| Age | Commit message (Collapse) | Author |
|---|
|
Loongson2ef reserves io range below 0x4000 (LOONGSON_PCI_IO_START) while
ISA-mode only IDE controller on the south bridge still has a hard
dependency on ISA IO ports.
The reservation was done by lifting loongson_pci_io_resource.start onto
0x4000. Prior to commit ae81aad5c2e1 ("MIPS: PCI: Use
pci_enable_resources()"), the arch specific pcibios_enable_resources()
did not check if the resources were claimed, which diverges from what
PCI core checks, effectively hiding the fact that IDE IO resources were
not properly within the resource tree. After starting to use
pcibios_enable_resources() from PCI core, enabling IDE controller fails:
pata_cs5536 0000:00:0e.2: BAR 0 [io 0x01f0-0x01f7]: not claimed; can't enable device
pata_cs5536 0000:00:0e.2: probe with driver pata_cs5536 failed with error -22
MIPS PCI code already has support for enforcing lower bounds using
PCIBIOS_MIN_IO in pcibios_align_resource() without altering the IO
window start address itself. Make Loongson2ef PCI code use
PCIBIOS_MIN_IO too.
Fixes: ae81aad5c2e1 ("MIPS: PCI: Use pci_enable_resources()")
Cc: stable@vger.kernel.org
Tested-by: Beiyan Yun <root@infi.wang>
Tested-by: Yao Zi <me@ziyao.cc>
Signed-off-by: Rong Zhang <rongrong@oss.cipunited.com>
Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
We are about to set loongson_pci_io_resource.start to 0 and adopt
PCIBIOS_MIN_IO. As the first step, PCI controller needs to be registered
in early stage to make it the root of other resources (e.g., i8259) and
prevent resource conflicts.
Register it in plat_mem_setup() instead of arch_initcall().
Fixes: ae81aad5c2e1 ("MIPS: PCI: Use pci_enable_resources()")
Cc: stable@vger.kernel.org
Tested-by: Beiyan Yun <root@infi.wang>
Tested-by: Yao Zi <me@ziyao.cc>
Signed-off-by: Rong Zhang <rongrong@oss.cipunited.com>
Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Update to avoid conflicts with /urgent patches.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
|
|
R_MIPS_PC32 is a GNU extension, its definition is available in glibc
only since 2.39 (released in 2024), and not available in musl libc yet.
Provide our own definition for R_MIPS_PC32 and use it if necessary to
fix relocs tool building on musl and older glibc systems.
Fixes: ff79d31eb536 ("mips: Add support for PC32 relocations in vmlinux")
Signed-off-by: Yao Zi <me@ziyao.cc>
Link: https://patch.msgid.link/20260202041610.61389-1-me@ziyao.cc
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
|
|
Currently the LS7A GMAC device tree node lacks a proper phy-handle
property pointing to the PHY node.
In addition, the phy-mode property specifies "rgmii" without any
internal delay information, which means the board trace needs to add 2ns
delay to the RGMII data lines; but that isn't known to happen on any
Loongson board. The ACPI-based initialization codepath, which is used on
LoongArch-based 3A5000 + 7A1000 hardwares, specifies "rgmii-id" phy
mode, which should be the one we are using.
Add the lacking phy-handle property and set proper phy-mode.
Tested on a LS3A4000_7A1000_NUC_BOARD_V2.1 board with YT8521S PHY.
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
All users of the MIPS pic32.h asm header have been migrated to
linux/platform_data/pic32.h, so let's go ahead and drop the unused asm
variant.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Use the linux/platform_data/pic32.h include instead of
asm/mach-pic32/pic32.h so that the asm variant can be dropped. This
is in preparation for allowing some drivers to be compiled on other
architectures with COMPILE_TEST enabled.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The linux/io.h include is not used, so let's drop it from pic32.h.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The pic32.h header file currently includes linux/io.h, however that
header is not actually used. The only header that's needed by this
C file is linux/types.h. Let's include it so that linux/io.h can be
dropped.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The pic32.h header includes linux/io.h, however nothing from that
include file is directly used by pic32.h. Several C files that
include pic32.h indirectly depend on linux/io.h, so let's go ahead
and add the missing include so that linux/io.h can be dropped from
pic32.h.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
CPU_HAS_LOAD_STORE_LR is not used anywhere in the kernel sources,
so drop it.
Fixes: 85c4354076ca ("MIPS: loongson32: Switch to generic core")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Keguang Zhang <keguang.zhang@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The arch definition of cpumask_of_node() cannot handle NUMA_NO_NODE - which
is a valid index - so add a check for this.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The s2io driver supports Exar (formerly Neterion and S2io) PCI-X 10
Gigabit Ethernet cards. Hardware supporting PCI-X has not been
manufactured in years. On x86, it was quickly replaced by PCIe. While
it stuck around longer on POWER hardware, the last POWER hardware to
support it was POWER7, which is not supported by ppc64le Linux
distributions. The last supported mainstream ppc64 Linux distribution
was RHEL 7; while it is still supported under ELS, ELS is only
available for x86 and IBM Z. It is possible to use many PCI-X cards in
standard PCI slots (which are still available on new motherboards), but
it does not make sense to do so for 10 Gigabit Ethernet because the
maximum bandwidth of standard PCI is only 1067 Mbps. It is therefore
highly unlikely that this driver is still being used. Remove the
driver, and move the former maintainer to the CREDITS file (restoring
credit for the vxge driver, which was removed in commit f05643a0f60b
("eth: remove neterion/vxge").
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260126031352.22997-1-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All three variants of paging_init() on MIPS are wrappers for
pagetable_init().
Instead of having three identical wrappers, call pagetable_init() directly
from setup_arch() and remove the unnecessary paging_init() functions.
Link: https://lkml.kernel.org/r/20260111082105.290734-26-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Magnus Lindholm <linmag7@gmail.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Pratyush Yadav <pratyush@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Every architecture calls sparse_init() during setup_arch() although the
data structures created by sparse_init() are not used until the
initialization of the core MM.
Beside the code duplication, calling sparse_init() from architecture
specific code causes ordering differences of vmemmap and HVO
initialization on different architectures.
Move the call to sparse_init() from architecture specific code to
free_area_init() to ensure that vmemmap and HVO initialization order is
always the same.
Link: https://lkml.kernel.org/r/20260111082105.290734-25-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Magnus Lindholm <linmag7@gmail.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Pratyush Yadav <pratyush@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
To initialize node, zone and memory map data structures every architecture
calls free_area_init() during setup_arch() and passes it an array of zone
limits.
Beside code duplication it creates "interesting" ordering cases between
allocation and initialization of hugetlb and the memory map. Some
architectures allocate hugetlb pages very early in setup_arch() in certain
cases, some only create hugetlb CMA areas in setup_arch() and sometimes
hugetlb allocations happen mm_core_init().
