| Age | Commit message (Collapse) | Author |
|---|
|
There's no need to crash the kernel for these cases.
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit daa62107452d2451787c4248ca38fa2d1a0cbefd)
Cc: stable@vger.kernel.org
|
|
There's no need to crash the kernel for these cases.
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ac6f00beb658239bced4aaed9efbb04a35348d48)
Cc: stable@vger.kernel.org
|
|
There's no need to crash the kernel for these cases.
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5676593d08998d7a6d9e2d51d6b54b3820e3755c)
Cc: stable@vger.kernel.org
|
|
There's no need to crash the kernel for these cases.
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b71604f8685b0eba07866f4e8dc30f93e1931054)
Cc: stable@vger.kernel.org
|
|
There's no need to crash the kernel for this case.
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4d7c25208ca612b754f3bf39e9f16e725b828891)
Cc: stable@vger.kernel.org
|
|
For SOC24 ASICs (RDNA4 / Navi 4x dGPUs) re-enabling PM features fails if an
S3 suspend got aborted, the same issue already handled for SOC21 and SOC15:
commit df3c7dc5c58b ("drm/amdgpu: Reset dGPU if suspend got aborted")
commit 38e8ca3e4b6d ("amdgpu/soc15: enable asic reset for dGPU in case of suspend abort")
The aborted resume fails with:
amdgpu: SMU: No response msg_reg: 6 resp_reg: 0
amdgpu: Failed to enable requested dpm features!
amdgpu: resume of IP block <smu> failed -62
Apply the same workaround for soc24: detect the aborted-suspend state at
resume via the sign-of-life register and reset the device before re-init.
This is a workaround till a proper solution is finalized.
Fixes: 98b912c50e44 ("drm/amdgpu: Add soc24 common ip block (v2)")
Signed-off-by: Jakob Linke <jakob@linke.cx>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fed5bdbfe1d4a19a26c70f7fc58017dc88be1c18)
Cc: stable@vger.kernel.org
|
|
Allow the kernel to dispatch the soft IH work on other CPUs.
Otherwise it can happen that the soft IH ring fills up
before it actually starts processing anything, which
can easily happen with retry page faults, in which case
the CP repeatedly spams the CPU with a lot of interrupts.
This significantly improves retry page fault handling on
GPUs that don't have the filter CAM and must rely on
software based filtering.
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3cdff3c8b93c2834977224d9c2b201fc334dd184)
|
|
Report the correct version of IH v6.1 (previously it showed v6.0).
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 940d33ebbcdebaf095fade86e9c981ad8789aee2)
|
|
For Renior APU with gfx9, in some test scenarios with disabling
ring_reset, like accessing an unmapped invalid address, it can
trigger a gpu job timeout event, then driver uses Mode2 reset
to reset GPU, but after Mode2 compute Ring test and IB test fail
randomly. It because the HQDs of MECs are always active before or
after Mode2, that causes MECs use stale HQDs when MECs are unhalted
before driver restore MQDs, and causes CPC and CPF are still stuck
after Mode2, then causes compute Ring and IB tests fail.
So, add sequences to deactivate HQDs of MECs in suspend IP function
of the resetting process.
v2: Move all sequences into a new function gfx_v9_0_cp_mode2_clear_state (Ray Huang)
To check reset Mode2 method in the if condition (Ray Huang)
v3: Move all sequences before Mode2 instead of after Mode2 (Timur Kristóf)
v4: Call amdgpu_gfx_rlc_enter/exit_safe_mode int the begin and end of
gfx_v9_0_deactivate_kcq_hqd (Alex Deucher)
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c3988a7ad4799514447294f04f063b422e0551df)
Cc: stable@vger.kernel.org
|
|
(v2)
UVD 4.x and older can only access MSG, FEEDBACK buffers from a
specific 256M VRAM segment that the VCPU BO is also located in.
We already modify all placements of the given BO to ensure
the BO is placed within this segment.
Previously, it always assumed that the VCPU segment is
the first 256M of VRAM, even though under some conditions
the VCPU BO could be allocated outside this segment,
which made UVD non-functional as the BOs were
not inside the same segment as the UVD VCPU BO.
Solve that by using the segment where the VCPU BO actually is.
This fixes an issue with UVD failing to initialize on SI/CIK
when resizable BAR is enabled and the VCPU BO is allocated
in a different segment.
v2:
- For other BOs, keep using the same UVD segment as before.
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/3851
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cbfd4d3fc2061a1ec8e9d36e65973ac3e813358a)
Cc: stable@vger.kernel.org
|
|
These UVD versions don't fully support GPUVM and are only
validated to work when their VCPU BO is placed in VRAM.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 01b8dfc0660db5d6cdd62c22dc20f774a26ce853)
Cc: stable@vger.kernel.org
|
|
The UVD code relies on GTT to GTT moves in order to ensure
that its BOs don't cross 256M segments.
Fixes: bfe5e585b44f ("drm/ttm: move last binding into the drivers.")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 21fd45e5e2628d00b478590bcc3d14d3de5d45b6)
Cc: stable@vger.kernel.org
|
|
When testing intersection and compatibility, respect
the actual placement requirements. This is a pre-requisite
for ensuring that UVD CS BOs do not cross 256M segments.
