summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2025-01-24drm/i915/scaler: Refactor max_scale computationMitul Golani
Refactor max scaling factor computation into a reusable function for scalers. --v2: - Add missing comment. [Ankit] Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250120172209.188488-4-mitulkumar.ajitkumar.golani@intel.com
2025-01-24drm/i915/scaler: Use crtc_state to setup plane or pipe scalerMitul Golani
Pass crtc_state to intel_atomic_setup_scaler, this will help to check if pch_pfit enabled or not and also will be useful to pass scaler_state with the same which will be used later to store hscale and vscale values. -- v2: - Fix typos. (Ankit) Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250120172209.188488-3-mitulkumar.ajitkumar.golani@intel.com
2025-01-24drm/i915/scaler: Add and compute scaling factorsMitul Golani
Add scaling factors to scaler_state for a particular scaler user. These factors will be used later to compute scaler prefill latency. Currently, only plane scaling factors are stored, but the same members can later be extended to store pipe scaling factors as well. --v2: - Rephrase commit message. [Ankit] - Corrects typos. [Ankit] Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250120172209.188488-2-mitulkumar.ajitkumar.golani@intel.com
2025-01-23drm/xe/oa: Set stream->pollin in xe_oa_buffer_check_unlockedAshutosh Dixit
We rely on stream->pollin to decide whether or not to block during poll/read calls. However, currently there are blocking read code paths which don't even set stream->pollin. The best place to consistently set stream->pollin for all code paths is therefore to set it in xe_oa_buffer_check_unlocked. Fixes: e936f885f1e9 ("drm/xe/oa/uapi: Expose OA stream fd") Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250115222029.3002103-1-ashutosh.dixit@intel.com
2025-01-23drm/v3d: Assign job pointer to NULL before signaling the fenceMaíra Canal
In commit e4b5ccd392b9 ("drm/v3d: Ensure job pointer is set to NULL after job completion"), we introduced a change to assign the job pointer to NULL after completing a job, indicating job completion. However, this approach created a race condition between the DRM scheduler workqueue and the IRQ execution thread. As soon as the fence is signaled in the IRQ execution thread, a new job starts to be executed. This results in a race condition where the IRQ execution thread sets the job pointer to NULL simultaneously as the `run_job()` function assigns a new job to the pointer. This race condition can lead to a NULL pointer dereference if the IRQ execution thread sets the job pointer to NULL after `run_job()` assigns it to the new job. When the new job completes and the GPU emits an interrupt, `v3d_irq()` is triggered, potentially causing a crash. [ 466.310099] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000c0 [ 466.318928] Mem abort info: [ 466.321723] ESR = 0x0000000096000005 [ 466.325479] EC = 0x25: DABT (current EL), IL = 32 bits [ 466.330807] SET = 0, FnV = 0 [ 466.333864] EA = 0, S1PTW = 0 [ 466.337010] FSC = 0x05: level 1 translation fault [ 466.341900] Data abort info: [ 466.344783] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 466.350285] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 466.355350] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 466.360677] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000089772000 [ 466.367140] [00000000000000c0] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 466.375875] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 466.382163] Modules linked in: rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device algif_hash algif_skcipher af_alg bnep binfmt_misc vc4 snd_soc_hdmi_codec drm_display_helper cec brcmfmac_wcc spidev rpivid_hevc(C) drm_client_lib brcmfmac hci_uart drm_dma_helper pisp_be btbcm brcmutil snd_soc_core aes_ce_blk v4l2_mem2mem bluetooth aes_ce_cipher snd_compress videobuf2_dma_contig ghash_ce cfg80211 gf128mul snd_pcm_dmaengine videobuf2_memops ecdh_generic sha2_ce ecc videobuf2_v4l2 snd_pcm v3d sha256_arm64 rfkill videodev snd_timer sha1_ce libaes gpu_sched snd videobuf2_common sha1_generic drm_shmem_helper mc rp1_pio drm_kms_helper raspberrypi_hwmon spi_bcm2835 gpio_keys i2c_brcmstb rp1 raspberrypi_gpiomem rp1_mailbox rp1_adc nvmem_rmem uio_pdrv_genirq uio i2c_dev drm ledtrig_pattern drm_panel_orientation_quirks backlight fuse dm_mod ip_tables x_tables ipv6 [ 466.458429] CPU: 0 UID: 1000 PID: 2008 Comm: chromium Tainted: G C 6.13.0-v8+ #18 [ 466.467336] Tainted: [C]=CRAP [ 466.470306] Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT) [ 466.476157] pstate: 404000c9 (nZcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 466.483143] pc : v3d_irq+0x118/0x2e0 [v3d] [ 466.487258] lr : __handle_irq_event_percpu+0x60/0x228 [ 466.492327] sp : ffffffc080003ea0 [ 466.495646] x29: ffffffc080003ea0 x28: ffffff80c0c94200 x27: 0000000000000000 [ 466.502807] x26: ffffffd08dd81d7b x25: ffffff80c0c94200 x24: ffffff8003bdc200 [ 466.509969] x23: 0000000000000001 x22: 00000000000000a7 x21: 0000000000000000 [ 466.517130] x20: ffffff8041bb0000 x19: 0000000000000001 x18: 0000000000000000 [ 466.524291] x17: ffffffafadfb0000 x16: ffffffc080000000 x15: 0000000000000000 [ 466.531452] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 466.538613] x11: 0000000000000000 x10: 0000000000000000 x9 : ffffffd08c527eb0 [ 466.545777] x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 [ 466.552941] x5 : ffffffd08c4100d0 x4 : ffffffafadfb0000 x3 : ffffffc080003f70 [ 466.560102] x2 : ffffffc0829e8058 x1 : 0000000000000001 x0 : 0000000000000000 [ 466.567263] Call