summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2023-12-01drm/tidss: Use PM autosuspendTomi Valkeinen
Use runtime PM autosuspend feature, with 1s timeout, to avoid unnecessary suspend-resume cycles when, e.g. the userspace temporarily turns off the crtcs when configuring the outputs. Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com> Link: https://lore.kernel.org/r/20231109-tidss-probe-v2-2-ac91b5ea35c0@ideasonboard.com Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
2023-12-01drm/tidss: Use pm_runtime_resume_and_get()Tomi Valkeinen
Use pm_runtime_resume_and_get() instead of pm_runtime_get_sync(), which will handle error situations better. Also fix the return, as there should be no reason for the current complex return. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com> Link: https://lore.kernel.org/r/20231109-tidss-probe-v2-1-ac91b5ea35c0@ideasonboard.com Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
2023-12-01drm/tidss: Add support for AM62A7 DSSAradhya Bhatia
Add support for the DSS controller on TI's AM62A7 SoC in the tidss driver. This controller has 2 video pipelines that can render 2 video planes on over a screen, using the overlay managers. The output of the DSS comes from video port 2 (VP2) in the form of RGB88 DPI signals, while the VP1 is tied off inside the SoC. Also add and use a new type of VP, DISPC_VP_TIED_OFF, for the tied-off VP1 of AM62A DSS. Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://lore.kernel.org/r/20231108171619.978438-3-a-bhatia1@ti.com Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
2023-12-01drm/omapdrm: Improve check for contiguous buffersAndrew Davis
While a scatter-gather table having only 1 entry does imply it is contiguous, it is a logic error to assume the inverse. Tables can have more than 1 entry and still be contiguous. Use a proper check here. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231113205501.616927-1-afd@ti.com
2023-12-01drm/i915: add bool type checks in PIPE_CONF_CHECK_*Jani Nikula
Avoid bool/int mismatches in state checker macros. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231129173317.1192269-2-jani.nikula@intel.com
2023-12-01drm/i915: use PIPE_CONF_CHECK_BOOL() for bool membersJani Nikula
Don't treat bools as integers. v2: Rebase Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231129173317.1192269-1-jani.nikula@intel.com
2023-12-01drm/i915: Check pipe active state in {planes,vrr}_{enabling,disabling}()Ville Syrjälä
{planes,vrr}_{enabling,disabling}() are supposed to indicate whether the specific hardware feature is supposed to be enabling or disabling. That can only makes sense if the pipe is active overall. So check for that before we go poking at the hardware. I think we're semi-safe currently on due to: - intel_pre_plane_update() doesn't get called when the pipe was not-active prior to the commit, but this is actually a bug. This saves vrr_disabling(), and vrr_enabling() is called from deeper down where we have already checked hw.active. - active_planes mirrors the crtc's hw.active Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-2-ville.syrjala@linux.intel.com (cherry picked from commit bc53c4d56eb24dbe56cd2c66ef4e9fc9393b1533) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-12-01Merge tag 'amd-drm-fixes-6.7-2023-11-30' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.7-2023-11-30: amdgpu: - DMUB fix - DCN 3.5 fixes - XGMI fix - DCN 3.2 fixes - Vangogh suspend fix - NBIO 7.9 fix - GFX11 golden register fix - Backlight fix - NBIO 7.11 fix - IB test overflow fix - DCN 3.1.4 fixes - fix a runtime pm ref count - Retimer fix - ABM fix - DCN 3.1.5 fix - Fix AGP addressing - Fix possible memory leak in SMU error path - Make sure PME is enabled in D3 - Fix possible NULL pointer dereference in debugfs - EEPROM fix - GC 9.4.3 fix amdkfd: - IP version check fix - Fix memory leak in pqm_uninit() drm: - Revert unexport of prime helpers for fd/handle conversion Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231130213135.5083-1-alexander.deucher@amd.com
2023-11-30drm/amd/display: Fix NULL pointer dereference at hibernateMario Limonciello
During hibernate sequence the source context might not have a clk_mgr. So don't use it to look for DML2 support. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2980 Fixes: 7966f319c66d ("drm/amd/display: Introduce DML2") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-30drm/radeon: check return value of radeon_ring_lock()Nikita Zhandarovich
