| Age | Commit message (Collapse) | Author |
|---|
|
Unmap and unpin the GHCB as needed when freeing a vCPU. If the VM is
destroyed after mapping+pinning the GHCB on #VMGEXIT, without re-running
the vCPU, KVM will effectively leak the GHCB and any mappings created for
the GHCB.
Fixes: 291bd20d5d88 ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT")
Cc: stable@vger.kernel.org
Tested-by: Michael Roth <michael.roth@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-18-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20260529183549.1104619-18-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Decouple synchronizing the GHCB SA from freeing/unpinning the SA, so that
the free/unpin path can be reused when freeing a vCPU.
Opportunistically add a WARN to harden KVM against stomping over (and thus
leaking) an already-allocated scratch area.
Cc: stable@vger.kernel.org
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-17-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20260529183549.1104619-17-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Relocate sev_free_vcpu() down in sev.c so that it's definition comes after
sev_es_unmap_ghcb(). This will allow sharing unmap functionality between
the two functions without needing a forward declaration (or weird placement
of the common code).
No functional change intended.
Cc: stable@vger.kernel.org
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-16-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20260529183549.1104619-16-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Rework Page State Change (PSC) handling to read the guest-provided start
and end indices exactly once, at the beginning of the request. Re-reading
the indices is "fine", _if_ the guest is well-behaved. KVM _should_ be
safe against concurrent guest modification of the indices, but there is
zero reason to introduce unnecessary risk.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-14-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20260529183549.1104619-14-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a "psc" struct to vcpu_sev_es_state to avoid having to prefix all of
the fields with "psc_".
Take advantage of the code churn to opportunistically rename local
variables to "guest_psc" to make it more obvious that the buffer is guest
data, and more importantly, guest accessible!
Opportunistically rename inflight => batch_size as well, because there can
really only be one operation in-flight (per-vCPU), i.e. "inflight" _looks_
like a boolean, but in actuality is an integer tracking how many pages are
being handled by the current operation.
No functional change intended.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-13-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20260529183549.1104619-13-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Increment the guest-visible "cur_entry" index outside of the for-loop
when processing Page State Change entries, and add a comment to make it
more obvious which code is operating on trusted data, and which code is
touching guest-accessible data.
No functional change intended.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-12-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20260529183549.1104619-12-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
|
|
Use READ_ONCE() when reading entries/indices from the guest-accessible
Page State Change buffer to defend against TOCTOU bugs.
Don't bother with READ_ONCE()/WRITE_ONCE() for cases where KVM is writing
(and not consuming the result!), as the guest isn't supposed to touch the
buffer while it's being processed. I.e. using READ_ONCE() is all about
protecting against misbehaving guests.
Fixes: 9b54e248d264 ("KVM: SEV: Add support to handle Page State Change VMGEXIT")
Cc: stable@vger.kernel.org
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-11-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When processing Page State Change (PSC) requests, validate the PSC buffer
against the effective size of the scratch area, which could be less than
the maximum size if the guest provided a pointer that isn't exactly at the
start of the GHCB shared buffer.
Fixes: 9b54e248d264 ("KVM: SEV: Add support to handle Page State Change VMGEXIT")
Cc: stable@vger.kernel.org
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Stop explicitly passing the PSC buffer to snp_begin_psc(): it *must*
be the scratch area. This will allow fixing a variety of bugs without
further complicating the code.
No functional change intended.
Cc: stable@vger.kernel.org
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Now that all paths in KVM properly validate the length needed for the
scratch area, and are guaranteed to pass in a non-zero length, WARN if KVM
attempts to configured the scratch area with min_len==0 to guard against
future bugs.
Cc: stable@vger.kernel.org
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When setting the length of the GHCB scratch area, and the area is in the
GHCB shared buffer, set the effective length of the scratch area to the max
possible size given the start of the guest-provided pointer, and the end of
the shared buffer.
The code was "fine" when first introduced, as KVM doesn't consult the
length of the buffer when emulating MMIO, because the passed in @len always
specifies the *max* size required. But for PSC requests, the incoming @len
is just the minimum length (to process the header), and KVM needs to know
the full size of the scratch area to avoid buffer overflows (spoiler alert).
Opportunistically rename @len => @min_len to better reflect its role.
Fixes: 9b54e248d264 ("KVM: SEV: Add support to handle Page State Change VMGEXIT")
Cc: stable@vger.kernel.org
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When handling a Page State Change (PSC) #VMGEXIT use the size of the PSC
header as the minimum size for the scratch area. Per the GHCB spec, PSC
requests do NOT provide the length, i.e. using control->exit_info_2 for the
length is completely made up behavior. The existing code "works", e.g.
even though Linux-as-a-guest always passes '0', because KVM doesn't do
anything with the length when the request is in the GHCB's shared buffer.
Use the header as the min length. Once the header is retrieved, KVM can
use the specified indices to compute the full size of the request.
Fixes: 9b54e248d264 ("KVM: SEV: Add support to handle Page State Change VMGEXIT")
Cc: stable@vger.kernel.org
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Explicitly ignore Port I/O requests of length '0' (or count '0'), so that
setting up the software scratch area (and other code) doesn't have to
worry about underflowing the length, and to allow for WARNing on trying
to configure the scratch area with len==0.
Fixes: 291bd20d5d88 ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT")
Cc: stable@vger.kernel.org
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When using GHCB v2+, reject MMIO requests that are larger than 8 bytes.
Per the GHCB spec:
SW_EXITINFO2 must be less than or equal to 0x7fffffff for version 1 and
less than or equal to 0x8 for all other versions.
Fixes: 4af663c2f64a ("KVM: SEV: Allow per-guest configuration of GHCB protocol version")
Cc: stable@vger.kernel.org
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Explicitly ignore MMIO requests of length '0', so that setting up the
software scratch area (and other code) doesn't have to worry about
underflowing the length, and to allow for special casing '0' in the
future.
Fixes: 8f423a80d299 ("KVM: SVM: Support MMIO for an SEV-ES guest")
Cc: stable@vger.kernel.org
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
As per the GHCB spec, when using GHCB v2+ require the software scratch area
to reside in the GHCB's shared buffer. Note, things like Page State Change
(PSC) requests _rely_ on this behavior, as the guest can't provide a length
when making the request, i.e. the size of the guest payload is bounded by
the size of the shared buffer.
