS_ENC() to simplify encoding of link speed
(Manivannan Sadhasivam)
- Add a .write_dbi2() callback so DBI2 register writes, e.g., for
setting the BAR size, work correctly (Manivannan Sadhasivam)
- Enable ASPM for platforms that use 1.9.0 ops, because the PCI core
doesn't enable ASPM states that haven't been enabled by the
firmware (Manivannan Sadhasivam)
Renesas R-Car Gen4 PCIe controller driver:
- Add DesignWare core support (set max link width, EDMA_UNROLL flag,
.pre_init(), .deinit(), etc) for use by R-Car Gen4 driver
(Yoshihiro Shimoda)
- Add driver and DT schema for DesignWare-based Renesas R-Car Gen4
controller in both host and endpoint mode (Yoshihiro Shimoda)
Xilinx NWL PCIe controller driver:
- Update ECAM size to support 256 buses (Thippeswamy Havalige)
- Stop setting bridge primary/secondary/subordinate bus numbers,
since PCI core does this (Thippeswamy Havalige)
Xilinx XDMA controller driver:
- Add driver and DT schema for Zynq UltraScale+ MPSoCs devices with
Xilinx XDMA Soft IP (Thippeswamy Havalige)
Miscellaneous:
- Use FIELD_GET()/FIELD_PREP() to simplify and reduce use of _SHIFT
macros (Ilpo Järvinen, Bjorn Helgaas)
- Remove logic_outb(), _outw(), outl() duplicate declarations (John
Sanpe)
- Replace unnecessary UTF-8 in Kconfig help text because menuconfig
doesn't render it correctly (Liu Song)"
* tag 'pci-v6.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (102 commits)
PCI: qcom-ep: Add dedicated callback for writing to DBI2 registers
PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word()
PCI: endpoint: Fix double free in __pci_epc_create()
PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver
dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx XDMA PCIe Root Port Bridge
PCI: xilinx-cpm: Move IRQ definitions to a common header
PCI: xilinx-nwl: Modify ECAM size to enable support for 256 buses
PCI: xilinx-nwl: Rename the NWL_ECAM_VALUE_DEFAULT macro
dt-bindings: PCI: xilinx-nwl: Modify ECAM size in the DT example
PCI: xilinx-nwl: Remove redundant code that sets Type 1 header fields
PCI: hotplug: Add Ampere Altra Attention Indicator extension driver
PCI/AER: Factor out interrupt toggling into helpers
PCI: acpiphp: Allow built-in drivers for Attention Indicators
PCI/portdrv: Use FIELD_GET()
PCI/VC: Use FIELD_GET()
PCI/PTM: Use FIELD_GET()
PCI/PME: Use FIELD_GET()
PCI/ATS: Use FIELD_GET()
PCI/ATS: Show PASID Capability register width in bitmasks
PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common()
...
|
|
Hide gpu error specifics in i915_gpu_error.c. This is also cleaner wrt
conditional compilation, as i915_gpu_error.c is only built with
DRM_I915_CAPTURE_ERROR=y.
With this, we can also make i915_first_error_state() static.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231031124502.1772160-3-jani.nikula@intel.com
|
|
Hide gpu error specifics in i915_gpu_error.c. This is also cleaner wrt
conditional compilation, as i915_gpu_error.c is only built with
DRM_I915_CAPTURE_ERROR=y.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231031124502.1772160-2-jani.nikula@intel.com
|
|
Not needed outside of i915_gpu_error.c.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231031124502.1772160-1-jani.nikula@intel.com
|
|
This is required to get the V3D module to load with Raspberry Pi 5.
Signed-off-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231031073859.25298-5-itoral@igalia.com
|
|
This patch updates a number of register addresses that have
been changed in Raspberry Pi 5 (V3D 7.1) and updates the
code to use the corresponding registers and addresses based
on the actual V3D version.
Signed-off-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231031073859.25298-3-itoral@igalia.com
|
|
We are preparing for Xe driver. Xe driver doesn't have i915_sw_fence
implementation. Lets drop i915_sw_fence usage from display code and
use dma_fence interfaces directly.
For this purpose stack dma fences from related objects into new plane
state. Drm_gem_plane_helper_prepare_fb can be used for fences in new
fb. Separate local implementation is used for Stacking fences from old fb
into new plane state. Then wait for these stacked fences during atomic
commit. There is no be need for separate GPU reset handling in
intel_atomic_commit_fence_wait as the fences are signaled when GPU hang is
detected and GPU is being reset.
v4:
- Drop to_new_plane_state suffix from add_dma_resv_fences
- Use dma_resv_usage_rw(false) (DMA_RESV_USAGE_WRITE)
v3:
- Rename add_fences and it's parameters
- Remove signaled check
- Remove waiting old_plane_state fences
v2:
- Add fences from old fb into new_plane_state->uapi.fence rather than
into old_plane_state->uapi.fence
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231031084557.1181630-1-jouni.hogander@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"To help make the move of sysctls out of kernel/sysctl.c not incur a
size penalty sysctl has been changed to allow us to not require the
sentinel, the final empty element on the sysctl array. Joel Granados
has been doing all this work. On the v6.6 kernel we got the major
infrastructure changes required to support this. For v6.7-rc1 we have
all arch/ and drivers/ modified to remove the sentinel. Both arch and
driver changes have been on linux-next for a bit less than a month. It
is worth re-iterating the value:
- this helps reduce the overall build time size of the kernel and run
time memory consumed by the kernel by about ~64 bytes per array
- the extra 64-byte penalty is no longer inncurred now when we move
sysctls out from kernel/sysctl.c to their own files
For v6.8-rc1 expect removal of all the sentinels and also then the
unneeded check for procname == NULL.
