summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2024-01-26drm: bridge: samsung-dsim: Don't use FORCE_STOP_STATEMichael Walle
The FORCE_STOP_STATE bit is unsuitable to force the DSI link into LP-11 mode. It seems the bridge internally queues DSI packets and when the FORCE_STOP_STATE bit is cleared, they are sent in close succession without any useful timing (this also means that the DSI lanes won't go into LP-11 mode). The length of this gibberish varies between 1ms and 5ms. This sometimes breaks an attached bridge (TI SN65DSI84 in this case). In our case, the bridge will fail in about 1 per 500 reboots. The FORCE_STOP_STATE handling was introduced to have the DSI lanes in LP-11 state during the .pre_enable phase. But as it turns out, none of this is needed at all. Between samsung_dsim_init() and samsung_dsim_set_display_enable() the lanes are already in LP-11 mode. The code as it was before commit 20c827683de0 ("drm: bridge: samsung-dsim: Fix init during host transfer") and 0c14d3130654 ("drm: bridge: samsung-dsim: Fix i.MX8M enable flow to meet spec") was correct in this regard. This patch basically reverts both commits. It was tested on an i.MX8M SoC with an SN65DSI84 bridge. The signals were probed and the DSI packets were decoded during initialization and link start-up. After this patch the first DSI packet on the link is a VSYNC packet and the timing is correct. Command mode between .pre_enable and .enable was also briefly tested by a quick hack. There was no DSI link partner which would have responded, but it was made sure the DSI packet was send on the link. As a side note, the command mode seems to just work in HS mode. I couldn't find that the bridge will handle commands in LP mode. Fixes: 20c827683de0 ("drm: bridge: samsung-dsim: Fix init during host transfer") Fixes: 0c14d3130654 ("drm: bridge: samsung-dsim: Fix i.MX8M enable flow to meet spec") Signed-off-by: Michael Walle <mwalle@kernel.org> Signed-off-by: Inki Dae <inki.dae@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231113164344.1612602-1-mwalle@kernel.org
2024-01-26drm/i915: Convert PLL flags to booleansVille Syrjälä
No real reason why the PLL flags need to be a bitmask. Switch to booleans to make the code simpler. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240123093137.9133-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-01-26drm/i915: Suppress old PLL pipe_mask checks for MG/TC/TBT PLLsVille Syrjälä
TC ports have both the MG/TC and TBT PLLs selected simultanously (so that we can switch from MG/TC to TBT as a fallback). This doesn't play well with the state checker that assumes that the old PLL shouldn't have the pipe in its pipe_mask anymore. Suppress that check for these PLLs to avoid spurious WARNs when you disconnect a TC port and a non-disabling modeset happens before actually disabling the port. v2: Only suppress when one of the PLLs is the TBT PLL and the other one is not Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9816 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240123093137.9133-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-01-26drm/i915: Include the PLL name in the debug messagesVille Syrjälä
Make the log easier to parse by including the name of the PLL in the debug prints regarding said PLL. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240123093137.9133-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-01-26drm/sched: Drain all entities in DRM sched run job workerMatthew Brost
All entities must be drained in the DRM scheduler run job worker to avoid the following case. An entity found that is ready, no job found ready on entity, and run job worker goes idle with other entities + jobs ready. Draining all ready entities (i.e. loop over all ready entities) in the run job worker ensures all job that are ready will be scheduled. Cc: Thorsten Leemhuis <regressions@leemhuis.info> Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Closes: https://lore.kernel.org/all/CABXGCsM2VLs489CH-vF-1539-s3in37=bwuOWtoeeE+q26zE+Q@mail.gmail.com/ Reported-and-tested-by: Mario Limonciello <mario.limonciello@amd.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3124 Link: https://lore.kernel.org/all/20240123021155.2775-1-mario.limonciello@amd.com/ Reported-and-tested-by: Vlastimil Babka <vbabka@suse.cz> Closes: https://lore.kernel.org/dri-devel/05ddb2da-b182-4791-8ef7-82179fd159a8@amd.com/T/#m0c31d4d1b9ae9995bb880974c4f1dbaddc33a48a Signed-off-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240124210811.1639040-1-matthew.brost@intel.com