With arch_zone_limits_init() helper available now on all architectures it
is no longer necessary to call free_area_init() from architecture setup
code. Rather core MM initialization can call arch_zone_limits_init() in a
single place.
This allows to unify ordering of hugetlb vs memory map allocation and
initialization.
Remove the call to free_area_init() from architecture specific code and
place it in a new mm_core_init_early() function that is called immediately
after setup_arch().
After this refactoring it is possible to consolidate hugetlb allocations
and eliminate differences in ordering of hugetlb and memory map
initialization among different architectures.
As the first step of this consolidation move hugetlb_bootmem_alloc() to
mm_core_early_init().
Link: https://lkml.kernel.org/r/20260111082105.290734-24-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Magnus Lindholm <linmag7@gmail.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Pratyush Yadav <pratyush@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Move calculations of zone limits to a dedicated arch_zone_limits_init()
function.
Later MM core will use this function as an architecture specific callback
during nodes and zones initialization and thus there won't be a need to
call free_area_init() from every architecture.
Link: https://lkml.kernel.org/r/20260111082105.290734-12-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Magnus Lindholm <linmag7@gmail.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Pratyush Yadav <pratyush@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.19-rc7).
Conflicts:
drivers/net/ethernet/huawei/hinic3/hinic3_irq.c
b35a6fd37a00 ("hinic3: Add adaptive IRQ coalescing with DIM")
fb2bb2a1ebf7 ("hinic3: Fix netif_queue_set_napi queue_index input parameter error")
https://lore.kernel.org/fc0a7fdf08789a52653e8ad05281a0a849e79206.1768915707.git.zhuyikai1@h-partners.com
drivers/net/wireless/ath/ath12k/mac.c
drivers/net/wireless/ath/ath12k/wifi7/hw.c
31707572108d ("wifi: ath12k: Fix wrong P2P device link id issue")
c26f294fef2a ("wifi: ath12k: Move ieee80211_ops callback to the arch specific module")
https://lore.kernel.org/20260114123751.6a208818@canb.auug.org.au
Adjacent changes:
drivers/net/wireless/ath/ath12k/mac.c
8b8d6ee53dfd ("wifi: ath12k: Fix scan state stuck in ABORTING after cancel_remain_on_channel")
914c890d3b90 ("wifi: ath12k: Add framework for hardware specific ieee80211_ops registration")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MIPS supports PC32 relocations like most other architectures, which will
be used by kallsyms to make its symbol references visible to the linker.
Given that these are place-relative, they can be ignored by the 'relocs'
tool, just like other PC type relocations.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20260116093359.2442297-5-ardb+git@google.com
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
|
|
Provide a new syscall which has the only purpose to yield the CPU after the
kernel granted a time slice extension.
sched_yield() is not suitable for that because it unconditionally
schedules, but the end of the time slice extension is not required to
schedule when the task was already preempted. This also allows to have a
strict check for termination to catch user space invoking random syscalls
including sched_yield() from a time slice extension region.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251215155708.929634896@linutronix.de
|
|
Remove <linux/hex.h> from <linux/kernel.h> and update all users/callers of
hex.h interfaces to directly #include <linux/hex.h> as part of the process
of putting kernel.h on a diet.
Removing hex.h from kernel.h means that 36K C source files don't have to
pay the price of parsing hex.h for the roughly 120 C source files that
need it.
This change has been build-tested with allmodconfig on most ARCHes. Also,
all users/callers of <linux/hex.h> in the entire source tree have been
updated if needed (if not already #included).
Link: https://lkml.kernel.org/r/20251215005206.2362276-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm: folio_zero_user: clear page ranges", v11.
This series adds clearing of contiguous page ranges for hugepages.
The series improves on the current discontiguous clearing approach in two
ways:
- clear pages in a contiguous fashion.
- use batched clearing via clear_pages() wherever exposed.
The first is useful because it allows us to make much better use of
hardware prefetchers.
The second, enables advertising the real extent to the processor. Where
specific instructions support it (ex. string instructions on x86; "mops"
on arm64 etc), a processor can optimize based on this because, instead of
seeing a sequence of 8-byte stores, or a sequence of 4KB pages, it sees a
larger unit being operated on.
For instance, AMD Zen uarchs (for extents larger than LLC-size) switch to
a mode where they start eliding cacheline allocation. This is helpful not
just because it results in higher bandwidth, but also because now the
cache is not evicting useful cachelines and replacing them with zeroes.
Demand faulting a 64GB region shows performance improvement:
$ perf bench mem mmap -p $pg-sz -f demand -s 64GB -l 5
baseline +series
(GBps +- %stdev) (GBps +- %stdev)
pg-sz=2MB 11.76 +- 1.10% 25.34 +- 1.18% [*] +115.47% preempt=*
pg-sz=1GB 24.85 +- 2.41% 39.22 +- 2.32% + 57.82% preempt=none|voluntary
pg-sz=1GB (similar) 52.73 +- 0.20% [#] +112.19% preempt=full|lazy
[*] This improvement is because switching to sequential clearing
allows the hardware prefetchers to do a much better job.
[#] For pg-sz=1GB a large part of the improvement is because of the
cacheline elision mentioned above. preempt=full|lazy improves upon
that because, not needing explicit invocations of cond_resched() to
ensure reasonable preemption latency, it can clear the full extent
as a single unit. In comparison the maximum extent used for
preempt=none|voluntary is PROCESS_PAGES_NON_PREEMPT_BATCH (32MB).
When provided the full extent the processor forgoes allocating
cachelines on this path almost entirely.
(The hope is that eventually, in the fullness of time, the lazy
preemption model will be able to do the same job that none or
voluntary models are used for, allowing us to do away with
cond_resched().)
Raghavendra also tested previous version of the series on AMD Genoa and
sees similar improvement [1] with preempt=lazy.
$ perf bench mem map -p $page-size -f populate -s 64GB -l 10
base patched change
pg-sz=2MB 12.731939 GB/sec 26.304263 GB/sec 106.6%
pg-sz=1GB 26.232423 GB/sec 61.174836 GB/sec 133.2%
This patch (of 8):
Let's drop all variants that effectively map to clear_page() and provide
it in a generic variant instead.
We'll use the macro clear_user_page to indicate whether an architecture
provides it's own variant.
Also, clear_user_page() is only called from the generic variant of
clear_user_highpage(), so define it only if the architecture does not
provide a clear_user_highpage(). And, for simplicity define it in
linux/highmem.h.
Note that for parisc, clear_page() and clear_user_page() map to
clear_page_asm(), so we can just get rid of the custom clear_user_page()
implementation. There is a clear_user_page_asm() function on parisc, that
seems to be unused. Not sure what's up with that.
