| Age | Commit message (Collapse) | Author |
|---|
|
Add support for the drm_panic module, which displays a message to
the screen when a kernel panic occurs.
v5:
* Also check that the plane is visible and primary. (Thomas Zimmermann)
v7:
* use drm_for_each_primary_visible_plane()
v8:
* Replace get_scanout_buffer() logic with drm_panic_set_buffer()
(Thomas Zimmermann)
v9:
* Revert to using get_scanout_buffer() (Sima)
* move get_scanout_buffer() to plane helper functions (Thomas Zimmermann)
v12:
* Use array for map and pitch in struct drm_scanout_buffer
to support multi-planar format later. (Thomas Zimmermann)
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163432.352518-8-jfalempe@redhat.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Add support for the drm_panic module, which displays a user-friendly
message to the screen when a kernel panic occurs.
v8:
* Replace get_scanout_buffer() with drm_panic_set_buffer()
(Thomas Zimmermann)
v9:
* Revert to using get_scanout_buffer() (Sima)
* move get_scanout_buffer() to plane helper functions (Thomas Zimmermann)
v12:
* Use array for map and pitch in struct drm_scanout_buffer
to support multi-planar format later. (Thomas Zimmermann)
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163432.352518-7-jfalempe@redhat.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
This was initialy done for imx6, but should work on most drivers
using drm_fb_dma_helper.
v8:
* Replace get_scanout_buffer() logic with drm_panic_set_buffer()
(Thomas Zimmermann)
v9:
* go back to get_scanout_buffer()
* move get_scanout_buffer() to plane helper functions
v12:
* Rename drm_panic_gem_get_scanout_buffer to drm_fb_dma_get_scanout_buffer
(Thomas Zimmermann)
* Remove the #ifdef CONFIG_DRM_PANIC, and build it unconditionnaly, as
it's a small function. (Thomas Zimmermann)
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163432.352518-6-jfalempe@redhat.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Add a debugfs file, so you can test drm_panic without freezing
your machine. This is unsafe, and should be enabled only for
developer or tester.
To display the drm_panic screen on the device 0:
echo 1 > /sys/kernel/debug/dri/0/drm_panic_plane_0
v9:
* Create a debugfs file for each plane in the device's debugfs
directory. This allows to test for each plane of each GPU
independently.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163432.352518-5-jfalempe@redhat.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Add support for the following formats:
DRM_FORMAT_RGB565
DRM_FORMAT_RGBA5551
DRM_FORMAT_XRGB1555
DRM_FORMAT_ARGB1555
DRM_FORMAT_RGB888
DRM_FORMAT_XRGB8888
DRM_FORMAT_ARGB8888
DRM_FORMAT_XBGR8888
DRM_FORMAT_XRGB2101010
DRM_FORMAT_ARGB2101010
v10:
* move and simplify the functions from the drm format helper to drm_panic
v12:
* Use array for map and pitch in struct drm_scanout_buffer
to support multi-planar format later. (Thomas Zimmermann)
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163432.352518-4-jfalempe@redhat.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
This module displays a user friendly message when a kernel panic
occurs. It currently doesn't contain any debug information,
but that can be added later.
v2
* Use get_scanout_buffer() instead of the drm client API.
(Thomas Zimmermann)
* Add the panic reason to the panic message (Nerdopolis)
* Add an exclamation mark (Nerdopolis)
v3
* Rework the drawing functions, to write the pixels line by line and
to use the drm conversion helper to support other formats.
(Thomas Zimmermann)
v4
* Use drm_fb_r1_to_32bit for fonts (Thomas Zimmermann)
* Remove the default y to DRM_PANIC config option (Thomas Zimmermann)
* Add foreground/background color config option
* Fix the bottom lines not painted if the framebuffer height
is not a multiple of the font height.
* Automatically register the device to drm_panic, if the function
get_scanout_buffer exists. (Thomas Zimmermann)
v5
* Change the drawing API, use drm_fb_blit_from_r1() to draw the font.