2024-01-26Merge tag 'amd-drm-fixes-6.8-2024-01-25' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.8-2024-01-25: amdgpu: - AC/DC power supply tracking fix - Don't show invalid vram vendor data - SMU 13.0.x fixes - GART fix for umr on systems without VRAM - GFX 10/11 UNORD_DISPATCH fixes - IPS display fixes (required for S0ix on some platforms) - Misc fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240125221503.5019-1-alexander.deucher@amd.com
2024-01-26Merge tag 'drm-xe-fixes-2024-01-25' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes Driver Changes: - Make an ops struct static - Fix an implicit 0 to NULL conversion - A couple of 32-bit fixes - A migration coherency fix for Lunar Lake. - An error path vm id leak fix - Remove PVC references in kunit tests Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZbIb7l0EhpVp5cXE@fedora
2024-01-25drm/msm/mdss: specify cfg bandwidth for SDM670Dmitry Baryshkov
Lower the requested CFG bus bandwidth for the SDM670 platform. The default value is 153600 kBps, which is twice as big as required by the platform according to the vendor kernel. Fixes: a55c8ff252d3 ("drm/msm/mdss: Handle the reg bus ICC path") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Richard Acayan <mailingradian@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/572182/ Link: https://lore.kernel.org/r/20231215013222.827975-1-dmitry.baryshkov@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2024-01-25drm/amd/display: "Enable IPS by default"Roman Li
[Why] IPS was temporary disabled due to instability. It was fixed in dmub firmware and with: - "drm/amd/display: Add IPS checks before dcn register access" - "drm/amd/display: Disable ips before dc interrupt setting" [How] Enable IPS by default. Disable IPS if 0x800 bit set in amdgpu.dcdebugmask module params Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd: Add a DC debug mask for IPSRoman Li
For debugging IPS-related issues, expose a new debug mask that allows to disable IPS. Usage: amdgpu.dcdebugmask=0x800 Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd/display: Disable ips before dc interrupt settingRoman Li
[Why] While in IPS2 an access to dcn registers is not allowed. If interrupt results in dc call, we should disable IPS. [How] Safeguard register access in IPS2 by disabling idle optimization before calling dc interrupt setting api. Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd/display: Replay + IPS + ABM in Full Screen VPBChunTao Tso
[Why] Because ABM will wait VStart to start getting histogram data, it will cause we can't enter IPS while full screnn video playing. [How] Modify the panel refresh rate to the maximun multiple of current refresh rate. Reviewed-by: Dennis Chan <dennis.chan@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: ChunTao Tso <chuntao.tso@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd/display: Add IPS checks before dcn register accessRoman Li
[Why] With IPS enabled a system hangs once PSR is active. PSR active triggers transition to IPS2 state. While in IPS2 an access to dcn registers results in hard hang. Existing check doesn't cover for PSR sequence. [How] Safeguard register access by disabling idle optimization in atomic commit and crtc scanout. It will be re-enabled on next vblank. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd/display: Add Replay IPS register for DMUB command tableAlvin Lee
- Introduce a new Replay mode for DMUB version 0.0.199.0 Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd/display: Allow IPS2 during ReplayNicholas Kazlauskas
[Why & How] Add regkey to block video playback in IPS2 by default Allow idle optimizations in the same spot we allow Replay for video playback usecases. Avoid sending it when there's an external display connected by modifying the allow idle checks to check for active non-eDP screens. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amdgpu/gfx11: set UNORD_DISPATCH in compute MQDsAlex Deucher
This needs to be set to 1 to avoid a potential deadlock in the GC 10.x and newer. On GC 9.x and older, this needs to be set to 0. This can lead to hangs in some mixed graphics and compute workloads. Updated firmware is also required for AQL. Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-01-25drm/amdgpu/gfx10: set UNORD_DISPATCH in compute MQDsAlex Deucher