Link: https://lkml.kernel.org/r/20260107072009.1615991-1-ankur.a.arora@oracle.com
Link: https://lkml.kernel.org/r/20260107072009.1615991-2-ankur.a.arora@oracle.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Co-developed-by: Ankur Arora <ankur.a.arora@oracle.com>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ankur Arora <ankur.a.arora@oracle.com>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Konrad Rzessutek Wilk <konrad.wilk@oracle.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Li Zhe <lizhe.67@bytedance.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raghavendra K T <raghavendra.kt@amd.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
HIPPI has not been relevant for over two decades. It was rapidly
eclipsed by Fibre Channel, and even when it was new, it was
confined to very high-end hardware. The HIPPI code has only
received tree-wide changes and fixes by inspection in the entire
Git history. Remove HIPPI support and the rrunner HIPPI driver,
and move the former maintainer to the CREDITS file. Keep the
include/uapi/linux/if_hippi.h header because it is used by the TUN
code, and to avoid breaking userspace, however unlikely that may be.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260119022451.22344-1-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This legacy platform driver was used with some Qong board.
Support for this board was removed with
commit c93197b0041d ("ARM: imx: Remove i.MX31 board files")
in 2020. So remove this now orphaned driver.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/cef7c728-28ee-439f-b747-eb1c9394fe51@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 6faea3422e3b ("arch, mm: streamline HIGHMEM freeing") overzealously
removed mem_init_free_highmem() function that beside freeing high memory
pages checked for CPU support for high memory as a prerequisite.
Partially restore mem_init_free_highmem() with a new highmem_init() name
and make it discard high memory in case there is no CPU support for it.
Link: https://lkml.kernel.org/r/20251231105701.519711-1-rppt@kernel.org
Fixes: 6faea3422e3b ("arch, mm: streamline HIGHMEM freeing")
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reported-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Jonas Jelonek <jelonek.jonas@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
For consistency with __vdso_clock_gettime64() there should also be a
64-bit variant of clock_getres(). This will allow the extension of
CONFIG_COMPAT_32BIT_TIME to the vDSO and finally the removal of 32-bit
time types from the kernel and UAPI.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20251223-vdso-compat-time32-v1-9-97ea7a06a543@linutronix.de
|
|
Stop definining these privately and instead move them to the uapi
errno.h so that they become canonical instead of copy pasta.
Cc: linux-api@vger.kernel.org
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/176826402587.3490369.17659117524205214600.stgit@frogsfrogsfrogs
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Remove KVM's internal pseudo-overlay of kvm_stats_desc, which subtly
aliases the flexible name[] in the uAPI definition with a fixed-size array
of the same name. The unusual embedded structure results in compiler
warnings due to -Wflex-array-member-not-at-end, and also necessitates an
extra level of dereferencing in KVM. To avoid the "overlay", define the
uAPI structure to have a fixed-size name when building for the kernel.
Opportunistically clean up the indentation for the stats macros, and
replace spaces with tabs.
No functional change intended.
Reported-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Closes: https://lore.kernel.org/all/aPfNKRpLfhmhYqfP@kspp
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
[..]
Acked-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/20251205232655.445294-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Replace deprecated kmap_atomic() with kmap_local_page().
Signed-off-by: Keke Ming <ming.jvle@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Link: https://patch.msgid.link/20260103084243.195125-4-ming.jvle@gmail.com
|
|
Teach the SGI IP27 timer about request_percpu_irq(), which ultimately will
allow for the removal of the antiquated setup_percpu_irq() API.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251210082242.360936-5-maz@kernel.org
|
|
Teach the SGI IP30 timer about request_percpu_irq(), which ultimately will
allow for the removal of the antiquated setup_percpu_irq() API.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251210082242.360936-4-maz@kernel.org
|
|
If gio_device_register fails, gio_dev_put() is required to
drop the gio_dev device reference.
Fixes: e84de0c61905 ("MIPS: GIO bus support for SGI IP22/28")
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The recent io_remap_pfn_range() rework applied the static and inline
specifiers to the implementation of io_remap_pfn_range_pfn() on MIPS
Alchemy, mirroring the same change on other platforms. However, this
function is defined in a source file and that definition causes a
conflict with its declaration. Fix this by dropping the specifiers.
Fixes: c707a68f9468 ("mm: abstract io_remap_pfn_range() based on PFN")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The only slightly large change is the enablement of CIX HD-audio
controller, which took a bit time to be cooked up, while most of other
changes are device-specific small trivial fixes:
- Default disablement of the kconfig for decades old pre-release
alsa-lib PCM API; it's only the default config value change, so it
can't lead to any regressions for the existing setups
- Support for CIX HD-audio controller
- A few ASoC ACP fixes
- Fixes for ASoC cirrus, bcm, wcd, qcom, ak platforms
- Trivial hardening for FireWire and USB-audio
- HD-audio Intel binding fix and quirks"
* tag 'sound-fix-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
ALSA: hda/tas2781: Add new quirk for HP new project
ALSA: hda: cix-ipbloq: Use modern PM ops
ALSA: hda: intel-dsp-config: Prefer legacy driver as fallback
ASoC: amd: acp: update tdm channels for specific DAI
ASoC: cs35l56: Fix incorrect select SND_SOC_CS35L56_CAL_SYSFS_COMMON
ALSA: firewire-motu: add bounds check in put_user loop for DSP events
ASoC: cs35l41: Always return 0 when a subsystem ID is found
ALSA: uapi: Fix typo in asound.h comment
ALSA: Do not build obsolete API
ALSA: hda: add CIX IPBLOQ HDA controller support
ALSA: hda/core: add addr_offset field for bus address translation
ALSA: hda: dt-bindings: add CIX IPBLOQ HDA controller support
ALSA: hda/realtek: Add support for ASUS UM3406GA
ALSA: hda/realtek: Add support for HP Turbine Laptops
ALSA: usb-audio: Initialize status1 to fix uninitialized symbol errors
ALSA: firewire-motu: fix buffer overflow in hwdep read for DSP events
ALSA: hda: cs35l41: Fix NULL pointer dereference in cs35l41_hda_read_acpi()
ASoC: cros_ec_codec: Remove unnecessary selection of CRYPTO
ASoc: qcom: q6afe: fix bad guard conversion
ASoC: rockchip: Fix Wvoid-pointer-to-enum-cast warning (again)
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
"Just cleanups and fixes"
* tag 'mips_6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Fix whitespace damage in r4k_wait from VS timer fix
mips: kvm: simplify kvm_mips_deliver_interrupts()
MIPS: alchemy: mtx1: switch to static device properties
mips: Remove __GFP_HIGHMEM masking
MIPS: ftrace: Fix memory corruption when kernel is located beyond 32 bits
MIPS: dts: Always descend vendor subdirectories
mips: configs: loongson1: Update defconfig
MIPS: Fix HOTPLUG_PARALLEL dependency
|
|
ALSA 0.9.0-rc3 is from 2002, 23 years old.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Acked-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251203-old-alsa-v1-1-ac80704f52c3@ixit.cz
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here is the big set of tty/serial driver changes for 6.19-rc1. Nothing
major at all, just small constant churn to make the tty layer
"cleaner" as well as serial driver updates and even a new test added!
