| Age | Commit message (Collapse) | Author |
|
Add check for the return value of drm_cvt_mode() and return the error if
it fails in order to avoid NULL pointer dereference.
Fixes: 1b043677d4be ("drm/qxl: add qxl_add_mode helper function")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240621071031.1987974-1-nichen@iscas.ac.cn
|
|
The dma sync operation needs to be done with DMA_BIDIRECTIONAL when
the BO is prepared for both read and write operations.
Fixes: a8c21a5451d8 ("drm/etnaviv: add initial etnaviv DRM driver")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
|
|
The etnaviv devcoredump is created in the GPU reset path, which
must make forward progress to avoid stalling memory reclaim on
unsignalled dma fences. The currently used __GFP_NORETRY does not
prohibit sleeping on direct reclaim, breaking the forward progress
guarantee. Switch to GFP_NOWAIT, which allows background reclaim
to be triggered, but avoids any stalls waiting for direct reclaim.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Refine the value and mask define of bit depth for mtk_ovl_set bit_depth().
Use cmdq_pkt_write_mask() instead of cmdq_pkt_write() to avoid bit depth
settings being overwritten.
Fixes: fb36c5020c9c ("drm/mediatek: Add support for AR30 and BA30 overlays")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240624095726.18818-1-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
For MTL+ platforms we use PICA chips for Type-C support and
hence mg programming is not needed.
Fixes issue with drm warn of TC port not being in legacy mode.
Cc: stable@vger.kernel.org
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625111840.597574-1-mika.kahola@intel.com
|
|
With the recent switch from fbdev-generic to fbdev-dma, the driver now
requires the DRM GEM DMA helpers. This dependency is missing, and will
cause a link failure if fbdev emulation is enabled.
Add the missing dependency.
Fixes: 0992284b4fe4 ("drm/mediatek: Use fbdev-dma")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Chun-Kuang Hu <chunkuang.hu@mediatek.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240620054708.2230665-1-wenst@chromium.org
|
|
In nv17_tv_get_ld_modes(), the return value of drm_mode_duplicate() is
assigned to mode, which will lead to a possible NULL pointer dereference
on failure of drm_mode_duplicate(). Add a check to avoid npd.
Cc: stable@vger.kernel.org
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625081828.2620794-1-make24@iscas.ac.cn
|
|
In nv17_tv_get_hd_modes(), the return value of drm_mode_duplicate() is
assigned to mode, which will lead to a possible NULL pointer dereference
on failure of drm_mode_duplicate(). The same applies to drm_cvt_mode().
Add a check to avoid null pointer dereference.
Cc: stable@vger.kernel.org
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625081029.2619437-1-make24@iscas.ac.cn
|
|
If reg list is already loaded on PSP 13.0.2 SOCs, psp will give
TEE_ERR_CANCEL response on second time load. Avoid printing warn
message for it.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Instead of using state->fb->obj[0] directly, get object from framebuffer
by calling drm_gem_fb_get_obj() and return error code when object is
null to avoid using null object of framebuffer.
Reported-by: Fusheng Huang <fusheng.huang@ecarxgroup.com>
Signed-off-by: Julia Zhang <Julia.Zhang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
[WHY]
New register field added in DP2.1 SCR, needed for auxless ALPM
[HOW]
Echo value read from 0xF0007 back to sink
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Cache the PCI state before bus master is disabled. The saved state is
later used for other cases like restoring config space after mode-2
reset.
Fixes: 5c03e5843e6b ("drm/amdgpu:add smu mode1/2 support for aldebaran")
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
v3.x changed the how vram width was encoded. The previous
implementation actually worked correctly for most boards.
Fix the implementation to work correctly everywhere.
This fixes the vram width reported in the kernel log on
some boards.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
[Why]
SMU firmware has not supported MALL PG.
[How]
Disable MALL PG and make it always on until SMU firmware is ready.
Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Switch from VMWARE_HYPERCALL macro to vmware_hypercall API. Eliminate arch
specific code.
drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h: implement arm64 variant
of vmware_hypercall. And keep it here until introduction of ARM64
VMWare hypervisor interface.