In the unlikely event of radeon_ring_lock() failing, its errno return value should be processed. This patch checks said return value and prints a debug message in case of an error. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. Fixes: 48c0c902e2e6 ("drm/radeon/kms: add support for CP setup on SI") Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-30drm/radeon/r100: Fix integer overflow issues in r100_cs_track_check()Nikita Zhandarovich
It may be possible, albeit unlikely, to encounter integer overflow during the multiplication of several unsigned int variables, the result being assigned to a variable 'size' of wider type. Prevent this potential behaviour by converting one of the multiples to unsigned long. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. Fixes: 0242f74d29df ("drm/radeon: clean up CS functions in r100.c") Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-30drm/radeon/r600_cs: Fix possible int overflows in r600_cs_check_reg()Nikita Zhandarovich
While improbable, there may be a chance of hitting integer overflow when the result of radeon_get_ib_value() gets shifted left. Avoid it by casting one of the operands to larger data type (u64). Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. Fixes: 1729dd33d20b ("drm/radeon/kms: r600 CS parser fixes") Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-30drm/amdgpu: enable mca debug mode on APU by defaultYang Wang
enable MCA debug mode on APU device by default. Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-30drm/amdgpu: distinguish rlc fw for different SKULikun Gao
For some SKU, rlc firmware should use different one compared with the normal rlc firmware. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-30drm/amdgpu: Fix missing mca debugfs nodeYang Wang
Use amdgpu_ip_version() helper function to check ip version. The ip version contains other information, use the helper function to avoid reading wrong value. Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-30drm/amdgpu: Skip access gfx11 golden registers under SRIOVZhenGuo Yin
[Why] Golden registers are PF-only registers on gfx11. RLCG interface will return "out-of-range" under SRIOV VF. [How] Skip access gfx11 golden registers under SRIOV. Reviewed-by: Horace Chen <horace.chen@amd.com> Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-01Merge tag 'drm-misc-fixes-2023-11-29' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Fixes for v6.7-rc4: - Revert panel fixes as they require exporting device_is_dependent. - Do not double add fences in dma_resv_add_fence. - Fix GPUVM license identifier. - Assorted nouveau fixes. - Fix error check for nt36523. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/561f807e-f9d3-43c1-80d3-8b41ba83c9ec@linux.intel.com
2023-11-30drm/i915/guc: Add a selftest for FAST_REQUEST errorsJohn Harrison
There is a mechanism for reporting errors from fire and forget H2G messages. This is the only way to find out about almost any error in the GuC backend submission path. So it would be useful to know that it is working. v2: Fix some dumb over-complications and a couple of typos - review feedback from Daniele. Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231114010016.234570-3-John.C.Harrison@Intel.com
2023-11-30drm/i915/guc: Fix for potential false positives in GuC hang selftestJohn Harrison
Noticed that the hangcheck selftest is submitting a non-preemptoble spinner. That means that even if the GuC does not die, the heartbeat will still kick in and trigger a reset. Which is rather defeating the purpose of the test - to verify that the heartbeat will kick in if the GuC itself has died. The test is deliberately killing the GuC, so it should never hit the case of a non-dead GuC. But it is not impossible that the kill might fail at some future point due to other driver re-work. So, make the spinner pre-emptible. That way the heartbeat can get through if the GuC is alive and context switching. Thus a reset only happens if the GuC dies. Thus, if the kill should stop working the test will now fail rather than claim to pass. Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231114010016.234570-2-John.C.Harrison@Intel.com
2023-11-30Revert "drm/prime: Unexport helpers for fd/handle conversion"Felix Kuehling
This reverts commit 71a7974ac7019afeec105a54447ae1dc7216cbb3. These helper functions are needed for KFD to export and import DMABufs the right way without duplicating the tracking of DMABufs associated with GEM objects while ensuring that move notifier callbacks are working as intended. CC: Christian König <christian.koenig@amd.com> CC: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-30drm/panfrost: Fix incorrect updating of current device frequencyAdrián Larumbe