* Also add drm_fb_fill() to fill area with background color.
* Add draw_pixel_xy() API for drivers that can't provide a linear buffer.
* Add a flush() callback for drivers that needs to synchronize the buffer.
* Add a void *private field, so drivers can pass private data to
draw_pixel_xy() and flush().
v6
* Fix sparse warning for panic_msg and logo.
v7
* Add select DRM_KMS_HELPER for the color conversion functions.
v8
* Register directly each plane to the panic notifier (Sima)
* Add raw_spinlock to properly handle concurrency (Sima)
* Register plane instead of device, to avoid looping through plane
list, and simplify code.
* Replace get_scanout_buffer() logic with drm_panic_set_buffer()
(Thomas Zimmermann)
* Removed the draw_pixel_xy() API, will see later if it can be added back.
v9
* Revert to using get_scanout_buffer() (Sima)
* Move get_scanout_buffer() and panic_flush() to the plane helper
functions (Thomas Zimmermann)
* Register all planes with get_scanout_buffer() to the panic notifier
* Use drm_panic_lock() to protect against race (Sima)
v10
* Move blit and fill functions back in drm_panic (Thomas Zimmermann).
* Simplify the text drawing functions.
* Use kmsg_dumper instead of panic_notifier (Sima).
v12
* Use array for map and pitch in struct drm_scanout_buffer
to support multi-planar format later. (Thomas Zimmermann)
* Better indent struct drm_scanout_buffer declaration. (Thomas Zimmermann)
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163432.352518-3-jfalempe@redhat.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Rough sketch for the locking of drm panic printing code. The upshot of
this approach is that we can pretty much entirely rely on the atomic
commit flow, with the pair of raw_spin_lock/unlock providing any
barriers we need, without having to create really big critical
sections in code.
This also avoids the need that drivers must explicitly update the
panic handler state, which they might forget to do, or not do
consistently, and then we blow up in the worst possible times.
It is somewhat racy against a concurrent atomic update, and we might
write into a buffer which the hardware will never display. But there's
fundamentally no way to avoid that - if we do the panic state update
explicitly after writing to the hardware, we might instead write to an
old buffer that the user will barely ever see.
Note that an rcu protected deference of plane->state would give us the
the same guarantees, but it has the downside that we then need to
protect the plane state freeing functions with call_rcu too. Which
would very widely impact a lot of code and therefore doesn't seem
worth the complexity compared to a raw spinlock with very tiny
critical sections. Plus rcu cannot be used to protect access to
peek/poke registers anyway, so we'd still need it for those cases.
Peek/poke registers for vram access (or a gart pte reserved just for
panic code) are also the reason I've gone with a per-device and not
per-plane spinlock, since usually these things are global for the
entire display. Going with per-plane locks would mean drivers for such
hardware would need additional locks, which we don't want, since it
deviates from the per-console takeoverlocks design.
Longer term it might be useful if the panic notifiers grow a bit more
structure than just the absolute bare
EXPORT_SYMBOL(panic_notifier_list) - somewhat aside, why is that not
EXPORT_SYMBOL_GPL ... If panic notifiers would be more like console
drivers with proper register/unregister interfaces we could perhaps
reuse the very fancy console lock with all it's check and takeover
semantics that John Ogness is developing to fix the console_lock mess.
But for the initial cut of a drm panic printing support I don't think
we need that, because the critical sections are extremely small and
only happen once per display refresh. So generally just 60 tiny locked
sections per second, which is nothing compared to a serial console
running a 115kbaud doing really slow mmio writes for each byte. So for
now the raw spintrylock in drm panic notifier callback should be good
enough.
Another benefit of making panic notifiers more like full blown
consoles (that are used in panics only) would be that we get the two
stage design, where first all the safe outputs are used. And then the
dangerous takeover tricks are deployed (where for display drivers we
also might try to intercept any in-flight display buffer flips, which
if we race and misprogram fifos and watermarks can hang the memory
controller on some hw).