Failure to force usage of the GHCB, and a slew of other flaws, lets a
malicious SNP guest corrupt host kernel heap memory, and leak host heap
layout information.
setup_vmgexit_scratch() allocates a buffer via kvzalloc(exit_info_2),
where exit_info_2 is guest-controlled. With exit_info_2=24, this yields
a 24-byte allocation in kmalloc-cg-32 (32-byte slab objects). The buffer
holds an 8-byte psc_hdr followed by 8-byte psc_entry structs, so only
entries[0] and entries[1] are in-bounds.
snp_begin_psc() validates end_entry against VMGEXIT_PSC_MAX_COUNT (253)
but NOT against the actual buffer size:
idx_end = hdr->end_entry;
if (idx_end >= VMGEXIT_PSC_MAX_COUNT) { // checks 253, not buffer
snp_complete_psc(svm, ...);
return 1;
}
for (idx = idx_start; idx <= idx_end; idx++) {
entry_start = entries[idx]; // OOB when idx >= 2
The guest sets end_entry=10+, causing the host to iterate entries[2+]
which are OOB into adjacent slab objects. For each OOB entry:
- The host reads 8 bytes (OOB READ / info leak oracle)
- If the data passes PSC validation, __snp_complete_one_psc() writes
cur_page = 1 or 512 into the entry (OOB WRITE, sev.c:3806)
- If validation fails, the error response reveals whether adjacent
memory is zero vs non-zero (information disclosure to guest)
The guest controls allocation size (exit_info_2), entry range
(cur_entry/end_entry), and can fire unlimited VMGEXITs to repeatedly
hit different slab positions.
By exploiting the variety of bugs, a malicious SEV-SNP guest can:
- OOB read adjacent kmalloc-cg-32 objects (heap layout disclosure)
- OOB write cur_page bits into adjacent objects (heap corruption)
- Trigger use-after-free conditions across VMGEXITs
E.g. with KASAN enabled, a single insmod of the PoC guest module
produces 73 KASAN reports:
BUG: KASAN: slab-out-of-bounds in snp_begin_psc+0x126/0x890
Read of size 8 at addr ffff888219ffb5e0 by task qemu-system-x86/2199
BUG: KASAN: slab-out-of-bounds in snp_begin_psc+0x468/0x890
Write of size 8 at addr ffff888351566648 by task qemu-system-x86/2199
The buggy address belongs to the object at ffff888XXXXXXXXX
which belongs to the cache kmalloc-cg-32 of size 32
The buggy address is located N bytes to the right of
allocated 32-byte region [ffff888XXXXXXXXX, ffff888XXXXXXXXX)
Breakdown:
62 slab-out-of-bounds (reads + writes past allocation)
7 slab-use-after-free
4 use-after-free
All credit to Stan for the wonderful description and reproducer!
Reported-by: Stan Shaw <shawstan96@gmail.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Peter Gonda <pgonda@google.com>
Cc: Jacky Li <jackyli@google.com>
Fixes: 4af663c2f64a ("KVM: SEV: Allow per-guest configuration of GHCB protocol version")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Roth <michael.roth@amd.com>
[sean: write changelog]
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM x86 fixes for 7.1-rcN
- Include the kernel's linux/mman.h in KVM selftests to ensure MADV_COLLAPSE
is defined, as older libc versions may not provide it.
- Include execinfo.h if and only if KVM selftests are building against glibc,
and provide a test_dump_stack() for non-glibc builds.
- Fudge around an RCU splat in the emegerncy reboot code that is technically
a legitimate flaw, but in practice is a non-issue and fixing the flaw, e.g.
by adding locking, would incur meaningful risk, i.e. do more harm than good.
- Rate-limit global clock updates once again (but without delayed work), as
KVM was subtly relying on the old rate-limiting for NPT correction to guard
against "update storms" when running without a master clock on systems with
overcommitted CPUs.
- Fix a brown paper bag goof where KVM checked if ERAPS is "dirty" instead of
marking it dirty when emulating INVPCID.
- Flush the TLB when transitioning from xAVIC => x2AVIC to ensure the CPU TLB
doesn't contain AVIC-tagged entries for the APIC base GPA.
|
|
Pull kvm fixes from Paolo Bonzini:
"arm64:
- Fix ITS EventID sanitisation when restoring an interrupt
translation table.
- Fix PPI memory leak when failing to initialise a vcpu.
- Correctly return an error when the validation of a hypervisor trace
descriptor fails, and limit this validation to protected mode only.
RISC-V:
- Fix invalid HVA warning in steal-time recording
- Return SBI_ERR_FAILURE to guest upon OOM in pmu_event_info() and
pmu_snapshot_set_shmem()
- Fix NULL pointer dereference in SBI v0.1 SEND_IPI handler
- Fix sign extension of value for MMIO loads
s390:
- Fix bugs in vSIE (nested virtualization) and UCONTROL, caused by
the page table rewrite.
x86:
- Apply erratum #1235 workaround (disable AVIC IPI virtualization) on
Hygon Family 18h, just like on AMD Family 17h.
- When KVM_CAP_X86_APIC_BUS_CYCLES_NS is queried on a specific VM,
return the VM's configured APIC bus frequency instead of the
default. This is less confusing (read: not wrong) and makes it
easier to fill in CPUID information that communicates the APIC bus
frequency to the guest.
Selftests:
- Do not include glibc-internal <bits/endian.h>; it worked by chance
and broke building KVM selftests with musl"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Disable AVIC IPI virtualization on Hygon Family 18h (erratum #1235)
KVM: selftests: Verify that KVM returns the configured APIC cycle length
KVM: x86: Return the VM's configured APIC bus frequency when queried
KVM: selftests: elf: Include <endian.h> instead of <bits/endian.h>
KVM: s390: Properly reset zero bit in PGSTE
KVM: s390: vsie: Fix redundant rmap entries
KVM: s390: vsie: Fix unshadowing logic
KVM: s390: Fix leaking kvm_s390_mmu_cache in case of errors
KVM: s390: vsie: Fix memory leak when unshadowing
KVM: arm64: Fix nVHE/pKVM hyp tracing error on invalid desc
KVM: arm64: vgic: Free private_irqs when init fails after allocation
KVM: arm64: vgic-its: Reject restored DTE with out-of-range num_eventid_bits
RISC-V: KVM: Fix sign extension for MMIO loads
RISC-V: KVM: Fix NULL pointer dereference in SBI v0.1 SEND_IPI handler
riscv: kvm: return SBI_ERR_FAILURE for pmu_event_info() when OOM
riscv: kvm: return SBI_ERR_FAILURE for pmu_snapshot_set_shmem() when OOM
RISC-V: KVM: Fix invalid HVA warning in steal-time recording
|
|
Hygon Family 18h CPUs are derived from AMD Family 17h (Zen1) silicon and
share the same erratum #1235: hardware may read a stale IsRunning=1 bit
during ICR write emulation and silently fail to generate an
AVIC_IPI_FAILURE_TARGET_NOT_RUNNING VM-Exit on the sending vCPU.
The absence of the VM-Exit causes KVM to miss the required wakeup of
blocking target vCPUs, leading to hung vCPUs and unbounded delays in
guest execution.
Extend the existing AMD Family 17h erratum #1235 workaround to also cover
Hygon Family 18h. With IPI virtualization disabled, KVM never sets
IsRunning=1 in the Physical ID table, so every non-self IPI generates a
VM-Exit and is correctly emulated.