Signed-off-by: Alexey Makhalov <alexey.makhalov@broadcom.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240613191650.9913-5-alexey.makhalov@broadcom.com
|
|
The frame event callback is always set to dpu_crtc_frame_event_cb() (or
to NULL) and the data is always either the CRTC itself or NULL
(correpondingly). Thus drop the event callback registration, call the
dpu_crtc_frame_event_cb() directly and gate on the dpu_enc->crtc
assigned using dpu_encoder_assign_crtc().
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/600751/
Link: https://lore.kernel.org/r/20240625-dpu-no-crtc-register-v3-1-1b161df13776@linaro.org
|
|
If CONFIG_MODVERSIONS is enabled, then using the HDMI Connector
framework can result in build failures. Rename the function to make it
fit into the name requirements.
ERROR: modpost: too long symbol "drm_atomic_helper_connector_hdmi_disable_audio_infoframe" [drivers/gpu/drm/msm/msm.ko]
Reported-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624-hdmi-connector-shorten-name-v1-1-5bd3410138db@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/ttm/tests/ttm_device_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/ttm/tests/ttm_pool_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/ttm/tests/ttm_resource_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/ttm/tests/ttm_tt_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/ttm/tests/ttm_bo_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/ttm/tests/ttm_bo_validate_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/ttm/tests/ttm_mock_manager.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/ttm/tests/ttm_kunit_helpers.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624-md-drivers-gpu-drm-ttm-tests-v2-1-76bb765e19c9@quicinc.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
There are couple of bits in PSR2_CTL which needs to be written in case of
eDP Panel Replay
Bspec: 68920
v2: use boolean instead of assuming eDP Panel Replay mean Early Transport
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619062131.4021196-12-jouni.hogander@intel.com
|
|
Move Early Transport validity check to be performed for Panel Replay as
well and use Early Transport for eDP Panel Replay always.
v2:set crtc_state->enable_psr2_su_region_et directly (not in if block)
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619062131.4021196-11-jouni.hogander@intel.com
|
|
Scanline indication needs to be checked and configure for both PSR2 and
Panel Replay Selective Update. Move this check to
intel_sel_update_config_valid.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619062131.4021196-10-jouni.hogander@intel.com
|
|
eDP1.5 support ALPM with Panel Replay as well. We need to check ALPM
related things for Panel Replay as well.
Bspec: 68920
v5:
- instead of using crtc_state->has_panel_replay provide aux_less flag
v4:
- do not move _compute_psr2_sdp_prior_scanline_indication
- move ALPM related checks to separate function
v3: move vblank check as well
v2: do not move Vblank >= PSR2_CTL Block Count Number maximum line count
check
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619062131.4021196-9-jouni.hogander@intel.com
|
|
Intel_alpm_compute_params doesn't change crtc_state. Let's convert it as
const.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619062131.4021196-8-jouni.hogander@intel.com
|
|
Take into account in Panel Replay compute config that HW will not allow PR
on eDP when HDCP enabled.
v2: add debug message to print out why Panel Replay is not possible
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619062131.4021196-7-jouni.hogander@intel.com
|
|
Take into account that 128b/132b Panel Replay is not supported on eDP.
Bspec: 68920
v2:
- make crtc_state as const
- add debug message to print out why Panel Replay is not possible
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619062131.4021196-6-jouni.hogander@intel.com
|
|
Our HW doesn't support panel replay without Early Transport on eDP.
Bspec: 68920
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619062131.4021196-5-jouni.hogander@intel.com
|
|
eDP1.5 allows Panel Replay on eDP as well. Take this into account when
enabling sink PSR/Panel Replay. Write also PANEL_REPLAY_CONFIG2 register
accordingly.
v3:
- set DP_PANEL_REPLAY_CRC_VERIFICATION in PANEL_REPLAY_CONFIG2
- PANEL_REPLAY_CONFIG2 is available in DP2.1 as well
v2: do not configure ALPM for DP2.0 Panel Replay
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619062131.4021196-4-jouni.hogander@intel.com
|
|
Display version >= 20 support eDP 1.5. Inform Panel Replay source support
on eDP for display version >= 20.
