| Age | Commit message (Collapse) | Author |
|
As of d64c732dfc9e ("net: rfkill: gpio: add DT support") rfkill-gpio
device can be instantiated via device tree.
Add the declaration there and drop board-paz00.c file and relevant
Makefile fragments.
Tested-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
All ASUS Transformers have micro-HDMI connector directly available.
After Tegra HDMI got bridge/connector support, we should use connector
framework for proper HW description.
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF T30
Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101 T20
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # ASUS TF201 T30
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add External Memory Controller node to the device-tree.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add support for ACTMON on Tegra114. This is used to monitor activity from
different components. Based on the collected statistics, the rate at which
the external memory needs to be clocked can be derived.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Both smartphones have capacitive buttons but only P895 supports RMI4
function 1A (0D touch), while P880 exposes buttons area as a region of the
touchscreen.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add missing charger, MUIC and ADC sensor nodes. Reconfigure USB, set one
of the ADC channels as the fuel gauge temperature sensor and add a battery
thermal zone.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add RGB-DSI bridge and panel nodes to LG Optimus 4X and Vu device trees.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Adjust panel node in Tegra Note 7 according to the updated schema.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add SOCTHERM and thermal zones nodes into common Tegra 4 device tree.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add missing nvidia,mipi-calibrate and cells properties to DSI nodes.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The Mi Pad is a tablet computer based on Nvidia Tegra K1 SoC which
originally ran the Android operating system. The Mi Pad has a 7.9" IPS
display with 1536 x 2048 (324 ppi) resolution. 2 GB of RAM and 16/64 GB
of internal memory that can be supplemented with a microSDXC card giving
up to 128 GB of additional storage.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add CSI node to Tegra20 and Tegra30 device trees.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add nodes for devices on the HOST1X bus: VI, ISP, ISPB, MSENC and TSEC.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add nodes for devices on the HOST1X bus: VI, EPP, ISP, MSENC and TSEC.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Factor out common part from ASUS Eee Pad Transformer TF101 device tree
into tegra20-asus-transformer-common.dtsi and add device tree fragment for
ASUS Eee Pad Slider SL101.
Tested-by: Winona Schroeer-Smith <wolfizen@wolfizen.net> # ASUS SL101
Tested-by: Antoni Aloy Torrens <aaloytorrens@gmail.com> # ASUS TF101
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Correct audio-codec interrupt should be PX3 while PX1 is used for external
microphone detection.
Tested-by: Winona Schroeer-Smith <wolfizen@wolfizen.net> # ASUS SL101
Tested-by: Antoni Aloy Torrens <aaloytorrens@gmail.com> # ASUS TF101
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add missing interrupt to magnetometer node.
Tested-by: Winona Schroeer-Smith <wolfizen@wolfizen.net> # ASUS SL101
Tested-by: Antoni Aloy Torrens <aaloytorrens@gmail.com> # ASUS TF101
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add DFLL clock node to common Tegra114 device tree along with clocks
property to cpu node.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Existing touchscreen clipping is too small and causes problems with
touchscreen accuracy.
Signed-off-by: Jonas Schwöbel <jonasschwoebel@yahoo.de>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add embedded controller node to Pegatron Chagall device-tree.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250429061803.9581-5-clamor95@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add a device-tree for the Asus Portable AiO P1801-T, which is a NVIDIA
Tegra30-based 2-in-1 detachable tablet, originally running Android.
The tablet was also sold together with a PC docking station as the
Transformer AiO P1801.
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # P1801-T with dock
Co-developed-by: Maxim Schwalm <maxim.schwalm@gmail.com>
Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250616073947.13675-3-clamor95@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add device-tree for ASUS VivoTab RT TF600T, which is NVIDIA Tegra30-based
tablet device with Windows RT.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250617070320.9153-3-clamor95@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The compatible "plx,pex8605" does not exist, there is no DT binding for
it and there was never a driver matching this compatible, remove it.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20250410063919.11199-1-francesco@dolcini.it
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add device-tree for ASUS Transformer Pad LTE TF300TL, which is NVIDIA
Tegra30-based tablet device.
Co-developed-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250503102950.32744-4-clamor95@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
binding
Rename the apbdma nodename from "dma@" to "dma-controller@" to align with
linux common dma-controller binding.