Fixes: 8de4a1c8164e ("KVM: SVM: Disable (x2)AVIC IPI virtualization if CPU has erratum #1235")
Cc: <stable@vger.kernel.org>
Signed-off-by: Tina Zhang <zhang_wei@open-hieco.net>
Message-ID: <20260522040014.3380201-1-zhang_wei@open-hieco.net>
|
|
When KVM_CAP_X86_APIC_BUS_CYCLES_NS is queried on a specific VM, return the
VM's configured APIC bus frequency, not KVM's default. Aside from the fact
that returning the default frequency is blatantly wrong if userspace has
changed the frequency, returning the configured frequency means userspace
can blindly trust the result, e.g. when filling PV CPUID information that
communicates the APIC bus frequency to the guest.
Fixes: 6fef518594bc ("KVM: x86: Add a capability to configure bus frequency for APIC timer")
Reported-by: David Woodhouse <dwmw2@infradead.org>
Closes: https://lore.kernel.org/all/ab84153e33fbe7c25667f595c56b310d4d5a93ef.camel@infradead.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260522173526.3539407-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Flush the current TLB when xAVIC *or* x2AVIC is activated, as KVM is
(apparently) responsible for purging TLB entries when transitioning from
xAVIC to x2AVIC. The APM says a whole lot of nothing about TLB flushing
with respect to (x2)AVIC, but empirical data strongly suggests hardware
also does a whole lot of nothing.
Failure to flush the TLB when enabling x2AVIC can lead to guest accesses
to the APIC base address getting incorrectly redirected to the virtual
APIC page. The flaw most visibly manifests as failures in KVM-Unit-Test's
verify_disabled_apic_mmio() testcase when x2APIC is enabled (though for
reasons unknown, the test only reliably fails with EFI builds).
Fixes: 0ccf3e7cb95a ("KVM: SVM: Flush the "current" TLB when activating AVIC")
Fixes: 4d1d7942e36a ("KVM: SVM: Introduce logic to (de)activate x2AVIC mode")
Cc: stable@vger.kernel.org
Cc: Naveen N Rao (AMD) <naveen@kernel.org>
Link: https://patch.msgid.link/20260515171536.1841645-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use kvm_register_mark_dirty() instead of kvm_register_is_dirty() to
actually mark VCPU_EXREG_ERAPS as dirty when emulating
INVPCID_TYPE_SINGLE_CTXT. kvm_register_is_dirty() is a read-only
predicate whose return value is discarded, making the call a no-op.
Without this fix, a single-context INVPCID will not trigger a RAP clear
on the next VMRUN, breaking the ERAPS security guarantee.
Fixes: db5e82496492 ("KVM: SVM: Virtualize and advertise support for ERAPS")
Signed-off-by: Emily Ehlert <ehemily@amazon.de>
Link: https://patch.msgid.link/20260518135956.82569-1-ehemily@amazon.de
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Move the VMX interrupt dispatch magic into the x86 core code. This
isolates KVM from the FRED/IDT decisions and reduces the amount of
EXPORT_SYMBOL_FOR_KVM().
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: "Verma, Vishal L" <vishal.l.verma@intel.com>
Tested-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Binbin Wu <binbin.wu@linxu.intel.com>
Acked-by: Sean Christopherson <seanjc@google.com>
Link: https://patch.msgid.link/20260508091829.GO3126523@noisy.programming.kicks-ass.net
|
|
commit 446fcce2a52b ("Revert "x86: kvm: rate-limit global clock updates"")
dropped the rate limiting for KVM_REQ_GLOBAL_CLOCK_UPDATE.
As a result, kvm_arch_vcpu_load() can queue global clock update requests
every time a vCPU is scheduled when the master clock is disabled or when
the vCPU is loaded for the first time.
Restore the throttling with a per-VM ratelimit state and gate
KVM_REQ_GLOBAL_CLOCK_UPDATE through __ratelimit(), so frequent vCPU
scheduling does not generate a steady stream of redundant clock update
requests.
Fixes: 446fcce2a52b ("Revert "x86: kvm: rate-limit global clock updates"")
Signed-off-by: Lei Chen <lei.chen@smartx.com>
Reported-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Closes: https://lore.kernel.org/all/CAK8fFZ5gY8_Mw2A=iZVFNVKQNrXQzVsn-HTd+Me9K6ZfmdgA+Q@mail.gmail.com/
Link: https://patch.msgid.link/20260409142226.2581-1-lei.chen@smartx.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
There have been reports of host hangs caused by CET virtualization.
Until these are analyzed further, introduce a module parameter that
makes it possible to easily disable it.
Link: https://lore.kernel.org/all/85548beb-1486-40f9-beb4-632c78e3360b@proxmox.com/
Cc: David Riley <d.riley@proxmox.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Swap the MOVNTDQA operands, as MOVNTDQA does NOT in fact have "the same
characteristics as 0F E7 (MOVNTDQ)"; MOVNTDQA loads from memory and stores
to registers, while MOVNTDQ loads from registers and stores to memory.
Per the SDM:
MOVNTDQ - Move packed integer values in xmm1 to m128 using non-temporal
hint.
MOVNTDQA - Move double quadword from m128 to xmm1 using non-temporal hint
if WC memory type.
Reported-by: Josh Eads <josheads@google.com>
Fixes: c57d9bafbd0b ("KVM: x86: Add support for emulating MOVNTDQA")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260506213514.2781948-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Except in the case of parentless nested-TDP pages, mmu_page_zap_pte()
clears the SPTE but leaves the invalid_list empty. In this case, using
kvm_flush_remote_tlbs() as kvm_mmu_remote_flush_or_zap() does is overkill.
Avoid flushing the entirety of the remote TLBs unless the invalid_list
was populated: instead, use a more efficient gfn-targeting flush (if
available) and skip it altogether if the caller guarantees that a TLB
flush is not necessary.
Based-on: <20260503201029.106481-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20260503210917.121840-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Never use L0's (KVM's) PAUSE loop exiting controls while L2 is running,
and instead always configure vmcb02 according to L1's exact capabilities
and desires.
The purpose of intercepting PAUSE after N attempts is to detect when the
vCPU may be stuck waiting on a lock, so that KVM can schedule in a
different vCPU that may be holding said lock. Barring a very interesting
setup, L1 and L2 do not share locks, and it's extremely unlikely that an
L1 vCPU would hold a spinlock while running L2. I.e. having a vCPU
executing in L1 yield to a vCPU running in L2 will not allow the L1 vCPU
to make forward progress, and vice versa.
While teaching KVM's "on spin" logic to only yield to other vCPUs in L2 is
doable, in all likelihood it would do more harm than good for most setups.
KVM has limited visibility into which L2 "vCPUs" belong to the same VM,
and thus share a locking domain. And even if L2 vCPUs are in the same
VM, KVM has no visilibity into L2 vCPU's that are scheduled out by the
L1 hypervisor.
Furthermore, KVM doesn't actually steal PAUSE exits from L1. If L1 is
intercepting PAUSE, KVM will route PAUSE exits to L1, not L0, as
nested_svm_intercept() gives priority to the vmcb12 intercept. As such,
overriding the count/threshold fields in vmcb02 with vmcb01's values is
nonsensical, as doing so clobbers all the training/learning that has been
done in L1.