For context the actual implementation on the drm side is by Jocelyn
and this patch is meant to be combined with the overall approach in
v7 (v8 is a bit less flexible, which I think is the wrong direction):
https://lore.kernel.org/dri-devel/20240104160301.185915-1-jfalempe@redhat.com/
Note that the locking is very much not correct there, hence this
separate rfc.
Starting from v10, I (Jocelyn) have included this patch in the drm_panic
series, and done the corresponding changes.
v2:
- fix authorship, this was all my typing
- some typo oopsies
- link to the drm panic work by Jocelyn for context
v10:
- Use spinlock_irqsave/restore (John Ogness)
v11:
- Use macro instead of inline functions for drm_panic_lock/unlock (John Ogness)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163432.352518-2-jfalempe@redhat.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
We have DRM_MODE_FMT and DRM_MODE_ARG() macros to allow unified debug
printing of modes in any printk-formatted logging. Prefer them over
drm_mode_debug_printmodeline().
This allows drm device specific logging of modes, in the right drm debug
category, and inline with the rest of the logging instead of split to
multiple lines.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/6df18588dfa17c5d0a1501f5af9ff21f25a1981b.1712568037.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Prefer drm device based drm_dbg_kms(), drm_err(), drm_WARN_ON() over
DRM_DEBUG_KMS(), DRM_ERROR(), and WARN_ON(). Also update encoder,
connector, and crtc logging to include the object id and name, where
possible.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/b8557c4b2db0e5c931a6d82b5cc8ac5f3a3e1a77.1712568037.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Prefer drm device based drm_dbg_kms() over DRM_DEBUG_KMS().
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/187a7e8e350569a78ebe02ff83ac3b933c8a5355.1712568037.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Switch to drm device based logging and WARNs, and unify connector and
crtc logging formats. Pass drm device around a bit more to be able to do
this. Drop logging for -ENOMEM.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/4fb77e6039bcda7448d1187bc5cd7a5ac4d393aa.1712568037.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Prefer drm_dbg_kms() and drm_dbg_lease() over DRM_DEBUG_KMS() and
DRM_DEBUG() to debug log the drm device info. Fix some debug categories
and unify connector logging while at it.
v2: Drop superfluous newline
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/7f3dd5b4a33f964c6903c7a964da5397f4084aeb.1712568037.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Prefer drm_err() and drm_dbg_kms() over DRM_ERROR() and DRM_DEBUG_KMS().
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/3342dd2e98fedd618e5aeef26c44044cd32ead20.1712568037.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Prefer drm_dbg_kms() over DRM_DEBUG_KMS() to debug log the drm device
info.
v2: Drop changes to mode printing (Ville)
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> # v1
Link: https://patchwork.freedesktop.org/patch/msgid/8b6a83edd1c3896b9d652b5368702eba5f382a1c.1712568037.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Use a more suitable type to avoid the cast.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4dc7bfc48e65d29829843941a70c8bf97b87abcc.1712655867.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
To avoid accessing and parsing the raw EDID with drm_edid_raw(), switch
to the struct drm_edid based function to extract product id, and use the
drm printer function to debug log it.
The underlying assumption is that struct drm_edid_product_id and struct
lvds_pnp_id describe identical data, albeit with slightly different
member definitions.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ec5148dd43221b32cb2066bc7fd264a069c1188b.1712655867.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add a function to print a decoded EDID vendor and product id to a drm
printer, optionally with the raw data.
v2:
- refactor date printing
- use seq_buf to avoid kasprintf() (Ville)
- handle week == 0 (Ville)
- use be16_to_cpu() on manufacturer_name
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Melissa Wen <mwen@igalia.com> # v1
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/32bbc83ee6557809ef6d7a5edb1bc8ef4d56d10f.1712655867.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add a struct drm_edid based function to get the vendor and product ID
from an EDID. Add a separate struct for defining this part of the EDID,
with defined byte order for manufacturer name, product code and serial
number.
v2: Define manufacturer_name as __be16 instead of u8[2] (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/df0e7dedbf7f2c190039d6e6eae3e126eba113c9.1712655867.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
When Output Resource (dcb->or) value is assigned in
fabricate_dcb_output(), there may be out of bounds access to
dac_users array in case dcb->or is zero because ffs(dcb->or) is
used as index there.