trace: [ 466.569711] v3d_irq+0x118/0x2e0 [v3d] (P) [ 466.573826] __handle_irq_event_percpu+0x60/0x228 [ 466.578546] handle_irq_event+0x54/0xb8 [ 466.582391] handle_fasteoi_irq+0xac/0x240 [ 466.586498] generic_handle_domain_irq+0x34/0x58 [ 466.591128] gic_handle_irq+0x48/0xd8 [ 466.594798] call_on_irq_stack+0x24/0x58 [ 466.598730] do_interrupt_handler+0x88/0x98 [ 466.602923] el0_interrupt+0x44/0xc0 [ 466.606508] __el0_irq_handler_common+0x18/0x28 [ 466.611050] el0t_64_irq_handler+0x10/0x20 [ 466.615156] el0t_64_irq+0x198/0x1a0 [ 466.618740] Code: 52800035 3607faf3 f9442e80 52800021 (f9406018) [ 466.624853] ---[ end trace 0000000000000000 ]--- [ 466.629483] Kernel panic - not syncing: Oops: Fatal exception in interrupt [ 466.636384] SMP: stopping secondary CPUs [ 466.640320] Kernel Offset: 0x100c400000 from 0xffffffc080000000 [ 466.646259] PHYS_OFFSET: 0x0 [ 466.649141] CPU features: 0x100,00000170,00901250,0200720b [ 466.654644] Memory Limit: none [ 466.657706] ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]--- Fix the crash by assigning the job pointer to NULL before signaling the fence. This ensures that the job pointer is cleared before any new job starts execution, preventing the race condition and the NULL pointer dereference crash. Cc: stable@vger.kernel.org Fixes: e4b5ccd392b9 ("drm/v3d: Ensure job pointer is set to NULL after job completion") Signed-off-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com> Reviewed-by: Iago Toral Quiroga <itoral@igalia.com> Tested-by: Phil Elwell <phil@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250123012403.20447-1-mcanal@igalia.com
2025-01-23drm/panel-edp: Add STA 116QHD024002Langyan Ye
Add support for the STA 116QHD024002, pleace the EDID here for subsequent reference. 00 ff ff ff ff ff ff 00 4e 81 09 00 00 00 00 00 26 21 01 04 a5 1a 0e 78 02 1e b5 9a 5f 57 94 26 0f 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 8e 1c 56 a0 50 00 1e 30 28 20 55 00 00 90 10 00 00 18 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe 00 20 20 20 20 20 20 0a 20 20 20 20 20 20 00 00 00 fe 00 31 31 36 51 48 44 30 32 34 30 30 32 0a 00 3b Signed-off-by: Langyan Ye <yelangyan@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250123112055.1521471-1-yelangyan@huaqin.corp-partner.google.com
2025-01-23Merge remote-tracking branch 'drm/drm-next' into drm-misc-next-fixesMaarten Lankhorst
A regression was caused by commit e4b5ccd392b9 ("drm/v3d: Ensure job pointer is set to NULL after job completion"), but this commit is not yet in next-fixes, fast-forward it. Try #2, first one didn't have v6.13 in it. Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
2025-01-23Merge v6.13 into drm-nextSimona Vetter
A regression was caused by commit e4b5ccd392b9 ("drm/v3d: Ensure job pointer is set to NULL after job completion"), but this commit is not yet in next-fixes, fast-forward it. Note that this recreates Linus merge in 96c84703f1cf ("Merge tag 'drm-next-2025-01-17' of https://gitlab.freedesktop.org/drm/kernel") because I didn't want to backmerge a random point in the merge window. Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
2025-01-23drm/atomic-helper: document drm_atomic_helper_check() restrictionsDmitry Baryshkov
The drm_atomic_helper_check() calls drm_atomic_helper_check_modeset() insternally. Document that corresponding restrictions also apply to the drivers that call the former function (as it's easy to miss the documentation for the latter function). Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241222-drm-dirty-modeset-v1-1-0e76a53eceb9@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-01-23drm/bridge: adv7511: Switch to atomic operationsJesse Van Gavere
Use the atomic version of enable/disable. To support bridges where bus format negotiation is needed such as TIDSS we need to implement atomic_get_input_bus_fmts, prepare the driver for this by switching the existing operations to it's atomic variants. Signed-off-by: Jesse Van Gavere <jesseevg@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250106121054.96739-1-jesseevg@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-01-23drm/i915: fix typos in drm/i915 filesNitin Gote
Fix all typos in files under drm/i915 reported by codespell tool. v2: Fix commenting style. <Andi> v3: "in case" should be capitalized and fix comment style. <Krzysztof Niemiec> Signed-off-by: Nitin Gote <nitin.r.gote@intel.com> Reviewed-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250120081517.3237326-9-nitin.r.gote@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-01-23drm/i915/display: fix typos in i915/display filesNitin Gote
Fix all typos in files under drm/i915/display reported by codespell tool. v2: - Include british and american spelling, as those are not typos. - Fix commenting style. <Jani> v3: Fix "In case" wrongly capitalized and also fix comment style. <Krzysztof Niemiec> Signed-off-by: Nitin Gote <nitin.r.gote@intel.com> Reviewed-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250120081517.3237326-8-nitin.r.gote@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-01-23drm/i915/soc: fix typos in i915/soc filesNitin Gote
Fix all typos in files under drm/i915/soc reported by codespell tool. Signed-off-by: Nitin Gote <nitin.r.gote@intel.com> Reviewed-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250120081517.3237326-7-nitin.r.gote@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-01-23drm/i915/selftests: fix typos in i915/selftests filesNitin Gote