Fixes: ded910f368a5 ("drm/amdgpu: Implement intersect/compatible functions")
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bc06579ca29dee9c245a41b12e39c7bb6938af5d)
Cc: stable@vger.kernel.org
|
|
There are several problems in the context pstate handling code.
The most serious ones are potential use-after-free and NULL pointer
dereferences at context initialization time. Both are due
amdgpu_ctx_init() not holding the adev->pm.stable_pstate_ctx_lock, which
is otherwise used from both sysfs and the context code itself for
modifying and clearing the stored context pointer.
Second issue is that context fini can trample over the pstate
configuration set via sysfs. This is due the restore state
(ctx->stable_pstate) being saved at context init time, and not if, or when
the context actually changes the pstate. As the context exits it will
therefore incorrectly restore to what was set before the sysfs override
was requested.
The simplest fix is to drastically simplify how the state is tracked, by
clearly defining the points at which pstate ownership is taken and
released, and to handle all transitions under the correct lock.
Instead of at context init time, the previous state is saved only at the
point the context overrides the current state, and is restored on context
exit only if the context is still the owner of the current override state.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Fixes: 79610d304133 ("drm/amdgpu: fix pstate setting issue")
Cc: Chengming Gui <Jack.Gui@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1b5e413713c0a93bc1818394d0ce49aaad21bd27)
Cc: <stable@vger.kernel.org> # v6.1+
|
|
amdkfd driver needs allocate buffer to return bo metadata to user space. The
buffer size is controlled by user currently. It is a potential security issue
that hostile value (e.g. 2 GiB) lets any render-group user trigger order-MAX
allocation/OOM in kernel context.
This patch first finds bo metadata size. If the size is smaller than user
provided value drive can safely allocate buffer in kernel space and copy to
user space buffer. If not, driver will let user know, not allocate and copy.
User will redo with new buffer in user space.
This patch lets driver decide buffer allocation size to avoid potential hostile
size from user space.
Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f54ce9e8cbd3abe0eda3a285f54dc4f572fe589a)
|
|
When dumping IB contents from a hung job, amdgpu_devcoredump_format()
acquired the VM root PD's reservation via amdgpu_vm_lock_by_pasid() and
then, for each IB, called amdgpu_bo_reserve() on the BO backing the IB.
Both reservations are reservation_ww_class_mutex objects and neither
used a ww_acquire_ctx, which trips lockdep:
WARNING: possible recursive locking detected
--------------------------------------------
kworker/u128:0 is trying to acquire lock:
ffff88838b16e1f0 (reservation_ww_class_mutex){+.+.}-{4:4},
at: amdgpu_devcoredump_format+0x1594/0x23f0 [amdgpu]
but task is already holding lock:
ffff8882f82681f0 (reservation_ww_class_mutex){+.+.}-{4:4},
at: amdgpu_devcoredump_format+0x1594/0x23f0 [amdgpu]
Possible unsafe locking scenario:
CPU0
----
lock(reservation_ww_class_mutex);
lock(reservation_ww_class_mutex);
*** DEADLOCK ***
May be due to missing lock nesting notation
Workqueue: events_unbound amdgpu_devcoredump_deferred_work [amdgpu]
Call Trace:
__ww_mutex_lock.constprop.0
ww_mutex_lock
amdgpu_bo_reserve
amdgpu_devcoredump_format+0x1594 [amdgpu]
amdgpu_devcoredump_deferred_work+0xea [amdgpu]
The two reservations are on different BOs in the captured trace, so the
splat is a lockdep-correctness warning, not an observed deadlock. It
becomes a real self-deadlock whenever the IB BO shares its dma_resv with
the root PD (the always-valid case, see amdgpu_vm_is_bo_always_valid()):
amdgpu_bo_reserve(abo) re-acquires the same ww_mutex without a ticket
and blocks forever. With amdgpu.gpu_recovery=0 the timeout handler
refires every ~2 s and each invocation produces this splat, drowning the
kernel ring buffer.
Now that amdgpu_vm_lock_by_pasid() takes a drm_exec context, move the IB
dumping into a separate helper that locks the root PD and every IB BO
together in a single drm_exec ticket. DRM_EXEC_IGNORE_DUPLICATES handles
IB BOs that share a dma_resv (e.g. always-valid BOs, or two IBs backed
by the same BO). Every lock is now a top-level acquire under one
ww_acquire_ctx, so the recursive ww_mutex condition is gone, and the
per-IB amdgpu_bo_reserve()/amdgpu_bo_unref() dance -- including a BO
refcount leak on the amdgpu_bo_reserve() failure path -- is removed.
Fixes: 7b15fc2d1f1a ("drm/amdgpu: dump job ibs in the devcoredump")
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d6bf4242731219ee08ce54c365631e395486651e)
|
|
amdgpu_vm_lock_by_pasid() looks up a VM by PASID and reserves its root
PD with a bare amdgpu_bo_reserve(), returning the still-reserved root to
the caller. A caller that then needs to reserve further BOs (for example
the devcoredump IB dump) ends up nesting reservation_ww_class_mutex
acquires without a ww_acquire_ctx, which lockdep flags as recursive
locking.