The 'or' argument of fabricate_dcb_output() must be interpreted as a
number of bit to set, not value.
Utilize macros from 'enum nouveau_or' in calls instead of hardcoding.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 2e5702aff395 ("drm/nouveau: fabricate DCB encoder table for iMac G4")
Fixes: 670820c0e6a9 ("drm/nouveau: Workaround incorrect DCB entry on a GeForce3 Ti 200.")
Signed-off-by: Mikhail Kobuk <m.kobuk@ispras.ru>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240411110854.16701-1-m.kobuk@ispras.ru
|
|
Running a lot of VK CTS in parallel against nouveau, once every
few hours you might see something like this crash.
BUG: kernel NULL pointer dereference, address: 0000000000000008
PGD 8000000114e6e067 P4D 8000000114e6e067 PUD 109046067 PMD 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 7 PID: 53891 Comm: deqp-vk Not tainted 6.8.0-rc6+ #27
Hardware name: Gigabyte Technology Co., Ltd. Z390 I AORUS PRO WIFI/Z390 I AORUS PRO WIFI-CF, BIOS F8 11/05/2021
RIP: 0010:gp100_vmm_pgt_mem+0xe3/0x180 [nouveau]
Code: c7 48 01 c8 49 89 45 58 85 d2 0f 84 95 00 00 00 41 0f b7 46 12 49 8b 7e 08 89 da 42 8d 2c f8 48 8b 47 08 41 83 c7 01 48 89 ee <48> 8b 40 08 ff d0 0f 1f 00 49 8b 7e 08 48 89 d9 48 8d 75 04 48 c1
RSP: 0000:ffffac20c5857838 EFLAGS: 00010202
RAX: 0000000000000000 RBX: 00000000004d8001 RCX: 0000000000000001
RDX: 00000000004d8001 RSI: 00000000000006d8 RDI: ffffa07afe332180
RBP: 00000000000006d8 R08: ffffac20c5857ad0 R09: 0000000000ffff10
R10: 0000000000000001 R11: ffffa07af27e2de0 R12: 000000000000001c
R13: ffffac20c5857ad0 R14: ffffa07a96fe9040 R15: 000000000000001c
FS: 00007fe395eed7c0(0000) GS:ffffa07e2c980000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 000000011febe001 CR4: 00000000003706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
...
? gp100_vmm_pgt_mem+0xe3/0x180 [nouveau]
? gp100_vmm_pgt_mem+0x37/0x180 [nouveau]
nvkm_vmm_iter+0x351/0xa20 [nouveau]
? __pfx_nvkm_vmm_ref_ptes+0x10/0x10 [nouveau]
? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau]
? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau]
? __lock_acquire+0x3ed/0x2170
? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau]
nvkm_vmm_ptes_get_map+0xc2/0x100 [nouveau]
? __pfx_nvkm_vmm_ref_ptes+0x10/0x10 [nouveau]
? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau]
nvkm_vmm_map_locked+0x224/0x3a0 [nouveau]
Adding any sort of useful debug usually makes it go away, so I hand
wrote the function in a line, and debugged the asm.
Every so often pt->memory->ptrs is NULL. This ptrs ptr is set in
the nv50_instobj_acquire called from nvkm_kmap.
If Thread A and Thread B both get to nv50_instobj_acquire around
the same time, and Thread A hits the refcount_set line, and in
lockstep thread B succeeds at refcount_inc_not_zero, there is a
chance the ptrs value won't have been stored since refcount_set
is unordered. Force a memory barrier here, I picked smp_mb, since
we want it on all CPUs and it's write followed by a read.
v2: use paired smp_rmb/smp_wmb.