Fix all typos in files under drm/i915/selftests reported by codespell tool. v2: Fix commenting style <Andi> Signed-off-by: Nitin Gote <nitin.r.gote@intel.com> Reviewed-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250120081517.3237326-6-nitin.r.gote@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-01-23drm/i915/pxp: fix typos in i915/pxp filesNitin Gote
Fix all typos in files under drm/i915/pxp reported by codespell tool. Signed-off-by: Nitin Gote <nitin.r.gote@intel.com> Reviewed-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250120081517.3237326-5-nitin.r.gote@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-01-23drm/i915/gem: fix typos in i915/gem filesNitin Gote
Fix all typos in files under drm/i915/gem reported by codespell tool. v2: Codespell won't catch it, but it should be "user defined" and not "use defined". <Krzysztof Niemiec> Signed-off-by: Nitin Gote <nitin.r.gote@intel.com> Reviewed-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250120081517.3237326-4-nitin.r.gote@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-01-23drm/i915/gvt: fix typos in i915/gvt filesNitin Gote
Fix all typos in files under drm/i915/gvt reported by codespell tool. v2: Correct comment styling. <Krzysztof Niemiec> Signed-off-by: Nitin Gote <nitin.r.gote@intel.com> Reviewed-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250120081517.3237326-3-nitin.r.gote@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-01-23drm/i915/gt: fix typos in i915/gt files.Nitin Gote
Fix all typos in files under drm/i915/gt reported by codespell tool. v2: Fix grammar mistake in comment. <Andi> v3: Correct typo in commit log. <Krzysztof Niemiec> Signed-off-by: Nitin Gote <nitin.r.gote@intel.com> Reviewed-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250120081517.3237326-2-nitin.r.gote@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-01-23drm/bochs: Do not put DRM device in PCI remove callbackThomas Zimmermann
Removing the bochs PCI device should mark the DRM device as unplugged without removing it. Hence clear the respective call to drm_dev_put() from bochs_pci_remove(). Fixes a double unref in devm_drm_dev_init_release(). An example error message is shown below: [ 32.958338] BUG: KASAN: use-after-free in drm_dev_put.part.0+0x1b/0x90 [ 32.958850] Write of size 4 at addr ffff888152134004 by task (udev-worker)/591 [ 32.959574] CPU: 3 UID: 0 PID: 591 Comm: (udev-worker) Tainted: G E 6.13.0-rc2-1-default+ #3417 [ 32.960316] Tainted: [E]=UNSIGNED_MODULE [ 32.960637] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-2-gc13ff2cd-prebuilt.qemu.org 04/01/2014 [ 32.961429] Call Trace: [ 32.961433] <TASK> [ 32.961439] dump_stack_lvl+0x68/0x90 [ 32.961452] print_address_description.constprop.0+0x88/0x330 [ 32.961461] ? preempt_count_sub+0x14/0xc0 [ 32.961473] print_report+0xe2/0x1d0 [ 32.961479] ? srso_alias_return_thunk+0x5/0xfbef5 [ 32.963725] ? __virt_addr_valid+0x143/0x320 [ 32.964077] ? srso_alias_return_thunk+0x5/0xfbef5 [ 32.964463] ? drm_dev_put.part.0+0x1b/0x90 [ 32.964817] kasan_report+0xce/0x1a0 [ 32.965123] ? drm_dev_put.part.0+0x1b/0x90 [ 32.965474] kasan_check_range+0xff/0x1c0 [ 32.965806] drm_dev_put.part.0+0x1b/0x90 [ 32.966138] release_nodes+0x84/0xc0 [ 32.966447] devres_release_all+0xd2/0x110 [ 32.966788] ? __pfx_devres_release_all+0x10/0x10 [ 32.967177] ? preempt_count_sub+0x14/0xc0 [ 32.967523] device_unbind_cleanup+0x16/0xc0 [ 32.967886] really_probe+0x1b7/0x570 [ 32.968207] __driver_probe_device+0xca/0x1b0 [ 32.968568] driver_probe_device+0x4a/0xf0 [ 32.968907] __driver_attach+0x10b/0x290 [ 32.969239] ? __pfx___driver_attach+0x10/0x10 [ 32.969598] bus_for_each_dev+0xc0/0x110 [ 32.969923] ? __pfx_bus_for_each_dev+0x10/0x10 [ 32.970291] ? bus_add_driver+0x17a/0x2b0 [ 32.970622] ? srso_alias_return_thunk+0x5/0xfbef5 [ 32.971011] bus_add_driver+0x19a/0x2b0 [ 32.971335] driver_register+0xd8/0x160 [ 32.971671] ? __pfx_bochs_pci_driver_init+0x10/0x10 [bochs] [ 32.972130] do_one_initcall+0xba/0x390 [...] After unplugging the DRM device, clients will close their references. Closing the final reference will also release the DRM device. Reported-by: Dr. David Alan Gilbert <dave@treblig.org> Closes: https://lore.kernel.org/lkml/Z18dbfDAiFadsSdg@gallifrey/ Fixes: 04826f588682 ("drm/bochs: Allocate DRM device in struct bochs_device") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: virtualization@lists.linux.dev Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250103095615.231162-1-tzimmermann@suse.de
2025-01-23drm/i915/cx0_phy: Use HDMI PLL algorithm for C10 PHYAnkit Nautiyal
Try HDMI PLL alogorithm for C10 PHY, if there are no pre-computed tables. Also get rid of the helpers to get rate for HDMI for C10/20 PHY, as we no longer depend only on pre-computed tables. Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250120042122.1029481-6-ankit.k.nautiyal@intel.com
2025-01-23drm/i915/intel_snps_hdmi_pll: Compute C10 HDMI PLLs with algorithmAnkit Nautiyal
Add support for computing C10 HDMI PLLS using the HDMI PLL algorithm. v2: Fix styling issues. (Jani) v3: Rename function to align with filename. (Jani) v4: Add Bspec reference. (Suraj) Bspec: 74166 Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250120042122.1029481-5-ankit.k.nautiyal@intel.com
2025-01-23drm/i915/cx0_phy_regs: Add C10 registers bitsAnkit Nautiyal
Add C10 register bits to be used for computing HDMI PLLs with algorithm. v2: Add bspec reference. (Suraj) v3: Use REG_BIT8 like other reg bits/masks. (Jani) Bspec: 74166 Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250122162850.1861410-1-ankit.k.nautiyal@intel.com
2025-01-23drm/i915/snps_phy: Use HDMI PLL algorithm for DG2Ankit Nautiyal