The last two patches are fixes recently merged by Krister Johansen
which allow us again to use softlockup_panic early on boot. This used
to work but the alias work broke it. This is useful for folks who want
to detect softlockups super early rather than wait and spend money on
cloud solutions with nothing but an eventual hung kernel. Although
this hadn't gone through linux-next it's also a stable fix, so we
might as well roll through the fixes now"
* tag 'sysctl-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (23 commits)
watchdog: move softlockup_panic back to early_param
proc: sysctl: prevent aliased sysctls from getting passed to init
intel drm: Remove now superfluous sentinel element from ctl_table array
Drivers: hv: Remove now superfluous sentinel element from ctl_table array
raid: Remove now superfluous sentinel element from ctl_table array
fw loader: Remove the now superfluous sentinel element from ctl_table array
sgi-xp: Remove the now superfluous sentinel element from ctl_table array
vrf: Remove the now superfluous sentinel element from ctl_table array
char-misc: Remove the now superfluous sentinel element from ctl_table array
infiniband: Remove the now superfluous sentinel element from ctl_table array
macintosh: Remove the now superfluous sentinel element from ctl_table array
parport: Remove the now superfluous sentinel element from ctl_table array
scsi: Remove now superfluous sentinel element from ctl_table array
tty: Remove now superfluous sentinel element from ctl_table array
xen: Remove now superfluous sentinel element from ctl_table array
hpet: Remove now superfluous sentinel element from ctl_table array
c-sky: Remove now superfluous sentinel element from ctl_talbe array
powerpc: Remove now superfluous sentinel element from ctl_table arrays
riscv: Remove now superfluous sentinel element from ctl_table array
x86/vdso: Remove now superfluous sentinel element from ctl_table array
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into drm-next
drm: renesas: shmobile: Atomic conversion + DT support
Currently, there are two drivers for the LCD controller on Renesas
SuperH-based and ARM-based SH-Mobile and R-Mobile SoCs:
1. sh_mobile_lcdcfb, using the fbdev framework,
2. shmob_drm, using the DRM framework.
However, only the former driver is used, as all platform support
integrates the former. None of these drivers support DT-based systems.
Convert the SH-Mobile DRM driver to atomic modesetting, and add DT
support, complemented by the customary set of fixes and improvements.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/cover.1694767208.git.geert+renesas@glider.be/
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patchwork.freedesktop.org/patch/msgid/CAMuHMdUF61V5qNyKbrTGxZfEJvCVuLO7q2R5MqZYkzRC_cNr0w@mail.gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull ia64 removal and asm-generic updates from Arnd Bergmann:
- The ia64 architecture gets its well-earned retirement as planned,
now that there is one last (mostly) working release that will be
maintained as an LTS kernel.
- The architecture specific system call tables are updated for the
added map_shadow_stack() syscall and to remove references to the
long-gone sys_lookup_dcookie() syscall.
* tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
hexagon: Remove unusable symbols from the ptrace.h uapi
asm-generic: Fix spelling of architecture
arch: Reserve map_shadow_stack() syscall number for all architectures
syscalls: Cleanup references to sys_lookup_dcookie()
Documentation: Drop or replace remaining mentions of IA64
lib/raid6: Drop IA64 support
Documentation: Drop IA64 from feature descriptions
kernel: Drop IA64 support from sig_fault handlers
arch: Remove Itanium (IA-64) architecture
|
|
Pull VFIO updates from Alex Williamson:
- Add support for "chunk mode" in the mlx5-vfio-pci variant driver,
which allows both larger device image sizes for migration, beyond the
previous 4GB limit, and also read-ahead support for improved
migration performance (Yishai Hadas)
- A new bus master control interface for the CDX bus driver where there
is no in-band mechanism to toggle device DMA as there is through
config space on PCI devices (Nipun Gupta)
- Add explicit alignment directives to vfio data structures to reduce
the chance of breaking 32-bit userspace. In most cases this is
transparent and the remaining cases where data structures are padded
work within the existing rules for extending data structures within
vfio (Stefan Hajnoczi)
- Resolve a bug in the cdx bus driver noted when compiled with clang
where missing parenthesis result in the wrong operation (Nathan
Chancellor)
- Resolve errors reported by smatch for a function when dealing with
invalid inputs (Alex Williamson)
- Add migration support to the mtty vfio/mdev sample driver for testing
and integration purposes, allowing CI of migration without specific
hardware requirements. Also resolve many of the short- comings of
this driver relative to implementation of the vfio interrupt ioctl
along the way (Alex Williamson)
* tag 'vfio-v6.7-rc1' of https://github.com/awilliam/linux-vfio:
vfio/mtty: Enable migration support
vfio/mtty: Overhaul mtty interrupt handling
vfio: Fix smatch errors in vfio_combine_iova_ranges()
vfio/cdx: Add parentheses between bitwise AND expression and logical NOT
vfio/mlx5: Activate the chunk mode functionality
vfio/mlx5: Add support for READING in chunk mode
vfio/mlx5: Add support for SAVING in chunk mode
vfio/mlx5: Pre-allocate chunks for the STOP_COPY phase
vfio/mlx5: Rename some stuff to match chunk mode
vfio/mlx5: Enable querying state size which is > 4GB
vfio/mlx5: Refactor the SAVE callback to activate a work only upon an error
vfio/mlx5: Wake up the reader post of disabling the SAVING migration file
vfio: use __aligned_u64 in struct vfio_device_ioeventfd
vfio: use __aligned_u64 in struct vfio_device_gfx_plane_info
vfio: trivially use __aligned_u64 for ioctl structs
vfio-cdx: add bus mastering device feature support
vfio: add bus master feature to device feature ioctl
cdx: add support for bus mastering
|
|
This workaround is primarily implemented by the BIOS. However if the
BIOS applies the workaround it will reserve a small piece of our DSM
(which should be at the top, right below the WOPCM); we just need to
keep that region reserved so that nothing else attempts to re-use it.