Convert the helper to take a drm_exec context and lock the root PD with
drm_exec_lock_obj(). Callers now run it inside a
drm_exec_until_all_locked() loop and can lock additional BOs in the same
ww ticket, so there is no nested ww_mutex acquire.
The drm_exec context holds its own reference on the locked root BO, so
the helper no longer hands a root reference back to the caller: the
root output parameter is dropped, and the transient reference taken
across the PASID lookup is released before returning.
The only existing caller, amdgpu_vm_handle_fault(), is updated
accordingly. Its is_compute_context path, which previously dropped the
root reservation around svm_range_restore_pages() and re-took it, now
finalises the drm_exec context and re-initialises a fresh one; behaviour
is otherwise unchanged.
No functional change intended for the page-fault path.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 14682de8ad377bf13ea66e47c26dcfea0b19a21d)
|
|
UTS_RELEASE evaluates to a static string and changes quite easily (e.g.
uncommitted changes in the source tree or new commits). So when checking
if a patch introduces changes to the resulting binary each usage of
UTS_RELEASE is source of annoyance.
Instead of using UTS_RELEASE directly use init_utsname()->release which
evaluates to the same string but with that a change of UTS_RELEASE
doesn't affect amdgpu_dev_coredump.o.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260428144704.1114562-2-u.kleine-koenig@baylibre.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d785df5598fd1d1cc2f2f45c05448271b6d490b7)
|
|
Add a minimum-length check for the AMDGPU_CHUNK_ID_CP_GFX_SHADOW chunk in
amdgpu_cs_pass1(), matching the gate already present for the IB, FENCE and
BO_HANDLES chunk types.
The CP_GFX_SHADOW case previously shared a bare break with the dependency
and syncobj chunk types, which do not dereference a fixed-size struct. When
userspace submits this chunk with length_dw == 0, vmemdup_array_user() is
called with size 0 and returns ZERO_SIZE_PTR, which passes the IS_ERR()
check. amdgpu_cs_p2_shadow() then dereferences chunk->kdata as a struct
drm_amdgpu_cs_chunk_cp_gfx_shadow (reading shadow->flags), faulting on the
ZERO_SIZE_PTR and causing a NULL-pointer dereference.
This is reachable by an unprivileged process in the render group. Reject
undersized chunks with -EINVAL during pass1 so the bad submission is
rejected before pass2 ever dereferences the data.
Fixes: ac9287055ff1 ("drm/amdgpu: add gfx shadow CS IOCTL support")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7f61b2eef7415eccdb40850aca0de94211948657)
Cc: stable@vger.kernel.org
|
|
The AMDGPU_GEM_OP_GET_MAPPING_INFO path of amdgpu_gem_op_ioctl() looks
up the bo_va for the buffer object in the caller's VM via
amdgpu_vm_bo_find(), but uses the returned pointer without checking it.
amdgpu_vm_bo_find() returns NULL when the BO has no bo_va in that VM,
which is the normal case for a BO that has never been mapped. The result
is fed straight into amdgpu_vm_bo_va_for_each_valid_mapping(), which
expands to list_for_each_entry(mapping, &(bo_va)->valids, list) and
dereferences bo_va, causing a NULL pointer dereference.
This is reachable by any process able to issue the ioctl (render group)
simply by requesting mapping info for an unmapped BO.
Return -ENOENT when no bo_va is found, jumping to out_exec so the
drm_exec context and GEM object reference are released.
Fixes: 4d82724f7f2b ("drm/amdgpu: Add mapping info option for GEM_OP ioctl")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 528b19377affc1cc7362a70a254c1dda793595f9)
Cc: stable@vger.kernel.org
|
|
If there is an early failure during amdgpu probe, like missing firmware, it
will end up calling amdgpu_irq_disable_all, which takes irq.lock spinlock
without it being initialized.
Initializing irq.lock earlier at amdgpu_device_init fixes the issue.
[ 79.334079] INFO: trying to register non-static key.
[ 79.334081] The code is fine but needs lockdep annotation, or maybe
[ 79.334083] you didn't initialize this object before use?
[ 79.334084] turning off the locking correctness validator.