Included in here are:
- More tty/serial cleanups from Jiri
- tty tiocsti test added to hopefully ensure we don't regress in this
area again
- sc16is7xx driver updates
- imx serial driver updates
- 8250 driver updates
- new hardware device ids added
- other minor serial/tty driver cleanups and tweaks
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (60 commits)
serial: sh-sci: Fix deadlock during RSCI FIFO overrun error
dt-bindings: serial: rsci: Drop "uart-has-rtscts: false"
LoongArch: dts: Add uart new compatible string
serial: 8250: Add Loongson uart driver support
dt-bindings: serial: 8250: Add Loongson uart compatible
serial: 8250: add driver for KEBA UART
serial: Keep rs485 settings for devices without firmware node
serial: qcom-geni: Enable Serial on SA8255p Qualcomm platforms
serial: qcom-geni: Enable PM runtime for serial driver
serial: sprd: Return -EPROBE_DEFER when uart clock is not ready
tty: serial: samsung: Declare earlycon for Exynos850
serial: icom: Convert PCIBIOS_* return codes to errnos
serial: 8250-of: Fix style issues in 8250_of.c
serial: add support of CPCI cards
serial: mux: Fix kernel doc for mux_poll()
tty: replace use of system_unbound_wq with system_dfl_wq
serial: 8250_platform: simplify IRQF_SHARED handling
serial: 8250: make share_irqs local to 8250_platform
serial: 8250: move skip_txen_test to core
serial: drop SERIAL_8250_DEPRECATED_OPTIONS
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping updates from Marek Szyprowski:
- More DMA mapping API refactoring to physical addresses as the primary
interface instead of page+offset parameters.
This time dma_map_ops callbacks are converted to physical addresses,
what in turn results also in some simplification of architecture
specific code (Leon Romanovsky and Jason Gunthorpe)
- Clarify that dma_map_benchmark is not a kernel self-test, but
standalone tool (Qinxin Xia)
* tag 'dma-mapping-6.19-2025-12-05' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-mapping: remove unused map_page callback
xen: swiotlb: Convert mapping routine to rely on physical address
x86: Use physical address for DMA mapping
sparc: Use physical address DMA mapping
powerpc: Convert to physical address DMA mapping
parisc: Convert DMA map_page to map_phys interface
MIPS/jazzdma: Provide physical address directly
alpha: Convert mapping routine to rely on physical address
dma-mapping: remove unused mapping resource callbacks
xen: swiotlb: Switch to physical address mapping callbacks
ARM: dma-mapping: Switch to physical address mapping callbacks
ARM: dma-mapping: Reduce struct page exposure in arch_sync_dma*()
dma-mapping: convert dummy ops to physical address mapping
dma-mapping: prepare dma_map_ops to conversion to physical address
tools/dma: move dma_map_benchmark from selftests to tools/dma
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"This is the first half of the driver changes:
- A treewide interface change to the "syscore" operations for power
management, as a preparation for future Tegra specific changes
- Reset controller updates with added drivers for LAN969x, eic770 and
RZ/G3S SoCs
- Protection of system controller registers on Renesas and Google
SoCs, to prevent trivially triggering a system crash from e.g.
debugfs access
- soc_device identification updates on Nvidia, Exynos and Mediatek
- debugfs support in the ST STM32 firewall driver
- Minor updates for SoC drivers on AMD/Xilinx, Renesas, Allwinner, TI
- Cleanups for memory controller support on Nvidia and Renesas"
* tag 'soc-drivers-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (114 commits)
memory: tegra186-emc: Fix missing put_bpmp
Documentation: reset: Remove reset_controller_add_lookup()
reset: fix BIT macro reference
reset: rzg2l-usbphy-ctrl: Fix a NULL vs IS_ERR() bug in probe
reset: th1520: Support reset controllers in more subsystems
reset: th1520: Prepare for supporting multiple controllers
dt-bindings: reset: thead,th1520-reset: Add controllers for more subsys
dt-bindings: reset: thead,th1520-reset: Remove non-VO-subsystem resets
reset: remove legacy reset lookup code
clk: davinci: psc: drop unused reset lookup
reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S SoC
reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY
dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support
reset: eswin: Add eic7700 reset driver
dt-bindings: reset: eswin: Documentation for eic7700 SoC
reset: sparx5: add LAN969x support
dt-bindings: reset: microchip: Add LAN969x support
soc: rockchip: grf: Add select correct PWM implementation on RK3368
soc/tegra: pmc: Add USB wake events for Tegra234
amba: tegra-ahb: Fix device leak on SMMU enable
...
|
|
Pull KVM updates from Paolo Bonzini:
"ARM:
- Support for userspace handling of synchronous external aborts
(SEAs), allowing the VMM to potentially handle the abort in a
non-fatal manner
- Large rework of the VGIC's list register handling with the goal of
supporting more active/pending IRQs than available list registers
in hardware. In addition, the VGIC now supports EOImode==1 style
deactivations for IRQs which may occur on a separate vCPU than the
one that acked the IRQ
- Support for FEAT_XNX (user / privileged execute permissions) and
FEAT_HAF (hardware update to the Access Flag) in the software page
table walkers and shadow MMU
- Allow page table destruction to reschedule, fixing long
need_resched latencies observed when destroying a large VM
- Minor fixes to KVM and selftests
Loongarch:
- Get VM PMU capability from HW GCFG register
- Add AVEC basic support
- Use 64-bit register definition for EIOINTC
- Add KVM timer test cases for tools/selftests
RISC/V:
- SBI message passing (MPXY) support for KVM guest
- Give a new, more specific error subcode for the case when in-kernel
AIA virtualization fails to allocate IMSIC VS-file
- Support KVM_DIRTY_LOG_INITIALLY_SET, enabling dirty log gradually
in small chunks
- Fix guest page fault within HLV* instructions
- Flush VS-stage TLB after VCPU migration for Andes cores
s390:
- Always allocate ESCA (Extended System Control Area), instead of
starting with the basic SCA and converting to ESCA with the
addition of the 65th vCPU. The price is increased number of exits
(and worse performance) on z10 and earlier processor; ESCA was
introduced by z114/z196 in 2010
- VIRT_XFER_TO_GUEST_WORK support
- Operation exception forwarding support
- Cleanups
x86:
- Skip the costly "zap all SPTEs" on an MMIO generation wrap if MMIO
SPTE caching is disabled, as there can't be any relevant SPTEs to
zap
- Relocate a misplaced export
- Fix an async #PF bug where KVM would clear the completion queue
when the guest transitioned in and out of paging mode, e.g. when
handling an SMI and then returning to paged mode via RSM
- Leave KVM's user-return notifier registered even when disabling