Try SNPS_PHY HDMI alogorithm, if there are no pre-computed tables. Also get rid of the helper to get rate for HDMI snps phy, as we no longer depend only on pre-computed tables. v2: -Prefer pre-computed tables over computed values from algorithm. (Jani) Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250120042122.1029481-3-ankit.k.nautiyal@intel.com
2025-01-23drm/i915/display: Add support for SNPS PHY HDMI PLL algorithm for DG2Ankit Nautiyal
Add helpers to calculate the necessary parameters for configuring the HDMI PLL for SNPS MPLLB and C10 PHY. The pll parameters are computed for desired pixel clock, curve data and other inputs used for interpolation and finally stored in the pll_state. Currently the helper is used to compute PLLs for DG2 SNPS PHY. Support for computing Plls for C10 PHY is added in subsequent patches. v2: -Used kernel types instead of C99 types. (Jani) -Fixed styling issues and renamed few variables to more meaningful names. (Jani) -Added Xe make file changes. (Jani) -Fixed build errors reported by kernel test robot v3: -Renamed helper to align with file name. (Jani) v4: -Removed erroraneous comment, and added Bspec# as part of trailer. (Suraj) -Fixed warning flagged by kernel test robot. Bspec: 54032 Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250120042122.1029481-2-ankit.k.nautiyal@intel.com
2025-01-22drm/xe/ptl: Apply Wa_13011645652Vinay Belgaumkar
Extend Wa_13011645652 to PTL. Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by: Stuart Summers <stuart.summers@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250116184659.384874-1-vinay.belgaumkar@intel.com
2025-01-22drm/i915/dp_mst: Use intel_display::platform.alderlake_p instead of ↵Imre Deak
IS_ALDERLAKE_P() Use the driver's standard intel_display::platform.alderlake_p instead of IS_ALDERLAKE_P(). Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250108151916.491113-6-imre.deak@intel.com
2025-01-22drm/i915/dp_mst: Simplify getting a drm_device pointer needed by to_i915()Imre Deak
Simplify getting a drm_device pointer when using to_i915() in intel_dp_mst.c from the already available intel_display object, instead of getting it from a DRM KMS object. While at it rename dev_priv to i915, following the driver's standard terminology. Suggested-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250108151916.491113-5-imre.deak@intel.com
2025-01-22drm/i915/dp_mst: Simplify using to_intel_display() passing it an ↵Imre Deak
intel_connector pointer Simplify the use of to_intel_display() in intel_dp_mst.c passing it the already available intel_connector pointer, instead of looking up a drm_device pointer for the same purpose. Suggested-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250108151916.491113-4-imre.deak@intel.com
2025-01-22drm/i915/dp_mst: Use intel_connector vs. drm_connector pointer in intel_dp_mst.cImre Deak
Follow the canonical way in intel_dp_mst.c, referencing a connector only via a struct intel_connector pointer and naming this pointer 'connector' instead of 'intel_connector', the only exception being the casting of a drm_connector function parameter pointer to intel_connector, calling the drm_connector pointer _connector. Suggested-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250108151916.491113-3-imre.deak@intel.com
2025-01-22drm/i915/dp_mst: Fix error handling while adding a connectorImre Deak
After an error during adding an MST connector the MST port and the intel_connector object could be leaked, fix this up. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250108151916.491113-2-imre.deak@intel.com
2025-01-22drm/ast: Only warn about unsupported TX chips on Gen4 and laterThomas Zimmermann
Only Gen4 and later read the installed TX chip from the SoC. So only warn on those generations about unsupported chips. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250117103450.28692-9-tzimmermann@suse.de
2025-01-22drm/ast: Merge TX-chip detection code for Gen4 and laterThomas Zimmermann
Gens 4 to 6 and Gen7 use the same pattern for detecting the installed TX chips. Merge the code into a single branch. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250117103450.28692-8-tzimmermann@suse.de
2025-01-22drm/ast: Align Gen1 DVO detection to register manualThomas Zimmermann
Align variable names and register constants for TX-chip detection to the names in the register manual. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250117103450.28692-7-tzimmermann@suse.de
2025-01-22drm/ast: Hide Gens 1 to 3 TX detection in branchThomas Zimmermann
Gen7 only supports ASTDP. Gens 4 to 6 support various TX chips, except ASTDP. These boards detect the TX chips by reading the SoC scratch register as VGACRD1. Gens 1 to 3 only support SIL164. These boards read the DVO bit from VGACRA3. Hence move this test behind a branch, so that it does not run on later generations. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250117103450.28692-6-tzimmermann@suse.de
2025-01-22drm/ast: Initialize ASTDP in ast_post_gpu()Thomas Zimmermann
Remove the call to ast_dp_launch() from ast_detect_tx_chip() and perform it unconditionally in ast_post_gpu(). Also add error handling: the detection code apparently used ast_dp_launch() to test for a working ASTDP, falling back to VGA on errors. As the VBIOS reports ASTDP, silently ignoring errors is questionable behavior. With the refactoring, failing to initialize the ASTDP will also fail probing the driver. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250117103450.28692-5-tzimmermann@suse.de
2025-01-22drm/ast: Refactor ast_post_gpu() by GenThomas Zimmermann