Bspec: 68920
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619062131.4021196-3-jouni.hogander@intel.com
|
|
Our HW doesn't support Panel Replay without AUX_LESS ALPM on eDP. Check
panel support for this and prevent eDP panel replay if it doesn't exits.
Bspec: 68920
v3: remove excessive parens
v2: use intel_alpm_aux_less_wake_supported
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619062131.4021196-2-jouni.hogander@intel.com
|
|
Add phy configuration for 28nm dsi phy found on MSM8937 SoC. Only
difference from existing msm8916 configuration is number of phy
and io_start addresses.
Signed-off-by: Daniil Titov <daniilt971@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Barnabás Czémán <trabarni@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/600518/
Link: https://lore.kernel.org/r/20240623-dsi-v2-4-a0ca70fb4846@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Add the mdp5_cfg_hw entry for MDP5 version v1.14 found on msm8937.
Signed-off-by: Daniil Titov <daniilt971@gmail.com>
Signed-off-by: Barnabás Czémán <trabarni@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/600513/
Link: https://lore.kernel.org/r/20240623-dsi-v2-2-a0ca70fb4846@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Remove MDP_CAP_SRC_SPLIT from msm8x53_config because
it is not referenced in downstream.
Fixes: fb25d4474fa0 ("drm/msm/mdp5: Add configuration for MDP v1.16")
Signed-off-by: Barnabás Czémán <trabarni@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/600521/
Link: https://lore.kernel.org/r/20240624-msm8953-mdp-fix-v1-1-be4d3262ebe3@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Prefer the struct drm_edid based functions for reading the EDID and
updating the connector.
Simplify the flow by updating the EDID property when the EDID is read
instead of at .get_modes.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/593976/
Link: https://lore.kernel.org/r/93d6c446ed4831dadfb4a77635a67cf5f27e19ff.1715691257.git.jani.nikula@intel.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
CTLs on older qualcomm SOCs like msm8953 and msm8996 has not got interrupts,
so better to skip CTL irq callback register/unregister
make dpu_ctl_cfg be able to define without intr_start.
Signed-off-by: Barnabás Czémán <trabarni@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/596854/
Link: https://lore.kernel.org/r/20240509-ctl_irq-v1-1-9433f2da9dc7@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Rename dpu_hw_setup_vsync_source functions to make the names match the
implementation: on DPU 5.x the TOP only contains timer setup, while 3.x
and 4.x used MDP_VSYNC_SEL register to select TE source.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/598745/
Link: https://lore.kernel.org/r/20240613-dpu-handle-te-signal-v2-8-67a0116b5366@linaro.org
|
|
Make the DPU driver use the TE source specified in the DT. If none is
specified, the driver defaults to the first GPIO (mdp_vsync_p).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/598733/
Link: https://lore.kernel.org/r/20240613-dpu-handle-te-signal-v2-7-67a0116b5366@linaro.org
|
|
Allow board's device tree to specify the vsync source (aka TE source).
If the property is omitted, the display controller driver will use the
default setting.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
[DB: fixed clearing of return value if there is no TE property]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/598740/
Link: https://lore.kernel.org/r/20240613-dpu-handle-te-signal-v2-6-67a0116b5366@linaro.org
|
|
The struct msm_display_info has is_te_using_watchdog_timer field which
is neither set anywhere nor is flexible enough to specify different
sources. Replace it with the field specifying the vsync source using
enum dpu_vsync_source.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/598738/
Link: https://lore.kernel.org/r/20240613-dpu-handle-te-signal-v2-5-67a0116b5366@linaro.org
|
|
Setting vsync source makes sense only for DSI CMD panels. Pull the
is_cmd_mode condition out of the function into the calling code, so that
it becomes more explicit.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/598736/
Link: https://lore.kernel.org/r/20240613-dpu-handle-te-signal-v2-4-67a0116b5366@linaro.org
|
|
Neither disp-enable-gpios nor disp-te-gpios are defined in the schema.