[ 79.334088] CPU: 2 UID: 0 PID: 1819 Comm: bash Not tainted 7.1.0-rc5-gfd06300b2348 #96 PREEMPT 8e8f461221633dae3c832d6689eaf0546c0ed4cd
[ 79.334092] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0133 08/05/2024
[ 79.334094] Call Trace:
[ 79.334095] <TASK>
[ 79.334097] dump_stack_lvl+0x5d/0x80
[ 79.334103] register_lock_class+0x7af/0x7c0
[ 79.334109] __lock_acquire+0x416/0x2610
[ 79.334114] lock_acquire+0xcf/0x310
[ 79.334117] ? amdgpu_irq_disable_all+0x3b/0xf0 [amdgpu c88bab43d391d519ad0d5c8e5a099b4aceefa180]
[ 79.334503] ? _raw_spin_lock_irqsave+0x53/0x60
[ 79.334508] _raw_spin_lock_irqsave+0x3f/0x60
[ 79.334510] ? amdgpu_irq_disable_all+0x3b/0xf0 [amdgpu c88bab43d391d519ad0d5c8e5a099b4aceefa180]
[ 79.334881] amdgpu_irq_disable_all+0x3b/0xf0 [amdgpu c88bab43d391d519ad0d5c8e5a099b4aceefa180]
[ 79.335240] amdgpu_device_fini_hw+0x90/0x32c [amdgpu c88bab43d391d519ad0d5c8e5a099b4aceefa180]
[ 79.335704] amdgpu_driver_load_kms.cold+0x22/0x44 [amdgpu c88bab43d391d519ad0d5c8e5a099b4aceefa180]
[ 79.336159] amdgpu_pci_probe+0x204/0x440 [amdgpu c88bab43d391d519ad0d5c8e5a099b4aceefa180]
[ 79.336494] local_pci_probe+0x3c/0x80
[ 79.336500] pci_call_probe+0x55/0x2e0
[ 79.336505] ? _raw_spin_unlock+0x2d/0x50
[ 79.336508] ? pci_match_device+0x157/0x180
[ 79.336512] pci_device_probe+0x9b/0x170
[ 79.336516] really_probe+0xd5/0x370
[ 79.336521] __driver_probe_device+0x84/0x150
[ 79.336525] device_driver_attach+0x47/0xb0
[ 79.336528] bind_store+0x73/0xc0
[ 79.336531] kernfs_fop_write_iter+0x176/0x250
[ 79.336536] vfs_write+0x24d/0x560
[ 79.336542] ksys_write+0x71/0xe0
[ 79.336546] do_syscall_64+0x122/0x710
[ 79.336550] ? do_syscall_64+0xd1/0x710
[ 79.336553] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[ 79.336557] RIP: 0033:0x7f92fd675006
[ 79.336561] Code: 5d e8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 75 19 83 e2 39 83 fa 08 75 11 e8 26 ff ff ff 66 0f 1f 44 00 00 48 8b 45 10 0f 05 <48> 8b 5d f8 c9 c3 0f 1f 40 00 f3 0f 1e fa 55 48 89 e5 48 83 ec 08
[ 79.336562] RSP: 002b:00007ffe4fa867a0 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
[ 79.336565] RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007f92fd675006
[ 79.336567] RDX: 000000000000000d RSI: 000055b2dfce59b0 RDI: 0000000000000001
[ 79.336568] RBP: 00007ffe4fa867c0 R08: 0000000000000000 R09: 0000000000000000
[ 79.336569] R10: 0000000000000000 R11: 0000000000000202 R12: 000000000000000d
[ 79.336570] R13: 000055b2dfce59b0 R14: 00007f92fd7ca5c0 R15: 000055b2dfdbaf70
[ 79.336574] </TASK>
Fixes: 9950cda2a018 ("drm/amdgpu: drop the drm irq pre/post/un install callbacks")
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7dba3e10ecdeec85208e255853fcd3890880b10e)
|
|
The cleaner shader sysfs path allocates a 16-dword (64 byte) IB but
incorrectly fills (align_mask + 1) dwords. On GFX rings align_mask is
0xff, so the loop wrote 256 dwords into a 64-byte buffer, causing a
kernel page fault.
The IB only needs to be a minimal NOP shell to schedule the job; the
cleaner shader itself is emitted on the ring via emit_cleaner_shader().
Fill 16 dwords to match the allocation.
v2: Use ib_size_dw variable (Lijo)
Fixes: d361ad5d2fc0 ("drm/amdgpu: Add sysfs interface for running cleaner shader")
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bf21af331ebf72d0935fd70c73192414a422c03a)
CC: stable@vger.kernel.org
|
|
Replace the stack-allocated amdgpu_lockdep mutex with a heap allocation
via kmalloc to fix a stack overflow caused by the large struct size.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit dbae980eefb2f46f31cee12f1f8540d0d79f61ae)
|
|
The GPU reload test (S3 / mode1 reset / module reload) triggers a
WARN_ON in amdgpu_irq_put() on gfx10 when unloading amdgpu:
WARNING: CPU: 0 PID: 2314 at amd/amdgpu/amdgpu_irq.c:676 amdgpu_irq_put+0xc3/0xe0 [amdgpu]
Call Trace:
gfx_v10_0_hw_fini+0x41/0x150 [amdgpu]
amdgpu_ip_block_hw_fini+0x29/0xc0 [amdgpu]
amdgpu_device_fini_hw+0x315/0x610 [amdgpu]
amdgpu_driver_unload_kms+0x7c/0x90 [amdgpu]
amdgpu_pci_remove+0x51/0x90 [amdgpu]
amdgpu_device_ip_resume_phase2() skips IP blocks whose status.hw is
already set, but amdgpu_device_ip_suspend_phase2() never had the
matching guard, so a block can be suspended twice (e.g. a reset or
recovery issued while the device is already suspended). The second
suspend runs hw_fini again, which now releases the gfx fault IRQs
unconditionally, dropping a refcount that is already zero and tripping
the WARN_ON in amdgpu_irq_put().