Reorganize ast_post_gpu() so that it first branches by Gen and then by config mode and TX chip. This will later make it possible to split up the function by Gen. The helper ast_init_3rdtx() only handles Gen4 and Gen5, so leave it out from the other Gens. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250117103450.28692-4-tzimmermann@suse.de
2025-01-22drm/ast: Detect DRAM before TX-chipThomas Zimmermann
Move DRAM detection before TX-chip detection. Both steps are independent from each other. Detection of the TX-chip is now next to posting those chips, which can be done in a single step. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250117103450.28692-3-tzimmermann@suse.de
2025-01-22drm/ast: Detect wide-screen support before creating modeset pipelineThomas Zimmermann
Wide-screen support is relevant for mode validation. Do not detect it before setting up the mode-setting pipeline. Gets the function call out of the way of other initialization code. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250117103450.28692-2-tzimmermann@suse.de
2025-01-22drm: select DRM_KMS_HELPER from DRM_GEM_SHMEM_HELPERArnd Bergmann
In the combination of DRM_KMS_HELPER=m, DRM_GEM_SHMEM_HELPER=y, DRM_FBDEV_EMULATION=y, The shmem code fails to link against the KMS helpers: x86_64-linux-ld: vmlinux.o: in function `drm_fbdev_shmem_driver_fbdev_probe': (.text+0xeec601): undefined reference to `drm_fb_helper_alloc_info' x86_64-linux-ld: (.text+0xeec633): undefined reference to `drm_fb_helper_fill_info' x86_64-linux-ld: vmlinux.o: in function `drm_fbdev_shmem_get_page': drm_fbdev_shmem.c:(.text+0xeec7d2): undefined reference to `drm_gem_fb_get_obj' x86_64-linux-ld: vmlinux.o: in function `drm_fbdev_shmem_fb_mmap': drm_fbdev_shmem.c:(.text+0xeec9f6): undefined reference to `drm_gem_fb_get_obj' x86_64-linux-ld: vmlinux.o: in function `drm_fbdev_shmem_defio_imageblit': (.rodata+0x5b2288): undefined reference to `drm_fb_helper_check_var' x86_64-linux-ld: (.rodata+0x5b2290): undefined reference to `drm_fb_helper_set_par' This can happen for a number of device drivers that select DRM_GEM_SHMEM_HELPER without also selecting DRM_KMS_HELPER. To work around this, add another select that forces DRM_KMS_HELPER to be built-in rather than a loadable module, but only if FBDEV emulation is also enabled. DRM_TTM_HELPER and DRM_GEM_DMA_HELPER look like they have the same problem in theory even if there is no possible configuration that shows it. For consistency, do the same change to those. Closes: https://lore.kernel.org/all/20250121-greedy-flounder-of-abundance-4d2ee8-mkl@pengutronix.de Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Tested-by: Marc Kleine-Budde <mkl@pengutronix.de> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20250122090211.3161186-1-arnd@kernel.org
2025-01-22drm/i915/dp: Correct max compressed bpp bounds by using link bppAnkit Nautiyal
While setting the bounds for compressed bpp, we ensure that the compressed bpp is less than the pipe bpp. This causes an issue with the 420 output format, where the effective link bpp (or output bpp) is half that of the pipe bpp. Therefore instead of using pipe bpp, use the output bpp to set the bounds for the compressed bpp. v2: Use identifier output_bpp instead of link_bpp (Imre) Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250117050713.152012-1-ankit.k.nautiyal@intel.com
2025-01-21Merge tag 'rust-6.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux Pull rust updates from Miguel Ojeda: "Toolchain and infrastructure: - Finish the move to custom FFI integer types started in the previous cycle and finally map 'long' to 'isize' and 'char' to 'u8'. Do a few cleanups on top thanks to that. - Start to use 'derive(CoercePointee)' on Rust >= 1.84.0. This is a major milestone on the path to build the kernel using only stable Rust features. In particular, previously we were using the unstable features 'coerce_unsized', 'dispatch_from_dyn' and 'unsize', and now we will use the new 'derive_coerce_pointee' one, which is on track to stabilization. This new feature is a macro that essentially expands into code that internally uses the unstable features that we were using before, without having to expose those. With it, stable Rust users, including the kernel, will be able to build custom smart pointers that work with trait objects, e.g.: fn f(p: &Arc<dyn Display>) { pr_info!("{p}\n"); } let a: Arc<dyn Display> = Arc::new(42i32, GFP_KERNEL)?; let b: Arc<dyn Display> = Arc::new("hello there", GFP_KERNEL)?; f(&a); // Prints "42". f(&b); // Prints "hello there". Together with the 'arbitrary_self_types' feature that we started using in the previous cycle, using our custom smart pointers like 'Arc' will eventually only rely in stable Rust. - Introduce 'PROCMACROLDFLAGS' environment variable to allow to link Rust proc macros using different flags than those used for linking Rust host programs (e.g. when 'rustc' uses a different C library than the host programs' one), which Android needs. - Help kernel builds under macOS with Rust enabled by accomodating other naming conventions for dynamic libraries (i.e. '.so' vs. '.dylib') which are used for Rust procedural macros. The actual support for macOS (i.e. the rest of the pieces needed) is provided out-of-tree by others, following the policy used for other parts of the kernel by Kbuild. - Run Clippy for 'rusttest' code too and clean the bits it spotted. - Provide Clippy with the minimum supported Rust version to improve the suggestions it gives. - Document 'bindgen' 0.71.0 regression. 