v2: Declare regs in intel_gt_regs.h (Matt Roper)
v3: Shift WA implementation before calculation of *base (Matt Roper)
v4:
- Change condition gscpmi base to be fall in DSM range.(Matt Roper)
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027195052.3676632-1-dnyaneshwar.bhadane@intel.com
|
|
Add a helper whereby a driver can invoke TDR immediately.
v2:
- Drop timeout args, rename function, use mod delayed work (Luben)
v3:
- s/XE/Xe (Luben)
- present tense in commit message (Luben)
- Adjust comment for drm_sched_tdr_queue_imm (Luben)
v4:
- Adjust commit message (Luben)
Cc: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://lore.kernel.org/r/20231031032439.1558703-6-matthew.brost@intel.com
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
|
|
Also add a lockdep assert to drm_sched_start_timeout.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://lore.kernel.org/r/20231031032439.1558703-5-matthew.brost@intel.com
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
|
|
Rather than call free_job and run_job in same work item have a dedicated
work item for each. This aligns with the design and intended use of work
queues.
v2:
- Test for DMA_FENCE_FLAG_TIMESTAMP_BIT before setting
timestamp in free_job() work item (Danilo)
v3:
- Drop forward dec of drm_sched_select_entity (Boris)
- Return in drm_sched_run_job_work if entity NULL (Boris)
v4:
- Replace dequeue with peek and invert logic (Luben)
- Wrap to 100 lines (Luben)
- Update comments for *_queue / *_queue_if_ready functions (Luben)
v5:
- Drop peek argument, blindly reinit idle (Luben)
- s/drm_sched_free_job_queue_if_ready/drm_sched_free_job_queue_if_done (Luben)
- Update work_run_job & work_free_job kernel doc (Luben)
v6:
- Do not move drm_sched_select_entity in file (Luben)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20231031032439.1558703-4-matthew.brost@intel.com
Reviewed-by: Luben Tuikov <ltuikov89@gmail.com>
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
|
|
In Xe, the new Intel GPU driver, a choice has made to have a 1 to 1
mapping between a drm_gpu_scheduler and drm_sched_entity. At first this
seems a bit odd but let us explain the reasoning below.
1. In Xe the submission order from multiple drm_sched_entity is not
guaranteed to be the same completion even if targeting the same hardware
engine. This is because in Xe we have a firmware scheduler, the GuC,
which allowed to reorder, timeslice, and preempt submissions. If a using
shared drm_gpu_scheduler across multiple drm_sched_entity, the TDR falls
apart as the TDR expects submission order == completion order. Using a
dedicated drm_gpu_scheduler per drm_sched_entity solve this problem.
2. In Xe submissions are done via programming a ring buffer (circular
buffer), a drm_gpu_scheduler provides a limit on number of jobs, if the
limit of number jobs is set to RING_SIZE / MAX_SIZE_PER_JOB we get flow
control on the ring for free.
A problem with this design is currently a drm_gpu_scheduler uses a
kthread for submission / job cleanup. This doesn't scale if a large
number of drm_gpu_scheduler are used. To work around the scaling issue,
use a worker rather than kthread for submission / job cleanup.
v2:
- (Rob Clark) Fix msm build
- Pass in run work queue
v3:
- (Boris) don't have loop in worker
v4:
- (Tvrtko) break out submit ready, stop, start helpers into own patch
v5:
- (Boris) default to ordered work queue
v6:
- (Luben / checkpatch) fix alignment in msm_ringbuffer.c
- (Luben) s/drm_sched_submit_queue/drm_sched_wqueue_enqueue
- (Luben) Update comment for drm_sched_wqueue_enqueue
- (Luben) Positive check for submit_wq in drm_sched_init
- (Luben) s/alloc_submit_wq/own_submit_wq
v7:
- (Luben) s/drm_sched_wqueue_enqueue/drm_sched_run_job_queue
v8:
- (Luben) Adjust var names / comments
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://lore.kernel.org/r/20231031032439.1558703-3-matthew.brost@intel.com
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
|
|
Add scheduler wqueue ready, stop, and start helpers to hide the
implementation details of the scheduler from the drivers.