Even worse, if L1 is not intercepting PAUSE, i.e. KVM is handling PAUSE
exits, then KVM will adjust the PLE knobs based on L2 behavior, which could
very well be detrimental to L1, e.g. due to essentially poisoning L1 PLE
training with bad data.
And copying the count from vmcb02 to vmcb01 on a nested VM-Exit makes even
less sense, because again, the purpose of PLE is to detect spinning vCPUs.
Whether or not a vCPU is spinning in L2 at the time of a nested VM-Exit
has no relevance as to the behavior of the vCPU when it executes in L1.
The only scenarios where any of this actually works is if at least one
of KVM or L1 is NOT intercepting PAUSE for the guest. Per the original
changelog, those were the only scenarios considered to be supported.
Disabling KVM's use of PLE makes it so the VM is always in a "supported"
mode.
Last, but certainly not least, using KVM's count/threshold instead of the
values provided by L1 is a blatant violation of the SVM architecture.
Fixes: 74fd41ed16fd ("KVM: x86: nSVM: support PAUSE filtering when L0 doesn't intercept PAUSE")
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://patch.msgid.link/20260508213321.373309-1-seanjc@google.com/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
TRACE_EVENT(kvm_xen_hypercall) stores a5 in __entry->a4 instead of
__entry->a5.
That overwrites the recorded a4 argument and leaves a5 unset in the
trace entry. Fix the typo so both arguments are captured correctly.
Signed-off-by: Qiang Ma <maqianga@uniontech.com>
Link: https://patch.msgid.link/20260512015313.1685784-1-maqianga@uniontech.com/
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The shadow MMU computes GFNs for direct shadow pages using sp->gfn plus
the SPTE index. This assumption breaks for shadow paging if the guest
page tables are modified between VM entries (similar to commit
aad885e77496, "KVM: x86/mmu: Drop/zap existing present SPTE even
when creating an MMIO SPTE", 2026-03-27). The flow is as follows:
- a PDE is installed for a 2MB mapping, and a page in that area is
accessed. KVM creates a kvm_mmu_page consisting of 512 4KB pages;
the kvm_mmu_page is marked by FNAME(fetch) as direct-mapped because
the guest's mapping is a huge page (and thus contiguous).
- the PDE mapping is changed from outside the guest.
- the guest accesses another page in the same 2MB area. KVM installs
a new leaf SPTE and rmap entry; the SPTE uses the "correct" GFN
(i.e. based on the new mapping, as changed in the previous step) but
that GFN is outside of the [sp->gfn, sp->gfn + 511] range; therefore
the rmap entry cannot be found and removed when the kvm_mmu_page
is zapped.
- the memslot that covers the first 2MB mapping is deleted, and the
kvm_mmu_page for the now-invalid GPA is zapped. However, rmap_remove()
only looks at the [sp->gfn, sp->gfn + 511] range established in step 1,
and fails to find the rmap entry that was recorded by step 3.
- any operation that causes an rmap walk for the same page accessed
by step 3 then walks a stale rmap and dereferences a freed kvm_mmu_page.
This includes dirty logging or MMU notifier invalidations (e.g., from
MADV_DONTNEED).
The underlying issue is that KVM's walking of shadow PTEs assumes that
if a SPTE is present when KVM wants to install a non-leaf SPTE, then the
existing kvm_mmu_page must be for the correct gfn. Because the only way
for the gfn to be wrong is if KVM messed up and failed to zap a SPTE...
which shouldn't happen, but *actually* only happens in response to a
guest write.
That bug dates back literally forever, as even the first version of KVM
assumes that the GFN matches and walks into the "wrong" shadow page.
However, that was only an imprecision until 2032a93d66fa ("KVM: MMU:
Don't allocate gfns page for direct mmu pages") came along.
Fix it by checking for a target gfn mismatch and zapping the existing
SPTE. That way the old SP and rmap entries are gone, KVM installs
the rmap in the right location, and everyone is happy.
Fixes: 2032a93d66fa ("KVM: MMU: Don't allocate gfns page for direct mmu pages")
Fixes: 6aa8b732ca01 ("kvm: userspace interface")
Reported-by: Alexander Bulekov <bkov@amazon.com>
Reported-by: Fred Griffoul <fgriffo@amazon.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://patch.msgid.link/20260503201029.106481-1-pbonzini@redhat.com/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Rename kvm_apic_update_irr()'s "irr_updated" and vmx_sync_pir_to_irr()'s
"got_posted_interrupt" to a more accurate "max_irr_is_from_pir", as neither
"irr_updated" nor "got_posted_interrupt" is accurate.
__kvm_apic_update_irr() and thus kvm_apic_update_irr() specifically return
true if and only if the highest priority IRQ, i.e. max_irr, is a "new"
pending IRQ from the PIR. I.e. it's possible for the IRR to be updated,
i.e. for a posted IRQ to be "got", *without* the APIs returning true.
Expand vmx_sync_pir_to_irr()'s comment to explain why it's necessary to
set KVM_REQ_EVENT only if a "new" IRQ was found, and to explain why it's
safe to do so only if a new IRQ is also the highest priority pending IRQ.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://patch.msgid.link/20260503201703.108231-3-pbonzini@redhat.com/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Fall back to apic_find_highest_vector() when PID.ON is set but PIR
turns out to be empty, to correctly report the highest pending interrupt
from the existing IRR.
In a nested VM stress test, the following WARNING fires in
vmx_check_nested_events() when kvm_cpu_has_interrupt() reports a pending
interrupt but the subsequent kvm_apic_has_interrupt() (which invokes
vmx_sync_pir_to_irr() again) returns -1:
WARNING: CPU: 99 PID: 57767 at arch/x86/kvm/vmx/nested.c:4449 vmx_check_nested_events+0x6bf/0x6e0 [kvm_intel]
Call Trace:
kvm_check_and_inject_events
vcpu_enter_guest.constprop.0
vcpu_run
kvm_arch_vcpu_ioctl_run
kvm_vcpu_ioctl
__x64_sys_ioctl
do_syscall_64
entry_SYSCALL_64_after_hwframe
The root cause is a race between vmx_sync_pir_to_irr() on the target vCPU
and __vmx_deliver_posted_interrupt() on a sender vCPU. The sender
performs two individually-atomic operations that are not a single
transaction:
1. pi_test_and_set_pir(vector) -- sets the PIR bit
2. pi_test_and_set_on() -- sets PID.ON
The following interleaving triggers the bug:
Sender vCPU (IPI): Target vCPU (1st sync_pir_to_irr):
B1: set PIR[vector]
A1: pi_clear_on()
A2: pi_harvest_pir() -> sees B1 bit
A3: xchg() -> consumes bit, PIR=0
(1st sync returns correct max_irr)
B2: set PID.ON = 1
Target vCPU (2nd sync_pir_to_irr):
C1: pi_test_on() -> TRUE (from B2)
C2: pi_clear_on() -> ON=0
C3: pi_harvest_pir() -> PIR empty
C4: *max_irr = -1, early return
IRR NOT SCANNED
The interrupt is not lost (it resides in the IRR from the first sync and
is recovered on the next vcpu_enter_guest() iteration), but the incorrect
max_irr causes a spurious WARNING and a wasted L2 VM-Enter/VM-Exit cycle.