virtualization, as long as kvm.ko is loaded. On reboot/shutdown,
keeping the notifier registered is ok; the kernel does not use the
MSRs and the callback will run cleanly and restore host MSRs if the
CPU manages to return to userspace before the system goes down
- Use the checked version of {get,put}_user()
- Fix a long-lurking bug where KVM's lack of catch-up logic for
periodic APIC timers can result in a hard lockup in the host
- Revert the periodic kvmclock sync logic now that KVM doesn't use a
clocksource that's subject to NTP corrections
- Clean up KVM's handling of MMIO Stale Data and L1TF, and bury the
latter behind CONFIG_CPU_MITIGATIONS
- Context switch XCR0, XSS, and PKRU outside of the entry/exit fast
path; the only reason they were handled in the fast path was to
paper of a bug in the core #MC code, and that has long since been
fixed
- Add emulator support for AVX MOV instructions, to play nice with
emulated devices whose guest drivers like to access PCI BARs with
large multi-byte instructions
x86 (AMD):
- Fix a few missing "VMCB dirty" bugs
- Fix the worst of KVM's lack of EFER.LMSLE emulation
- Add AVIC support for addressing 4k vCPUs in x2AVIC mode
- Fix incorrect handling of selective CR0 writes when checking
intercepts during emulation of L2 instructions
- Fix a currently-benign bug where KVM would clobber SPEC_CTRL[63:32]
on VMRUN and #VMEXIT
- Fix a bug where KVM corrupt the guest code stream when re-injecting
a soft interrupt if the guest patched the underlying code after the
VM-Exit, e.g. when Linux patches code with a temporary INT3
- Add KVM_X86_SNP_POLICY_BITS to advertise supported SNP policy bits
to userspace, and extend KVM "support" to all policy bits that
don't require any actual support from KVM
x86 (Intel):
- Use the root role from kvm_mmu_page to construct EPTPs instead of
the current vCPU state, partly as worthwhile cleanup, but mostly to
pave the way for tracking per-root TLB flushes, and elide EPT
flushes on pCPU migration if the root is clean from a previous
flush
- Add a few missing nested consistency checks
- Rip out support for doing "early" consistency checks via hardware
as the functionality hasn't been used in years and is no longer
useful in general; replace it with an off-by-default module param
to WARN if hardware fails a check that KVM does not perform
- Fix a currently-benign bug where KVM would drop the guest's
SPEC_CTRL[63:32] on VM-Enter
- Misc cleanups
- Overhaul the TDX code to address systemic races where KVM (acting
on behalf of userspace) could inadvertantly trigger lock contention
in the TDX-Module; KVM was either working around these in weird,
ugly ways, or was simply oblivious to them (though even Yan's
devilish selftests could only break individual VMs, not the host
kernel)
- Fix a bug where KVM could corrupt a vCPU's cpu_list when freeing a
TDX vCPU, if creating said vCPU failed partway through
- Fix a few sparse warnings (bad annotation, 0 != NULL)
- Use struct_size() to simplify copying TDX capabilities to userspace
- Fix a bug where TDX would effectively corrupt user-return MSR
values if the TDX Module rejects VP.ENTER and thus doesn't clobber
host MSRs as expected
Selftests:
- Fix a math goof in mmu_stress_test when running on a single-CPU
system/VM
- Forcefully override ARCH from x86_64 to x86 to play nice with
specifying ARCH=x86_64 on the command line
- Extend a bunch of nested VMX to validate nested SVM as well
- Add support for LA57 in the core VM_MODE_xxx macro, and add a test
to verify KVM can save/restore nested VMX state when L1 is using
5-level paging, but L2 is not
- Clean up the guest paging code in anticipation of sharing the core
logic for nested EPT and nested NPT
guest_memfd:
- Add NUMA mempolicy support for guest_memfd, and clean up a variety
of rough edges in guest_memfd along the way
- Define a CLASS to automatically handle get+put when grabbing a
guest_memfd from a memslot to make it harder to leak references
- Enhance KVM selftests to make it easer to develop and debug
selftests like those added for guest_memfd NUMA support, e.g. where
test and/or KVM bugs often result in hard-to-debug SIGBUS errors
- Misc cleanups
Generic:
- Use the recently-added WQ_PERCPU when creating the per-CPU
workqueue for irqfd cleanup
- Fix a goof in the dirty ring documentation
- Fix choice of target for directed yield across different calls to
kvm_vcpu_on_spin(); the function was always starting from the first
vCPU instead of continuing the round-robin search"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (260 commits)
KVM: arm64: at: Update AF on software walk only if VM has FEAT_HAFDBS
KVM: arm64: at: Use correct HA bit in TCR_EL2 when regime is EL2
KVM: arm64: Document KVM_PGTABLE_PROT_{UX,PX}
KVM: arm64: Fix spelling mistake "Unexpeced" -> "Unexpected"
KVM: arm64: Add break to default case in kvm_pgtable_stage2_pte_prot()
KVM: arm64: Add endian casting to kvm_swap_s[12]_desc()
KVM: arm64: Fix compilation when CONFIG_ARM64_USE_LSE_ATOMICS=n
KVM: arm64: selftests: Add test for AT emulation
KVM: arm64: nv: Expose hardware access flag management to NV guests
KVM: arm64: nv: Implement HW access flag management in stage-2 SW PTW
KVM: arm64: Implement HW access flag management in stage-1 SW PTW
KVM: arm64: Propagate PTW errors up to AT emulation
KVM: arm64: Add helper for swapping guest descriptor
KVM: arm64: nv: Use pgtable definitions in stage-2 walk
KVM: arm64: Handle endianness in read helper for emulated PTW
KVM: arm64: nv: Stop passing vCPU through void ptr in S2 PTW
KVM: arm64: Call helper for reading descriptors directly
KVM: arm64: nv: Advertise support for FEAT_XNX
KVM: arm64: Teach ptdump about FEAT_XNX permissions
KVM: s390: Use generic VIRT_XFER_TO_GUEST_WORK functions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"__vmalloc()/kvmalloc() and no-block support" (Uladzislau Rezki)
Rework the vmalloc() code to support non-blocking allocations
(GFP_ATOIC, GFP_NOWAIT)
"ksm: fix exec/fork inheritance" (xu xin)
Fix a rare case where the KSM MMF_VM_MERGE_ANY prctl state is not
inherited across fork/exec
"mm/zswap: misc cleanup of code and documentations" (SeongJae Park)
Some light maintenance work on the zswap code
"mm/page_owner: add debugfs files 'show_handles' and 'show_stacks_handles'" (Mauricio Faria de Oliveira)
Enhance the /sys/kernel/debug/page_owner debug feature by adding
unique identifiers to differentiate the various stack traces so
that userspace monitoring tools can better match stack traces over
time
"mm/page_alloc: pcp->batch cleanups" (Joshua Hahn)
Minor alterations to the page allocator's per-cpu-pages feature
"Improve UFFDIO_MOVE scalability by removing anon_vma lock" (Lokesh Gidra)
Address a scalability issue in userfaultfd's UFFDIO_MOVE operation
"kasan: cleanups for kasan_enabled() checks" (Sabyrzhan Tasbolatov)