v2:
- s/sched_wqueue/sched_wqueue (Luben)
- Remove the extra white line after the return-statement (Luben)
- update drm_sched_wqueue_ready comment (Luben)
Cc: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://lore.kernel.org/r/20231031032439.1558703-2-matthew.brost@intel.com
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- AMD adds some more upcoming HW platforms
- Intel made Meteorlake stable and started adding Lunarlake
- nouveau has a bunch of display rework in prepartion for the NVIDIA
GSP firmware support
- msm adds a7xx support
- habanalabs has finished migration to accel subsystem
Detail summary:
kernel:
- add initial vmemdup-user-array
core:
- fix platform remove() to return void
- drm_file owner updated to reflect owner
- move size calcs to drm buddy allocator
- let GPUVM build as a module
- allow variable number of run-queues in scheduler
edid:
- handle bad h/v sync_end in EDIDs
panfrost:
- add Boris as maintainer
fbdev:
- use fb_ops helpers more
- only allow logo use from fbcon
- rename fb_pgproto to pgprot_framebuffer
- add HPD state to drm_connector_oob_hotplug_event
- convert to fbdev i/o mem helpers
i915:
- Enable meteorlake by default
- Early Xe2 LPD/Lunarlake display enablement
- Rework subplatforms into IP version checks
- GuC based TLB invalidation for Meteorlake
- Display rework for future Xe driver integration
- LNL FBC features
- LNL display feature capability reads
- update recommended fw versions for DG2+
- drop fastboot module parameter
- added deviceid for Arrowlake-S
- drop preproduction workarounds
- don't disable preemption for resets
- cleanup inlines in headers
- PXP firmware loading fix
- Fix sg list lengths
- DSC PPS state readout/verification
- Add more RPL P/U PCI IDs
- Add new DG2-G12 stepping
- DP enhanced framing support to state checker
- Improve shared link bandwidth management
- stop using GEM macros in display code
- refactor related code into display code
- locally enable W=1 warnings
- remove PSR watchdog timers on LNL
amdgpu:
- RAS/FRU EEPROM updatse
- IP discovery updatses
- GC 11.5 support
- DCN 3.5 support
- VPE 6.1 support
- NBIO 7.11 support
- DML2 support
- lots of IP updates
- use flexible arrays for bo list handling
- W=1 fixes
- Enable seamless boot in more cases
- Enable context type property for HDMI
- Rework GPUVM TLB flushing
- VCN IB start/size alignment fixes
amdkfd:
- GC 10/11 fixes
- GC 11.5 support
- use partial migration in GPU faults
radeon:
- W=1 Fixes
- fix some possible buffer overflow/NULL derefs
nouveau:
- update uapi for NO_PREFETCH
- scheduler/fence fixes
- rework suspend/resume for GSP-RM
- rework display in preparation for GSP-RM
habanalabs:
- uapi: expose tsc clock
- uapi: block access to eventfd through control device
- uapi: force dma-buf export to PAGE_SIZE alignments
- complete move to accel subsystem
- move firmware interface include files
- perform hard reset on PCIe AXI drain event
- optimise user interrupt handling
msm:
- DP: use existing helpers for DPCD
- DPU: interrupts reworked
- gpu: a7xx (a730/a740) support
- decouple msm_drv from kms for headless devices
mediatek:
- MT8188 dsi/dp/edp support
- DDP GAMMA - 12 bit LUT support
- connector dynamic selection capability
rockchip:
- rv1126 mipi-dsi/vop support
- add planar formats
ast:
- rename constants
panels:
- Mitsubishi AA084XE01
- JDI LPM102A188A
- LTK050H3148W-CTA6
ivpu:
- power management fixes
qaic:
- add detach slice bo api
komeda:
- add NV12 writeback
tegra:
- support NVSYNC/NHSYNC
- host1x suspend fixes
ili9882t:
- separate into own driver"
* tag 'drm-next-2023-10-31-1' of git://anongit.freedesktop.org/drm/drm: (1803 commits)
drm/amdgpu: Remove unused variables from amdgpu_show_fdinfo
drm/amdgpu: Remove duplicate fdinfo fields
drm/amd/amdgpu: avoid to disable gfxhub interrupt when driver is unloaded
drm/amdgpu: Add EXT_COHERENT support for APU and NUMA systems
drm/amdgpu: Retrieve CE count from ce_count_lo_chip in EccInfo table
drm/amdgpu: Identify data parity error corrected in replay mode
drm/amdgpu: Fix typo in IP discovery parsing
drm/amd/display: fix S/G display enablement
drm/amdxcp: fix amdxcp unloads incompletely
drm/amd/amdgpu: fix the GPU power print error in pm info
drm/amdgpu: Use pcie domain of xcc acpi objects
drm/amd: check num of link levels when update pcie param
drm/amdgpu: Add a read to GFX v9.4.3 ring test
drm/amd/pm: call smu_cmn_get_smc_version in is_mode1_reset_supported.
drm/amdgpu: get RAS poison status from DF v4_6_2
drm/amdgpu: Use discovery table's subrevision
drm/amd/display: 3.2.256
drm/amd/display: add interface to query SubVP status
drm/amd/display: Read before writing Backlight Mode Set Register
drm/amd/display: Disable SYMCLK32_SE RCO on DCN314
...
|
|
Since we're asked to disable FECSTALL_DIS_DPTSTREAM_DPTTG when
the transcoder is disabled it seems prudent to also clear it
when enabliing the transcoder w/o FEC, just in case
someone else left it enabled by mistake.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018154123.5479-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Follow the bspec sequence more closely and clear ACT sent just
before triggering the allocation. Can't see why we'd want to
deviate from the spec sequence here.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018154123.5479-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Bspec tells us that we should disable the transcoder before
deleting the payload. Looks like this has been reversed since
MST support was added.