Signed-off-by: Charan Pedumuru <charan.pedumuru@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20250507-nvidea-dma-v4-1-6161a8de376f@gmail.com
[treding@nvidia.com: adjust subject prefix for consistency]
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Bind al3000a illuminance sensor found in ASUS TF101
Tested-by: Robert Eckelmann <longnoserob@gmail.com>
Tested-by: Antoni Aloy Torrens <aaloytorrens@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250217140336.107476-4-clamor95@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Bind DSI devices and MIPI calibration.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250226105615.61087-6-clamor95@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add HDA device binding.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250226105615.61087-5-clamor95@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add ARM PMU node for Tegra114 like it is done for Tegra30 and Tegra124.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250226105615.61087-4-clamor95@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
PLLD is usually used as parent clock for internal video devices, like
DSI for example, while PLLD2 is used as parent for HDMI.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250226105615.61087-3-clamor95@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
USB ports are turned on by the firmware as it looks for disks to boot,
ensure that they aren't power cycled before the xHCI driver comes up.
This enables USB devices to be ready for use faster and reduces wear
and risk of data loss on storage devices. A particularly annoying case
was booting from a mechanical disk, which takes time to spin up again.
Vendor kernel also kept these ports powered, and by the same means.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Pins responsible for controlling these LEDs need to have tristate
control removed if we want them as GPIOs. This change aligns with
pinmux configuration of "dte" pin group in downstream kernel[1].
These LEDs had no function assigned on vendor kernel and there is no
label on the case, the only markings are on PCB which are part of node
names (ds1 marking is on power LED controlled by PMIC), so generic term
is assigned as the function.
1. https://github.com/compulab/trimslice-android-kernel/blob/upstream/arch/arm/mach-tegra/board-trimslice-pinmux.c#L45
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Fixes issue when resuming after suspend made USB in peripheral
mode inaccessible.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Downstream kernel states that backlight has no actual enable GPIO
and uses fixed regulator.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Group GPIO keys into keys and switches.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add MMC nodes configuration along with WIFI binding to ASUS TF701T
device-tree.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
With these changes sound works, only UCM configs are needed for
complete support.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Complete and adjust magnetometer, thermal sensor, motion tracker,
power and light sensors according to available sources.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add serial node along with bluetooth node to ASUS TF701T device-tree.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add HDMI nodes to ASUS TF701T device-tree.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add missing parts of PMIC complex, extend PMC binding and add missing
fixed regulators. Additionally, refresh naming to better reflect
regulator purpose.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add Video Decoder Engine node to ASUS TF701T device-tree.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Mimic original downstream board behavior to set up all pinmux at once.
Per-device pinmux is good but we have no complete board schematics
to allow such luxury.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Replace "gpio" suffix with "gpios" for tegra20-ac97 DTS as the "gpio"
suffix is deprecated.
Signed-off-by: Mohammad Shehar Yaar Tausif <sheharyaar48@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The same table as ram-code 0 operates correctly on ram-code 1
v2: rebase on current kernel
Signed-off-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
ARM: tegra: Device tree changes for v6.9-rc1
Add support for the LG Optimus 4X HD and LG Optimus VU devices and clean
up some minor issues.
* tag 'tegra-for-6.9-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Add device-tree for LG Optimus 4X HD (P880)
ARM: tegra: Add device-tree for LG Optimus Vu (P895)
ARM: tegra: nexus7: Add missing clock binding into sound node
ARM: tegra: Enable cros-ec-spi as wake source
Link: https://lore.kernel.org/r/20240223174849.1509465-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add device-tree for LG Optimus 4X HD P880, which is a NVIDIA
Tegra30-based smartphone, originally running Android.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add device-tree for LG Optimus Vu P895, which is a NVIDIA
Tegra30-based smartphone, originally running Android.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
A recent rt5640 codec update requires mclk definition in the
device tree. Without mclk defined sound will not work.
Signed-off-by: Robert Eckelmann <longnoserob@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The dtc interrupt_provider warning is off by default. Fix all the warnings
so it can be enabled.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> #Broadcom
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20240213-arm-dt-cleanups-v1-2-f2dee1292525@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|