"drivers/base/node: fold node register and unregister functions" (Donet Tom)
Clean up the NUMA node handling code a little
"mm: some optimizations for prot numa" (Kefeng Wang)
Cleanups and small optimizations to the NUMA allocation hinting
code
"mm/page_alloc: Batch callers of free_pcppages_bulk" (Joshua Hahn)
Address long lock hold times at boot on large machines. These were
causing (harmless) softlockup warnings
"optimize the logic for handling dirty file folios during reclaim" (Baolin Wang)
Remove some now-unnecessary work from page reclaim
"mm/damon: allow DAMOS auto-tuned for per-memcg per-node memory usage" (SeongJae Park)
Enhance the DAMOS auto-tuning feature
"mm/damon: fixes for address alignment issues in DAMON_LRU_SORT and DAMON_RECLAIM" (Quanmin Yan)
Fix DAMON_LRU_SORT and DAMON_RECLAIM with certain userspace
configuration
"expand mmap_prepare functionality, port more users" (Lorenzo Stoakes)
Enhance the new(ish) file_operations.mmap_prepare() method and port
additional callsites from the old ->mmap() over to ->mmap_prepare()
"Fix stale IOTLB entries for kernel address space" (Lu Baolu)
Fix a bug (and possible security issue on non-x86) in the IOMMU
code. In some situations the IOMMU could be left hanging onto a
stale kernel pagetable entry
"mm/huge_memory: cleanup __split_unmapped_folio()" (Wei Yang)
Clean up and optimize the folio splitting code
"mm, swap: misc cleanup and bugfix" (Kairui Song)
Some cleanups and a minor fix in the swap discard code
"mm/damon: misc documentation fixups" (SeongJae Park)
"mm/damon: support pin-point targets removal" (SeongJae Park)
Permit userspace to remove a specific monitoring target in the
middle of the current targets list
"mm: MISC follow-up patches for linux/pgalloc.h" (Harry Yoo)
A couple of cleanups related to mm header file inclusion
"mm/swapfile.c: select swap devices of default priority round robin" (Baoquan He)
improve the selection of swap devices for NUMA machines
"mm: Convert memory block states (MEM_*) macros to enums" (Israel Batista)
Change the memory block labels from macros to enums so they will
appear in kernel debug info
"ksm: perform a range-walk to jump over holes in break_ksm" (Pedro Demarchi Gomes)
Address an inefficiency when KSM unmerges an address range
"mm/damon/tests: fix memory bugs in kunit tests" (SeongJae Park)
Fix leaks and unhandled malloc() failures in DAMON userspace unit
tests
"some cleanups for pageout()" (Baolin Wang)
Clean up a couple of minor things in the page scanner's
writeback-for-eviction code
"mm/hugetlb: refactor sysfs/sysctl interfaces" (Hui Zhu)
Move hugetlb's sysfs/sysctl handling code into a new file
"introduce VM_MAYBE_GUARD and make it sticky" (Lorenzo Stoakes)
Make the VMA guard regions available in /proc/pid/smaps and
improves the mergeability of guarded VMAs
"mm: perform guard region install/remove under VMA lock" (Lorenzo Stoakes)
Reduce mmap lock contention for callers performing VMA guard region
operations
"vma_start_write_killable" (Matthew Wilcox)
Start work on permitting applications to be killed when they are
waiting on a read_lock on the VMA lock
"mm/damon/tests: add more tests for online parameters commit" (SeongJae Park)
Add additional userspace testing of DAMON's "commit" feature
"mm/damon: misc cleanups" (SeongJae Park)
"make VM_SOFTDIRTY a sticky VMA flag" (Lorenzo Stoakes)
Address the possible loss of a VMA's VM_SOFTDIRTY flag when that
VMA is merged with another
"mm: support device-private THP" (Balbir Singh)
Introduce support for Transparent Huge Page (THP) migration in zone
device-private memory
"Optimize folio split in memory failure" (Zi Yan)
"mm/huge_memory: Define split_type and consolidate split support checks" (Wei Yang)
Some more cleanups in the folio splitting code
"mm: remove is_swap_[pte, pmd]() + non-swap entries, introduce leaf entries" (Lorenzo Stoakes)
Clean up our handling of pagetable leaf entries by introducing the
concept of 'software leaf entries', of type softleaf_t
"reparent the THP split queue" (Muchun Song)
Reparent the THP split queue to its parent memcg. This is in
preparation for addressing the long-standing "dying memcg" problem,
wherein dead memcg's linger for too long, consuming memory
resources
"unify PMD scan results and remove redundant cleanup" (Wei Yang)
A little cleanup in the hugepage collapse code
"zram: introduce writeback bio batching" (Sergey Senozhatsky)
Improve zram writeback efficiency by introducing batched bio
writeback support
"memcg: cleanup the memcg stats interfaces" (Shakeel Butt)
Clean up our handling of the interrupt safety of some memcg stats
"make vmalloc gfp flags usage more apparent" (Vishal Moola)
Clean up vmalloc's handling of incoming GFP flags
"mm: Add soft-dirty and uffd-wp support for RISC-V" (Chunyan Zhang)
Teach soft dirty and userfaultfd write protect tracking to use
RISC-V's Svrsw60t59b extension
"mm: swap: small fixes and comment cleanups" (Youngjun Park)
Fix a small bug and clean up some of the swap code
"initial work on making VMA flags a bitmap" (Lorenzo Stoakes)
Start work on converting the vma struct's flags to a bitmap, so we
stop running out of them, especially on 32-bit
"mm/swapfile: fix and cleanup swap list iterations" (Youngjun Park)
Address a possible bug in the swap discard code and clean things
up a little
[ This merge also reverts commit ebb9aeb980e5 ("vfio/nvgrace-gpu:
register device memory for poison handling") because it looks
broken to me, I've asked for clarification - Linus ]
* tag 'mm-stable-2025-12-03-21-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
mm: fix vma_start_write_killable() signal handling
mm/swapfile: use plist_for_each_entry in __folio_throttle_swaprate
mm/swapfile: fix list iteration when next node is removed during discard
fs/proc/task_mmu.c: fix make_uffd_wp_huge_pte() huge pte handling
mm/kfence: add reboot notifier to disable KFENCE on shutdown
memcg: remove inc/dec_lruvec_kmem_state helpers
selftests/mm/uffd: initialize char variable to Null
mm: fix DEBUG_RODATA_TEST indentation in Kconfig
mm: introduce VMA flags bitmap type
tools/testing/vma: eliminate dependency on vma->__vm_flags
mm: simplify and rename mm flags function for clarity
mm: declare VMA flags by bit
zram: fix a spelling mistake
mm/page_alloc: optimize lowmem_reserve max lookup using its semantic monotonicity
mm/vmscan: skip increasing kswapd_failures when reclaim was boosted
pagemap: update BUDDY flag documentation
mm: swap: remove scan_swap_map_slots() references from comments
mm: swap: change swap_alloc_slow() to void
mm, swap: remove redundant comment for read_swap_cache_async
mm, swap: use SWP_SOLIDSTATE to determine if swap is rotational
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Replace busylock at the Tx queuing layer with a lockless list.