I suppose this shouldn't matter in practice since the downstream
device shouldn't really do anything with the new payload until
we send the ACT. But I see no compelling reason to deviate from
the bspec sequence regardless.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018154123.5479-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
The DP modeset sequence asks us to disable TRANSCONF before clearing
the FECSTALL_DIS_DPTSTREAM_DPTTG bit, although we are still asked
to wait for the transcoder to stop only after both steps have
been done.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018154123.5479-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
When a fence signals there is a very small race window where the timestamp
isn't updated yet. sync_file solves this by busy waiting for the
timestamp to appear, but on other ocassions didn't handled this
correctly.
Provide a dma_fence_timestamp() helper function for this and use it in
all appropriate cases.
Another alternative would be to grab the spinlock when that happens.
v2 by teddy: add a wait parameter to wait for the timestamp to show up, in case
the accurate timestamp is needed and/or the timestamp is not based on
ktime (e.g. hw timestamp)
v3 chk: drop the parameter again for unified handling
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: 1774baa64f93 ("drm/scheduler: Change scheduled fence track v2")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
CC: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20230929104725.2358-1-christian.koenig@amd.com
|
|
remove unused macro HW_REV
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
MACO only works if BACO is supported
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
|
|
If the size returned by drm buddy allocator is higher than
the required size, we take the higher size to calculate
the buffer start address. This is required if we couldn't
trim the buffer to the requested size. This will fix the
display corruption issue on APU's which has limited VRAM
size.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2859
Fixes: 0a1844bf0b53 ("drm/buddy: Improve contiguous memory allocation")
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The version can't be queried from discovery table.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
If driver does not set unmap latency for KIQ, the default value of KIQ
unmap latency is zero. When do unmap queue, KIQ will return that almost
immediately after receiving unmap command. So, the queue status will be
saved to MQD incorrectly or lost in some chance.
[how]
Set unmap latency when do kiq set resources. The unmap latency is set to
be 1 second that is synchronized with Windows driver.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tong Liu01 <Tong.Liu01@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
fix the high voltage and temperature issue after the driver is unloaded on smu 13.0.0,
smu 13.0.7 and smu 13.0.10
v2 - fix the code format and make sure it is used on the unload case only.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
gpu tlb flush is skipped if reset sem is held, it makes
mes_self_test fail since it involves add_hw_queue/remove_hw_queue
which needs tlb flush functional. Remove mes_self_test in gpu
recover sequence.
This patch is to fix the recover failure in gfx11.
[ 1831.768292] [drm] ring sdma_32769.3.3 was added
[ 1831.768313] [drm] ring gfx_32769.1.1 ib test pass
[ 1831.768337] [drm] ring compute_32769.2.2 ib test pass
[ 1831.768399] amdgpu 0000:c2:00.0: amdgpu: [gfxhub] page fault (src_id:0 ring:24 vmid:8 pasid:32769, for process pid 0 thread pid 0)
[ 1831.768434] amdgpu 0000:c2:00.0: amdgpu: in page starting at address 0x0000aec200000000 from client 10
[ 1831.768456] amdgpu 0000:c2:00.0: amdgpu: GCVM_L2_PROTECTION_FAULT_STATUS:0x00800A30
[ 1831.768473] amdgpu 0000:c2:00.0: amdgpu: Faulty UTCL2 client ID: CPC (0x5)
[ 1831.768489] amdgpu 0000:c2:00.0: amdgpu: MORE_FAULTS: 0x0
[ 1831.768501] amdgpu 0000:c2:00.0: amdgpu: WALKER_ERROR: 0x0
[ 1831.768513] amdgpu 0000:c2:00.0: amdgpu: PERMISSION_FAULTS: 0x3
[ 1831.768521] amdgpu 0000:c2:00.0: amdgpu: MAPPING_ERROR: 0x0
[ 1831.768529] amdgpu 0000:c2:00.0: amdgpu: RW: 0x0
[ 1831.931229] amdgpu 0000:c2:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring sdma_32769.3.3 test failed (-110)
[ 1832.062917] [drm:mes_v11_0_submit_pkt_and_poll_completion.constprop.0 [amdgpu]] *ERROR* MES failed to response msg=3
[ 1832.063107] [drm:amdgpu_mes_remove_hw_queue [amdgpu]] *ERROR* failed to remove hardware queue, queue id = 3
Fixes: e2e3788850b9 ("drm/amdgpu: rework lock handling for flush_tlb v2")
Reported-by: Li Ma <li.ma@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Drop checking deferred error which can be handled by poison
consumption.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fixes warnings:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/smu_v13_0_6_ppt.c:286:45:
warning: '%s' directive output may be truncated writing up to 29 bytes
into a region of size 23 [-Wformat-truncation=]
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/smu_v13_0_6_ppt.c:286:52:
warning: '%s' directive output may be truncated writing up to 29 bytes
into a region of size 23 [-Wformat-truncation=]
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu14/smu_v14_0.c:72:45: warning:
'%s' directive output may be truncated writing up to 29 bytes into a
region of size 23 [-Wformat-truncation=]
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu14/smu_v14_0.c:72:52: warning:
'%s' directive output may be truncated writing up to 29 bytes into a
region of size 23 [-Wformat-truncation=]
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Not all platforms support RAS.
Fixes: 73582be11ac8 ("drm/amdgpu: bypass RAS error reset in some conditions")
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 250aa22920cd5d956a5d3e9c6a43d671c2bae217.
The DMA-fence annotations cause a lockdep warning (see below). As per
https://patchwork.freedesktop.org/patch/462170/ it sounds like the
annotations don't work correctly.