None of the board DT files use those GPIO pins. Drop them from the
driver.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/598734/
Link: https://lore.kernel.org/r/20240613-dpu-handle-te-signal-v2-3-67a0116b5366@linaro.org
|
|
Add enum dpu_vsync_source instead of a series of defines. Use this enum
to pass vsync information.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/598743/
Link: https://lore.kernel.org/r/20240613-dpu-handle-te-signal-v2-2-67a0116b5366@linaro.org
|
|
In case of legacy cursor update, the cursor VMA needs to be unpinned
only after vblank. This exceeds the lifetime of the whole atomic commit.
Any trick I attempted to keep the atomic commit alive didn't work, as
drm_atomic_helper_setup_commit() force throttles on any old commit that
wasn't cleaned up.
The only option remaining is to remove the plane from the atomic commit,
and use the same path as the legacy cursor update to clean the state
after vblank.
Changes since previous version:
- Call the memset for plane state immediately when scheduling vblank,
this prevents a use-after-free in cursor cleanup.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240522053341.137592-4-maarten.lankhorst@linux.intel.com
|
|
The cursor hardware only does sync updates, and thus the hardware
will be scanning out from the old fb until the next start of vblank.
So in order to make the legacy cursor fastpath actually safe we
should not unpin the old fb until we're sure the hardware has
ceased accessing it. The simplest approach is to just use a vblank
work here to do the delayed unpin.
Not 100% sure it's a good idea to put this onto the same high
priority vblank worker as eg. our timing critical gamma updates.
But let's keep it simple for now, and it we later discover that
this is causing problems we can think about adding a lower
priority worker for such things.
This patch is slightly reworked by Maarten
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240522053341.137592-3-maarten.lankhorst@linux.intel.com
|
|
In some cases we want to flush all vblank work, right before vblank_off
for example. Add a simple function to make this possible.
Check that both pending_work and running work are empty when flushing.
Co-Developed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240522053341.137592-2-maarten.lankhorst@linux.intel.com
|
|
I don't think the display hardware really has such chroma
plane tile row alignment requirements as outlined in
commit d156135e6a54 ("drm/i915/tgl: Make sure a semiplanar
UV plane is tile row size aligned")
Bspec had the same exact thing to say about earlier hardware
as well, but we never cared and things work just fine.
The one thing mentioned in that commit that is definitely
true however is the fence alignment issue. But we don't
deal with that on earlier hardware either. We do have code
to deal with that issue for the first color plane, but not
the chroma planes. So I think if we did want to check this
more extensively we should do it in the same places where
we already check the first color plane (namely
convert_plane_offset_to_xy() and intel_fb_bo_framebuffer_init()).
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240612204712.31404-10-ville.syrjala@linux.intel.com
|
|
Currently we still use the SKL+ PLANE_SURF alignment even
for TGL+ even though the hardware no longer needs it.
Introduce a separate tgl_plane_min_alignment() and update
it to more accurately reflect the hardware requirements.
v2: Don't screw up DPT+semiplanar 2MiB alignment
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240612204712.31404-9-ville.syrjala@linux.intel.com
|
|
Now that all pre-skl platforms have their own .min_alignment()
functions the remainder of intel_surf_alignment() can be hoisted
into skl_univerals_plane.c (and renamed appropriately).
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240612204712.31404-8-ville.syrjala@linux.intel.com
|
|
Extract the necessary chunks from intel_surf_alignment()
into per-platform variants for all pre-skl primary/sprite
planes.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240612204712.31404-7-ville.syrjala@linux.intel.com
|
|
Split intel_cursor_alignment() into per-platform variants.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240612204712.31404-6-ville.syrjala@linux.intel.com
|
|
Different planes could have different alignment requirements
even for the same format/modifier. Collect the alignment
requirements across all planes capable of scanning out the
fb such that the alignment is satisfactory to all those
planes.
So far this was sort of handled by making sure intel_surf_alignment()
declares the superset of all planes' alignment requirements,
but maintaining that manually is annoying. So we're going to move
towards each plane declaring only its own requirements, and thus
we need code to generate the superset.
v2: Drop the borked per-plane vma optimization (Imre)
Assert that the plane's declared alignment is POT (Imre)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240612204712.31404-5-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
|