Fixes: b41f8638b9d3 ("KVM: VMX: Isolate pure loads from atomic XCHG when processing PIR")
Reported-by: Farrah Chen <farrah.chen@intel.com>
Analyzed-by: Chenyi Qiang <chenyi.qiang@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/kvm/20260428070349.1633238-1-chenyi.qiang@intel.com/T/
Link: https://patch.msgid.link/20260503201703.108231-2-pbonzini@redhat.com/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Checking is_guest_mode(vcpu) is incorrect, because translate_nested_gpa()
is only valid if an L2 guest is running *with nested EPT/NPT enabled*.
Instead use the same condition as translate_nested_gpa() itself.
Cc: stable@vger.kernel.org
Reviewed-by: Sean Christopherson <seanjc@google.com>
Fixes: aee738236dca ("KVM: x86: Prepare kvm_hv_flush_tlb() to handle L2's GPAs", 2022-11-18)
Link: https://patch.msgid.link/20260503200905.106077-1-pbonzini@redhat.com/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pull kvm updates from Paolo Bonzini:
"Arm:
- Add support for tracing in the standalone EL2 hypervisor code,
which should help both debugging and performance analysis. This
uses the new infrastructure for 'remote' trace buffers that can be
exposed by non-kernel entities such as firmware, and which came
through the tracing tree
- Add support for GICv5 Per Processor Interrupts (PPIs), as the
starting point for supporting the new GIC architecture in KVM
- Finally add support for pKVM protected guests, where pages are
unmapped from the host as they are faulted into the guest and can
be shared back from the guest using pKVM hypercalls. Protected
guests are created using a new machine type identifier. As the
elusive guestmem has not yet delivered on its promises, anonymous
memory is also supported
This is only a first step towards full isolation from the host; for
example, the CPU register state and DMA accesses are not yet
isolated. Because this does not really yet bring fully what it
promises, it is hidden behind CONFIG_ARM_PKVM_GUEST +
'kvm-arm.mode=protected', and also triggers TAINT_USER when a VM is
created. Caveat emptor
- Rework the dreaded user_mem_abort() function to make it more
maintainable, reducing the amount of state being exposed to the
various helpers and rendering a substantial amount of state
immutable
- Expand the Stage-2 page table dumper to support NV shadow page
tables on a per-VM basis
- Tidy up the pKVM PSCI proxy code to be slightly less hard to
follow
- Fix both SPE and TRBE in non-VHE configurations so that they do not
generate spurious, out of context table walks that ultimately lead
to very bad HW lockups
- A small set of patches fixing the Stage-2 MMU freeing in error
cases
- Tighten-up accepted SMC immediate value to be only #0 for host
SMCCC calls
- The usual cleanups and other selftest churn
LoongArch:
- Use CSR_CRMD_PLV for kvm_arch_vcpu_in_kernel()
- Add DMSINTC irqchip in kernel support
RISC-V:
- Fix steal time shared memory alignment checks
- Fix vector context allocation leak
- Fix array out-of-bounds in pmu_ctr_read() and pmu_fw_ctr_read_hi()
- Fix double-free of sdata in kvm_pmu_clear_snapshot_area()
- Fix integer overflow in kvm_pmu_validate_counter_mask()
- Fix shift-out-of-bounds in make_xfence_request()
- Fix lost write protection on huge pages during dirty logging
- Split huge pages during fault handling for dirty logging
- Skip CSR restore if VCPU is reloaded on the same core
- Implement kvm_arch_has_default_irqchip() for KVM selftests
- Factored-out ISA checks into separate sources
- Added hideleg to struct kvm_vcpu_config
- Factored-out VCPU config into separate sources
- Support configuration of per-VM HGATP mode from KVM user space
s390:
- Support for ESA (31-bit) guests inside nested hypervisors
- Remove restriction on memslot alignment, which is not needed
anymore with the new gmap code
- Fix LPSW/E to update the bear (which of course is the breaking
event address register)
x86:
- Shut up various UBSAN warnings on reading module parameter before
they were initialized
- Don't zero-allocate page tables that are used for splitting
hugepages in the TDP MMU, as KVM is guaranteed to set all SPTEs in
the page table and thus write all bytes
- As an optimization, bail early when trying to unsync 4KiB mappings
if the target gfn can just be mapped with a 2MiB hugepage
x86 generic:
- Copy single-chunk MMIO write values into struct kvm_vcpu (more
precisely struct kvm_mmio_fragment) to fix use-after-free stack
bugs where KVM would dereference stack pointer after an exit to
userspace
- Clean up and comment the emulated MMIO code to try to make it
easier to maintain (not necessarily "easy", but "easier")
- Move VMXON+VMXOFF and EFER.SVME toggling out of KVM (not *all* of
VMX and SVM enabling) as it is needed for trusted I/O
- Advertise support for AVX512 Bit Matrix Multiply (BMM) instructions
- Immediately fail the build if a required #define is missing in one
of KVM's headers that is included multiple times
- Reject SET_GUEST_DEBUG with -EBUSY if there's an already injected
exception, mostly to prevent syzkaller from abusing the uAPI to
trigger WARNs, but also because it can help prevent userspace from
unintentionally crashing the VM
- Exempt SMM from CPUID faulting on Intel, as per the spec
- Misc hardening and cleanup changes
x86 (AMD):
- Fix and optimize IRQ window inhibit handling for AVIC; make it
per-vCPU so that KVM doesn't prematurely re-enable AVIC if multiple
vCPUs have to-be-injected IRQs
- Clean up and optimize the OSVW handling, avoiding a bug in which
KVM would overwrite state when enabling virtualization on multiple
CPUs in parallel. This should not be a problem because OSVW should
usually be the same for all CPUs
- Drop a WARN in KVM_MEMORY_ENCRYPT_REG_REGION where KVM complains
about a "too large" size based purely on user input
- Clean up and harden the pinning code for KVM_MEMORY_ENCRYPT_REG_REGION
- Disallow synchronizing a VMSA of an already-launched/encrypted
vCPU, as doing so for an SNP guest will crash the host due to an
RMP violation page fault
- Overhaul KVM's APIs for detecting SEV+ guests so that VM-scoped
queries are required to hold kvm->lock, and enforce it by lockdep.
Fix various bugs where sev_guest() was not ensured to be stable for
the whole duration of a function or ioctl
- Convert a pile of kvm->lock SEV code to guard()
- Play nicer with userspace that does not enable
KVM_CAP_EXCEPTION_PAYLOAD, for which KVM needs to set CR2 and DR6
as a response to ioctls such as KVM_GET_VCPU_EVENTS (even if the
payload would end up in EXITINFO2 rather than CR2, for example).