======================================================
WARNING: possible circular locking dependency detected
6.5.0-rc2+ #2 Not tainted
------------------------------------------------------
kmstest/219 is trying to acquire lock:
c4705838 (&hdmi->lock){+.+.}-{3:3}, at: hdmi5_bridge_mode_set+0x1c/0x50
but task is already holding lock:
c11e1128 (dma_fence_map){++++}-{0:0}, at: omap_atomic_commit_tail+0x14/0xbc
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (dma_fence_map){++++}-{0:0}:
__dma_fence_might_wait+0x48/0xb4
dma_resv_lockdep+0x1b8/0x2bc
do_one_initcall+0x68/0x3b0
kernel_init_freeable+0x260/0x34c
kernel_init+0x14/0x140
ret_from_fork+0x14/0x28
-> #1 (fs_reclaim){+.+.}-{0:0}:
fs_reclaim_acquire+0x70/0xa8
__kmem_cache_alloc_node+0x3c/0x368
kmalloc_trace+0x28/0x58
_drm_do_get_edid+0x7c/0x35c
hdmi5_bridge_get_edid+0xc8/0x1ac
drm_bridge_connector_get_modes+0x64/0xc0
drm_helper_probe_single_connector_modes+0x170/0x528
drm_client_modeset_probe+0x208/0x1334
__drm_fb_helper_initial_config_and_unlock+0x30/0x548
omap_fbdev_client_hotplug+0x3c/0x6c
drm_client_register+0x58/0x94
pdev_probe+0x544/0x6b0
platform_probe+0x58/0xbc
really_probe+0xd8/0x3fc
__driver_probe_device+0x94/0x1f4
driver_probe_device+0x2c/0xc4
__device_attach_driver+0xa4/0x11c
bus_for_each_drv+0x84/0xdc
__device_attach+0xac/0x20c
bus_probe_device+0x8c/0x90
device_add+0x588/0x7e0
platform_device_add+0x110/0x24c
platform_device_register_full+0x108/0x15c
dss_bind+0x90/0xc0
try_to_bring_up_aggregate_device+0x1e0/0x2c8
__component_add+0xa4/0x174
hdmi5_probe+0x1c8/0x270
platform_probe+0x58/0xbc
really_probe+0xd8/0x3fc
__driver_probe_device+0x94/0x1f4
driver_probe_device+0x2c/0xc4
__device_attach_driver+0xa4/0x11c
bus_for_each_drv+0x84/0xdc
__device_attach+0xac/0x20c
bus_probe_device+0x8c/0x90
deferred_probe_work_func+0x8c/0xd8
process_one_work+0x2ac/0x6e4
worker_thread+0x30/0x4ec
kthread+0x100/0x124
ret_from_fork+0x14/0x28
-> #0 (&hdmi->lock){+.+.}-{3:3}:
__lock_acquire+0x145c/0x29cc
lock_acquire.part.0+0xb4/0x258
__mutex_lock+0x90/0x950
mutex_lock_nested+0x1c/0x24
hdmi5_bridge_mode_set+0x1c/0x50
drm_bridge_chain_mode_set+0x48/0x5c
crtc_set_mode+0x188/0x1d0
omap_atomic_commit_tail+0x2c/0xbc
commit_tail+0x9c/0x188
drm_atomic_helper_commit+0x158/0x18c
drm_atomic_commit+0xa4/0xe8
drm_mode_atomic_ioctl+0x9a4/0xc38
drm_ioctl+0x210/0x4a8
sys_ioctl+0x138/0xf00
ret_fast_syscall+0x0/0x1c
other info that might help us debug this:
Chain exists of:
&hdmi->lock --> fs_reclaim --> dma_fence_map
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
rlock(dma_fence_map);
lock(fs_reclaim);
lock(dma_fence_map);
lock(&hdmi->lock);
*** DEADLOCK ***
3 locks held by kmstest/219:
#0: f1011de4 (crtc_ww_class_acquire){+.+.}-{0:0}, at: drm_mode_atomic_ioctl+0xf0/0xc38
#1: c47059c8 (crtc_ww_class_mutex){+.+.}-{3:3}, at: modeset_lock+0xf8/0x230
#2: c11e1128 (dma_fence_map){++++}-{0:0}, at: omap_atomic_commit_tail+0x14/0xbc
stack backtrace:
CPU: 1 PID: 219 Comm: kmstest Not tainted 6.5.0-rc2+ #2
Hardware name: Generic DRA74X (Flattened Device Tree)
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x58/0x70
dump_stack_lvl from check_noncircular+0x164/0x198
check_noncircular from __lock_acquire+0x145c/0x29cc
__lock_acquire from lock_acquire.part.0+0xb4/0x258
lock_acquire.part.0 from __mutex_lock+0x90/0x950
__mutex_lock from mutex_lock_nested+0x1c/0x24
mutex_lock_nested from hdmi5_bridge_mode_set+0x1c/0x50
hdmi5_bridge_mode_set from drm_bridge_chain_mode_set+0x48/0x5c
drm_bridge_chain_mode_set from crtc_set_mode+0x188/0x1d0
crtc_set_mode from omap_atomic_commit_tail+0x2c/0xbc
omap_atomic_commit_tail from commit_tail+0x9c/0x188
commit_tail from drm_atomic_helper_commit+0x158/0x18c
drm_atomic_helper_commit from drm_atomic_commit+0xa4/0xe8
drm_atomic_commit from drm_mode_atomic_ioctl+0x9a4/0xc38
drm_mode_atomic_ioctl from drm_ioctl+0x210/0x4a8
drm_ioctl from sys_ioctl+0x138/0xf00
sys_ioctl from ret_fast_syscall+0x0/0x1c
Exception stack(0xf1011fa8 to 0xf1011ff0)
1fa0: 00466d58 be9ab510 00000003 c03864bc be9ab510 be9ab4e0
1fc0: 00466d58 be9ab510 c03864bc 00000036 00466ef0 00466fc0 00467020 00466f20
1fe0: b6bc7ef4 be9ab4d0 b6bbbb00 b6cb2cc0
Fixes: 250aa22920cd ("drm/omapdrm: Annotate dma-fence critical section in commit path")
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230920-dma-fence-annotation-revert-v1-2-7ebf6f7f5bf6@ideasonboard.com
|
|
This reverts commit 4d56a4f08391857ba93465de489707b66adad114.