The fault/EOP IRQ get/put were balanced through late_init/hw_fini
before, which masked the double-suspend; moving the get into hw_init
made the suspend/resume asymmetry visible as an IRQ refcount underflow.
Honor status.hw in ip_suspend_phase2() so suspend mirrors resume and a
block is only torn down once.
Fixes: 9117d8be850b ("drm/amdgpu/gfx: move fault and EOP IRQ get/put to hw_init/hw_fini")
Fixes: 482f0e538580 ("drm/amdgpu: fix double ucode load by PSP(v3)")
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f44f2af13c418969be358b15743f939d705de998)
|
|
This fixes read /sys/class/drm/cardN/device/devcoredump/data
return empty content sometimes.
amdgpu_devcoredump_format() leaves struct drm_print_iterator's
.start field uninitialized on the stack before passing it to
drm_coredump_printer(). __drm_puts_coredump() compares the running
.offset against .start to decide whether to skip or copy each
chunk:
if (iterator->offset < iterator->start) {
if (iterator->offset + len <= iterator->start) {
iterator->offset += len;
return;
}
...
}
Fixes: 4bbba79a7f1d ("drm/amdgpu: move devcoredump generation to a worker")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cd6397b7af8262a380e188dc32e9de11ff897ed2)
|
|
amdgpu_amdkfd_gpuvm_free_memory_of_gpu() unpinned DOORBELL and MMIO
remap BOs (which are pinned at allocation time) before checking whether
the BO is still mapped to the GPU. When the BO is still mapped, the
function returns -EBUSY and leaves the BO alive, but it has already
been unpinned. The BO is then unpinned again when it is finally freed
during process teardown, triggering a ttm_bo_unpin() underflow warning:
WARNING: CPU: 18 PID: 15066 at ttm/ttm_bo.c:650 amdttm_bo_unpin+0x6d/0x80 [amdttm]
Workqueue: kfd_process_wq kfd_process_wq_release [amdgpu]
RIP: 0010:amdttm_bo_unpin+0x6d/0x80 [amdttm]
Call Trace:
amdgpu_bo_unpin+0x1a/0x90 [amdgpu]
amdgpu_amdkfd_gpuvm_unpin_bo+0x31/0xb0 [amdgpu]
amdgpu_amdkfd_gpuvm_free_memory_of_gpu+0x3bf/0x460 [amdgpu]
kfd_process_free_outstanding_kfd_bos+0xd4/0x170 [amdgpu]
kfd_process_wq_release+0x109/0x1b0 [amdgpu]
process_one_work+0x1e2/0x3b0
worker_thread+0x50/0x3a0
kthread+0xdd/0x100
ret_from_fork+0x29/0x50
Move the unpin after the mapped_to_gpu_memory check so it only happens
once we are committed to freeing the BO.
Fixes: d25e35bc26c3 ("drm/amdgpu: Pin MMIO/DOORBELL BO's in GTT domain")
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 927c5b2defb9b09856444d94bebfd056a002bd75)
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-7.2-2026-06-04:
amdgpu:
- UserQ fix
- Userptr fix
- MCCS freesync fix
- Remove some triggerable BUG() calls
- DCN 4.2.1 fixes
- Lockdep annotations
- Guilty handling fix
- VCN 5.3 fix
- FRL fixes
- Bounds checking fixes
- HMM fix
- IRQ accounting fix
amdkfd:
- Fix an event information leak
- Events bounds check fix
- Trap cleanup fix
- Bounds checking fixes
- MES fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20260604231801.19979-1-alexander.deucher@amd.com
|
|
priv_reg / priv_inst / bad_op and (on v11+) userq EOP IRQs are
acquired in late_init but released in hw_fini. This split forced
gfx_v9_0_hw_fini() to defensively guard each put with
amdgpu_irq_enabled() because hw_fini runs on paths that may not
reach late_init.
amdgpu_ip_block_hw_fini() only runs after hw_init returns success,
and suspend / resume cycle the refs through the same path, so
hw_init / hw_fini pair without any extra tracking. Move the gets
there and drop the guards.
While here, fix the pre-existing partial-failure leak in
set_userq_eop_interrupts() (gfx11 / 12_0 / 12_1). amdgpu_irq_get()
increments the refcount before calling .set, so a failure partway
through the loop leaves earlier successful gets stranded. Track
the loop position and roll back on the enable path.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Since commit c08972f55594 ("drm/amdgpu: fix amdgpu_hmm_range_get_pages")
moved mmu_interval_read_begin() out of the per-chunk loop, the
captured notifier_seq is no longer refreshed across retries. As a
result, the existing -EBUSY retry path can never make progress:
hmm_range_fault() returns -EBUSY only when
mmu_interval_check_retry(notifier, notifier_seq) reports that the
sequence is stale. Once the sequence has advanced, the stored seq
will never match again, so every subsequent call within the same
invocation returns -EBUSY immediately.