'kernel' crate: - 'build_error!': move users of the hidden function to the documented macro, prevent such uses in the future by moving the function elsewhere and add the macro to the prelude. - 'types' module: add improved version of 'ForeignOwnable::borrow_mut' (which was removed in the past since it was problematic); change 'ForeignOwnable' pointer type to '*mut'. - 'alloc' module: implement 'Display' for 'Box' and align the 'Debug' implementation to it; add example (doctest) for 'ArrayLayout::new()' - 'sync' module: document 'PhantomData' in 'Arc'; use 'NonNull::new_unchecked' in 'ForeignOwnable for Arc' impl. - 'uaccess' module: accept 'Vec's with different allocators in 'UserSliceReader::read_all'. - 'workqueue' module: enable run-testing a couple more doctests. - 'error' module: simplify 'from_errno()'. - 'block' module: fix formatting in code documentation (a lint to catch these is being implemented). - Avoid 'unwrap()'s in doctests, which also improves the examples by showing how kernel code is supposed to be written. - Avoid 'as' casts with 'cast{,_mut}' calls which are a bit safer. And a few other cleanups" * tag 'rust-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (32 commits) kbuild: rust: add PROCMACROLDFLAGS rust: uaccess: generalize userSliceReader to support any Vec rust: kernel: add improved version of `ForeignOwnable::borrow_mut` rust: kernel: reorder `ForeignOwnable` items rust: kernel: change `ForeignOwnable` pointer to mut rust: arc: split unsafe block, add missing comment rust: types: avoid `as` casts rust: arc: use `NonNull::new_unchecked` rust: use derive(CoercePointee) on rustc >= 1.84.0 rust: alloc: add doctest for `ArrayLayout::new()` rust: init: update `stack_try_pin_init` examples rust: error: import `kernel`'s `LayoutError` instead of `core`'s rust: str: replace unwraps with question mark operators rust: page: remove unnecessary helper function from doctest rust: rbtree: remove unwrap in asserts rust: init: replace unwraps with question mark operators rust: use host dylib naming convention to support macOS rust: add `build_error!` to the prelude rust: kernel: move `build_error` hidden function to prevent mistakes rust: use the `build_error!` macro, not the hidden function ...
2025-01-21Merge tag 'kthread-for-6.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks Pull kthread updates from Frederic Weisbecker: "Kthreads affinity follow either of 4 existing different patterns: 1) Per-CPU kthreads must stay affine to a single CPU and never execute relevant code on any other CPU. This is currently handled by smpboot code which takes care of CPU-hotplug operations. Affinity here is a correctness constraint. 2) Some kthreads _have_ to be affine to a specific set of CPUs and can't run anywhere else. The affinity is set through kthread_bind_mask() and the subsystem takes care by itself to handle CPU-hotplug operations. Affinity here is assumed to be a correctness constraint. 3) Per-node kthreads _prefer_ to be affine to a specific NUMA node. This is not a correctness constraint but merely a preference in terms of memory locality. kswapd and kcompactd both fall into this category. The affinity is set manually like for any other task and CPU-hotplug is supposed to be handled by the relevant subsystem so that the task is properly reaffined whenever a given CPU from the node comes up. Also care should be taken so that the node affinity doesn't cross isolated (nohz_full) cpumask boundaries. 4) Similar to the previous point except kthreads have a _preferred_ affinity different than a node. Both RCU boost kthreads and RCU exp kworkers fall into this category as they refer to "RCU nodes" from a distinctly distributed tree. Currently the preferred affinity patterns (3 and 4) have at least 4 identified users, with more or less success when it comes to handle CPU-hotplug operations and CPU isolation. Each of which do it in its own ad-hoc way. This is an infrastructure proposal to handle this with the following API changes: - kthread_create_on_node() automatically affines the created kthread to its target node unless it has been set as per-cpu or bound with kthread_bind[_mask]() before the first wake-up. - kthread_affine_preferred() is a new function that can be called right after kthread_create_on_node() to specify a preferred affinity different than the specified node. When the preferred affinity can't be applied because the possible targets are offline or isolated (nohz_full), the kthread is affine to the housekeeping CPUs (which means to all online CPUs most of the time or only the non-nohz_full CPUs when nohz_full= is set). kswapd, kcompactd, RCU boost kthreads and RCU exp kworkers have been converted, along with a few old drivers. Summary of the changes: - Consolidate a bunch of ad-hoc implementations of kthread_run_on_cpu() - Introduce task_cpu_fallback_mask() that defines the default last resort affinity of a task to become nohz_full aware - Add some correctness check to ensure kthread_bind() is always called before the first kthread wake up. - Default affine kthread to its preferred node. - Convert kswapd / kcompactd and remove their halfway working ad-hoc affinity implementation - Implement kthreads preferred affinity - Unify kthread worker and kthread API's style - Convert RCU kthreads to the new API and remove the ad-hoc affinity implementation" * tag 'kthread-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks: kthread: modify kernel-doc function name to match code rcu: Use kthread preferred affinity for RCU exp kworkers treewide: Introduce kthread_run_worker[_on_cpu]() kthread: Unify kthread_create_on_cpu() and kthread_create_worker_on_cpu() automatic format rcu: Use kthread preferred affinity for RCU boost kthread: Implement preferred affinity mm: Create/affine kswapd to its preferred node mm: Create/affine kcompactd to its preferred node kthread: Default affine kthread to its preferred NUMA node kthread: Make sure kthread hasn't started while binding it sched,arm64: Handle CPU isolation on last resort fallback rq selection arm64: Exclude nohz_full CPUs from 32bits el0 support lib: test_objpool: Use kthread_run_on_cpu() kallsyms: Use kthread_run_on_cpu() soc/qman: test: Use kthread_run_on_cpu() arm/bL_switcher: Use kthread_run_on_cpu()