It was noticed when setting the Panfrost's DVFS device to the performant governor, GPU frequency as reported by fdinfo had dropped to 0 permamently. There are two separate issues causing this behaviour: - Not initialising the device's current_frequency variable to its original value during device probe(). - Updating said variable in Panfrost devfreq's get_dev_status() rather than after the new OPP's frequency had been retrieved in target(), which meant the old frequency would be assigned instead. Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com> Fixes: f11b0417eec2 ("drm/panfrost: Add fdinfo support GPU load metrics") Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231125205438.375407-3-adrian.larumbe@collabora.com
2023-11-30drm/panfrost: Consider dma-buf imported objects as residentAdrián Larumbe
A GEM object constructed from a dma-buf imported sgtable should be regarded as being memory resident, because the dma-buf API mandates backing storage to be allocated when attachment succeeds. Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com> Fixes: 9ccdac7aa822 ("drm/panfrost: Add fdinfo support for memory stats") Reported-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231125205438.375407-2-adrian.larumbe@collabora.com
2023-11-30drm/imagination: fix off by one in pvr_vm_mips_init() error handlingDan Carpenter
If the call to vmap() fails the "page_nr" is one element beyond the end of the mips_data->pt_dma_addr[] and mips_data->pt_pages[] arrays. The way that this is traditionally written is that we clean up the partial loop iteration before the goto and then we can say while (--i >= 0). At that point we know that all the elements thus far are initialized so we don't need to have NULL checks. Fixes: 927f3e0253c1 ("drm/imagination: Implement MIPS firmware processor and MMU support") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Frank Binns <frank.binns@imgtec.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/a2d3210b-290f-4397-9c3e-efdcca94d8ac@moroto.mountain
2023-11-30drm/imagination: Fix IS_ERR() vs NULL bug in pvr_request_firmware()Dan Carpenter
The pvr_build_firmware_filename() function returns NULL on error. It doesn't return error pointers. Fixes: f99f5f3ea7ef ("drm/imagination: Add GPU ID parsing and firmware loading") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/384288de-a779-46c7-869d-b3c63462e12b@moroto.mountain
2023-11-30drm/imagination: Fix error codes in pvr_device_clk_init()Dan Carpenter
There is a cut and paste error so this code returns the wrong variable. Fixes: 1f88f017e649 ("drm/imagination: Get GPU resources") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/1649c66b-3eea-40d2-9687-592124f968cf@moroto.mountain
2023-11-30nouveau/tu102: flush all pdbs on vmm flushDave Airlie
This is a hack around a bug exposed with the GSP code, I'm not sure what is happening exactly, but it appears some of our flushes don't result in proper tlb invalidation for out BAR2 and we get a BAR2 fault from GSP and it all dies. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231130010852.4034774-1-airlied@gmail.com
2023-11-29drm/i915: Skip pxp init if gt is wedgedZhanjun Dong
The gt wedged could be triggered by missing guc firmware file, HW not working, etc. Once triggered, it means all gt usage is dead, therefore we can't enable pxp under this fatal error condition. v2: Updated commit message. v3: Updated return code check. Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com> Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231113224953.378534-1-zhanjun.dong@intel.com
2023-11-30drm/nouveau: Removes unnecessary args check in nouveau_uvmm_sm_prepareYuran Pereira
Checking `args` after calling `op_map_prepare` is unnecessary since if `op_map_prepare` was to be called with NULL args, it would lead to a NULL pointer dereference, thus never hitting that check. Hence remove the check and add a note to remind users of this function to ensure that args != NULL when calling this function for a map operation as it was suggested by Danilo [1]. [1] https://lore.kernel.org/lkml/6a1ebcef-bade-45a0-9bd9-c05f0226eb88@redhat.com Suggested-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Yuran Pereira <yuran.pereira@hotmail.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/GV1PR10MB65637F4BAABFE2D8E261E1DCE8B0A@GV1PR10MB6563.EURPRD10.PROD.OUTLOOK.COM
2023-11-30nouveau/gsp: document some aspects of GSP-RMTimur Tabi
Document a few aspects of communication with GSP-RM. These comments are derived from notes made during early development of GSP-RM support in Nouveau, but were not included in the initial patch set. Reviewed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Timur Tabi <ttabi@nvidia.com> Reviewed-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231122202840.2565153-1-ttabi@nvidia.com