Only set CR2 and DR6 when consumption of the payload is imminent,
but on the other hand force delivery of the payload in all paths
where userspace retrieves CR2 or DR6
- Use vcpu->arch.cr2 when updating vmcb12's CR2 on nested #VMEXIT
instead of vmcb02->save.cr2. The value is out of sync after a
save/restore or after a #PF is injected into L2
- Fix a class of nSVM bugs where some fields written by the CPU are
not synchronized from vmcb02 to cached vmcb12 after VMRUN, and so
are not up-to-date when saved by KVM_GET_NESTED_STATE
- Fix a class of bugs where the ordering between KVM_SET_NESTED_STATE
and KVM_SET_{S}REGS could cause vmcb02 to be incorrectly
initialized after save+restore
- Add a variety of missing nSVM consistency checks
- Fix several bugs where KVM failed to correctly update VMCB fields
on nested #VMEXIT
- Fix several bugs where KVM failed to correctly synthesize #UD or
#GP for SVM-related instructions
- Add support for save+restore of virtualized LBRs (on SVM)
- Refactor various helpers and macros to improve clarity and
(hopefully) make the code easier to maintain
- Aggressively sanitize fields when copying from vmcb12, to guard
against unintentionally allowing L1 to utilize yet-to-be-defined
features
- Fix several bugs where KVM botched rAX legality checks when
emulating SVM instructions. There are remaining issues in that KVM
doesn't handle size prefix overrides for 64-bit guests
- Fail emulation of VMRUN/VMLOAD/VMSAVE if mapping vmcb12 fails
instead of somewhat arbitrarily synthesizing #GP (i.e. don't double
down on AMD's architectural but sketchy behavior of generating #GP
for "unsupported" addresses)
- Cache all used vmcb12 fields to further harden against TOCTOU bugs
x86 (Intel):
- Drop obsolete branch hint prefixes from the VMX instruction macros
- Use ASM_INPUT_RM() in __vmcs_writel() to coerce clang into using a
register input when appropriate
- Code cleanups
guest_memfd:
- Don't mark guest_memfd folios as accessed, as guest_memfd doesn't
support reclaim, the memory is unevictable, and there is no storage
to write back to
LoongArch selftests:
- Add KVM PMU test cases
s390 selftests:
- Enable more memory selftests
x86 selftests:
- Add support for Hygon CPUs in KVM selftests
- Fix a bug in the MSR test where it would get false failures on
AMD/Hygon CPUs with exactly one of RDPID or RDTSCP
- Add an MADV_COLLAPSE testcase for guest_memfd as a regression test
for a bug where the kernel would attempt to collapse guest_memfd
folios against KVM's will"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (373 commits)
KVM: x86: use inlines instead of macros for is_sev_*guest
x86/virt: Treat SVM as unsupported when running as an SEV+ guest
KVM: SEV: Goto an existing error label if charging misc_cg for an ASID fails
KVM: SVM: Move lock-protected allocation of SEV ASID into a separate helper
KVM: SEV: use mutex guard in snp_handle_guest_req()
KVM: SEV: use mutex guard in sev_mem_enc_unregister_region()
KVM: SEV: use mutex guard in sev_mem_enc_ioctl()
KVM: SEV: use mutex guard in snp_launch_update()
KVM: SEV: Assert that kvm->lock is held when querying SEV+ support
KVM: SEV: Document that checking for SEV+ guests when reclaiming memory is "safe"
KVM: SEV: Hide "struct kvm_sev_info" behind CONFIG_KVM_AMD_SEV=y
KVM: SEV: WARN on unhandled VM type when initializing VM
KVM: LoongArch: selftests: Add PMU overflow interrupt test
KVM: LoongArch: selftests: Add basic PMU event counting test
KVM: LoongArch: selftests: Add cpucfg read/write helpers
LoongArch: KVM: Add DMSINTC inject msi to vCPU
LoongArch: KVM: Add DMSINTC device support
LoongArch: KVM: Make vcpu_is_preempted() as a macro rather than function
LoongArch: KVM: Move host CSR_GSTAT save and restore in context switch
LoongArch: KVM: Move host CSR_EENTRY save and restore in context switch
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "maple_tree: Replace big node with maple copy" (Liam Howlett)
Mainly prepararatory work for ongoing development but it does reduce
stack usage and is an improvement.
- "mm, swap: swap table phase III: remove swap_map" (Kairui Song)
Offers memory savings by removing the static swap_map. It also yields
some CPU savings and implements several cleanups.
- "mm: memfd_luo: preserve file seals" (Pratyush Yadav)
File seal preservation to LUO's memfd code
- "mm: zswap: add per-memcg stat for incompressible pages" (Jiayuan
Chen)
Additional userspace stats reportng to zswap
- "arch, mm: consolidate empty_zero_page" (Mike Rapoport)
Some cleanups for our handling of ZERO_PAGE() and zero_pfn
- "mm/kmemleak: Improve scan_should_stop() implementation" (Zhongqiu
Han)
A robustness improvement and some cleanups in the kmemleak code
- "Improve khugepaged scan logic" (Vernon Yang)
Improve khugepaged scan logic and reduce CPU consumption by
prioritizing scanning tasks that access memory frequently
- "Make KHO Stateless" (Jason Miu)
Simplify Kexec Handover by transitioning KHO from an xarray-based
metadata tracking system with serialization to a radix tree data
structure that can be passed directly to the next kernel
- "mm: vmscan: add PID and cgroup ID to vmscan tracepoints" (Thomas
Ballasi and Steven Rostedt)
Enhance vmscan's tracepointing
- "mm: arch/shstk: Common shadow stack mapping helper and
VM_NOHUGEPAGE" (Catalin Marinas)
Cleanup for the shadow stack code: remove per-arch code in favour of
a generic implementation
- "Fix KASAN support for KHO restored vmalloc regions" (Pasha Tatashin)
Fix a WARN() which can be emitted the KHO restores a vmalloc area
- "mm: Remove stray references to pagevec" (Tal Zussman)
Several cleanups, mainly udpating references to "struct pagevec",
which became folio_batch three years ago
- "mm: Eliminate fake head pages from vmemmap optimization" (Kiryl
Shutsemau)
Simplify the HugeTLB vmemmap optimization (HVO) by changing how tail
pages encode their relationship to the head page
- "mm/damon/core: improve DAMOS quota efficiency for core layer
filters" (SeongJae Park)
Improve two problematic behaviors of DAMOS that makes it less
efficient when core layer filters are used
- "mm/damon: strictly respect min_nr_regions" (SeongJae Park)
Improve DAMON usability by extending the treatment of the
min_nr_regions user-settable parameter
- "mm/page_alloc: pcp locking cleanup" (Vlastimil Babka)
The proper fix for a previously hotfixed SMP=n issue. Code
simplifications and cleanups ensued
- "mm: cleanups around unmapping / zapping" (David Hildenbrand)
A bunch of cleanups around unmapping and zapping. Mostly
simplifications, code movements, documentation and renaming of
zapping functions
- "support batched checking of the young flag for MGLRU" (Baolin Wang)
Batched checking of the young flag for MGLRU. It's part cleanups; one
benchmark shows large performance benefits for arm64
- "memcg: obj stock and slab stat caching cleanups" (Johannes Weiner)
memcg cleanup and robustness improvements
- "Allow order zero pages in page reporting" (Yuvraj Sakshith)
Enhance free page reporting - it is presently and undesirably order-0
pages when reporting free memory.