The "goto retry" therefore degenerates into a busy spin that simply
burns CPU for the full HMM_RANGE_DEFAULT_TIMEOUT (~1s) window before
finally bailing out with -EAGAIN. This is pure latency with no chance
of recovery, and it actively hurts the KFD userptr stack: the caller
ends up blocked for a second while holding mmap_lock, only to return
-EAGAIN to the restore worker (or to userspace) which would have
re-driven the operation immediately anyway.
Drop the retry/timeout entirely and let -EBUSY propagate straight to
out_free_pfns, where it is already translated to -EAGAIN. Recovery is
handled at a higher level: the KFD restore_userptr_worker reschedules
itself, and the userptr ioctl path returns -EAGAIN to userspace.
No functional regression: the previous behaviour on -EBUSY was already
to fail with -EAGAIN after a 1s stall; we just skip the stall.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Honglei Huang <honghuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
MES firmware should report the same version whether read from
the register or from the firmware ucode binary. This is not
always the case, so add a log when they mismatch.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
MES firmware should report the same version whether read from
the register or from the firmware ucode binary. This is not
always the case, so add a log when they mismatch.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
MES firmware should report the same version whether read from
the register or from the firmware ucode binary. This is not
always the case, so add a log when they mismatch.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Make sure that we only submit work with full up to date VM page tables.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Tested-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use correct u64 type.
Signed-off-by: David Rosca <david.rosca@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable secure submission support on the unified ring for VCN IP version
5.3.0 by setting `secure_submission_supported = true` in
vcn_v5_0_0_unified_ring_vm_funcs.
Secure IB submission is supported on VCN 5.3.0 hardware/firmware,
allowing protected decode workloads to bypass the common IB gate.
Without this, secure playback submissions can be blocked and fail.
Other VCN 5.x variants using the same vcn_v5_0_0_ip_block
(e.g. IP_VERSION(5, 0, 0)) do not support secure submission
on the unified ring and therefore continue using non-secure paths.
This change only advertises existing hardware/firmware capability;
non-secure decode paths remain unaffected.
Signed-off-by: Jeevana Muthyala <Jeevana.Muthyala2@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The guilty handling tried to establish a second way of signaling problems with
the GPU back to userspace. This caused quite a bunch of issue we had to work
around, especially lifetime issues with the drm_sched_entity.
Just drop the handling altogether and use the dma_fence based approach instead.
v2: fix reversed condition in entity check (Alex)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add lockdep annotations to teach lockdep the correct lock hierarchy
and catch ordering violations during development. This follows the
pattern established by dma-resv in drivers/dma-buf/dma-resv.c.
Lock ordering hierarchy (outermost to innermost):
1. userq_sch_mutex - Global userq scheduler (enforce_isolation)
2. userq_mutex - Per-context userq (held across queue create/destroy)
3. notifier_lock - MMU notifier synchronization
4. vram_lock - VRAM memory allocator
5. reset_domain->sem - GPU reset synchronization
6. reset_lock - Reset control mutex
7. srbm_mutex - SRBM register access
8. grbm_idx_mutex - GRBM index register access
9. mmio_idx_lock - MMIO index access (spinlock)
The implementation provides:
- Lock ordering training at module init (amdgpu_lockdep_init)
- Lock class association for real driver locks (amdgpu_lockdep_set_class)
Dummy locks are associated with the same class keys as real driver locks
via lockdep_set_class(), ensuring lockdep connects the training ordering
with actual runtime locks.
Testing:
Build the kernel with CONFIG_PROVE_LOCKING=y (enables CONFIG_LOCKDEP):
scripts/config --enable PROVE_LOCKING
scripts/config --enable DEBUG_LOCKDEP
make -j$(nproc)
On boot, dmesg should show:
AMDGPU: Lockdep annotations initialized (9 lock levels)
The companion IGT test (tests/amdgpu/amd_lockdep) exercises lock-heavy
GPU code paths concurrently to trigger lockdep warnings on violations:
sudo ./build/tests/amdgpu/amd_lockdep
sudo dmesg | grep -A 50 "circular locking dependency"
IGT subtests:
concurrent-reset-and-submit - reset_sem vs submission locks
concurrent-mmap-and-evict - mmap_lock vs vram_lock
concurrent-userptr-and-reset - notifier_lock vs reset_sem
stress-all-paths - all of the above simultaneously
A clean dmesg (no "circular locking dependency" or "possible recursive
locking detected" messages) confirms no lock ordering violations.
For CI integration, the test should be run on kernels compiled with
CONFIG_LOCKDEP=y; dmesg is scanned post-run for lockdep splats.
v2: (Christian)
- Move notifier_lock and vram_lock before reset locks in hierarchy.
HMM invalidation holds notifier_lock and can wait for GPU reset
completion, so notifier_lock must be outer to reset_domain->sem.
- Associate dummy locks with lock class keys via lockdep_set_class()
so lockdep connects training with real driver locks.
- Update commit message to list all 9 lock levels.
Requires CONFIG_PROVE_LOCKING=y to activate.