This needs to be set to 1 to avoid a potential deadlock in the GC 10.x and newer. On GC 9.x and older, this needs to be set to 0. This can lead to hangs in some mixed graphics and compute workloads. Updated firmware is also required for AQL. Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-01-25drm/amd/amdgpu: Assign GART pages to AMD device mappingTom St Denis
This allows kernel mapped pages like the PDB and PTB to be read via the iomem debugfs when there is no vram in the system. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.7.x
2024-01-25drm/amd/pm: Fetch current power limit from FWLijo Lazar
Power limit of SMUv13.0.6 SOCs can be updated by out-of-band ways. Fetch the limit from firmware instead of using cached values. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.7.x
2024-01-25drm/amdgpu: Fix null pointer dereferenceHawking Zhang
amdgpu_reg_state_sysfs_fini could be invoked at the time when asic_func is even not initialized, i.e., amdgpu_discovery_init fails for some reason. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-01-25drm/amdgpu: Show vram vendor only if availableLijo Lazar
Ony if vram vendor info is available, show in sysfs. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.7.x
2024-01-25drm/amd/pm: update the power cap settingKenneth Feng
update the power cap setting for smu_v13.0.0/smu_v13.0.7 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2356 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-01-25drm/amdgpu: Avoid fetching vram vendor informationLijo Lazar
For GFX 9.4.3 APUs, the current method of fetching vram vendor information is not reliable. Avoid fetching the information. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.7.x
2024-01-25drm/amdgpu/pm: Fix the power source flag errorMa Jun
The power source flag should be updated when [1] System receives an interrupt indicating that the power source has changed. [2] System resumes from suspend or runtime suspend Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-01-25drm/amd/display: Fix uninitialized variable usage in core_link_ 'read_dpcd() ↵Srinivasan Shanmugam
& write_dpcd()' functions The 'status' variable in 'core_link_read_dpcd()' & 'core_link_write_dpcd()' was uninitialized. Thus, initializing 'status' variable to 'DC_ERROR_UNEXPECTED' by default. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dpcd.c:226 core_link_read_dpcd() error: uninitialized symbol 'status'. drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dpcd.c:248 core_link_write_dpcd() error: uninitialized symbol 'status'. Cc: stable@vger.kernel.org Cc: Jerry Zuo <jerry.zuo@amd.com> Cc: Jun Lei <Jun.Lei@amd.com> Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd/pm: udpate smu v13.0.6 message permissionYang Wang
update smu v13.0.6 message to allow guest driver set gfx clock. Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25amdgpu/drm: Use vram manager for virtualization page retirementVictor Skvortsov
In runtime, use vram manager for virtualization page retirement. Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amdgpu: Add RAS_POISON_READY host response messageVictor Skvortsov
In a non-FLR page avoidance scenario, the host driver will provide the bad pages in the pf2vf exchange region. Adding a new host response message to indicate when the pf2vf exchange region has been updated. Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amdgpu: Support passing poison consumption ras block to SRIOVYiPeng Chai
Support passing poison consumption ras blocks to SRIOV. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd/display: "Enable IPS by default"Roman Li
[Why] IPS was temporary disabled due to instability. It was fixed in dmub firmware and with: - "drm/amd/display: Add IPS checks before dcn register access" - "drm/amd/display: Disable ips before dc interrupt setting" [How] Enable IPS by default. Disable IPS if 0x800 bit set in amdgpu.dcdebugmask module params Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd: Add a DC debug mask for IPSRoman Li
For debugging IPS-related issues, expose a new debug mask that allows to disable IPS. Usage: amdgpu.dcdebugmask=0x800 Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd/display: Disable ips before dc interrupt settingRoman Li