- "mm: vma flag tweaks" (Lorenzo Stoakes)
Cleanup work following from the recent conversion of the VMA flags to
a bitmap
- "mm/damon: add optional debugging-purpose sanity checks" (SeongJae
Park)
Add some more developer-facing debug checks into DAMON core
- "mm/damon: test and document power-of-2 min_region_sz requirement"
(SeongJae Park)
An additional DAMON kunit test and makes some adjustments to the
addr_unit parameter handling
- "mm/damon/core: make passed_sample_intervals comparisons
overflow-safe" (SeongJae Park)
Fix a hard-to-hit time overflow issue in DAMON core
- "mm/damon: improve/fixup/update ratio calculation, test and
documentation" (SeongJae Park)
A batch of misc/minor improvements and fixups for DAMON
- "mm: move vma_(kernel|mmu)_pagesize() out of hugetlb.c" (David
Hildenbrand)
Fix a possible issue with dax-device when CONFIG_HUGETLB=n. Some code
movement was required.
- "zram: recompression cleanups and tweaks" (Sergey Senozhatsky)
A somewhat random mix of fixups, recompression cleanups and
improvements in the zram code
- "mm/damon: support multiple goal-based quota tuning algorithms"
(SeongJae Park)
Extend DAMOS quotas goal auto-tuning to support multiple tuning
algorithms that users can select
- "mm: thp: reduce unnecessary start_stop_khugepaged()" (Breno Leitao)
Fix the khugpaged sysfs handling so we no longer spam the logs with
reams of junk when starting/stopping khugepaged
- "mm: improve map count checks" (Lorenzo Stoakes)
Provide some cleanups and slight fixes in the mremap, mmap and vma
code
- "mm/damon: support addr_unit on default monitoring targets for
modules" (SeongJae Park)
Extend the use of DAMON core's addr_unit tunable
- "mm: khugepaged cleanups and mTHP prerequisites" (Nico Pache)
Cleanups to khugepaged and is a base for Nico's planned khugepaged
mTHP support
- "mm: memory hot(un)plug and SPARSEMEM cleanups" (David Hildenbrand)
Code movement and cleanups in the memhotplug and sparsemem code
- "mm: remove CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE and cleanup
CONFIG_MIGRATION" (David Hildenbrand)
Rationalize some memhotplug Kconfig support
- "change young flag check functions to return bool" (Baolin Wang)
Cleanups to change all young flag check functions to return bool
- "mm/damon/sysfs: fix memory leak and NULL dereference issues" (Josh
Law and SeongJae Park)
Fix a few potential DAMON bugs
- "mm/vma: convert vm_flags_t to vma_flags_t in vma code" (Lorenzo
Stoakes)
Convert a lot of the existing use of the legacy vm_flags_t data type
to the new vma_flags_t type which replaces it. Mainly in the vma
code.
- "mm: expand mmap_prepare functionality and usage" (Lorenzo Stoakes)
Expand the mmap_prepare functionality, which is intended to replace
the deprecated f_op->mmap hook which has been the source of bugs and
security issues for some time. Cleanups, documentation, extension of
mmap_prepare into filesystem drivers
- "mm/huge_memory: refactor zap_huge_pmd()" (Lorenzo Stoakes)
Simplify and clean up zap_huge_pmd(). Additional cleanups around
vm_normal_folio_pmd() and the softleaf functionality are performed.
* tag 'mm-stable-2026-04-13-21-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm: fix deferred split queue races during migration
mm/khugepaged: fix issue with tracking lock
mm/huge_memory: add and use has_deposited_pgtable()
mm/huge_memory: add and use normal_or_softleaf_folio_pmd()
mm: add softleaf_is_valid_pmd_entry(), pmd_to_softleaf_folio()
mm/huge_memory: separate out the folio part of zap_huge_pmd()
mm/huge_memory: use mm instead of tlb->mm
mm/huge_memory: remove unnecessary sanity checks
mm/huge_memory: deduplicate zap deposited table call
mm/huge_memory: remove unnecessary VM_BUG_ON_PAGE()
mm/huge_memory: add a common exit path to zap_huge_pmd()
mm/huge_memory: handle buggy PMD entry in zap_huge_pmd()
mm/huge_memory: have zap_huge_pmd return a boolean, add kdoc
mm/huge: avoid big else branch in zap_huge_pmd()
mm/huge_memory: simplify vma_is_specal_huge()
mm: on remap assert that input range within the proposed VMA
mm: add mmap_action_map_kernel_pages[_full]()
uio: replace deprecated mmap hook with mmap_prepare in uio_info
drivers: hv: vmbus: replace deprecated mmap hook with mmap_prepare
mm: allow handling of stacked mmap_prepare hooks in more drivers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 TDX updates from Dave Hansen:
"The only real thing of note here is printing the TDX module version.
This is a little silly on its own, but the upcoming TDX module update
code needs the same TDX module call. This shrinks that set a wee bit.
There's also few minor macro cleanups and a tweak to the GetQuote ABI
to make it easier for userspace to detect zero-length (failed) quotes"
* tag 'x86_tdx_for_7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
virt: tdx-guest: Return error for GetQuote failures
KVM/TDX: Rename KVM_SUPPORTED_TD_ATTRS to KVM_SUPPORTED_TDX_TD_ATTRS
x86/tdx: Rename TDX_ATTR_* to TDX_TD_ATTR_*
KVM/TDX: Remove redundant definitions of TDX_TD_ATTR_*
x86/tdx: Fix the typo in TDX_ATTR_MIGRTABLE
x86/virt/tdx: Print TDX module version during init
x86/virt/tdx: Retrieve TDX module version
|
|
This helps avoiding more embarrassment to this maintainer, but also
will catch mistakes more easily for others.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM SVM changes for 7.1
- Fix and optimize IRQ window inhibit handling for AVIC (the tracking needs to
be per-vCPU, e.g. so that KVM doesn't prematurely re-enable AVIC if multiple
vCPUs have to-be-injected IRQs).
- Fix an undefined behavior warning where a crafty userspace can read the
"avic" module param before it's fully initialized.
- Fix a (likely benign) bug in the "OS-visible workarounds" handling, where
KVM could clobber state when enabling virtualization on multiple CPUs in
parallel, and clean up and optimize the code.
- Drop a WARN in KVM_MEMORY_ENCRYPT_REG_REGION where KVM complains about a
"too large" size based purely on user input, and clean up and harden the
related pinning code.
- Disallow synchronizing a VMSA of an already-launched/encrypted vCPU, as
doing so for an SNP guest will trigger an RMP violation #PF and crash the
host.