Cc: <stable@vger.kernel.org>
Fixes: be55287aa5ba ("drm/nouveau/imem/nv50: embed nvkm_instobj directly into nv04_instobj")
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240411011510.2546857-1-airlied@gmail.com
|
|
After my fix yesterday, I ran into another problem of the same kind:
aarch64-linux-ld: drivers/gpu/drm/bridge/analogix/analogix_dp_core.o: in function `drm_dp_dpcd_readb':
analogix_dp_core.c:(.text+0x194): undefined reference to `drm_dp_dpcd_read'
aarch64-linux-ld: drivers/gpu/drm/bridge/analogix/analogix_dp_core.o: in function `drm_dp_dpcd_writeb':
analogix_dp_core.c:(.text+0x214): undefined reference to `drm_dp_dpcd_write'
aarch64-linux-ld: drivers/gpu/drm/bridge/analogix/analogix_dp_core.o: in function `analogix_dp_stop_crc':
analogix_dp_core.c:(.text+0x4b0): undefined reference to `drm_dp_stop_crc'
aarch64-linux-ld: drivers/gpu/drm/bridge/analogix/analogix_dp_core.o: in function `analogix_dp_start_crc':
analogix_dp_core.c:(.text+0xbe8): undefined reference to `drm_dp_start_crc'
Add the same dependency again to ROCKCHIP_ANALOGIX_DP after checking that
nothing else selects the analogix driver. Also add a dependency to
DRM_ANALOGIX_DP to make it easier to identifier future problems of
this type when they get introduced.
Fixes: 0323287de87d ("drm: Switch DRM_DISPLAY_DP_HELPER to depends on")
Fixes: d1ef8fc18be6 ("drm: fix DRM_DISPLAY_DP_HELPER dependencies")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405143531.925589-1-arnd@kernel.org
|
|
In vc4_hdmi_audio_init() of_get_address() may return
NULL which is later dereferenced. Fix this bug by adding NULL check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: bb7d78568814 ("drm/vc4: Add HDMI audio support")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409075622.11783-1-amishin@t-argos.ru
|
|
Create a simple data struct to hold compatible data so that we don't
have to do the casts to void pointer to hold data.
Fixes the following warning:
drivers/gpu/drm/lima/lima_drv.c:387:13: error: cast to smaller integer
type 'enum lima_gpu_id' from 'const void *'
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240401224329.1228468-3-nunes.erico@gmail.com
|
|
lima uses a shared interrupt, so the interrupt handlers must be prepared
to be called at any time. At driver removal time, the clocks are
disabled early and the interrupts stay registered until the very end of
the remove process due to the devm usage.
This is potentially a bug as the interrupts access device registers
which assumes clocks are enabled. A crash can be triggered by removing
the driver in a kernel with CONFIG_DEBUG_SHIRQ enabled.
This patch frees the interrupts at each lima device finishing callback
so that the handlers are already unregistered by the time we fully
disable clocks.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240401224329.1228468-2-nunes.erico@gmail.com
|
|
There is a race condition in which a rendering job might take just long
enough to trigger the drm sched job timeout handler but also still
complete before the hard reset is done by the timeout handler.
This runs into race conditions not expected by the timeout handler.
In some very specific cases it currently may result in a refcount
imbalance on lima_pm_idle, with a stack dump such as:
[10136.669170] WARNING: CPU: 0 PID: 0 at drivers/gpu/drm/lima/lima_devfreq.c:205 lima_devfreq_record_idle+0xa0/0xb0
...
[10136.669459] pc : lima_devfreq_record_idle+0xa0/0xb0
...