2025-01-21Merge tag 'drm-next-2025-01-17' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm updates from Dave Airlie: "There are two external interactions of note, the msm tree pull in some opp tree, hopefully the opp tree arrives from the same git tree however it normally does. There is also a new cgroup controller for device memory, that is used by drm, so is merging through my tree. This will hopefully help open up gpu cgroup usage a bit more and move us forward. There is a new accelerator driver for the AMD XDNA Ryzen AI NPUs. Then the usual xe/amdgpu/i915/msm leaders and lots of changes and refactors across the board: core: - device memory cgroup controller added - Remove driver date from drm_driver - Add drm_printer based hex dumper - drm memory stats docs update - scheduler documentation improvements new driver: - amdxdna - Ryzen AI NPU support connector: - add a mutex to protect ELD - make connector setup two-step panels: - Introduce backlight quirks infrastructure - New panels: KDB KD116N2130B12, Tianma TM070JDHG34-00, - Multi-Inno Technology MI1010Z1T-1CP11 bridge: - ti-sn65dsi83: Add ti,lvds-vod-swing optional properties - Provide default implementation of atomic_check for HDMI bridges - it605: HDCP improvements, MCCS Support xe: - make OA buffer size configurable - GuC capture fixes - add ufence and g2h flushes - restore system memory GGTT mappings - ioctl fixes - SRIOV PF scheduling priority - allow fault injection - lots of improvements/refactors - Enable GuC's WA_DUAL_QUEUE for newer platforms - IRQ related fixes and improvements i915: - More accurate engine busyness metrics with GuC submission - Ensure partial BO segment offset never exceeds allowed max - Flush GuC CT receive tasklet during reset preparation - Some DG2 refactor to fix DG2 bugs when operating with certain CPUs - Fix DG1 power gate sequence - Enabling uncompressed 128b/132b UHBR SST - Handle hdmi connector init failures, and no HDMI/DP cases - More robust engine resets on Haswell and older i915/xe display: - HDCP fixes for Xe3Lpd - New GSC FW ARL-H/ARL-U - support 3 VDSC engines 12 slices - MBUS joining sanitisation - reconcile i915/xe display power mgmt - Xe3Lpd fixes - UHBR rates for Thunderbolt amdgpu: - DRM panic support - track BO memory stats at runtime - Fix max surface handling in DC - Cleaner shader support for gfx10.3 dGPUs - fix drm buddy trim handling - SDMA engine reset updates - Fix doorbell ttm cleanup - RAS updates - ISP updates - SDMA queue reset support - Rework DPM powergating interfaces - Documentation updates and cleanups - DCN 3.5 updates - Use a pm notifier to more gracefully handle VRAM eviction on suspend or hibernate - Add debugfs interfaces for forcing scheduling to specific engine instances - GG 9.5 updates - IH 4.4 updates - Make missing optional firmware less noisy - PSP 13.x updates - SMU 13.x updates - VCN 5.x updates - JPEG 5.x updates - GC 12.x updates - DC FAMS updates amdkfd: - GG 9.5 updates - Logging improvements - Shader debugger fixes - Trap handler cleanup - Cleanup includes - Eviction fence wq fix msm: - MDSS: - properly described UBWC registers - added SM6150 (aka QCS615) support - DPU: - added SM6150 (aka QCS615) support - enabled wide planes if virtual planes are enabled (by using two SSPPs for a single plane) - added CWB hardware blocks support - DSI: - added SM6150 (aka QCS615) support - GPU: - Print GMU core fw version - GMU bandwidth voting for a740 and a750 - Expose uche trap base via uapi - UAPI error reporting rcar-du: - Add r8a779h0 Support ivpu: - Fix qemu crash when using passthrough nouveau: - expose GSP-RM logging buffers via debugfs panfrost: - Add MT8188 Mali-G57 MC3 support rockchip: - Gamma LUT support hisilicon: - new HIBMC support virtio-gpu: - convert to helpers - add prime support for scanout buffers v3d: - Add DRM_IOCTL_V3D_PERFMON_SET_GLOBAL vc4: - Add support for BCM2712 vkms: - line-per-line compositing algorithm to improve performance zynqmp: - Add DP audio support mediatek: - dp: Add sdp path reset - dp: Support flexible length of DP calibration data etnaviv: - add fdinfo memory support - add explicit reset handling" * tag 'drm-next-2025-01-17' of https://gitlab.freedesktop.org/drm/kernel: (1070 commits) drm/bridge: fix documentation for the hdmi_audio_prepare() callback doc/cgroup: Fix title underline length drm/doc: Include new drm-compute documentation cgroup/dmem: Fix parameters documentation cgroup/dmem: Select PAGE_COUNTER kernel/cgroup: Remove the unused variable climit drm/display: hdmi: Do not read EDID on disconnected connectors drm/tests: hdmi: Add connector disablement test drm/connector: hdmi: Do atomic check when necessary drm/amd/display: 3.2.316 drm/amd/display: avoid reset DTBCLK at clock init drm/amd/display: improve dpia pre-train drm/amd/display: Apply DML21 Patches drm/amd/display: Use HW lock mgr for PSR1 drm/amd/display: Revised for Replay Pseudo vblank control drm/amd/display: Add a new flag for replay low hz drm/amd/display: Remove unused read_ono_state function from Hwss module drm/amd/display: Do not elevate mem_type change to full update drm/amd/display: Do not wait for PSR disable on vbl enable drm/amd/display: Remove unnecessary eDP power down ...