The DMA-fence annotations cause a lockdep warning (see below). As per
https://patchwork.freedesktop.org/patch/462170/ it sounds like the
annotations don't work correctly.
======================================================
WARNING: possible circular locking dependency detected
6.6.0-rc2+ #1 Not tainted
------------------------------------------------------
kmstest/733 is trying to acquire lock:
ffff8000819377f0 (fs_reclaim){+.+.}-{0:0}, at: __kmem_cache_alloc_node+0x58/0x2d4
but task is already holding lock:
ffff800081a06aa0 (dma_fence_map){++++}-{0:0}, at: tidss_atomic_commit_tail+0x20/0xc0 [tidss]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (dma_fence_map){++++}-{0:0}:
__dma_fence_might_wait+0x5c/0xd0
dma_resv_lockdep+0x1a4/0x32c
do_one_initcall+0x84/0x2fc
kernel_init_freeable+0x28c/0x4c4
kernel_init+0x24/0x1dc
ret_from_fork+0x10/0x20
-> #1 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}:
fs_reclaim_acquire+0x70/0xe4
__kmem_cache_alloc_node+0x58/0x2d4
kmalloc_trace+0x38/0x78
__kthread_create_worker+0x3c/0x150
kthread_create_worker+0x64/0x8c
workqueue_init+0x1e8/0x2f0
kernel_init_freeable+0x11c/0x4c4
kernel_init+0x24/0x1dc
ret_from_fork+0x10/0x20
-> #0 (fs_reclaim){+.+.}-{0:0}:
__lock_acquire+0x1370/0x20d8
lock_acquire+0x1e8/0x308
fs_reclaim_acquire+0xd0/0xe4
__kmem_cache_alloc_node+0x58/0x2d4
__kmalloc_node_track_caller+0x58/0xf0
kmemdup+0x34/0x60
regmap_bulk_write+0x64/0x2c0
tc358768_bridge_pre_enable+0x8c/0x12d0 [tc358768]
drm_atomic_bridge_call_pre_enable+0x68/0x80 [drm]
drm_atomic_bridge_chain_pre_enable+0x50/0x158 [drm]
drm_atomic_helper_commit_modeset_enables+0x164/0x264 [drm_kms_helper]
tidss_atomic_commit_tail+0x58/0xc0 [tidss]
commit_tail+0xa0/0x188 [drm_kms_helper]
drm_atomic_helper_commit+0x1a8/0x1c0 [drm_kms_helper]
drm_atomic_commit+0xa8/0xe0 [drm]
drm_mode_atomic_ioctl+0x9ec/0xc80 [drm]
drm_ioctl_kernel+0xc4/0x170 [drm]
drm_ioctl+0x234/0x4b0 [drm]
drm_compat_ioctl+0x110/0x12c [drm]
__arm64_compat_sys_ioctl+0x128/0x150
invoke_syscall+0x48/0x110
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc_compat+0x1c/0x38
el0_svc_compat+0x48/0xb4
el0t_32_sync_handler+0xb0/0x138
el0t_32_sync+0x194/0x198
other info that might help us debug this:
Chain exists of:
fs_reclaim --> mmu_notifier_invalidate_range_start --> dma_fence_map
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
rlock(dma_fence_map);
lock(mmu_notifier_invalidate_range_start);
lock(dma_fence_map);
lock(fs_reclaim);
*** DEADLOCK ***
3 locks held by kmstest/733:
#0: ffff800082e5bba0 (crtc_ww_class_acquire){+.+.}-{0:0}, at: drm_mode_atomic_ioctl+0x118/0xc80 [drm]
#1: ffff000004224c88 (crtc_ww_class_mutex){+.+.}-{3:3}, at: modeset_lock+0xdc/0x1a0 [drm]
#2: ffff800081a06aa0 (dma_fence_map){++++}-{0:0}, at: tidss_atomic_commit_tail+0x20/0xc0 [tidss]
stack backtrace:
CPU: 0 PID: 733 Comm: kmstest Not tainted 6.6.0-rc2+ #1
Hardware name: Toradex Verdin AM62 on Verdin Development Board (DT)
Call trace:
dump_backtrace+0x98/0x118
show_stack+0x18/0x24
dump_stack_lvl+0x60/0xac
dump_stack+0x18/0x24
print_circular_bug+0x288/0x368
check_noncircular+0x168/0x17c
__lock_acquire+0x1370/0x20d8
lock_acquire+0x1e8/0x308
fs_reclaim_acquire+0xd0/0xe4
__kmem_cache_alloc_node+0x58/0x2d4
__kmalloc_node_track_caller+0x58/0xf0
kmemdup+0x34/0x60
regmap_bulk_write+0x64/0x2c0
tc358768_bridge_pre_enable+0x8c/0x12d0 [tc358768]
drm_atomic_bridge_call_pre_enable+0x68/0x80 [drm]
drm_atomic_bridge_chain_pre_enable+0x50/0x158 [drm]
drm_atomic_helper_commit_modeset_enables+0x164/0x264 [drm_kms_helper]
tidss_atomic_commit_tail+0x58/0xc0 [tidss]
commit_tail+0xa0/0x188 [drm_kms_helper]
drm_atomic_helper_commit+0x1a8/0x1c0 [drm_kms_helper]
drm_atomic_commit+0xa8/0xe0 [drm]
drm_mode_atomic_ioctl+0x9ec/0xc80 [drm]
drm_ioctl_kernel+0xc4/0x170 [drm]
drm_ioctl+0x234/0x4b0 [drm]
drm_compat_ioctl+0x110/0x12c [drm]
__arm64_compat_sys_ioctl+0x128/0x150
invoke_syscall+0x48/0x110
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc_compat+0x1c/0x38
el0_svc_compat+0x48/0xb4
el0t_32_sync_handler+0xb0/0x138
el0t_32_sync+0x194/0x198
Fixes: 4d56a4f08391 ("drm/tidss: Annotate dma-fence critical section in commit path")
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230920-dma-fence-annotation-revert-v1-1-7ebf6f7f5bf6@ideasonboard.com
|
|
Set copy engine arbitration into round robin mode
for part of Wa_16018031267 / Wa_16018063123 mitigation.
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231026-wabb-v6-4-4aa7d55d0a8a@intel.com