[10136.669628] Call trace:
[10136.669634] lima_devfreq_record_idle+0xa0/0xb0
[10136.669646] lima_sched_pipe_task_done+0x5c/0xb0
[10136.669656] lima_gp_irq_handler+0xa8/0x120
[10136.669666] __handle_irq_event_percpu+0x48/0x160
[10136.669679] handle_irq_event+0x4c/0xc0
We can prevent that race condition entirely by masking the irqs at the
beginning of the timeout handler, at which point we give up on waiting
for that job entirely.
The irqs will be enabled again at the next hard reset which is already
done as a recovery by the timeout handler.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405152951.1531555-4-nunes.erico@gmail.com
|
|
In commit 53cb55b20208 ("drm/lima: handle spurious timeouts due to high
irq latency") a check was added to detect an unexpectedly high interrupt
latency timeout.
With further investigation it was noted that on Mali-450 the pp bcast
irq may also be a trigger of race conditions against the timeout
handler, so add it to this check too.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405152951.1531555-3-nunes.erico@gmail.com
|
|
This is needed because we want to reset those devices in device-agnostic
code such as lima_sched.
In particular, masking irqs will be useful before a hard reset to
prevent race conditions.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405152951.1531555-2-nunes.erico@gmail.com
|
|
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().
Note that the upper limit of ida_simple_get() is exclusive, but the one of
ida_alloc_range() is inclusive. So a -1 has been added when needed.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7108c1871c6cb08d403c4fa6534bc7e6de4cb23d.1705245316.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
There are few knobs inside GuC firmware to control VFs scheduling.
Add basic functions to support their reconfigurations.
We will start using them shortly once we prepare debugfs.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240410170338.1199-6-michal.wajdeczko@intel.com
|
|
Many of the GuC actions use KLVs to pass additional parameters or
configuration data. Add few helper functions for better reporting
any information related to KLVs.
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Acked-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240410170338.1199-5-michal.wajdeczko@intel.com
|
|
In upcoming patches the PF driver will add support to change GuC
policies and will need to use PF2GUC_UPDATE_VGT_POLICY messages.
Add necessary definitions to our GuC firmware ABI header.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240410170338.1199-4-michal.wajdeczko@intel.com
|
|
PF driver will maintain VF's configuration data mostly on the
GT level, but some internal data is located at the device level.
To allow easy access to that data from the GT level functions, and
to minimize code duplications, introduce set of helper functions
and macros for explicit use by the PF driver.
We will use these helpers in upcoming patches.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240410170338.1199-3-michal.wajdeczko@intel.com
|
|
PF driver will maintain configurations and resources for every VF
and this data could span multiple tiles and/or GTs. Prepare mutex
to protect data that we will add in upcoming patches.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240410170338.1199-2-michal.wajdeczko@intel.com
|
|
Backmerging drm-next in order to get up-to-date and in particular
to access commit 9ca5facd0400f610f3f7f71aeb7fc0b949a48c67.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
This is an effort to unify hmmptr (aka system allocator)
and userptr code. hmm_range_fault is used to populate
a virtual address range for both hmmptr and userptr,
instead of hmmptr using hmm_range_fault and userptr
using get_user_pages_fast.
This also aligns with AMD gpu driver's behavior. In
long term, we plan to put some common helpers in this
area to drm layer so it can be re-used by different
vendors.
-v1
use the function with parameter to confirm whether lock is
acquired by the caller or needs to be acquired in hmm_range_fault.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Oak Zeng <oak.zeng@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412095237.1048599-3-himal.prasad.ghimiray@intel.com
|
|
Introduce a helper function xe_userptr_populate_range to populate
a userptr range. This functions calls hmm_range_fault to read
CPU page tables and populate all pfns/pages of this virtual address
range. For system memory page, dma-mapping is performed
to get a dma-address which can be used later for GPU to access pages.