2025-01-21drm/i915/backlight: Return immediately when scale() finds invalid parametersGuenter Roeck
The scale() functions detects invalid parameters, but continues its calculations anyway. This causes bad results if negative values are used for unsigned operations. Worst case, a division by 0 error will be seen if source_min == source_max. On top of that, after v6.13, the sequence of WARN_ON() followed by clamp() may result in a build error with gcc 13.x. drivers/gpu/drm/i915/display/intel_backlight.c: In function 'scale': include/linux/compiler_types.h:542:45: error: call to '__compiletime_assert_415' declared with attribute error: clamp() low limit source_min greater than high limit source_max This happens if the compiler decides to rearrange the code as follows. if (source_min > source_max) { WARN(..); /* Do the clamp() knowing that source_min > source_max */ source_val = clamp(source_val, source_min, source_max); } else { /* Do the clamp knowing that source_min <= source_max */ source_val = clamp(source_val, source_min, source_max); } Fix the problem by evaluating the return values from WARN_ON and returning immediately after a warning. While at it, fix divide by zero error seen if source_min == source_max. Analyzed-by: Linus Torvalds <torvalds@linux-foundation.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Suggested-by: David Laight <david.laight.linux@gmail.com> Cc: David Laight <david.laight.linux@gmail.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250121145203.2851237-1-linux@roeck-us.net Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-01-21drm/xe/guc: Fix sizeof(32) typoMichal Wajdeczko
A small typo leads to the following static code checker warning: drivers/gpu/drm/xe/xe_guc_buf.c:81 xe_guc_buf_reserve() warn: sizeof(NUMBER)? Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/intel-xe/0d5bcbf1-79f9-4a10-a221-ddbaec9f6122@stanley.mountain/ Fixes: 696bfdf273ea ("drm/xe/guc: Introduce the GuC Buffer Cache") Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Dan Carpenter <dan.carpenter@linaro.org> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Stuart Summers <stuart.summers@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250121094832.588-1-michal.wajdeczko@intel.com
2025-01-21drm/xe/pf: Fix migration initializationMichal Wajdeczko
The migration support only needs to be initialized once, but it was incorrectly called from the xe_gt_sriov_pf_init_hw(), which is part of the reset flow and may be called multiple times. Fixes: d86e3737c7ab ("drm/xe/pf: Add functions to save and restore VF GuC state") Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250120232443.544-1-michal.wajdeczko@intel.com
2025-01-21drm/i915/pmu: Remove i915_pmu_event_event_idx()Lucas De Marchi
perf event already has a default function that returns 0, no need to override with the same thing. Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250113183329.3138138-1-lucas.demarchi@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-01-21drm/xe/oa: Preserve oa_ctrl unused bitsAshutosh Dixit
UMD's have interest in setting unused bits of the oa_ctrl register "out of band" for certain experiments. To facilitate this, don't clobber previous oa_ctrl unused bits, i.e. rmw the values rather than simply write them. Fixes: e936f885f1e9 ("drm/xe/oa/uapi: Expose OA stream fd") Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250117032155.3048063-1-ashutosh.dixit@intel.com
2025-01-21drm/i915/dsb: Allow DSB to perform commits when VRR is enabledVille Syrjälä
Now that we know how to issue the push with the DSB we can allow the DSB to drive the commits even when VRR is active. Cc: Paz Zcharya <pazz@chromium.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250116201637.22486-9-ville.syrjala@linux.intel.com
2025-01-21drm/i915/dsb: Add support for triggering VRR push with DSBVille Syrjälä
We have at least two options for how to do the TRANS_PUSH_SEND + commit completion signalling with the DSB: Option A) 1. trigger TRANS_PUSH_SEND 2. wait for "safe window" 3. signal the interrupt In this cases step 2 should not do anything if we were already between vmin and vmax decision boundaries. Otherwise we'll wait until the next start of the vblank period. Option B) 1. wait for "safe window" 2. trigger TRANS_PUSH_SEND 3. signal the interrupt This option is perhaps a bit less racy, but if we do somehow screw up and the wait is a nop but the push gets deferred until the next frame then we'll end up completing the commit a frame too early. So for now I'm leaning towards option A since losing the race won't have any drastic consequences. To deal with the race we can give the DSB a bit more time to start step 2 before the hardware has started the vblank termination properly. Often times it seems to be fast enough to make it in time even without any extra vblank delay (the push is issued somewhere within a scanline and it latches on the next scanline). v2: Use intel_vrr_possible() to determine if we need some vblank delay (also avoids adding it for DSI which doens't actually program the transcoder registers correctly for it) Cc: Paz Zcharya <pazz@chromium.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250116201637.22486-8-ville.syrjala@linux.intel.com
generated by cgit v1.2.3 (git 2.25.1) at 2026-03-17 12:37:26 +0000