Cc: Christian Konig <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: Christian Konig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Replace BUG()/BUG_ON() with error logs and safe returns in several
places where they can be triggered by invalid userspace input,
preventing DoS via kernel panic.
Signed-off-by: Ce Sun <cesun102@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-7.2-2026-06-03:
amdgpu:
- BT.2020 fix for DCE
- DC bounds checking fixes
- SDMA 7.1 fix
- UserQ fixes
- SI fix
- SMU 13 fixes
- SMU 14 fixes
- GC 12.1 fix
- Userptr fix
- GC 10.1 fix
- GART fix for non-4K pages
- DCN 4.x fixes
- DCN 4.2 updates
- More DC KUnit tests
- PSR cleanup
- Support for connectors without DDC pins
- Initial DCN 4.2.1 support
- Initial HDMI 2.1 FRL support
- Misc bounds check fixes
- RAS fixes
- GC 11.5.6 support
- SDMA 6.4.0 support
- NBIO 7.11.5 support
- IH 6.4.0 support
- HDP 6.4.0 support
- MMHUB 3.4.2 support
- SMU 15.0.5 support
- ATHUB 3.4.2 support
- VPE 2.2 support
- Devcoredump fixes
- _PR3 fix
amdkfd:
- UAF race fix
- Fix a potential NULL pointer dereference
- GC 11 buffer overflow fix for SDMA
- Profiler locking order fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20260604013527.2373534-1-alexander.deucher@amd.com
|
|
When mapping VRAM pages into the GART page table,
amdgpu_gart_map_vram_range() assumes that the system page size is the
same as the GPU page size.
On systems with non-4K page sizes, multiple GPU pages can exist within
a single CPU page. As a result, the mappings are created incorrectly
because fewer page table entries are programmed than required.
Fix this by programming the mappings correctly for non-4K page size
systems.
Fixes: 237d623ae659 ("drm/amdgpu/gart: Add helper to bind VRAM pages (v2)")
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
cp_ecc_error_irq is acquired in amdgpu_gfx_ras_late_init() but
released in gfx_v9_0_hw_fini(), so the put site has to query
amdgpu_irq_enabled() because the get is skipped on SR-IOV VF.
ras_late_init / ras_fini have no suspend counterpart, so move the
put to amdgpu_gfx_ras_suspend() / amdgpu_gfx_ras_fini() and add a
matching ras_suspend callback that is invoked from
amdgpu_ras_suspend() before disable_all_features(). The get and
put now sit in the same place and check the same condition (not
VF, funcs registered), no refcount querying needed.
An active flag gates ras_fini so the
suspend-then-unload-without-resume path falls into
amdgpu_ras_block_late_fini_default() instead of double-releasing
what ras_suspend already cleaned up.
Drop the cp_ecc_error_irq put from gfx_v9_0_hw_fini(). gfx_v8_0
manages cp_ecc_error_irq locally and is unaffected; no other GFX
generation has this IRQ.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The mca ras sub-blocks (mp0, mp1, mpio) all share the
AMDGPU_RAS_BLOCK__MCA block id and are distinguished only by
sub_block_index. The ras manager object for an mca block is selected
with:
con->objs[AMDGPU_RAS_BLOCK__LAST + head->sub_block_index]
Since the rework in commit 7f544c5488cf ("drm/amdgpu: Rework mca ras
sw_init") moved the ras_comm setup into amdgpu_mca_mp*_ras_sw_init() but
left sub_block_index unset, mp0/mp1/mpio all default to index 0 and
collide on the same object slot. mp0 grabs the slot and creates its
sysfs node first; mp1 (and mpio) then find the slot already in use, so
amdgpu_ras_block_late_init() -> amdgpu_ras_sysfs_create() returns
-EINVAL:
amdgpu: mca.mp1 failed to execute ras_block_late_init_default! ret:-22
amdgpu: amdgpu_ras_late_init failed -22
amdgpu: amdgpu_device_ip_late_init failed
amdgpu: Fatal error during GPU init
The error is currently masked because amdgpu_ras_late_init() does not
check the return value of amdgpu_ras_block_late_init_default(), but it
already leaves mp1/mpio without their sysfs nodes and becomes a fatal
init failure as soon as that return value is honored.
Restore the per-sub-block sub_block_index assignment so each mca
sub-block maps to its own object slot.
Fixes: 7f544c5488cf ("drm/amdgpu: Rework mca ras sw_init")
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In case when queue_create fails and mqd has already been
allocated and hence wptr_obj is not cleaned up.
So moving that cleanup part to mqd_destroy so it takes
care of all the cases of clean up and during tear down of
the queue.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Legacy CPER ring readers can issue one debugfs read with a buffer larger
than the UNIRAS RAS command payload limit. Passing that full size to
GET_CPER_RECORD makes the command reject the request, so userspace may
only see the ring prefix and treat the CPER stream as empty.
Commit 3c88fb7aa57d ("drm/amd/ras: bound CPER record fetch buffer
size") intentionally bounds CPER record fetch allocation by the command
buffer size. Keep the debugfs ABI as a single contiguous ring read by
splitting the internal GET_CPER_RECORD requests into
RAS_CMD_MAX_CPER_BUF_SZ chunks.