v1: Address review comments:
separate a npage_in_range function (Matt)
reparameterize function xe_userptr_populate_range function (Matt)
move mmu_interval_read_begin() call into while loop (Thomas)
s/mark_range_accessed/xe_mark_range_accessed (Thomas)
use set_page_dirty_lock (vs set_page_dirty) (Thomas)
move a few checking in xe_vma_userptr_pin_pages to hmm.c (Matt)
v2: Remove device private page support. Only support system
pages for now. use dma-map-sg rather than dma-map-page (Matt/Thomas)
v3: Address review comments:
Squash patch "drm/xe: Introduce a helper to free sg table" to current
patch (Matt)
start and end addresses are already page aligned (Matt)
Do mmap_read_lock and mmap_read_unlock for hmm_range_fault incase of
non system allocator call. (Matt)
Drop kthread_use_mm and kthread_unuse_mm. (Matt)
No need of kernel-doc for static functions.(Matt)
Modify function names. (Matt)
Free sgtable incase of dma_map_sgtable failure.(Matt)
Modify loop for hmm_range_fault.(Matt)
v4: Remove the dummy function for xe_hmm_userptr_populate_range
since CONFIG_HMM_MIRROR is needed. (Matt)
Change variable names start/end to userptr_start/userptr_end.(Matt)
v5: Remove device private page support info from commit message. Since
the patch doesn't support device page handling. (Thomas)
Signed-off-by: Oak Zeng <oak.zeng@intel.com>
Co-developed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@intel.com>
Cc: Brian Welty <brian.welty@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412095237.1048599-2-himal.prasad.ghimiray@intel.com
|
|
In malidp_mw_connector_reset, new memory is allocated with kzalloc, but
no check is performed. In order to prevent null pointer dereferencing,
ensure that mw_state is checked before calling
__drm_atomic_helper_connector_reset.
Fixes: 8cbc5caf36ef ("drm: mali-dp: Add writeback connector")
Signed-off-by: Huai-Yuan Liu <qq810974084@gmail.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240407063053.5481-1-qq810974084@gmail.com
|
|
Add a unreference bo in the error path, to prevent leaking a bo ref.
Return 0 on success to clarify the success path.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 44e694958b95 ("drm/xe/display: Implement display support")
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404090302.68422-1-maarten.lankhorst@linux.intel.com
|
|
Add Tegra Security Engine details to the SID table in host1x driver.
These entries are required to be in place to configure the stream ID
for SE. Register writes to stream ID registers fail otherwise.
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
[Why]
DVI is TMDS signal like HDMI but without audio. Current signal check
does not correctly reflect DVI clock programming.
[How]
Define a new signal check for TMDS that includes DVI to HDMI TMDS
programming.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Need to update the power sequence to help prevent potential issues
like multi-display or multi-plane.
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This version brings along the following:
- DCN10 fixes
- DCN316 fixes
- DML2 fixes
- DWB fixes
- Expanded FAMS support
- Misc code style fixes
- ODM fixes
- VSC SDP fixes
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit makes some small adjustments in the dwb header.
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix memory leak due to a leaked mmget reference on an error handling
code path that is triggered when attempting to create KFD processes
while a GPU reset is in progress.
Fixes: 0ab2d7532b05 ("drm/amdkfd: prepare per-process debug enable and disable")
CC: Xiaogang Chen <xiaogang.chen@amd.com>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Tested-by: Harish Kasiviswanthan <Harish.Kasiviswanthan@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Change DP_PHY_REPEATER_EXTENDED_WAIT_TIMEOUT with
DP_PHY_REPEATER_128B132B_RATES.
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Set OTG/OPTC parameters to 0 if something goes wrong on DCN10.
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Set OTG/OPTC parameter to 0 if failed to set DRR.
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update DCN10 to use legacy fast update and ensure that the MPCC count is
the same as the pipe_count.
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
DCN 1.0 is not ready for the P010 support.
[HOW]
1. Set the P010 plan_cap of DCN 1.0 to be false.
2. Let the DM do the plan cap initialization of DCN 1.0.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Figo Wang <shen-hong.wang@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Some of the resource capabilities for DCN201 and the debug default
option are outdated. This commit just set some of the missing
configurations for DCN201.
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