- Protect all of sev_mem_enc_register_region() with kvm->lock to ensure
sev_guest() is stable for the entire of the function.
- Lock all vCPUs when synchronizing VMSAs for SNP guests to ensure the VMSA
page isn't actively being used.
- Overhaul KVM's APIs for detecting SEV+ guests so that VM-scoped queries are
required to hold kvm->lock (KVM has had multiple bugs due "is SEV?" checks
becoming stale), enforced by lockdep. Add and use vCPU-scoped APIs when
possible/appropriate, as all checks that originate from a vCPU are
guaranteed to be stable.
- Convert a pile of kvm->lock SEV code to guard().
|
|
KVM x86 VMXON and EFER.SVME extraction for 7.1
Move _only_ VMXON+VMXOFF and EFER.SVME toggling out of KVM (versus all of VMX
and SVM enabling) out of KVM and into the core kernel so that non-KVM TDX
enabling, e.g. for trusted I/O, can make SEAMCALLs without needing to ensure
KVM is fully loaded.
TIO isn't a hypervisor, and isn't trying to be a hypervisor. Specifically, TIO
should _never_ have it's own VMCSes (that are visible to the host; the
TDX-Module has it's own VMCSes to do SEAMCALL/SEAMRET), and so there is simply
no reason to move that functionality out of KVM.
With that out of the way, dealing with VMXON/VMXOFF and EFER.SVME is a fairly
simple refcounting game.
|
|
KVM nested SVM changes for 7.1 (with one common x86 fix)
- To minimize the probability of corrupting guest state, defer KVM's
non-architectural delivery of exception payloads (e.g. CR2 and DR6) until
consumption of the payload is imminent, and force delivery of the payload
in all paths where userspace saves relevant state.
- Use vcpu->arch.cr2 when updating vmcb12's CR2 on nested #VMEXIT to fix a
bug where L2's CR2 can get corrupted after a save/restore, e.g. if the VM
is migrated while L2 is faulting in memory.
- Fix a class of nSVM bugs where some fields written by the CPU are not
synchronized from vmcb02 to cached vmcb12 after VMRUN, and so are not
up-to-date when saved by KVM_GET_NESTED_STATE.
- Fix a class of bugs where the ordering between KVM_SET_NESTED_STATE and
KVM_SET_{S}REGS could cause vmcb02 to be incorrectly initialized after
save+restore.
- Add a variety of missing nSVM consistency checks.
- Fix several bugs where KVM failed to correctly update VMCB fields on nested
#VMEXIT.
- Fix several bugs where KVM failed to correctly synthesize #UD or #GP for
SVM-related instructions.
- Add support for save+restore of virtualized LBRs (on SVM).
- Refactor various helpers and macros to improve clarity and (hopefully) make
the code easier to maintain.
- Aggressively sanitize fields when copying from vmcb12 to guard against
unintentionally allowing L1 to utilize yet-to-be-defined features.
- Fix several bugs where KVM botched rAX legality checks when emulating SVM
instructions. Note, KVM is still flawed in that KVM doesn't address size
prefix overrides for 64-bit guests; this should probably be documented as a
KVM erratum.
- Fail emulation of VMRUN/VMLOAD/VMSAVE if mapping vmcb12 fails instead of
somewhat arbitrarily synthesizing #GP (i.e. don't bastardize AMD's already-
sketchy behavior of generating #GP if for "unsupported" addresses).
- Cache all used vmcb12 fields to further harden against TOCTOU bugs.
|
|
KVM x86 MMU changes for 7.1
- Fix an undefined behavior warning where a crafty userspace can read kvm.ko's
nx_huge_pages before it's fully initialized.
- Don't zero-allocate page tables that are used for splitting hugepages in the
TDP MMU, as KVM is guaranteed to set all SPTEs in the page table and thus
write all bytes.
- Bail early when trying to unsync 4KiB mappings if the target gfn can be
mapped with a 2MiB hugepage, to avoid the gfn hash lookup.
|
|
KVM VMX changes for 7.1
- Drop obsolete (largely ignored by hardwre) branch hint prefixes from the
VMX instruction macros, as saving a byte of code per instruction provides
more benefits than the (mostly) superfluous prefixes.
- Use ASM_INPUT_RM() in __vmcs_writel() to coerce clang into using a register
input when appropriate.
- Drop unnecessary parentheses in cpu_has_load_cet_ctrl() so as not to suggest
that "return (x & y);" is KVM's preferred style.
|
|
KVM x86 emulated MMIO changes for 7.1
Copy single-chunk MMIO write values into a persistent (per-fragment) field to
fix use-after-free stack bugs due to KVM dereferencing a stack pointer after an
exit to userspace.
Clean up and comment the emulated MMIO code to try to make it easier to
maintain (not necessarily "easy", but "easier").
|
|
KVM x86 misc changes for 7.1
- Advertise support for AVX512 Bit Matrix Multiply (BMM) when it's present in
hardware (no additional emulation/virtualization required).
- Immediately fail the build if a required #define is missing in one of KVM's
headers that is included multiple times.
- Reject SET_GUEST_DEBUG with -EBUSY if there's an already injected exception,
mostly to prevent syzkaller from abusing the uAPI to trigger WARNs, but also
because it can help prevent userspace from unintentionally crashing the VM.
- Exempt SMM from CPUID faulting on Intel, as per the spec.
- Misc hardening and cleanup changes.
|
|
Dedup a small amount of cleanup code in SEV ASID allocation by reusing
an existing error label.
No functional change intended.
Link: https://patch.msgid.link/20260310234829.2608037-22-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Extract the lock-protected parts of SEV ASID allocation into a new helper
and opportunistically convert it to use guard() when acquiring the mutex.
Preserve the goto even though it's a little odd, as it's there's a fair
amount of subtlety that makes it surprisingly difficult to replicate the
functionality with a loop construct, and arguably using goto yields the
most readable code.
No functional change intended.
Signed-off-by: Carlos López <clopez@suse.de>
[sean: move code to separate helper, rework shortlog+changelog]
Link: https://patch.msgid.link/20260310234829.2608037-21-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Simplify the error paths in snp_handle_guest_req() by using a mutex
guard, allowing early return instead of using gotos.
Signed-off-by: Carlos López <clopez@suse.de>
Link: https://patch.msgid.link/20260120201013.3931334-8-clopez@suse.de
Link: https://patch.msgid.link/20260310234829.2608037-20-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Simplify the error paths in sev_mem_enc_unregister_region() by using a
mutex guard, allowing early return instead of using gotos.
Signed-off-by: Carlos López <clopez@suse.de>
Link: https://patch.msgid.link/20260120201013.3931334-7-clopez@suse.de
Link: https://patch.msgid.link/20260310234829.2608037-19-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Simplify the error paths in sev_mem_enc_ioctl() by using a mutex guard,
allowing early return instead of using gotos.
Signed-off-by: Carlos López <clopez@suse.de>
Link: https://patch.msgid.link/20260120201013.3931334-5-clopez@suse.de
Link: https://patch.msgid.link/20260310234829.2608037-18-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