[Why] While in IPS2 an access to dcn registers is not allowed. If interrupt results in dc call, we should disable IPS. [How] Safeguard register access in IPS2 by disabling idle optimization before calling dc interrupt setting api. Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amdgpu: adjust aca init/fini sequence to match gpu resetYang Wang
- move aca init/fini function into ras init/fini to adapt gpu reset sequence. - add new function amdgpu_aca_reset() Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amdgpu: add aca sysfs remove supportYang Wang
add aca sysfs remove support. Fixes: 37973b69eab4 ("drm/amdgpu: add aca sysfs support") Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd/display: Fix a potential buffer overflow in 'dp_dsc_clock_en_read()'Srinivasan Shanmugam
Tell snprintf() to store at most 10 bytes in the output buffer instead of 30. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:1508 dp_dsc_clock_en_read() error: snprintf() is printing too much 30 vs 10 Fixes: c06e09b76639 ("drm/amd/display: Add DSC parameters logging to debugfs") Cc: Alex Hung <alex.hung@amd.com> Cc: Qingqing Zhuo <qingqing.zhuo@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amdgpu: Fix module unload hang with RAS enabledMukul Joshi
The driver unload hangs because the page retirement kthread cannot be stopped as it is sleeping and waiting on page retirement event to occur. Add kthread_should_stop() to the event condition to wake up the kthread when kthread stop is called during driver unload. Fixes: 3fdcd0a31d7a ("drm/amdgpu: Prepare for asynchronous processing of umc page retirement") Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amdgpu/pm: Add default case for smu IH process funcMa Jun
Add default case for smu IH process func. Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amdgpu: convert some variable sized arrays to [] styleAlex Deucher
Replace [1] with []. Silences UBSAN warnings. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3107 Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amdgpu/gfx11: set UNORD_DISPATCH in compute MQDsAlex Deucher
This needs to be set to 1 to avoid a potential deadlock in the GC 10.x and newer. On GC 9.x and older, this needs to be set to 0. This can lead to hangs in some mixed graphics and compute workloads. Updated firmware is also required for AQL. Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-01-25drm/amdgpu/gfx10: set UNORD_DISPATCH in compute MQDsAlex Deucher
This needs to be set to 1 to avoid a potential deadlock in the GC 10.x and newer. On GC 9.x and older, this needs to be set to 0. This can lead to hangs in some mixed graphics and compute workloads. Updated firmware is also required for AQL. Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-01-25drm/amd/amdgpu: Assign GART pages to AMD device mappingTom St Denis
This allows kernel mapped pages like the PDB and PTB to be read via the iomem debugfs when there is no vram in the system. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amdgpu: Fix return type in 'aca_bank_hwip_is_matched()'Srinivasan Shanmugam
Change the return type of "if (!bank || type == ACA_HWIP_TYPE_UNKNOW)" to be bool instead of int. Fixes the below: drivers/gpu/drm/amd/amdgpu/amdgpu_aca.c:185 aca_bank_hwip_is_matched() warn: signedness bug returning '(-22)' Fixes: f5e4cc8461c4 ("drm/amdgpu: implement RAS ACA driver framework") Cc: Yang Wang <kevinyang.wang@amd.com> Cc: Hawking Zhang <Hawking.Zhang@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd/pm: Fetch current power limit from FWLijo Lazar
Power limit of SMUv13.0.6 SOCs can be updated by out-of-band ways. Fetch the limit from firmware instead of using cached values. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amdgpu/pptable: convert some variable sized arrays to [] styleAlex Deucher
Replace [1] with []. Silences UBSAN warnings. Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2039926 Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/xe: Fix crash in trace_dma_fence_init()José Roberto de Souza
trace_dma_fence_init() uses dma_fence_ops functions like get_driver_name() and get_timeline_name() to generate trace information but the Xe KMD implementation of those functions makes use of xe_hw_fence_ctx that was being set after dma_fence_init(). So here just inverting the order to fix the crash. Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240124171830.95774-1-jose.souza@intel.com