Accumulate the copied payload and update the legacy header write pointers
from the total bytes returned to userspace.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use find_next_zero_bit() to locate the next free seq slot bit
instead of the current walk, for more efficient bitmap scanning.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
_PR3 detection was changed in commit 134b8c5d8674 ("drm/amd: Fix
detection of _PR3 on the PCIe root port") to look at the root port
of the topology containing the GPU. This however was too far because
it ignored whether or not all the intermediary bridges could power
off the device. The original design in commit b10c1c5b3a4e ("drm/amdgpu:
add check for ACPI power resources") was too narrow because it matched
the switches internal to the GPU.
Use the goldilocks approach and look for the first bridge outside of the
GPU and check for _PR3 on that device.
Fixes: 134b8c5d8674 ("drm/amd: Fix detection of _PR3 on the PCIe root port")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The VF RAS error handler used fixed-size bps[] / bps_bo[] arrays (512
slots). When the PF2VF bad-page block listed more entries than fit,
amdgpu_virt_ras_add_bps() could memcpy() past the end of those arrays.
Replace the fixed backing store with a dynamically grown table:
- Add capacity to track allocated slots separately from count.
- Start at 512 slots and realloc bps / bps_bo together when full.
- Refuse growth beyond maximum EEPROM record limit (AMDGPU_VIRT_RAS_BAD_PAGE_TABLE_MAX_CAPACITY).
- Return failure from amdgpu_virt_ras_add_bps() and stop processing
the PF2VF block if allocation fails or the cap is reached.
Signed-off-by: Chenglei Xie <Chenglei.Xie@amd.com>
Reviewed-by: YiPeng Chai <YiPeng.Chai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Mesa userqueues free does not wait for the free to complete and go ahead
in unmapping the vital bos while kernel is still in queue free and
corresponding cleanup.
So ideally we don't need the logging for that and hence remove the warn
message as this is expected behaviour and functionally, we are making
sure to wait for the required fences before unmap.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Problem:
While developing the amd_close_race IGT test (which intentionally triggers
execute permission faults by removing VM_PAGE_EXECUTABLE from GPU page table
entries), we discovered that on Navi10 (GFX 10.1.x) these faults produce
zero diagnostic output. The GPU simply hangs silently for ~10s until the
scheduler timeout fires. There is no way to distinguish an execute
permission fault from any other type of GPU hang.
Root cause:
GFX 10.1.x defaults to noretry=0, which sets
RETRY_PERMISSION_OR_INVALID_PAGE_FAULT=1 in the GFXHUB UTCL2 registers
(gfxhub_v2_0.c line 313). With this bit set, permission faults (valid PTE,
wrong R/W/X bits) are handled entirely within the UTCL1/UTCL2 hardware
loop: UTCL2 returns an XNACK to UTCL1, and UTCL1 re-requests the
translation indefinitely, expecting software to eventually fix the
permission bits (as happens in SVM/HMM recovery). No interrupt of any kind
reaches the IH ring.
This is different from invalid-page faults (V=0) which DO generate a retry
fault interrupt that the driver can escalate to a no-retry fault. Permission
faults with valid PTEs loop silently forever in hardware.
GFX 10.3+ already defaults to noretry=1, which makes permission faults
generate immediate L2 protection fault interrupts. GFX 10.1.x was
inadvertently left out of this default.
Fix:
Change the noretry=1 threshold from IP_VERSION(10, 3, 0) to
IP_VERSION(10, 1, 0) in amdgpu_gmc_noretry_set(). This is a one-line
change that aligns GFX 10.1.x behavior with GFX 10.3+ and all newer
generations.
With noretry=1, the existing non-retry fault handler
(gmc_v10_0_process_interrupt) already decodes and prints the full
GCVM_L2_PROTECTION_FAULT_STATUS register including PERMISSION_FAULTS,
faulting address, VMID, PASID, and process name. No additional logging
code is needed — the fix is purely routing permission faults to the
existing, fully-capable non-retry interrupt handler.
v2: Dropped GFX10-specific logging from gmc_v10_0.c and
kfd_int_process_v10.c (Felix Kuehling). v1 added logging in the retry
fault handler, but with noretry=1 permission faults take the non-retry
path — the v1 retry handler code was dead and would never execute.
Tested on Navi10 (GFX 10.1.10):
- Execute permission faults now produce immediate, clear output:
[gfxhub] page fault (src_id:0 ring:64 vmid:4 pasid:592)
Process amd_close_race pid 13380 thread amd_close_race pid 13384
in page at address 0x40001000 from client 0x1b (UTCL2)
GCVM_L2_PROTECTION_FAULT_STATUS:0x00700881
PERMISSION_FAULTS: 0x8
- No regressions with properly-mapped GPU workloads
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When the fault stop mode isn't AMDGPU_VM_FAULT_STOP_ALWAYS,
these bits should be programmed to 0.
Program CRASH_ON_NO_RETRY_FAULT and CRASH_ON_RETRY_FAULT
always, to make sure to clear the bits when we don't want
to crash.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