2023-11-29drm/amdgpu: Use another offset for GC 9.4.3 remapLijo Lazar
The legacy region at 0x7F000 maps to valid registers in GC 9.4.3 SOCs. Use 0x1A000 offset instead as MMIO register remap region. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amd/display: Fix some HostVM parameters in DMLTaimur Hassan
[Why] A number of DML parameters related to HostVM were either missing or being set incorrectly, which may cause inaccuracies in calculating margins and determining BW limitations. [How] Correct these values where needed and populate the missing values. Cc: stable@vger.kernel.org Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Taimur Hassan <syed.hassan@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amdkfd: Free gang_ctx_bo and wptr_bo in pqm_uninitZhenGuo Yin
[Why] Memory leaks of gang_ctx_bo and wptr_bo. [How] Free gang_ctx_bo and wptr_bo in pqm_uninit. v2: add a common function pqm_clean_queue_resource to free queue's resources. v3: reset pdd->pqd.num_gws when destorying GWS queue. Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amdgpu: Update EEPROM I2C address for smu v13_0_0Candice Li
Check smu v13_0_0 SKU type to select EEPROM I2C address. Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x
2023-11-29drm/amd/display: Allow DTBCLK disable for DCN35Nicholas Kazlauskas
[Why] DTBCLK is enabled on idle and it will burn power. [How] There's a few issues here: - Always enabling DTBCLK on clock manager init - Setting refclk when DTBCLK is supposed to be disabled - Not applying the correct calculated version refclk, but instead the base value which might be zero On dtbclk_en change we'll message PMFW to enable or disable the clock accordingly. The DTBDTO will be then based on refclk, but it will be set to the default fixed value if there was nothing calculated in DML despite the clock being considered enabled. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amdgpu: Fix cat debugfs amdgpu_regs_didt causes kernel null pointerLu Yao
For 'AMDGPU_FAMILY_SI' family cards, in 'si_common_early_init' func, init 'didt_rreg' and 'didt_wreg' to 'NULL'. But in func 'amdgpu_debugfs_regs_didt_read/write', using 'RREG32_DIDT' 'WREG32_DIDT' lacks of relevant judgment. And other 'amdgpu_ip_block_version' that use these two definitions won't be added for 'AMDGPU_FAMILY_SI'. So, add null pointer judgment before calling. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Lu Yao <yaolu@kylinos.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amd: Enable PCIe PME from D3Mario Limonciello
When dGPU is put into BOCO it may be in D3cold but still able send PME on display hotplug event. For this to work it must be enabled as wake source from D3. When runpm is enabled use pci_wake_from_d3() to mark wakeup as enabled by default. Cc: stable@vger.kernel.org # 6.1+ Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amd/pm: fix a memleak in aldebaran_tables_initDinghao Liu
When kzalloc() for smu_table->ecc_table fails, we should free the previously allocated resources to prevent memleak. Fixes: edd794208555 ("drm/amd/pm: add message smu to get ecc_table v2") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amdgpu: fix AGP addressing when GART is not at 0Alex Deucher
This worked by luck if the GART aperture ended up at 0. When we ended up moving GART on some chips, the GART aperture ended up offsetting the AGP address since the resource->start is a GART offset, not an MC address. Fix this by moving the AGP address setup into amdgpu_bo_gpu_offset_no_check(). v2: check mem_type before checking agp v3: check if the ttm bo has a ttm_tt allocated yet Fixes: 67318cb84341 ("drm/amdgpu/gmc11: set gart placement GC11") Tested-by: Mario Limonciello <mario.limonciello@amd.com> Reported-by: Jesse Zhang <Jesse.Zhang@amd.com> Reported-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: christian.koenig@amd.com Cc: mario.limonciello@amd.com
2023-11-29drm/amd/display: update dcn315 lpddr pstate latencyDmytro Laktyushkin
[WHY/HOW] Increase the pstate latency to improve ac/dc transition Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amd/display: fix ABM disablementHamza Mahfooz
On recent versions of DMUB firmware, if we want to completely disable ABM we have to pass ABM_LEVEL_IMMEDIATE_DISABLE as the requested ABM level to DMUB. Otherwise, LCD eDP displays are unable to reach their maximum brightness levels. So, to fix this whenever the user requests an ABM level of 0 pass ABM_LEVEL_IMMEDIATE_DISABLE to DMUB instead. Also, to keep the user's experience consistent map ABM_LEVEL_IMMEDIATE_DISABLE to 0 when a user tries to read the requested ABM level. Cc: stable@vger.kernel.org # 6.1+ Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amd/display: Fix black screen on video playback with embedded panelSung Joon Kim