2024-01-25drm/ttm: replace busy placement with flags v6Somalapuram Amaranath
Instead of a list of separate busy placement add flags which indicate that a placement should only be used when there is room or if we need to evict. v2: add missing TTM_PL_FLAG_IDLE for i915 v3: fix auto build test ERROR on drm-tip/drm-tip v4: fix some typos pointed out by checkpatch v5: cleanup some rebase problems with VMWGFX v6: implement some missing VMWGFX functionality pointed out by Zack, rename the flags as suggested by Michel, rebase on drm-tip and adjust XE as well Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com> Reviewed-by: Zack Rusin <zack.rusin@broadcom.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240112125158.2748-4-christian.koenig@amd.com
2024-01-25drm/i915/psr: Only allow PSR in LPSP mode on HSW non-ULTVille Syrjälä
On HSW non-ULT (or at least on Dell Latitude E6540) external displays start to flicker when we enable PSR on the eDP. We observe a much higher SR and PC6 residency than should be possible with an external display, and indeen much higher than what we observe with eDP disabled and only the external display enabled. Looks like the hardware is somehow ignoring the fact that the external display is active during PSR. I wasn't able to redproduce this on my HSW ULT machine, or BDW. So either there's something specific about this particular laptop (eg. some unknown firmware thing) or the issue is limited to just non-ULT HSW systems. All known registers that could affect this look perfectly reasonable on the affected machine. As a workaround let's unmask the LPSP event to prevent PSR entry except while in LPSP mode (only pipe A + eDP active). This will prevent PSR entry entirely when multiple pipes are active. The one slight downside is that we now also prevent PSR entry when driving eDP with pipe B or C, but I think that's a reasonable tradeoff to avoid having to implement a more complex workaround. Cc: stable@vger.kernel.org Fixes: 783d8b80871f ("drm/i915/psr: Re-enable PSR1 on hsw/bdw") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10092 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240118212131.31868-1-ville.syrjala@linux.intel.com Reviewed-by: Jouni Högander <jouni.hogander@intel.com> (cherry picked from commit 94501c3ca6400e463ff6cc0c9cf4a2feb6a9205d) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2024-01-25Merge tag 'exynos-drm-fixes-for-v6.8-rc2' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes Several fixups - Minor fix in `drm/exynos: gsc: gsc_runtime_resume` . The patch ensures `clk_disable_unprepare()` is called on the first element of `ctx->clocks` array. This issue was identified by the Linux Verification Center. - Fix excessive stack usage in `fimd_win_set_pixfmt()` in `drm/exynos` . The issue, highlighted by gcc, involved an unnecessary on-stack copy of the large `exynos_drm_plane` structure, now replaced with a pointer. - Fix an incorrect type issue in `exynos_drm_fimd.c` module . Addresses an incorrect type issue in `fimd_commit()` within the `exynos_drm_fimd.c` The problem was reported by the kernel test robot[1]. [1] https://lore.kernel.org/oe-kbuild-all/202312140930.Me9yWf8F-lkp@intel.com/ - Fix a typo in the dt-bindings for `samsung,exynos-mixer` . Changes 'regs' to the correct property name 'reg' in the dt-bindings documentation for `samsung,exynos-mixer` Signed-off-by: Dave Airlie <airlied@redhat.com> From: Inki Dae <inki.dae@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240122072407.39546-1-inki.dae@samsung.com
2024-01-25Merge tag 'drm-misc-next-fixes-2024-01-19' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes A null pointer dereference fix for v3d and a protection fault fix for ttm. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/5zrphn2nhxnwillxlmo6ap3zh7qjt3jgydlm5sntuc4fzvwhpo@hznprx2bjyi7
2024-01-25Merge tag 'drm-intel-next-fixes-2024-01-19' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - DSI sequence revert to fix GitLab #10071 and DP test-pattern fix - Drop -Wstringop-overflow (broken on GCC11) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZaozNnAGhu6Ec6cb@jlahtine-mobl.ger.corp.intel.com
generated by cgit v1.2.3 (git 2.25.1) at 2026-05-08 12:44:05 +0000