|
|
Test re-uses logic form indirect ctx BB selftest.
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231026-wabb-v6-3-4aa7d55d0a8a@intel.com
|
|
Apply WABB blit for Wa_16018031267 / Wa_16018063123.
v3: drop unused enum definition
v4: move selftest to separate patch, use wa only on BCS0.
v5: fixed selftest caller to context_wabb
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231026-wabb-v6-2-4aa7d55d0a8a@intel.com
|
|
Reserve one page in each vm for kernel space to use for things
such as workarounds.
v2: use real memory, do not decrease vm.total
v4: reserve only one page and explain flag
v5: remove allocated object on ppgtt cleanup
v6: decrease vm->total by reservation size
Suggested-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231026-wabb-v6-1-4aa7d55d0a8a@intel.com
|
|
Handle platforms with multiple GTs by iterate over all GTs.
Add a Fixes commit so this gets propagated for MTL support.
Fixes: 213c43676beb ("drm/i915/mtl: Remove the 'force_probe' requirement for Meteor Lake")
Suggested-by: John Harrison <john.c.harrison@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231025102826.16955-1-nirmoy.das@intel.com
|
|
When we dock a monitor we end up with a enable and disable connector
cycle but if hdcp content is running we get the userspace in
enabled state and driver maintaining a undesired state which causes
the content to stop playing and we only enable hdcp if the userspace
state in desired. This patch fixes that.
--v2
-Move code to intel_hdcp [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231026121139.987437-4-suraj.kandpal@intel.com
|
|
Let's convert intel_hdcp_enable to a blanket function
which just has some conditions which needs to be checked
before connectors enable hdcp.
This cleans up code and avoids code duplication.
--v3
-Keep function name as intel_hdcp_enable() [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231026121139.987437-3-suraj.kandpal@intel.com
|
|
Rename hdcp 1.4 enablement function from _intel_hdcp_enable to
intel_hdcp1_enable to better represent what version of hdcp is
being enabled
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231026121139.987437-2-suraj.kandpal@intel.com
|
|
We are asked to reprogram PEG_BAND_GAP_DATA prior to enabling
hotplug detection on the g45 HDMI/DP ports. Currently we do said
reprogamming from the DP/HDMI connector initialization functions.
That code should be mostly platform agnostic so clearly not the
best place for this. Move the workaround to the place where we
actually enable HPD detection.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231012124033.26983-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
We have a bit of duplicated code around the DPLL disabling. Extract
that to a new function, and for symmetry also do the same for the
enable direction.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231012123522.26045-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
The extra DPLL power domain is currently handled in three places:
- combo_pll_enable()
- combo_pll_disable()
- readout_dpll_hw_state()
First two of those are low level PLL funcs, but the third is a higher
level thing. So the current situation is rather inconsistent. Unify
this by moving the PLL enable/disable up one level. This also means
the extra power domain could be trivially be used by other platforms
as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231012123522.26045-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Just include the JSL/EHL DPLL4 extra power domain in the dpll_info
struct. This way the same approach could be used by other platforms
as well (should the need arise), and we don't have to sprinkle
platform checks all over the place.
Note that I'm perhaps slightly abusing things here as
power_domain==0 (which is actually POWER_DOMAIN_DISPLAY_CORE) now
indicates that no extra power domain is needed. I suppose using
POWER_DOMAIN_INVALID would be more correct, but then we'd have to
sprinkle that to all the other DPLLs.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231012123522.26045-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Use named initializers when populating the DPLL info. This
is just more convenient and less error prone as we no longer
have to keep the initializers in a specific order.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231012123522.26045-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