Resulting in a 300% (4x) improvement on heavy TX workloads, sending
twice the number of packets per second, for half the cpu cycles.
- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue.
Normally we perform queue re-selection when flow comes out of idle,
but under extreme circumstances the flows may be constantly busy.
Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.
- Optimize the NAPI skb cache, make it larger, use it in more paths.
- Attempt returning Tx skbs to the originating CPU (like we already
did for Rx skbs).
- Various data structure layout and prefetch optimizations from Eric.
- Remove ktime_get() from the recvmsg() fast path, ktime_get() is
sadly quite expensive on recent AMD machines.
- Extend threaded NAPI polling to allow the kthread busy poll for
packets.
- Make MPTCP use Rx backlog processing. This lowers the lock
pressure, improving the Rx performance.
- Support memcg accounting of MPTCP socket memory.
- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor
fit for modern container workloads, where limits are imposed using
cgroups.
- Improve heuristics for when to kick off AF_UNIX garbage collection.
- Allow users to control TCP SACK compression, and default to 33% of
RTT.
- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid
unnecessarily aggressive rcvbuf growth and overshot when the
connection RTT is low.
- Preserve skb metadata space across skb_push / skb_pull operations.
- Support for IPIP encapsulation in the nftables flowtable offload.
- Support appending IP interface information to ICMP messages (RFC
5837).
- Support setting max record size in TLS (RFC 8449).
- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.
- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.
- Let users configure the number of write buffers in SMC.
- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.
- Some conversions away from the crypto_ahash API, from Eric Biggers.
- Some preparations for slimming down struct page.
- YAML Netlink protocol spec for WireGuard.
- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.
Driver API:
- Add CAN XL support to the CAN Netlink interface.
- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as
defined by the OPEN Alliance's "Advanced diagnostic features for
100BASE-T1 automotive Ethernet PHYs" specification.
- Add DPLL phase-adjust-gran pin attribute (and implement it in
zl3073x).
- Refactor xfrm_input lock to reduce contention when NIC offloads
IPsec and performs RSS.
- Add info to devlink params whether the current setting is the
default or a user override. Allow resetting back to default.
- Add standard device stats for PSP crypto offload.
- Leverage DSA frame broadcast to implement simple HSR frame
duplication for a lot of switches without dedicated HSR offload.
- Add uAPI defines for 1.6Tbps link modes.
Device drivers:
- Add Motorcomm YT921x gigabit Ethernet switch support.
- Add MUCSE driver for N500/N210 1GbE NIC series.
- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.
- Add (and convert most drivers to) a dedicated ethtool callback for
reading the Rx ring count.
- Significant refactoring efforts in the STMMAC driver, which
supports Synopsys turn-key MAC IP integrated into a ton of SoCs.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as
other drivers) to avoid wasting resources if feature is
unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules
- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor
format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device
- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices
- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control
- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality
- Bluetooth:
- add initial support for PASTa
- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211
debugfs interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements
- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support"
* tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits)
net: page_pool: sanitise allocation order
net: page pool: xa init with destroy on pp init
net/mlx5e: Support XDP target xmit with dummy program
net/mlx5e: Update XDP features in switch channels
selftests/tc-testing: Test CAKE scheduler when enqueue drops packets
net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop
wireguard: netlink: generate netlink code
wireguard: uapi: generate header with ynl-gen
wireguard: uapi: move flag enums
wireguard: uapi: move enum wg_cmd
wireguard: netlink: add YNL specification
selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py
selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py
selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py
selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py
selftests: drv-net: introduce Iperf3Runner for measurement use cases
selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS
net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive()
Documentation: net: dsa: mention simple HSR offload helpers
Documentation: net: dsa: mention availability of RedBox
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Rewrite memcpy_sglist from scratch
- Add on-stack AEAD request allocation
- Fix partial block processing in ahash
Algorithms:
- Remove ansi_cprng
- Remove tcrypt tests for poly1305
- Fix EINPROGRESS processing in authenc
- Fix double-free in zstd
Drivers:
- Use drbg ctr helper when reseeding xilinx-trng
- Add support for PCI device 0x115A to ccp
- Add support of paes in caam
- Add support for aes-xts in dthev2
Others:
- Use likely in rhashtable lookup
- Fix lockdep false-positive in padata by removing a helper"
* tag 'v6.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (71 commits)
crypto: zstd - fix double-free in per-CPU stream cleanup
crypto: ahash - Zero positive err value in ahash_update_finish
crypto: ahash - Fix crypto_ahash_import with partial block data
crypto: lib/mpi - use min() instead of min_t()
crypto: ccp - use min() instead of min_t()
hwrng: core - use min3() instead of nested min_t()
crypto: aesni - ctr_crypt() use min() instead of min_t()
crypto: drbg - Delete unused ctx from struct sdesc
crypto: testmgr - Add missing DES weak and semi-weak key tests
Revert "crypto: scatterwalk - Move skcipher walk and use it for memcpy_sglist"
crypto: scatterwalk - Fix memcpy_sglist() to always succeed
crypto: iaa - Request to add Kanchana P Sridhar to Maintainers.
crypto: tcrypt - Remove unused poly1305 support
crypto: ansi_cprng - Remove unused ansi_cprng algorithm
crypto: asymmetric_keys - fix uninitialized pointers with free attribute
KEYS: Avoid -Wflex-array-member-not-at-end warning
crypto: ccree - Correctly handle return of sg_nents_for_len
crypto: starfive - Correctly handle return of sg_nents_for_len
crypto: iaa - Fix incorrect return value in save_iaa_wq()
crypto: zstd - Remove unnecessary size_t cast
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull namespace updates from Christian Brauner:
"This contains substantial namespace infrastructure changes including a new
system call, active reference counting, and extensive header cleanups.
The branch depends on the shared kbuild branch for -fms-extensions support.
Features:
- listns() system call
Add a new listns() system call that allows userspace to iterate
through namespaces in the system. This provides a programmatic
interface to discover and inspect namespaces, addressing
longstanding limitations:
Currently, there is no direct way for userspace to enumerate
namespaces. Applications must resort to scanning /proc/*/ns/ across
all processes, which is:
- Inefficient - requires iterating over all processes
- Incomplete - misses namespaces not attached to any running
process but kept alive by file descriptors, bind mounts, or
parent references
- Permission-heavy - requires access to /proc for many processes
- No ordering or ownership information
- No filtering per namespace type
The listns() system call solves these problems:
ssize_t listns(const struct ns_id_req *req, u64 *ns_ids,
size_t nr_ns_ids, unsigned int flags);
struct ns_id_req {
__u32 size;
__u32 spare;
__u64 ns_id;
struct /* listns */ {
__u32 ns_type;
__u32 spare2;
__u64 user_ns_id;
};
};
Features include:
- Pagination support for large namespace sets
- Filtering by namespace type (MNT_NS, NET_NS, USER_NS, etc.)