[why] We have dynamic power control in driver but should be ignored when power is forced on. [how] Bypass any power control when it's forced on. Cc: stable@vger.kernel.org Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Sung Joon Kim <sungkim@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amd/display: Fix conversions between bytes and KBTaimur Hassan
[Why] There are a number of instances where we convert HostVMMinPageSize or GPUVMMinPageSize from bytes to KB by dividing (rather than multiplying) and vice versa. Additionally, in some cases, a parameter is passed through DML in KB but later checked as if it were in bytes. Cc: stable@vger.kernel.org Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Taimur Hassan <syed.hassan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amdkfd: Use common function for IP version checkMukul Joshi
KFD_GC_VERSION was recently updated to use a new function for IP version checks. As a result, use KFD_GC_VERSION as the common function for all IP version checks in KFD. Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amd/display: Remove config updateTaimur Hassan
[Why] Prevent overwrite of dc->config.use_default_clock_table, as it should be pre-configured. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Taimur Hassan <syed.hassan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amd/display: Update DCN35 clock table policyNicholas Kazlauskas
[Why] The new table doesn't have an implicit mapping between Fclk SOC voltage and MemClk and it currently builds the table off of number of Fclk states rather than DcfClock states. The DML table in use is not correct for functionality or power and does not align with our existing policies for DCN3x. [How] Build the table based on DcfClock with the following assumptions: 1. Raising Soc voltage is the most expensive operation, so assume that running at max DispClock or DppClock is preferable. 2. Assume that we can run at max Fclk / MemClk at any state, but restrict the maximum state to the very last entry in the table as the worst case scenario. 3. Assume that Fclk always has a 2x multiplier on DcfClock unless the table specifies something lower. Reviewed-by: Taimur Hassan <syed.hassan@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amd/display: force toggle rate wa for first link training for a retimerZhongwei
[WHY] Handover from DMUB to driver does not perform link rate toggle. It might cause link training failure for boot up. [HOW] Force toggle rate wa for first link train. link->vendor_specific_lttpr_link_rate_wa should be zero then. Cc: stable@vger.kernel.org # 6.1+ Reviewed-by: Michael Strauss <michael.strauss@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Zhongwei <zhongwei.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amdgpu: correct the amdgpu runtime dereference usage countPrike Liang
Fix the amdgpu runpm dereference usage count. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2023-11-29drm/amd/display: Update min Z8 residency time to 2100 for DCN314Nicholas Kazlauskas
[Why] Some panels with residency period of 2054 exhibit flickering with Z8 at the end of the frame. [How] As a workaround, increase the limit to block these panels. Cc: stable@vger.kernel.org # 6.1+ Reviewed-by: Syed Hassan <syed.hassan@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amd/display: Remove min_dst_y_next_start check for Z8Nicholas Kazlauskas
[Why] Flickering occurs on DRR supported panels when engaged in DRR due to min_dst_y_next becoming larger than the frame size itself. [How] In general, we should be able to enter Z8 when this is engaged but it might be a net power loss even if the calculation wasn't bugged. Don't support enabling Z8 during the DRR region. Cc: stable@vger.kernel.org # 6.1+ Reviewed-by: Syed Hassan <syed.hassan@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/i915/pxp: Add drm_dbgs for critical PXP events.Alan Previn
Debugging PXP issues can't even begin without understanding precedding sequence of important events. Add drm_dbg into the most important PXP events. v5 : - rebase. v4 : - rebase. v3 : - move gt_dbg to after mutex block in function i915_gsc_proxy_component_bind. (Vivaik) v2 : - remove __func__ since drm_dbg covers that (Jani). - add timeout dbg of the restart from front-end (Alan). Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Vivaik Balasubrawmanian <vivaik.balasubrawmanian@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231122191523.58379-1-alan.previn.teres.alexis@intel.com
generated by cgit v1.2.3 (git 2.25.1) at 2026-05-16 03:42:20 +0000