- Filtering by owning user namespace
- Permission checks respecting namespace isolation
- Active Reference Counting
Introduce an active reference count that tracks namespace
visibility to userspace. A namespace is visible in the following
cases:
- The namespace is in use by a task
- The namespace is persisted through a VFS object (namespace file
descriptor or bind-mount)
- The namespace is a hierarchical type and is the parent of child
namespaces
The active reference count does not regulate lifetime (that's still
done by the normal reference count) - it only regulates visibility
to namespace file handles and listns().
This prevents resurrection of namespaces that are pinned only for
internal kernel reasons (e.g., user namespaces held by
file->f_cred, lazy TLB references on idle CPUs, etc.) which should
not be accessible via (1)-(3).
- Unified Namespace Tree
Introduce a unified tree structure for all namespaces with:
- Fixed IDs assigned to initial namespaces
- Lookup based solely on inode number
- Maintained list of owned namespaces per user namespace
- Simplified rbtree comparison helpers
Cleanups
- Header Reorganization:
- Move namespace types into separate header (ns_common_types.h)
- Decouple nstree from ns_common header
- Move nstree types into separate header
- Switch to new ns_tree_{node,root} structures with helper functions
- Use guards for ns_tree_lock
- Initial Namespace Reference Count Optimization
- Make all reference counts on initial namespaces a nop to avoid
pointless cacheline ping-pong for namespaces that can never go
away
- Drop custom reference count initialization for initial namespaces
- Add NS_COMMON_INIT() macro and use it for all namespaces
- pid: rely on common reference count behavior
- Miscellaneous Cleanups
- Rename exit_task_namespaces() to exit_nsproxy_namespaces()
- Rename is_initial_namespace() and make argument const
- Use boolean to indicate anonymous mount namespace
- Simplify owner list iteration in nstree
- nsfs: raise SB_I_NODEV, SB_I_NOEXEC, and DCACHE_DONTCACHE explicitly
- nsfs: use inode_just_drop()
- pidfs: raise DCACHE_DONTCACHE explicitly
- pidfs: simplify PIDFD_GET__NAMESPACE ioctls
- libfs: allow to specify s_d_flags
- cgroup: add cgroup namespace to tree after owner is set
- nsproxy: fix free_nsproxy() and simplify create_new_namespaces()
Fixes:
- setns(pidfd, ...) race condition
Fix a subtle race when using pidfds with setns(). When the target
task exits after prepare_nsset() but before commit_nsset(), the
namespace's active reference count might have been dropped. If
setns() then installs the namespaces, it would bump the active
reference count from zero without taking the required reference on
the owner namespace, leading to underflow when later decremented.
The fix resurrects the ownership chain if necessary - if the caller
succeeded in grabbing passive references, the setns() should
succeed even if the target task exits or gets reaped.
- Return EFAULT on put_user() error instead of success
- Make sure references are dropped outside of RCU lock (some
namespaces like mount namespace sleep when putting the last
reference)
- Don't skip active reference count initialization for network
namespace
- Add asserts for active refcount underflow
- Add asserts for initial namespace reference counts (both passive
and active)
- ipc: enable is_ns_init_id() assertions
- Fix kernel-doc comments for internal nstree functions
- Selftests
- 15 active reference count tests
- 9 listns() functionality tests
- 7 listns() permission tests
- 12 inactive namespace resurrection tests
- 3 threaded active reference count tests
- commit_creds() active reference tests
- Pagination and stress tests
- EFAULT handling test
- nsid tests fixes"
* tag 'namespace-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (103 commits)
pidfs: simplify PIDFD_GET_<type>_NAMESPACE ioctls
nstree: fix kernel-doc comments for internal functions
nsproxy: fix free_nsproxy() and simplify create_new_namespaces()
selftests/namespaces: fix nsid tests
ns: drop custom reference count initialization for initial namespaces
pid: rely on common reference count behavior
ns: add asserts for initial namespace active reference counts
ns: add asserts for initial namespace reference counts
ns: make all reference counts on initial namespace a nop
ipc: enable is_ns_init_id() assertions
fs: use boolean to indicate anonymous mount namespace
ns: rename is_initial_namespace()
ns: make is_initial_namespace() argument const
nstree: use guards for ns_tree_lock
nstree: simplify owner list iteration
nstree: switch to new structures
nstree: add helper to operate on struct ns_tree_{node,root}
nstree: move nstree types into separate header
nstree: decouple from ns_common header
ns: move namespace types into separate header
...
|
|
Remove stray spaces/tabs introduced with commit 56651128e2fb ("MIPS: Fix
idle VS timer enqueue") and add missing indentation for a branch delay
slot.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The function opencodes for_each_set_bit() macro, which makes it bulky.
Using the proper API makes all the housekeeping code go away.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Convert GPIO-connected buttons and LEDs on MTX1 board to software
nodes/properties, so that support for platform data can be removed
from gpio-keys driver (which will rely purely on generic device
properties for configuration).
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Remove unnecessary __GFP_HIGHMEM masking, which was introduced with
commit 3e14fb19ad7c ("mips: convert various functions to use ptdescs").
GFP_KERNEL doesn't contain __GFP_HIGHMEM.
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Since commit e424054000878 ("MIPS: Tracing: Reduce the overhead of
dynamic Function Tracer"), the macro UASM_i_LA_mostly has been used,
and this macro can generate more than 2 instructions. At the same
time, the code in ftrace assumes that no more than 2 instructions can
be generated, which is why it stores them in an int[2] array. However,
as previously noted, the macro UASM_i_LA_mostly (and now UASM_i_LA)
causes a buffer overflow when _mcount is beyond 32 bits. This leads to
corruption of the variables located in the __read_mostly section.
This corruption was observed because the variable
__cpu_primary_thread_mask was corrupted, causing a hang very early
during boot.
This fix prevents the corruption by avoiding the generation of
instructions if they could exceed 2 instructions in
length. Fortunately, insn_la_mcount is only used if the instrumented
code is located outside the kernel code section, so dynamic ftrace can
still be used, albeit in a more limited scope. This is still
preferable to corrupting memory and/or crashing the kernel.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Commit 41528ba6afe6 ("MIPS: DTS: Only build subdir of current platform")
broke building of all DTBs when CONFIG_OF_ALL_DTBS is enabled unless all
the various kconfig options were also enabled. The only effect that commit
had was getting rid of some harmless build lines such as:
AR arch/mips/boot/dts/mti/built-in.a
Those lines were part of the built-in DTB support. Since commit
04e4ec98e405 ("MIPS: migrate to generic rule for built-in DTBs"), how the
built-in DTBs are handled has changed and those lines are no longer
generated, so revert to the prior behavior.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
